Help with errors on opening Dreamweaver

On opening DW (v. CS3), I get an error message that says:
quote:
The following translators were not loaded due to errors:
XSLTransform.htm: has configuration information that is invalid"
It takes a couple of times of clicking "OK" to get that one
to disappear, then I get:
quote:
"While executing onLoad_in -onOpen.htm the following
Javascript error(s) occurred: In file ""_onOpen"": Reference Error"
onOpen is not defined.
It also takes a few clicks of the OK button to get that one
to disappear too.
I also get these messages when trying to open, save or close
individual pages.
Not sure how much information is needed to troubleshoot this
- but here goes:
I have one site, all pages are based on a template
I'm a novice, using a downloaded template which I tweaked to
suit the needs of my agency.
The site has been working just fine for the past 2 or 3
weeks, this is a recent problem, and I'm not sure what I did
immediately prior to it occurring ... I first noticed it when I
went to open DW to make some edits to our website (www.mccainc.org)
Thanks for any help anyone can offer!
Vikki
@ MCCA Inc.

If that fails to solve the problem, then I recommend you
contact Adobe
directly and use one of your one-on-one support incidents.
http://www.adobe.com/support/programs/dreamweaver/index.html?tab:contact=1
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"MCCA_Vikki" <[email protected]> wrote in
message
news:g4at1e$mra$[email protected]..
> Thanks for your reply, I tried to work through the
available solutions,
> but I
> can't seem to get anything to work. The error is
occurring at startup of
> the
> program, and not with any particular site (I only have
one).
>
> I can't locate a .dws cache file to delete.
>
> I'll keep trying to work on this, but if anyone has any
other ideas in the
> meantime, I'd love to hear your suggestions.
>
> Thanks!
> Vikki
>

Similar Messages

Help with error message opening lightroom 5 on macbook?

I downloaded lightroom 5 on my macbook. i have os-lion. When I open the program and error message appears saying " error switching modules". I am missing all the options to import photos. When I try to click on lightroom preferences at the top of the screen nothing pops up. It seems like i am missing some of the options and the navigation pane. Do i need to update something else to be able to import photos and click between module pages?

55AB,
It appears the error message you have is an ink system failure error message. While it looks like your printer needs to be services there is also a thread with some suggestions out there with some results for this same issue. I have linked this thread this post. You will want to look at message 16 and 17 for what seems to be a resolution for your same printer. Hope this helps.
http://h30434.www3.hp.com/t5/Other-Printing-Questions/error-message-0xc19a0035-quot-ink-system-failu...
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

Documents backup failure in commvault with error Cannot open file ReportViewer.dwp

Hi,
SharePoint Documents backup failure in commvault with error "Cannot open file ReportViewer.dwp" even all necessary permissions are available for all the sites , sql

Hi Praveen,
Whether you tried to backup the library using PowerShell exporting command.
Export sites, lists, or document libraries in SharePoint 2013:
http://technet.microsoft.com/en-us/library/ee428301(v=office.15).aspx
As the commvault is a third party tool and I am not familar with it, I suggest you ask the third party support or forum for help.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Help with error 16820

help with error 16820 with trying to update acrobat

Please refer to following links, might be helpful.
http://answers.acrobatusers.com/While-updating-acrobat-error-code-showd-16820-solve-q7115. aspx
http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/acrobat-co m-will-not-update-getting-error-16820/7bbbef64-df3e-4fbd-b552-fc1c7a5983c3?msgId=dcf838d8- a198-4a3a-b034-94a07c2e8648
If this doesn't work, we need more information here.

Need help with error message 213:8

Need help with error message 213:8, this error message prompted after re-installing CS5.5 on the same machine (W7 Pro)
Thanks.

Hi TKA_,
Please try the solutions mentioned on following forum thread.
http://support.muse.adobe.com/thread/1305941?start=0&tstart=0
Let me know if it works?
Regards,
Sumit Singh

Adobe help with error FF2F571A-6C54-31E3-B23E-2A60283B08A8

Adobe help with error FF2F571A-6C54-31E3-B23E-2A60283B08A8

Nobody can tell you anything without proper system info or other technical details. What you posted is merely an identifier of the error report sent to Adobe, but that is locked away safely on teh servers and nobody here has access to it.
Mylenium

Seriously Need Help With Lightbox Widget In Dreamweaver

Hi guys, I seriously need your help with this widget.
I'm not exactly new to Dreamweaver and I've been working on a particular website. Everything was going well until I dropped the Lightbox widget into the page.
Lightbox gallery displays, but opens images in a new window on its own. Here's an example;
http://imagesbylady.co.nz/photomike/HTML/promogallery.html
Yet, when I drop the widget into a completely separate page from the website, it works absolutely fine. Like here;
http://imagesbylady.co.nz/photomike/HTML/testing.html
I have exhausted this entire forum on the subject. I don't understand how the widget can work on a blank html page but when dropped into an already designed webpage, it breaks....!
If you need to have a look at the coding so you can help me further let me know. I've been on this for a total of 11 hours and I still can't figure out what the problem is. Seriously....i'm nearly close to tears! ;-(
If you could help me out I would be forever grateful.
Lots of Love
Lady xx

Hi guys, I seriously need your help with this widget.
I'm not exactly new to Dreamweaver and I've been working on a particular website. Everything was going well until I dropped the Lightbox widget into the page.
Lightbox gallery displays, but opens images in a new window on its own. Here's an example;
http://imagesbylady.co.nz/photomike/HTML/promogallery.html
Yet, when I drop the widget into a completely separate page from the website, it works absolutely fine. Like here;
http://imagesbylady.co.nz/photomike/HTML/testing.html
I have exhausted this entire forum on the subject. I don't understand how the widget can work on a blank html page but when dropped into an already designed webpage, it breaks....!
If you need to have a look at the coding so you can help me further let me know. I've been on this for a total of 11 hours and I still can't figure out what the problem is. Seriously....i'm nearly close to tears! ;-(
If you could help me out I would be forever grateful.
Lots of Love
Lady xx

How do I fix a javascript error when opening Dreamweaver?

DW CS6 recently started having 2 JavaScript errors while opening the application and at least 1 additional JavaScript error when using the Insert Image command. Can someone provide some advice on fixing this issue?

This will help -
Index to Dreamweaver FAQ
Look at the very first issue.

HELP WITH ERROR 2095

Can any one help me with error message 2095 on quicktime? i have tryed to uninstall it with add/remove programs but it says the following file does not exist or is not a valid uninstallation log file C:\WINDOWS\system32\quicktime\uninstall.log
???!!!??? and because of this i can not open itunes and everytime i try to it tells me that itunes as ran into a problem and has to close
i have read online that i can uninstall quicktime manually with safemode or something like that but i have no idea how to, so if any one at all has any helpful advice please reply
thanks

I posted this link to you yesterday, did it not work?
http://discussions.apple.com/thread.jspa?threadID=799482&tstart=15
Safe Mode is probably not going to be of much help. If the computer was re-starting on its own than it would help to stabilize the computer(in safe mode) to remove the driver causing it to re-start, your able to access the computer.

Help with Errors please!

Hi, I'm building a Flash website.
I've used frames with names to contain the different 'pages'
of the site. On the frame called 'SVHS1' I've built an XML mp3
player with buttons and a volume slider.
I'm having a couple of problems with this section of the
site.
Firstly: when I 'test movie' and navigate to the mp3 player
section it all works fine, the mp3s load correctly, the playback
controls work fine, and the volume slider does what it's supposed
to do. But if I've used the volume slider to adjust the volume (and
only then) and then navigate to the next frame 'SVHS2' (or any
frames that are later in the main timeline) I get multiple
occurrences of the following error in the output pane:
TypeError: Error #1009: Cannot access a property or method
of a null object reference.
At PSPWebsite1_fla::MainTimeline/adjustVolume()
I understand (from reading other posts/help etc.) in
principle what is causing this, but my knowledge of AS3 is too
limited to know exactly what is wrong with my script or how to fix
it.
Secondly: if I press the stop button on my mp3 player and
then navigate to another frame (any frame before or after
‘SVHS1’) the site works fine, and the mp3 player works
perfectly if I go to that frame again. But if I navigate to another
frame without first stopping the song it continues to play even
though I’m not on the mp3 player frame, and if I go back to
the mp3 player before the song has finished it starts playing
automatically from the beginning of the first song in the XML list
again and simply doubles up the sound, which is horrible. When this
happens the playback controls only affect the 2nd version
(understandably).
I think this is probably quite simple to fix, assuming that I
have to write some script that tells the mp3 player to stop playing
if/when the user navigates away from that frame...but I don’t
know how to do this.
Any help with either of the above would be much appreciated.
The attached script is for the mp3 player frame.

You can consider the trace function as being a "can you hear
me now" helper (instead of an annoying tv commercial gimmick). It
displays whatever it's told to in the same output window that you
see that error message come up in. There are two ways I'll usually
use it.
I'll often end up simply using a trace("here"); as a means of
seeing where a process is getting hung up. I gradually move that
line of code thru what I know to be the step by step sequence of
the code until "here" no longer shows up. It normally indicates
that the preceding line of code is where the ball got dropped.
In AS3, which is often a little more helpful when it trips on
something, such as the error message you received which tells you
there's a problem in the adjustVolume function, you can use it to
see what element in that function is either undefined or out of
scope.
Place... trace(vol); ... just after the first line of code in
that function to see if vol is a number. If it is, then you know
that line is okay and you can move on to check the next line. If it
isn't a number, then move the trace before that line and change it
to... trace(volume_mc.slider_mc.x); ... and see if it is a value.
If it isn't, then change the trace to check to see what
trace(volume_mc); results in.... so on and so on.
It's basically a process of working your way thru code to
narrow down what piece is the undefined/out-of-scope (or a syntax
error) element that is causing the problem.

Please help with error message while trying to update i tunes

Errors occurred while installing the updates, if the problem persists, choose tools, download only and installing manually

When i try and download i-tunes i get a message about URBCHN1 not being a win32 command, or something similar.
... that's an unusual one.
could you possibly send us a screenshot of the error message box? for instructions, see the following user tip:
hudgie: Taking screenshots to help with problems

Help with error U44M1I210(unable to extract . . . . .) Also file location of Camera Raw in PS CC and location of compressed CC downloads

Adobe has not been a big help with this. If anyone knows what might be causing this error - great, pls post. Otherwise, in order to work the problem myself, I need to know the file locations of Camera Raw within PS CC and also the file location of where Adobe CC places the d/l'd compressed version. Thanks much, Gerry

U44M update error http://forums.adobe.com/thread/1289956
--more U44.. discussion http://forums.adobe.com/thread/1275963

Help with error on procedure

Error is
ORA-06550: line 1, column 71:
PLS-00103: Encountered the symbol ">" when expecting one of the following:
. ( ) , * @ % & = - + < / > at in is mod remainder not rem
<an exponent (**)> <> or != or ~= >= <= <> and or like like2
like4 likec between || multiset member submultiset
ORA-06550: line 1, column 71:
PLS-00103: Encountered the symbol ">" when expecting one of the following:
. ( ) , * @ % & = - + < / > at in is mod remainder not rem
<an exponent (**)> <> or != or ~= >= <= <> and or like like2
like4 likec between || multiset member submultiset
The problem is I don't have < or > in my procedure. The error shows when I call procedure from c# using OleDb provider. Any help with this. The procedure works fine from sql developer.

Hi Marcus ,
I did the same thing on my database based on the script you had given.
Please go through it.
SQL> create table location(location_number number, location_id number, usage_id number);
Table created.
SQL> insert into location values(10,20,30);
1 row created.
SQL> insert into location values(11,21,31);
1 row created.
SQL> create table usage( usage_number number, usage_id number);
Table created.
SQL> insert into usage values(50,30);
1 row created.
SQL> insert into usage values(60,40);
1 row created.
SQL> commit;
Commit complete.
SQL> create or replace
PROCEDURE P_GET_ALL(
p_place in number,
2 p_location out number,
3 4 p_usage out number)
5 6 is
begin
7 select loc.location_number into p_location from location loc where
8
loc.location_id=p_place;
select us.usage_number into p_usage from usage us where us.usage_id=(select
loc.usage_id from location loc where loc.location_id=p_place);
end; 9 10 11 12 13 14
15 /
Procedure created.
Hope it would help you. :)
Thanks,
Balaji K.

Need help with error: No bootable device -- insert boot disk and press any key

Hello, I need help will my laptop and the error, the message says "no bootable device ", I have tried taking out the hard drive but it still doesn't work. My laptop is a Satillite C55D-A5372. I need help with this; if you know about this ans know how to fix it please reply or email me @ [email protected]
If needed more clarifications ask me.
Thank you,
Jkmano

if you got into the bios/uefi and have determined that the hdd is being detected then that is good. At least the hdd is operating to some extent, although still may be corrupt OS or the like.
Eagle asked you what OS your using (i.e., Windows 8.1 64-bit, Windows 7 32-bit, etc.). I see that English is not your native language so we'll just have to work with that as best we can.
Did you make any changes to the operating system (OS) as a result of the link you posted, and what were they?
L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

Need help with error code 150:30

need help with finding out what error code 150:30 is and how to fix it

See the following:
Error 150:30 - Error "Licensing has stopped working" | Mac OS :
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html

Help with errors on opening Dreamweaver

Similar Messages

Maybe you are looking for