Help with Ethernet broadband please
Forgive me for asking what are probably simple questions - but I am having trouble with Ethernet broadband and I cant find answers anywhere ( including from my ISP ) . Thanks in advance for any help here !
I have a blue and white 700 MHZ g3 imac running OSX 10.2.8 and OS 9.2 . I recently had Ethernet broadband hooked up - it connects to the net for a couple minutes , then wont receive for hours, then works for an hour, then not, etc. The ISP says that the D-Link router they installed is getting a continously strong signal - that they cant see anything wrong from thier end . The guys who installed the receiver thing-ey on the outside of my house also configured the Ethernet setup . Should I re-set up all that ? What do I need to know from the ISP to do that ? Do I have to boot up in OS9 and set up the Ethernet there also ?
I dont have an Airport card but that shoul;dnt matter right ? I only have the one computer .
Please post in the CRT iMac discussions. Thank you.
Similar Messages
-
Help with access control please
So I'm trying to set up my brother's PSP to the wirless network through MAC address timed access. What I want to do is make it so that he can only access it through certain times in the day. I'm having troubles with actually getting it to work. Everytime I set it up, the PSP only show's up as a DHCP client and not a Wireless client. I tried the option panel with the add wireless clients through the first try access. Could I get some help with this issue please? Thanks!
Just to calm your fears... There is no conspiracy. If someone had an answer or a suggestion they would post it.
-
Can anyone help with this?
Have a black powerbook, snow leopard, safari. No problems at all with wireless/ethernet at home
When at work, usually just unplug ethernet from work PC and once plugged into mac, it automatically detects internet connection just like that
For some reason, tonight, when I try this have no connection (an exclamation mark over the airport icon) and when I go into network in sys pref, says "self assigned ip address"
If I switch to DHCP manually, can input ip address from PC and it works fine but whenever i try and switch to automatic, it wont work
Have spent ages looking through the internet to try and find answer - firewall is off, no recent changes to software/hardware, flushed ipfw, etc
Any bright ideas?
Thanks a lotI am a bit confused by your post. Are you trying to connect to your network wirelessly using the AirPort card, or are you trying to use a wired connection via your Ethernet port?
What is the source of your Internet connection? DSL? Cable modem? Something else?
Are you connected to a router? What make and model?
Best of luck. -
Hi, i really need some help with my pictures, I've only got a very basic understanding of how my phone works and have somehow put a load of albums on my phone when i plugged it into the computer-I want to delete some of them off the phone but cannot work out how to do it, when i plug my phone in i can find the photo tab but cannot actually see the pictures and can't see any delete button!!! Please can someone help me, basic explanations would be gratefully recieved xxxx
The photo sync is one way: computer to phone. To remove photos, synced to your phone, remove the check marks next to the albums/folders under the photos tab in itunes & hit the apply/sync button. They will be removed from your phone. You cannot delete photos that were synced to your phone, directly on your phone. The easiest way to manage photos synced to your phone is to create albums or folders on your computer. Move whatever photos you want on your phone into these albums/folders & then select them under the photos tab in itunes to sync to your phone. You can then remove or add photos to these various albums/folders on your computer & the itunes sync process will update your phone every time you sync.
-
Help with Validation Problem Please
I don't understand this validation and don't know how to fix it. I have checked my other websites and they seem fine. I don't think I have done anything different The link for the website ishttp://www.greenpatchwebsites.com/pow/index.html
and the validator is http://validator.w3.org/check?uri=www.greenpatchwebsites.com%2Fpow%2Findex.html&charset=%2 8detect+automatically%29&doctype=Inline&group=0
Please can you help.
Thank you very much in advance.Thanks for that. I have tried it on a new page: http://www.greenpatchwebsites.com/pow/newtest.html and here is the validator :
http://validator.w3.org/check?uri=www.greenpatchwebsites.com%2Fpow%2Fnewtest.html&charset= %28detect+automatically%29&doctype=Inline&group=0&No200=1- unfortunately loads of errors
I also tried the recommended template:
Use the following markup as a template to create a new XHTML 1.0 document using a proper DOCTYPE. See the list below if you wish to use another document type.
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
<head>
<title>An XHTML 1.0 Strict standard template</title>
<meta http-equiv="content-type"
content="text/html;charset=utf-8" />
<meta http-equiv="Content-Style-Type" content="text/css" />
</head>
<body>
<p>… Your HTML content here …</p>
</body>
</html>
but was getting errors with that. As you can tell, I need serious help with this. Which doc type should I be using
and why doesn't Dreamweaver just do it for you when you select one?
Thanks very much again in advance. -
A week ago I was on Option 1 but due to heavy use my speed was reduced to 15.7k/sec !.I was advised to upgrade to Option 3 which I promptly did and that was done on the 29th(last week).
My speed though is still 15k/sec and I cannot watch any streaming video or BBC News Channels etc
Would some kind gentleman please look into it for me and advise.......thankyou
Solved!
Go to Solution.Hi Pete,
I am sorry for the delay in getting back to you. I picked your email up this morning and have dropped you a reply. I am pleased that you managed to sort this out, if you need any further help just let me know.
Cheers
Sean
BTCare Community Manager
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-) -
Help with Windows Sharing Please
Hello,
I am new to Mac and this is my first mac book 17 running Mac OS X 10.4.8 pro i've purchased through work. I only recieved this 2 days ago. I am having a problem connecting to my windows 2003 active server / domain controller at work and I am having a problem connecting to my windows xp computer share at home when i take my laptop home with me.
At work I am connecting to my network via wired built in ethernet with the following ip
IP - 10.43.144.190
SN - 255.255.240.0
GW - 10.43.144.2
DNS1 - 10.43.144.80 - This is my primary Domain controller DNS
DNS2 - 10.43.144.81 - This is my secondary Domain controller DNS
I also have parralels installed running windows xp for my proprietary software that only run on xp with the following address
IP - 10.43.144.191
SN - 255.255.240.0
GW - 10.43.144.2
DNS1 - 10.43.144.80 - This is my primary Domain controller DNS
DNS2 - 10.43.144.81 - This is my secondary Domain controller DNS
the only difference is that my ip has change.
The problem that i am having is when i go to the finder and network i see all my computers on the network even my windows server. but it won't let me connect. i get an error the the alias no longer exsits do i want to fix or delete.
So i try installing directory access plug-in via directory access and when i go to connect to my domain controller i get an error that it cannot find or resolve my domain name.
Know if your familiar with stupid windows in order for you to connect to AD your computer must be able to resolve the domain name via DNS. to when i go to ping my domain name eg. my.company.com i get an error cannot resolve. but when i ping the ip address it sees the server.
So the first problem that i see with mac is that for some reason it resolves the ip address but i need it to resolve the domain name, and i can't for the life of me figure out how to do this.
and if your answer is to modify the hosts file - i tried that and if your familiar with windows networking that won't work on windows machines either - again STUPID WINDOWS.
So in short how do i connect to my 2003 AD Server.
The reason i know that my laptop will connect to my domain is that remember i installed parralels on this macbook with windows xp. well guess what - you got it, I connect to my domain. so i know that it isn't a hardware issue or a network issue its a mac issue.
Finally i am having the same problem at home connecting to my network via the airport. I see my computer but cannot connect to my computer with windows xp shares. Any suggestions?
If anyone could help me it would be much appreciated. I tried calling MAC support and they were no use. They said they were transfering my problem to the engineers. and then they said that they couldn't help me becuase its beyond their scope of repairs. but if its a mac os x problem how can it be beyond their repair? I mean come on I purchased this mac for work, told by the sales man that i would have no problems and that mac support is there for me if i cannot connect but they seem like they aren't. I could've went and purchased a dell and not have this headache of connecting to my server of workstation.
Again sorry for the ranting but if anyone can help me out it would be much appreciatedNot to sure how to direct you with your issue at home, but here is some help with the server at work.
As I know it, you have two routes. You are obviously (to me) familiar with networking so you might already know that you can install File Services for Macintosh on the server. It's a component of Windows Server that allows you to connect Macs via AFP to the server. Just install it, share a folder and connect via AFP. Easy, but the drawback is that you are limited to 31 character filename lengths on the Mac share.
I am assuming you want to stay SMB. For that, you need to disable SMB signing on the server via a Group Policy. Here is a link describing that:
http://simultaneouspancakes.com/Lessons/archives/2004/12/howtodisable.shtml
Also, Microsoft has an article on binding a Mac to the domain. It's not necessary, but you can do it if you want to get Active Directory working between the Mac and the server. It will require that the long username for an Admin user on the Mac be exactly the same as a user on the Windows network. If it's different, it won't bind.
I don't know how that will affect your laptop when in use at home.
Hope that helps. -
Help with button code please?
I am a novice and have just completed my first animated movie. I need help with action script.
The movie is currently looped and I have created and invisible button the size of the frame with the intention that a user can click on the movie image to stop it and on second click continue the movie from where it stopped.
I have used the AS event handler method to stop the movie. I have tested it and it works. But I cannot figure suitable code to restart the movie.
Two questions;
1. am I going about the task the right way? (should I use two buttons, one stop, one start)?
2. if my approach is feasible, can anyone give me the correct AS to re-start the movie and put me out of my misery please?you can use the following after changing "yourbutton" and "yourmovieclip" to use suitable instance names:
yourbutton.onRelease=function(){
if(!this.toggle){
yourmovieclip.stop();
} else {
yourmovieclip.play();
this.toggle=!this.toggle; -
Help with Required fields-PLEASE
I have been attempting to get help with a required field and one of the forum helpers said he got it to work for me but I cannot and I have not been able to get any more responses from him to help me further.
I am attempting to have a radio box when the YES is selected to require another field to be completed. The script I was provided with is:
getField("Location").required = (getField("Group1").value == "Yes");
Location being the field that I require to be filled in if Group 1 is Yes. The previous forum helper indicated that I had to have this script in both fields in Group 1 and when I do that, nothing different happens.
What am I doing wrong?
Please, I need to fix this right away and I will be using this java script on many other forms that I have so I need to get this done soon.
Thank you in advance.Wht you want can get somewhat complicated. One way to prevent subsequent fields from being used is to set them to read-only and/or hidden. You could then use the Validate event of the text field to validate the entry and enable the subsequent fields if it is filled-in adequately. In general, you should also reset the fields whenever you hide them, so they don't contain potentially invalid data from previously being filled-in. So you could initially have the fields set to be hidden, and only unhide them if No is selected, or if Yes is selected and the required text field is filled-in.
I realize this may not be as helpful as you had hoped for, but I can't suggest specific code without knowing more about the form. -
Hi experts!
I have a requirement and I need help with an abap routine.
I'm uploading a table from de ECC where each record contains one key figure per fiscal period (wlt01, wlt02,...wlt16). I need to have in a dso a unique key figure (called zwlt for instance) and the 0fiscper infoobject filled with the corresponding period, that is, for each record of the table, I need 16 records in the DSO with zwlt = wltXX and the fiscper = fiscyear&0&XX.
Any help please?
Thanks in advance.there are multiple ways to handle this.
one way is to use APD to unpivot the data.
or else you can use the following sample code to derive what you want...this code might just hint at the way to proceed.
TYPES:
BEGIN OF tys_SC_1,
wlt01 TYPE P LENGTH 8 DECIMALS 2,
wlt02 TYPE P LENGTH 8 DECIMALS 2,
wlt03 TYPE P LENGTH 8 DECIMALS 2,
wlt04 TYPE P LENGTH 8 DECIMALS 2,
wlt05 TYPE P LENGTH 8 DECIMALS 2,
wlt06 TYPE P LENGTH 8 DECIMALS 2,
wlt07 TYPE P LENGTH 8 DECIMALS 2,
wlt08 TYPE P LENGTH 8 DECIMALS 2,
wlt09 TYPE P LENGTH 8 DECIMALS 2,
wlt10 TYPE P LENGTH 8 DECIMALS 2,
wlt11 TYPE P LENGTH 8 DECIMALS 2,
wlt12 TYPE P LENGTH 8 DECIMALS 2,
END OF tys_SC_1.
DATA: ls_type TYPE tys_SC_1,
l_name TYPE string,
l_count Type n length 2.
FIELD-SYMBOLS:
<fs_type> TYPE tys_SC_1,
<result> TYPE P .
ls_type-wlt01 = '1.1'.
ls_type-wlt02 = '2.2'.
ls_type-wlt03 = '3.3'.
ls_type-wlt04 = '4.4'.
ls_type-wlt05 = '5.5'.
ls_type-wlt06 = '6.6'.
ls_type-wlt07 = '7.7'.
ls_type-wlt08 = '8.8'.
ls_type-wlt09 = '9.9'.
ls_type-wlt10 = '10.1'.
ls_type-wlt11 = '11.11'.
ls_type-wlt12 = '12.12'.
CLEAR: l_count , l_name.
l_count = '01'.
ASSIGN ls_type TO <fs_type> .
Write: / .
DO 12 TIMES.
clear: l_name.
Concatenate 'wlt' l_count into l_name.
ASSIGN COMPONENT l_name OF STRUCTURE <fs_type> TO <result> .
Write: / , l_name , ' = ' , <result>.
l_count = l_count + 1 .
ENDDO.
hope it helps.
Regards
Ashwin -
Help with UILabel subclass please
Hello all... I have a UILabel subclass I call CustomLabel. Ive been googling and reading the apple docs this entire week to figure this out. The few examples Ive seen, I dont think Im doing it right.
Im trying to create a subclass to use throughout my project. Every label will have these properties so I figured why not subclass. So through a lot of trial and error I ended up with this...
CustomLabel.h
#import <UIKit/UIKit.h>
@interface CustomLabel : UILabel {
@property (nonatomic) CGSize shadowOffset;
@property (nonatomic) UITextAlignment *textAlignment;
@property (nonatomic, retain) UIColor *shadowColor;
@property (nonatomic, retain) UIColor *textColor;
@property (nonatomic, retain) UIColor *backgroundColor;
@property (nonatomic, retain) UIFont *font;
@end
CustomLabel.m
#import "CustomLabel.h"
#import "Constants.h"
@implementation CustomLabel
@synthesize textColor;
@synthesize backgroundColor;
@synthesize font;
@synthesize shadowColor;
@synthesize shadowOffset;
- (id)initWithFrame:(CGRect)frame {
if ((self = [super initWithFrame:frame])) {
self.textColor = [UIColor whiteColor];
self.backgroundColor = [UIColor clearColor];
self.font = SMALL_CHALKDUSTER;
self.shadowColor = [UIColor colorWithRed:0.0f green:0.0f blue:0.0f alpha:0.35f];
self.shadowOffset = CGSizeMake (0, 2);
self.textAlignment = UITextAlignmentCenter;
return self;
- (void)dealloc {
[super dealloc];
@end
I then allocate a label like so...
ViewController.h
CustomLabel *myLabel;
@property (nonatomic, retain) CustomLabel *myLabel;
ViewController.m
myLabel = [[CustomLabel alloc] init];
myLabel.text = @"Blah blah blah";
I feel like Im way off on this... I must be since it isnt setting any of the properties Im trying to use in the subclass.
I found an older post on the forums here for setting the textAlignment but for some reason I couldnt apply the same logic to mine.
So can anyone help me with this subclass please and thank you?xnav... thanks a ton for pointing me to this link. Its got me closer to my end goal than I was before. Right now I have...
CustomLabel.h
#import <UIKit/UIKit.h>
@interface CustomLabel : UILabel {
@end
CustomLabel.m
#import "CustomLabel.h"
#import "Constants.h"
@implementation CustomLabel
- (void) drawRect:(CGRect)rect {
CGContextRef ctx = UIGraphicsGetCurrentContext();
UIColor *lineColor = [UIColor whiteColor];
UIColor *shColor = [UIColor colorWithRed:0.0f green:0.0f blue:0.0f alpha:0.35f];
//UIColor *bkgColor = [UIColor clearColor];
CGContextSetFillColorWithColor(ctx, lineColor.CGColor);
CGContextSetShadowWithColor(ctx, CGSizeMake(0, 2), self.font.pointSize / 2.0, shColor.CGColor);
//CGRect drawRect = CGRectMake(rect.origin.x, rect.origin.y,rect.size.width, rect.size.height);
//CGContextSetAlpha(ctx, 0) ;
//CGContextFillRect(ctx, drawRect);
//CGContextSetStrokeColorWithColor(ctx, [[UIColor clearColor] CGColor]);
//CGContextSetFillColorWithColor(ctx, [[UIColor clearColor] CGColor]);
CGContextSetBlendMode(ctx, kCGBlendModeClear);
//CGContextAddEllipseInRect(ctx,CGRectMake(size.width-(size.width/2)-(size.width/10), (size.width/10), (size.width/2), (size.height/2)));
//CGContextClosePath(ctx);
//CGContextDrawPath(ctx, kCGPathFillStroke);
//CGContextSetTextDrawingMode(ctx, kCGTextFillStroke);
//self.backgroundColor = [UIColor clearColor];
//[self setBackgroundColor:[UIColor clearColor]];
[self.text drawInRect:self.bounds withFont:TINY_CHALKDUSTER lineBreakMode:self.lineBreakMode alignment:UITextAlignmentCenter];
- (void)dealloc {
[super dealloc];
@end
As you can see I have a couple of things commented out. LOL I still cant figure out how to make the background color clear. I also dont know if I need the dealloc in this subclass. But the other properties seem to be working like the font and line color.
Thanks again for the link and getting me in the right direction xnav. If you can lend any more assistance on how to get that darn background color clear I would appreciate it! -
Help with Wireless thingy Please!!!
Hi, could someone please help with this? I am quite computer literate except when it comes to anything wireless or networking as it is something I've never used, so heres the problem - I bought ATV, and put a wireless card in the computer - do i need a seperate router to create a network? ATV searches for a network, and finds one, but I am not sure its mine!! ATV not coming up in itunes. Ive tried everything, but its just not happening. If I need a router, fine I'll get one, but if not could I have some instructions please?!!!! Like what on earth do I put in if adding network to atv manually? How do I know what my network name is? Tried with firewalls disabled, and added ports 3689 and 5353 to exceptions. Bearing in mind I need translations for things like DHCP etc! Its a Belkin Wireless G+ Network Card, compatible with ATV. Please help as this is the only thing standing between me and music heaven!!thankyou!
On a mac you could create an ad hoc network with a mac with wi-fi card only and internet sharing enabled, I've not done it and I don't know whether one has the choice to name the network or whether it will be identified as the mac's network name. I guess you will need advice from a PC guy as to whether this can be done on a PC, but my guess is that it can.
-
Help with mail installatioin please
could somebody please help with the installation of mail...I have had my mac for 7 months now, and can't use the mail application.
Somebody help please before I die?
thanks
n9milai don't understand...the whole outgoing thing!
my email address is in hotmail. k! I don't have a .mac account
explain this
"incoming Mail Server: The server where your mail waits for you to retrieve it. Also called a POP or IMAP server. Enter the address (name) of the mail server where your mail account resides, and where mail is stored. For example, mail.example.com."
and this
"Outgoing Mail Server: The server that sends your mail to its destination. Also known as an SMTP server. For example, smtp.example.com. To see the server in use by each mail account, choose Edit Server List from the Outgoing Mail Server pop-up menu."
sorry, I'm very slow to comprehending -
I would need help with saving some eamil messages to a disk to unclutter my email. How can I do this please?
Thanks.
ElisabethOpen the email and then from the File menu select Save As Rich Text Format. That'll save it to open in TextEdit. If you want a pdf then open the email and do command-p (Print) and then from the PDF drop down box lower left corner select Save as PDF.
-
This iMac will be the death of me! Help with Kernel panics please
Hi guys,
Had my 27" iMac back from repair at only 5 months old , they installed Lion OSX , first its been freezing on me for so reason at all, just surfing the net , no video or flash, now i keep getting a kernel panic for some reason , can anyone help with this please......
Interval Since Last Panic Report: 10 sec
Panics Since Last Report: 1
Anonymous UUID: 7B31CF0B-CED9-4C93-87BA-9E4D36669DCE
Sat Aug 13 19:47:12 2011
panic(cpu 0 caller 0xffffff80002c268d): Kernel trap at 0xffffff8000210d57, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000291, CR3: 0x000000001753f000, CR4: 0x0000000000000660
RAX: 0x0000000000000003, RBX: 0x0000000000000000, RCX: 0x000000000000db9b, RDX: 0xffffff80f148beb8
RSP: 0xffffff80f148be78, RBP: 0xffffff80f148bef0, RSI: 0xffffff80f148bec0, RDI: 0x0000000000000291
R8: 0x000000009b000000, R9: 0x000000009b000000, R10: 0x0000000000000003, R11: 0xffffff80d315d210
R12: 0xffffff80f148bec0, R13: 0xffffff80f148beb8, R14: 0xffffff8014c4c228, R15: 0xffffff8014c4c230
RFL: 0x0000000000010246, RIP: 0xffffff8000210d57, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x0000000000000291, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80f148bb30 : 0xffffff8000220702
0xffffff80f148bbb0 : 0xffffff80002c268d
0xffffff80f148bd50 : 0xffffff80002d7a3d
0xffffff80f148bd70 : 0xffffff8000210d57
0xffffff80f148bef0 : 0xffffff8000213374
0xffffff80f148bf20 : 0xffffff800021ba01
0xffffff80f148bf90 : 0xffffff800021bcd1
0xffffff80f148bfb0 : 0xffffff8000820057
BSD process name corresponding to current thread: WindowServer
Mac OS version:
11A511
Kernel version:
Darwin Kernel Version 11.0.0: Sat Jun 18 12:56:35 PDT 2011; root:xnu-1699.22.73~1/RELEASE_X86_64
Kernel UUID: 24CC17EB-30B0-3F6C-907F-1A9B2057AF78
System model name: iMac11,3 (Mac-F2238BAE)
System uptime in nanoseconds: 265853876036
last loaded kext at 24377516298: com.apple.filesystems.msdosfs 1.7 (addr 0xffffff7f81e83000, size 57344)
loaded kexts:
com.apple.filesystems.msdosfs 1.7
com.apple.driver.AppleHWSensor 1.9.4d0
com.apple.driver.AppleBluetoothMultitouch 66.3
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyDriver 2.1.1f11
com.apple.driver.AppleHDA 2.1.1f11
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.24
com.apple.kext.ATIFramebuffer 7.0.2
com.apple.ATIRadeonX3000 7.0.2
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AGPM 100.12.40
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.0
com.apple.driver.AirPort.Atheros21 430.14.9
com.apple.driver.AirPort.Atheros40 500.55.5
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0b2
com.apple.driver.AppleMuxControl 3.0.8
com.apple.driver.AppleLPC 1.5.1
com.apple.driver.AppleBacklight 170.1.9
com.apple.driver.AppleIRController 309
com.apple.driver.AppleUSBCardReader 3.0.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 32
com.apple.iokit.SCSITaskUserClient 3.0.0
com.apple.iokit.IOAHCIBlockStorage 2.0.0
com.apple.driver.AppleUSBHub 4.4.0
com.apple.driver.AppleFWOHCI 4.8.6
com.apple.iokit.AppleBCM5701Ethernet 3.0.6b9
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleAHCIPort 2.1.8
com.apple.driver.AppleUSBEHCI 4.4.0
com.apple.driver.AppleACPIButtons 1.4
com.apple.driver.AppleUSBUHCI 4.4.0
com.apple.driver.AppleRTC 1.4
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.4
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 166.0.0
com.apple.nke.applicationfirewall 3.0.30
com.apple.security.quarantine 1
com.apple.driver.AppleIntelCPUPowerManagement 166.0.0
com.apple.driver.AppleBluetoothHIDKeyboard 152.3
com.apple.driver.AppleHIDKeyboard 152.3
com.apple.driver.AppleMultitouchDriver 220.62
com.apple.driver.IOBluetoothHIDDriver 2.5f17
com.apple.kext.triggers 1.0
com.apple.driver.AppleHDAHardwareConfigDriver 2.1.1f11
com.apple.driver.DspFuncLib 2.1.1f11
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.kext.ATI5000Controller 7.0.2
com.apple.kext.ATISupport 7.0.2
com.apple.iokit.IOSurface 80.0
com.apple.iokit.IOBluetoothSerialManager 2.5f17
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOFireWireIP 2.2.3
com.apple.iokit.IOAVBFamily 1.0.0d22
com.apple.iokit.IOAudioFamily 1.8.3fc11
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 2.1.1f11
com.apple.iokit.IOHDAFamily 2.1.1f11
com.apple.iokit.IO80211Family 400.40
com.apple.driver.AppleSMC 3.1.1d2
com.apple.driver.IOPlatformPluginFamily 4.7.0b2
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleGraphicsControl 3.0.8
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.iokit.IONDRVSupport 2.3
com.apple.iokit.IOGraphicsFamily 2.3
com.apple.driver.AppleFileSystemDriver 13
com.apple.driver.BroadcomUSBBluetoothHCIController 2.5f17
com.apple.driver.AppleUSBBluetoothHCIController 2.5f17
com.apple.iokit.IOBluetoothFamily 2.5f17
com.apple.iokit.IOUSBHIDDriver 4.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.0.0
com.apple.iokit.IOUSBMassStorageClass 3.0.0
com.apple.driver.AppleUSBMergeNub 4.4.0
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.0.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.driver.XsanFilter 403
com.apple.iokit.IOAHCISerialATAPI 2.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.0.0
com.apple.iokit.IOFireWireFamily 4.4.3
com.apple.iokit.IOUSBUserClient 4.4.0
com.apple.iokit.IOEthernetAVBController 1.0.0d5
com.apple.iokit.IONetworkingFamily 2.0
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.0
com.apple.iokit.IOUSBFamily 4.4.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 165
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 326
com.apple.iokit.IOStorageFamily 1.7
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.4
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.4
Model: iMac11,3, BootROM IM112.0057.B00, 4 processors, Intel Core i7, 2.93 GHz, 8 GB, SMC 1.59f2
Graphics: ATI Radeon HD 5750, ATI Radeon HD 5750, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54313235533654465238432D48392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x0702, 0x32353636344D313333490000000000000000
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54313235533654465238432D48392020
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1333 MHz, 0x0702, 0x32353636344D313333490000000000000000
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.55.4-P2P
Bluetooth: Version 2.5.0f17, 2 service, 19 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: HL-DT-STDVDRW GA32N
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 4
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 5
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3Serious? Man , i have only just got it back! its had a new logic board fitted and also a new led display board and its only 5 months old!
I really don't want to take this back if its something simple, but if you guys think something is not right then i will.
issues are intermit freezing when just surfing the net ( hard reset needed )
And also now these intermit kernel panics for no reason, again just surfing the net. ( hard reset needed )
Apple are lucky i have a sense of humour!
Maybe you are looking for
-
DVD drive won't boot from Leopard or Tiger disks
Hi, I have had some issues booting from the OS install disks with my DVD drive, is it the drive or is it the software? Can this be fixed? Thanks Tom
-
I am using an iPad mini and iOS 7 will not install, I already have it downloaded
Question is in the title.
-
Airport Express not showing up on airport utility
I've connected Aiport Express for the forst time via an internet cable to my wireless router, and Have got the flashing amber light. Have I missed something, does anyone know/ Thanks Chris
-
Can we translate in captivate 7? I Have tried and changed the Caption and Notes. Can we change the on screen text of te normal slides, interactive call out boxes, screen recording slides and quizzes? If yes, please let me know the process.
-
Hi, Please help me, I get below error when I configure Workflow Configuration Assistant 2.6.4.0.0 - Linux Workflow Configuration Assistant 2.6.4.0.0 - Linux WFCA Version: : WorkflowCA.java 26.106 2005/06/29 04:33 WorkflowCA: WorkflowCA: Workflow Conf