Help with ethernet controller​?

Hi all! I recently formatted my HP Pavilion a1010y and reinstalled the OS. I went to go reinstall the drivers offered on the website, but it's lacking an ethernet controller driver! I can't seem to find it anywhere. I even managed to find out what kind of motherboard is in the computer but even then, no luck. The Hardware ID's on the controller are:
PCI\VEN_8086&DEV_27DC&SUBSYS_000C1331&REV_01
PCI\VEN_8086&DEV_27DC&SUBSYS_000C1331
PCI\VEN_8086&DEV_27DC&CC_02O0OO
PCI\VEN_8086&DEV_27DC&CC_02O0
Hard to read the font on the computer, Some look like O's and some look like 0's (Oh's and Zero's). Hope it's not too confusing! Please help! Thanks!
This question was solved.
View Solution.

For Windows XP
For Windows Vista
For Windows 7 (information only) drivers are "In the Box"
Please send KUDOS
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Similar Messages

  • Problems with Ethernet controller and PCI device driver on Satellite L30-10X

    Hellow!
    Sorry for my bad English, I'm from Russia.
    Just few days ago I bought Satellite L30-10X with W Vista on board. My opinion, that this OS does't very good on this computer, so I install W XP.
    I have some problems with drivers. At first, I dont know what model I have:PSL30 or PSL33? I download all drivers for both models. But, after installation, computer doen't find drivers for Ethernet controller and PCI device...

    Hi
    Satellite L30-10X belongs to the PSL33E series. This number can be found on the label placed on the bottom of the unit!
    You have to choose this number from the driver download form to get the compatible XP drivers.
    I dont know why you are not able to install the LAN driver. Ive got the same notebook with Vista and Ive installed the XP and all drivers run fine.
    I assume you have installed the drivers in wrong order. Please take the look in the Toshiba installation instruction txt file. In this order you have to install the driver! Its important.
    I think you should install the XP again to ensure the clean registry and then download and install the compatible XP drivers like mentioned in the installation instruction file.
    Good luck

  • Help with ethernet problems

    Can anyone help with this?
    Have a black powerbook, snow leopard, safari. No problems at all with wireless/ethernet at home
    When at work, usually just unplug ethernet from work PC and once plugged into mac, it automatically detects internet connection just like that
    For some reason, tonight, when I try this have no connection (an exclamation mark over the airport icon) and when I go into network in sys pref, says "self assigned ip address"
    If I switch to DHCP manually, can input ip address from PC and it works fine but whenever i try and switch to automatic, it wont work
    Have spent ages looking through the internet to try and find answer - firewall is off, no recent changes to software/hardware, flushed ipfw, etc
    Any bright ideas?
    Thanks a lot

    I am a bit confused by your post. Are you trying to connect to your network wirelessly using the AirPort card, or are you trying to use a wired connection via your Ethernet port?
    What is the source of your Internet connection? DSL? Cable modem? Something else?
    Are you connected to a router? What make and model?
    Best of luck.

  • Help with Ethernet broadband please

    Forgive me for asking what are probably simple questions - but I am having trouble with Ethernet broadband and I cant find answers anywhere ( including from my ISP ) . Thanks in advance for any help here !
    I have a blue and white 700 MHZ g3 imac running OSX 10.2.8 and OS 9.2 . I recently had Ethernet broadband hooked up - it connects to the net for a couple minutes , then wont receive for hours, then works for an hour, then not, etc. The ISP says that the D-Link router they installed is getting a continously strong signal - that they cant see anything wrong from thier end . The guys who installed the receiver thing-ey on the outside of my house also configured the Ethernet setup . Should I re-set up all that ? What do I need to know from the ISP to do that ? Do I have to boot up in OS9 and set up the Ethernet there also ?
    I dont have an Airport card but that shoul;dnt matter right ? I only have the one computer .

    Please post in the CRT iMac discussions. Thank you.

  • Need some help with a controller module

    i have a controller module with a model # of CA1009. i've been trying to track down a configuration manual online but haven't had any luck. what i'm trying to determine is whether or not this particular model supports a fiber connection.
    here are some other specs:
    part #: 603-6332
    number above part #: KC62706LS9UA
    thanks for the help!

    Not sure what you're looking for here; supports a fibre connection? The 603-4406 CA1009 is the Apple Xserve RAID Controller Module, a component of the [Xserve RAID|http://manuals.info.apple.com/en/xserveraid_userguide.pdf]; it's the drive-facing part of the "whole show" within the SAN controller, and not part of the side "facing" the FC SAN.

  • Help with wireless controller and VLANs

    Hi I'm trying to setup a wireless controller in preparation for a large site go live later this year. I'm struggling to get the controller and the WLAN using the correct VLAN. I want the controller on VLAN 100 and the clients on the WLAN on VLAN 200.                 
    My thought is that I would need a config similar to:
    Switchport for wireless controller management port set to trunk VLAN 100 and 200 with no native VLAN set.
    The management interface on the controller set to VLAN 100.
    A dynamic interface created on VLAN 200.
    When setup like this I can get to the controller on its management address but only from VLAN100 not from another VLAN on site or from other sites over the WAN.
    I have setup a WLAN which is set to use the dynamic interface on VLAN 200.
    I have set the AP to use HREAP and set the native VLAN as 200 and added the dynamic interface into the VLAN mappings
    When I connecting a client to the WLAN I get an address on VLAN 100.
    The switchport for the AP is set to native VLAN 100 and trunk 200 – this setup works for standalone APs at other sites.
    What am I missing?
    Also any idea why the management interface address is not routing? The netmask and gateway are set correctly.
    Thanks
    Paul

    Just to add to Steve's post... You only need to create a dynamic interface for vlan 200 if you have ap's also in local mode.  If your ap's are in H-REAP/FlexConnect mode, you don't need a dynamic interface for vlan 200.
    In you H-REAP/FlexConnect ap, you would set the wlan to vlan mapping there and the switchport configuration would be a trunk allowing vlan 100 (im assuming your native vlan for your ap) and vlan 200.  You should see something like the following:
    Thanks,
    Scott
    Help out other by using the rating system and marking answered questions as "Answered"

  • Help with Ethernet connection

    My daughter has upgraded to a G4 Powerbook, so I've got her previous laptop, an iBook G3 dual USB. I'm basically a PC user, so am new to Apple and OSX. I've been trying to connect to my DSL service, have created a New Location in Network settings, selected Built-in Ethernet, and Using DCHP. When I Apply Now, a new window opens and it's trying to dial an old ISP with the internal modem. I have gone through the process many times. Any suggestions as to fixing this will be greatly appreciated!
    Thanks,
    Steve Hunter
    Sherwood, Oregon
    iBook G3 dual USB   Mac OS X (10.1.x)  

    hi steve--
    i would delete the old location, as well as making sure that no other ports are enabled except for "built-in-ethernet" in the network settings. [ 8 ) ]

  • Need help with Audio controller or cue points

    Haven't set up the actual project yet. Just trying to
    determine best method. Will be using Flash Pro 8.
    Goal: create an initial page showing a TOC that represents
    chapters in an hour long audio piece. Clicking a topic brings them
    to a certain point in the audio. Once leaving the TOC, the user
    will see a still PPT jpg associated with that section of audio. But
    they'll also need access to an audio controller so they can scrub
    to different portions of the audio. Once they let up, the PPT image
    needs to change -- if they went to a different section.
    So at first I thought about a regular flash set-up with the
    audio spanned throughout the timeline, PPT images set-up throughout
    the timeline, and frame labels to jump to. But I couldn't figure
    out how to set up an audio controller with this set-up.
    Then I thought about a Flash Slide Presentation set-up using
    a Media Playback component with the Media Controller component and
    cue points. I've looked at some of the on-line examples of this and
    they seem to work when playing forward but I notice that when you
    scrub backwards that the images fall out of synch. It seems if you
    have cues A, B and C and if you begin dragging from the C cue and
    let up BEFORE the B cue the image displays B. It should be
    displaying A though since your somewhere in-between A and B. But A
    doesn't show unless you scrub back far enough to cross the A cue
    time.
    So what is the best method. It seems the latter if there was
    only a way to calculate the time between the two cues. For instance
    "if time is >A but <B then display A".
    But the first example with the long timeline and frame labels
    would be fine if there was a nice controller out there that I could
    implement.
    And remember I need to be able to jump to any spot in the
    audio clip from the TOC menu on the first screen.
    Thanks!

    Is it AVCHD, Mini-DV, or DVD?  What format does the camera record to?

  • Help with servlet controller

    lets say I wanted to build a login function. The function needs to
    1) validate the form
    2) check the database to see if the u/p matches
    3) return the user to the next step
    What is the most efficent way to do this.
    login.jsp -> package.FormValidate(servlet) ->check.jsp -> package.DBCheck(servlet) -> check.jsp -> succeed.jsp
    or should their be one controller servlet which is called by the jsp page. The controller servet then calls the package.FormValidate servlet then the controller servlet calles the package.DBCheck servlet) then then controller servet send to either fail.jsp or succeed.jsp
    Do you see what I mean? When I build a logical function ,should jsp call each servlet or should their be a main "controller" servlet?
    thanks

    Use Struts to solve all these issues and let struts do the work for you...

  • Tecra-S11 - Ethernet-Controller not installed (Win7)

    After setting up Window 7/64 (exactly Win2008 server R2 enterprise) newly I installed all 64-bit-Drivers. for the Ethernet-Controller (INTEL) it still says "...not installed". When executing the related driver (TC00248700A.exe) the extracting works but afterwards nothing happens....
    (Tecra-S11 13M)
    Can somebody help? No hits with ethernet-controller in the forum yet....

    I have checked Toshiba download page and Win7 64bit LAN driver for your Tecra must be THIS one.
    Test it please.

  • Hp pavilion 15-n203sx notebook pc ethernet controller‎ driver for win 7 64 bit

    Hi, kindly i  have issue with ethernet controller‎ it's not workintg att all when i removed the Wind 8 and install wind 7 64 bit ,  please if you have driver for this send it to me becouse i tried to install the driver for wind 8 in wind 7 but it's still not working . regrds .

    Hi, Please try:    http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_104622_1&swEnvOid=4063 Regards.

  • Help with Drivers for Ethernet Controller (on a T42)

    When I go to my Device Manager .. i see this category called 'Other Devices' .. under which I see:
    - ? Other Devices
          --? Ethernet Controller
    I can't seem to locate the right drivers for my T42.
    I was able to find my PNP Device ID for this and it says:
    PCI\VEN_168C&DEV_1014&SUBSYS_833117AB&REV_01\4&39A85202&0&10F0 
    Error Code: The drivers for this device are not installed
    Can someone point me in the right direction for this driver ?
    Thanks
    EB

    Your "other" Ethernet card is IBM (Atheros) a/b/g wireless card and here's the driver:
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67214
    After downloading it, make sure to unpack it from the following directory: C>Drivers>Win>Wlanath
    And while I'm at it, here's your Bluetooth driver:
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-50245
    C>Drivers>Win>BDMC
    Hope this helps. 
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • Ethernet Controller & Safely Remove Hardware With Windows 7 On X200

    Hi,
    I'm having a weird issue with Windows 7 on my X200. For some reason, my ethernet controller is being displayed in my system tray under "Safely Remove Hardware". Is anyone else having this problem? If you are not having this problem, would you mind checking what driver you are using so that I can try it as well?
    I have the "Intel 11b/g Wireless LAN Mini PCI Express Adapter III" and I'm using the driver that was installed automatically from Windows 7 I presume. Its seems like the only option though...
    Thanks. Any help would be greatly appreciated.

    renzovidalon wrote:
    But, I would like to know if this is normal behavior.  
    Its not normal behavior on my X200 running Win 7 Ultimate x64.
    Cheers,
    Bill
    I don't work for Lenovo

  • Dv6809wm nvidia Ethernet Controller driver help me please.

    My notebook is a dv6809wm. I am Korean, but also the This is South Korea.
    After installing Windows 7, nvidia Ethernet Controller, driver can not find.
    Windows xp, Vista, 7, installed it several times, nvidia Ethernet Controller driver can not find. Chipset nvidia 630a, installing, and even install sp37730, the Internet should not.
    What should I do? You help me please.

    This used to be a sticky post but should have your answers. Install the AMD chipset driver for the dv65zz and higher AMD models. This is a Vista driver and may have to be run in compatibility mode but will provide ethernet functionality:
    http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/Windows-7-Upgrade-Guide-for-dv6...
    It is a long post but the AMD chipset driver is near the top. I see you already tried SP37730 and it is not working for you so you may have to do a manual install by pointing the driver installer to the subfolder where sp37730 unzips, containing the ethernet and make it take the ethernet driver .inf file. 
    You may also want to try one of these drivers:
    http://www.win-raid.com/t15f37-NVIDIA-Optimized-nForce-Driverpacks-for-Vista-Win.html
    Use the ones labelled:    3. "Special MCP65-67 nForce Driverpacks for Vista/Win7"
    Post back if you need more help with this. 

  • Need help with actionscript for media controller

    I seem to be having a slight problem. I've been looking
    around and everything I see is for .flv playback. Anyways, here's
    my problem.
    Client wants a video that's interactive. When a transition
    occurs a simple tex button shows up which links to certain web
    pages. Deploying this as a .swf would be no problem, but they want
    a controlbar with it so a user can scrub back and forth in the
    video. So the best way to do this would be progressive or
    streaming.
    I created a source file that utilizes the "loader component"
    and inserted the "media controller component". I'm not very good
    when it comes to actionscript and can't seem to find the proper
    script which utilizes the media controller so the user can scrub
    back and forth. Everything else seems to work fine with the loader
    as it loads an external .swf file.
    Just need to get the controller working properly. Total
    frames of the swf is a little over 3,000 and dividing the total
    frames by 30 was 107.7 seconds. So I round that to 108 seconds. The
    online docs seem to be fragmented and not always consistant
    especially when i'm not using the flvplayback or display.
    Does anybody know the actionscript for this? Or where I can
    find the information on this? I've associated the loader with the
    controller and vice versa in the behaviors panel as well if that's
    any help. Any help is much appreciated thanks.

    Look, I hope you don't have false expectation that by knowing one piece of AS capabilities you will be able to accomplish your task.
    If I say that the code for placing one MovieClip into another is:
    clip1.addChild(clip2);
    will it make any difference in terms of implementation?
    Also, you say "select." This may mean a lot of thing: click, drag and drop, mouse down, etc. I am saying that implementation tightly depends of definitions that you give.
    I don't know the extend of your AS skills, so it is not easy to figure where to start helping. Also, forum, perhaps, is not the medium where someone will write a lot of code for you. It is good for getting answers to very specific questions and solutions. This is when you have some code in place already.
    What I would suggest is to start developing a very rough concept - no video, no birds, no numbers - just a static background image of the person you have in your first post. If you advance to an application that will allow user to select a square, place the square into another one - it will be a good start.

Maybe you are looking for