Help with Exporting Edited Version of Picture

With iPhoto I an trying to edit (crop and adjust the color) of photographs. I have tried exporting the photo, but the cropping does not come over. Color changes come fine, but no cropping.
HELP?!?!?
Thanks.
B2

Cropping takes a few steps. Click Crop, choose a constrain ratio if you want, adjust the crop box to where you want it. Finally, click Crop again to perform the crop. When you click Done or select another photo you should get the message "Saving Changes" (or something to that effect) to let you know it worked.
Are you doing all of these steps?

Similar Messages

  • IPhoto 9.5.1 will not export edited versions of my photos.

    I cannot export edited versions of my photos (specifically cropped photos) in iPhoto 9.5.1 using Mavericks. This is driving me nuts. I've tried duplicating the photos, saving them in different formats . . . no dice. This is very annoying. Without photo editing, iPhoto is pretty useless.

    You can use 3rd party editors from within iPhoto.  Here are some of those:
    Some Image Editors That Support layers:
    Photoshop Elements 11 for Mac - $79
    Rainbow Painter - $30
    Imagerie - $38
    Acorn - $50
    Pixelmator - $60 
    Seashore - Free
    GIMP for Mac - Free
    Xee 2.1 - free
    I would suggest you try one of the free ones and make sure that iiPhoto will export the edited version before you purchase an editor.  The following is for Photoshop Elements but would be applicable to most of the editors listed above, particularly the part about keeping the file extension as jpeg and not one created by the editor.
    Using Photoshop Elements or Photoshop as Your Editor of Choice in iPhoto.
    1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
    2 - double click on the thumbnail in iPhoto to open it in Photoshop.  When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done. 
    3 - however, if you get the navigation window
    that indicates that  PS wants to save it as a PS formatted file.  You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    NOTE: With Photoshop Elements  the Saving File preferences should be configured as shown:
    I also suggest the Maximize PSD File Compatabilty be set to Always.  In PSE’s General preference pane set the Color Picker to Apple as shown:
    Note 1: screenshots are from PSE 10
    Note:  to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.

  • I need help with Cool Edit 2000

    I need help with Cool Edit 2000. Can someone help me?

    Message edited by moderator: maybe don't publicly post your serial?
    Quite! Never a good idea, even with really old software...
    jackm36094786 wrote:
    Steve: What I have is a Serial # (?) xxx ID # 105368761 and a case # 3009176.I also have the program on my Gateway computer but I don't know how to use it.  Is this of any assistance?
    The program software should install fine (others report using it successfully) but the difficulty has always been registering it. To do this you need to find a program (that often people discard, unfortunately) called ce2kreg.exe and run that. That's where you enter your registration details, and how you get rid of all the noises that CE2000 will put all over your audio otherwise (unless you severely restrict the facilities you can use).
    It used to be the case that if you'd lost the registration program but had the serial numbers, that Adobe would send you a copy of ce2kreg.exe, but somehow I doubt that they'd be willing to do this any more - it was a long time ago now, after all.

  • Help with exporting Deski to text file via Web Intelligence

    We are currently converting from BO version 5 to BO XI rev2. I have a report that must be scheduled to a flie in plain text format. I am using a deski report. When I save as to text, the file is fine. When I schedule it in webi, the file seems to be missing the end of line character for each row in the table, so it cannot be used for an import to another program. Can anybody help with this?-

    well, in that case you need to determine if this issue only happens with a perticular report or all of them, if it happens only with reports imported from 5.x or with newly created reports as well.
    Looks like it is happening only when report is exported from Infoview, not in the Deski client. This might indicate a problem at the Web Apllication server (tomcat or one you use).
    If this issue is happening with any report - it might be a bug. In that case you have no options as there are no more patches for XIR2.
    On the other hand - if all you need is to extract data for consumption in another tool , why not use Data integrator instead ?
    Also, if this desn't work in Deski - does it work if you convert your reports to webi and export from those ?

  • Help with multiclip editing in FCP

    Can someone please help me with multiclip editing. I have followed all the steps in the tutorials I have watched but I am unalble to switch between the two angles in the time line. Also the red line in the time line is telling me to render everything first . Is that normal or is it because I am using the 5.0 version of FCP?

    To switch between angles, the timeline should not be rendered. Once you render it, it may play more smoothly, but you can't switch.
    Also, sometimes you may have trouble switching many HD files, so it might work better to use Media Manager to make lower resolution proxies for your editing, then bringing the full-res files back for your final output. If the computer can't handle the load, it may refuse to do multiclip editing.
    Finally, you may need to switch Playhead Sync back to "Open" from time to time. For some reason, the Viewer sometimes switches to "Sync Off".
    By the way, your question actually belongs on the Final Cut Studio forum:
    https://discussions.apple.com/community/professional_applications/final_cut_stud io

  • Need help with Export workflow.

    Hello again.
    Today I was experimenting with exporting a project using Export QT Movie and QT Conversion.
    My goal is to show a QT project on the web, either 640x480 or 320xx240, depending on how monstrous the file size is.
    My initial impression was that export QT Movie simply generates (I'm guessing) a full size rendering of the project. It's icon is a FC icon. What I did then was an "Open with..." quicktime(pro). This is where I get confused: I know that the next steps are for for preparing the project for sizes, compressions and so on. The export to QT movie seems to be a longer route to get to the settings that you need to use in QT Conversion, which after selecting QT conversion, you have the Format, Use, and Options settings.
    Am I right so far?
    Some background about my project- Easy setup= DV-NTSC. If I look in my browser, my clips are 720x480, 29.97fps, Compressor(?)DV/DVCPRO-NTSC, pixel aspect ratio, NTSC-CCIR 601 and anamorphic is checked.
    I also have still photos motion control stuff, PS tiffs, that do not have anamorphic checked.
    Form here on is where I get confused.
    Under settings, I am selecting DV/dvc-NTSC for compression frame rate 29.97, medium compressor, scan mode, interlaced, and aspect 4:3.
    The filters setting I don't use.
    The size setting I'm trying 320x240 with aspect ratio and de interlace video UNCHECKED.
    Is this a good workflow for the web. I notice on 640x480 my titles (livetype) seem kind of jagged.
    Any help preparing a project for the web would be appreciated. If you need more info let me know.
    Thanks so much.
    Jonathan

    Thanks for the additional comments and ideas.
    In terms of profile, as I mentioned, the intermediates will be going off to the editor (off-site) for editing on his FCP suite.  I'll stick to working in the prescribed HDTV (Rec. 709) space, and I've given him all the detail I can of how I'm working, but crucially I haven't stood at his edit-suite to see how the stuff looks.
    But, he's no newbie, so I'm hoping it'll be OK.
    Blasted shame about the H.264 BluRay not being compatible with QT - I thought I had this whole issue beat until that came along.  It's not a matter of disk space here, but the editor is mithering that the intermediates we are testing, in either PNG, or Animation, and a couple of others, are choking his playback.
    I'm not sure what to say about that, other than to go down this road of trying to squish these intermediates as low as possible without wrecking the look, hence finding that the DNxHD is providing the best solution.  If it had been a SD project, I might well have tried the native H.264, even over our normal PNG workflow.
    So what will play the native H.264 BluRay compressed output?
    Julian.

  • Please help with export issue with HD.

    I have a current project set at 1920x1080 HDTV 1080i (16x9) and my customer has decided to change his mind and not go HD 16x9 which I had shot in specifically for this reason. What settings could I use to export for 720x480 DVD 4:3? Please help.
    Thanks
    Joe

    +Do I copy and past the Sequence file from the HD into a DV NTSC new project? Yes or no?+
    Yes. Once you are done export it to Compressor to encode your video into an m2v and the audio into an ac3 dolby stereo. Then import those as assets in DVDstudio4, create your menu, if you need one and burn your DVD.
    +Can you give me a more step by step?+
    As I asked before...are you not familiar with using Compressor and/or DVD Studio Pro?
    If not (and if the links I sent to you are not helpful enough) then follow these two approaches:
    (Hope Shane Ross doesn't mind if I report one of his stock answers about a basic way to make a DVD followed by my basic "step by step" use of Compressor in order to give the OP a quick and easy support).
    Shane Ross wrote:
    +The absolute simplest way to make a DVD using FCP and DVDSP is as follows:+
    +1. Export a QT movie, either a reference file or self contained using current settings.+
    +2. Open DVDSP, select the "graphical" tab and you will see two little monitors, one blue, one green.+
    +3. Select the left blue one and hit delete.+
    +4. Now, select the green one, right click on it amd select the top option "first play".+
    +5. Now drag your QT from the broswer and drop it on top of the green monitor.+
    +6. Now, for a DVD from an HD source, look to the right side and select the "general tab" in the track editor, and see the Display Mode, and select "16:9 pan-scan."+
    +7. Hit the little black and yellow burn icon at the top of the page and put a a DVD in when prompted. DVDSP will encode and burn your new DVD.+
    +THATS ALL!!!+
    +NOW...if you want a GOOD LOOKING DVD, instead of taking your REF movie into DVD SP, instead take it into Compressor and choose the BEST QUALITY ENCODE (2 pass VBR) that matches your show timing. Then take THAT result into DVD SP and follow the rest of the steps. Except you can choose "16:9 LETTERBOX" instead of PAN & SCAN if you want to see the entire image.+
    Gogiangigo wrote:
    Creating your MPEG2 and AC3 files with Compressor:
    Compressor will create an Mpeg2 of your edited video and an ac3 (dolby stereo) for the audio (You can't create ac3audio with DVDstudio).
    (Use google for any farther information about any word or definition that remains slightly unclear to you).
    After that is done burning your DVD with DVDStudio will be quicker and easier.
    Step 1
    Once you are done with the edit you can:
    either export it straight from the timeline to Compressor (File>Export>Using Compressor)
    or create a QT movie (check self-contained in the export window) and import into Compressor after you open it.
    If you export it straight from the timeline Compressor will open automatically,
    if you wish to use the self-contained QT movie you can still export it from an open FCP project or open Compressor independently. If the the latter is your case once you open Compressor click on Add File in the toolbar (top left corner ).
    In both cases your video will appear in an untitled project right below the toolbar. You can see the movie (or FCP) icon and the title of your project.
    Now, the simplest way to proceed is as follow:
    you see the text next to the icon of your movie (in the blue rectangle) saying "drag here settings and destinations"? Now go to the settings window below, you can see the settings and destinations tabs. Go to Settings>Apple 4 groups>DVD 10 groups>DVD best quality 90 minutes two settings. This is the most common setting to use.
    In a nutshell drag the DVD best quality 90 minutes folder over the "drag settings and destinations here" text. Choose your destination. If you click each setting the inspector window activates. Now before we go ahead I suggest you to read the manual and understand the importance of the inspector window and its functions. In particular read about Avarege bit rate, maximum bit rate and in general Variable frame rate (VBR) and constant frame rate. With regard to audio read about ac3.
    This time we leave default settings and proceed by clicking the Submit button.
    In the preview window, right below the player commands you can see a little arrow and a date, click on the arrow and you can see that Compressor is encoding your video.
    Step 2
    When the encoding process is over open DVDstudio.
    See the first button of the toolbar , top left? Click on Import Asset, find your encoded audio and video files and open them.
    Now since your movie has been already compressed video(Mpeg2) and audio (ac3) they will show in the assets tab below the graphical tab followed by two green lights.
    From now follow Shane Ross's steps from point 3 if you don't want a menu.
    If you need a menu there's a simple video tutorial that came with FCP studio 2 discs . Take a look at that.
    Best,
    G.

  • I need help with the upgraded version of Garage Band '11.  Its totally different.

    I am incredibly frustrated with the newest version of Garage Band.  I am a choreographer and constantly need to edit music.  The work I do is very simple.  Just cutting sections of music to make the songs shorter.  I have been using Garage Band for years with total ease.  I used to be able to just highlight a section of music and click delete.  Now all that does is either stretch out all the timing or delete the whole track.  I need simple cut edits.  PLEASE HELP!!!  The help sections do not help at all!

    emmiesuz04 wrote:
    On the bottom window
    editor pane
    emmiesuz04 wrote:
    I'd click where I'd wat to cut, drag to the right and highlight the section I didnt want
    click in the bottom half
    emmiesuz04 wrote:
    Then drag the next part of the song to the left
    click in the top half

  • Help with exporting and image size or boundaries?

    I am trying to slide the cat into the scene a little at a time foir an animation project I am working on. However, when I export the image the back ground of the image expands with a checkered back ground( showing here in white) and shows the whole cat.
    How do I just show a little of the cat on the image at a time when exporting. I am trying to give the impression that the cat is walking into the room. I do not want to have to cut the cat up.
    I would be thankful for any suggestions.

    Provide the name of the program you are using so a Moderator may move this message to the correct program forum
    This Cloud forum is not about help with program problems... a program would be Photoshop or Lighroom or Muse or ???

  • Help with exporting images

    HI
    I have recently shot a wedding with two bodies.  Forgot to sync the bodies before hand and so left with images at massively different times.  in lightroom i then changed to view by capture time and amended all the wrongly timed images.  i am then left with all images in order and looking as i want.  I then put them in a catalogue and a collection to be on the safe side and exported both.  Whatever i do i see the exported images in my pictures in the same order they were in before i changed the capture time.  i have tried to research this until im sick of it.  I just cant figure out what is going wrong.  Just tried to save to dvd instead and saved but again in the order pre correction?  please help

    Hi did that this morning .  I'm viewing in the exported named file in a
    folder on the mac ... I've tried re naming , sort by capture time but the
    minute I export , the exported file looks just the same as before I made
    the capute time amendments .
    Thanks
    Kim

  • Need help with installing old version of firmware

    I would like to revert to an old version of firmware for my Airport Extreme base station. I have read in a number of postings that this would possibly help with the problem of my Canon Pixma ip3000 not working after the firmware was usdated. When I tried to install the old firmware, the Installer would not allow it, there was just a message that the software was up to date. Could anyone please give a step by step description of how this can be done? Is there a way around the Installer? Thanks.

    The firmware supplied with the base station was 4.1. After installing it, everything worked just fine, including wireless printing to a Canon Pixma ip3000. At one point, after being prompted by a message onscreen to upgrade to 4.2, I did the download and installation, and that is when all the problems started. No wireless printing, and I can't seem to use the Airport Admin or Assistant (not responding). Since then I have also upgraded the OS to 10.4.5.
    I am trying to downgrade to 4.1 since that is what worked initially and what was suggested in another posting I read.
    I did look at the information for the various parts of Airport and noticed that the Setup Asistant is 4.2, the Admin Utility is 4.2 and the base station is 5.5.1. Could this be affecting the problem as well?
    I will try downgrading using the link you provided. Thanks very much.

  • Help with downloading new version of flash player not accepting password

    I am having trouble downloading the new flash player version.  Adobe is not excepting my password even with changing it several times.  Need help with downloading the new version.

    It's NOT an Adobe password. It's your Operating System (admin) password.
    Download the Adobe Flash Player installer directly by clicking one of the following links.
    Flash Player for ActiveX (Internet Explorer)
    Flash Player Plug-in (All other browsers)
    Flash Player (Mac OS X)

  • Help with export with query option

    I need help with an export with query option.
    I have a script that includes the following
    auddate=`date '+20%y%m%d'`
    file="cal_shrlgpa"$auddate".dmp"
    exp / file=$file tables=shrlgpa query\=" where shrlgpa_pidm in (Select sztahbr_pidm from purdue.sztahbr where sztahbr_to_extract\=\'Y\' and sztahbr_export_status\=\'N\')\"
    echo 'cal export file created:'$file
    when I run the script, I get the following error:
    cal_export_tables.sh[7]: 0403-057 Syntax error at line 7 : `"' is not matched.
    Can somone help me with the query option?

    I made the suggested change:
    exp / file=$file tables=shrlgpa query=" where shrlgpa_pidm in (Select sztahbr_pidm from purdue.sztahbr where sztahbr_to_extract=\'Y\' and sztahbr_export_status=\'N\')"
    and got the following error:
    LRM-00116: syntax error at 'sztahbr_to_extra' following 'where'
    EXP-00019: failed to process parameters, type 'EXP HELP=Y' for help
    Shannon

  • Help with making part of a picture transparent

    I am very new to Indesign, and I am trying to teach myself how to use it. I was using Microsoft Publisher for my last project, in which I was able to use a transparency tool to click on part of a .gif image to make it transparent, whilst leaving the rest of the image intact.
    I am trying to place an image on top of a background image using Indesign. My image is a picture of a sun, surrounded with a white box. When I place the sun on top of the background colour, I still get the white box around the sun, and I can't find any way of eliminating the white box, whilst retaining the yellow sun image. I hope this makes sense!
    Can anyone help with his? I will need to do this quite a few times during the course of my project so any help would be greatly appreciated.
    Many thanks. Bev

    Jeremy bowmangraphics wrote:
    Eugene,
    Is it fair to make the sweeping statement that "GIF is not a print format"?
    I don't know how “fair” the statement is, but it’s balls accurate. GIFs are RGB, limited to 256 colours only, and have only one bit of transparency. The format is absolutely inappropriate for print.
    I can think of a few situations in which GIFs are useful for print as well as the web. For example, GIFs allow nonprofessionals to use logos with solid blocks of color, simple transparency, without color management concerns, and so on, both on the web and in almost all print applications that nonprofessionals use.
    Automatic transmissions and power steering make it possible for a recent driver’s license recipient to take the family station wagon around Laguna Seca. That doesn’t make him Emerson Fitipaldi or make the car a Formula-1 racer.
    Isn't it a cheap-and-cheerful, universal, perfectly OK format for print?
    No.
    It has limitations that are obvious to professionals, but it isn't always a mistake to use it in print.
    It sure is. Print does not mean “printed to my $60 inkjet.” Print means “printed on a digital colour printer or on a press.” In that context, GIF’s only use is as a source for later conversion to a superior format. Even if printing to a POS inket, conversion to PSD, TIF, Illustrator, PDF, or even PNG would put the image into a superior format that is more suitable for print.
    GIF is not suitable for print. Period.

  • Help with Work Template  Version 1.1 purchased at Apple Store

    Need help with an app i purchased from the apple store called Work Templates Version 1.1. I downloaded it but when I tried to open the file, it tells me that file cannot be opened through Brain games ( a game I have installed a long time ago)  does anyone know why this is happening?  I keep tabbing on the Work Template icon but the Brain game icon come up and it give me that same message.  Hope someone out there can help. 

    Dah.veed,
    thank you so very much for responding.  Of course I don't have MS Word (laughing out loud)!  I will try installing.  I hope it's not too expensive.  Again, thank you and may God bless you.
    Itzy169

Maybe you are looking for