Help with exporting images

HI
I have recently shot a wedding with two bodies. Forgot to sync the bodies before hand and so left with images at massively different times. in lightroom i then changed to view by capture time and amended all the wrongly timed images. i am then left with all images in order and looking as i want. I then put them in a catalogue and a collection to be on the safe side and exported both. Whatever i do i see the exported images in my pictures in the same order they were in before i changed the capture time. i have tried to research this until im sick of it. I just cant figure out what is going wrong. Just tried to save to dvd instead and saved but again in the order pre correction? please help

Hi did that this morning . I'm viewing in the exported named file in a
folder on the mac ... I've tried re naming , sort by capture time but the
minute I export , the exported file looks just the same as before I made
the capute time amendments .
Thanks
Kim

Similar Messages

Help with exporting and image size or boundaries?

I am trying to slide the cat into the scene a little at a time foir an animation project I am working on. However, when I export the image the back ground of the image expands with a checkered back ground( showing here in white) and shows the whole cat.
How do I just show a little of the cat on the image at a time when exporting. I am trying to give the impression that the cat is walking into the room. I do not want to have to cut the cat up.
I would be thankful for any suggestions.

Provide the name of the program you are using so a Moderator may move this message to the correct program forum
This Cloud forum is not about help with program problems... a program would be Photoshop or Lighroom or Muse or ???

Critical issue with exporting images in iPhoto 08?

I have been exporting selected photos to a thumb drive under iPhoto 06. I then take the thumb drive and put it in a pioneer palsma and go to GALLERY mode. Works fantastic and I can then review the images with my clients. Never had a problem with iPhoto 06. I upgraded to iPhoto 08 recently and export selected photos to the thumbdrive under the new upgrade. When I go to Gallery mode on the plasma the photos do not come up and it hangs up the plasma..... ??? Seems to be a problem somewhere with what "08" does with the photos? I ran a number of different test with two different thumb drives using photos from iPhoto 08 and cannot get them to work. I go back to an old iMac that was not upgraded to iPhoto 08 and both thumb drives they work fine on the plasma. In fact it is almost impossible to mess the operation up with "06". I have tried to export the photos in "08" in all the various size options and still no success. I would appreciate any help to this critical problem I am facing since I use this function of showing my images on a plasma on a daily basis . After about 10 to 12 hours of working htis problem I am totally loss as what to do. Thanks for your time.

Thanks for your reply.
1. I select the photos from iPhoto - varied between 5 and 20 (ran different test)
2. Click on FILE
3. Select EXPORT
4. Under the FILE EXPORT tab I have tried all the various options with no success
5. KIND - I make sure they are JPEG files - I have tried the Original also which is actually JPEG files
6. JPEG QUALITY - I have tried all 4 options from LOW to MAX
7. SIZE - I tried all 4 size options from SMALL to FULL
8. FILE NAME - I use filename
9. Select EXPORT tab
10. I export to the thumbdrive and I chcek and they are on the thumbdrive
11. I also tried to EXPORT to the desktop and copy them to the thumbdrive
I click on the photos on the exported images I placed on the thumb drive and they come up fine on PREVIEW on my MAC. No prroblem with the images until I try to use them on the plasma. I go back and use images from iPhoto 06 that I did not call up with the "08" program and they work fine.
Hope that explains what I do. Thanks again

Help with adding image onclick

Hey everyone,
I am making a simple game in AS3 and need help with adding an image once they have click on something.
On the left of the screen are sentences and on the right an image of a form. When they click each sentence on the left, writing appears on the form. Its very simple. With this said, what I would like to do is once the user click one of the sentences on the left, I would like a checkmark image to appear over the sentence so they know they have already clicked on it.
How would I go about adding this to my code?
var fields:Array = new Array();
one_btn.addEventListener(MouseEvent.CLICK, onClick1a);
one_btn.buttonMode = true;
function onClick1a(event:MouseEvent):void
    fields.push(new one_form());
    fields[fields.length-1].x = 141;
    fields[fields.length-1].y = -85;
    this.addChild(fields[fields.length-1]);
    one_btn.removeEventListener(MouseEvent.CLICK, onClick1a);
    one_btn.buttonMode = false;
    //gotoAndStop("one")
two_btn.addEventListener(MouseEvent.CLICK, onClick2a);
two_btn.buttonMode = true;
function onClick2a(event:MouseEvent):void
    fields.push(new two_form());
    fields[fields.length-1].x = 343.25;
    fields[fields.length-1].y = -85;
    this.addChild(fields[fields.length-1]);
    two_btn.removeEventListener(MouseEvent.CLICK, onClick2a);
    two_btn.buttonMode = false;
    //gotoAndStop("two")

I don't know where you're positioning the button that should enable/disable the checkbox but for "one_btn" let's just say it's at position: x=100, y=200. Say you'd want the checkbox to be to the left of it, so the checkbox would be displayed at: x=50, y=200. Also say you have a checkbox graphic in your library, exported for actionscript with the name "CheckBoxGraphic".
Using your code with some sprinkles:
// I'd turn this into a sprite but we'll use the default, MovieClip
var _checkBox:MovieClip = new CheckBoxGraphic();
// add to display list but hide
_checkBox.visible = false;
// just for optimization
_checkBox.mouseEnabled = false;
_checkBox.cacheAsBitmap = true;
// adding it early so make sure the forms loaded don't overlap the
// checkbox or it will cover it, otherwise swapping of depths is needed
addChild(_checkBox);
// I'll use a flag (a reference for this) to know what button is currently pushed
var _currentButton:Object;
one_btn.addEventListener(MouseEvent.CLICK, onClick1a);
one_btn.buttonMode = true;
function onClick1a(event:MouseEvent):void
     // Check if this button is currently the pressed button
     if (_currentButton == one_btn)
          // disable checkbox, remove form
          _checkBox.visible = false;
          // form should be last added to fields array, remove
          removeChild(fields[fields.length - 1]);
          fields.pop();
          // clear any reference to this button
          _currentButton = null;
     else
          // enable checkbox
          _checkBox.visible = true;
          _checkBox.x = 50;
          _checkBox.y = 200;
          // add form
          fields.push(new one_form());
          fields[fields.length-1].x = 141;
          fields[fields.length-1].y = -85;
          this.addChild(fields[fields.length-1]);
          // save this button as last clicked
          _currentButton = one_btn;
     // not sure what this is
    //gotoAndStop("one")
I'd also centralize all the click handlers into a single handler and use the buttons name to branch on what to do, but that's a different discussion. Just see if this makes sense to you.
The jist is a graphic of a checkbox that is a MovieClip symbol in your library exported to actionscript with the class name CheckBoxGraphic() is created and added to the display list.
I made a variable that points itself to the last clicked button, when the "on" state is desired. If I detect the last clicked button was this button, I remove the form I added and the checkbox. If the last clicked button is not this button, I enable and position the checkbox as well as add the form.
What is left to do is handle the sitation where multiple buttons are on the screen. When a new button is pushed it should remove anything the previous button added. This code simply demonstrates clicking the same button multiple times to toggle it "on and off".

Lightroom 5.3 bug with export images

Hi,
I can't export single images in Lightroom anymore. When I choose an image including the watermark the system exports all the latest imported images, but not a single one. Can anyone help me with that?
-jo

in your lr5.2, click help>updates...
bug fixes:
Issues when upgrading catalog from previous versions of Lightroom.
Incorrect photos are displayed after switching away from a Publish Collection.
Catalog optimization did not finish, and was not optimizing the catalog
Feather of clone spots is set to 0 after upgrading catalog to Lightroom 5.
Auto White Balance settings are not saved to Snapshots.
Sony 18-55mm lens is detected as the Hasselblad 18-55mm lens for lens correction.
Increased Update Spot Removal history steps when in Before and After view.
Slideshows start playing automatically even when the Manual Slideshow option is enabled.
Video playback stops when dragging on the scrubber.
Errors when publishing photos to Flickr through the Publish Service.
Option + drag on Edit Pin behavior is functioning incorrectly.
Black border appears around the exported slideshow video.
Catalog containing images processed with PV2003 were adding a post-crop vignette when catalog upgraded to Lightroom 5.
Pressing the “Reset” button while holding down the Shift key caused Lightroom to exit abruptly.
Output Sharpening and Noise Reduction were not applied to exported images that were resized to less than 1/3 of the original image size.
The Esc key did not exit the slideshow after right clicking screen with mouse during slideshow playing.
Import dialog remained blank for folders that contain PNG files with XMP sidecars.
Metadata panel displayed incorrect information after modifying published photo. Please note that this only occurred when metadata was changed after the photo was published.

Help with swap images using rollovers

I have a website created using DW CS5. Recently purchased FW CS5 to help with web graphics and design. I am trying to create a list of numbers that will swap with images. The intial page would simply be a list of numbers and 1 static image. Each number, when hovered will change the image with another. I've attempted this by first using DW and not having much success with FW either.
If able to complete this using FW, is it possible to export the file for use in DW? Then insert into an AP Div?

You're over-complicating it.
Simply hit File>Save once you're done in photoshop.
ian

FAE help with export - iphoto crashing

Hello,
I'm trying to use FAE to create the portfolio section (graphic design) of my site. Thanks to the help of a few folks on this forum i've found extensive instructions on how to do so. I've successfully created practice albums with pictures already in my iphoto library. However, I'm currently trying to convert my design files into jpegs in order to import them into iphoto, to finally export them with FAE. When I try to export my created JPEGS with FAE, iphoto crashes. The JPEGS are exported adobe illustrator files that have been, as I mentioned before, imported into iphoto as JPEG files.
I am getting a slightly different prompt with these images as well after I hit export in FAE (when it's asking the location to save the created file to)
I am assuming that the problem is with the created JPEGs, I've tried playing around with the settings a bit with no luck. If anyone has any advice it would be greatly appreciated!
Cheers!
Lilly

Try using this Automator workflow on the original Illustrator/jpg files to convert them again to a jpg file: Convert to JPG and Embed sRGB profile. Then import and try exporting with FAE. You can download it from Toad's Cellar.
Also try using some of your regular jpg files with FAE to see if it will import. If it crashes with other jpgs then it's not the file, it's iPhoto and the plugin. In that case try deleting the iPhoto preference file, com.apple.iPhoto.plist, reboot, repair disk permissions and try again.
An alternative to FAE Exporter is Jalbum. It has more themes/skins and options and the resulting files are added to iWeb the same as those from FAE.

Help with exporting Deski to text file via Web Intelligence

We are currently converting from BO version 5 to BO XI rev2. I have a report that must be scheduled to a flie in plain text format. I am using a deski report. When I save as to text, the file is fine. When I schedule it in webi, the file seems to be missing the end of line character for each row in the table, so it cannot be used for an import to another program. Can anybody help with this?-

well, in that case you need to determine if this issue only happens with a perticular report or all of them, if it happens only with reports imported from 5.x or with newly created reports as well.
Looks like it is happening only when report is exported from Infoview, not in the Deski client. This might indicate a problem at the Web Apllication server (tomcat or one you use).
If this issue is happening with any report - it might be a bug. In that case you have no options as there are no more patches for XIR2.
On the other hand - if all you need is to extract data for consumption in another tool , why not use Data integrator instead ?
Also, if this desn't work in Deski - does it work if you convert your reports to webi and export from those ?

Server goes out of memory when annotating TIFF File. Help with Tiled Images

I am new to JAI and have a problem with the system going out of memory
Objective:
1)Load up a TIFF file (each approx 5- 8 MB when compressed with CCITT.6 compression)
2)Annotate image (consider it as a simple drawString with the Graphics2D object of the RenderedImage)
3)Send it to the servlet outputStream
Problem:
Server goes out of memory when 5 threads try to access it concurrently
Runtime conditions:
VM param set to -Xmx1024m
Observation
Writing the files takes a lot of time when compared to reading the files
Some more information
1)I need to do the annotating at a pre-defined specific positions on the images(ex: in the first quadrant, or may be in the second quadrant).
2)I know that using the TiledImage class its possible to load up a portion of the image and process it.
Things I need help with:
I do not know how to send the whole file back to servlet output stream after annotating a tile of the image.
If write the tiled image back to a file, or to the outputstream, it gives me only the portion of the tile I read in and watermarked, not the whole image file
I have attached the code I use when I load up the whole image
Could somebody please help with the TiledImage solution?
Thx
public void annotateFile(File file, String wText, OutputStream out, AnnotationParameter param) throws Throwable {
ImageReader imgReader = null;
ImageWriter imgWriter = null;
TiledImage in_image = null, out_image = null;
IIOMetadata metadata = null;
ImageOutputStream ios = null;
try {
Iterator readIter = ImageIO.getImageReadersBySuffix("tif");
imgReader = (ImageReader) readIter.next();
imgReader.setInput(ImageIO.createImageInputStream(file));
metadata = imgReader.getImageMetadata(0);
in_image = new TiledImage(JAI.create("fileload", file.getPath()), true);
System.out.println("Image Read!");
Annotater annotater = new Annotater(in_image);
out_image = annotater.annotate(wText, param);
Iterator writeIter = ImageIO.getImageWritersBySuffix("tif");
if (writeIter.hasNext()) {
imgWriter = (ImageWriter) writeIter.next();
ios = ImageIO.createImageOutputStream(out);
imgWriter.setOutput(ios);
ImageWriteParam iwparam = imgWriter.getDefaultWriteParam();
if (iwparam instanceof TIFFImageWriteParam) {
iwparam.setCompressionMode(ImageWriteParam.MODE_EXPLICIT);
TIFFDirectory dir = (TIFFDirectory) out_image.getProperty("tiff_directory");
double compressionParam = dir.getFieldAsDouble(BaselineTIFFTagSet.TAG_COMPRESSION);
setTIFFCompression(iwparam, (int) compressionParam);
else {
iwparam.setCompressionMode(ImageWriteParam.MODE_COPY_FROM_METADATA);
System.out.println("Trying to write Image ....");
imgWriter.write(null, new IIOImage(out_image, null, metadata), iwparam);
System.out.println("Image written....");
finally {
if (imgWriter != null)
imgWriter.dispose();
if (imgReader != null)
imgReader.dispose();
if (ios != null) {
ios.flush();
ios.close();
}

user8684061 wrote:
U are right, SGA is too large for my server.
I guess oracle set SGA automaticlly while i choose default installion , but ,why SGA would be so big? Is oracle not smart enough ?Default database configuration is going to reserve 40% of physical memory for SGA for an instance, which you as a user can always change. I don't see anything wrong with that to say Oracle is not smart.
If i don't disincrease SGA, but increase max-shm-memory, would it work?This needs support from the CPU architecture (32 bit or 64 bit) and the kernel as well. Read more about the huge pages.

Help with unloading images AS3

Please can anyone help me. I am new to Action Script and flash and am having a nightmare unloading images. The code below works but I keep getting the following error messages:
TypeError: Error #2007: Parameter child must be non-null.
at flash.display::DisplayObjectContainer/removeChild()
at index_fla::MainTimeline/clickSection()
ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.
at flash.display::DisplayObjectContainer/removeChild()
at index_fla::MainTimeline/clickSection()
Any help with this would be much appreciated.
var ImgReq01:URLRequest=new URLRequest("images/home/01.jpg");
var ImgReq02:URLRequest=new URLRequest("images/home/02.jpg");
var ImgReq03:URLRequest=new URLRequest("images/home/03.jpg");
var ImgReq04:URLRequest=new URLRequest("images/home/04.jpg");
var ImgReq05:URLRequest=new URLRequest("images/home/05.jpg");
var imgList:Array=[ImgReq01,ImgReq02,ImgReq03,ImgReq04,ImgReq05];
var imgRandom = imgList[Math.floor(Math.random()* imgList.length)];
var imgLoader:Loader = new Loader();
imgLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, onComplete);
imgLoader.load(imgRandom);
function onComplete(event:Event):void
var randomImage:Bitmap = Bitmap(imgLoader.content);
randomImage.x=187.4;
randomImage.y=218.1;
addChild(randomImage);
//handle events for info buttons...
information. addEventListener (MouseEvent.CLICK, clickSection);
home. addEventListener (MouseEvent.CLICK, clickSection);
galleries. addEventListener (MouseEvent.CLICK, clickSection);
function clickSection (evtObj:MouseEvent) {
//Trace shows what's happening.. in the output window
trace ("The "+evtObj.target.name+" button was clicked")
//go to the section clicked on...
gotoAndStop (evtObj.target.name)
// this line is causing errors when navigating between the gallery and information buttons
var Image:Bitmap = Bitmap(imgLoader.content);
removeChild(Image);

you really should be adding the loader to the displaylist, not the content.
try:
var ImgReq01:URLRequest=new URLRequest("images/home/01.jpg");
var ImgReq02:URLRequest=new URLRequest("images/home/02.jpg");
var ImgReq03:URLRequest=new URLRequest("images/home/03.jpg");
var ImgReq04:URLRequest=new URLRequest("images/home/04.jpg");
var ImgReq05:URLRequest=new URLRequest("images/home/05.jpg");
var imgList:Array=[ImgReq01,ImgReq02,ImgReq03,ImgReq04,ImgReq05];
var imgRandom = imgList[Math.floor(Math.random()* imgList.length)];
var imgLoader:Loader = new Loader();
imgLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, onComplete);
imgLoader.load(imgRandom);
function onComplete(event:Event):void
imgLoader.x=187.4;
imgLoader.y=218.1;
addChild(imgLoader);
//handle events for info buttons...
information. addEventListener (MouseEvent.CLICK, clickSection);
home. addEventListener (MouseEvent.CLICK, clickSection);
galleries. addEventListener (MouseEvent.CLICK, clickSection);
function clickSection (evtObj:MouseEvent) {
//Trace shows what's happening.. in the output window
trace ("The "+evtObj.target.name+" button was clicked")
//go to the section clicked on...
gotoAndStop (evtObj.target.name)
// this line is causing errors when navigating between the gallery and information buttons
if(this.contains(imgLoader){
removeChild(imgLoader);

Need help with Export workflow.

Hello again.
Today I was experimenting with exporting a project using Export QT Movie and QT Conversion.
My goal is to show a QT project on the web, either 640x480 or 320xx240, depending on how monstrous the file size is.
My initial impression was that export QT Movie simply generates (I'm guessing) a full size rendering of the project. It's icon is a FC icon. What I did then was an "Open with..." quicktime(pro). This is where I get confused: I know that the next steps are for for preparing the project for sizes, compressions and so on. The export to QT movie seems to be a longer route to get to the settings that you need to use in QT Conversion, which after selecting QT conversion, you have the Format, Use, and Options settings.
Am I right so far?
Some background about my project- Easy setup= DV-NTSC. If I look in my browser, my clips are 720x480, 29.97fps, Compressor(?)DV/DVCPRO-NTSC, pixel aspect ratio, NTSC-CCIR 601 and anamorphic is checked.
I also have still photos motion control stuff, PS tiffs, that do not have anamorphic checked.
Form here on is where I get confused.
Under settings, I am selecting DV/dvc-NTSC for compression frame rate 29.97, medium compressor, scan mode, interlaced, and aspect 4:3.
The filters setting I don't use.
The size setting I'm trying 320x240 with aspect ratio and de interlace video UNCHECKED.
Is this a good workflow for the web. I notice on 640x480 my titles (livetype) seem kind of jagged.
Any help preparing a project for the web would be appreciated. If you need more info let me know.
Thanks so much.
Jonathan

Thanks for the additional comments and ideas.
In terms of profile, as I mentioned, the intermediates will be going off to the editor (off-site) for editing on his FCP suite. I'll stick to working in the prescribed HDTV (Rec. 709) space, and I've given him all the detail I can of how I'm working, but crucially I haven't stood at his edit-suite to see how the stuff looks.
But, he's no newbie, so I'm hoping it'll be OK.
Blasted shame about the H.264 BluRay not being compatible with QT - I thought I had this whole issue beat until that came along. It's not a matter of disk space here, but the editor is mithering that the intermediates we are testing, in either PNG, or Animation, and a couple of others, are choking his playback.
I'm not sure what to say about that, other than to go down this road of trying to squish these intermediates as low as possible without wrecking the look, hence finding that the DNxHD is providing the best solution. If it had been a SD project, I might well have tried the native H.264, even over our normal PNG workflow.
So what will play the native H.264 BluRay compressed output?
Julian.

Help with partial image loss from Viewer to Canvas

Hi--I'm brand new to FCP and would really appreciate any help with my problem. I'm creating 2 second video clips composed of four still images (15 frames...or 500ms each) laid back to back, then rendered. Very simple, I know. The individual images are tiff files that look great in the FCP Viewer. But in the Canvas, part of the image is missing. Specifically, in the center of each image there should be a + sign, about 1cm square. This + should remain constant thoughout the short movie, while the items around it vary (from image to image). (This is a psychology experiment, and the center + is a fixation cross.) The problem is that in the Viewer the + sign is intact, but in the Canvas (and the resulting rendered video), only the vertical bar of the + is present! This is true for every individual tiff, and for the resulting movie. The items around the fixation cross are fine. My question is WHY on earth does the central horizontal bar get "lost" between the Viewer and the Canvas? I've read the manuals, but obviously I've got something set wrong. Also, there is a considerable overall reduction in quality between the viewer and canvas, even though I'm trying my best to maximize video quality. Everything looks a bit blurry. Truly, all ideas are welcome. Sorry if it's obvious. Thanks.
G5 Mac OS X (10.4.3)

steve, i'm viewing on my 23" cinema screen. i read up on quality and know that this is a no-no; that i should only judge quality when viewing on an ntsc monitor or good tv. the problem is that i'll ultimately be displaying these videos on my Dell LCD, so i've got to maximize what i've got. thanks to the discussion boards i have a short list of things to try now. thanks!
-heather

Seeking Help with Album Image Issues in iPod Classic

Hi folks -
I have a new 160 iPod Classic and have two album image-related issues I'd appreciate some help with.
In the case of several albums where I'd associated my own art with them in iTunes, the formatting appeared off in my iPod due to the vertical/horizontal proportions. So I corrected the images, replaced the images via iTunes, and re-synced. All of the old images were replaced - except for two. Is there any way to get my iPod to recognize the change to these two images, as it did for all the others?
Secondly, my "The Allman Brothers Band Live at Fillmore East" album was appearing twice in both the Cover Flow and Album list. That was strange, except that after the latest sync it now appears six times! It's only in one place in iTunes, and not erroneously set as a compilation or anything. This is the only album displaying this behavior...
Thanks for any suggestions or advice!
Frank
Message was edited by: frank3si

Yes my e-mail address is [email protected]
Thank you for your kind attention to my problem. I am looking for one on one brief consultation with my laptop in Cincinnati. If not then I will compose a clear question with VI.
These manuals are well known to me NI Visions Concepts ManualIMAQ Vision for LaVIEW User ManuelNI-IMAQ for USB Cameras My problem is moving to the next step of Create an array of USB imagePerform math on array Display results Sincerely,Tom Lohre cell 513-236-1704, [email protected] http://tomlohre.com/images/lafley.jpgAG Lafley, Chairman & CEO of Proctor & Gamble http://tomlohre.com/lafley.htm A.G. Lafley enjoyed hearing of Tom's painting robot and thought it played well to his new book: "The Game-Changer: How You Can Drive Revenue and Profit Growth With Innovation." http://tomlohre.com/newart.htm
Tom Lohre artist/scientist
Has a operating painting robot using RoboLab/RCX
Developing a LabView/ NXT robot that analyzes an image for aesthetic quality.

Need some help with ".png" image.

Good day everyone. Here's the run down. I need to add an
image (image "A") ontop of another image (image"B"). Image "B" is a
paterned background. And Image "A" a logo with a transparent
background.
As it stands I have image "A" as a "png" and as you know....
they are fri**ing huge! Haveing it as a "gif" only presents me with
the IE6 problem of it adding a colored background to the image.
So I'm stuck! Can any one tell me or point me in the
difection of a tutorial to tell me the best way to add an image
with a transparent background in Dreamweaver.
Really need some help with this!
Thanks all!

>Right you can see the work in progress here>
http://www.stclairecreative.com/DoughBoys_Site_Folder/home.html
Before going much further I'd recommend reconsidering the use
of a textured background. They are usually included for the benefit
of the site owner only, and likely to annoy visitors. Studies on
the subject suggest they often lead to usability problems. I do
like to header graphic, but at 200K it's kinda heavy and can
probably be optimized.

Problem with Export - Image Sizing

Hello, I'm running LR3 on a relatively new iMac. I am using LR to edit RAW photos from my Nikon D700 and one of the things I do is export to .jpg to put some photos on my website. To do this, each photo must be the same width and height, or it causes issues with the website.
For awhile, I was exporting images at dimensions of 960x636 with no issues. All of a sudden, when I use the export feature, and put in the Image Sizing section the 960x636 resolution, the exported file is at a resolution of 956x636 and therefore is not the same size as previously exported photos. I've tried changing some of the settings in the Image Sizing section (check/uncheck Don't Enlarge, Dimensions vs. Width & Height, etc.) and nothing seems to work. Any advice why LR3 is overriding my image size settings would be greatly appreciated.

When you specify the width and height on export, you are specifying a "box" that Lightroom will fit the image into. It will do the best it can, but if your cropped image doesn't have the same aspect ratio as the "box", then one dimension will be short. As an example, if you had cropped your picture into a square, how could Lightroom possibly completely fill a rectangle with it?
You need to crop your images to the same ratio as the 956 : 636 that you're specifying on Export.
Hal

Help with exporting images

Similar Messages

Maybe you are looking for