Help with exporting. Video looks horrible after export, but great when in premiere pro

Hey guys, looking for some advice on exporting.
When I finish a video, the color and everything looks great while in premiere pro, but after exporting it, the color ends up looking dull and the whole video looks blurry. I'm filming with a canon vixia hf200 at 60i. It imports as a AVCHD file, I deinterlace it, and then export at the Vimeo HD settings. What can be causing the video to look horrible after exporting? What settings should I be exporting under? Any help would be appreciated!

It looks like you're coming up against some of the colorspace handling issues that the Premiere pipeline has.
Since your source is 60i AVCHD it's HD and thus rec709 colorspace. If it gets encoded with the standard rec601 colorspace (SD sizes are this) then all the colors get crushed. Look for a "709" and "601" radio button in your export settings. If it's not there you're out of luck.
The "blurry" is probably a poor quality de-interlacer. If Vimeo permits interlaced vs progressive do that instead. it's always cleaner to stay in the same video format all the way through.
TECHNICAL ASIDE:
rec709 is a triangle of possible colors that can be expressed by mixing of ratios of 3 emitters (the R G B corners of the triangle). (they are the RGB phosphors of a CRT and now LCD pixel elements)
rec709 is a bigger triangle than rec601 so it's capable of more colors. but if you accidently map that triangle's corners to the coordinates of rec601 it gets crushed.
In photography the "sRGB" uses the rec709 triangle. A bigger triangle that that is "Adobe RGB". So if you work in Adobe RGB and export to sRGB without conversion the colors get crushed because sRGB in inside the triangle of "Adobe RGB".
http://en.wikipedia.org/wiki/Srgb
http://en.wikipedia.org/wiki/Rec._709
http://upload.wikimedia.org/wikipedia/commons/8/8f/CIExy1931_sRGB.svg

Similar Messages

Video Looks Horrible after Render?

I am working in a HDV 60i timeline with a mix of 60i and 30f codecs. The video looks great until I render. Once the video is rendered it gets really pixelated and ugly. I usually just export without rendering but when I tried it with this video it took about 15 hours and the final result looked exactly like it does after I render. I checked the render settings and they all looked they they are set to the highest quality. When I dump my render files in the timeline the video goes back to looking good? What the heck?!! Please help!!!! I am using FCP 6.06 Thanks.
Jeremy

So that is what is weird. The long export looks great now, (after exporting the smaller pieces, and then bringing the smaller pieces back and exporting the long one) The video looks great, plays great in both quicktime and final cut pro. The file doesn't appear to be corrupted...But after 4 different attempts at compressing to Mpeg2,(on different computers) the video crashes while in compressor. This is the error I am getting. 3x Crash Down. Sorry I kind of combined by two problems, but the problems were essentially the same. Here is a link to my other post. http://discussions.apple.com/thread.jspa?threadID=2363793&tstart=0
This is my normal workflow I use all the time. I have heard your not supposed to use HDV and change to Apple Pro Res, but the HDV workflow works 98% of the time. I tried a couple different settings with the Apple Pro Res, but it seems degrade the image quality quite a bit. I am about to try the Adobe Media Encoder.
Thanks again for your time. Jeremy.

Video looks good in PR but bad when exported

Hello. I hope someone can help me out here. I am doing color corrections in Premiere Pro and it looks good but when I export it, the colors are not as saturated (it needs more color). Do any of you know the reasons why and how I can fix this?
I read that my laptop might need to be calibrated is that true? Is there another way? How do I calibrate it?!!
Please help me. Thanks in advance.

like television and also the theater screen, but I know the theater screen is calibrated so I guess my video needs to be calibrated?
i think thats what the others are getting at.
if on your computer, premiere and vlc and quicktime all look the same there is no problem with premiere.
if your video on your computer looks different than another screen or tv, then its calibration.
you can adjust the saturation on your computer until it looks as dull as the calibrated theater screen, then you should have closer matching displays. in windows you may find a control for you video card, in mac im not sure. then you can adjust saturation in premiere to your clips/timeline.
if you dont want to change your saturation for your laptop, you could use an adjustment layer above the footage and reduce saturation to match the calibrated theater screen. then go back and boost the saturation on clips or previous adjustment layer... once happy with saturation that way, disable the adjustment layer with the reduced saturation for export.

I am receiving excel files, which I need to convert with my macbook pro...I did this with export, but the file I got didnt show graphs as it should...can you help...do I need to buy excel for Apple computer, or is there any easier way of dealing with it..

I am receiving excel files, which I need to convert with my macbook pro...I did this with export, but the file I got didnt show graphs as it should...can you help...do I need to buy excel for Apple computer, or is there any easier way of dealing with it..does App "Numbers" help here?

Numbers should be able to read Excel files without any problems. If Numbers does not read the graphics properly then you can try Excel Online. https://office.live.com/start/Excel.aspx

Video/audio glitch exporting to MPEG-2 in premiere pro CC

Any help with this one?
I have a recurring problem when exporting a normal DV PAL timeline to an MPEG2 file (as required by my client). The exported video will be peppered with audio/video glitches. Normally, I can get around it by deleting single frames around the 'problem' area but that is a very time-consuming, hit-and-miss approach. I see through an online search I am not the first to have this problem but I cannot see any solutions? I regularly clean out the media cache....
Any help appreciated!

Can you define 'glitch'? Or better yet, show us?
Do these glitches exist in the PP sequence, or only after export?
How exactly are you viewing the exported videos?

I need help with my videos now that I downloaded the ios6. It won't play.

I need help with my videos. I downloaded the ios6 and now they won't play. Does anyone know how to fix?

Wanted to let everyone know that after looking at other discussions I did a hard reboot and it is now working. Love this site!

'Video Filter Missing' Exporting AE CS4 project into Premiere Pro CS4 project

Hey guys,
I am new to Premiere and AE, and I just made a short little intro for my current project in After Effects using a couple different effects and such. When I go to export my AE project and make it into a Premiere Project file it will not let me open the project properly, it says:
D:\Premiere Projects\AFC Title2.prproj
Video Filter missing: AE.ADBE Exposure2
Video Filter missing: AE.ADBE Glo2
Video Filter missing: AE.CC Particle World
How do I fix this? Can I get the video filters for Premiere so that it recognizes them?
Thanks,
Andrew

Are you planning on editing the material you're moving from AE to PPro? Not that you can't, but that's sort of a backwards workflow (ie. usually you edit in PPro, and then move the sequence to AE for effects, etc.). Or are you just trying to export from PPro?
Do you have the Production Premium bundle? If so, you could use Dynamic Link to put your AE comp into a PPro timeline, without having to worry about missing filters. You could also render from AE, and then import the rendered movie into PPro.
Finally, you can make (most of) the Cycore effects work in Premiere; this includes Particle World. Simply copy the AEX plugins from the After Effects program folder, into the Premiere Pro program folder (you'll have to dig into a couple of subfolders to find the effects). You'll then have access to most of them in Premiere Pro, though they don't all work the same in the PPro interface. The other two are, I believe, AE-only plugins, and are locked to that program--they won't work in PPro, no matter what.

Help with Audio/Video Settings

Hi All,
I captured DVC Pro 50 material using compression. I used Photo-JPEG at 35%. I am now trying to play that material, but it will not show up on my external monitor (although the sound is coming through). I am assuming that this is a compression problem because material that I have in the project that is not compressed is playing on my external monitor. I am replacing all the materila with compressed material to save space on my drive. however, I don't see a setting in the A/V Devices or the Device Control Preset that will allow my external monitor to show this material.
Can anyone help?
Thanks

i hate to rain on everyone's parade here but this problem lies elsewhere and not with the photo-jpeg video.
i was given several drives chock full of offline rt video and it plays fine out to my monitor. video was captured at offline rt preset resolution (320x240 photojpeg, square par), sequences are offline rt, control is apple dvcpro firewire to a jvc br-dv600ua vtr.
granted, the video looks less than desireable but it's useful none-the-less. i forgot to mention that this in a fcp 4.5 project on my panther boot drive.
perhaps the original poster will give some more info to help nail down the problem. or maybe my quicksilver system doesn't know it isn't supposed to display offline rt video.
zeb

Is it somebody Except for me Who has problems With waching videos on ipad after the 5.0.1 update

Is it somebody Except for me Who has problems With waching videos on ipad after the 5.0.1 update

Hi,
yes I have big problems as soon as I open the video app i get a total black screen, even the upper bar with the time disappears. I already tried to:
1. closing the app and reopen it
2. restart the iPad
3. restore the iPad via iTunes
4. Begging the app to work again.

Help with embedding videos

Hello,
I please need help with embedding videos from youtube. I do this via the Web panel (not the video panel) and copied the embed code on Youtube and pasted it into my Indesign CS6 (autoplay activated). I did it according to that helpful video: http://blogs.adobe.com/jlockman/2013/06/04/embedding-youtube-videos-into-your-dps-project/
However, when testing this on my iPad, only a white box appears and I cannot press a play button.

Are you sure, that you changed code from youtube?
Code from youtube is:
src="//www.youtube.com/embed/KulFWmvbEu4
but you need to change it to
src="https://www.youtube.com/embed/KulFWmvbEu4
For us, best result is to embed video via:
menu Object > Include HTML (don't know exact english name of menu), paste iframe code with correct http link and then it works.

Help with flash video buffering

I need help with flash video buffering. I've created a
buffering graphic to show up when the clip is loading. The problem
that I'm having is that when the video finishs playing, the buffer
is empty and the graphic pops back on. The following is the code
that I'm using to call and buffer the video. Any help would be
great!
stop();
var nc:NetConnection = new NetConnection();
nc.connect(null);
var ns:NetStream = new NetStream(nc);
ns.setBufferTime(10);
ns.onStatus = function(info){
if(info.code == "NetStream.Buffer.Full"){
bufferClip._visible = false;
if(info.code == "NetStream.Buffer.Empty"){
bufferClip._visible = true;
if (info.code == "NetStream.Stop") {
bufferClip._visible = false;
theVideo.attachVideo (ns);
ns.play("my_clip.flv");
rewindButton.onRelease= function(){
ns.seek(0);
playButton.onRelease= function(){
ns.pause();
}

Again thank you for your help in advance...
I put the script folder into the root. As far as the .flv
file it is showing up as being "put" to my web server. when i
checked the root folder it is there. again i am having the same
problem.. the local view works but when i check it on the web it
just shows that there should be a flash video there but it does not
show up.
i created a new root for this test page the new link is..
http://www.wfwa.org/TESTindexfolder/TESTindex.asp
here are the files that are showing up in it...
flashprojectwebvid.fla
flashprojectwebvid.html
flashprojectwebvid.swf
PBSpromo.flv
SteelExternalPlaySeekMute.swf
TESTindex.asp
and the Scripts folder
thanks again for any help..

Suddenly Media Encoder won't export to .avi from a Premiere Pro sequence

Came back to work today and out of the blue Media Encoder just won't export to .avi from a Premiere Pro sequence. Working with CS5 on Windows 7. That was the last thing I did yesterday before leaving work and it worked just fine, and it has always worked without any problems ever since I upgraded from CS4.
Here are the steps I always take: go to Export-->Media from the Premiere Pro sequence and the settings open up, I select Microsoft AVI - PAL DV, click the queue button, AME opens up but nothing loads, the queue remains empty and nothing happens.
I tried the same but selected MPEG-2 instead and it works that way.
I also tried opening the sequence directly from AME and it does it but it doesn't give me the option to export it to Microsoft AVI, it's just not on the list.
I deleted all preferences and old metadata options saved from all applications but that didn't help.
Didn't install any updates whatsoever that might have changed anything at all from yesterday till now.
If anyone knows what the problem might be and how to fix it, that will be truly appreciated, thanks in advance.

After a couple of hours going through the registry and every folder and file inside "Program Files--Adobe--Media Encoder CS5" and trying to find the problem, I did.
Thing is, the ExportAVI.prm plug-in file wasn't missing, it was there in the "Plug-ins--common" folder together with every other exporter and importer file, it just wasn't being loaded by AME for some reason. So i found a folder named "txt" and inside it there was a file named "AddExporterList.txt" which I opened and, as you could probably imagine from its pretty self-explanatory name, it contained a list of the exporter files that AME was supposed to load, and the AVI one wasn't on the list.
I wasn't sure wether it was best for me to edit that text file and add the AVI exporter to the list or just delete the damn thing, so i checked on an older PC with the CS4 suite installed in it and the "txt" folder didn't even exist, so I just deleted it and opened up AME again and it loaded every single exporter .prm file including the ExporterAVI.prm of course and it works just fine now, so that's a load off my shoulders, hope this might help someone else in the future.

Is microsoft avi the highest quality format to export an avi file in premiere pro cs4?

Hello,
I exported an avi file in premiere pro cs4 in media encoder using Microsoft avi format but the quality turned out poor on dvd, what's the highest quality format I can use?
Please help
Thanks
Elio

Elio,
As has been stated, DV-AVI is not the format FOR a DVD-Video. However, it can be used (and often is) as a transport medium into a DVD authoring program, like Encore.
Can you please outline your workflow from PrPro to the final DVD, and is it a DVD-Video (will contain MPEG-2 material in VOB "containers"), or a DVD-Data, that is then played on a computer with something like Windows Media Player, VLC, MediaPlayer Classic HC, etc.?
Good luck, and please let us know exactly what you are doing, and the programs used.
Hunt

Hi, I need help with my iphone four bought in England but I live in Italy, I upgraded IOS six and now I can not read more than the Italian card, how can I contact a service center via email?

Hi, I need help with my iphone four bought in England but I live in Italy, I upgraded IOS six and now I can not read more than the Italian card, how can I contact a service center via email?

Only the carrier it is locked to can authorize unlocking it. Sounds like the phone was hacked to unlock it originally. Find out what carrier it is locked to, and look up their contact information using google or the search engine of your choice.

Options for exporting a project in Adobe premiere Pro CS5.5

When Exporting a project from Adobe premiere Pro CS5.5 I use the format of Windows Media file and Preset HDTV 1080P 30 HighQuality. At the bottom of the window there are some options that say "Use Maximum Render Quality" And "Use Frame Blending". I used these two options on my first video I exported but I want to know for the future what both of these options do exactly to my film and if they could adversely effect things like lighting and the frame rate of a clip or anything?

Max Render Quality does what is says: gives better picture quality, but will lengthen the export process.
Frame Blending you check when output framerate differs from timeline framerate.

Help with exporting. Video looks horrible after export, but great when in premiere pro

Similar Messages

Maybe you are looking for