Help with external hard drive connection

I have two external hard drives. One is connected to my PCMCIA card firewire and the other to the original firewire port. When I get into the final cut pro program, the program shows little red slashes through my different things that I have put into the computer. I need to know how to retrieve those files. The computer does show that the external hard drive is connected, but it shows that the media is offline. I have done this before I just want to know how to reconect the media. I think it should be easy. Please help.

Have a read of of your Final Cut manuals, Volume IV, Chapter 6, Reconnecting Clips and Offline Media, then experiment with ctrl-clicking the offline files and selecting Reconnect Media.
If all is well and you have a good naming convention for your clips, a simple search should reconnect everything. If you have changed volume names or have a whole collection of files named 'Untitled Capture' then you may be in more trouble.

Similar Messages

Blue screen on start up with external Hard drive connected

On start up Imac freezes on light blue screen with external hard drive connected via firewire. Starts okay without hard drive connected. I have repaired the drive with no resolution of the problem.

tpetrini wrote:
On start up Imac freezes on light blue screen with external hard drive connected via firewire.
You might try starting the iMac in "verbose mode" by holding down command-V when booting:
http://support.apple.com/kb/HT1492
That could show you some messages that might explain the problem.
Another approach is to launch the Console utility and look for messages dated around the time of a hang.

Using iPod with external Hard Drive connected to laptop

Is there a way to use the iPod video and an external hard drive connected to a Dell Latitude D600 laptop at the same time? I can use one or the other but not both. When both are connected using the usb ports on the back of the laptop, the iPod is not recognized, the message pops up saying unknown device. I do have the laptop connected to the power outlet. I have no problem using both when I am connected to the usb ports on the docking station at work, only when I have the stand alone laptop at home. I am using a 250GB Maxtor Personal Storage 3100 hard drive.
I found an article on CNet that suggested updating the bios and laptop software. I did this and still have the same issue.

You might have a drive letter conflict.
Both USB devices might be trying to use the same drive letter, and they're sort of "fighting" with eachother over who gets the letter assigned.
Try changing the drive letter of one of your devices.
You can use this article as a reference for changing the drive letter.
http://docs.info.apple.com/article.html?artnum=93499

Help with external hard drive please????

I am ready to chuck my computer out of the window I am so frustrated!! I really hope someone can help... Fingers crossed, here goes...
I have two macs - a MacBook running OSX 4.11 and an iBook G4 running OSX 3.9. I also have an Iomega external hard drive. I reformatted it when I bought it for the MacBook, and have been using it fine.
Now, I want to move a load of music from my iBook to the external hard drive. But when I plug in the hard drive, the iBook says 'MAC OSX CANNOT READ THE VOLUMES INSERTED' and gives me options of initialize, cancel, or eject.
I don't want to initialize as I'm assuming this will re-re-format the ex hd and lose the stuff I have on there already.
Is this the case?
Why won't the Iomega talk to the iBook? (the Iomega website says macs need no drivers for their products...)
Can anyone think of any genius ideas for getting the info off the iBook? Bearing in mind that there is no DVD writer, my internet connection is a teeny 2mb/s and the largest alternative storage device I have is a 2 gigabyte photo card (which i have been using, painstakingly, but is causing me massive grief by taking all night to upload from the ibook and then all day to transfer to the hard drive via the macbook, and losing a bunch of files in the process => AAAAAGH!!!!!). I've also tried firewiring the ibook and macbook together but they don't recognise each other. I created a network and accessed the iomega from the ibook via that but the 2mb/s broadband was so slow it would have taken all week, and the machines crashed anyway.
Thoughts? Ideas? Inspiration? Magic wand????
THANKS

Ok, deep breath & relax...
What format & partition table is the drive in?
On the macbook with drive installed, Open up Mac HD/Applications/Disk Utility.app
Select the drive from the list. If the partition scheme is GUID, then 10.3 won't be able to see it.
& changing requires a reformat of the drive.
So, what I would do is hold T while booting the macbook until the firewire logo shows on the screen. plug the 2 macs together via firewire 400 cable. your macbook should now show up as a firewire drive on the ibook.
drag & drop the files you want to move. eject the drive when done & press power on the macbook to exit this mode. press power again to boot.

Multiple (related?) issues with external hard drive connectivity

Apologies if this has been discussed but I have been unable to find a solution or explanation after searching here and on other forums.
I recently purchased an external hard drive (1TB Iomega Select Portable, bus powered, 2.5", USB 2.0). After formatting with two HFS+ partitions the device began disconnecting unexpectedly and afterwards was often not recognisable by my mac until I rebooted. I returned the product and had it replaced by another of the same model.
The replacement external hard drive worked fine at first but hours later began showing the same symptoms. _It now connects briefly then a few seconds later disconnects._ Occasionally it seems to mount and work fine, but the problem always comes back. In the times when it is working, _Time Machine recognises the drive but only backs up at a rate of about 1KB/s!_
_I don't know if this is a problem with the external hard drive, my USB ports, or settings on my mac._ Any advise you could offer would be greatly appreciated as I've run out of troubleshooting options with my limited knowledge of computers.
_**Some tests I've done:_
1) When it's not being recognised in Finder, it's also not recognised in either Disk Utility or System Profiler
2) At one stage after repeatedly disconnecting, two other external hard drives and two thumb drives that I know work fine normally also failed to mount, but strangely two wireless mouse USB receivers worked fine. Both thumb drives were formatted as FAT32, one of the external hard drives had one HFS+ and one NTFS partition, and the other was entirely NTFS. When they weren't recognised in OS X, the two FAT32 drives and the NTFS partitions of the external hard drives were all recognised in Windows 7 via VMWare Fusion. After restarting the computer all of them now work on both Windows 7 and Mac OS X.
3) I tried the external hard drive on another computer (a PC) and it was recognised in Vista's 'Disk Management' with both partitions marked as 'healthy', but it just called it 'Disk 1' rather than showing the names I'd given each partition.
4) When I first started transferring files onto the drive I often got 'error code -36', but found a solution that seemed to fix that by deleting the '._' files from the source folder through Terminal.
5) I've tried different USB cables, both USB ports on my mac, and also connecting with and without the secondary part of the 'y' cable that was supplied with it.
Thanks very much,
Andrew
Message was edited by: andrewcarter

I have the same problem with some 2.5 drives. My iMac on 10.5.8 sees the drive fine but my older 2007 Mac Book Pro 10.6.6 would not see it and now my new Mac Book Pro had problems seeing the drive from my old Mac Book Pro in that box. I had to use migration utility over the network that took 18 hours to copy my user over. I bought a new drive box and now the drive seems to work fine. I have ejected it a couple times and all seems well. I hope it continues to function properly.

Need Help with External Hard drives and too much music

I am not terribly tech-savvy, and I need your help. I have a G5 PPC dual processor with an internal 250GB drive. I have two seagate firewire/USB2 external hard drives. One is 250GB and one is 350GB. I want to know how to use them to get my Mac to run faster and better.
My original hard drive is 7GB shy of being full. Almost half of this is my itunes library which is over 100GB. The older (250GB) hard drive has about 150GB of photos/videos.
My Mac is running slow as molasses and when I power up the external hard drives it slows down to what I recall my original Mac Plus ran like.
I use the G5 primarily to work with photos, illustrations and creating the occasional DVD with video and photos. the apps I use most often are Photoshop, Illustrator and Painter. I always listen to music while work.
I hope all of this information is helpful! Here is my question:
What is the best way for me to set up and use these external hard drives to return my G5 to its original blazing (to me) fast speed?
PPC G5 Mac OS X (10.4.9)

I think you should look at adding two 500GB internal drives. I'd say Maxtor MaxLine Pro for cost, but they also run much warmer (43ºC even when nearly doing zilch) so I'd go with WD RE2 500GB for $40 ea. more.
dump whatever you don't need, trash anything that is hogging space and is just temp file or useless cache. Web browsers can leave behind a ton of small files eating up tens of MBs.
Use SuperDuper to backup/clone your drive.
Disk Warrior 4 to repair (after it gets to 15% free, or just forget for now).
A 250GB drive formats to 240GB and you have ~3% free it looks like.
For every data drive plan to have two backup drives.
Keep your boot drive to 40% used.
And your data drive to 60%.
Backups can go a little higher.
Drives are cheap and inexpensive, especially for the space and performance. And they have improved SATA over the years it has been out.
By doing a backup followed by erasing your drive, and then restoring it, using SuperDuper, which optimizes the organization, skips copying temp files that aren't needed, it also defragments your files. I would do backup daily to different sets that you "rotate." And before any OS update. And do the erase and restore probably every 2 months.
Make sure you keep one drive partition somewhere that is just your disk utility emergency boot drive that is not a copy of working system, used for doing repairs like running Disk Warrior and Disk Utility.
You may need to repair; backup; even erase and restore your external drives. Rather than spend on vendor made case, just pick up a good FireWire case either with drive, or bare (and add your own). I think it'd add 500GB FW drive though.
Why?
To begin backup of your current drive. To leave your other FW drives "as is" for now.
Then install a new internal 500GB drive as well so you now have a good current backup, and you have moved your data off 250GB to 500GB. If anything happens, you have one off line FW backup.
Then begin to clean up, organize, and get your FW drives working. It sure sounds like they have had some directory or file problems.
You can find a lot of Firewire and SATA drive choices over at OWC:
http://www.macsales.com/firewire/

Need help with external hard drive!

Hi all,
I have been having trouble with my external hard drive.
My mac is reading the disk however all my files from the hard drive are missing?
In disk utility is seems to show that there are files on the disk but I cannot see them?
At the bottom is shows that there are files on the disk!
PLEASE HELP!!!!
Here is a screenshot of my disk utility

Ok just to clarify the format issue...
Just move the data from the external drive, format and then move it back if you want, as JiveMasterT explained.
If the external drive is FAT file system, then you don't need to format the drive unless you are planning on using the drive as an OSX backup.

Why wont my macbook pro boot with external hard drives connected?

After two years of uninterrupted success running my MBP with five external hard drives attached (two USB, two eSATA with LaCie Expresscard 34, one FireWire 800), my MacBook Pro with Mountain Lion 10.8.2 installed will not boot with the drives attached. Starting up with the option key depressed does not work. Anyone have insight? This didn't happen until I upgraded to 10.8.2, so is there a bug fix needed in that update?

Update, I reset the PRAM (i think) and now the chime is back as I start up... small win but thats all it does.
So I decided to dload a copy of Lion and burn to a disc, then try and boot from there. When i boot holding option and select the dvd it sounds like something is happening, contstant turning or reading of the disk, but nothing is happening on screen, just my old friend the apple logo and his mate the spinning wheel. Starting to concede now, just hoping to get my data back, its mostly photos and some files i cant duplicate.
I am going to purchase Mountain lion on my current apple ID using a friends macbook and try and reinstall from there. Although i never had Mountain Lion installed in the first place (just lion) there isnt an option to buy lion on the app store (i dont think) This is prob my last spin of the dice i think before handing it in, unless anyone on here has some ideas....

Help with External Hard Drive

Ok, I have all my music on an external hard drive, and a brand new version of itunes that is completely blank. I'm trying to transfer the music from my external hard drive into Itunes but am having trouble. I've gone to file - add to library - and then chosen my music folder in the external hard drive, and Itunes starts to look like it'll load the songs in, but then nothing happens and the main song menu remains completely blank. Any ideas?

Ok, well i was using limewire to get some llegal shareware files and wanted to make sure i didnot get any viruses.
I am swapping drives, my internaal drive is fucniction yetn when i scanned with disk utility it siad Catalog file, illegal namee (in red) so i booted form my mac install disk ran disk utility, aand it did not fix. So some told me to get disk warrior, which i did, ( i ddownload form there site) and it told me to boot form another drive.... but i could not since m 250 gb drive is corrupted.....so i used a old 10gb drive i had kicking arround... i formated it, then installed maac os x.... and then put disk warrior on it, aandd tried to boot form it.
Yes i am swapping...
O i just thought of this, could i put the hard drives in my windows computer and then use my network to boot form them?????
no, i never iinstalled noton on my exdternalls, jusdt my internal...
how do i burn the disk warrior cd? I Tried burning the disk image and it would not give me the option to boot form it

Problem with External Hard drive connection with PowerBook

I recently bought a Seagate FreeAgent/Go 500gig portable drive (2009) that only has a USB hookup. It does not register or operate on my PowerBook (G4 2005) but works fine on my wife's MacBook (2008). It appears from other discussion boards that it may be the case that not enough power is going through the USB port to the external hard drive. If this is correct is there a recommended solution so I can use the Seagate on both computers? Is there a way to get more power through the USB port?
I'd hate to have to go out and buy another external hard drive with an external power source because it would defeat the purpose of being portable if I have to have separate outlets for both the powerbook and the external hard drive (not to mention more cords). Any suggestions would be greatly appreciated.

Are you sure an additional USB to power or "Y" cable didn't come in the box, ****123? Most USB powered drives seem to come either with a "Y" cable, or an additional USB to power cable, these days.
In fact the "Seagate Freeagent "Go" Quick Start guide (see http://www.seagate.com/staticfiles/support/freeagent/fago_mac_qsgr3.pdf ) actually shows one as necessary for using over USB (though this is the model with FW as well).
Seagate's own troubleshooting document concerning this issue can be found at http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=213059&NewLan g=en
Cheers
Rod

Help with external hard drive and firewire?

2 questions: 1) Does anyone know if there is a hub made for the firewire 800 to allow more than 1 device to be hooked up at 1 time? ex... capture deck and external hard drive.
2) I was cleaning up my external hard drive. I ejected it and now it won't come back on line when it is plugged in. Any Advice?

Most external FW enclosures have 2xFW800 ports that allow daisy-chaining multiple drives.
There are FW800 hubs available, but I don't recommend them if you intend to use with a camcorder or deck. Ditto regarding daisy-chaining a camcorder or deck with a FW drive ... the camcorder/deck usually locks up the FW bus if you have daisy-chained it with a FW drive.

Help with external hard drive issues

After force quit and system freeze my external hard drive wont read. It shows on the desktop but when you click on the icon it make all the other icons disappear for an instant. The drive will show in disk utility and I have verified and ran repair...both say disk seems to be ok. The drive shows in Finder under devices...however when I click on the drive it again makes all the icons disappear for an instant. Does anyone have any suggestions??? I am deployed in Afghanistan and do not have enough bandwidth to download Disk Warrior.

yes, I set it up with time machine as per requested when the hard-drive was first installed. How do i find the settings for my time machine backups? Nevermind, i went to my system preferences and checked it out. It is set to back-up to my external hard drive. yet my mac is still showing that I have 40.62 GB worth of backups on my internal

Help with external Hard Drive on Powermac G5

Hi, i have an Powermac G5, and i also use an external SCSI hard drive, which worked fine the other day, but then today i cant seem to connect to it. usually an icon appears on the desktop but its not there and i cant figure out how to connect to it atall, its all powered up fine and if i go to disk utility its there, but i have no idea what to do.
ive tried various things including re-starting with it powered up, and again switching it on once its powered up.
can anyone please help?

I wondered what card?
Sorry this Sassenach doesn't use SCSI but you could try searching in this forum
http://discussions.apple.com/forum.jspa?forumID=593
Great! Glad you fixed it.
Message was edited by: maclover

Help with external hard drive as time machine

specs of my kit
Processor 3.06 GHz Intel Core i3
Software OS X 10.8.2 (12C60)
iomega ego 1tb external hd
I ahve been using this hd for time machine but it is no longer connecting to the mac. i have tried using usb and firewire cables. no joy. i have tried restarting and shutsown on mac. no joy. in disc utilities no external hd found. in system information under firewire it states firewire bus - unknown device.
any help will be greatly appreciated. i have spnet a lot of jours on other forums with no joy
thnaks
leon

I once had a connection failure to an external Firewire Hard drive. It turned out that the Firewire port on the iMac had stopped working. The eventual solution that solved it and got the Firewire port working again was to reset the SMC and Reset the PRAM:
Resetting the System Management Controller (SMC)
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

How to share external hard drive connected to mac with pc

I have and external hard drive connected to my mac-mini OSX 10.4.11
My iTunes music folder is in it. I want to share my music with my kids in my house so they can hear it in their windows xp computer with windows media player 11
I have the computers connected to a router and I can see the mac files from the pc but I cannot see the external hard drive that is mounted on the desktop of the mac.
The external drive is formatted as "Mac OS Extended (journaled)
Or.... If there is a way that I can duplicate my 80 gigs of music onto the pc that would be great.
I also tried to see the pc from the mac so that I can drag and drop some songs from the iTunes music folder right into the desktop of the pc and I can't get to the pc from the mac. I get an error that says the Alias is incorrect and the PC cannot be accessed.
Please Help my kids are driving me crazy for some music on their computer!
thanks in advance.

Apple has a 'bunch' of articles on sharing iTunes.
Or look at the networking. And then whether you want to put MacDrive on the PC, or use NTFS format and NTFS driver (commercial or free MacFUSE).
And probably want to ask or look in iTunes for Mac and Windows discussions, too.
Most of the things I have (bookmarked) deal with Leopard, not Tiger, so not sure but pretty sure networking is now slightly different.
http://www.apple.com/support/itunes/

Help with external hard drive connection

Similar Messages

Maybe you are looking for