HELP WITH FASCINATE AND MEDIA MANAGER

TRYING TO RUN VZ MEDIA MANAGER WITH FASCINATE TO TRANSFER PICTURES FROM PHONE TO PC BUT THE MEDIA MANAGER SAYS IT MUST SHUT DOWN BUT I CAN STILL USE PROGRAM WITH ERROR MESSAGE UP. WENT THROUGH ALL THE TRANSFER STEPS SAYS PICS WERE TRANSFERRED BUT NOTHING IS THERE ANY IDEAS

Don't use vz mm. It sucks. Make sure you mount your phone/card right. Connect usb cable to phone and the other to a usb port on your cp. Pull down notification bar from the top of the phone screen, select to transfer, mount phone. Then just drag and drop or copy and paste. I ended up deleting the mm because it's slow, doesn't really work and imo is just an attempt towards win mp. Hope this helps!

Similar Messages

ESS-portal integration with Time and Travel management(HR) in R/3

Hi,
Im doing with ESS-portal configuration with Time and Travel Management in R/3,So please kindly send me Documents for integration part.I'll b so thankful if u people send me docu as soon as possible.
send me documents to [email protected]
thanks
pavi

Hi
Please go through this functional module HRMS_BIW_EXTRACT_PY1 in r/3 side to know the exact table where u r getting the data.
There are lot of tables involved in HR-payroll info types.
As far as your problem is concerned you take one employee and go to PA20 and analyse the payroll for each week or twice a month (depends up on ur client)
run the report on the payroll cube and find out exactly what u want.
Thanks
Roopa
Assign points if help full

Help with writing and retrieving data from a table field with type "LCHR"

Hi Experts,
I need help with writing and reading data from a database table field which has a type of "LCHR". I have given an example of the original code but don't know what to change it to in order to fix it and still read in the original data that's stored in the LCHR field.
Basically we have two Function modules, one that saves list data to a database table and one that reads in this data. Both Function modules have an identicle table which has an array of fields from type INT4, CHAR, and type P. The INT4 field is the first one.
Incidentally this worked in the 4.7 non-unicode system but is now dumping in the new ECC6 Unicode system.
Thanks in advance,
C
SAVING THE LIST DATA TO DB
DATA: L_WA(800).
LOOP AT T_TAB into L_WA.
ZDBTAB-DATALEN = STRLEN( L_WA ).
MOVE: L_WA to ZDBTAB-RAWDATA.
ZDBTAB-LINENUM = SY-TABIX.
INSERT ZDBTAB.
READING THE DATA FROM DB
DATA: BEGIN OF T_DATA,
             SEQNR type ZDBTAB-LINENUM,
             DATA type ZDBTAB-RAWDATA,
           END OF T_TAB.
Select the data.
SELECT linenum rawdata from ZDBTAB into table T_DATA
     WHERE repid = w_repname
     AND rundate = w_rundate
     ORDER BY linenum.
Populate calling Internal Table.
LOOP AT T-DATA.
APPEND T_DATA to T_TAB.
ENDLOOP.

Hi Anuj,
The unicode flag is active.
When I run our report and then to try and save the list data a dump is happening at the following point
LOOP AT T_TAB into L_WA.
As I say, T_TAB consists of different fields and field types whereas L_WA is CHAR 800. The dump mentions UC_OBJECTS_NOT_CONVERTIBLE
When I try to load a saved list the dump is happening at the following point
APPEND T_DATA-RAWDATA to T_TAB.
T_DATA-RAWDATA is type LCHR and T_TAB consists of different fields and field types.
In both examples the dumps mention UC_OBJECTS_NOT_CONVERTIBLE
Regards
C

Help with count and sum query

Hi I am using oracle 10g. Trying to aggregate duplicate count records. I have so far:
SELECT 'ST' LEDGER,
CASE
WHEN c.Category = 'E' THEN 'Headcount Exempt'
ELSE 'Headcount Non-Exempt'
END
ACCOUNTS,
CASE WHEN a.COMPANY = 'ZEE' THEN 'OH' ELSE 'NA' END MARKET,
'MARCH_12' AS PERIOD,
COUNT (a.empl_id) head_count
FROM essbase.employee_pubinfo a
LEFT OUTER JOIN MMS_DIST_COPY b
ON a.cost_ctr = TRIM (b.bu)
INNER JOIN MMS_GL_PAY_GROUPS c
ON a.pay_group = c.group_code
WHERE a.employee_status IN ('A', 'L', 'P', 'S')
AND FISCAL_YEAR = '2012'
AND FISCAL_MONTH = 'MARCH'
GROUP BY a.company,
b.district,
a.cost_ctr,
c.category,
a.fiscal_month,
a.fiscal_year;
which gives me same rows with different head_counts. I am trying to combine the same rows as a total (one record). Do I use a subquery?

Hi,
Whenever you have a problem, please post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) from all tables involved.
Also post the results you want from that data, and an explanation of how you get those results from that data, with specific examples.
user610131 wrote:
... which gives me same rows with different head_counts.If they have different head_counts, then the rows are not the same.
I am trying to combine the same rows as a total (one record). Do I use a subquery?Maybe. It's more likely that you need a different GROUP BY clause, since the GROUP BY clause determines how many rows of output there will be. I'll be able to say more after you post the sample data, results, and explanation.
You may want both a sub-query and a different GROUP BY clause. For example:
WITH    got_group_by_columns     AS
     SELECT a.empl_id
     ,     CASE
                    WHEN c.category = 'E'
              THEN 'Headcount Exempt'
                    ELSE 'Headcount Non-Exempt'
            END          AS accounts
     ,      CASE
                    WHEN a.company = 'ZEE'
                    THEN 'OH'
                    ELSE 'NA'
            END          AS market
     FROM              essbase.employee_pubinfo a
     LEFT OUTER JOIN mms_dist_copy             b ON   a.cost_ctr     = TRIM (b.bu)
     INNER JOIN       mms_gl_pay_groups        c ON   a.pay_group      = c.group_code
     WHERE     a.employee_status     IN ('A', 'L', 'P', 'S')
     AND        fiscal_year           = '2012'
     AND        fiscal_month          = 'MARCH'
SELECT    'ST'               AS ledger
,       accounts
,       market
,       'MARCH_12'          AS period
,       COUNT (empl_id)      AS head_count
FROM       got_group_by_columns
GROUP BY accounts
,            market
;But that's just a wild guess.
You said you wanted "Help with count and sum". I see the COUNT, but what do you want with SUM? No doubt this will be clearer after you post the sample data and results.
Edited by: Frank Kulash on Apr 4, 2012 5:31 PM

MOVED: [Athlon64] Need Help with X64 and Promise 20378

This topic has been moved to Operating Systems.
[Athlon64] Need Help with X64 and Promise 20378

I'm moving this the the Administration Forum. It seems more apporpiate there.

Help with Facebook and Social Media wigets (Was: How do I fix the three probs that...)

I am having problems with the facebook or social media widgets. I would like the link to send viewers to my facebook business page, but when testing it shows my pic and a 'switch' sign (see screen shot) and when I open the site the message is as the other screenshot, great, but I don't know where to find which 'asset' is the problem and why. Also why bother having child pages if the menu doesn't reflect that? I see that drop down menus are an issue, also with some other forum members.
Thanks for any help offered!, I think I have solved the first problem now but still would appreciate any help with the other 2!
For some reason the facebook widget now loads the correct page, and I give up about the drop down menu, hopefully this will be addressed in the next update of Muse??

Hello,
For the "asset" issue, try locating the asset in the assets panel. It should have an icon like this: http://jingsite.businesscatalyst.com/jing/2013-12-16_0917.png
For the child pages in the menus issue, go to the menu options (by clicking the small blue arrow in the right top corner of the menu), and then change the menu type to "All Pages" instead of "Top Level Pages".
Hope this helps.
Cheers
Parikshit

Help with N8 and Adobe Premiere?

Hi, I am using Adobe Premiere Pro CS4 v4.1.0.
I recently got a Nokia N8 and am now trying to edit the video recordings, but am having some problems.
The phone records at 25fps 1280x720 using H.264 MPEG-4 codec, with sound in Stereo 130kbps 48 kHz.
When I create a project and load the .mp4 file into it, the first problem I see is that it reads it as 500fps and the video is only a second or 2 long.
I then interpret the footage to the correct 25fps, and the video then works fine. However, the sound seems to not be there.
I've noticed that due to Premiere interpreting it as 500fps, it thus only plays the first second or two of the sound when left as 500fps and plays all the video in that second or two, and thus when changing to the correct 25fps, it is therefore only the two seconds playing over the entire minute of video.
I also tried changing the file into other formats. The only other one that kind of worked was .mov. It allowed the sound to work perfectly, the video loaded at correct frames, however, when playing the video on premiere, it then showed black screen for most of the clip.
Have tried to find out about this online and installed a couple different codec packs and media players, but nothing helped with this problem in Adobe Premiere. However, the clip played fine in the media players, such as RealPlayer.
If anyone has any advice on this, it would be appreciated. I would prefer to fix this issue correctly rather than have to manually interpret or transcode the footage each time I want to edit it.
Btw, I also posted this question on a forum with Nokia N8 Users, and others also tried it out and had same or similar issues. They also tried on CS5 and it still didn't work.
*UPDATE* I just tested again to change the file from .mp4 to .mov by simply renaming it, and this time it loaded perfectly into Premiere. However, I have to do this on my XP computer, as my Windows 7 doesn't change the format of file by simply renaming it. Hence, I would still like help with getting it to recognise the .mp4 correctly though in the first place, rather than having to rename my files each time on the XP computer.

Moshpit84 did you utilize the uninstallers located in Applications/Utilities/Adobe Installers to remove your installation of Premiere Pro? Also what version of the Adobe Application Manager are you currently using?

IPad and Media Manager Issues

I just installed the Verizon Media Manager App on my iPad and it will not pull anything from my pc. It keeps telling me to register. It lets me sign in with my id, lets me bookmark things, but I cannot pull media from my PC. It is very frustrating. Want to be able to view flex view stuff for the kids while on the road and cannot. Also cannot find the fios on demand app in the App store. Please help. The other app that is not working at all is the MY VZ account app. I cannot check bills, pay bills, check email or anything you should be able to do with it. If the app's are buggy, pull them. Please advise with any solutions.

Here's the master page for all of Verizon's apps. Right now only the Media Manager app is available for iPad.
In order to view your personal media, it must first be uploaded to your FlexView Library. This can be done using the Media Manager application on your PC or Mac.
The Media Manager iPad app also allows you to stream Flex View movies and TV shows you have purchased from Verizon, whether you bought it on your set-top-box, PC or phone. In other words, it also serves as the FiOS On Demand app.

Need help understanding profiles and color management

I made the big leap from inexpensive inkjets to:
1 Epson 3800 Standard
2 Spyder3Studio
I have a Mac Pro Quad, Aperture, PS3, etc.
I have a steep learning curve ahead, here's what I've done:
1 Read a lot of books, watched tutorials, etc.
2 Calibrated the monitor
3 Calibrated the printer several times and created .icc profiles
What I've found:
1 The sample print produced by Spyder3Print, using the profile I created with color management turned off in the print dialog, looks very good.
2 When I get into Aperture, and apply the .icc profile I created in the proofing profile with onscreen proofing, the onscreen image does not change appreciably compared with the no proof setting. It gets slightly darker
3 When I select File>Print image, select the profile I created, turn off color management and look a the resulting preview image it looks much lighter and washed out than the onscreen image with onscreen proofing turned on.
4 When I print the image, it looks the same as was shown in the print preview...light and washed out, which is much different than what is shown in edit mode.
5 When I open PS3 with onscreen soft-proofing, the onscreen image is light and washed out...just like displayed in PS3 preview. If I re-edit the image to look OK onscreen, and print with the profile and color management turned off, the printed image looks OK.
So, why am I confused?
1 In the back of my simplistic and naive mind, I anticipated that in creating a custom printer profile I would only need to edit a photo once, so it looks good on the calibrated screen, and then a custom printer profile will handle the work to print a good looking photo. Different profiles do different translations for different printers/papers. However, judging by the PS work, it appears I need to re-edit a photo for each printer/paper I encounter...just doesn't seem right.
2 In Aperture, I'm confused by the onscreen proofing does not present the same image as what I see in the print preview. I'm selecting the same .icc profile in both locations.
I tried visiting with Spyder support, but am not able to explain myself well enough to help them understand what I'm doing wrong.
Any help is greatly appreciated.

Calibrated the printer several times and created .icc profiles
You have understand that maintaining the colour is done by morphing the colourants, and you have understood that matching the digital graphic display (which is emissive) to the print from the digital graphic printer (which is reflective) presupposes a studio lighting situation that simulates the conditions presupposed in the mathematical illuminant model for media independent matching. Basically, for a display-to-print match you need to calibrate and characterise the display to something like 5000-55000 kelvin. There are all sorts of arguments surrounding this, and you will find your way through them in time, but you now have the gist of the thing.
So far so good, but what of the problem posed by the digital graphic printer? If you are a professional photographer, you are dependent on your printer for contract proofing. Your prints you can pass to clients and to printers, but your display you cannot. So this is critical.
The ICC Specification was published at DRUPA Druck und Papier in Düsseldorf in May 1995 and ColorSync 2 Golden Master is on the WWDC CD for May 1995. Between 1995 and 2000 die reine Lehre said to render your colour patch chart in the raw condition of the colour device.
The problem with this is that in a separation the reflectance of the paper (which is how you get to see the colours of the colourants laid down on top of the paper) and the amount of colourant (solid and combinations of tints) gives you the gamut.
By this argument, you would want to render the colour patch chart with the most colourant, but what if the most colourant produces artifacts? A safer solution is to have primary ink limiting as part of the calibration process prior to rendering of the colour patch chart.
You can see the progression e.g. in the BEST RIP which since 2002 has been owned by EFI Electronics for Imaging. BEST started by allowing access to the raw colour device, with pooling problems and whatnot, but then introduced a primary ink limiting and linearisation.
The next thing you need to know is what colour test chart to send to the colour device, depending on whether the colour device is considered an RGB device or a CMYK device. By convention, if the device is not driven by a PostScript RIP it is considered an RGB device.
The colour patch chart is not tagged, meaning that it is deviceColor and neither CIEBased colour or ICCBased colour. You need to keep your colour patch chart deviceColor or you will have a colour characterisation of a colour managed conversion. Which is not what you want.
If the operating system is colour managed through and through, how do you render a colour test chart without automatically assigning a source ICC profile for the colourant model (Generic RGB Profile for three component, Generic CMYK Profile for four component)?
The convention is that no colour conversion occurs if the source ICC device profile and the destination ICC device profile are identical. So if you are targetting your inkjet in RGB mode, you open an RGB colourant patch chart, set the source ICC profile for the working space to the same as the destination ICC profile for the device, and render as deviceColor.
You then leave the rendered colourant test chart to dry for one hour. If you measure a colourant test chart every ten minutes through the first hour, you may find that the soluble inkjet inks in drying change colour. If you wait, you avoid this cause of error in your characterisation.
As you will mainly want to work with loose photographs, and not with photographs placed in pages, when you produce a contract proof using Absolute Colorimetric rendering from the ICC profile for the printing condition to the ICC profile for your studio printer, here's a tip.
Your eyes, the eyes of your client, and the eyes of the prepress production manager will see the white white of the surrounding unprinted margins of the paper, and will judge the printed area of the paper relative to that.
If, therefore, your untrimmed contract proof and the contract proof from Adobe InDesign or QuarkPress, or a EFI or other proofing RIP, are placed side by side in the viewing box your untrimmed contract proof will work as the visual reference for the media white.
The measured reference for the media white is in the ICC profile for the printing condition, to be precise in the WTPT White Point tag that you can see by doubleclicking the ICC profile in the Apple ColorSync Utility. This is the lightness and tint laid down on proof prints.
You, your client and your chosen printer will get on well if you remember to set up your studio lighting, and trim the blank borders of your proof prints. (Another tip: set your Finder to neutral gray and avoid a clutter of white windows, icons and so forth in the Finder when viewing.)
So far, so good. This leaves the nittygritty of specific ICC profiling packages and specific ICC-enabled applications. As for Aperture, do not apply a gamma correction to your colourant patch chart, or to colour managed printing.
As for Adobe applications, which you say you will be comparing with, you should probably be aware that Adobe InDesign CS3 has problems. When targetting an RGB printing device, the prints are not correctly colour managed, but basically bypass colour management.
There's been a discussion on the Apple ColorSync Users List and on Adobe's fora, see the two threads below.
Hope this helps,
Henrik Holmegaard
technical writer
References:
http://www.adobeforums.com/webx?14@@.59b52c9b/0
http://lists.apple.com/archives/colorsync-users/2007/Nov/msg00143.html

Problems with V Cast Media Manager on my phone

So it was working fine. I transferred some pictures and music over to my phone and was listening to it/using it as ringtones. The a few things happened:
Some songs won't work as ringtones but I do not know why.
Somehow a few songs were transferred over to my phone but I do not know how to delete them. I can't under media manager or when I go to music. They won't play and are just called 'unknown' for each one. How do I remove them?
Then when I moved songs on my computer app into my HTC node, it says the songs transferred but they didn't.
Can anyone help with them? Especially the removing songs off my phone.

Hello CT12874,
Vcast Media Manager is a great feature that I would like to help you experience! I would like to suggest two things that may assist you. Navigate to Settings>Applications>Development>Check USB debugging and power cycle your device. When you power up and plug in your device at the very top you should be able to pull down the notification bar and I would like for you to choose USB mass storage and test Vcast Media Manager. If you are successful great if your device is still not recognized please advise me so I may further assist. Thank you.
Click here for a list of Vcast Media Manager Requirements

Re-capturing in different format....and media manager?

Okay this project's media and settings are all as DV NTSC Anamorphic, but when the client approves everything, I need to re-load the media as it's original HD 1080i60 format. As I'm thinking about the process I'll take, I want to get opinions from you guys b/c I've never done this before. I've used Media Manager for eliminating all other/unused media, etc....but would I use it for this instance?
I know I'll want a separate project with the appropriate HD settings and to make the media in the sequence re-load as HD. But another thing is that I'm wondering how that even works since the clip properties are already permanently set...
Sorry, hope this makes sense...I need more sleep!

G'day,
When you go to re-digitize your sequence in the new HD project:
1. select all the clips on the appropriate timeline
2. open the Log & Capture window
3. set your capture settings to your desired HD format
4. select all clips in T/L and batch digitize
5. *important* make sure to UNCHECK the Options: 'Use Logged Clip Settings' box
6. add handles if you wish
Hope this helps.
Tim
PowerBook G4, dual G5, Xsan Mac OS X (10.4.6)

Problem with Drag and drop manager

I am noticing that the sample provided at
http://livedocs.adobe.com/flex/3/html/help.html?content=dragdrop_7.html is not working when tried on any version of FireFox browser on a Mac OS version 10.6.3.
So my understanding is that there seems to be some problem with the drag and drop manager in Flex when used on Firefox on a Mac OS version 10.6.3.
It will be very helpful if you can provide any work around for this issue. We want to implement the drag and drop feature in a website that we are building for one of our clients.

You must be an Oracle employee as you're referring to a component in the upcoming JDeveloper version which has yet been released to the general public. Oracle employee's are, I believe, directed to post on internal Oracle forums.
CM.

I need some help with AVI and IDX files please.

Hello there,
I've just been given a hard drive with a load of media on it that I need to work with in FCP.
There's a folder with many .AVI clips, and each clip has an accompanying directory file with the extension .IDX
The format of the AVI files is DV, 720x576, 48kHz.
For the life of me, I can't get FCP to accept the media. Log and Transfer won't accept them, and if i bring in the AVI files in on their own using File>Import>Files... I get a message saying:
Media Performance Warning
It is highly recommended that you either recapture the media or use the Media manager to create new copies of the files to improve their performance for multi-stream playback.
I can click 'OK' for this message and the media will appear in the browser, but If I place one of these AVI files on a new conformed sequence, the audio needs rendering. (Sequence settings correspond to media settings)
I tried just changing the wrapper from AVI to MOV, thinking I could fool FCP into accepting them, but I get the same rejection.
I thought the audio and video signals might be muxed, so I tried MPEG Streamclip to sort that out, but even MPEG Streamclip doesn't accept the media, saying : File open error: Can't find video or audio tracks.
Could anybody advise me on how to get the most out of these media files please?
Thanks in advance.
James.
Message was edited by: James M.
Message was edited by: James M.

yes. I tried transcoding in QT, but they still come in with the same audio rendering required. I'm a bit loath to convert them all though, as there are 1400 clips.
It's not a huge problem, as they do play in FCP, but I'd like to sort out the audio rendering. I don't understand why it needs rendering as the media and sequence audio settings match, and it's not some weird format or anything, it's bog standard 48kHz stereo.

Help with WindowsDesktopSSO and AMIdentity.getAttributes

Hi guys and girls,
I need some help from you experts.
I successfully setup, thanks to this guide
http://blogs.oracle.com/knittel/entry/opensso_windowsdesktopsso
and a lot of trial & errors and googling a Kerberos authentication between OpenAM version 9.5.2 and an Active Directory Server.
When I navigate to openAM page (from a domain machine) http://<openAMhost>:<port>/opensso, it doesn't ask for credentials ...
and I can see, with ieHttpHeaders, kerberos data exchange.
Without creating an Active Directory DataStore (pointing to the same domain where I use kerberos data) in openAM,
when I navigate (from a domain machine) to /opensso/idm/EndUser page, it always gives me:
"Plug-in com.sun.identity.idm.plugins.ldapv3.LDAPv3Repo encountered an ldap exception. LDAP Error 32: The entry specified in the request does not exist."
Since my aim was to get user information from a web app ... I thought I could have done this with an agent/SDK call as I usually do with "classic" authentication.
Now I created a J2EE Agent (on openAM) to protect one of my application deployed on a JBoss 4.2.1-GA server.
Agent configured with default options and these changes:
Agent Filter Mode: J2EE_POLICY
User Mapping Mode: USER_ID
User Attribute Name: tried both with employeenumber and uid
User Principal Flag: enabled
User Token Name: UserToken
FQDN Check: tried both with enabled and disabled
WebAuthentication Available : Enabled
In my application WEB-INF/jboss-web.xml looks like this:
     <?xml version="1.0" encoding="UTF-8"?>
     <jboss-web>
          <security-domain>java:/jaas/AMRealm</security-domain>
     </jboss-web>Usually, when I authenticate with "classic" (internal datastore) login, I can get user attributes programmatically with a code like this:
       private String getCredenzialiUtente(HttpServletRequest request)
            String                 SSOUsername      = null;
            SSOToken               ssoToken      = null;
            SSOTokenManager        manager           = null;
              try
                manager = SSOTokenManager.getInstance();
                if ( manager == null)
                     throw new RuntimeException("Unable to Get: SSOTokenManager");
                String ssoTokenID = AmFilterManager.getAmSSOCache().getSSOTokenForUser(request);
                ssoToken = manager.createSSOToken(ssoTokenID);
                if ( ssoToken == null )
                      throw new RuntimeException("Unable to Get: TokenForUser");
                AMIdentity amid = new AMIdentity(ssoToken);
                if(amid == null)
                   throw new RuntimeException("Unable to Get: UserIdentity");
                SSOUsername = amid.getName();
                System.out.println("######### USERNAME FROM SSO: " + SSOUsername);
                Set<String> info = new HashSet<String>();
                info.add("uid");
                info.add("givenName");
                java.util.Map mappa = amid.getAttributes(info);
                if ( mappa != null )
                    java.util.Set insieme = mappa.keySet();
                    java.util.Iterator it = insieme.iterator();
                    while ( it.hasNext() )
                        String n = it.next().toString();
                        System.out.println( n + " ==> " + mappa.get(n) );
                else
                    System.err.println(" DAMN - NO ATTR ");
          catch (Exception exception)
            exception.getMessage();
            exception.printStackTrace();
          System.out.println("OUT getCredenzialiUtente: " + SSOUsername);
          return SSOUsername;
        }        When I log to console with default "ldapService" module (outside the domain), I can get something like:
     2011-09-29 13:14:38,733 INFO [STDOUT] ####################################### USER = amadmin
     2011-09-29 13:15:32,250 INFO [STDOUT] IN getCredenzialiLAit
     2011-09-29 13:15:32,260 INFO [STDOUT] ######### USERNAME DA SSO: a2zarrillo
     2011-09-29 13:15:32,291 INFO [STDOUT] uid ==> [a2zarrillo]
     2011-09-29 13:15:32,291 INFO [STDOUT] givenName ==> [Antonio2]
     2011-09-29 13:15:32,311 INFO [STDOUT] OUT getCredenziali: a2zarrillo
     2011-09-29 13:15:32,321 INFO [STDOUT] ####################################### USER = a2zarrillobut when i try to login from inside the domain (with kerberos, so no credentials) with a domain user, I get:
     2011-09-29 13:15:39,496 INFO [STDOUT] IN getCredenzialiLAit
     2011-09-29 13:15:39,503 INFO [STDOUT] ######### USERNAME DA SSO: tonyweb
     2011-09-29 13:15:39,550 ERROR [STDERR] Message:Plug-in encountered an ldap exception. LDAP Error 32: The entry specified in the request does not exist.
     2011-09-29 13:15:39,554 ERROR [STDERR]      at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     2011-09-29 13:15:39,560 ERROR [STDERR]      at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     2011-09-29 13:15:39,562 ERROR [STDERR]      at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     2011-09-29 13:15:39,566 ERROR [STDERR]      at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     2011-09-29 13:15:39,574 ERROR [STDERR]      at com.sun.identity.shared.jaxrpc.SOAPClient$SOAPContentHandler.createResourceBasedException(SOAPClient.java:834)
     2011-09-29 13:15:39,575 ERROR [STDERR]      at com.sun.identity.shared.jaxrpc.SOAPClient$SOAPContentHandler.endDocument(SOAPClient.java:800)
     2011-09-29 13:15:39,578 ERROR [STDERR]      at org.apache.xerces.parsers.AbstractSAXParser.endDocument(Unknown Source)
     2011-09-29 13:15:39,582 ERROR [STDERR]      at org.apache.xerces.impl.XMLDocumentScannerImpl.endEntity(Unknown Source)
     2011-09-29 13:15:39,587 ERROR [STDERR]      at org.apache.xerces.impl.XMLEntityManager.endEntity(Unknown Source)
     2011-09-29 13:15:39,592 ERROR [STDERR]      at org.apache.xerces.impl.XMLEntityScanner.load(Unknown Source)
     2011-09-29 13:15:39,598 ERROR [STDERR]      at org.apache.xerces.impl.XMLEntityScanner.skipSpaces(Unknown Source)
     2011-09-29 13:15:39,600 ERROR [STDERR]      at org.apache.xerces.impl.XMLDocumentScannerImpl$TrailingMiscDispatcher.dispatch(Unknown Source)
     2011-09-29 13:15:39,604 ERROR [STDERR]      at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
     2011-09-29 13:15:39,607 ERROR [STDERR]      at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     2011-09-29 13:15:39,609 ERROR [STDERR]      at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     2011-09-29 13:15:39,613 ERROR [STDERR]      at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
     2011-09-29 13:15:39,616 ERROR [STDERR]      at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
     2011-09-29 13:15:39,621 ERROR [STDERR]      at org.apache.xerces.jaxp.SAXParserImpl$JAXPSAXParser.parse(Unknown Source)
     2011-09-29 13:15:39,625 ERROR [STDERR]      at com.sun.identity.shared.jaxrpc.SOAPClient.send(SOAPClient.java:343)
     2011-09-29 13:15:39,633 ERROR [STDERR]      at com.sun.identity.shared.jaxrpc.SOAPClient.send(SOAPClient.java:311)
     2011-09-29 13:15:39,636 ERROR [STDERR]      at com.sun.identity.idm.remote.IdRemoteServicesImpl.getAttributes(IdRemoteServicesImpl.java:229)
     2011-09-29 13:15:39,639 ERROR [STDERR]      at com.sun.identity.idm.remote.IdRemoteCachedServicesImpl.getAttributes(IdRemoteCachedServicesImpl.java:402)
     2011-09-29 13:15:39,642 ERROR [STDERR]      at com.sun.identity.idm.AMIdentity.getAttributes(AMIdentity.java:344)
     2011-09-29 13:15:39,645 ERROR [STDERR]      at org.apache.jsp.MainPageJSP_jsp.getCredenzialiUtente(MainPageJSP_jsp.java:63)
     2011-09-29 13:15:39,648 ERROR [STDERR]      at org.apache.jsp.MainPageJSP_jsp._jspService(MainPageJSP_jsp.java:217)
     2011-09-29 13:15:39,653 ERROR [STDERR]      at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
     2011-09-29 13:15:39,660 ERROR [STDERR]      at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     2011-09-29 13:15:39,664 ERROR [STDERR]      at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:387)
     2011-09-29 13:15:39,666 ERROR [STDERR]      at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
     2011-09-29 13:15:39,669 ERROR [STDERR]      at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
     2011-09-29 13:15:39,673 ERROR [STDERR]      at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     2011-09-29 13:15:39,676 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
     2011-09-29 13:15:39,678 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     2011-09-29 13:15:39,683 ERROR [STDERR]      at com.sun.identity.agents.filter.AmAgentBaseFilter.allowRequestToContinue(AmAgentBaseFilter.java:127)
     2011-09-29 13:15:39,685 ERROR [STDERR]      at com.sun.identity.agents.filter.AmAgentBaseFilter.doFilter(AmAgentBaseFilter.java:76)
     2011-09-29 13:15:39,690 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
     2011-09-29 13:15:39,697 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     2011-09-29 13:15:39,701 ERROR [STDERR]      at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:687)
     2011-09-29 13:15:39,705 ERROR [STDERR]      at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:469)
     2011-09-29 13:15:39,710 ERROR [STDERR]      at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:403)
     2011-09-29 13:15:39,713 ERROR [STDERR]      at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:301)
     2011-09-29 13:15:39,716 ERROR [STDERR]      at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:408)
     2011-09-29 13:15:39,725 ERROR [STDERR]      at com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:442)
     2011-09-29 13:15:39,729 ERROR [STDERR]      at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:115)
     2011-09-29 13:15:39,730 ERROR [STDERR]      at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:178)
     2011-09-29 13:15:39,734 ERROR [STDERR]      at com.cid.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:92)
     2011-09-29 13:15:39,741 ERROR [STDERR]      at com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.renderView(ViewHandlerImpl.java:295)
     2011-09-29 13:15:39,744 ERROR [STDERR]      at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:106)
     2011-09-29 13:15:39,747 ERROR [STDERR]      at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:251)
     2011-09-29 13:15:39,750 ERROR [STDERR]      at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:144)
     2011-09-29 13:15:39,753 ERROR [STDERR]      at javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
     2011-09-29 13:15:39,761 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
     2011-09-29 13:15:39,765 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     2011-09-29 13:15:39,768 ERROR [STDERR]      at com.cid.faces.webapp.CidWebUIFilter._invokeDoFilter(CidWebUIFilter.java:239)
     2011-09-29 13:15:39,776 ERROR [STDERR]      at com.cid.faces.webapp.CidWebUIFilter._doFilterImpl(CidWebUIFilter.java:196)
     2011-09-29 13:15:39,780 ERROR [STDERR]      at com.cid.faces.webapp.CidWebUIFilter.doFilter(CidWebUIFilter.java:80)
     2011-09-29 13:15:39,788 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
     2011-09-29 13:15:39,793 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     2011-09-29 13:15:39,797 ERROR [STDERR]      at com.sun.identity.agents.filter.AmAgentBaseFilter.allowRequestToContinue(AmAgentBaseFilter.java:127)
     2011-09-29 13:15:39,803 ERROR [STDERR]      at com.sun.identity.agents.filter.AmAgentBaseFilter.doFilter(AmAgentBaseFilter.java:76)
     2011-09-29 13:15:39,807 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
     2011-09-29 13:15:39,810 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     2011-09-29 13:15:39,813 ERROR [STDERR]      at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
     2011-09-29 13:15:39,820 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
     2011-09-29 13:15:39,825 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     2011-09-29 13:15:39,829 ERROR [STDERR]      at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
     2011-09-29 13:15:39,833 ERROR [STDERR]      at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
     2011-09-29 13:15:39,836 ERROR [STDERR]      at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:179)
     2011-09-29 13:15:39,843 ERROR [STDERR]      at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
     2011-09-29 13:15:39,846 ERROR [STDERR]      at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
     2011-09-29 13:15:39,851 ERROR [STDERR]      at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:104)
     2011-09-29 13:15:39,854 ERROR [STDERR]      at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:157)
     2011-09-29 13:15:39,857 ERROR [STDERR]      at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     2011-09-29 13:15:39,860 ERROR [STDERR]      at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:241)
     2011-09-29 13:15:39,862 ERROR [STDERR]      at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
     2011-09-29 13:15:39,866 ERROR [STDERR]      at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:580)
     2011-09-29 13:15:39,870 ERROR [STDERR]      at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
     2011-09-29 13:15:39,874 ERROR [STDERR]      at java.lang.Thread.run(Thread.java:619)
     2011-09-29 13:15:39,877 INFO [STDOUT] OUT getCredenziali: tonywebAs you can see I'm using the "sample" agentApp.war.
What am I missing ? It "crashes" as for getAttributes() call :/
I thought it could be because I didn't setup LDAP DataStore ... so I set up Active Directory Data Store.
While in openAM console (from outside domain) I can see (from Subjects tab) Active Directory users and relative information
(like FirstName (=givenName), Surname (=sn), Full Name (=cn), etc.) ... when I try again with idm/EndUser (from a domain machine)
I get the same error:
     Message:Plug-in encountered an ldap exception. LDAP Error 32: The entry specified in the request does not exist.What should I do now ?
If you need more clarifications ... just ask :)
Thank you in advance and sorry for the big post.
Best Regards,
Tony
P.D. By the way, my OpenAM configuration does not create any "amAuthWindowsDesktopSSO.log" :(
I setup, from opensso/Debug.jsp message level for Authentication ... but it still doesn't create this log ... can you please tell me how to let openAM write it ?
Again thank you

Weird enough, changing to ADAM data store (and not "standard" AD datastore) solved the problem :D
I still wonder why since both plugins share the same java [implementing] class...
Regards,
Tony

Using Search Help with ALV and Dynamic context node

The topic subject already describes my situation.
I have to create, populate and remove context nodes at runtime, and bind them to an ALV, to let user display the data or modify the data. The nodes I create are always typed with a table name, but the table name is of course, dynamic.
This is all working: what's not working is help for entries inside the ALV; since the table has foreign keys and domains with check tables or fixed values, I expected that search helps were detected and managed by the framework.
Instead, no help search is displayed except the input help based on data-type of the one "Date" input fields.
I think I have to work on the dynamic node creation, and not on the ALV itself, since the latter only takes the node/attributes information, but i could be wrong. I tried with both the two following codings:
CALL METHOD lo_nd_info_root->add_new_child_node
    EXPORTING
      static_element_type          = vs_tabname
      name                         = 'SAMPLE_NODE_NAME'
*    is_mandatory                 = abap_false
*    is_mandatory_selection       = abap_false
     is_multiple                  = abap_true
     is_multiple_selection        = abap_false
*    is_singleton                 = abap_false
      is_initialize_lead_selection = abap_false
      is_static                    = abap_false
    RECEIVING
      child_node_info              = lo_nd_info_data .
cl_wd_dynamic_tool=>create_nodeinfo_from_struct(
      parent_info = lo_nd_info_root
      node_name = 'SAMPLE_NODE_NAME'
      structure_name = vs_tabname
      is_multiple = abap_true ).
The result is the same...is there any way to let the ALV know what search helps it has to use, and doesn't force me to manually build a VALUE_SET to be bound on the single attributes? There are many tables, with many fields, and maintaining this solution would be very costly.

I have checked with method GET_ATTRIBUTE_VALUEHELP_TYPE of interface IF_WD_CONTEXT_NODE_INFO, on an attribute which i know to have a search help (Foreign key of a check table).
The method returns 'N', that is the constant IF_WD_VALUE_HELP_HANDLER~CO_VH_TYPE_NO_HELP. So, the framework was not able to find a suitable search help.
Using method GET_ATTRIBUTE_VALUE_HELP of the same interface, on the same attribute, returns me '111', which is constant C_VALUE_HELP_MODE-AUTOMATIC.
Therefore, the WD framework knows it has to automatically detect a value help, but fails to find one.
Also, this means in my opinion that the ALV and the dynamic external mapping are not the culprits: since node creation, no help is detected for any attribute but the date. Honestly, I don't have a clue on what's happening.

HELP WITH FASCINATE AND MEDIA MANAGER

Similar Messages

Maybe you are looking for