Help With File Sharing Mac OS / Windows 7

Hello,
I have both operating systems on my network. The only files I can not see are the Mac's. Below are the steps I took to insure the Mac to be seen on the network, but I must be missing somethnig. I only see the printer attached to the Mac.
Workgroup -> Both systems set to the same Workgroup name.
Network -> Both systems on the same network system (both are set to static ip's)
File Sharing -> File sharing on Mac is enabled
SMB and AFB -> Are both enabled
User -> User on the account is enabled for SMB and AFP
Folder and Files -> Are set to the User
I think above is set correctly. Just wondering why in my Windows 7 network screen I just see the printers on the Mac and not all the folders I have set to view?
Thanks JR

Hello
Found the issue. The permissions were set incorrectly on the files and folders.
JR

Similar Messages

  • Help with file sharing

    I am unable to find the "apps" selection under device in itunes (windows) now and thus no longer have access to file sharing . I do have an app on my ipod touch 5 that requires file sharing to copy files from/to. That app is "my disk". I presume that this app is no longer recognized by IOS as a file sharing app. Can you shed any light on this. The App works fine otherwise. can anyone shed light on this?

    Even if you have printer and file sharing enabled, you still might not be able to perform those operations if your firewall is blocking those requests.
    I ran into this exact issue the other day while setting up a wireless for someone. 
    They have Norton Security.  I went in to the firewall and indeed found that file sharing and printer sharing was blocked.  I unblocked it, and everything worked fine.
    Much to my dismay, the Norton Firewall seemed to keep on changing its mind every time I rebooted.  I eventually turned off Norton and turned on the Windows firewall AND ENABLED file and print sharing (it's not enabled by default).
    The person that I have set this up for is happy with that configuration, but I really want to figure out what the deal is with Norton.
    So, bottom line, check your firewall.

  • Two PC's Connected to WRT54G -Need Help With File Sharing Folder

    Hi,
    I have both PC's connected to the WRT54G with internet access on.  How do I create file sharing and or a folder named "shared" on each desktop that allows each PC to drop files in this folder so that each PC can open and access those files?
    Jerry

    For File and Printer Sharing follow this link

  • Need help with File Sharing and iPHOTO Library sharing........

    I recently upgraded my imac and my macbook pro to Mavericks.
    I have some problems now.
    Previously using iPHOTO when running I was able to see the other computers iphoto library on the left side bar.  I was able then to access the other computers iphoto library.  This is no longer showing the other computers library from either computer.
    When I try to access the other computers files using file sharing I get a message that permisions are missing.
    It then asks if I want to fix permisions ,  I say yes....it will run for an hour and do nothing...I need to force quit.
    I really dont want to use the cloud to do this sharing....why should I upload into the internet when I have the computers on same network.
    Is there any place I can go to find how this is now done?  Before I didnt need to look up a thing....was just intuitive .  Now Im running into walls every way I try to share the iphoto libraries across computers.

    The iPhoto sharing that was in the previous version doesn't seem to exist. There is now iCloud Photo Sharing.
    http://support.apple.com/kb/HT5902
    I don't know about the file sharing issue.

  • Help with file uploader, php script, Windows Authentication

    I am trying to setup a really basic web-based file uploader that I will expand upon later. I have the flex application working well enough (very basic). However, I have a php script in a secure folder using windows authentication. When I try to send the file to the script, it doesn't seem to like my credentials, and refuses to do anything. I do not get an error message; just nothing happens.
    My questions are:
    Does anybody know where I should've looked before posting this thread?
    Do I even have PHP set up correctly? (At first I just made a txt file and put a .php extension on it, then I tried to setup PHP on the server, but it was a little confusing for me)
    Is Windows Authentication the problem?
    I do plan on implementing SQL Server in the future (to keep track of Files and user-defined attributes for files), but I do not want to store the files in SQLserver, just their pathnames.
    Is there a simple way to use ColdFusion (for free) to acheive this end?
    I am somewhat experienced at coding applications, but am totally new to server-side scripts.
    This is my php script:
    <?php
    $tempFile = $_FILES['Filedata']['tmp_name'];
    $fileName = $_FILES['Filedata']['name'];
    $fileSize = $_FILES['Filedata']['size'];
    move_uploaded_file($tempFile, "./" . $fileName);
    ?>
    This is my flex application:
    <?xml version="1.0" encoding="utf-8"?>
    <s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
                      xmlns:s="library://ns.adobe.com/flex/spark"
                      xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600">
    <fx:Script>
         <![CDATA[
         private var fileRef:FileReference
         private var uploadFilePath:String
         private function selectFile():void
              fileRef = new FileReference();
              fileRef.addEventListener(Event.SELECT, fileRef_select);
              fileRef.browse();
         private function fileRef_select(evt:Event):void
              fileRef.upload(new URLRequest("http://SERVERLOCATION/PDFUploader.php"));
         ]]>
    </fx:Script>
         <s:Button top="30" left="5" label="Browse" click="selectFile()"/>
    </s:Application>
    Thanks to any who take the time to respond.

    Hey, so far all I have found is this tutorial.. I'm about to try it out
    http://www.smartwebby.com/Flash/external_data.asp

  • Any issues with file sharing between Windows and latest Mac client?

    We're running Lync 2013. My Windows client is 15.0.4551.1005. Mac client is version 14.0.8.
    I open a conversation with a coworker on his Mac. I then try to share a png file. He clicks accept but then my client says the attempt timed out, and his client says that I canceled the file transfer. The coworker then boots the Mac into Windows and we try
    again, and the file share works fine. When I jump on my Mac, I can send files to his Mac without issue. When he tries to send from his Mac to my PC it fails, but when he tries to send from Windows on his Mac to my PC, it works.
    I can't find anything specific in the logs that would indicate a firewall issue. Is there a bug with file sharing between the Mac and PC clients?
    Thanks,
    Matt

    No, There isn't a bug with file sharing between Mac and Pc client.
    2941640 Desktop sharing session stops in Lync 2013 when all screen data is updated
    Also you can check below links
    http://support.microsoft.com/kb/2952672/en-us
    http://support.microsoft.com/kb/2880474/en-gb
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical | Twitter:
    Mai Ali

  • Windows 8.1 ICS with file sharing between computers

    Can someone help me get ICS working with file sharing between two computers (directly connected), without enabling file sharing on the internet network (on a public untrusted network)?  Is this possible?  I have set up ICS between two Windows 8.1
    machines, but i can only get file sharing to work in one direction (from machine B to machine A)... UNLESS I turn on file sharing/discovery with the entire network from machine A (which i do not want to do).  I am not sure this exact question has been
    asked, so my apologies if it has.
    Here is my configuration.
    Machine A: win 8.1 (up to date), two NICs:  a wireless card (connected to internet) and a gigabit NIC (connected to machine B)
    Machine B: win 8.1 (up to date), one NIC, a gigabit card connected to machine A
    What i did:
    On Machine A:  I enabled ICS on machine A's wireless card, which automatically assigned the IP address 192.168.137.1 to the second NIC
    On Machine B:DHCP was enabled so it automatically got an ip address (192.168.137.62), internet sharing works fine (i can open a browser, get email, etc.)
    On Machine B: I enabled "Find devices and content" on the network device
    On Machine A: Going into "view network settings" it lists my wireless network and the gigabit NIC.  The wireless under 'Wi-Fi' says 'Connected', and i can click on this and I have the option to turn on "Find devices and content".
     On the wifi connection, i leave 'Find devices and content' turned OFF (so i don't discover computers on the wireless network, which is a public network).  My gigabit NIC shows up as "unidentified network"/"Limited".
     When i click on the gigabit NIC, it does NOT give me an option to turn on "Find devices and content", it just shows some properties of the NIC (manufacturer, description, driver, mac address) and button that says "Copy".  On
    the gigabit connection's properties (which is listed as "unidentified network/limited"), the option for 'Find devices and content' is missing.
    On Machine A: I open a file browser and type '\\192.168.137.62' and it works correctly, i can see the computer and move files around.
    On Machine B: It doesn't work.  I open a file browser and type in "\\192.168.137.1", and nothing happens.
    If i enable 'Find devices and content' on machine A's wifi connection, everything works, but now everyone on the public network can see my computer.
    Question:  How can i enable file sharing between machine A and machine B ONLY?
    Thanks for any help you can provide.

    The whole point of public networks is that they are unsafe, so file sharing is not permitted for your protection.
      If you have a network which you know is safe, the way to get file sharing working is to change your security policy so that it is set to private, not public. You do this from the local security policy (on the ICS computer).
    Bill

  • Share files between Mac and Windows in same iMac with boot camp

    Hello,
    I am new in using Mac and recently I buy a IMac 24" model.
    I used to use PC a long time with a lot of old document.
    I want to install Windows XP with boot camp.
    But I also want to share my documents, music, video files between Mac and Windows in same iMac.
    How can I do this?
    Thanks in advance,
    Eric

    Hi Eric and welcome to Discussions and the Apple world.
    Mac OSX can read and write from Windows partitions (like the BootCamp Windows partition you are about to create) when using FAT32 as file system for Windows.
    However with FAT32 you are limited to a partition size of 32GB.
    Mac OSX can also read from Windows partitions that uses the NTFS file system, but it can not write to them unless you use a third-party helper like either Paragons NTFS for Mac http://www.paragon-software.com/home/ntfs-mac/ or NTFS-3G http://www.ntfs-3g.org/
    Windows can not even see or use a Mac OSX partition without additional help by MacDrive http://www.mediafour.com/products/macdrive/
    Regards
    Stefan

  • Issues with file sharing after changing password

    Last night I changed my system password on my MacBook Pro and for some reason it caused some issues with my file sharing with my windows PC.
    I was able to finally get the notebook to connect again to the XP PC shared documents by going through finder to go to network and then connected. But the PC would not see the notebook. Everything was communicating fine when I first got the system two weeks ago.
    Tech support did what they could tonight and I finally just decided to set up a connection to my notebook by entering the notebooks ip address on the pc.
    It's alte and sorry for the rambling, but does anyone know why the pc (as well as others in the house) no longer see the notebook?
    Jim

    No, There isn't a bug with file sharing between Mac and Pc client.
    2941640 Desktop sharing session stops in Lync 2013 when all screen data is updated
    Also you can check below links
    http://support.microsoft.com/kb/2952672/en-us
    http://support.microsoft.com/kb/2880474/en-gb
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical | Twitter:
    Mai Ali

  • File sharing problem between Windows 7 & Lion

    I am running a windows 7 laptop and my mac mini with 10.7. 
    I have a single file share setup on the mac which is NTFS based (confirmed permissions are read/write).
    I am unable to connect to the Mac from the windows computer.  When I enter \\192.168.1.102\sharename I am prompt to enter the mac's login account info. When I enter the only account info I have it stays in a loop and I never log in.  It was working fine in Snow Leo.
    Here is what I am also seeing on the File sharing prefs on the mac:
    Even after entering the correct password several times, it still tells me its incorrect.  I have reset the password a couple of times to make sure it wasn't that and rebooted a few times and still the same thing.
    Other things I have tried"
    - Disabled firewall on the Mac
    - Disabled / Enabled File sharing and removing / readding the shares again (rebooting afterwards)
    All didn't make any difference.
    Not sure why it works on Snow and now not on Lion. 
    Please help!
    Thanks,

    I am having the same problem. Have been searching the web for a solution, as well as posting to several Mac forums.
    I found the link shown below which gives a procedure that is supposed to work:
    http://www.trickyways.com/2011/07/file-sharing-mac-os-x-lion-and-pc-windows-7/
    However, it doesn't work for me. When I get to Step #6 and enter my password, I keep getting an "Incorrect Password" notification. Also, when I try to do Step #9, the "Windows Security" window never appears - in fact, nothing at all happens.
    By the way, I am able to see my Windows 7 shared folders on my MBP, but cannot see my MBP shared folders on my Windows 7 system. Worked fine under Snow Leopard.
    I'm bookmarking this forum and will check back if anyone can come up with a solution. I assume this is a bug in Lion and have reported it to Apple.

  • Problems with File Sharing.... prev query unanswered

    Hello everyone,
    I posted this query last month and have yet to solve the problem. I was hoping for some fresh ideas.
    I am running a network on an OS X Server between three labs (around 50 computers connected). One lab has 3 IBMs running with Windows XP that are connected directly to a switch (via cable) and 1 IMac that runs from an airport device (Base).
    The second lab has 3 computers running from the switch, and 3 Macs running from an additional airport baystation (located in that lab).
    The problem I am having deals with file sharing. We have several folders which all users have access to ("public" folders) as well as "user" folders which allow access to the individual users, faculty members, and the admin account.
    All permissions under "server preferences" seem to be defined appropriately.
    Eg) selected "only those registered users" with specified user access indicated.
    Initially after setup, all folder access within the two primary labs appears correct on all computers. However, within a few days, all Macs that run from the Baystation in the second lab no longer show correct folder access.
    No problems occur with the IMac in the first lab.
    Typically only one student folder will appear, and it will not be the correct one. No public folders show up (or rarely do). I had thought it may be a problem with users logging out, so I changed settings to induce an automatic logout after 30min of inactivity. This worked at first, but the problem again started after a few days.
    I have tried many things and this problem still seems to occur within a few days of having fixed it. I am wondering if it may be an issue with the Baystation, though I am not sure how to address this. Any ideas would be much appreciated!!
    Thanks.

    Hi There,
    We have just upgraded all design computers to imac and  upgraded our software to CS5 and we are still having the same problem.
    I  called Adobe at the beginning of the week and they told me to speak to  our IT department as it could be an issue with the preferances on out  network.
    Last time I spoke with IT they told me it was an Adobe issue. I  am still very concerned about it but I have a tiny bit of relief that  someone else is having the same trouble (although very annoying).
    Any ideas on how to fix it? Are you running a windows server?
    Please let me know if you find out any relevant info on this and I will do the same.
    Thanks

  • Where is the File sharing in Itunes window

    Where is the File sharing in Itunes window?

    Normally set in iTunes->Preferences->Sharing. However, with the paucity of details, such as computer, OS,  iTunes version, and what you're trying to do, just a WAG.

  • Install Tiger with file sharing?

    I have an Emac with a cd drive. I realize I can install Tiger via target disk mode with another Mac with dvd capabilities. I can also see how this might be the preferred method.
    Is it acceptable/advisable to install with file sharing?

    Is it acceptable/advisable to install with file sharing?
    Do you mean NetBoot, ARD, or something else?
    http://www.peachpit.com/articles/article.aspx?p=445094
    http://docs.info.apple.com/article.html?artnum=306051
    (Vague reference).
    FWTDM will be fastest, surest, easiest.

  • Problem with File Sharing-Permissions throughout Folders

    I'm having an odd problem when setting up a Mac Pro with File Sharing. I have a second Hard Drive in it which is a Server Drive to be shared as a networked Hard Drive for both my MBP and my Fiancee's MBP. Here is the problem I have.
    I set up File Sharing and set up both her ID and my ID. Since this is done she is able to get to drive from my MBP and she is able to get to the drive from her MBP. I am able to read or write to those folders. She is able to view them but is unable to write to them.
    I went to the Server Drive icon on the Mac Pro's Desktop. When I right click and do "Get Info" and select Sharing I can tell her ID is not listed on any of the Folders. She is listed as Read and Write for the entire Hard Drive (which is an internal drive). I am also listed as Read and WRite and then it lists Everyone and says No Access. The same is listed in System Preferences in File Sharing. I have heard this Everyone 'No Access' can cause problems but I prefer not to give access to everyone. The only other option is Read Only and Read and Write. Also, when I have Everyone selected the - sign is greyed out so I'm unable to remove Everyone.
    To continue, what is strange is I thought with it saying on the Server Drive itself for my Fiancee, read & write, that it would say this on every Folder inside. Yet when I select any Folder inside on the Server Drive and select Get Info it says for me "Read & Write" and for Staff "Read Only" and for Everyone "Read only" I'm not even sure where Staff comes fro and of course Everyone is Read Only and my Fiancee not even listed. It just seems that these file sharing permissions are not replicated througout all the Folders when I select it for the Hard Drive itself. What could be causing this and how can I get the same to go throughout the Folders? I know manually I could change them all but this would take a long time and likely still be a problem when any additional Folders are added.

    1. I have turned logged into it from my MBP while at Home and if I'm logged in as Guest I only see the Server Drive which is good. My concern is that if I log in with my login I then sell all Folders including the Main 'Macintosh HD' At least as a guest I can only see the Server Drive but is it any way I can stop it from showing all the other folders on the computer since I have no reason to do that?
    When you login to a mac as an administrator it is normal to see all the contents of the volumes connected to that mac.
    2. Also, I would like to disable all access for Guest. Yet I have it list Everyone or Guest in the file sharing and I have no way of deleting this. I don't want a Guest to be able to connect to this computer or share any files at all on it. Is there any way to disable this?
    Goto system preferernces-->accounts
    click on the lock to and enter your password to unlock the preference pane.
    Then select the guest account. Then uncheck the 2 check boxes. The account should now have 'disabled' underneath it.
    3. Security: How secure is this? I am using it on a Home Wi-Fi network with an Airport Base Station 1GB. I have the Leopard filewall set to "Set Access for Specific Services" since it won't work with "Allow only essential services" I hope my home network is more security but with Back to my Mac how hard would it be for someone to be able to find this computer on the network? I don't do any filesharing on my MBP but do have it set up for File Sharing but only with my login ID.
    If you have your base station set to distribute ip addresses then it is acting as a NAT router and will firewall you.
    I have not setup back to my mac yet so can't comment on its security. Although I would suggest a strong password.
    have a read of Mac OS X 10.5: About Back to My Mac security
    My method of remote access is to use SSH and run screen sharing over an SSH tunnel.

  • Share files between Mac and Windows sessions.

    Hello,
    I've a business(sales) software(Ciel) which is working on Mac. This software is generating a file which can be exported to another (Ciel) software(accounting) but which only works on Windows. I've made 2 sessions for both operating systems, split hard disk in 2 partitions and installed the both software separately.
    How can I let the windows partition being accessible to writing mode from mac session in order to export the file from mac to windows?
    Thank's in advance.

    You may want to investigate Parallels for Mac. It will allow you to share everything in your Mac with Windows.
    http://www.parallelsstore.com/parallels-desktop-for-mac.html

Maybe you are looking for