Help with firmware installing over and over

i did the firmware update to 1.9 and now when i restart my computer or shut it down it reinstalls the firmware over and over and the system takes over 5mins to start up ..it has the apple logo and the lil round dot bars going and under that is this long progress bar like it's installing firmware. it dose this over and over and having to wait for over 5mins is way to long ...thx for any help

It sounds like something in your firmware update may have become corrupted during the download, my recommendation would be re-download it and then re-install. This is assuming you have a mid 2010 15 or 17" MBP. If you don't have one of these machines you should haven't downloaded the update and that could be the reason for the issue. If you don't have a mid 2010 15 or 17" MBP or the re-download/re-installation fails take your MBP into an Apple Store or AASP and they can help you.
You can locate the update at:
http://support.apple.com/kb/DL1098
Regards,
Roger

Similar Messages

New help with my mac air and airport extreme time capsule dont know how to save to time capsule and use as a external hd

new help with my mac air and airport extreme time capsule dont know how to save to time capsule and use as a external hd would like 2 store my home videos and pictures on the time machine (ONLY) as the MAC AIR has storage space limited space please help. THANK YOU.

See the info here about sharing or using the TC for data.
Q3 http://pondini.org/TM/Time_Capsule.html
It is extremely important you realise.. the Time Capsule was never designed for this.
It is a backup target for Time Machine.. that is the software on the computer that does backups.. it has no direct connection to the Time Capsule.
It has no ability to back itself up.. unlike all other NAS in the market. It is therefore likely one day you will lose all your files unless you seriously work out how to backup.
The TC is slow to spin up the hard disk and fast to spin down. iTunes and iPhoto will continually lose connection to their respective libraries.
iPhoto in particular is easy to corrupt when you move photos over wireless into the library.. once corrupted all is corrupt. A single photo will ruin it all.. so backup is utterly essential.
Time Machine cannot do backups of network drives. ie the TC. You will need a different backup software like CCC. You will then need another target to backup to..

I need help with re installing my apple account for itunes.

Had problems with my itune account, so I uninstalled and now need help with re-installing the program with the songs I have already purchased.

Your iTunes account is something at the iTunes Store online. It is not possible to uninstall it. Do you mean the iTunes application? Even if you delete the application and restore it, it should not have deleted your iTunes library (essentially the contents of the iTunes folder in Music) on your computer unless you did a separate steep and specifically deleted that too. You need to tell us what it was you deleted.

Help with opening Adobe Reader and downloading updates

I can not open Adobe .pdf files any longer (this started yesterday, prior to that I could open adobe files).
When I double click a .pdf file I get this notice on my screen: Windows cannot access the specified device path or file. You may not have the appropriate permission to access file.
So I went to the Adobe download site to download a new copy of Adobe. When I start the download I get this on the screen: The instruction at "0x0e3a0068" referenced memory at "0x0e3a0068." The memory could not be written. Then two options are listed: click OK to terminate or cancel to debug. So I click on cancel and I get this on my screen: Internet Explorer has closed this webpage to help protect your computer. A malfunctioning or malicious addon has caused I.E. to close this webpage.
I don't have AVG running, I do have avast but I've disabled it. I ran Registry Mechanic and an I.E. erasure program but nothing helps.
I have gone into I.E. and reduced the security level to its lowest state but no joy.
So, any ideas or suggestions on what's the problem and how to overcome it would be appreciated. Thanks, in advance, for your reply. Jim R.

Hi Mike..tried that as well but no joy. A friend of mine was looking at it all and noticed that it was an I.E. thing as far as not letting me redownload the reader so I went to Mozilla Firefox and I could download a new version but....whenever I attempt to open a .pdf file I get that message, "Windows can not open the specified device, path or file. You man not have the appropriate permissions to access the item."
Damn...this is irritating as I need to get to some of thos files as I need them for a Journal I'm working on as editor-in-chief.
It all worked just fine last Saturday but starting Monday when I was on my flight out to D.C. no joy.
Sigh...Jim R.
Jim R.
Date: Tue, 1 Dec 2009 14:50:27 -0700
From: [email protected]
To: [email protected]
Subject: Help with opening Adobe Reader and downloading updates
Under the help menu, there is an option to repair the installation of reader. Did you try that?
>

Need help with my iPhone 5 and my Macbook Pro.

Need help with my iPhone 5 and my Macbook Pro. I was purchased some music on itunes at my mac. Some reason I deleted those music from both on Mac and iPhone 5. Today, I went to my iPhone iTunes store inside of iCloud to redownload my puchased. But those song won't able to sync back to my iTunes library on my Mac. Can anyone help me with that ??....
iPhone 5, iOS 6.0.1

You've posted to the iTunes Match forum, which your question does not appear to be related to. You'll get better support responses by posting to either the iTunes for Mac or iTunes for Windows forum. Which ever is more appropriate for your situation.

Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?

Seeking help with PS Elements 11 which does not work with Epson r2000 printer. Epson tech support could not fix, said it is PS e11 problem. Receive prompt on PS e11 screen when I try to print stating "not compatible or settings are not correct. Have set PS to manage color and printer manages color to off. Would appreciate any suggestions. Thank you.

Hi,
Sincerely appreciate your help. Running Windows 7 on a Dell XPS420. System has been very stable for years. Before purchasing the Epson r2000, I owned an r1800 which was an excellent printer but after seven years started to exhibit paper feed problems. The r1800 worked with all applications and I was well satisfied with the saturation, contrast, etc. printing mostly 8x10 and 11x17 prints.
Thank you for the information about the # of installs for PS E11, will try uninstall/reinstall this morning.
Will let you know how things go.
Richard
Date: Thu, 12 Sep 2013 19:47:38 -0700
From: [email protected]
To: [email protected]
Subject: Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?
    Re: Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?
    created by Barbara B. in Photoshop Elements - View the full discussion
What operating system are you using?
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5678022#5678022
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5678022#5678022
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5678022#5678022. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

When booting up I cannot get past the light blue logo with spinning disc. I have tried it with the install disc and using different keystrokes, i.e. "shift, s, c, o, " please advise. thank you in advance.

When booting up I cannot get past the light blue logo with spinning disc. I have tried it with the install disc and using different keystrokes, i.e. "shift, s, c, o, " please advise. thank you in advance.

The system on the original install dic is probably looking for the original video card.
It may be possible for someone with the right skills to make an install disc for you with the driver for your new card.
As I recall from my early days of being a Macuser, If you held down a key, (spacebar?), while starting it would open a dialog to take you through a monitor setup.

Tips and help with re-installing Lion over Snow Leopard

I had MAJOR issues with my initial Lion install on my Mid-2009 MBP- so much so, that I had to wipe my hard drive and re-install Snow Leopard and all my applications. My major issues were as follows:
1. All my files were locked out- I could open them in most cases, but I couldn't overwrite them- Lion had aded some funky permissions scheme that I didn't recognize, and my user name wasn't present on any of them. In some cases, I couldn't even open files, even though they were resident on my hard drive (and in my own user folder) before the upgrade to Lion.
2. Apple's own Universal Binary apps wouldn't work after the upgrade. Final Cut Pro 6, in particular, came up with a message that it was a "PowerPC" app and wouldn't run- yet Shake 4.1 would run just fine!
3. Adobe Creative Suite 3- after the upgrade, my Abode Ceative Suite 3 apps worked just fine, for about a day- that is, until I tried to correct the file permissions issue by changing permission on a few of my folders in my User folder (and electing to change permissions in the files contained therein)- at which point my Adobe apps told me that they were damaged and needed to be reinstalled. Yet after uninstaling and reinstalling the entire Creative Suite 3 times, I still would get the same message.
My entire workflow is Adobe CS and FCS2- why chould I have to pay the upgrade costs just to use Lion? FCPX is completely brkoen for my workflow and eqipment, and Adobe can't even guarantee that CS5 works with Lion- so why does Apple insist on Lion when it's hardly even compatible with its own products?
I really want to use Lion, but I am looking for some tips on instalation to kep these problems from happening again. I didn' have ANY of these problems with upgrading OS 10.2 through 10.6. Any help with prepping my system/files for upgrading would be helpful. Thanks!

any new Apple kB articles
http://support.apple.com/kb/index?page=articles
Me, I think clone backups are more useful, and only use T.M. as secondary.
Using Cloning as a Backup Strategy
I'd assume that professional apps may need to be tested still; and of course check to see what you have that depends on PowerPC code and Rosetta first. That has some in a tither.
A clone lets you still be able to boot Snow Leopard. Check out Carbon Copy, SuperDuper.

Help with Tiger install and getting hot keys and start up manager to work

this open firmware issue, how do you get around it? Wonder if it is causing me trouble; i.e. shift and other keys do not work and keeping me from booting with Tiger install. How do I access these keys then?
I did a clean install on a secondary internal drive (device 1) 150GB Maxtor
but it won't boot and "restart" brings me back to install process...
have repaired disk -- OK -- repaired permissions -- OK. Re-installed and repaired. Peripherals are off or disconnected. Current OS is 10.3.9 on 20 GB HD (device 0)
What now? Would appreciate some guidance. Thank you.
Ali
This is my CPU
Build 7W98
Machine Model: Power Mac G4 (AGP graphics)
CPU Type: PowerPC G4 (2.8)
Number Of CPUs: 1
CPU Speed: 450 MHz
L2 Cache (per CPU): 1 MB
Memory: 2 GB
Bus Speed: 100 MHz
Boot ROM Version: 4.2.8f1
Serial Number:

Hi Ali,
re: this open firmware issue, how do you get around it? I really did not understand the support page you link to...but wonder if it is causing me trouble; i.e. shift and other keys do not work. How do I access these keys then?
Is this a Wireless KB you have? Many aren't recognized until after booting.
Hmmm, you've got the firmware Update needed for the AGP to install/use 10.4...
I think I'd try this, worked for me on 3 such macs...
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the Erase tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume, then choose MacOS Extended Journalled, select the Partition tab.
6. Click Erase & look for Security Options. choose Zero 1 pass."
Formatting & Partitioning a Hard Drive in OS X - Tiger and Leopard...
http://www.kenstone.net/fcphomepage/partitioningtiger.html
Hopefully then a fresh install will work.
Oh, what are the Jumper settings on hat drive? Apple recommends Cable Select, but I find different settings work with a dizzying variety of Drive combos.

Help with uninstalling Elements 10 and installing Lightroom 4

Help - trying to install Lightroom 4 but I need to also uninstall Elements 10 - it wont let me do it - keeps saying that it is installing something else - Error 1500.

restart you computer.
deactivate elements 10 (help>deactivate) and then uninstall it.
then restart your computer and install lr 4.

Help with new hard drive and data recovery

I have a macbook pro 13" from early 2011...last week the hard drive crashed and after a few hours at the genius bar had to got tekserv to recover my data and get a new hard drive and update to 8GB of Ram. When I got my macbook back I was given an external hard drive that had everything from my old hard drive saved by the users on the old hard drive. I was hoping I could just transfer the user over to the new hard drive but since I had to restart the computer as a new computer I am not able to just reassign my old profile as the new one on this laptop. Maybe I've done something wrong but at this point I transferred all my documents over, moved my music and pictures over but I have a few things I can't figure out that I'm hoping someone can help with.
1. Do emails that were in my mail program from both gmail and my verizon.net program get saved somewhere or do I have to just assume those were lost?
2. my iTunes library is now there but none of my playlists are there. Should those have been saved somewhere in my iTunes folder that I should see them? I'm concerned about syncing my iPhone or iPads to iTunes without those there.
thanks for the help.

Here's the spec page on your PB. http://www.everymac.com/systems/apple/powerbook_g4/stats/powerbook_g4_1.25_15.ht ml It came with OS 10.2.7 installed. The max OS is Leopard 10.5.x
Tiger install DVDs are in short supply. Tiger is no longer available at the Apple Store but may be available for $129 by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753). For other sources, do a Google search for MA453Z/A (10.4.6), MA190Z/A (10.4.3) and M9639Z/A (10.4). Also look on eBay. Be sure & buy a retail version (black with silver X) and not a model specific version (gray) (See http://discussions.apple.com/thread.jspa?threadID=1976068 Can I use another Mac's system restore disc on my Mac?.
Also check these web stores: http://www.lacomputercompany.com/cgi-bin/rpcart/index.cgi?command=dispitem&type= sku&sku=19521 http://www.allmac.com/shop/index.php?cPath=5_10003
After you install the base 10.4.x, update to the final Tiger version 10.4.11. Here's the link for the 10.4.11 combo update http://support.apple.com/kb/TA24901?viewlocale=en_US
Look at this link Mac OS X v10.4 Tiger Installing Software Support Page
http://www.apple.com/support/tiger/install/
You can also download the Tiger Installation and Setup Guide
http://manuals.info.apple.com/en/Tiger_Install_Setup_Guide.pdf
 Cheers, Tom

Need Help with External Hard drives and too much music

I am not terribly tech-savvy, and I need your help. I have a G5 PPC dual processor with an internal 250GB drive. I have two seagate firewire/USB2 external hard drives. One is 250GB and one is 350GB. I want to know how to use them to get my Mac to run faster and better.
My original hard drive is 7GB shy of being full. Almost half of this is my itunes library which is over 100GB. The older (250GB) hard drive has about 150GB of photos/videos.
My Mac is running slow as molasses and when I power up the external hard drives it slows down to what I recall my original Mac Plus ran like.
I use the G5 primarily to work with photos, illustrations and creating the occasional DVD with video and photos. the apps I use most often are Photoshop, Illustrator and Painter. I always listen to music while work.
I hope all of this information is helpful! Here is my question:
What is the best way for me to set up and use these external hard drives to return my G5 to its original blazing (to me) fast speed?
PPC G5 Mac OS X (10.4.9)

I think you should look at adding two 500GB internal drives. I'd say Maxtor MaxLine Pro for cost, but they also run much warmer (43ºC even when nearly doing zilch) so I'd go with WD RE2 500GB for $40 ea. more.
dump whatever you don't need, trash anything that is hogging space and is just temp file or useless cache. Web browsers can leave behind a ton of small files eating up tens of MBs.
Use SuperDuper to backup/clone your drive.
Disk Warrior 4 to repair (after it gets to 15% free, or just forget for now).
A 250GB drive formats to 240GB and you have ~3% free it looks like.
For every data drive plan to have two backup drives.
Keep your boot drive to 40% used.
And your data drive to 60%.
Backups can go a little higher.
Drives are cheap and inexpensive, especially for the space and performance. And they have improved SATA over the years it has been out.
By doing a backup followed by erasing your drive, and then restoring it, using SuperDuper, which optimizes the organization, skips copying temp files that aren't needed, it also defragments your files. I would do backup daily to different sets that you "rotate." And before any OS update. And do the erase and restore probably every 2 months.
Make sure you keep one drive partition somewhere that is just your disk utility emergency boot drive that is not a copy of working system, used for doing repairs like running Disk Warrior and Disk Utility.
You may need to repair; backup; even erase and restore your external drives. Rather than spend on vendor made case, just pick up a good FireWire case either with drive, or bare (and add your own). I think it'd add 500GB FW drive though.
Why?
To begin backup of your current drive. To leave your other FW drives "as is" for now.
Then install a new internal 500GB drive as well so you now have a good current backup, and you have moved your data off 250GB to 500GB. If anything happens, you have one off line FW backup.
Then begin to clean up, organize, and get your FW drives working. It sure sounds like they have had some directory or file problems.
You can find a lot of Firewire and SATA drive choices over at OWC:
http://www.macsales.com/firewire/

I need help with my Iphone, Itunes, and new SSD and other SATA harddrive where old Itunes files are kept. I cannot sync up new albums I ripped to itunes.

I recently bought a new SSD and installed windows and all major files to it including Itunes. My old 500GB SATA harddrive is still connected and accessible to Itunes, but I cannot get any new album I download to Itunes to sync up with my 64 GB Iphone 5.
Please help me as I am going raving mad over this.
P

Follow the directions here:
https://discussions.apple.com/docs/DOC-3141

Please help with new install

Superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem and not SWAP or UFS or something else, then the superblock is corrupt and you might try running e2sck with and alternate superblock: e2sck -b 8193 <device>
I get this error after a new install and reboot, any idea what this mean and how to fix it.
Appreciate all the help.
This is a AMD 1.8mgz and 1 gig of ram on Asus mb.

I just downloaded the image archlinux 2009.02 core i686 and was able to install with no issues. I was able to reboot successfully. It appears to be an issue with the newest installer specificly. turtle, try the old installer and see if you can't get things working. This should work for the OP too.
I got it to boot after an install for the first time using this older install image.
I wasted 8 freaking hours trying to figure out the problem and the answer is as simple as use the older installer. Shesh.
I was wrong. I installed once successfully in one of the computers on an 80 gb hard drive. When trying to reinstall on two different 120 gig hard drives the error repeated itself. I'm spent on this. I'm going to have to try another distro.
After two more installs I can get it to load but I'm now having a superblock last load time is in the future error.
Used fsck on all my partitions to fix the problem and now I have a successfully booting arch system. Guess I won't have to jump ship just yet.
------update, maybe this will help somebody----------
I'm not sure why but the partitions on my first disk are all referred to as sda and not hda even though all my hard drives are IDE (via command 'df', fstab has them listed by UID).
Even weirder, when I installed a new hard drive into the machine, I had to format it and mount it by referring to /dev/sdb and not /dev/hdb like I expected. This is odd as I don't even have any sata connections in my machine. Could someone tell me why this is happening. Is it a 'feature' or a 'bug' of arch?
lldmer, I wish I had listened to you when I was trying to install over and over the day before yesterday. Looks like you hit the nail on the head on this one. I wish I had tried what you suggested. The weird thing is that when I was originally having problems, the fstab did have the drives listed by UID. I wonder if changing those UID entries to /dev/sda style entries would have fixed my problems.
If I install arch again, I'll have to try that.
Last edited by bodyhead (2009-10-26 14:55:14)

Help with firmware installation

Hello
I recently did the upgrade to install firmware but didn't realize the screen would go black and there would be a whirring sound. I got frantic and reboot and restarted many times, but the machine still won't turn on. It's still a blank screen with a whirring sound, does this mean the uprade is still working? Please help, thanks.

This is more for others than for you, but you should only interrupt firmware upgrades as a last resort. I'd wait 24 hours after my computer started behaving strangely during one before I'd even think about interrupting. Even then, I'd try to have an expert come to my place to look at the problem before I'd turn the machine off (reboot or restart).
Others here may know more than I, but I'd take it to an Apple Authorized Service location and see if they can help. Computer maker know that the firmware is critical and do everything they can to make it hard to mess up. Chances are an expert can help you.

Help with firmware installing over and over

Similar Messages

Maybe you are looking for