Help with formats and loading videos on to the Zen Vision M 30
Recently I purchased a my Vision M. I've not had much trouble installing videos or music. Then the other day, I began to have problems. Can anyone tell me exaclty which formats are supported and why the ones that show as supported will not transfer? aiv won't transfer, wmv, mpeg wo't either.All the videos I've transfered are now in wmv format. Lately all the videos I try to transfer will not transfer. I get the message that the conversion was unseccessful but I have no idea why or how to fix it. I've downloaded the newest firmware.
Thread closed. DVD ripping is illegal in some countries and a grey area in others. We cannot allow discussion on this topic.
Daniel
Similar Messages
-
Need help with format and reinstall of leopard
hey guys. I am having major problems with my MacBook. I have been using it for over a year with no problems, however last night it crashed big time. Data loss isnt an issue, as I did a full backup the night before. I need to know if it possible to format the hard drive through the terminal. I have been trying to do so with no luck as the drive continually gives me the error "resource busy." it does this in terminal, single-user mode and disk utility off of the DVD. I am pretty savvy with all but the most complicated terminal work. How do you check running processes and end them through the terminal? I think if I can fix that, I might be able to format the drive. Its havng b tree and leaf errors through fsck. It may need to be replaced. Let me know what is this best way to format the drive and get it back to a blank slate through the terminal and fix the resource busy problems.
If you boot the "offending" Mac as a FW target disk, there should be no permissions issues on that drive. Permissions are controlled by the OS which will not be loaded when the computer is booted into target disk mode. If the target disk is connected to a running Mac, you should be able to treat the drive just like any other external FW drive. At that point, you should be able to delete any existing partitions on the drive, create (a) new one(s) and "zero out" the drive. There is an "Ignore permissions on this drive" option that should be selected. I can't imagine any logical reason that you could not reformat the drive in this manner.
-
Help with formats and rendering.
I am new to final cut pro, so am still getting the hang of everything. Whenever I put my files into the timeline they need to be rendered before I can play them, same thing when I make a small change with a clip, this means I am only editing about half the time, and the other half I'm waiting for my files to render. I tried to set up Easy Setup but wasn't sure of the format. All my video files end in .m4v. I also was thinking about getting more RAM to help speed up the rendering proccess and let me use the multiclip editing (which only plays frame-by-frame or crashes the program currently), does anyone know if that would help? I'm using a 15 inch MacBook Pro with 2.4 GHz Intel Core Duo 2, 2GB of RAM, and 52.91 GB available on the hard drive. Thanks!
It sounds like it's just the standard pixelization when the action is too fast for the bit rate. I don't know how you created the DVD, but you need to increase the bit rate of the video.
If you did it in iDVD, I think the only way to do that is to go into the Project Info and set the encoding to Professional Quality. That's iDVD-speak for two-pass variable bit rate which will always be the best quality. It will take longer to encode, and it won't encode in the background, but it's worth it. Depending on your video, it will also let you fit a longer movie on one disc without a DL disc.
If you're using iDVD, once you get a creation you're happy with, be sure to do File Menu---Save As Disc Image... instead of just burning a DVD. The resulting file will let you burn multiple copies quickly (using Disk Utility) instead of re-encoding every copy. -
Help with authoring and posting Quicktime movies on the web
Greetings all,
I recently launched a new website (www.articles-of-war.com) with a 'movie trailer' page (http://www.articles-of-war.com/pages/down_trai.html) similiar to the movie trailer pages on the Apple site.
The page has links to Quicktime movies of different sizes (small, medium, high, HD, etc). When I click any movie, though, it takes a long time for them to appear before they can play (the blue Quickime "Q" logo appears as the entire movie loads, for example), rather than playing almost immediately.
When I built the trailer pages, I made sure to set "autoplay" to "true."
When I authored the Quicktime movies, I used these settings:
H.264
Prepare For Internet Streaming (Fast Start)
Data Rate: Automatic
I'm sure I'm skipping some simple step to make these movies play right away - is there anyone that can offer some advice?You lost the "fast start" feature when you added the annotations and then used a regular "Save".
Use "Save As" (QuickTime Pro) to restore the fast start feature and upload those new files again.
You should also consider a more modern audio codec than IMA 4:1 to reduce the size of your audio track. -
Hi I am using oracle 10g. Trying to aggregate duplicate count records. I have so far:
SELECT 'ST' LEDGER,
CASE
WHEN c.Category = 'E' THEN 'Headcount Exempt'
ELSE 'Headcount Non-Exempt'
END
ACCOUNTS,
CASE WHEN a.COMPANY = 'ZEE' THEN 'OH' ELSE 'NA' END MARKET,
'MARCH_12' AS PERIOD,
COUNT (a.empl_id) head_count
FROM essbase.employee_pubinfo a
LEFT OUTER JOIN MMS_DIST_COPY b
ON a.cost_ctr = TRIM (b.bu)
INNER JOIN MMS_GL_PAY_GROUPS c
ON a.pay_group = c.group_code
WHERE a.employee_status IN ('A', 'L', 'P', 'S')
AND FISCAL_YEAR = '2012'
AND FISCAL_MONTH = 'MARCH'
GROUP BY a.company,
b.district,
a.cost_ctr,
c.category,
a.fiscal_month,
a.fiscal_year;
which gives me same rows with different head_counts. I am trying to combine the same rows as a total (one record). Do I use a subquery?Hi,
Whenever you have a problem, please post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) from all tables involved.
Also post the results you want from that data, and an explanation of how you get those results from that data, with specific examples.
user610131 wrote:
... which gives me same rows with different head_counts.If they have different head_counts, then the rows are not the same.
I am trying to combine the same rows as a total (one record). Do I use a subquery?Maybe. It's more likely that you need a different GROUP BY clause, since the GROUP BY clause determines how many rows of output there will be. I'll be able to say more after you post the sample data, results, and explanation.
You may want both a sub-query and a different GROUP BY clause. For example:
WITH got_group_by_columns AS
SELECT a.empl_id
, CASE
WHEN c.category = 'E'
THEN 'Headcount Exempt'
ELSE 'Headcount Non-Exempt'
END AS accounts
, CASE
WHEN a.company = 'ZEE'
THEN 'OH'
ELSE 'NA'
END AS market
FROM essbase.employee_pubinfo a
LEFT OUTER JOIN mms_dist_copy b ON a.cost_ctr = TRIM (b.bu)
INNER JOIN mms_gl_pay_groups c ON a.pay_group = c.group_code
WHERE a.employee_status IN ('A', 'L', 'P', 'S')
AND fiscal_year = '2012'
AND fiscal_month = 'MARCH'
SELECT 'ST' AS ledger
, accounts
, market
, 'MARCH_12' AS period
, COUNT (empl_id) AS head_count
FROM got_group_by_columns
GROUP BY accounts
, market
;But that's just a wild guess.
You said you wanted "Help with count and sum". I see the COUNT, but what do you want with SUM? No doubt this will be clearer after you post the sample data and results.
Edited by: Frank Kulash on Apr 4, 2012 5:31 PM -
I am having problems loading sampler patches into the exs24 sampler, when i got into edit menu and load multiple samples all the samples r greyed out and i cannot slect them, any help with this would be much appreciated
It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
How large is your hard drive and how much hard drive space do you have left? -
Problem with youtube and other video websites
I have a problem with youtube and other video websites:
Everything is up to date (flash, FF, my plug ins..) but i keep getting freezes when the video loads. I can hear sound but i can only see the first frame of the video.
I've reinstalled flash/firefox or tried updating them again for about 4 times now and my cookies/cache has also been errased which i usually don't do. If i enter FF's safe mode it also freezes.
I hope someone could help out, i've searched for answer on google before and tried everything i saw but it didn't helped.
grts,
agrashHmm, so that person had a conflicting plug in.
Problem is that whenever i enter firefoxes safe mode which disables every plug in, i still have the youtube freeze/crash -
Help with writing and retrieving data from a table field with type "LCHR"
Hi Experts,
I need help with writing and reading data from a database table field which has a type of "LCHR". I have given an example of the original code but don't know what to change it to in order to fix it and still read in the original data that's stored in the LCHR field.
Basically we have two Function modules, one that saves list data to a database table and one that reads in this data. Both Function modules have an identicle table which has an array of fields from type INT4, CHAR, and type P. The INT4 field is the first one.
Incidentally this worked in the 4.7 non-unicode system but is now dumping in the new ECC6 Unicode system.
Thanks in advance,
C
SAVING THE LIST DATA TO DB
DATA: L_WA(800).
LOOP AT T_TAB into L_WA.
ZDBTAB-DATALEN = STRLEN( L_WA ).
MOVE: L_WA to ZDBTAB-RAWDATA.
ZDBTAB-LINENUM = SY-TABIX.
INSERT ZDBTAB.
READING THE DATA FROM DB
DATA: BEGIN OF T_DATA,
SEQNR type ZDBTAB-LINENUM,
DATA type ZDBTAB-RAWDATA,
END OF T_TAB.
Select the data.
SELECT linenum rawdata from ZDBTAB into table T_DATA
WHERE repid = w_repname
AND rundate = w_rundate
ORDER BY linenum.
Populate calling Internal Table.
LOOP AT T-DATA.
APPEND T_DATA to T_TAB.
ENDLOOP.Hi Anuj,
The unicode flag is active.
When I run our report and then to try and save the list data a dump is happening at the following point
LOOP AT T_TAB into L_WA.
As I say, T_TAB consists of different fields and field types whereas L_WA is CHAR 800. The dump mentions UC_OBJECTS_NOT_CONVERTIBLE
When I try to load a saved list the dump is happening at the following point
APPEND T_DATA-RAWDATA to T_TAB.
T_DATA-RAWDATA is type LCHR and T_TAB consists of different fields and field types.
In both examples the dumps mention UC_OBJECTS_NOT_CONVERTIBLE
Regards
C -
Help with treemap and other stuff
hi guys..
i m new to this forum..
and this is my first post....so if i act a little naive .....please bare with me.
and if this is not the correct place to post ..i m sorry for that.
i have an assignment to submit....i m getting the whole picture ....but not sure how to go about implementing it.
here it is...
Write an Object Oriented solution to the problem in Java. The solution is to consist of:
A TableIndex class
A TableNavigator Interface
A data row class ....class that i have to create.
An application class to use and test your TableIndex class
The following UML class diagrams show the public methods of the classes. Other methods may be specified. Specify data members, inner classes and interfaces as appropriate.
TableIndex Class
The TableIndex class is an index to a collection of objects. The class is to approximate an index to a data table in memory that consists of a number of rows. To control access to the index a current row is defined that specifies the row that can be accessed. To retrieve a row from the index it must be the current row. The get() method is the only method in TableIndex class that retrieves a row from the index. The current row can be changed explicitly using the methods: previous(), next(), first(), last(), gotoBookmark and find(K); and implicitly using insert(K, V), modify(K, V) and remove().
The TableIndex class is to be implemented using the java API's TreeMap class and must use Generics. The data types K and V below are generic types for the Key and Value (row) respectively. An important aspect of the assignment is using the Java API documentation to understand the TreeMap class.
guys ....can u plz help with the starting bit ..
what should be the opening statement of the class...
public class TableIndex<K , V> .....????
and what should be the treemap declaration..??
TreeMap<K , V> indexTable = new TreeMap<K , V>();...???
i m confused....
can u plz explain to me..hi mate.....didnt quite get you..
can u plz be a bit more simple in explanation..!!!
i will post the whole question ..so that anyone reading will understand better....
Problem Description
You are to develop an index class and associated classes.
Requirements
Write an Object Oriented solution to the problem in Java. The solution is to consist of:
A TableIndex class
A TableNavigator Interface
A data row class
An application class to use and test your TableIndex class
The following UML class diagrams show the public methods of the classes. Other methods may be specified. Specify data members, inner classes and interfaces as appropriate.
TableIndex Class
The TableIndex class is an index to a collection of objects. The class is to approximate an index to a data table in memory that consists of a number of rows. To control access to the index a current row is defined that specifies the row that can be accessed. To retrieve a row from the index it must be the current row. The get() method is the only method in TableIndex class that retrieves a row from the index. The current row can be changed explicitly using the methods: previous(), next(), first(), last(), gotoBookmark and find(K); and implicitly using insert(K, V), modify(K, V) and remove().
The TableIndex class is to be implemented using the java API's TreeMap class and must use Generics. The data types K and V below are generic types for the Key and Value (row) respectively. An important aspect of the assignment is using the Java API documentation to understand the TreeMap class.
TableIndex
+TableIndex()
+TableIndex(name: String, comp: Comparator)
+getName(): String
+isEmpty(): Boolean
+size(): Integer
+hasPrevious(): Boolean
+hasNext(): Boolean
+previous()
+next()
+first()
+last()
+setBookmark(): Boolean
+clearBookmark()
+gotoBookmark(): Boolean
+contains(key: K): Boolean
+find(key: K): Boolean
+get(): V
+insert(key:K, value: V): Boolean
+modify(value: V): Boolean
+modify(key: K, value: V): Boolean
+remove(): V
+iterator(): Iterator
+equals(obj2: Object): Boolean
+toString(): String
Additional Notes:
The table index has an order defined by the compareTo method of the key's class or by the compare method specified in the class that implements the Comparator interface.
getName(): the name of the index, blank by default.
isEmpty(): returns true if there aren't any rows in the table index
size(): returns the number of rows in the table index
hasPrevious(): returns true if there is a row before the current row.
hasNext(): returns true if there is a row after the current row in sequence.
previous(): if there is a row before the current row, move to the row and make it the new current row.
next() if there is a row after the current row, move to the row and make it the new current row.
first(): if the table isn't empty, move to the first row and make it the new current row.
last(): if the table isn't empty, move to the last row and make it the new current row.
setBookmark(): sets a bookmark at the current row. If the bookmark is successfully set the method returns true. The bookmark is cleared if the TableIndex is empty or the row the bookmark was set on is deleted..
clearBookmark(): sets the bookmark to null, indicating there isn't a bookmark.
gotoBookmark(): if a bookmark has been set, go to the bookmarked row. If successful the book marked row becomes the current row and the method returns true.
contains(K): return true if a row with the key specified exists.
find(K): if a row is found with the specified key, the current row is set to the row found.
get(): returns the current row. Null is returned if there isn't a current row.
insert(K, V): inserts a row (value) with the key specified. The key must not be null and must be unique (not already in the TableIndex). The row (value) must not be null. If the row is successfully inserted true is returned, and the row becomes the current row..
modify(V): change the current row's data to the row (value) specified. The key and the current row key are to remain the same. If successful true is returned.
modify(K, V): change the current row's key and data to the key and row (value) specified. If successful the changed row becomes the new current row. If successful true is returned. Note: this is more difficult than modify(V).
remove(): remove the current row. When a row is deleted the next row (if available) becomes the current row, otherwise if there isn't a next row the previous row becomes the current row, otherwise the table is empty therefore the current row is null.
iterator(): returns an iterator to the rows (values) in the index. The rows are to be retrieved in order. The remove method does not need to be implemented (its method body can be empty)..
the equals method uses the name, and the rows (values) in order when testing for equality.
the toString method should return appropriately formatted data members and the rows (values/data) in the index.
TableNavigator Interface
«interface»
TableNavigator
+isEmpty(): Boolean
+hasPrevious(): Boolean
+hasNext(): Boolean
+previous()
+next()
+first()
+last()
+contains(key: K): Boolean
+find(key: K): Boolean
Additional Notes:
The TableIndex class implements the TableNavigator Interface.
The purpose of the above methods is outlined in the TableIndex class.
Your Data Row Class
You are to include a class of your own to represent a row of data in the TableIndex. This is not to be a class that was covered in other programming subjects. It does not need to be complex but must include a range of data types. This class will be used to test your TableIndex class. The class should have an appropriate name and deal with something of interest to you.
Your Application Class
The application class is to make use of the TableIndex class and your data row class. It is to clearly show how the TableIndex class is used, and in doing so, test it. The class should have an appropriate name. The application class should create two indexes of different key data types. One of the indexes must make use of the Comparator interface to have a key that is in descending order.
Output
Output in the test classes/programs is to go to standard out or a text file. There should be no output from the TableIndex class or your data row class. A GUI interface is NOT required. There is no need to input data from the keyboard or file. Use the Unix script command or write output to a text file (etc) to provide example runs of your test programs. -
Need Help with Format/Partition.. using cmd
Okay guys.. Im kinda sick of trying to get my Recovery to work. Seems like its about to finish and everything is perfect.. then suddenly I get an error message saying that Recovery didnt work, or something like that..
I figured I might as well try starting with a fresh hard drive, then trying the recovery again..
So someone told me that if I have the HP Recovery disks, then I would be able to try them, even on a brand new hard drive, or a formatted one or whatever..
Is this true?
If so, then what I am asking you guys, is, if there is anybody that would be able to help guide me thru the steps needed, in order for me to Format my hard drive, & then partition it or whatever…
& I wanna be able to do all this, using cmd (command prompt)
So Please.. anyone.. your help would be greatly appreciated..
I have an HP Pavilion dv6653cl
Thanks!!Hi,
There's no need to pre-format a new Hard Drive - if you perform a 'Factory Reset' using your Recovery Discs, these will perform a quick format and also re-create all the original partitions on the new drive as part of the process.
A complete guide to using Recovery Discs can be found on the relevant link below.
Performing An HP System Recovery - Windows 7.
Performing An HP System Recovery - Windows Vista.
Performing An HP System Recovery - Windows XP.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
How do I connect my MacBook Pro to an LCD TV (with HDMI and S-Video ports)?
How do I connect my MacBook Pro to an LCD TV (with HDMI and S-Video ports)? I assume I would need to use the DVI to Video adapter that came with my computer to connect to my LCD tv. I'm just not sure which port I should use on the TV. The HDMI port is being used for digital cable.
Also, does anyone know if this can be done wirelessly?For a 2010+ MBP you can connect with a Displayport to HDMI, which will include Audio.
With older MBP you will need a displayport to HDMI, if you want audio to the actually TV, then you will need to get a cable with either digital out from MBP to the HDMI, or USB audio mixed into the HDMI
eg
http://eshop.macsales.com/item/NewerTech/CBLMDPHDMID/ -
How can you create a playlist on Ipod touch with music and music video, and play those from same playlist through Apple TV? I can download, create a playlist with both music and music video, stream that through the Apple TV with no problem. The sound and the information show up on the TV, but when it gets to a music video, it only shows the information and "artwork".
I also have a video playlist - videos play fine through the Apple TV, but will not shuffle through all videos - continues to repeat the same one. I have most definitely selected shuffle in both locations - from the playlist and on the ipod video screen while video is playing.I finally got it... had to sync the photos with the music in iMovie, arrange the voiceover in GarageBand then export to iTunes, and then I was able to put it all together in iMovie and burn in iDVD... had a few glitches along the way but finally finished : )
Message was edited by: jpewald -
I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?
For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well... -
I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?
For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well... -
When I share a video with fcpx and it goes to Quicktime, the last few seconds goes mute. I checked the clip and sent that the same route and all is fine. It is only when I send the whole 3gb video. Any ideas?
paul71054 wrote:
... Any ideas?
add a few seconds black to your project.
Try again.
could be some really weird codec problem, with 'cut' GOPs', .. somethin'...
Maybe you are looking for
-
Another multi value parameter question
I have spent the last six hours researching and testing this and I am getting nowhere. I am using CR 2008 and SQL Server 2005. I have a main report that has a six level cascading prompt. The values for all of the prompts are number values. The lo
-
i want develop a dental software ..it is RIA web application...how can develop using java(swing,applets,jsp,servlets),java script..please help me..
-
Is it true that iPhone 4s for Malaysia will not have "siri"?
Well, iphone 4s is going to hit the Malaysian markets on 16 December, but i have noticed that it doesn't have Siri. Is it True?
-
Why String Search in not working in ADF.?
Hi, I've created application in ADF with Search Options. Search Operation is working for all the Integer Values in that page but its not working for String Values. I dont know why its not able to search String Values. My AppModule bean Code :
-
I just bought a new iMAC. I want to set a password. But, the system seems to think I already have one set, and I don't know what it is. How do I reset this feature, so that I can set a password, without knowing the current password?