Help with free unlock code
I just purchased a 7290 that was supposed to be unlocked (apparently it is refurbished). It came from cingular originally. My carrier can't unlock it to work with their system. Can anyone help me with free unlock codes?
Only your carrier can provide free unlock codes.
If you contact Horizon below in my signature, they do so cheaply and reliably.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
Need help with a activation code for Adobe Acrobat X Standard for my PC, Don't have older Version of Adobe Acrobat 9, 8 or 7.
You don't need to install the older version, you only need the serial number from your original purchase. If you don't have them to hand, did you register? If so, they should be in your Adobe account. If not you really need to contact Adobe, though it isn't clear they will be able to do anything without some proof of purchase etc.
-
Unable to unlock blackberry curve 3g 9300 with the unlock code
I have the same problem and could not unlock my blackberry curve 3g 9300 from Canada's wind network.
I have called my network provider twice and obtained the unlock code. I also called back to reconfirm the unlock code.
However each time I tried to unlock my blackberry curve 3g 9300 with the unlock code ,it refuses to unlock.
please assist me with a solution.
I am John Green
Calgary,CanadaAfter the ten attempts have been used, you must get RIM to unlock the device.
There are two routes, and only two, to achieve this.
* IF your device is in warranty, contact your service provider technical support. Tell them you have this issue which needs to be escalated to RIM level customer support. I'll warn you that most carrier technical support people will first assume and think you are referring to a device security unlock, and you will need to convince them otherwise and explain clearly what you need. THEY will not be able to help you because the carriers themselves cannot unlock a device which has had the MEP code attempts depleted, and should (and you will need to ask) to have the case escalated to RIM level tech support.
* If your device is out of warranty, contact RIM direct. See the Contact Us information from the website: http://ca.blackberry.com/contact/ The options you want to select to speak to BlackBerry Customer Care are 3 (for inquiries, orders, billing, e-RMA etc) then 5 (e-RMA and Out of Warranty).
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Purchased DVD in US for Cdn viewing. Digital download will not work in Cda or US? please help with new Digital code that will work
You will need to contact the movie studio that produced the DVD and ask if they can issue you a new code valid for Canada. Apple cannot help you, and everyone here in these forums is just a fellow user.
Regards. -
Need help with adjusting Javascript code to work in Adobe Edge (Countdown)
Hello
Im a newbie when it comes to working with Javascript and Adobe Edge and need a bit of help with adjusting some javascript code to work with Adobe Edge. A friend of mine helped me with making this javascript code: Edit fiddle - JSFiddle
Its a simple countdown which counts down to a certain time at a certain date. What I aim to do is to add this code as a trigger on a text-element called "countdown" (within a symbol called "count").
I have tried to do this as the code is, but it does not work. Anyone have any suggestions?
Thanks!
Mvh,
Øyvind HermansHello again
I have stumbled upon a problem with these animations; They crash the browser after viewing them a little while, usually less than 30 seconds in.
Is this problem also occuring when you watch the animations?
Is the countdown-code to much for the browsers to handle?
Thanks in advance for your answers.
Sincerely,
Øyvind Hermans -
I need help on some HTML code if at all possible.
What I am trying to do is set up a page that someone can
enter their name address and email into a form and when they hit
the submit button it automatically sends them a premade email of my
choosing that I make prior and somehow maybe embeded into the html
code to the address that they entered? I dont know if it is
possible but I am sure it can be.
Thank you in advanceActually, you could be subject to "abuse complaints", not
"abuse".
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"bregent" <[email protected]> wrote in
message
news:fb547q$b49$[email protected]..
> >What I am trying to do is set up a page that someone
can enter their name
> address
>
> Sure, you can do it fairly easily with any scripting
language. You need to
> be
> cautious about sending automated emails to anyone
without first validating
> that
> they are the actual owners of the email address,
otherwise you open your
> site
> up to abuse.
>
> >I dont know if it is possible but I am sure it can
be.
>
> Huh?
> -
Need Help With Simple ABAP Code
Hello,
I'm loading data from a DSO (ZDTBMAJ) to an Infocube (ZCBRAD06). I need help with ABAP code to some of the logic in Start Routine. DSO has 2 fields: ZOCTDLINX & ZOCBRDMAJ.
1. Need to populate ZOCPRODCD & ZOCREFNUM fields in Infocube:
Logic:-
Lookup /BI0/PMATERIAL, if /BIC/ZOCBRDMAJ = /BIC/OIZOCBRDMAJ
then /BIC/ZOCPRODCD = ZOCPRODCD in Infocube
/BIC/ZOCREFNUM = ZOCREFNUM in Infocube
2. Need to populate 0G_CWWTER field in Infocube:
Logic:
Lookup /BIC/PZOCTDLINX, if /BIC/ZOCTDLINX = BIC/OIZOCTDLINX
then G_CWWTER = 0G_CWWTER in Infocube.
I would need to read single row at a time.
Thanks!I resolved it.
-
Would like help with treeset ,the codes that using for sorting, please ?
hi every body. i faced a problem while writing this program, everything worked properly except this one. The program is related to Jframe and it asks the user to add three labels , three text field , one text area and three Jbuttons which are add sort and exit. i could deal with add and exit but sort, i couldn't do it properly because i don't know the codes that should be added in actionperfomed?
These codes are :
package gui;
import javax.swing.SwingUtilities;
import java.awt.BorderLayout;
import javax.swing.JPanel;
import javax.swing.JFrame;
import javax.swing.JLabel;
import java.awt.Rectangle;
import java.util.ArrayList;
import javax.swing.JButton;
import javax.swing.JTextField;
import javax.swing.JTextArea;
import sun.misc.Sort;
import domain.Student;
public class StudentFrame extends JFrame {
* This method initializes btnAdd
* @return javax.swing.JButton
private JButton getBtnAdd() {
if (btnAdd == null) {
btnAdd = new JButton();
btnAdd.setBounds(new Rectangle(13, 135, 59, 27));
btnAdd.setText("Add");
btnAdd.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent e) {
btnAddClicked(); // TODO Auto-generated Event stub actionPerformed()
return btnAdd;
protected void btnAddClicked() {
// TODO Auto-generated method stub
String name = txtName.getText();
String id = txtID.getText();
String age = txtAge.getText();
Student s = new Student(name , id , age);
txtArea.setText(String.valueOf(s ));
* This method initializes btnSort
* @return javax.swing.JButton
private JButton getBtnSort() {
if (btnSort == null) {
btnSort = new JButton();
btnSort.setBounds(new Rectangle(95, 136, 62, 25));
btnSort.setText("Sort");
btnSort.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent e) {
btnSortClicked(); // TODO Auto-generated Event stub actionPerformed()
return btnSort;
protected void btnSortClicked() {
// TODO Auto-generated method stub
* This method initializes btnExit
* @return javax.swing.JButton
private JButton getBtnExit() {
if (btnExit == null) {
btnExit = new JButton();
btnExit.setBounds(new Rectangle(173, 134, 61, 23));
btnExit.setText("Exit");
btnExit.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent e) {
System.exit(0); // TODO Auto-generated Event stub actionPerformed()
return btnExit;
* This method initializes txtName
* @return javax.swing.JTextField
private JTextField getTxtName() {
if (txtName == null) {
txtName = new JTextField();
txtName.setBounds(new Rectangle(79, 11, 60, 23));
return txtName;
* This method initializes txtID
* @return javax.swing.JTextField
private JTextField getTxtID() {
if (txtID == null) {
txtID = new JTextField();
txtID.setBounds(new Rectangle(73, 55, 65, 26));
return txtID;
* This method initializes txtAge
* @return javax.swing.JTextField
private JTextField getTxtAge() {
if (txtAge == null) {
txtAge = new JTextField();
txtAge.setBounds(new Rectangle(74, 96, 61, 24));
return txtAge;
* This method initializes txtArea
* @return javax.swing.JTextArea
private JTextArea getTxtArea() {
if (txtArea == null) {
txtArea = new JTextArea();
txtArea.setBounds(new Rectangle(138, 5, 154, 128));
return txtArea;
* @param args
public static void main(String[] args) {
// TODO Auto-generated method stub
SwingUtilities.invokeLater(new Runnable() {
public void run() {
StudentFrame thisClass = new StudentFrame();
thisClass.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
thisClass.setVisible(true);
* This is the default constructor
public StudentFrame() {
super();
initialize();
* This method initializes this
* @return void
private void initialize() {
this.setSize(300, 200);
this.setContentPane(getJContentPane());
this.setTitle("JFrame");
return jContentPane;
}Edited by: hypocrisy on Apr 26, 2009 6:51 PMThere are three actionPerformed in that program.One for add Jbutton , Sort , and Exit
the codes that i have added for add button after action performed are
String name = txtName.getText();
String id = txtID.getText();
String age = txtAge.getText();
Student s = new Student ( name , id , age);
System.out.println(s);
the codes for Exit button to make it works properly was :
System.out.println(0);
But when i came to Sort Button and i tried to enter many codes but it didn't sort properly so would you like to help me with the right codes :) -
Help with basic ABAP code (merge internal tables, sort of...)
Hello,
Can someone please help write some basic code for a Basis guy with limited ABAP knowledge?
Should be some easy points for an experienced ABAPer!
I have identicaly structured internal tables I_A and I_B and I_C which have already been filled by function models I called.
How will I code the following?:
I want to read all the data of I_A into a new internal table I_MASTER (structured the same as I_A,I_B and I_C).
Then I want to read I_B and:
1)Update I_MASTER with NEW records
2)Update existing records if the value of field MYFIELD in I_B is smaller than the value of MYFIELD in I_MASTER.
Then I want to read I_C and:
1)Update I_MASTER with NEW records
2)Update existing records if the value of field MYFIELD in I_C is smaller than the value of MYFIELD in I_MASTER.
Let me know if I can provide anymore information.
Thanks in advance for you help!
Adriaan
Message was edited by: Adriaan
Message was edited by: AdriaanHi Adriaan ,
I want to read all the data of I_A into a new internal table I_MASTER (structured the same as I_A,I_B and I_C).
<b>i_master[] = i_a[] .</b>
loop at i_b .
read table i_master with key myfiled < i_b-myfield .
if sy-subrc = 0 .
append i_master from i_b .
endif.
endloop.
loop at i_c .
read table i_master with key myfiled < i_c-myfield .
if sy-subrc = 0 .
append i_master from i_c .
endif.
endloop.
Let me know if this helped .
Regards,
Varun .
Message was edited by: varun sonu -
Hello, I am new to java and I need a bit of help with some code that I'm writing. here is the code:
import javax.swing.*;
public class Test{
public static void main(String[] args){
JOptionPane.showMessageDialog(null,"We will now build a block with *'s","Block",1);
String input=JOptionPane.showInputDialog(null,"Type a number: ","Number",3);
int number=Integer.parseInt(input);
int count=0; int count2=0;
for(count2=0; count2<number; count2++){
for(count=0; count<number; count++){
System.out.print("* ");
System.exit(0);
}Now, all I need is to build a block of *'s with the number that the user inputs. With the code that I wrote I get the correct number of *'s but not in the form of a block. They just print out in a straight line. I know this is a very simple task but could someone please help me out? What do I need to modify in my code so that the *'s print out arranged as a block like so:
**********Your code only uses the print method which prints without a carriage return/line feed. So you need to add a line of code to print a carriage return/line feed. Where? well that is your task to work out.
-
Help with new error code (-1)!
Hi I am trying to update my iphone 4 to ios5. When it comes to the last stage, it shows this error of -1. I am unable to find any info related to this error code. Any help with this is highly appreciated! Many Thanks. Now the phone is unusable. Previously it showed several errors including 1600 series and they are all resolved. This is the last hudrle. Please Help!
ThanksLike many I experienced some issues when updating to iOS 5 (on launch day). I finally gave up on the Update option and chose the Restore option.
iOS 5 downloaded and installed without issue. I restored from Back Up and everything was in place. No errors.
If you are updating, try using Restore instead. -
Hi there can you help with this error code Oxc5d1281
I refilled the HP cartridges in my Photosmart C 7250 All-in-One and put them in and got this error. I have D/C power,etc and it still comes up with this error code. Now what?
Cheers,
British_ehHi british_eh
You could try resetting the printer, details here
Note though that the reliability of refills tends not be as good as originals, links below FYI.....
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00853819&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
http://www.qualitylogic.com/2009HPinktest.pdf
Kind Regards, Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP -
I bought a used Cisco 9865HD PVR Nextbox that I require help with to unlock?
I would very much appreciate help with this from someone with knowledge and patience (technoob)..lol. I am very new to this site so not sure if I am doing this properly but crossing my fingers I meet someone nice who is willing to assist me. =)
This may help with the problem if the iPod not appearing in Windows:
http://support.apple.com/kb/TS1538
You may need to put the iPod into Recovery or DFU mode as well:
http://support.apple.com/kb/ht1808
http://www.iclarified.com/entry/index.php?enid=1034
If none of that works, you may have been sold a broken iPod.
Regards. -
My Computer Product ID is: G9D66UA#ABA (HP 15 laptop). I dropped this laptop, afterwhich it was still running, though quite fitfully. After a restart it came to a blue screen with a message saying it was running diagnostics and attempting to fix problems and further said "this may take more than an hour". After approxamately 16 hours, the same blue screen displayed same message. I later pressed F2 on start up , ran a couple tests and the following Failure ID came up for each test ran: RTTSMG-77K7MS-XD7V6J-60XJ03 Can someone please tell me what this failure code means. Also, what are my repair, and especially, data recovery options (unfortunately no recent backups)? Any help would understanding this failure ID code would be greatly appreciated, EE
Whenever the Hard Disk Short DST test fails with 24 Digits Failure ID ,that indicates that the Hard Disk Drive has failed and that requires a replacement to resolve the issue This issue could be due to Application or driver conflicts, virus issues, file corruptions due to incompatible applications, improper shutdowns, update failures due to conflicts, sudden power surges, if notebook is dropped etc.. HP will provide a replacement Hard Disk Drive if the Notebook warranty is Active, If not you need buy a SATA Hard Disk Drive from a retail shop nearby Please make sure you are getting at least equal capacity as the original one in order to use Recovery Disks. If you need you can buy a larger, but not smaller capacity Hard Disk Drive. For example if you have a 500GB Hard Disk Drive you can upgrade it to 750GB Hard Disk Drive but not 320GB Hard Disk Drive Please try the below shown troubleshooting steps once:Step 01. Remove the battery and unplug the AC/Power AdapterStep 02. Press and hold the Power button for more than 30 SecondsStep 03. Plug in the AC/Power Adapter (leave the Battery out for now)Step 04. Press the Power button and check if the Unit works normal If the above mentioned steps does not help, then you can try reseating the Hard Drive on your Notebook If the issue persists again please Contact HP if your HP Notebook is under warranty, HP would replace the Hard Disk Drive and provide you a Recovery media to restore factory operating system after replacement (if you've not yet created Recovery Discs/USB Media) Note: Back up all the personal data to an external drive if it's possible. Otherwise you could connect the failed HDD via SATA to USB adapter with another PC or same PC after replacement of HDD & re-installation of OS and try copying /recovering the files. You can also refer to the below shown link for further supporthttp://www.wikihow.com/Recover-Data-from-the-Hard-Drive-of-a-Dead-Laptop Please click on the link In order to Identify, Prevent, Diagnose & Recover from Drive Failures on HP Notebook Hard Drives & Solid State Drives :http://h10032.www1.hp.com/ctg/Manual/c02876562.pdf You can Check your warranty Here to verify the status and Click Here to order a new Hard Drive Hope this helps, for any further queries reply to the post and feel free to join us again **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL 84Although I am an HP employee, I am speaking for myself and not for HP
-
Needed help with updating java code
Hello all,
Let me begin by let you know I am not a programmer and I have tried to solve this by reading on the net. I am a network admin so I tech knowledge but no programming.
I have a webcam sending a Jpg to an FTP site and there I have used an applet called view.class to refresh once a second.
site:http://70.154.170.253/webcamold.html
My problems is now that it refreshes the same image over and over. It refreshes the cached image not the new image.
From reading I suspect that it has to do with the newer version of java (it used to work fine).
I have tried using JavaCam but same issue it just refreshes cached image. Also image flickers, the applet I am trying to fix was really smooth.
I have also tried to compile code that I found on this forum but I got error dealing with deprecated code.
Any help would be greatly appreciated!!!
Code:
import java.applet.Applet;
import java.awt.*;
import java.io.PrintStream;
public class View extends Applet
implements Runnable
public void init()
setBackground(Color.white);
String s = getParameter("refresh");
if(s == null)
update = 30;
else
try
update = Integer.parseInt(s);
catch(Exception _ex)
update = 30;
filename = getParameter("picture");
if(filename == null)
System.out.println("No filename given as parameter.");
md = new MediaTracker(this);
off = createImage(size().width, size().height);
refreshImage();
public void paint(Graphics g)
g.drawImage(off, 0, 0, this);
public void update(Graphics g)
paint(g);
public void refreshImage()
img = getImage(getDocumentBase(), filename);
md.addImage(img, 0);
try
md.waitForID(0);
catch(Exception exception)
exception.printStackTrace();
Graphics g = off.getGraphics();
g.drawImage(img, 0, 0, this);
img.flush();
public void run()
while(th != null)
try
refreshImage();
repaint();
Thread.sleep(update * 1000);
catch(Exception exception)
System.out.println("Error when thread was supposed to sleep: " + exception.getMessage());
public void start()
if(th == null)
th = new Thread(this);
try
th.start();
return;
catch(Exception exception)
System.out.println("Couldn't start thread: " + exception.getMessage());
return;
} else
return;
public void stop()
if(th != null)
th.stop();
th = null;
public void destroy()
stop();
public View()
update = 30;
Thread th;
String filename;
int update;
Image img;
Image off;
MediaTracker md;This is compile error free code and regarding your issues i don't think am good at this stuff
import java.applet.Applet;
import java.awt.Color;
import java.awt.Graphics;
import java.awt.Image;
import java.awt.MediaTracker;
public class View extends Applet implements Runnable {
Thread th;
String filename;
int update;
Image img;
Image off;
MediaTracker md;
public void init() {
setBackground(Color.white);
String s = getParameter("refresh");
if (s == null) {
update = 30;
} else {
try {
update = Integer.parseInt(s);
} catch (Exception _ex) {
update = 30;
filename = getParameter("picture");
if (filename == null) {
System.out.println("No filename given as parameter.");
md = new MediaTracker(this);
off = createImage(size().width, size().height);
refreshImage();
public void paint(Graphics g) {
g.drawImage(off, 0, 0, this);
public void update(Graphics g) {
paint(g);
public void refreshImage() {
img = getImage(getDocumentBase(), filename);
md.addImage(img, 0);
try {
md.waitForID(0);
} catch (Exception exception) {
exception.printStackTrace();
Graphics g = off.getGraphics();
g.drawImage(img, 0, 0, this);
img.flush();
public void run() {
while (th != null) {
try {
refreshImage();
repaint();
Thread.sleep(update * 1000);
} catch (Exception exception) {
System.out.println("Error when thread was supposed to sleep: "
+ exception.getMessage());
public void start() {
if (th == null) {
th = new Thread(this);
try {
th.start();
return;
} catch (Exception exception) {
System.out.println("Couldn't start thread: "
+ exception.getMessage());
return;
} else {
return;
public void stop() {
if (th != null) {
th.stop();
th = null;
public void destroy() {
stop();
public View() {
update = 30;
}
Maybe you are looking for
-
Report for Material Cost Estimate
Hi Everyone, Is there any way that I could download a report from the SAP showing all the material cost estimates? Hope someone could help me. When I try using CK11n, there is no tab there for report downloads and it only shows one material. Thank yo
-
Service condition records in contract
Hi We have created service master....maintained the condition records for the same(Vendor/Plant/Pur Org combination) When we are creating a contract and mention the service master in the services list,it is not picking the value maintained in the con
-
Need to Upgrade IGS,JAVA Engine
Hi folks, how to check out IGS kernel level? I need to do Kernel upgrade for IGS and Java Engine, can u guys please send me the steps how to do it. And what files i need to download from market place? right know i have sp-09 Thanks in Advance regar
-
OIM 9.1 certification matrix
Hi, there is a new document a few days ago about installing OIM 9.1 under Oracle Application Server (http://download.oracle.com/docs/cd/E10391_01/doc.910/e10368/toc.htm) also release notes document have been updated (http://download.oracle.com/docs/c
-
TS3276 How do I delete flagged mail?
I have a few bills that I flagged so I don't miss them. Once paid, I want to delete the message so the box is not cluttered. When I hit Delete, it goes away, but the number stays next to the mailbox, and when I go to another mailbox then return to