Help with Freeze Frame :)

Greetings all,
Sometimes when I use freeze frame the still image is great. Other times it is fine when rendered but then blurry on a DVD.
Is there a way to create a  single frame still from a video clip?
thanks!

One way:
After you have your still frame on the timeline, go to the Effects Tab > Video Filters > Video and drag the Deinterlace filter on to it.
MtD

Similar Messages

  • Frame sequence to quicktime ends up with freeze frames at end

    I'm just using Compressor 3.5.0 to convert animation file sequence (24fps) into quicktime Proress422HQ (23.976fps). Any settings end up with freeze frame at the end of clip. I've tried 24fps to 24fps and still got same problem. Being curious, I've tried to convert to MPEG4, and still got the same problem. Originally the source format is PNG sequence, and I've convert the PNG into TIFF for test purpose. Still no luck. Does anyone ever experienced the same problem? Thanks for sharing.

    Solved by changing the frame rate of the footage (image sequence) into any other frame rate, then change back to desired frame rate. In my case, after load the image sequence >check inspector of footage >change current frame rate (from 24fps to other fps) >change back frame rate to 24fps. Same bug in version 3.5.2. Hope it helps.

  • Combining APEX help with a frame-like TOC html help system (I used DITA)

    Problem:
    The APEX page-oriented help system is bad at helping users find how to do something. I prefer to use a task-oriented help system for that, with a table of contents that users can browse around in. I like the DITA (Darwin Information Typing Architecture) system's topic based help with its ideas of tasks, concepts and references. But, I also like the context-based feel of a page-based help system and the way that the APEX help system automatically aggregates all of the item-based help on a page for you.
    My Solution:
    I'm no html genius, so this may be totally wrong, but what I did was to create a task oriented html user guide that also included a page based help TOC entry for each page. I then used iframes in the APEX help page to allow me to have a TOC always showing with links that controlled a content "pane," but still also display the automatically-generated item help for the page help is called from.
    * Downloaded the DITA open toolkit (http://sourceforge.net/projects/dita-ot ), full package distribution and installed using the user guide (http://dita-ot.sourceforge.net/doc/ot-userguide131/xhtml/ )
    * Downloaded and installed XMLmind XML editor free personal edition version ([http://www.xmlmind.com/xmleditor/download.shtml]). I'm not endorsing this thing, but it's free and it works great out of the box for editing DITA files.
    * Created an html user guide by modifying the garage sample that's included with the DITA open toolkit and publishing to xhtml (I also published to pdf2, by the way, to provide a printable user guide for my users to download...one of the nice things about DITA). I set up my files so that they would all be in a topics subfolder, rather than the standard task, concept, and reference folders of the example. I did this so that I wouldn't have to worry about linking to a different folder from APEX (more on that later). I made a concept topic for each page of my application with the filename "Concept_About_page_X.dita," where X is the APEX page number.
    * I run APEX using Oracle Application Server 10g, so I uploaded the files to a subdirectory of their own in the i/ folder on the OAS server. In my case this was APPSERVER_HOME/apache/apache/images/doc/MyAppHelp/
    * The DITA toolkit generates html pages that look for a CSS called commonltr.css, located at the same level as the index.html file. I copied my APEX theme's CSS file to that same place and renamed it commonltr.css (in my case that was APPSERVER_HOME/apache/apache/images/themes/theme_13/theme_V3.css). Now, the proper thing to do would be to configure DITA to point at the real location of the theme's CSS, I guess. But I didn't want to figure out how to do that at this point.
    * Now, in APEX, I deleted all of the page-level help text from my pages, since I had now duplicated this information into the DITA page concept topics. Instead, on each page I put
    * On the help page (the page that you create when you're first setting up Help in APEX, mine is page 50), I added the following iframe tags in the header text of the page: \\      <iframe src="../../i/doc/gradevalhelp/index.html" width="40%" height="50%" align="left"></iframe><iframe name="contentwin" src="../../i/doc/gradevalhelp/topics/Concept_About_page_&REQUEST..html" width="60%" height="50%" align="right"></iframe><br> \\      Note the <br> at the end. I had to put that in to prevent the item level help from printing over my content iframe. Again, someone who knows something about html could probably tell you the right way to do that. The DITA toolkit generates a base tag (<base target="contentwin"/>) in the head section of the index.html file, to make the target of the TOC links be the content frame. Notice how I use it to map the links in the first iframe to the second iframe on the APEX help page, by naming the second frame "contentwin". Notice how the &REQUEST. Substitution string is used to present the proper DITA html file. I also tried setting it up to use a calculated hidden item that looks up the page alias for the requesting page; this had the advantage of allowing me to name my DITA files using page alias instead of page number, but it was too slow.

    Look at all the apdiv's you have.  Those are absolutely positioned layers.  I'm assuming by your post that you are very new to Dreamweaver and HTML and CSS.  I would highly recommend not using absolutely positioned layers until you have a better grasp on HTML and CSS.
    Looking at your code I would suggest that you consider using one of Dreamweaver's built in, or downloadable templates as a starting point and work from there. 
    http://www.adobe.com/devnet/dreamweaver/articles/dreamweaver_custom_templates.html

  • Help with copying frames

    Hi,
    Thanks in advance for spending some time helping me with this issue. Im new to the Flash world
    I am actually designing a website and need to copy frames from one page to another. The problem is that after pasting the frames in a different location I dont seem to be able to edit it without having the original frame change. Is there anyway I can copy frames (animation, buttons etc) and still be able to edit them without having the original frame change?
    My intention is two have multiple pages with the same basic design but slight modification on each page.
    Thanks

    copy frame 1 to frame 2.
    make a list of all the library objects in frame 2.  (anything else that's not in your library (like shapes) you can edit in frame 2 and they won't change in frame 1).
    in your library, right click on one of the objects you noted in you list, click duplicate, click ok.  (you may as well accept the default name for now.)
    do the same for all the objects in your list.
    now, click on one of the objects in frame 2 to select it.  in the properties panel click swap and select the duplicate.  do the same for all the frame 2 objects.
    you can now (or anytime after they were created) edit the duplicate objects.  frame 2 will reflect those changes.  frame 1 will not.

  • Need help with inserting frame with scrolling images

    Hi,
        Im a beginner and need help putting a single box/frame with scrolling images in the middle of my layout, so that when viewed in browser, the header and footer remain in place, while the images and info in the frame in the centre of the page can be scrolled down/up?

    You can use an iframe element <iframe src="" width="" height="" scrolling="yes"> though if you're concerned with crawlers you should avoid frames as much as possible. 

  • Help with putting Frame inside Frame

    I have created two Frames: one with the code that works with the buttons (StudentsFile) and the second as a Tabbed Frame (TabbedPaneDemo).
    I want to put StudentsFile into one of the tabs. The files compile but when I run TabbedPaneDemo the window that is created in StudentsFile comes up but it is not in the Tabbed window. What Am I doing wrong?
    Any assistance would be appreciated.
    This is the portion of the TabbedPaneDemo where I put in the StudentsFile into Panel 1.
    public class TabbedPaneDemo extends JPanel {
        public TabbedPaneDemo() {
            super(new GridLayout(1, 1));
            JTabbedPane tabbedPane = new JTabbedPane();
            ImageIcon icon = createImageIcon("middle.gif");
            JComponent panel1 = makeTextPanel("Panel #1");      
           StudentsFile simpleTable = new StudentsFile();
            tabbedPane.addTab("Report", simpleTable);
            tabbedPane.setMnemonicAt(0, KeyEvent.VK_1);
            JComponent panel2 = makeTextPanel("Panel #2");
            tabbedPane.addTab("Tab 2", icon, panel2,
                    "Does twice as much nothing");
            tabbedPane.setMnemonicAt(1, KeyEvent.VK_2);
            JComponent panel3 = makeTextPanel("Panel #3");
            tabbedPane.addTab("Tab 3", icon, panel3,
                    "Still does nothing");
            tabbedPane.setMnemonicAt(2, KeyEvent.VK_3);
            JComponent panel4 = makeTextPanel(
                    "Panel #4 (has a preferred size of 410 x 50).");
            panel4.setPreferredSize(new Dimension(410, 50));
            tabbedPane.addTab("Tab 4", icon, panel4,
                    "Does nothing at all");
            tabbedPane.setMnemonicAt(3, KeyEvent.VK_4);
            //Add the tabbed pane to this panel.
            add(tabbedPane);
            //The following line enables to use scrolling tabs.
            tabbedPane.setTabLayoutPolicy(JTabbedPane.SCROLL_TAB_LAYOUT);
        }This is the portion of the StudentsFile where I setup the Frame.
    public class StudentsFile extends JFrame
         //Sets Size of Frame
         private static final int WIDTH = 450;
         private static final int HEIGHT = 450;
         //Declares Text Fields
         private JTextField FNameTF, SIDTF, AddressTF, CityTF, StateTF, TelephoneTF ;
         //Declares Labels
         private JLabel FNameL, SIDL, AddressL, CityL, StateL, sheadingL,  TelephoneL, StatusL;
         //Declares Buttons
         private JButton openB, saveB, shelpB,sexitB, senterB ;
         private ButtonHandler bhHandler;
         //Declares Combobox that will list selections for teacher to select
         private JComboBox Selections;
         //Declares text areas     
         private JTextArea /*SoutputTA,*/ statusTA;
         //Declares filechooser for input/output file
         JFileChooser sfc = new JFileChooser();;
         //Creates object of StudentInformation
         private StudentInformation Studentdata = new StudentInformation();
    public StudentsFile()
         //sets title and size of frame
         setTitle("Student Entries");
         setSize(WIDTH,HEIGHT);
         setBackground(Color.red);
         //Gets the frame
         Container pane = getContentPane();
         pane.setLayout(null);
         pane.setBackground(Color.yellow);
         //Creates button handler
         bhHandler = new ButtonHandler();
         //creates label to be used on pane
         sheadingL = new JLabel ("Student Information Center",
                        SwingConstants.CENTER);
         //sets the labels
         FNameL     = new JLabel("Student Name");
         SIDL       = new JLabel("Student ID");
         AddressL   = new JLabel("Address");
         CityL      = new JLabel("City");
         StateL         = new JLabel ("State");
         TelephoneL = new JLabel ("Telephone");
         StatusL        = new JLabel ("Status");
         //sets size of text fields
         FNameTF     = new JTextField(30);
         SIDTF       = new JTextField(20);
         AddressTF   = new JTextField(30);
         CityTF      = new JTextField(8);
         StateTF     = new JTextField(30);
         TelephoneTF = new JTextField(20);
         //sets size of text area to display status to teacher
         statusTA = new JTextArea(3, 10);
         //sets title of buttons and creates action listener
         openB = new JButton("Open");
         openB.addActionListener(bhHandler);
         saveB = new JButton("Save");
         saveB.addActionListener(bhHandler);
         senterB = new JButton ("Enter");
         senterB.addActionListener(bhHandler);
         shelpB = new JButton ("Help");
         shelpB.addActionListener(bhHandler);
         sexitB = new JButton ("Exit");
         sexitB. addActionListener(bhHandler);
         //Options that will appear in combo box
         String selection[] = {"Choose From The Available Options ",
                        "Add Student","Search for Student", 
                        "Edit Student Record","Delete Student Record"};
         Selections = new JComboBox(selection);
         //sets size of labels, text fields, buttons
         sheadingL.setSize(200,30);
         StatusL.setSize(50,20);
         SIDL.setSize(100,30);          
         SIDTF.setSize(200,30);       
         FNameL.setSize(100,30);          
         FNameTF.setSize(200,30);     
         CityL.setSize(100,30);          
         CityTF.setSize(200,30);          
         AddressL.setSize(100,30);     
         AddressTF.setSize(200,30);     
         StateL.setSize(100,30);          
         StateTF.setSize(200,30);     
         TelephoneL.setSize(100,30);     
         TelephoneTF.setSize(200,30);          
         statusTA.setSize(370, 30);
         Selections.setSize(400,30);
         openB.setSize(80,30);
         saveB.setSize(80,30);          
         shelpB.setSize(80,30);
         sexitB.setSize(80,30);
         senterB.setSize(80,30);
         //sets location of labels, text fields, buttons on frame
         sheadingL.setLocation(110,20);
         FNameL.setLocation(70,110);
         FNameTF.setLocation(170,110);
         SIDL.setLocation(70,140);
         SIDTF.setLocation(170,140);
         AddressL.setLocation(70,170);
         AddressTF.setLocation(170,170);
         CityL.setLocation(70,200);
         CityTF.setLocation(170,200);
         StateL.setLocation(70,230);     
         StateTF.setLocation(170,230);
         TelephoneL.setLocation(70,260);
         TelephoneTF.setLocation(170,260);
            StatusL.setLocation(30, 300);
         statusTA.setLocation(30, 330); 
         Selections.setLocation(20,60);
         openB.setLocation(20,370);     
         saveB.setLocation(100,370);
         senterB.setLocation(180,370);          
         shelpB.setLocation(260,370);
         sexitB.setLocation(340,370);
         //adds labels, text fields, buttons to pane
         pane.add(sheadingL);
         pane.add(SIDL);
         pane.add(SIDTF);
         pane.add(FNameL);
         pane.add(FNameTF);
         pane.add(AddressL);
         pane.add(AddressTF);
         pane.add(CityL);
         pane.add(CityTF);     
         pane.add(StateL);
         pane.add(StateTF);
         pane.add(TelephoneL);
         pane.add(TelephoneTF);
         pane.add (Selections);
         pane.add (openB);
         pane.add (saveB);
         pane.add (shelpB);
         pane.add (sexitB);
         pane.add(StatusL);
         pane.add(statusTA);
         pane.add(senterB);
         setVisible(true);
         setDefaultCloseOperation(EXIT_ON_CLOSE);
    }

    I haven't looked at all of your code, but I do see that you are trying to put a JFrame, which is a root container into a JTabbedPane, and this just cannot be done. It would be better to refactor your StudentsFile class to extend a JPanel, and then you can add it to a JTabbedPane.
    Oh, and please ask these types of questions in the Swing forum.

  • Help with Master frame placeholders

    Hi.
    I'm using IDCS3 v5.0.2 on windows vista SP 1
    Im using facing pages with facing masters, which only differ on the left and right header title. I placed graphic frame placeholders in both left and right pages of a master, that I used to place content (images) in the document pages. All works fine and I can move things on that master with exact results in the pages assign by it. The problem comes when I move or add another page, then the page graphics (images) get detached from the master frame placeholders, and Im no longer able to control them from the masters.
    Any help would be much appreciated
    Regards

    Yes you're right, it works ok when i add pages in pairs.
    Maybe I can also disable the "allow pages to shuffle" command and add pages one by one? This way it works too.

  • Help With Freezing Nano

    Ok, so my iPod works fine when it is connected to the computer, but it dies as soon as I disconnect it. The screen slices diagonally and freezes, and the picture slowly fades away.
    My computer says its fully charged, and I've tried resetting it and putting it into Disk mode, but still no luck. And it has been charging for quite a while now. Any suggestions would be much appreciated!!!
    Oh, and when I re-plug it into the computer, I have to re-select the language, as if it totally resets. It does this even when I dont reset it. By the way, I only reset it when its plugged into the computer, because it doesnt work at all when it isnt plugged in.
    Its about 4 days old.

    I need some help.... My Ipod was on its charger(computer) and my setting is that when the ipod is connected to the computer, Itunes would appear.stillI tunes would not appear but then my ipod will not turn on. The "Donot disconnect" screen will not go away and I donot know what to do. How do I get in contact with a Apple Store near me if the yellow pages and the wbsite isnt giving me anything? I have a 2-year warrenty

  • Help with repeating frame delay

    I have this movie in which basically a screen is supposed to come on, hold for 15 seconds, move to the next one, (a little bit of tween in between) hold for 15 seconds, move to the next one, etc. But the whole time there is also a button which enables the viewer to go to the next screen before the 15 seconds have elapsed.
    My initial solution for this was to just put in a lot of frames to make them last 15 seconds, but with many such instances repeating it becomes really hard for me to navigate the flash timeline.
    So I've found several scripts that would allow me to pause a frame, but they all have the same bug. For example, a frame action like this:
    stop();
    function wait() {
    play();
    clearInterval(myInterval);
    myInterval = setInterval(wait, 15000);
    It works fine the first time, and works fine if you don't touch the "play" button, but if you click it a few times, after a few times the screens no longer wait 15 seconds to move on, but start moving at random intervals.
    I found that script (and several similar ones which behave the same way) in some forum somewhere, but I noticed the posts were all very old. I haven't been able to find if newer action scripts and flash players support some better tricks to do this?
    Anyone know a workaround, some way to get all those frames to pause in their own time without their intervals piling up and messing each other up? Maybe some action to put into the "play" button? Or into the frame?
    Anything other than inserting endless amounts of identical frames into the timeline.
    Here's my flash file if you'd like to take a look. It's very basic, I admit I'm not very avid in flash. It's Flash8:
    https://www.yousendit.com/download/WTNMeEVRTXYzeUkwTVE9PQ
    and the swf:
    https://www.yousendit.com/download/WTNMeEVTTk04aU0wTVE9PQ
    I'll really appreciate every help. Even if i need newer flash, all advice welcome.

    I don't know if I did something wrong but I get this error when I do that:
    **Error** Scene=Scene 1, layer=navigation, frame=1:Line 1: Statement must appear within on handler
         autoAdvanceF();
    Total ActionScript Errors: 1      Reported Errors: 1
    I mean I only put
    autoAdvanceF();
    into the button action, nothing else...
    is something else supposed to go with it?
    I don't know action script, I just sort of paste stuff and sometimes it works.
    EDIT
    sorry I'm an idiot.
    on (release) {
        autoAdvanceF();
    ok got that now.
    but when I do that what you said, put that first code into the first frame action, and that second code into the button action, the movie doesn't play at all
    Message was edited by: tinathpot

  • Help with using frames for animation

    I am using frames to animate webpage using fireworks 4 (I
    know, hopelessly outdated). I seem to have two different
    collections of frames that interact- one for the main image, and
    one for the slice I'm trying to animate as a GIF. I can't seem to
    change the time delay for each frame when I'm editing the slice.
    What can I do to make this work?

    Yep you have answered your own question.
    Choose export, file export and click the scale images option, and original options (assuming they are already jpegs).
    (As you say exporting as webpage creates the page for you but can create images in two sizes (thumnails and main) which can be helpful. The downside the that the filenames for the images as numeric. 1.jpg, 2.jpg etc.)
    While a longer process and with no direct control over file size and quality I prefer the file export option as above. It preserves filenames and quality is fine.
    and do choose 'original' as you should avoid re-saving a jpeg as a jpeg (that causes a quality reduction)
    You will need to manually bring the images into your web pages (save the exported images into your site folder and bring each one into your page individually) unless you are very clever with filenaming!
    Hope this helps.
    M.

  • Need help with photo frame

    Below is a quick frame I made to re-use on my photos, which I overlayed onto an image.  I set the Blending Mode to Screen for the Frame Layer.
    The problem I am having is that when I try to reverse the colors on the frame, so that the border is Black, I get a pile of garbage.  The only part of the image that is visible is the area that should be hidden by the border, and the center of the image is white.  If I make the frame within the context of the image, it works, but not if I make it from scratch.
    What am I doing wrong?

    If you followed the steps, just fill Layer 1 with black or any color that you want the frame.
    Edit>Fill

  • Help with floating frames or scrolling index

    I think I am trying to do something simple and just don't
    know how to do it. I would like to set up a scrollable text box on
    an existing page so that the page doesn't have to be super long
    with info...users can just scroll in the text box. I can't seem to
    fiqure it out. text within the box will have links to outside of
    the host site, and I would like to maintin the color scheme as
    well. Any simple solutions out there or do I need to get into the
    thickness of frames?
    Thanks.

    you could use a layer with the Overflow property set to Auto
    or Scroll
    jackchickadee wrote:
    > I think I am trying to do something simple and just
    don't know how to do it. I
    > would like to set up a scrollable text box on an
    existing page so that the page
    > doesn't have to be super long with info...users can just
    scroll in the text
    > box. I can't seem to fiqure it out. text within the box
    will have links to
    > outside of the host site, and I would like to maintin
    the color scheme as well.
    > Any simple solutions out there or do I need to get into
    the thickness of
    > frames?
    >
    > Thanks.
    >

  • Need help with freezing...please respond!

    I just got my reconditioned ipod mini yesterday. The problem is that at the main menu the scrolling mechanism works (thumb rotation), but the select button does not (I can't get into any submenus). I called Apple support, and they said to reset. I did this; the mini worked OK once, but then started to freeze up again, and now, no matter how many times I reset, it doesn't help...I'm stuck at the main screen, and the select button won't do anything. The apple support guy says he has to reset his mini 2-3x a week, but I've been able to make my ipod work only once or twice, and I've had it a day. PLEASE HELP.

    I keep trying that too...doesn't seem to help. Have tried plugging it into the AC adapter and resetting; doensn't help. Updated my ipod/itunes software; doesn't help. I don't want to try restarting the ipod; I just spent 6 hours putting music on itunes today, and don't know how to create a backup...and I read the restart instructions and don't know how to do all of the steps. Its amazing to me that this unit works so poorly literally the first day out of the box. How disappointing.

  • Noob Help with inserting frame- is there a better way

    Hi,
    I am trying to create a frame in dreamweaver mx, but rather
    than have a whole frameset, i just want 1 frame. (i dont know if i
    am going about it the wring way).
    The page is at this link
    http://www.cryptomnesian.com/CryptomWebPage.html
    I want the large box with the KPA to become the main content
    box (this would eb the framed box), so that the mp3 player in the
    top would not reload when a link was clicked. The links would
    hopefully load up a new box.
    Are frames the best way to so for this?? I am a noobie as far
    as frames and css goes. Any suggestions or solutions much
    appreciated.
    Thanks,
    perino

    Look into using a Card Layout rather than manually swapping the panels: http://java.sun.com/docs/books/tutorial/uiswing/layout/card.html

  • Help with Freezing? (eMac OS 9.2)

    Hi Everyone,
         I'm a bit of a PC guy, but I'm working as a contractor for a local private school that has a pair of eMacs which need repair. One of them, I've found from the research I've done, most likely has a fried logic board. The other one is running OS 9.2 using Kidsdesk, which is a piece of software that overlays finder and only allows kids access to the games listed under each grade. The problem is, this machine keeps freezing up under normal use from the students, and I have no idea what to do. I've considered wiping the machine and reinstalling OS 9.2, but I have no idea where I could obtain a disk for it in 2011. Does anyone have any troubleshooting tips for this machine, or hints on where I can obtain a legal disc for OS 9.2 other than Craigslist or similar?
    Thanks!
    ~TitaniumFox

    Hard to tell what might be causing it to freeze up without more symptoms. Are there any specific conditions under which it freezes? Something like following a specific action or set of actions by the user... always within the same program... etc.
    If you boot it with Extensions Off, does it still freeze up? To do that, restart or boot, press the Shift key and keep it held down until the desktop appears.
    How full is the hard drive?
    Re a replacement install CD, all eMacs which are OS 9 bootable can boot only to OS 9.2.2. Since there is no retail version of OS 9.2.2, you will need to use only the original model-specific disk that came with such a machine when it was new. They're not easy to find.
    You may be able to acquire or borrow such a disk from an Apple User Group near you - most large cities and universities have one.
    Apple - User Groups

Maybe you are looking for