Help with "gapless plaayback " and "syncing" problems

ok....i just restored my ipod to factory settings after it would restart at random intervals. After everything was erased, it loaded only my playlists, and then went on a "analyzing gapless playback Info" for a bit, then upload 2 or 3 more songs, then pop up an error message saying that "SONG "a" COULD NOT BE IMPORTED TO CRUCHIES IP" and would not load anymore songs. then, it would start cutting songs in half to different tracks..i only have 325 out of 3000 and i am angry.i need help with this... i dont want to have to re-install itunes, because i figure it would erase my perchases fron the itunes store.?/?/?/? or do i not haave a choice? has anyone else had this problem??? please give any info you can.

*I'm at work at the moment*
I bought 2 kits of the Corsair value ram (see sig for part number), 512 mg sticks, total 4 sticks. When you say just put 2 matching ones in, I think I did that. I tried 2 sticks at a time, switching them out so I'm pretty sure I tried all combinations of them and the pc wouldn't boot using 800fsb and 667 ram speed. It will boot and run ok at 667 FSB and 400 ram speed, because I've been using it like that since about the 2nd week of Nov. Will try again to just boot using 2 mem modules at full FSB/Mem speed but I know I've tried that before and the pc would lock. Not for sure what you meant by 'matching' as all 4 are the same brand/model etc.
As for the EIT? or whatever it was, I don't recall clicking that anywhere , is that a BIOS option? I'll check when I get home but I'm not recalling choosing that option. Google showed that to be some some of processor power saving option or something.
As for linking where I bought them at, I got them from Newegg. Newegg doesn't have the MB anymore, they have a refurbished unit but here's the link to the MSI page
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=663 , here's a link to the refurb one on Newegg
http://www.newegg.com/Product/Product.asp?Item=N82E16813130501R
The ram is http://www.corsairmemory.com/corsair/valueselect.html#ddr2dimm the 2nd one under pc2-5300, the VS1GBKIT667D2. I bought 2 of those kits. Newegg link http://www.newegg.com/Product/Product.asp?Item=N82E16820145568
What I've read on the support pages, MSI supports that ram and the ram shows that MB as being supported.
Appreciate the replys.

Similar Messages

Can anyone help with a CS5 Audio Sync problem?

making a simple game with video stills matching a running audio track
my audio is an MP3 i built in GarageBand
all works well in flash, but when rendered to QT, the audio and video go out of sync, and some video drops out too
have put all audios on their own layer and streamed them all too, set settings in Publish to 64, but still have same problem
any help?

Sorry, can't help. But misery loves company. I have the same problem with Premiere.

Can anyone help with YouTube embed and scrolling problem?

Hi,
Whilst working on a mobile version of a site, I've noticed that if you're scrolling through on a device and the area with the YouTube embed is near the top of the screen, it'll suddenly scroll all the way back up to the top of the site. This only seems to happen with the YouTube embed, the rest of the site seems to work fine.
Anyone else had similar issues?
The site is www.cowandbell.com/phone
I'm using an iPhone5 running iOS7 and it's happening in Chrome and Safari.

Sorry if it sounded like I was telling you to "go away." Far from it: I was trying to point you to the place where you might get an answer most expeditiously. I'm trying to save you time vs. simply having your question sit around unanswered.
For example, if other Parallels users have had the same problem, the Parallels folks would be the most likely know. I would not assume that"Parallels' answer will inevitably be, "We don't support third-party software."without first asking them.
You'd be surprised to know how many times folks post questions here about third-party applications and the questions go unanswered, while the answer is actually waiting to be found at the Web site of the third-party app's developer.
You might also try the HP Web site since it may be a general problem with that set of drivers under Windows.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

Need help with a download and install problem with PS Elements-Elements opens but Premier has error popup

I purchased PS Elements and Premier Elements through Academic Superstore as a download on Aug. 8, 2014. I am installing on a MAC Book Pro 10.9.4, and have tried reinstalling 3 times. I also searched the error messages on support and could not find the error I am getting. Every time I am able to open the Elements file will open and work, but the Premier file has a window pop up that says: The Following disk images couldn't be opened: Image - PremiereElements_12_WWEFDJ.dmg Reason - image not recognized. Does anyone have a solution?

PremiereElements_12_WWEFDJ.dmg is the installation file. http://www.ofzenandcomputing.com/how-to-install-dmg-files-mac/
if you're seeing that message when trying to install pre 12, you have a corrupt download. redownload:
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Please can anyone help with the continuing password rejection problem with email.Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

Please can anyone help with the continuing password rejection problem with email on my imac.My Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

I use free Yahoo mail webMail access because folders I created in webmail access doesn't get set up in Apple Mail. While I was searching for post about password and keychain issues, I stumbled on several threads that complain about Mail folder issues, so I'm holding off on Apple Mail.
On the password and keychain issue that your post is all about. I've been using login keychain to save and automatical fill my login screens for a year or so successfully, with Safari and Chrome. Automatic form fill also works for Facebook login. Unfortunately, about 4 to 6 months ago, automatic password form fill stopped working with Yahoo webmail, while still worked for GMail (Safari and Chrome). I tried deleting the password entry for my two Yahoo email accounts to start fresh, but neither Safari not Chrome will even ask me if I want to save the password. I was so frustrated that I eventually installed the keypassX 0.43 (password manager) that is quite primitive sompare to OS X's keychain (when it works). Probably no surprise to you yet.
The surprise, to me at least, is that, for whatever reason, password auto form-fill from keychain started working again for Yahoo webmail login on Safari about 5-7 days ago. Still doesn't work on Chrome!
Two tips I can share, at least with webmail access:
1. Password is save only for one of my yahoo mail accounts. When I login in with my other yahoo account, I get no prompt to save the password, and form fill doesn't work when I try to log in a second time with my other Yahoo mail account.
2. On inspection of my login keychain, I see a webform password item saved for my Yahoo account that works with keychain. The name of the password is: login.yahoo.com(MyAccountName1#). When I open the password item and look in the Access Control tab, I see Safari and Chome are listed as allowed to access this password item..
I also an "Internet password" item with a name of just login.yahoo.com. When I open the the password item, it looks just like the password item created for MyAccountName#1, but the MyAccountName#2 is listed in the Account field. Inside the Access Control tab, no apps are listed in access permission. I added Safari and Chrome to the lists of allowed app, saved the password item.
Now when I bring up the Yahoo login page(by bookmark) on Safari, form fill fills in MyAccountname#1 for name and the proper password and I can login in. When I change the name to MyAccountName#2, the correct password is retrieved and I can log in! Alas, it still doesn't work on Chrome.
BTW, I changed the password item type from "Internet password" to "Web Form password" and saw no difference! I also edited the name to be "login.yahoo.com (MyAccountName#2)" to look like the web form password item that works, but it has no effect either.
From my experimentation, here's my observation:
1. A Web Form password item is created for the first account name(MyAccountName#1) for login.yahoo.com and typed as Web Form password. When I log in using MyAccountName#2, an Internet Password is created, but no applications are listed as allowed to access the password item, even when the password item was created after just logged in and logged out to yahoo with the account name and password for MyAccountName#2.
2. Manually adding Safari as an app that is allowed to use the password item works. Doesn't work with Chrome!
The version of Safari I'm using is Version 5.1.7 (6534.57.2). My installed version of Chrome is Version 21.0.1180.79 beta.

Power and Sync problems with Zen Vision:M

)Power and Sync problems with Zen Vision:MX Lately, my Vision M is having problems that when I plug it into the USB port on any PC to charge it, it lights up for a moment and then goes blank.
When I unplug it and reseat the usb cable, nothing happens. When I try to turn it on, it's dead. This happens even though it's not fully depleted of battery energy.
Pressing the reset button does not do anything. The only thing that I've found that will work is to open it up and unplug the battery. But even that is starting to not work.
This doesn't happen every time I use it, but it is happening quite a bit. It's gotten to the point today that I can't even charge the battery at all.
Any suggestions? I don't think it's the battery, as it does charge when I don't have these issues, but I'm not really positi've of that either.

The connector on the motherboard check it . It may need to be resoldered. The last time I ran into those symptoms that was the solution.

Need help with Blog, Wiki and Gallery

Hi Team,
Need help with Blog, Wiki and Gallery startup. I have newly started visiting forums and quite interested to contribute towards these areas also.
Please help.
Thanks,
Santosh Singh
Santosh Singh

Hello Santhosh,
Blog is for Microsoft employees only. However, you can contribute towards WIKI and GALLERY using the below links.
http://social.technet.microsoft.com/wiki/
http://gallery.technet.microsoft.com/

What's the phone number I should call for help with my iPhone and ihome dock?

What's the phone number I should call for help with my iPhone and ihome dock?

http://www.ihomeaudio.com/support/

Help with photoshop quitting and AMD graphics

help with photoshop quitting and AMD graphics
im not a techy, but it appears i have to do someting with my amd graphics card - this might be why my software is crashing - ive no idea what to do though

Hi Chris
I have tried to go on the website, then i tried to download the automatic detect because i wasnt sure which driver i had or needed - but it has just downloaded a load of game software - which i dont want ( i dont think)
i have find out my laptop has a amd radeon HD 8750M card, but i dont know what im doing! i would hate to mess my computer up as i am in thailand with no one to help me!
its frustrating as i am paying for CC but cant use it!

Hi i have i problem with my iphone and the problem is the security question i have forgot the answers

Hi i have i problem with my iphone and the problem is the security question i have forgot the answers
I understand German and Italian i littlebit English

You need to ask Apple to reset your security questions; this can be done by phoning AppleCare and asking for the Account Security team, or clicking here and picking a method, or if your country isn't listed in either article, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(106626)

Can I use my same itunes that I use with my iphone and sync it to my ipad?

Can I use my same itunes that I use with my iphone and sync it to my ipad? That is, can I sync all my existing apps, etc that i use on my iphone to my ipad, without messing anything up?

Yes.
iPhone apps will not be able to use the full screen resolution, but most if not all will work.

Sync help with new itunes and iphone update 3gs needed!!?

hi there, ive recently updated my itunes and iphone simultaneously. my iphone says it is now got 0s 3.1.3 but my itunes says it is 9.0.2.25 NOT 9.03.
When i tried to sync it , it comes up with the message - unknown error (-39)
have tried reupdating and syncing but wont work/ please some help??!!!
cheers, mark
p.s. this is the first problem iv had with the phone since purchasing

HIYA THERE, just to update you , iv perofrmed the diagnostics tests and it passed them all including syncing!!
here are the results of that testing if thats any help at all.
Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
Sony Corporation VGN-FW11E
iTunes 9.0.3.15
QuickTime 7.6.5
FairPlay 1.6.16
Apple Application Support 1.1.0
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.6.0.32
Apple Mobile Device Driver 1.45.0.0
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number 62D18ECE943CD279
Current user is not an administrator.
The current local date and time is 2010-02-22 14:42:44.
iTunes is not running in safe mode.
Video Display Information
ATI Technologies Inc., ATI Mobility Radeon HD 3470
** External Plug-ins Information **
No external plug-ins installed.
The drive H: MATSHITA DVD-RAM UJ870QJ Rev 1.01 is a USB 2 device.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {65E1948C-C19F-4514-B665-5F275E79C0FD}
Description: Intel(R) WiFi Link 5100 AGN
IP Address: 192.168.0.3
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
DHCP Enabled: Yes
DHCP Server: 192.168.0.1
Lease Obtained: Mon Feb 22 13:04:26 2010
Lease Expires: Tue Feb 23 13:04:26 2010
DNS Servers: 192.168.0.1
192.168.0.1
Adapter Name: {7E9A20F0-9B2E-4102-A7AA-A61684C68515}
Description: Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: No
DHCP Server:
Lease Obtained: Thu Jan 01 00:00:00 1970
Lease Expires: Thu Jan 01 00:00:00 1970
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Disabled
Firewall Information
Windows Firewall is off.
Connection attempt to Apple website was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2010-02-22 14:36:10.
** iPod/iPhone Connectivity Tests **
iPodService 9.0.3.15 is currently running.
iTunesHelper 9.0.3.15 is currently running.
Apple Mobile Device service 2.50.39.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) ICH9 Family USB Universal Host Controller - 2934. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2935. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2936. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2937. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2938. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2939. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
RICOH OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Connected Device Information:
Marks’s iPhone, iPhone 3GS running firmware version 3.1.3
Serial Number: 839412C63NP
** iPhone/iPod touch Sync Tests **
Sync tests completed successfully.
cheers,
mark

Hello I have a few questions and I need some help with my iTunes and iPod

Hello iTunes people.
I have a little problem with my iTunes. I actually almost know nothing about iTunes really. But I have had a 80 gig ipod .. ummm I think it's a iPod classic maybe. A long time ago I just downloaded iTunes. I think one of my tech friends already had put the program onto my PC so I did not even have to download it. Anyways I put my life's collection of mp3's onto iTunes and then syncs it with my iPod and it worked great. Here is my problem. I just recently bought a MONSTER PC. I have lovingly named it " ED209 " I downloaded iTunes for it and I have the most up to date version.8.1.1 is the most current version correct? Ok well here is my problem. What I want to do is I want to put everything that is currently on my iPod ONTO the iTunes library. I DO NOT want to import anything from the library or playlist or whatever you call it ONTO the iPod because there is nothing in the library. Now this is were its gets weird and possibly silly. A person I was chatting with on Facebook sort of made fun of me because she was like " Dude! Just push " Sync " But the reason I am paranoid is because THIS is the message I get....
" The iPod " Aaron's iPod " is synced with another iTunes library. Do you want to erase this ipod and sync with this iTunes library? "
HOLY COW!! That girl on Facebook was making fun of me but READ THAT. That exactly says ERASE the "iPod" and Sync with THIS library " It does not say put what is ON the iPod into THIS Library. It says it the other way around. Clear as day it says it will ERASE the " Ipod " it does not say " Fill the library with whats on your iPod "
Do I all of a sudden not understand English or something???? I know how to freaking read and from what it says is sounds a 100 percent like " we will ERASE youe iPod and put everything from this playist or library onto your iPiod" But there is NOTHING in my library? Am I mentally challenged or what?
I hope someone can help me here and I have another request. Could someone just tell me all the cool things I can do with iTunes and my iPod? I am trying to read the help files and the FAQ and whatever else Apple provides you with but it has SO MUCH crap that looks usless. I find myself reading a whole paragraph about some simple little section of s section of a section of a feature! Know what I mean. Someone give me the long and short of the neat things I can do with this stuff. I have windows Vista with a wicked computer that has like 6 gigs of ram and m iPod is a 80 GB Classic
help !!
PROTEUS

*What I want to do is I want to put everything that is currently on my iPod ONTO the iTunes library.*
1). Connect your iPod to your computer. When you get the message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod.
2). When your iPod appears in the iTunes source list change the update setting to manual, that will let you continue to use your iPod without the risk of accidentally erasing it. Check the "manually manage music and videos" box in Summary then press the Apply button. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default: Managing content manually on iPod and iPhone
3). Once you are connected and your iPod is safely in manual mode there are a few things you can do to restore your iTunes from the iPod. iTunes will only let you copy your purchases directly from an iPod to the computer, you'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
For everything else (music from CDs, other downloads and including iTunes purchases) there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. You can read reviews and comparisons of some of them here:
Wired News - Rescue Your Stranded Tunes
Comparison of iPod managers
A selection of iPod to iTunes utilities:
TuneJack Windows Only (iPhone and iPod Touch compatible)
SharePod Windows Only (iPhone and iPod Touch compatible)
iPod2PC Windows Only
iDump Windows Only
YamiPod Mac and Windows
iPod Music Liberator Mac & Windows
Floola Mac & Windows
iPodRip Mac & Windows (iPhone and iPod Touch compatible)
iPod Music Liberator Mac & Windows (iPhone and iPod Touch compatible)
Music Rescue Mac & Windows (iPhone and iPod Touch compatible)
iGadget Mac & Windows (iPhone and iPod Touch compatible)
iRepo Mac & Windows (iPhone and iPod Touch compatible)
iPod Access Mac & Windows (iPhone and iPod Touch compatible)
TouchCopy Mac & Windows (iPhone and iPod Touch compatible)
There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide
4). Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync.
5). I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay: Back up your iTunes library by copying to an external hard drive

Password and Sync Problem

I ended up chaining my password for my Mobile Me information on me.com. After doing this everything is screwed up. My e-mail and mobileme syncing, I keep getting messages popping up. Need some help.

If thjis is a reproducible problem log a support case with the traces and have them figure it out for you.
WilfredS

Need help with Airport Express and so on.

Ok so my main problem before getting into what I need help with here is that our MacBooks and now my iPhone 6 plus isn't staying online. Keep getting booted off and then I either have to select the network again or it will eventually go back on. If anyone has a solution or so please feel free to answer that as well. I'm running on Roadrunner with a Netgear 600 wireless router and a motorola modem. Both of which I'll leave the link to below for a better look.
My Main Question: So I'm looking at a new wireless router mainly and possibly a new modem. I know Apple products are trustworthy but how good is the Airport Express and other Airport products. Also what is the Maximum speed and Maximum data speed for the cheapest express station and if anyone knows the speeds of the other devices it would be greatly appreciated.

DSL Router to Netgear 5-port Switch and I used the switch to connect to Airport Extreme, TV, Blue-Ray DVD player and DirecTV Receiver.
The AirPort Extreme base station (AEBS) is a router so it will do what you need.
You need to reconfigure your setup. Connect the WAN port of the AEBS to the DSL router. Then connect the Netgear switch to one of the LAN ports on the AEBS. The AEBS will properly share the connection.

Help with "gapless plaayback " and "syncing" problems

Similar Messages

Maybe you are looking for