Help with Gateway TG799 Firewall settings Please
We have a Telstra Gateway Max TG799vac.
We have recently acquired our own domain name and have setup up an online store on Shopify.
So the underlying web address (on myshopify.com) is not the same as our URL of the shop.When we try to access the new site from any computer or device from within our house
we are blocked 90% of the time. It occasionally will connect. We are therefore unable to do admin on our own site.
I have tried USB tethering thru my phone's data and works 100% no worries. This bypasses the gateway and Telstra of course.
Anyone outside our home can always connect no worries.I have suspected the Firewall in the gateway TG799 device.
So I went into settings and changed the firewall setting down to the LOW setting.
Then we can connect all the time.
When in NORMAL or HIGH then we get this intermittent (mostly failed) connection.
After this experiment I am convinced it has something to do with the internal firewall.There is also a USER DEFINED section where you can set your own firewall rules
but I don't know enuff about what to do in there to experiment.
But I think I could set up a rule in there to allow this site to work for us if I knew how to go about it.I have been unable to find anyone within the normal Telstra tech help line who can help with this.Does anyone on here have any such knowledge or can give me a pointer where I can read/learn about how to do this for myself.Any help will be greatly appreciated.
Thanks Steph,The fact that these devices are updated by Telstra remotely without our prior knowledge explains alot.It explains why the problem I first reported just started to happen out of the blue.It also explains why it just as mysteriously disappeared. It also explains why we suddenly had trouble with our phones dropping the wifi connection constantly.And why that suddenly fixed itself as well. It also explains why we suddenly got a monstrous over-use on our data bill on our Telstra mobile.We thought we were safe in our own house to use data on this phone knowing it was connected to our wifi and therfore our BigPond plan. What we did not know was that the phone was loosing sync with the wifi and therefore dropping back to 3G plan data use without our knowledge. My wife had been using her phone to connect to a Chinese movie streaming site and of course when the wifi dropped out she did not know she was streaming thru her 3G plan. Massive unexplained data over-use resulted. I had a rough time convincing your billing organisation that we were using wifi (or thought we were anyway) for the movies and they would not believe us therefore the monster bills were upheld. We did not reaslise until far too late that the phone was loosing the wifi connection without us knowing. We have stopped using that service now and as soon as the credit we accumulated with the associated billing stuff-ups is used up we will be leaving Telstra for another less troublesome provider. How about giving us poor defenseless users some notice that our devices have been updated and a summary of what aspects have been changed. Just like happens with apps on the Google Play store. I will now be approaching your billing organisation once more armed with this knowledge. My argument will be that our over-use on 3G data stemmed from a bad firmware update without our knowledge in your modem causing us to over-use 3G data we were not aware of. This time if they don't listen then it will be time for a complaint to the TIO. And perhaps even a media story. Disgusting service! And one angry Telstra customer.
Similar Messages
-
Help with most practical format/settings please!
Hi Everyone out there!
I'd really appreciate some spelled-out advice as I have only ever used FCP with a DV Pal camera for high end stuff and thus also known how to set a sequence up and capture stuff but only for that format!
Right!
I have been supplied a batch of 40 small video clips taken from a photo camera. They were MPEG 1 muxed, and I have demuxed them with Mpeg streamclip.
They are:
Video: 224 Mpeg 1, 640x480, 30fps, 8Mbps
Audio: 160 Pcm stereo, 32khz, 1.02Mpbs
I have been asked to edit a little promo film out of them and then export it suitable for uploading to facebook / use on the web. I can't seem to find out what settings are optimum for facebook uploading seeing as I want to retain as much quality as possible given the initial format supplied in!
Any help advice would be appreciated. Basically I'm trying to work out exactly what setup the project/sequence should be in. Easy setup doesn't seem to make much sense and I've tried a few settings but each time I start putting clips in the sequence they have to be rendered before playing which makes making this thing a nightmare!
Thanks
Hannah
Message was edited by: Hannah MadsenI'd save them out as DV .mov's Edit in a dv easy set up. From there you can compress into whatever it is that facebook likes. Sorry, I've no idea about that. Never even visited it.
-
Help with Adobe.premiere.elements12. Please
It would appear under the organizer tab that the photos are organised in the lowest folder in the folder structure within Windows Explorer. How can I use the Windows Explorer structure to organise the photos within Elements.In a situation such as yours, I tend to consolidate items into folders so I have folders of nice workable numbers of images, somewhere between 20 and 200 images. Now, whatever, once you've imported, do your moving within LR, not the OS! I will select all in a folder and drag into a folder a level or two or three above, and then delete the newly empty subfolders. I hope this helps a bit!
Once you've reached just new Imports of camera output, you'll be flying along. -
Please help with highest quality export settings...
I have searched the forum and web for hours (no joke!) and I am still trying to figure out what are the best video settings to give me the highest HD quality video in daylight. I am using a Canon HF200 and the latest updated version of FCE. My problem is that I am unable to produce an HD quality video at 1920 x 1080 Full HD without being "jagged". I have two questions; what do you suggest to be the best FCE import and export settings to produce the best HD video, and what settings do you have your HF200 set to (for normal daylight conditions), to produce the best HD video file? The file will be played directly thru my computer to a plasma HDTV.
I have tried several settings, but using anything above 1280x720 16:9, makes the video "jagged". Again, I don't care about the size of the file or how long it takes, I just want the best. Is there something I am missing?
My FCP settings are the following:
I log and transfer the video from the camera into FCP (on a black MacBook; 2.16 GHz with 4 GB RAM) using the AVCHD Apple Intermediate Codec 1920 x 1080i source. I then export the video using the following:
Export using "Quicktime Conversion".
Quicktime options video settings are:
Frame Rate set to "Current"
Key Frames set to every "24" frames
Compressor quality: "best" (Encoding set to "best quality")
Data Rate set to "automatic"
Quicktime options video size are:
"HD 1280 x 720 16:9" (anything higher produces the jags!)
Deinterlace source video is NOT checked
My Canon HF 200 settings are the following:
- P mode
- FXP (17 Mbps)
- 60i framerate
all others are set to the normal default
I have read some reports saying the above is good and others suggesting changing FXP to MXP (24 Mbps) and/or the framerate from 60i to PF30. I don't care about the size of the file, I just want the highest quality HD file.
Any suggestions for the best FCE settings and/or HF200 settings would be very much appreciated!
Thanks for your help,
EvanThanks again for the feedback
Let me try my best to answer the above (I'm new at all this and I appreciate you guys taking the time to try and help me out).
First off, I tried rendering and that did not help.
Here is my sequence. I am not going into FCE from the camera directly. I have archived the video file from the camera using iMovie (as well as just making an exact copy of the camera files; they both appear to me to be the exact same, both can be logged and transferred into FCE, and both files give me a jagged FCE result).
Once I log and transfer the file(s), I then take the clip and add it to a sequence file (rendering or not rendering the clip(s) at this point does not make a difference), and then click/highlight the sequence file in the browser and export it.
As for "editing the video in a 1920x1080i60 sequence", I think I am. I am not doing any editing to the clip. It is logged and transferred using the AVCHD Apple Intermediate Codec 1920 x 1080i and then exported using either as a Quicktime Movie or Quicktime Conversion (set for 1920 x 1080 using H.264 compression; both ways still result in a jagged video).
That's about it...log and transfer, add clip to sequence, and then export sequence...
I hope this answers the above, but if not, I apologize; I'm still learning!
Also, if I use iMovie, with similar export (share) settings, I get a non-jagged video (I have tried with deinterlacing and not deinterlacing, and both video results are fine)
Thanks again,
Evan -
Need some URGENT help with 3 DVD mastering issues PLEASE! :
Hi there,
Firstly, I am running DVD SP 3.0.2 on Mac OS 10.4.7 on a G5 Dual 2 GHz 3Gb Ram plenty of HD space...
I am creating a DVD with: An intro sequence, a main menu, 4 sub menus, and 4 sections with around 12 chapters each.
I am having some big problems, and a pretty stuck. I will lest them separately below, numbered. If you are able to help, please refer clearly to which number you are helping with. Any help is MUCH appreciated! Many thanks!!
1. Each of the 5 menus (1 main, 4 sub) have a background video, and a separate audio track. I added the background videos by simply dragging them to the assests panel, then from there onto the menu editor window. They are created in FCP and are properly encoded. However, when I click the motion button, or use the simulator, the videos do not show up. The music plays, but all i see is plain black.
What is going on?!?!?!
2. I am really struggling with rollover buttons. I have custom created buttons, and I wand them to have a soft red glow around them when hovered over. HOW ON EARTH DO I ACTUALLY DO THIS??
The buttons are in photoshop so can be exported with/without background/glow in any format.
3. Is it possible, once I have got the above rollover working, to have an image to the right hand side of my buttons which changes with the the button rollover. i.e. hover over button 1, see image 1. hover over button 2, image changes to image 2.
PLEASE PLEASE give any help you can, I have a deadline coming up and am quite stumped. Thanks again!!I am still having problems regarding issue Number 1. PLEASE ANYONE HELP?!
Sorry, I'm not sure about the motion menus. I avoid those whenever possible. But you might click on the menu in the storyline tab (whatever it's called -- the hierarchical view with the disc, tracks, slideshows, etc.) and look at the properties and see if there's anything you have to enable specifically for motion. And be sure the motion button is on on the main display/preview area, but it sounds like you already know how that works.
For your information, here is a screen grab of the menu I am trying to create:
http://www.redhavoc.co.uk/stuff/menu.jpg
I think it is obvious that when a button is hovered over, I want it to glow red, and the image to the right will change to match the respective button.
IS THIS GOING TO BE POSSIBLE????
Yes.
First, your menus have to be layered menus. Unfortunately, there's no way to convert non-layered menus to layered menus, so if you already have non-layered, you'll have to just delete them and create new layered menus. The button (and menu item) to create a layered menu should be right by the normal new-menu item.
Next, the graphical work is all in Photoshop.
Side tip: You may already know this, but I found it's best to use 640x480 for the Photoshop document. When I do text and leave it as a text object in the Photoshop file, it resizes poorly in DVDSP. So this ends up being another 720x480 vs. 640x480 square/rectangular pixel conversion thing. DVDSP plays in the 640x480 world, at least as far as the designer can see. So I keep my images at 640x480, and it doesn't have to resize, and everything looks right.
Moving on... Set up your basic background, the part that won't change (or will have other things covering it, like for your square image).
Then put in all the buttons and images you'll be using, each part in a separate layer. This could have fifteen buttons (you have five buttons, and there can be three versions for each -- inactive, selected, and activated versions) and five or six square images (you said one for each button, and you might want a blank default if, say, you want to add a "back" button on the menu and want some blank or default image for the square when they're on the "back" button).
Sometimes people don't bother with a separate "active" button state, but you usually want some visual feedback that they clicked the button. Also, I usually just build the default (unselected) button into the background; that's less hassle later on, and it will just draw the selected or activated buttons over that when the user is on that button.
Line up all your buttons and images. All the square images lined up perfectly on top of each other, all the buttons in the right places (so you'll have three buttons stacked on top of each other in each spot). Give each layer a short but quickly recognizable name, and line them up in a consistent order. (button1-default, button1-selected, button1-active, button1-squarepicture, then button2-default, ... etc.) Photoshop and DVDSP don't care, but it makes it easier for you later.
Note that earlier versions of DVDSP won't show Photoshop layer effects. (They handle layers, just not the effects, like inner glow, outer bezel, etc.) I don't remember when they changed this, but I think it was version 4.something. So if you're using that method to make your buttons glow, you may have to flatten each selected or active button layer, and you may even need to create a dummy blank layer underneath it first to give it something to flatten onto.
Save the file as a standard Photoshop file (.psd). Drag the file onto your DVDSP layered menu and set it as the background.
Now, in DVDSP, create all your buttons. Just drag boxes over/around the button pictures you have. Feel free to make them extra-big; users won't see the actual area you've selected, and bigger areas makes it easier for people to hit them if they're using a mouse on a computer to watch the DVD. You can point the buttons to their targets now if you want, and set the end jumps on the tracks if you want. (I tend to set the end jumps on the tracks so they automatically select the button for the next track.)
Now's the fun part, since it will actually hook everything up and should be easy if your naming layer order were consistent. Click on the layered menu (in that hierarchical view) and look at the properties window. (Sorry I can't remember the technical names for all these windows; I'm doing this all from memory. So feel free to ask more questions if you can't find what I'm talking about.) One of the properties tabs should have a grid of checkboxes with a list of your layers. Make sure the background is checked for all of the states. Then check the layers you want to show for each button state, as well as the corresponding square image to show for each.
Again, I'm doing this from memory, and I can't remember exactly how things are listed in that grid. But I remember it keeps your layers in the same order you put them in the Photoshop file and shows you those names, so it should make it easy to go down the list and check the right boxes.
And another side tip: You can update the Photoshop file, but once you've put it in DVDSP, if you change the layer order, it will screw up the check boxes you checked. It always shows you the layer names correctly, but it keeps the checkboxes in DVDSP simply assigned to the layer number, so the fifth layer will keep the same checkboxes even if you juggle them so some other layer is now the fifth layer. So if you do juggle the layers in Photoshop, go back and fix the checkbox list in DVDSP.
I put a sample Photoshop file based on yours in
http://dan.black.org/layered-menu-sample.psd
It's quick and dirty, but shows the layer layout, and you should be able to drop it on DVDSP to play with. (I also won't leave it there forever, maybe a few weeks, so anybody reading this in a month or more probably will get a 404 for that url.)
Again, doing this from memory, so feel free to ask if anything doesn't work or doesn't make sense.
G4/dual867 Mac OS X (10.4.5) 2GB/0.8TB -
Help With Crash Code In PRE8 Please
In an interest to turn some of my recent discussions in a more positive direction and in keeping with the primary function of this forum (seeking advice and solutions) and in a further effort to not continually ***** about PRE8, can someone please help with and interpret the following crash codes recently generated by PRE8?
Thanks in advance for any help.
Glenn
Description
A problem caused this program to stop interacting with Windows.
Problem signature
Problem Event Name: AppHangXProcB1
Application Name: Adobe Premiere Elements.exe
Application Version: 8.0.0.0
Application Timestamp: 4aa5c87c
Hang Signature: ba8e
Hang Type: 32
Waiting on Application Name: ElementsOrganizerSyncAgent.exe
Waiting on Application Version: 8.0.0.0
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1033
Additional Hang Signature 1: cb0b340a390054264815ceb8e3574d53
Additional Hang Signature 2: 84f3
Additional Hang Signature 3: f0a90877ec38c16fd285cc410c83433d
Additional Hang Signature 4: ba8e
Additional Hang Signature 5: cb0b340a390054264815ceb8e3574d53
Additional Hang Signature 6: 84f3
Additional Hang Signature 7: f0a90877ec38c16fd285cc410c83433d
Extra information about the problem
Bucket ID: 749899167
Description
A problem caused this program to stop interacting with Windows.
Problem signature
Problem Event Name: AppHangXProcB1
Application Name: Adobe Premiere Elements.exe
Application Version: 8.0.0.0
Application Timestamp: 4aa5c87c
Hang Signature: ba8e
Hang Type: 32
Waiting on Application Name: ElementsOrganizerSyncAgent.exe
Waiting on Application Version: 8.0.0.0
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1033
Additional Hang Signature 1: cb0b340a390054264815ceb8e3574d53
Additional Hang Signature 2: 84f3
Additional Hang Signature 3: f0a90877ec38c16fd285cc410c83433d
Additional Hang Signature 4: ba8e
Additional Hang Signature 5: cb0b340a390054264815ceb8e3574d53
Additional Hang Signature 6: 84f3
Additional Hang Signature 7: f0a90877ec38c16fd285cc410c83433d
Extra information about the problem
Bucket ID: 749899167
Description
A problem caused this program to stop interacting with Windows.
Problem signature
Problem Event Name: AppHangXProcB1
Application Name: Adobe Premiere Elements.exe
Application Version: 8.0.0.0
Application Timestamp: 4aa5c87c
Hang Signature: ba8e
Hang Type: 32
Waiting on Application Name: ElementsOrganizerSyncAgent.exe
Waiting on Application Version: 8.0.0.0
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1033
Additional Hang Signature 1: cb0b340a390054264815ceb8e3574d53
Additional Hang Signature 2: 84f3
Additional Hang Signature 3: f0a90877ec38c16fd285cc410c83433d
Additional Hang Signature 4: ba8e
Additional Hang Signature 5: cb0b340a390054264815ceb8e3574d53
Additional Hang Signature 6: 84f3
Additional Hang Signature 7: f0a90877ec38c16fd285cc410c83433d
Extra information about the problem
Bucket ID: 749899167
Description
A problem caused this program to stop interacting with Windows.
Problem signature
Problem Event Name: AppHangB1
Application Name: Adobe Premiere Elements.exe
Application Version: 8.0.0.0
Application Timestamp: 4aa5c87c
Hang Signature: af71
Hang Type: 0
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1033
Additional Hang Signature 1: 37a5e7ba79ac8a533571e7d8f2e8acd0
Additional Hang Signature 2: d900
Additional Hang Signature 3: 431be4795d1c061aba02734aa57c4950
Additional Hang Signature 4: af71
Additional Hang Signature 5: 37a5e7ba79ac8a533571e7d8f2e8acd0
Additional Hang Signature 6: d900
Additional Hang Signature 7: 431be4795d1c061aba02734aa57c4950
Extra information about the problem
Bucket ID: 811067413
Description
A problem caused this program to stop interacting with Windows.
Problem signature
Problem Event Name: AppHangB1
Application Name: Adobe Premiere Elements.exe
Application Version: 8.0.0.0
Application Timestamp: 4aa5c87c
Hang Signature: 7008
Hang Type: 0
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1033
Additional Hang Signature 1: f0af3d01fb74f43241231d4e61778ffa
Additional Hang Signature 2: 0fb3
Additional Hang Signature 3: a5f1d311bc7bfa26f067b42cbdeac6af
Additional Hang Signature 4: 7008
Additional Hang Signature 5: f0af3d01fb74f43241231d4e61778ffa
Additional Hang Signature 6: 0fb3
Additional Hang Signature 7: a5f1d311bc7bfa26f067b42cbdeac6af
Extra information about the problem
Bucket ID: 781893170Here are my system specs. Let me know if you need anything else.
Thanks
Glenn
Operating System
MS Windows Vista Ultimate SP2
Installation Date: 06 March 2009, 02:58
Intel Mobile Core 2 Duo T9550
Cores 2
Threads 2
Name Intel Mobile Core 2 Duo T9550
Code Name Penryn
Package Socket P (478)
Technology 45nm
Specification Intel Core2 Duo CPU T9550 @ 2.66GHz
Family 6
Extended family 6
Model 7
Extended model 17
Stepping A
Revision E0
Instructions MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, EM64T
Bus speed 266.0 MHz
Rated Bus speed 1064.0 MHz
Stock core speed 2666 MHz
Stock bus speed 266 MHz
Average Temperature 36 °C
Cache
L1 data cache size 2 x 32 KBytes
L1 instructions cache size 2 x 32 KBytes
L2 unified cache size 6144 KBytes
Core 1
Core speed 1596.0 MHz
Multiplier x 6.0
Bus speed 266.0 MHz
Rated Bus speed 1064.0 MHz
Temperature 37 °C
Thread 1
APIC ID 0
Core 2
Core speed 2660.0 MHz
Multiplier x 6.0
Bus speed 266.0 MHz
Rated Bus speed 1064.0 MHz
Temperature 36 °C
Thread 1
APIC ID 1
Memory
Type DDR2
Size 4096 MBytes
Channels # Dual
DRAM frequency 399.0 MHz
CAS# Latency (CL) 6.0 clocks
RAS# to CAS# delay (tRCD) 6 clocks
RAS# precharge (tRP) 6 clocks
Cycle time (tRAS) 18 clocks
SPD
Number of SPD modules 2
Slot #1
Type DDR2
Size 2048 MBytes
Manufacturer Hyundai Electronics
Max bandwidth PC2-6400 (400 MHz)
Part number HYMP125S64CP8-S6
Serial number 00007112
Week/year 52 / 08
SPD Ext. EPP
JEDEC #3
Frequency 400.000000 MHz
CAS# latency 6.0
RAS# to CAS# 6
RAS# Precharge 6
tRAS 18
tRC 24
Voltage 1.8 V
JEDEC #2
Frequency 333.333344 MHz
CAS# latency 5.0
RAS# to CAS# 6
RAS# Precharge 6
tRAS 16
tRC 21
Voltage 1.8 V
JEDEC #1
Frequency 266.666656 MHz
CAS# latency 4.0
RAS# to CAS# 4
RAS# Precharge 4
tRAS 12
tRC 16
Voltage 1.8 V
Slot #2
Type DDR2
Size 2048 MBytes
Manufacturer Hyundai Electronics
Max bandwidth PC2-6400 (400 MHz)
Part number HYMP125S64CP8-S6
Serial number 02008065
Week/year 52 / 08
SPD Ext. EPP
JEDEC #3
Frequency 400.000000 MHz
CAS# latency 6.0
RAS# to CAS# 6
RAS# Precharge 6
tRAS 18
tRC 24
Voltage 1.8 V
JEDEC #2
Frequency 333.333344 MHz
CAS# latency 5.0
RAS# to CAS# 6
RAS# Precharge 6
tRAS 16
tRC 21
Voltage 1.8 V
JEDEC #1
Frequency 266.666656 MHz
CAS# latency 4.0
RAS# to CAS# 4
RAS# Precharge 4
tRAS 12
tRC 16
Voltage 1.8 V
Mother Board
Manufacturer Dell, Inc.
Model 0P786H
Version A04
Chipset vendor Intel
Chipset model PM45
Chipset revision 07
Southbridge vendor Intel
Southbridge model 82801IM (ICH9-M)
Southbridge revision 03
BIOS
Brand Dell Inc.
Version A04
Date 11/26/2008
Monitor
Name Generic PnP Monitor on ATI Mobility Radeon HD 3650
State enable
State primary
Monitor Width 1920
Monitor Height 1200
Monitor Bit 32
Monitor Frequency 60
Device: \\.\DISPLAY1\Monitor0
Name Default Monitor on ATI Mobility Radeon HD 3650
State disabled
State removable
Monitor Width 800
Monitor Height 600
Monitor Bit 32
Monitor Frequency 60
Device: \\.\DISPLAY2
ATI Mobility Radeon HD 3650
GPU M86
Device ID 1002-9591
Subvendor Dell (1028)
-
Need help with the noise reduction settings
Hi,
After som experimenting I need some help with the settings for noise reduction.
I just edited and converted a few pictures from RAW (D200) til 8-bit TIFF. Opend the file up in photoshop and was shocked to see the amount of noise in the pictures. I then exported the RAW-files and did the same conversion in Capture One 3.7.3 - The result is a lot better regarding noise. In capture One I'm using the noise reduction step before "High".
Can you share your experience with the optimal settings for best noise removal ?
Thanks in advance,
fbrosei use it once in a while, but i play around with the sliders in full screen mode and at 100% and then see what the sliders do. I don't have a definite procedure that I can suggest though.
-
I NEED SOME HELP WITH UPDATING MY IPOD TOUCH PLEASE
i need some help with my ipod the version is 3.1.3 and every time I'm trying to update it says it can not be restored then it says unknown error so i need some help updating my ipod to version 4.2
If you mean you're trying to update your ios go to settings/general/software update. then you should see the latest ios just tap it and it will automatically update your ipod. If you're trying to restore your ipod (as it's not quite clear in your query) try doing it through itunes instead of on the device itself
-
Idiot needs help with hanging mac book pro please
can anyone please help me
i have a 13 inch 2013 macbook pro but since yesterday every 30/40 seconds if im trying the spinner circle thing comes up and even now I'm trping faster than my mac can keep up
iv installed nothing recently
im really stuck where to go from here
really sorry if I'm vague but I'm not a computer genius
if all fails then i have to take it back to apple
thanks for any helpEtreCheck version: 2.1.5 (108)
Report generated 3 January 2015 17:53:58 GMT
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.9 GHz Intel Core i7 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 2:36:51
Disk Information: ℹ️
TOSHIBA MK7559GSXF disk0 : (750.16 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 748.93 GB (635.73 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 749.30 GB Online
MATSHITADVD-R UJ-8A8 disk2 : (329.8 MB)
disk2s1 (disk2s1) <not mounted> : 287 MB
disk2s1s1 (disk2s1s1) <not mounted> : 32 KB
Untitled Disc (disk2s1s2) /Volumes/Untitled Disc : 286 MB (0 B free)
USB Information: ℹ️
Western Digital External HDD 160.04 GB
WD USB 2 (disk3s1) /Volumes/WD USB 2 : 160.04 GB (64.46 GB free)
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[loaded] com.divx.dms.agent.plist [Support]
[loaded] com.divx.update.agent.plist [Support]
[invalid?] com.oracle.java.Java-Updater.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[invalid?] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.tunabellysoftware.TGFanHelper.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[loaded] com.divx.agent.postinstall.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Google Drive Application (/Applications/Google Drive.app)
Safari Application (/Applications/Safari.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 3.0.0.126 - SDK 10.8 [Support]
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
DivXBrowserPlugin: Version: 2.2 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
OVSHelper: Version: 1.1 [Support]
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.1.0 [Support]
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
Safari Extensions: ℹ️
DivX Plus Web Player HTML5 <video> [Installed]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Flip4Mac WMV [Support]
Perian [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
19% Finder
2% WindowServer
0% AppleSpell
0% DesktopServicesHelper
0% mds_stores
Top Processes by Memory: ℹ️
429 MB iPhoto
198 MB Finder
180 MB iTunes
144 MB com.apple.WebKit.WebContent
112 MB mds_stores
Virtual Memory Information: ℹ️
1.97 GB Free RAM
4.26 GB Active RAM
1.32 GB Inactive RAM
1.03 GB Wired RAM
3.49 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Jan 3, 2015, 03:18:42 PM Self test - passed
Jan 1, 2015, 02:04:03 PM /Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2015-01-01-140403_[ redacted].cpu_resource.diag [Details] -
Help with MM_editCmd.CreateParameter insert syntax please
In the past (I guess older ASP version maybe?), the
automatically generated code that DW created using the "insert
record" wizard allowed for easy editing and debugging within the
SQL. I just installed CS3 and created a similar page and the code
used to build the insert statement is quite different.
Unfortunately, I'm not versed well enough in it yet!
I can see how the SQL insert is being built:
Set MM_editCmd = Server.CreateObject ("ADODB.Command")
MM_editCmd.ActiveConnection = MM_wp_STRING
MM_editCmd.CommandText = "INSERT INTO test (FName, LName,
Company, Email, BPhone, BFax, MPhone, Props, regDate, Password,
MBroker, MBID, Status, ARID) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?,
MM_editCmd.Prepared = true
...and then it appears to uses some scripting functions to
build the values and replace the ?'s in the CommandText line:
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param1", 202, 1, 255,
Request.Form("FName")) ' adVarWChar
What I'm struggling with is the values inside each Append
line (202, 1, 255) and what the relate to AND more importantly, how
I can insert my own variable here instead of the form field data.
ex:
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param1", 202, 1, 255, StrMyStringValue)
' adVarWChar
I need help with the syntax. Would it be different if the
variable holds a number value vs. text (assuming the field it's
being inserted into hold numbers)
Also, i USED to be able to add a handly little Response.Write
before the execute insert line that would write the SQL insert
statement to the screen and stop so that I could SEE where the
issues were. I've tried:
Response.Write(MM_editCmd.Parameters)
Response.Write(MM_editCmd.CommandText)
Just can't get the SQL text to display. Is the SQL insert
statement not stored as a variable that i can call?
Thanks VERY much for any help!You can use the concatenate() function to build up your string, as you no doubt know.
As far as the wildcard goes ... your intention must be to try to SET the call variable and later on test the call variable with an IF node. Is that right?
You would be able to test parts of the string using the substr() function - which is based on character position. If that is a fixed value that you know, it's easy. If it's not, you can first use the find() function to locate something (like the "_9"), returning the position, and then use the substr() function to pull it off.
Can you write some pseudo-code here to define exactly your intention? You can set up a dummy script and send a dummy call through using Call Tracer and watch the output to see how your code is working.
Regards,
Geoff -
Need some help with security sandbox stuff asap please
hey guys... so im trying to do a swfLoader call to a swf on a server from my actionscript on my local machine, when i do that i get the security sandbox violation error.... i tried adding a crossdomain.xml file to the server that has the following code in it
<cross-domain-policy>
<site-control permitted-cross-domain-policies="master-only"/>
<allow-access-from domain="*"/>
<allow-http-request-headers-from domain="*" headers="SOAPAction"/>
</cross-domain-policy>
and in my actionscript on application initialize i do
initialize="init(); Security.loadPolicyFile('http://myServer.com/crossdomain.xml')"
i also do
Security.allowDomain("http://myServer.com");
any ideas???? oh and i also went to this website http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04a.ht ml and set the always allow trust locations to "/"
any ideas on how i could possible fix this problem?? ive been trying to get around this problem for the last 2 days!!
please help!!!!Hi,
Please use policy file logging to check the exact error. This should shed some light on the problem.The procedure is detailed here.
http://www.adobe.com/devnet/flashplayer/articles/fplayer9_security_05.html
Nishad -
Help with java translator...PLEASE!!!
I am currently in the process of learning the JAVA language.
i am having real problems tackling a question about programming a translator, can anyone help with this question?
- Write a Java class 'German' to model the german dictionary(using only a few phrases, say 4-5). You will need to choose an appropriate representation for the constant dictionary(ignore accents etc), and to provide a method 'Translate' that, given an English phrase, returns the corresponding German phrase. You must also deal with phrases that are not available.
I hope someone can help...
JohnLearn a Map structure.
-
I need help with some technical YouTube Settings, third party tools page
How can I add ios mobile Safari, back to my google + third-party tools page? I updated my ipad 2 to ios7 and could no longer upload videos to youtube for my blog. YouTube had been saying unrecognized file type because it's not longer compatible with ios mobile photos app.
I went into settings via the google/youtube help files and removed some old stuff from the third party apps, like blogger-an inactive blog and obviously deleted the ios moblie too that was right underneath blogger. tried jumping through their hoops, add a phone number, verify your account, lengthen your video time, add 2 step verification (which was horrible and I went back in and removed it), add a password for ipad, etc.
They (youtube/google??) have been working on stuff because there is all kinds of new things the second day I tried to figure this out via their help/redirect links. ios mobile was there before and now it's gone, even though I did not choose/select it. But I have noticed that the ipad screen is much more sensitive than it was before the ios7 update. I don't even have to touch the screen for some things, it accepts and goes on it's own while my finger is hovering over the screen.
ipad2
ios7.0.2
Safari
YouTube
Google+The Title of my post, should really be....I have ipad2 with ios7.0.3 and Safari, I can't upload videos to YouTube because of Google? or ios7?
It's now November 1st. LOL 53 folks have read my problem and it only gets better. I pleaded with Google/YouTube via Feedback form (because they are one and the same now) to please add ios mobile back to Google 3rd party apps and after checking every single day, someone finally added it back for me. Yay! Then I asked if I needed to "revoke" Google+ in the 3rd party apps because some of the help files suggested Google+ is attached to your YouTube channel and might affect uploading of videos? For the life of me, I could not figure out how to get it off my YouTube channel. And the help files didn't take me to a place to change it. Upon checking 3rd party apps, I could no longer find the page they were on, and the Google+ app icon now goes no where.
Hey, but there are new menus with all kinds of statistics now about your account, like how many subscribers you have, what the average number of minutes people watch your videos,etc. Hmm... so I tried uploading a video and it worked. I got the message that ios7.0.3 with bug fixes was available a few days ago and updated to that. I'm back to, no longer upload videos, yesterday it was still freezing on the upload screen, where you add the title of your video and all of the specs, it appears to be half uploaded with a solid blue bar half way and goes no where. I have to close the app after an hour or more. I have rebooted a couple of times every day. Today it says, we could not upload your video, we did not recognize the format of this file. And when I go to YouTube and can see all of my videos, my subscriptions, I can not remove the videos that tried to upload, they are blank gray squares. A few days ago I could edit them out. I guess they are still working on it. These are the same self recorded videos, that I have been uploading for a year, same ipad. I have sent feedback to Google/YouTube once again.
I'm completely at their mercy. I have yahoo mail, so I can't send my videos via email, even though my channel has a special email address to send videos to for upload. Yahoo will not send a video more than a minute or so. I created an AT&T email address today, and it's the same there, will not send a 15 minute video. The upload link on YouTube no longer works, there on the same page with your special email address to mail your videos in, even though there is no email that supports a 15 minute video. My husband suggested video compressing program. I have not tried to upload from a PC, I do have icloud, so that may be my next route. Other forums say they/Google/YouTube are fully aware of it and are working on it. Still 30+ days in...
It's a shame these companies can't work together, it's a shame that there is no answer, because we all have these devices we spent hundreds of dollars on and want them to work. I have been searching the web for 30+ days and no one knows the answer. Hard to believe I'm the only person having this ipad issue. -
Help with regards to customize settings
Dear sir i am unable to print on customize settings after 3 times printing,the issue is that when i customize my settings i will get print 3 times on my given setting but after that the printer comes to default settings and print a single page and with default configured darkness,The whole issue is regard with copier.Provide me assistance as soon as possible.Thanks to someone who is concerned.
,Welcome to the Forums! I saw your post about the troubles you're having with setting custom sizes and having them stay permanently in your settings. I will do my best to help you. Please start with telling me what exact custom sizes, or settings you are selecting to use, and which program you are using. Also try Uninstalling the Printer Software, restarting your PC, and then reinstall the printer by running the HP Printer Install Wizard for Windows. Try your custom sizes again! Please check the specifications sheet for your LaserJet M126nw to make sure you are using supported sizes for this model: HP LaserJet Pro MFP M125 and M126 Printer Series Product Specifications Good luck
-
Help with an imac crash report please.
My mac suddenly started randomly restarting with the usual error messages today. Could someone please take a look at the latest crash report and let me know what is causing the problem please... here is the report (pretty long);
Process:
WiFiAgent [476]
Path:
/System/Library/CoreServices/WiFiAgent.app/Contents/MacOS/WiFiAgent
Identifier:
WiFiAgent
Version:
1.0 (1)
Code Type:
X86-64 (Native)
Parent Process:
launchd [1]
Responsible:
WiFiAgent [476]
User ID:
0
Date/Time:
2014-11-14 16:45:27.293 +0200
OS Version:
Mac OS X 10.10 (14A389)
Report Version:
11
Anonymous UUID:
1306F36F-43C5-B286-4F56-BE73337F6619
Time Awake Since Boot: 190 seconds
Crashed Thread:
0 Dispatch queue: com.apple.main-thread
Exception Type:
EXC_BAD_INSTRUCTION (SIGILL)
Exception Codes:
0x0000000000000001, 0x0000000000000000
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 libicucore.A.dylib
0x00007fff840cc907 u_charDigitValue + 5
1 com.apple.Foundation
0x00007fff92b2a5d5 -[NSString floatValue] + 93
2 com.apple.AppKit
0x00007fff8c149da6 +[NSUIHeartBeat initialize] + 86
3 libobjc.A.dylib
0x00007fff8df7dc49 _class_initialize + 649
4 libobjc.A.dylib
0x00007fff8df8c99e lookUpImpOrForward + 179
5 libobjc.A.dylib
0x00007fff8df781ac objc_msgSend + 236
6 com.apple.AppKit
0x00007fff8c1494e9 -[NSApplication updateWindows] + 102
7 com.apple.AppKit
0x00007fff8c48676f __38-[NSApplication setWindowsNeedUpdate:]_block_invoke2508 + 76
8 com.apple.CoreFoundation
0x00007fff8d554d87 __CFRUNLOOP_IS_CALLING_OUT_TO_AN_OBSERVER_CALLBACK_FUNCTION__ + 23
9 com.apple.CoreFoundation
0x00007fff8d554ce0 __CFRunLoopDoObservers + 368
10 com.apple.CoreFoundation
0x00007fff8d546de8 __CFRunLoopRun + 872
11 com.apple.CoreFoundation
0x00007fff8d546838 CFRunLoopRunSpecific + 296
12 com.apple.HIToolbox
0x00007fff8655d43f RunCurrentEventLoopInMode + 235
13 com.apple.HIToolbox
0x00007fff8655d0be ReceiveNextEventCommon + 179
14 com.apple.HIToolbox
0x00007fff8655cffb _BlockUntilNextEventMatchingListInModeWithFilter + 71
15 com.apple.AppKit
0x00007fff8c146821 _DPSNextEvent + 964
16 com.apple.AppKit
0x00007fff8c145fd0 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 194
17 com.apple.AppKit
0x00007fff8c139f73 -[NSApplication run] + 594
18 com.apple.AppKit
0x00007fff8c125424 NSApplicationMain + 1832
19 libdyld.dylib
0x00007fff858a45c9 start + 1
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0 libsystem_kernel.dylib
0x00007fff90d7122e kevent64 + 10
1 libdispatch.dylib
0x00007fff91e84a6a _dispatch_mgr_thread + 52
Thread 2:
0 libsystem_kernel.dylib
0x00007fff90d70946 __workq_kernreturn + 10
1 libsystem_pthread.dylib
0x00007fff91e464a1 start_wqthread + 13
Thread 3:
0 libsystem_kernel.dylib
0x00007fff90d70946 __workq_kernreturn + 10
1 libsystem_pthread.dylib
0x00007fff91e464a1 start_wqthread + 13
Thread 4:
0 libsystem_kernel.dylib
0x00007fff90d70946 __workq_kernreturn + 10
1 libsystem_pthread.dylib
0x00007fff91e464a1 start_wqthread + 13
Thread 0 crashed with X86 Thread State (64-bit):
rax: 0x000000000000ffff rbx: 0x0000000000000000 rcx: 0x000000000000ffcf rdx: 0x00007fff92e15ed0
rdi: 0x00000000bfbfbfff rsi: 0x00007fff5a34c3d6 rbp: 0x00007fff5a34c4c0 rsp: 0x00007fff5a34c388
r8: 0x0000000000000000 r9: 0x00000000fffffffe r10: 0x0000000000000003 r11: 0x00007fff8d545960
r12: 0x000000000000ffcf r13: 0x00007fa0e1c7a7e0 r14: 0x00007fff5a34c454 r15: 0x00007fff5a34c450
rip: 0x00007fff840cc907 rfl: 0x0000000000010206 cr2: 0x00007fff74ce3d50
Logical CPU:
0
Error Code:
0x00000000
Trap Number:
6
Binary Images:
0x1058b2000 -
0x1058c0fff com.apple.wifi.WiFiAgent (1.0 - 1) <C9972750-E326-3A70-8AB3-7CF6A9293D2B> /System/Library/CoreServices/WiFiAgent.app/Contents/MacOS/WiFiAgent
0x1058cd000 -
0x1058d3fff com.apple.WiFiCloudSyncEngine (1.0 - 27) <87D809FD-9692-3055-841E-492C6EED1035> /System/Library/PrivateFrameworks/WiFiCloudSyncEngine.framework/Versions/A/WiFi CloudSyncEngine
0x7fff69e21000 -
0x7fff69e57837 dyld (353.2.1) <4696A982-1500-34EC-9777-1EF7A03E2659> /usr/lib/dyld
0x7fff836fb000 -
0x7fff838abff7 com.apple.QuartzCore (1.10 - 361.11) <7382E4A9-10B0-3877-B9D7-FA84DC71BA55> /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
0x7fff83ba8000 -
0x7fff83bf5ff3 com.apple.print.framework.PrintCore (10.0 - 451) <3CA58254-D14F-3913-9DFB-CAC499570CC7> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/PrintCore
0x7fff83bf6000 -
0x7fff83c30ffb com.apple.DebugSymbols (115 - 115) <6F03761D-7C3A-3C80-8031-AA1C1AD7C706> /System/Library/PrivateFrameworks/DebugSymbols.framework/Versions/A/DebugSymbol s
0x7fff83c4d000 -
0x7fff83c4ffff libCVMSPluginSupport.dylib (11.0.7) <29D775BB-A11D-3140-A478-2A0DA1A87420> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libCVMSPluginS upport.dylib
0x7fff83cc3000 -
0x7fff83ddafe7 libvDSP.dylib (512) <52777555-F051-3BC2-A2D2-9645907E836D> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvDSP.dylib
0x7fff83e2e000 -
0x7fff83f70fff libsqlite3.dylib (168) <7B580EB9-9260-35FE-AE2F-276A2C242BAB> /usr/lib/libsqlite3.dylib
0x7fff83f71000 -
0x7fff83fa9ffb libsystem_network.dylib (411) <C0B2313D-47BE-38A9-BEE6-2634A4F5E14B> /usr/lib/system/libsystem_network.dylib
0x7fff840bf000 -
0x7fff842a4ff3 libicucore.A.dylib (531.30) <EF0E7544-E317-3550-A962-6AE65E78AF17> /usr/lib/libicucore.A.dylib
0x7fff8431a000 -
0x7fff8431efff libpam.2.dylib (20) <E805398D-9A92-31F8-8005-8DC188BD8B6E> /usr/lib/libpam.2.dylib
0x7fff8435e000 -
0x7fff8438effb com.apple.GSS (4.0 - 2.0) <D033E7F1-2D34-339F-A814-C67E009DE5A9> /System/Library/Frameworks/GSS.framework/Versions/A/GSS
0x7fff843af000 -
0x7fff843b1fff libsystem_configuration.dylib (699.1.5) <9FBA1CE4-97D0-347E-A443-93ED94512E92> /usr/lib/system/libsystem_configuration.dylib
0x7fff843cd000 -
0x7fff843d6ff3 com.apple.CommonAuth (4.0 - 2.0) <F4C266BE-2E0E-36B4-9DE7-C6B4BF410FD7> /System/Library/PrivateFrameworks/CommonAuth.framework/Versions/A/CommonAuth
0x7fff8458d000 -
0x7fff84598fff libGL.dylib (11.0.7) <C53344AD-8CE6-3111-AB94-BD4CA89ED84E> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib
0x7fff84e22000 -
0x7fff84e4ffff com.apple.Accounts (113 - 113) <3145FCC2-D297-3DD1-B74B-9E7DBB0EE33C> /System/Library/Frameworks/Accounts.framework/Versions/A/Accounts
0x7fff84f60000 -
0x7fff84f68ffb libcopyfile.dylib (118.1.2) <0C68D3A6-ACDD-3EF3-991A-CC82C32AB836> /usr/lib/system/libcopyfile.dylib
0x7fff84f8e000 -
0x7fff84fa0ff7 com.apple.CoreDuetDaemonProtocol (1.0 - 1) <CE9FABB4-1C5D-3F9B-9BB8-5CC50C3E5E31> /System/Library/PrivateFrameworks/CoreDuetDaemonProtocol.framework/Versions/A/C oreDuetDaemonProtocol
0x7fff85331000 -
0x7fff8534aff7 com.apple.CFOpenDirectory (10.10 - 187) <0ECA5D80-A045-3A2C-A60C-E1605F3AB6BD> /System/Library/Frameworks/OpenDirectory.framework/Versions/A/Frameworks/CFOpen Directory.framework/Versions/A/CFOpenDirectory
0x7fff855c6000 -
0x7fff855c9fff com.apple.IOSurface (97 - 97) <D4B4D2B2-7B16-3174-9EA6-55E0A10B452D> /System/Library/Frameworks/IOSurface.framework/Versions/A/IOSurface
0x7fff85643000 -
0x7fff85648ff7 libunwind.dylib (35.3) <BE7E51A0-B6EA-3A54-9CCA-9D88F683A6D6> /usr/lib/system/libunwind.dylib
0x7fff85699000 -
0x7fff8571bfff com.apple.PerformanceAnalysis (1.0 - 1) <2FC0F303-B672-3E64-A978-AB78EAD98395> /System/Library/PrivateFrameworks/PerformanceAnalysis.framework/Versions/A/Perf ormanceAnalysis
0x7fff8571c000 -
0x7fff85762ff7 libauto.dylib (186) <A260789B-D4D8-316A-9490-254767B8A5F1> /usr/lib/libauto.dylib
0x7fff85763000 -
0x7fff85822fff com.apple.backup.framework (1.6 - 1.6) <5C38C168-5E9B-335D-9570-91AF8604BB10> /System/Library/PrivateFrameworks/Backup.framework/Versions/A/Backup
0x7fff858a1000 -
0x7fff858a4ff7 libdyld.dylib (353.2.1) <19FAF435-C165-3374-9DEF-D7BBA7D61DB6> /usr/lib/system/libdyld.dylib
0x7fff858a5000 -
0x7fff85b74ff3 com.apple.CoreImage (10.0.33) <6E3DDA29-718B-3BDB-BFAF-F8C201BF93A4> /System/Library/Frameworks/QuartzCore.framework/Versions/A/Frameworks/CoreImage .framework/Versions/A/CoreImage
0x7fff85b75000 -
0x7fff85b7dffb com.apple.CoreServices.FSEvents (1210 - 1210) <782A9C69-7A45-31A7-8960-D08A36CBD0A7> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/FSEvent s.framework/Versions/A/FSEvents
0x7fff85b7e000 -
0x7fff85caefff com.apple.UIFoundation (1.0 - 1) <8E030D93-441C-3997-9CD2-55C8DFAC8B84> /System/Library/PrivateFrameworks/UIFoundation.framework/Versions/A/UIFoundatio n
0x7fff85f64000 -
0x7fff85f64fff libOpenScriptingUtil.dylib (162) <EFD79173-A9DA-3AE6-BE15-3948938204A6> /usr/lib/libOpenScriptingUtil.dylib
0x7fff85f6e000 -
0x7fff85f75ff7 libcompiler_rt.dylib (35) <BF8FC133-EE10-3DA6-9B90-92039E28678F> /usr/lib/system/libcompiler_rt.dylib
0x7fff85f76000 -
0x7fff85f7afff libCoreVMClient.dylib (79) <FC4E08E3-749E-32FF-B5E9-211F29864831> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libCoreVMClien t.dylib
0x7fff85f7b000 -
0x7fff85fa6fff libc++abi.dylib (125) <88A22A0F-87C6-3002-BFBA-AC0F2808B8B9> /usr/lib/libc++abi.dylib
0x7fff85fa7000 -
0x7fff86006ff3 com.apple.AE (681 - 681) <7F544183-A515-31A8-B45F-89A167F56216> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/AE.fram ework/Versions/A/AE
0x7fff86007000 -
0x7fff8600bff7 com.apple.TCC (1.0 - 1) <AFC32F8F-BCD5-313C-B66E-5AB8591EC066> /System/Library/PrivateFrameworks/TCC.framework/Versions/A/TCC
0x7fff8600c000 -
0x7fff8619afff libBLAS.dylib (1128) <497912C1-A98E-3281-BED7-E9C751552F61> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libBLAS.dylib
0x7fff8619b000 -
0x7fff861afff7 com.apple.MultitouchSupport.framework (260.30 - 260.30) <28728A7D-E048-3B14-9932-839A87D381FE> /System/Library/PrivateFrameworks/MultitouchSupport.framework/Versions/A/Multit ouchSupport
0x7fff861b0000 -
0x7fff863b3ff3 com.apple.CFNetwork (720.0.9 - 720.0.9) <78EE1B88-394F-3BB8-93A6-E068990559EC> /System/Library/Frameworks/CFNetwork.framework/Versions/A/CFNetwork
0x7fff863df000 -
0x7fff864d2ff7 libJP2.dylib (1231) <58849E48-9CD2-38A1-9D48-FCE630F473EB> /System/Library/Frameworks/ImageIO.framework/Versions/A/Resources/libJP2.dylib
0x7fff864d3000 -
0x7fff864e0ff7 libxar.1.dylib (254) <CE10EFED-3066-3749-838A-6A15AC0DBCB6> /usr/lib/libxar.1.dylib
0x7fff864e9000 -
0x7fff86511fff libxpc.dylib (559.1.22) <9437C02E-A07B-38C8-91CB-299FAA63083D> /usr/lib/system/libxpc.dylib
0x7fff8652f000 -
0x7fff86831fff com.apple.HIToolbox (2.1.1 - 756) <9DD121B5-B7EB-3C43-8155-61A4417F8E9A> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
0x7fff86856000 -
0x7fff8696effb com.apple.CoreText (352.0 - 454.1) <AB07DF12-BB1F-3275-A8A3-45F14BF872BF> /System/Library/Frameworks/CoreText.framework/Versions/A/CoreText
0x7fff8696f000 -
0x7fff86971fff com.apple.CoreDuetDebugLogging (1.0 - 1) <9A6E5710-EA99-366E-BF40-9A65EC1B46A1> /System/Library/PrivateFrameworks/CoreDuetDebugLogging.framework/Versions/A/Cor eDuetDebugLogging
0x7fff86975000 -
0x7fff86990ff7 com.apple.aps.framework (4.0 - 4.0) <9955CAFD-D56B-36E9-BB41-6F7F73317EB5> /System/Library/PrivateFrameworks/ApplePushService.framework/Versions/A/ApplePu shService
0x7fff86991000 -
0x7fff86bf9ffb com.apple.security (7.0 - 57031.1.35) <96141D1F-614E-32C4-8AC2-F47481F23F43> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x7fff86bfa000 -
0x7fff86bfdfff com.apple.xpc.ServiceManagement (1.0 - 1) <7E9E6BB7-AEE7-3F59-BAC0-59EAF105D0C8> /System/Library/Frameworks/ServiceManagement.framework/Versions/A/ServiceManage ment
0x7fff86c14000 -
0x7fff86c15ffb libremovefile.dylib (35) <3485B5F4-6CE8-3C62-8DFD-8736ED6E8531> /usr/lib/system/libremovefile.dylib
0x7fff86c16000 -
0x7fff86c30ff3 com.apple.Ubiquity (1.3 - 313) <DF56A657-CC6E-3BE2-86A0-71F07127724C> /System/Library/PrivateFrameworks/Ubiquity.framework/Versions/A/Ubiquity
0x7fff86d72000 -
0x7fff86d79fff libCGCMS.A.dylib (772) <E64DC779-A6CF-3B1F-8E57-C09C0B10670F> /System/Library/Frameworks/CoreGraphics.framework/Versions/A/Resources/libCGCMS .A.dylib
0x7fff86d7a000 -
0x7fff86d7aff7 libunc.dylib (29) <5676F7EA-C1DF-329F-B006-D2C3022B7D70> /usr/lib/system/libunc.dylib
0x7fff870e7000 -
0x7fff87128fff libGLU.dylib (11.0.7) <8037342E-1ECD-385F-B4C3-545CE97B76AE> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLU.dylib
0x7fff87129000 -
0x7fff87156fff com.apple.CoreVideo (1.8 - 145.1) <18DB07E0-B927-3260-A234-636F298D1917> /System/Library/Frameworks/CoreVideo.framework/Versions/A/CoreVideo
0x7fff8715e000 -
0x7fff871f3ff7 com.apple.ColorSync (4.9.0 - 4.9.0) <F06733BD-A10C-3DB3-B050-825351130392> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/ColorSync
0x7fff871f4000 -
0x7fff871f9ff7 libmacho.dylib (862) <126CA2ED-DE91-308F-8881-B9DAEC3C63B6> /usr/lib/system/libmacho.dylib
0x7fff87233000 -
0x7fff872a2fff com.apple.SearchKit (1.4.0 - 1.4.0) <BFD6D876-36BA-3A3B-9F15-3E2F7DE6E89D> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
0x7fff872a3000 -
0x7fff872d0ffb com.apple.SystemConfiguration.EAP8021X (14.0.0 - 14.0) <3646ECEF-1875-31CD-B614-FBE29A7500EF> /System/Library/PrivateFrameworks/EAP8021X.framework/Versions/A/EAP8021X
0x7fff872e6000 -
0x7fff87335ff7 com.apple.opencl (2.4.2 - 2.4.2) <6AE26E08-6EFC-3E1B-B202-EFA9C3E5B9D4> /System/Library/Frameworks/OpenCL.framework/Versions/A/OpenCL
0x7fff8734e000 -
0x7fff87352fff libcache.dylib (69) <45E9A2E7-99C4-36B2-BEE3-0C4E11614AD1> /usr/lib/system/libcache.dylib
0x7fff8736b000 -
0x7fff873d9ffb com.apple.Heimdal (4.0 - 2.0) <B852ACA1-4C64-3E2A-A9D3-6D4C80AD9429> /System/Library/PrivateFrameworks/Heimdal.framework/Versions/A/Heimdal
0x7fff873da000 -
0x7fff87517fff com.apple.ImageIO.framework (3.3.0 - 1038) <611BDFBA-4BAA-36A8-B7E0-3830F3375E53> /System/Library/Frameworks/ImageIO.framework/Versions/A/ImageIO
0x7fff8754b000 -
0x7fff87553fff libsystem_platform.dylib (63) <64E34079-D712-3D66-9CE2-418624A5C040> /usr/lib/system/libsystem_platform.dylib
0x7fff87561000 -
0x7fff87991fff com.apple.vision.FaceCore (3.1.6 - 3.1.6) <C3B823AA-C261-37D3-B4AC-C59CE91C8241> /System/Library/PrivateFrameworks/FaceCore.framework/Versions/A/FaceCore
0x7fff87992000 -
0x7fff879defff com.apple.corelocation (1486.17 - 1615.21) <DB68CEB9-0D51-3CB9-86A4-B0400CE6C515> /System/Library/Frameworks/CoreLocation.framework/Versions/A/CoreLocation
0x7fff879df000 -
0x7fff87a39ff7 com.apple.LanguageModeling (1.0 - 1) <ACA93FE0-A0E3-333E-AE3C-8EB7DE5F362F> /System/Library/PrivateFrameworks/LanguageModeling.framework/Versions/A/Languag eModeling
0x7fff87b51000 -
0x7fff87b91ff7 libGLImage.dylib (11.0.7) <7CBCEB4B-D22F-3116-8B28-D1C22D28C69D> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLImage.dyl ib
0x7fff87b93000 -
0x7fff87c32df7 com.apple.AppleJPEG (1.0 - 1) <9BB3D7DF-630A-3E1C-A124-12D6C4D0DE70> /System/Library/PrivateFrameworks/AppleJPEG.framework/Versions/A/AppleJPEG
0x7fff87c95000 -
0x7fff87d87ff7 libiconv.2.dylib (42) <2A06D02F-8B76-3864-8D96-64EF5B40BC6C> /usr/lib/libiconv.2.dylib
0x7fff87d88000 -
0x7fff87eaffff com.apple.coreui (2.1 - 305) <BB430677-D1F7-38DD-8F05-70E54352B8B5> /System/Library/PrivateFrameworks/CoreUI.framework/Versions/A/CoreUI
0x7fff87eb0000 -
0x7fff87edffff com.apple.securityinterface (10.0 - 55058) <21F38170-2D3D-3FA2-B0EC-379482AFA5E4> /System/Library/Frameworks/SecurityInterface.framework/Versions/A/SecurityInter face
0x7fff87ef5000 -
0x7fff87f69ff3 com.apple.securityfoundation (6.0 - 55126) <E7FB7A4E-CB0B-37BA-ADD5-373B2A20A783> /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/SecurityFoun dation
0x7fff88483000 -
0x7fff884a2fff com.apple.CoreDuet (1.0 - 1) <36AA9FD5-2685-314D-B364-3FA4688D86BD> /System/Library/PrivateFrameworks/CoreDuet.framework/Versions/A/CoreDuet
0x7fff884b2000 -
0x7fff884b4fff libRadiance.dylib (1231) <746E9989-E89C-3027-A418-5F99CE131C93> /System/Library/Frameworks/ImageIO.framework/Versions/A/Resources/libRadiance.d ylib
0x7fff894e6000 -
0x7fff89500ff7 liblzma.5.dylib (7) <1D03E875-A7C0-3028-814C-3C27F7B7C079> /usr/lib/liblzma.5.dylib
0x7fff89514000 -
0x7fff89518ff7 libGIF.dylib (1231) <A349BA73-301E-3EDE-8A31-8ACE827C289E> /System/Library/Frameworks/ImageIO.framework/Versions/A/Resources/libGIF.dylib
0x7fff89519000 -
0x7fff89522fff libGFXShared.dylib (11.0.7) <EC449E3A-D9D2-3494-8B6C-DEB7B11EEDAB> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGFXShared.d ylib
0x7fff89523000 -
0x7fff89524fff libsystem_secinit.dylib (18) <581DAD0F-6B63-3A48-B63B-917AF799ABAA> /usr/lib/system/libsystem_secinit.dylib
0x7fff89593000 -
0x7fff895beff3 libarchive.2.dylib (30) <8CBB4416-EBE9-3574-8ADC-44655D245F39> /usr/lib/libarchive.2.dylib
0x7fff895cc000 -
0x7fff895d9fff com.apple.SpeechRecognitionCore (2.0.32 - 2.0.32) <87F0C88D-502D-3217-8B4A-8388288568BA> /System/Library/PrivateFrameworks/SpeechRecognitionCore.framework/Versions/A/Sp eechRecognitionCore
0x7fff895da000 -
0x7fff89652ff7 com.apple.SystemConfiguration (1.14 - 1.14) <C269BCFD-ACAB-3331-BC7C-0430F0E84817> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x7fff8969b000 -
0x7fff896a3fff libsystem_dnssd.dylib (561.1.1) <62B70ECA-E40D-3C63-896E-7F00EC386DDB> /usr/lib/system/libsystem_dnssd.dylib
0x7fff896a7000 -
0x7fff896a7fff com.apple.Accelerate (1.10 - Accelerate 1.10) <227E2491-1DDB-336F-BF83-773CECEC66F1> /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
0x7fff89a1e000 -
0x7fff89a1ffff com.apple.TrustEvaluationAgent (2.0 - 25) <2D61A2C3-C83E-3A3F-8EC1-736DBEC250AB> /System/Library/PrivateFrameworks/TrustEvaluationAgent.framework/Versions/A/Tru stEvaluationAgent
0x7fff89bfa000 -
0x7fff89c23ffb libxslt.1.dylib (13) <AED1143F-B848-3E73-81ED-71356F25F084> /usr/lib/libxslt.1.dylib
0x7fff89c24000 -
0x7fff89c2aff7 libsystem_networkextension.dylib (167.1.10) <29AB225B-D7FB-30ED-9600-65D44B9A9442> /usr/lib/system/libsystem_networkextension.dylib
0x7fff89c2b000 -
0x7fff89c2dff7 libquarantine.dylib (76) <DC041627-2D92-361C-BABF-A869A5C72293> /usr/lib/system/libquarantine.dylib
0x7fff89c2e000 -
0x7fff89c2ffff libDiagnosticMessagesClient.dylib (100) <2EE8E436-5CDC-34C5-9959-5BA218D507FB> /usr/lib/libDiagnosticMessagesClient.dylib
0x7fff89c30000 -
0x7fff89c71fff com.apple.framework.corewlankit (4.0 - 400.35) <C5408B27-623E-3B20-A6B1-747937AB8F26> /System/Library/PrivateFrameworks/CoreWLANKit.framework/Versions/A/CoreWLANKit
0x7fff89c72000 -
0x7fff89ca0fff com.apple.CoreServicesInternal (221.1 - 221.1) <51BAE6D2-84F3-392A-BFEC-A3B47B80A3D2> /System/Library/PrivateFrameworks/CoreServicesInternal.framework/Versions/A/Cor eServicesInternal
0x7fff89ca1000 -
0x7fff89d0dfff com.apple.framework.CoreWLAN (5.0 - 500.35.2) <ACBAAB0A-BCC7-37CF-AAFB-2DA1733F2682> /System/Library/Frameworks/CoreWLAN.framework/Versions/A/CoreWLAN
0x7fff89d15000 -
0x7fff89d92fff com.apple.CoreServices.OSServices (640.3 - 640.3) <28445162-08E9-3E24-84E4-617CE5FE1367> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
0x7fff89d93000 -
0x7fff89d9dff7 com.apple.NetAuth (5.0 - 5.0) <B9EC5425-D38D-308C-865F-207E0A98BAC7> /System/Library/PrivateFrameworks/NetAuth.framework/Versions/A/NetAuth
0x7fff89d9e000 -
0x7fff89dc9fff com.apple.DictionaryServices (1.2 - 229) <6789EC43-CADA-394D-8FE8-FC3A2DD136B9> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Diction aryServices.framework/Versions/A/DictionaryServices
0x7fff89e25000 -
0x7fff89e3fff7 com.apple.AppleVPAFramework (1.0.30 - 1.0.30) <D47A2125-C72D-3298-B27D-D89EA0D55584> /System/Library/PrivateFrameworks/AppleVPA.framework/Versions/A/AppleVPA
0x7fff89e40000 -
0x7fff89ea7ff7 com.apple.framework.CoreWiFi (3.0 - 300.4) <19269C1D-EB29-384A-83F3-7DDDEB7D9DAD> /System/Library/PrivateFrameworks/CoreWiFi.framework/Versions/A/CoreWiFi
0x7fff89ea8000 -
0x7fff89eb1ff7 libsystem_notify.dylib (133.1.1) <61147800-F320-3DAA-850C-BADF33855F29> /usr/lib/system/libsystem_notify.dylib
0x7fff89eb2000 -
0x7fff89eb3fff libSystem.B.dylib (1213) <DA954461-EC6A-3DF0-8551-6FC810627627> /usr/lib/libSystem.B.dylib
0x7fff89fe3000 -
0x7fff8a059fe7 libcorecrypto.dylib (233.1.2) <E1789801-3985-3949-B736-6B3378873301> /usr/lib/system/libcorecrypto.dylib
0x7fff8a05a000 -
0x7fff8a05afff com.apple.Cocoa (6.8 - 21) <EAC0EA1E-3C62-3B28-A941-5D8B1E085FF8> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
0x7fff8a877000 -
0x7fff8a898fff com.apple.framework.Apple80211 (10.0 - 1000.57.3) <F64EB1A1-57F3-3ABA-97D0-DB7C926FD07F> /System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Apple80211
0x7fff8a8ae000 -
0x7fff8a8aefff com.apple.audio.units.AudioUnit (1.12 - 1.12) <76EF1C9D-DEA4-3E55-A134-4099B2FD2CF2> /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x7fff8a8af000 -
0x7fff8a8c0ff7 libsystem_coretls.dylib (35.1.2) <EBBF7EF6-80D8-3F8F-825C-B412BD6D22C0> /usr/lib/system/libsystem_coretls.dylib
0x7fff8affb000 -
0x7fff8b04cff7 com.apple.audio.CoreAudio (4.3.0 - 4.3.0) <AF72B06E-C6C1-3FAE-8B47-AF461CAE0E22> /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
0x7fff8b04d000 -
0x7fff8b45aff7 libLAPACK.dylib (1128) <F9201AE7-B031-36DB-BCF8-971E994EF7C1> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
0x7fff8bdc0000 -
0x7fff8bdcdff7 libbz2.1.0.dylib (36) <2DF83FBC-5C08-39E1-94F5-C28653791B5F> /usr/lib/libbz2.1.0.dylib
0x7fff8bf5e000 -
0x7fff8bf7afff com.apple.GenerationalStorage (2.0 - 209.11) <9FF8DD11-25FB-3047-A5BF-9415339B3EEC> /System/Library/PrivateFrameworks/GenerationalStorage.framework/Versions/A/Gene rationalStorage
0x7fff8bf7b000 -
0x7fff8c01dfff com.apple.Bluetooth (4.3.0 - 4.3.0f10) <70922125-2A01-37AE-9CB8-D8A9578092E4> /System/Library/Frameworks/IOBluetooth.framework/Versions/A/IOBluetooth
0x7fff8c122000 -
0x7fff8cc63fff com.apple.AppKit (6.9 - 1343.14) <1732C412-257B-340E-8863-B8162D4EB2E2> /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
0x7fff8cc64000 -
0x7fff8cc80ff7 libsystem_malloc.dylib (53.1.1) <19BCC257-5717-3502-A71F-95D65AFA861B> /usr/lib/system/libsystem_malloc.dylib
0x7fff8cc81000 -
0x7fff8cc81ff7 liblaunch.dylib (559.1.22) <8A988924-8BE7-35FE-BF7D-322E90EFE49E> /usr/lib/system/liblaunch.dylib
0x7fff8cc84000 -
0x7fff8ccf8fff com.apple.ApplicationServices.ATS (360 - 375) <62828B40-231D-3F81-8067-1903143DCB6B> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
0x7fff8ccf9000 -
0x7fff8ccf9fff com.apple.Accelerate.vecLib (3.10 - vecLib 3.10) <A48738CA-5B6F-3D14-97E9-2BFDFC3DCC06> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/vecLib
0x7fff8ccfa000 -
0x7fff8cd1fff7 libJPEG.dylib (1231) <35F13BD9-AA92-3510-B5BB-420DA15AE7F2> /System/Library/Frameworks/ImageIO.framework/Versions/A/Resources/libJPEG.dylib
0x7fff8cd20000 -
0x7fff8cd3aff7 com.apple.Kerberos (3.0 - 1) <7760E0C2-A222-3709-B2A6-B692D900CEB1> /System/Library/Frameworks/Kerberos.framework/Versions/A/Kerberos
0x7fff8d228000 -
0x7fff8d4d4fff com.apple.GeoServices (1.0 - 982.4.10) <8A7FE04A-2785-30E7-A6E2-DC15D170DAF5> /System/Library/PrivateFrameworks/GeoServices.framework/Versions/A/GeoServices
0x7fff8d4d5000 -
0x7fff8d86bfff com.apple.CoreFoundation (6.9 - 1151.16) <F2B088AF-A5C6-3FAE-9EB4-7931AF6359E4> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x7fff8d870000 -
0x7fff8d875fff com.apple.DiskArbitration (2.6 - 2.6) <0DFF4D9B-2AC3-3B82-B5C5-30F4EFBD2DB9> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x7fff8d8b7000 -
0x7fff8d8c5ff7 com.apple.opengl (11.0.7 - 11.0.7) <B5C4DF85-37BD-3984-98D1-90A5043DA984> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
0x7fff8d913000 -
0x7fff8d917fff libsystem_stats.dylib (163.1.4) <1DB04436-5974-3F16-86CC-5FF5F390339C> /usr/lib/system/libsystem_stats.dylib
0x7fff8d91b000 -
0x7fff8d91bfff com.apple.CoreServices (62 - 62) <9E4577CA-3FC3-300D-AB00-87ADBDDA2E37> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x7fff8da19000 -
0x7fff8daa5fff libsystem_c.dylib (1044.1.2) <C185E862-7424-3210-B528-6B822577A4B8> /usr/lib/system/libsystem_c.dylib
0x7fff8dbdb000 -
0x7fff8dc16fff com.apple.QD (301 - 301) <C4D2AD03-B839-350A-AAF0-B4A08F8BED77> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD
0x7fff8dc17000 -
0x7fff8dc1cffb libheimdal-asn1.dylib (398.1.2) <F9463B34-AAF5-3488-AD0C-85937C81FC5E> /usr/lib/libheimdal-asn1.dylib
0x7fff8dc1d000 -
0x7fff8dc28ff7 libkxld.dylib (2782.1.97) <CB1A1B57-54BE-3573-AE0C-B90ED6BAEEE2> /usr/lib/system/libkxld.dylib
0x7fff8dc29000 -
0x7fff8df5cfff libmecabra.dylib (666) <2CE5540A-D412-3D53-9E11-86C24D61713B> /usr/lib/libmecabra.dylib
0x7fff8df77000 -
0x7fff8e15c267 libobjc.A.dylib (646) <3B60CD90-74A2-3A5D-9686-B0772159792A> /usr/lib/libobjc.A.dylib
0x7fff8e3c8000 -
0x7fff8e3d0ff7 com.apple.AppleSRP (5.0 - 1) <01EC5144-D09A-3D6A-AE35-F6D48585F154> /System/Library/PrivateFrameworks/AppleSRP.framework/Versions/A/AppleSRP
0x7fff8e438000 -
0x7fff8e445fff com.apple.ProtocolBuffer (1 - 225.1) <2D502FBB-D2A0-3937-A5C5-385FA65B3874> /System/Library/PrivateFrameworks/ProtocolBuffer.framework/Versions/A/ProtocolB uffer
0x7fff8e44b000 -
0x7fff8e456ff7 com.apple.speech.synthesis.framework (5.2.6 - 5.2.6) <9434AA45-B6BD-37F7-A866-172196A7F91B> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ SpeechSynthesis.framework/Versions/A/SpeechSynthesis
0x7fff8e77e000 -
0x7fff8efd5ff3 com.apple.CoreGraphics (1.600.0 - 772) <6364CBE3-3635-3A53-B448-9D19EF9FEA96> /System/Library/Frameworks/CoreGraphics.framework/Versions/A/CoreGraphics
0x7fff8efd6000 -
0x7fff8eff1ff7 libCRFSuite.dylib (34) <D64842BE-7BD4-3D0C-9842-1D202F7C2A51> /usr/lib/libCRFSuite.dylib
0x7fff8f195000 -
0x7fff8f1e1ff7 libcups.2.dylib (408) <9CECCDE3-51D7-3028-830C-F58BD36E3317> /usr/lib/libcups.2.dylib
0x7fff8f1e2000 -
0x7fff8f303fff com.apple.LaunchServices (644.10 - 644.10) <0B1C68BC-0AEB-38E2-ABC8-E92728FEC475> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/LaunchServices
0x7fff8f358000 -
0x7fff8f37dff7 libPng.dylib (1231) <2D5AC0EE-4056-3F76-97E7-BBD415F072B5> /System/Library/Frameworks/ImageIO.framework/Versions/A/Resources/libPng.dylib
0x7fff8f37e000 -
0x7fff8f48dffb com.apple.desktopservices (1.9 - 1.9) <6EDAC73F-C42C-3FF7-B67D-FCCA1CFC5405> /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv
0x7fff8f48e000 -
0x7fff8f48efff com.apple.ApplicationServices (48 - 48) <5BF7910B-C328-3BF8-BA4F-CE52B574CE01> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
0x7fff8f48f000 -
0x7fff8f523fff com.apple.ink.framework (10.9 - 213) <8E029630-1530-3734-A446-13353F0E7AC5> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework /Versions/A/Ink
0x7fff8f549000 -
0x7fff8f579fff libsystem_m.dylib (3086.1) <1E12AB45-6D96-36D0-A226-F24D9FB0D9D6> /usr/lib/system/libsystem_m.dylib
0x7fff8f5a3000 -
0x7fff8f5e3ff7 com.apple.CloudDocs (1.0 - 280.1) <21D7E10A-99EF-34BE-82D7-29A6F1761DE5> /System/Library/PrivateFrameworks/CloudDocs.framework/Versions/A/CloudDocs
0x7fff8f64a000 -
0x7fff8f667ffb libresolv.9.dylib (57) <26B38E61-298A-3C3A-82C1-3B5E98AD5E29> /usr/lib/libresolv.9.dylib
0x7fff8ffe2000 -
0x7fff8ffecff7 com.apple.CrashReporterSupport (10.10 - 629) <EC97EA5E-3190-3717-A4A9-2F35A447E7A6> /System/Library/PrivateFrameworks/CrashReporterSupport.framework/Versions/A/Cra shReporterSupport
0x7fff8ffed000 -
0x7fff8ffefff7 libsystem_coreservices.dylib (9) <41B7C578-5A53-31C8-A96F-C73E030B0938> /usr/lib/system/libsystem_coreservices.dylib
0x7fff903c8000 -
0x7fff903dfff7 libLinearAlgebra.dylib (1128) <E78CCBAA-A999-3B65-8EC9-06DB15E67C37> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLinearAlgebra.dylib
0x7fff9067e000 -
0x7fff90689fff libcommonCrypto.dylib (60061) <D381EBC6-69D8-31D3-8084-5A80A32CB748> /usr/lib/system/libcommonCrypto.dylib
0x7fff90693000 -
0x7fff906a4fff libcmph.dylib (1) <46EC3997-DB5E-38AE-BBBB-A035A54AD3C0> /usr/lib/libcmph.dylib
0x7fff9070c000 -
0x7fff9070dfff liblangid.dylib (117) <B54A4AA0-2E53-3671-90F5-AFF711C0EB9E> /usr/lib/liblangid.dylib
0x7fff907e3000 -
0x7fff90854ff7 com.apple.framework.IOKit (2.0.2 - 1050.1.21) <ED3B0B22-AACC-303B-BFC8-20ECD1AF6BA2> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x7fff90855000 -
0x7fff908a9fff libc++.1.dylib (120) <1B9530FD-989B-3174-BB1C-BDC159501710> /usr/lib/libc++.1.dylib
0x7fff90919000 -
0x7fff90923fff com.apple.CaptiveNetworkSupport (13.0 - 1) <D44A799E-C106-3600-BD95-22B05ECCBA02> /System/Library/PrivateFrameworks/CaptiveNetwork.framework/Versions/A/CaptiveNe twork
0x7fff90942000 -
0x7fff90944fff com.apple.OAuth (25 - 25) <EE765AF0-2BB6-3689-9EAA-689BF1F02A0D> /System/Library/PrivateFrameworks/OAuth.framework/Versions/A/OAuth
0x7fff90c5d000 -
0x7fff90ceefff com.apple.cloudkit.CloudKit (259.2.3 - 259.2.3) <6F955140-D522-32B3-B34B-BD94C5D94E7A> /System/Library/Frameworks/CloudKit.framework/Versions/A/CloudKit
0x7fff90d13000 -
0x7fff90d26ff7 com.apple.CoreBluetooth (1.0 - 1) <FA9B43B3-E183-3040-AE25-66EF9870CF35> /System/Library/Frameworks/CoreBluetooth.framework/Versions/A/CoreBluetooth
0x7fff90d5a000 -
0x7fff90d77fff libsystem_kernel.dylib (2782.1.97) <93E0E0A9-75B6-3904-BB4E-4BC7C05F4B6B> /usr/lib/system/libsystem_kernel.dylib
0x7fff90edf000 -
0x7fff90f07fff libsystem_info.dylib (459) <B85A85D5-8530-3A93-B0C3-4DEC41F79478> /usr/lib/system/libsystem_info.dylib
0x7fff90f08000 -
0x7fff90f18ff7 libbsm.0.dylib (34) <A3A2E56C-2B65-37C7-B43A-A1F926E1A0BB> /usr/lib/libbsm.0.dylib
0x7fff90fb0000 -
0x7fff90fd3fff com.apple.Sharing (328.3 - 328.3) <FDEE49AD-8804-3760-9C14-8D1D10BBEA37> /System/Library/PrivateFrameworks/Sharing.framework/Versions/A/Sharing
0x7fff90ff9000 -
0x7fff910dcfff libcrypto.0.9.8.dylib (52) <7208EEE2-C090-383E-AADD-7E1BD1321BEC> /usr/lib/libcrypto.0.9.8.dylib
0x7fff91102000 -
0x7fff91104fff com.apple.loginsupport (1.0 - 1) <35A2A071-606C-39A5-8C11-E4CAF98D934C> /System/Library/PrivateFrameworks/login.framework/Versions/A/Frameworks/loginsu pport.framework/Versions/A/loginsupport
0x7fff91105000 -
0x7fff913ecffb com.apple.CoreServices.CarbonCore (1108.1 - 1108.1) <55A16172-ACC0-38B7-8409-3CB92AF33973> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
0x7fff913fc000 -
0x7fff91485fff com.apple.CoreSymbolication (3.1 - 56072) <8CE81C95-49E8-389F-B989-67CC452C08D0> /System/Library/PrivateFrameworks/CoreSymbolication.framework/Versions/A/CoreSy mbolication
0x7fff91513000 -
0x7fff9152dff7 libextension.dylib (55) <17514AB2-C503-3D49-A725-EBC1140567A6> /usr/lib/libextension.dylib
0x7fff9152e000 -
0x7fff9154efff com.apple.IconServices (47.1 - 47.1) <E83DFE3B-6541-3736-96BB-26DC5D0100F1> /System/Library/PrivateFrameworks/IconServices.framework/Versions/A/IconService s
0x7fff9154f000 -
0x7fff91565ff7 libsystem_asl.dylib (267) <F153AC5B-0542-356E-88C8-20A62CA704E2> /usr/lib/system/libsystem_asl.dylib
0x7fff91566000 -
0x7fff916d1ff7 com.apple.audio.toolbox.AudioToolbox (1.12 - 1.12) <5C6DBEB4-F2EA-3262-B9FC-AFB89404C1DA> /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
0x7fff9172a000 -
0x7fff91773ff3 com.apple.HIServices (1.22 - 519) <59D78E07-C3F1-3272-88F1-876B836D5517> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ HIServices.framework/Versions/A/HIServices
0x7fff917f5000 -
0x7fff9181bff7 com.apple.ChunkingLibrary (2.1 - 163.1) <3514F2A4-38BD-3849-9286-B3B991057742> /System/Library/PrivateFrameworks/ChunkingLibrary.framework/Versions/A/Chunking Library
0x7fff91958000 -
0x7fff91958ff7 libkeymgr.dylib (28) <77845842-DE70-3CC5-BD01-C3D14227CED5> /usr/lib/system/libkeymgr.dylib
0x7fff91959000 -
0x7fff919c0ff7 com.apple.datadetectorscore (6.0 - 396.1) <5D348063-1528-3E2F-B587-9E82970506F9> /System/Library/PrivateFrameworks/DataDetectorsCore.framework/Versions/A/DataDe tectorsCore
0x7fff919c1000 -
0x7fff91a84ff7 libvMisc.dylib (512) <A4E39464-52EA-34CB-9FFE-53E79B3C65F5> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
0x7fff91a87000 -
0x7fff91ab9ff3 com.apple.frameworks.CoreDaemon (1.3 - 1.3) <C6DB0A07-F8E4-3837-BCA9-225F460EDA81> /System/Library/PrivateFrameworks/CoreDaemon.framework/Versions/B/CoreDaemon
0x7fff91c19000 -
0x7fff91c1aff7 libsystem_blocks.dylib (65) <9615D10A-FCA7-3BE4-AA1A-1B195DACE1A1> /usr/lib/system/libsystem_blocks.dylib
0x7fff91c55000 -
0x7fff91cf3fff com.apple.Metadata (10.7.0 - 916) <DA8A1D18-19FE-37B3-BE12-85C5B0A00736> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
0x7fff91cf4000 -
0x7fff91cfafff com.apple.speech.recognition.framework (5.0.9 - 5.0.9) <BB2D573F-0A01-379F-A2BA-3C454EDCB111> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogni tion.framework/Versions/A/SpeechRecognition
0x7fff91cfb000 -
0x7fff91d41ffb libFontRegistry.dylib (134) <01B8034A-45FD-3360-A347-A1896F591363> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Resources/libFontRegistry.dylib
0x7fff91d42000 -
0x7fff91d9dfff libTIFF.dylib (1231) <ACC9ED11-EED8-3A23-B452-3F40FF7EF435> /System/Library/Frameworks/ImageIO.framework/Versions/A/Resources/libTIFF.dylib
0x7fff91e45000 -
0x7fff91e4efff libsystem_pthread.dylib (105.1.4) <26B1897F-0CD3-30F3-B55A-37CB45062D73> /usr/lib/system/libsystem_pthread.dylib
0x7fff91e80000 -
0x7fff91eaaff7 libdispatch.dylib (442.1.4) <502CF32B-669B-3709-8862-08188225E4F0> /usr/lib/system/libdispatch.dylib
0x7fff91ff0000 -
0x7fff91ffcff7 com.apple.OpenDirectory (10.10 - 187) <1D0066FC-1DEB-381B-B15C-4C009E0DF850> /System/Library/Frameworks/OpenDirectory.framework/Versions/A/OpenDirectory
0x7fff91ffd000 -
0x7fff92035fff com.apple.RemoteViewServices (2.0 - 99) <C9A62691-B0D9-34B7-B71C-A48B5F4DC553> /System/Library/PrivateFrameworks/RemoteViewServices.framework/Versions/A/Remot eViewServices
0x7fff92036000 -
0x7fff92489fc7 com.apple.vImage (8.0 - 8.0) <33BE7B31-72DB-3364-B37E-C322A32748C5> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.fr amework/Versions/A/vImage
0x7fff92499000 -
0x7fff9258dff7 libFontParser.dylib (134) <506126F8-FDCE-3DE1-9DCA-E07FE658B597> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Resources/libFontParser.dylib
0x7fff9258e000 -
0x7fff925c9fff com.apple.Symbolication (1.4 - 56045) <D64571B1-4483-3FE2-BD67-A91360F79727> /System/Library/PrivateFrameworks/Symbolication.framework/Versions/A/Symbolicat ion
0x7fff92665000 -
0x7fff92674fff com.apple.LangAnalysis (1.7.0 - 1.7.0) <D1E527E4-C561-352F-9457-E8C50232793C> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
0x7fff92752000 -
0x7fff92759fff com.apple.NetFS (6.0 - 4.0) <1581D25F-CC07-39B0-90E8-5D4F3CF84EBA> /System/Library/Frameworks/NetFS.framework/Versions/A/NetFS
0x7fff927b0000 -
0x7fff92a2afff com.apple.CoreData (110 - 526) <AEEDAF00-D38F-3A15-B3C9-73732940CC55> /System/Library/Frameworks/CoreData.framework/Versions/A/CoreData
0x7fff92b09000 -
0x7fff92e37ff7 com.apple.Foundation (6.9 - 1151.16) <18EDD673-A010-3E99-956E-DA594CE1FA80> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x7fff92e38000 -
0x7fff92f2afff libxml2.2.dylib (26) <B834E7C8-EC3E-3382-BC5A-DA38DC4D720C> /usr/lib/libxml2.2.dylib
0x7fff92ff1000 -
0x7fff93002ff7 libz.1.dylib (55) <88C7C7DE-04B8-316F-8B74-ACD9F3DE1AA1> /usr/lib/libz.1.dylib
0x7fff930bf000 -
0x7fff930c5fff libsystem_trace.dylib (72.1.3) <A9E6B7D8-C327-3742-AC54-86C94218B1DF> /usr/lib/system/libsystem_trace.dylib
0x7fff930f4000 -
0x7fff930f6ff7 libsystem_sandbox.dylib (358.1.1) <DB9962EF-8898-31CC-9B87-E01F8CE74C9D> /usr/lib/system/libsystem_sandbox.dylib
External Modification Summary:
Calls made by other processes targeting this process:
task_for_pid: 1
thread_create: 0
thread_set_state: 0
Calls made by this process:
task_for_pid: 0
thread_create: 0
thread_set_state: 0
Calls made by all processes on this machine:
task_for_pid: 239
thread_create: 0
thread_set_state: 0
VM Region Summary:
ReadOnly portion of Libraries: Total=178.2M resident=88.7M(50%) swapped_out_or_unallocated=89.5M(50%)
Writable regions: Total=33.1M written=2204K(7%) resident=3472K(10%) swapped_out=0K(0%) unallocated=29.7M(90%)
REGION TYPE
VIRTUAL
===========
=======
CG shared images
144K
Dispatch continuations
4096K
Kernel Alloc Once
8K
MALLOC
18.3M
MALLOC (admin)
32K
STACK GUARD
56.0M
Stack
9824K
VM_ALLOCATE
1120K
__DATA
15.1M
__IMAGE
528K
__LINKEDIT
70.1M
__TEXT
108.1M
__UNICODE
544K
mapped file
39.7M
shared memory
4K
===========
=======
TOTAL
323.3M
Any help will be greatly appreciated!
Elias1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.FolderActions.folders com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper ' ' 879294308 461455494 3627668074 1083382502 1274181950 1855907737 1848501757 464843899 3694147963 1417519526 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 3301885676 891055588 998894468 695903914 4136085286 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' 's/^.+: //p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e sysctl\ -n pluginkit sudo\ smcDiagnose );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|Roame|SMC:|suhel| VALI|ver-r|xpma' -o -o -k Sender fseventsd -k Message Req SL -o -k Sender Req launchd -k Message Req de: " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D13 40 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 38 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 39 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.
Maybe you are looking for
-
Help! I am having problems printing to HP LaserJet P1006? How can I get it to work?
Hey All! I have an old iMac that I am having a few issues with getting it to print with my HP LaserJet P1006. It will print from MS Word, but not any other program. Whenever I try to print from any other program (Excel, Preview, Firefox browser) it s
-
Can't get navigatetourl to work
i've created a flash animation with as3. at the end of the timeline i've got a stop(); action on the last frame which is working just fine. on the following frame i have the navigatetourl action navigateToURL(new URLRequest(" http://www.mydomain.com/
-
Cannot add instance to an empty cluster
Hi, I have a win2k ias9021 entreprise install with infrastructure on machineA. The install created 2 standalone instances. I then created a win2k ias903 core (OHS, OC4J and webcache) install on machineB. I then added this 903 instance to the ias9021
-
i have a website thru business catalyst...it was on a different persons muse account but now it is on mine...I can only publish to the temp but i need to go to actual site...
-
My computer won't run certain applications anymore
Recently my computer stopped running certain applications (Specifically Microsoft Word, and Rosetta Stone language programs). I thought that it might be related to the quicktime 7.2 update because it started acting up around the time that I downloade