Help with GF4 Ti4200 128mb DDR AGP8X VITO

i need help with this card.
when i play most of my games, the fonts will appear blur. and also sometimes some textures will appear jumbled up or distorted.
can anyone help me with this particular problem? Also, how do i check if my comp is running @ 533mhz FSb and 33mhz for the RAM? is it advisable to do so ?
my comp stats is :
P4 2.4ghz(FSB 533)
MSI 648 Max (SIS 648) AGP8x+DDR400+ATA-133
Kingston 512mb DDR 333
GF4 Ti4200 128mb DDR AGP8X VITO
Creative SB Audigy

well i'm new at this but here goes...
FREQ / VOLT Control
cpu/dram   -   by SPD
dram freq   -   167mhz
auto detect cpu fsb   -   enable
cpu freq   -   133mhz
agp/pci freq(mhz)   -   66/33
cpu multiple fac   -   locked
dram Vcore adjust   -   2.6v
cpu Vcore adjust   -   auto
PC Health
Vcore   -   1.456-1.472 V
+3.3V   -   2.944
+5.0V   -   4.999
+12V   -   11.876
-12   -   -11.672
-5   -   -5.178
Batt Voltage   -   3.056V
Advance Chipset Features
AGP Aperture Size   -   64M
should i change this to 128M since my graphic card is 128mb ?

Similar Messages

  • Help with GF4 TI4200

    Everytime I start window xp the message vbios.dll failed messages appear, and If i go into display and select those 2 additional MSI options it get an error and the thing closes... any solution to this?
    My cpu is
    P4 2.53
    Asus P4S8X
    Samsung 512 DDR
    MSI GF4 TI4200 128mb 8x AGP

    FFSabin,
    Use notepad to make a new file and put in it what I quoted below and then save it with the .reg extension.
    Quote
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINESOFTWARENVIDIA CorporationGlobalNVTweak]
    "Coolbits"=dword:ffffffff
    "NvCplEnableAGPSettingsPage"=dword:00000001
    "NvCplEnableAdditionalInfoPage"=dword:00000001
    "NvCplEnableClearViewPage"=dword:00000001
    That will open all the extra options in the Detonator4 Drivers including the Core and RAM Speeds for your GF4.
    Take Care,
    Richard

  • GeForce Ti4200 128MB DDR AGP8X

    AMD XP 2100
    512 RAM
    Phillips CDRW
    SoundBlaster Live + LiveDrive
    GeForce MX440 Video
    Internal Zip drive
    MSI 745 Ultra MB MS6561 w/ latest bios
    Will a XFX GeForce Ti4200 128MB AGP 8X TV Out and DVI Video
    card work well with MSI 745 Ultra MS 6561 board? I thought I saw some mention here about some voltage issue. TIA

    maws66,
    All 8X Vid Cards work on all 4X and 8X Mobos and Visa Versa.
    Take Care,
    Richard

  • Overclock Frequenciesw for ti4200 128MB DDR

    What has everyone o'clocked their ti4200 128MB DDR agp 4x versions to safely?

    yeah i got 310/590 on mine, but i ended up tradin it in and gettin the VTD8X (8x) with the bigger cooler and ramsinks, its sweet! i can run it at 315/630 all day long. even at standard clock speeds i get 11000 3dmarks now love it

  • Resolution problem with GF4 Ti4200-TD 128MB DDR

    I am having problems when I switch my display resolution to 640x480x32.
    It also affects any application which runs in the affected resolution.
    I tried re-installing the VGA card in its AGP slot and its drivers after removing my previous VGA card and its drivers.
    The driver that i am using for the MSI VGA card, which is 4.13.2890, is already updated via LiveUpdate, which is now 4.1.3.3000
    My system consists of:
      AOpen AX34 Pro Motherboard
      AGP 2X / 4X
      Intel Pentium III 800MHz
      512MB RAM
      Direct X 8.1
      Windows Me
    Looking forward to you reply. Thank you for your help.

    izel,
    Get the latest Via 4in1 Drivers and try running the Card in AGP 2X.  Do not expect much from the Via Apollo Pro 133 Chipset.  Lots of problems with the GART.
    Take Care,
    Richard

  • Help with G4 ti4200 problems.

    Hello all, thanks in advance for any help!
    I recently got a new system and have installed a MSI geforce4 ti4200 8x agp into it.  System was a fresh install, and had no problems for 2 days.  Now when I launch a game using Open GL or Direct 3D my whole PC reboots itself (counter-strike, diablo ii, ghost recon).  Nothing AT ALL has been changed in the 2 says since I installed the card/loaded the OS.  Im starting to run out of ideas, and I kinda want a game fix :(
    Systems Specs:
    Soyo Dragon KV7 mobo
    AMD XP 1400
    Kensington 256 MB RAM
    Windows XP Pro
    Ive tried the default drivers sent with the card (3.1.0.0 i think, ive tried the drivers from nvidia, 44.03)
    The only thing which is bothering me is the IRQ's,  IRQ 10 is being shared between my integrated soundcard, my integrated NIC, and the video card.  It wont let me change the settings, and I kinda need the Nic and sound for games
    Thanks again, post if you have ANY idea about this! ?(

    Quote
    Originally posted by wonkanoby
    how many irq\'s you got in total,how old the board
    is there apic and mps in the bios
    Im pretty sure all computers have 15 IRQ's?
    I have disabled the nic and the soundcard and im still rebooting, what the heck is apic and mps?

  • Video Capture with GF4 TI4200

    I seem to be haveing a few problems with video capture on my PC.
    I am using my TI4200 TV-in function from my VCR/CC to capture footage. I am also using the latest WDM drivers from the nvidia site.
    However everyso often i will get an annoying white block straight accross the screen and i try to recapture but it will happen, maybe somewhere else! what can i do?
    I have used ULEAD and WIN MM and IV WinPro to try this!  :(

    Installing the OLDER video capture drivers seems to have corrected my problem with the white bar.
    http://download.nvidia.com/Windows/23.11/WDM_1.08.exe
    When I tried the NEW video capture listed on the MSI pages for the 8X agp the HUE on the capture was WAY OFF. No Blues were present AND I still had the WHITE BAR syndrome.
    Why does the OLDER capture driver work and not the NEW ones. Seems like I am taking steps backwards to get a NEW video card to function properly. I am running Win2K with an AMD 2400, Gigabyte mb, 1gig ram, 1st hd 80 gig, 2nd hd, 120 gig, yamaha cdrw, 4x dvd burner.

  • Nvidia GF4 Ti4200 Driver problems!!!

    I have built up a new system with the following:
    MSI K7N2G-ILSR
    nVIDIA GF4 Ti4200 128mb DDR
    AMD XP2400+
    512MB 333 DDR
    PSU 350W
    WD 80GB Caviar (partitioned)
    Thermaltake Volcano 9 HSF
    I have installed XP-PRO (+SP1). The problem I have is the drivers.  First off I install the nFORCE 2 platform drivers - Fine, then I install the VGA Driver disc 40.72's. According to the installation, all is fine.  When the system reboots, we have a no go (blank screen). I then need to go back to last known settings....yeah, yeah!
    So far I have downloaded nearly all the drivers off the Nvidia site as well, using my other PC. (1MB CABLE).  Each one cause pretty much the same problem, including all the WHQL versions.
    I even downloaded the Nvidia nFORCE 2 platform package, which included a VGA driver.  This still caused the same result.
    My next step was to swap over with my other PC.  Once I inserted a GeForce2 64MB DDR PRO/GTS, all appears fine, the drivers install...no problem.
    I insert the GF4 Ti4200 into my ECS K7S5A, and low and behold all is fine here.....drivers, no problems.
    Any idea's......anyone??????
    Like compatibility problem or what..... I'm totally lost and confused now!!
    MARKONE.

    No, Markone from UK, novice PC builder..... :D
    Borgstif:  
    "uninstall the driver in safe mode and the Reg entry in WinXp "
    Explain exactly what you mean, I can choose start up in safe mode yes, but what will that do for me??
    gfilitti:  
    Not sure exactly what specs you want? this is my first build ever.  The PSU is a bog standard fitment inside an ATX Case, not a separate fitment.  Can you be more specific about "timing etc..."
    The Ti4200 is working fine in my less advanced ECS K7S5A machine......with 300W PSU.
    And likewise the Nforce 2 machine operates my Geforce 2 GTS/PRO also with no problems.
    Markone.

  • Video problem with Ti4200-128mb-AGP8x

    Here is my system;
    Asus p4p800 MB / integrated sound
    Intel p4 2.4ghz 800mhz FSB
    MSI GF4 Ti4200 128mb AGP8x
    Maxtor 30gb HDD
    LG 52x CD-rom
    Windows XP corp.
    IRQ's are all OK
    Power supply is 420watts
    nvidia video drivers 44.03(latest)
    I have video flickering in windows XP, and I can't run a game without the damn thing locking up about a few minutes into the game. I've tried every video configuration possible. Need help big time.....

    malek,
    List your IRQs and every device on each IRQ.
    Take Care,
    Richard

  • Slow gf4 Ti4200

    I'm having a problem with my gf4 Ti4200. It runs at slow framerates even at lower resolution and graphics during games. Ive tested with Nightfire and UT2003 and my friends PC with gf2 runs better. Its in 4x mode and ive been told about dma. whats dma?
    Are there any other suggestions anyone has that may increase my gf4's performance?
    AMD AthlonXP 2100+
    256mb DDR
    GF4 Ti4200 128mb 4x
    KT4V-L(MS-6712)
    Sonic explosion soundcard
    300W PSU

    Im beginning to lose my patience with this machine. Im not very technical with a computer so i really need your help. Ive managed to pin point the problem with 3Dmark2001. The highpolygon test with 8 lights shows the same problem i have with direct3D games, a very stunted (unsmooth) movement and i get 9.0Mtriangles/sec (Not sure if thats good or bad).
    Ive looked at other threads, and one struck me as odd about installing a new mouse seemed to interfer with the video card. The link is here and its the third post down:
    http://www.msi.com.tw/program/e_service/...10433boardid=9
    It sounded like he was having the same problem as me, and i have recently installed a new mouse and keyboard but hadn't registered that this could be a problem.
    I was hoping i had an incorrect direct3D setting or something to do wiht multilights or multipolygons. Opengl works fine, its just the direct3D. Im struggling here. Can someone please help me.
    Ginster

  • GF4 Ti4200/Vivo - Video capture pauses

    Hi All,
    Did a search and could not find anything on this topic.
    When capturing video from S-Video input, the video is not smooth.  Getting momentary 'pauses' that leads to very jerky video on playback.  I've checked the 'smooth video' option, but to no avail.
    System specs:
    MSI (oem'd Medion) MS-8889 GF4 TI4200 128MB Video card
    P4 2.66 CPU
    768M PC2700 DDR
    120GB Seagate Barracuda 7200RPM ATA133
    Original Shipped drivers for Video and WDM Capture (30.30 Video and 1.1 WDM)
    Any help would be appreciated.
    TIA,
    SteveK

    Well, I tried capturing with Virtualdub and it works much better (no pauses or stutters).  But there is a fairly large number of dropped frames (about 20% dropped).
    I've taken all of the standard steps to avoid dropped frames....no network access (no netowrk plugged in), no TSRs running, no antivirus, running with DMA enabled, hard disk is de-fragged (although I am running with a single hdd partitioned into 3 logical drives.  CPU is a P4-2.66Mhz, so there's plenty of horsepower.  The video card is an MSI-8889 (GF4 TI4200 8x w/128MB) ViVo. O/S is XP.  Mobo is an MSI-6701 (SiS Chipset).
    I believe the Vivo is stricly software capture, so the results are directly related to the software used for capture.
    Can anyone recommend (or use) another capture product for this type of card (with good results)?
    TIA,
    SteveK

  • GF4 Ti4200 won't overclock?

    Hey guys,
    This isn't so much a problem, more of a query. I just purchased an MSI Geforce4 Ti4200 128mb DDR and overall am very happy with it. Although whenever I attempt to take the core clock speed or the memory clock speed up (either using the advanced display properties or the MSI 3D! Turbo Experience) and reboot, the changes have never taken effect. They seem to just default back to the most stable settings (464/250). I know this card can go to 'at least' 510/270 but no matter wot I do it won't let me :-(
    Anyway hope someone can help me out. There's no hurry mind, the default settings are running everything fine atm :-)
    Cheers ppl

    MEMORY  
    128MB high-speed 128-bit DDR (Double Data Rate)
    10.4 GB/sec Memory Bandwidth, 444MHz Memory Clock Rate.
    CHIPSET  256-bit nVIDIA GeForce4 Ti 4400 GPU
    RAMDAC  350 MHz, 250MHz Core Clock
    I could be wrong here but the 64MB version has the 500mhz memory clock rate.
    Below is a link to support the statement.
    http://www.tech-report.com/reviews/2002q2/geforce4-ti4200/index.x?pg=2
    You are in fact OVERCLOCKED by 2mhz!
    Dennis B beat me too it while I was composing.... :D

  • Replacing GF2 with GF4

    Hello,
    Currently I have a MSI GF2 Ti (specs see sig) under Win XP.
    I have ordered a MSI GF4 Ti4200 128MB, Im expecting it tomorrow or the day after.
    I know how to replace a graphics card "physicly" but I dont know what to do about drivers.
    Do I have to uninstall my current drivers ? (29.42)
    I mean, Its still a Geforce and even a MSI card, won't Win XP get that ?
    If I have to uninstall, how do I do that ?
    Control panel, Detonator Destroyer ?
    In short, can someone give me a step-by-step to-do list plz  
    Thanx,
    Peter

    Thanx Ill do that,
    But, I want to put my "old" GF2 Ti in my second PC.
    Currently a PIII 450 + Radeon DDR.
    Do I have to uninstall Radeon drivers ?
    Or can I just put it in and install Detonator drivers over the radeon drivers ?
    This second PC runs Win98 SE.

  • GF4 Ti4200 and Win98 - HELP ! serious problem with drivers !

    Ok, I could successfully install the MSI GF4 Ti4200 128 in Windows 2000, no problem there, everything is working.
    I then installed Win98 as a second OS, I launch the drivers setup (from MSI CD) and I reboot as wanted by the setup. The PC reboots, the Win98 screen appears and suddenly...it reboots by itself, no message, no black screen.  I tried with other driver versions from NVidia and this time, I get a freezed black screen after the Win98 screen, I must press reset.  I had to enter the safe-mode to remove the drivers and get the usual 640x480 in 16 colors.
    What's going on ? I tried to change my bios parameters, disable the virus detection option, everything that could make problems ... but no success. I also tried a second Win98 installation, with DX 8.1 installed before the drivers but still the same problem.
    My system is AMD XP 2100 with Asus A7V333 motherboard - 300W for power, is the problem caused by some VIA chips ? I tried with their 4-1 drivers and stuff on the CD but it really doesn't want to work.
    Please help...

    after searching a bit on the forum, I found a thread where someone pointed out a problem caused by memory, greets to him.  I have 1 gb of ram and I added these lines to my system.ini :
    [vcache]
    MinFileCache=65536
    MaxFileCache=131072
    ChunkSize=2048
    NameCache=4096
    DirectoryCache=96
    ConservativeSwapFileUsage=1
    Values may change with more/less memory...And now it works perfectly in Win98.

  • HELP! severe probs w/ gf4 ti4200 128 8x

    it seems that just about every game I have installed on my new comp has had some video error.  quake 3 and return to castle wolfenstien had an array of dots on the screen.  and just about every other game i have installed (americas army, halo pc, etc) has frozen during a new game load and reset the comp.  i installed the latest drivers from nvidia, but it didnt help.  can anyone help??
    Running:
    P4 2.4Cghz w/ HT enabled
    Intel 865PERL MB
    512 SimpleTech DDR 400
    MSI GF4 TI4200 128 w/ 8x AGP + VIVO

    ok, i just went to best buy and bought an Antec 400 watt ps running 18a at 12v...AND IM STILL HAVING PROBLEMS!  a couple of games work at the lowest possible settings (quake 3, rtcw) and Halo works only in safe mode.  if i push the graphics any higher, they wont run.  Several other games (Americas Army) still wont run at all.  i am sure the vid card is the one with probs cause i have gotten a device error from it from some games.  this seems like a lost cause but if anyone could help it would be greatly appriciated.

Maybe you are looking for