Help with group by query

hi
i have this table
leadtbl
====
Fname | Lcode | goods
==============
AAA | 51 | XXX
AAA | 51 | DDD
AAA | 51 | FFF
AAA | 62 | EEE
AAA | 73 | PPP
BBB | 21 | CCC
BBB | 32 | SSS
CCC | 91 | DDD
CCC | 91 | ZZZ
CCC | 91 | FFFF
i need to see how many rows has everyone - but same Lcode.
i need to see this:
Fname | Count
=========
AAA | 3
BBB | 2
CCC | 1
thanks

Similar Messages

Need help with group by query with condition

Name
ID
A1
1
A2
1
A3
1
A1
1
A2
2
A2
3
A3
3
A1
4
A2
4
A3
5
I want to get result of total count where ID is less than 4
A1 - 2
A2 - 3
A3 - 2

Hi,
If you want to get 0 counts for names that don't have any low ids, then use a CASE expression instead of a WHERE clause.
You didn't post CREATE TABLE and INSERT statements for your sample data, so I'll use scott.emp to illustrate.
Say you want to see how many sals in each job are under 3000, like this:
JOB       UNDER_3_CNT
CLERK               4
SALESMAN            4
PRESIDENT           0
MANAGER             3
ANALYST             0
Here's one way to do that:
SELECT    job
,         COUNT (CASE WHEN sal < 3000 THEN 1 END) AS under_3_cnt
FROM      scott.emp
GROUP BY job
This shows that there are ANALYSTs and PRESIDENTs in the scott.emp table; there just don't happen to be any with sals under 3000.

Help with an SQL Query on the Logger

We are running UCCE 8.5(3) and need help with an SQL query. When I run the below I would also like to see skill group information(name preferably)? Any help would be greatly appreciated!
select * from dbo.t_Termination_Call_Detail where DateTime between '10-11-2012 00:00:00:00' and
'10-11-2012 23:59:59:59'

David, thanks for replying. Unfortunitly I don't know enough about SQL to put that into a query and have it return data. Would you be able to give an example on what the query would look like?

Need some help with the Select query.

Need some help with the Select query.
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
select single vkorg abgru from ZADS into it_rej.
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
        VKORG TYPE VBAK-VKORG,
        ABGRU TYPE VBAP-ABGRU,
       END OF IT_REJ.
This is causing performance issue. They are asking me to include the where condition for this select query.
What should be my select query here?
Please suggest....
Any suggestion will be apprecaiated!
Regards,
Developer

Hello Everybody!
Thank you for all your response!
I had changes this work area into Internal table and changed the select query. PLease let me know if this causes any performance issues?
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
I had removed the select single and insted of using the Structure it_rej, I had changed it into Internal table
select vkorg abgru from ZADS into it_rej.
Earlier :
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
Now :
DATA : BEGIN OF IT_REJ occurs 0,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
I guess this will fix the issue correct?
PLease suggest!
Regards,
Developer.

I need help with a SELECT query - help!

Hello, I need help with a select statement.
I have a table with 2 fields as shown below
Name | Type
John | 1
John | 2
John | 3
Paul | 1
Paul | 2
Paul | 3
Mark | 1
Mark | 2
I need a query that returns everything where the name has type 1 or 2 but not type 3. So in the example above the qery should bring back all the "Mark" records.
Thanks,
Ian

Or, if the types are sequential from 1 upwards you could simply do:-
SQL> create table t as
2 select 'John' as name, 1 as type from dual union
3 select 'John',2 from dual union
4 select 'John',3 from dual union
5 select 'Paul',1 from dual union
6 select 'Paul',2 from dual union
7 select 'Paul',3 from dual union
8 select 'Paul',4 from dual union
9 select 'Mark',1 from dual union
10 select 'Mark',2 from dual;
Table created.
SQL> select name
2 from t
3 group by name
4 having count(*) <= 2;
NAME
Mark
SQL>Or another alternative if they aren't sequential:
SQL> ed
Wrote file afiedt.buf
1 select name from (
2    select name, max(type) t
3    from t
4    group by name
5    )
6* where t < 3
SQL> /
NAME
Mark
SQL>Message was edited by:
blushadow

Help with the problem query

Hi,
I have another query running slow when executed from cognos. It is also not returning any output continues to execute,
with "Union15" as (
select distinct CASE WHEN(substr(to_char(FLOOR("EES_ENERGY_MASTER"."DISC_MON"/100)), 1, 4) IS NULL) OR (case substr(to_char(FLOOR("EES_ENERGY_MASTER"."DISC_MON"/100)), 5, 1) when '1' then 'Q1' when '2' then 'Q2' when '3' then 'Q3' when '4' then 'Q4' end IS NULL) THEN NULL ELSE (substr(to_char(FLOOR("EES_ENERGY_MASTER"."DISC_MON"/100)), 1, 4)||case substr(to_char(FLOOR("EES_ENERGY_MASTER"."DISC_MON"/100)), 5, 1) when '1' then 'Q1' when '2' then 'Q2' when '3' then 'Q3' when '4' then 'Q4' end ) END "QUARTER", "EES_ENERGY_MASTER"."PAT_KEY" "Cases_Using_Energy", 0 "Total_Cases"
from "MDM_DBA"."EES_ENERGY_MASTER" "EES_ENERGY_MASTER", "MDM_DBA"."EES_CONS_PROV" "EES_CONS_PROV"
where "EES_ENERGY_MASTER"."DISC_MON">=2006101 and "EES_ENERGY_MASTER"."PDCT_CAT"='Energy' and substr("EES_ENERGY_MASTER"."ICD_CODE", 1, 2)='68-gyn' and "EES_ENERGY_MASTER"."MANUFACTURER"='EES' and "EES_CONS_PROV"."CONS_06_09_YN" in ('N', 'Y') and "EES_ENERGY_MASTER"."PROV_ID"="EES_CONS_PROV"."PROV_ID" union
select CASE WHEN(substr(to_char(FLOOR("MVW_EES_ICD_STATS"."DISC_QTR")), 1, 4) IS NULL) OR (case substr(to_char(FLOOR("MVW_EES_ICD_STATS"."DISC_QTR")), 5, 1) when '1' then 'Q1' when '2' then 'Q2' when '3' then 'Q3' when '4' then 'Q4' end IS NULL) THEN NULL ELSE (substr(to_char(FLOOR("MVW_EES_ICD_STATS"."DISC_QTR")), 1, 4)||case substr(to_char(FLOOR("MVW_EES_ICD_STATS"."DISC_QTR")), 5, 1) when '1' then 'Q1' when '2' then 'Q2' when '3' then 'Q3' when '4' then 'Q4' end ) END "QUARTER", 0 "Cases_Using_Energy", count("MVW_EES_ICD_STATS"."CASES") "Total_Cases"
from "MDM_DBA"."MVW_EES_ICD_STATS" "MVW_EES_ICD_STATS", "MDM_DBA"."EES_CONS_PROV" "EES_CONS_PROV", "MDM_DBA"."EES_HOSP_CHG_PROV" "EES_HOSP_CHG_PROV"
where "MVW_EES_ICD_STATS"."DISC_QTR">=20061 and "MVW_EES_ICD_STATS"."ICD_GROUP"='68-gyn' and "EES_CONS_PROV"."CONS_06_09_YN" in ('N', 'Y') and "EES_HOSP_CHG_PROV"."PDCT_CAT"='Energy' and "EES_HOSP_CHG_PROV"."MANUFACTURER"='EES' and "MVW_EES_ICD_STATS"."PROV_ID"="EES_CONS_PROV"."PROV_ID" and "MVW_EES_ICD_STATS"."PROV_ID"="EES_HOSP_CHG_PROV"."PROV_ID"
group by CASE WHEN(substr(to_char(FLOOR("MVW_EES_ICD_STATS"."DISC_QTR")), 1, 4) IS NULL) OR (case substr(to_char(FLOOR("MVW_EES_ICD_STATS"."DISC_QTR")), 5, 1) when '1' then 'Q1' when '2' then 'Q2' when '3' then 'Q3' when '4' then 'Q4' end IS NULL) THEN NULL ELSE (substr(to_char(FLOOR("MVW_EES_ICD_STATS"."DISC_QTR")), 1, 4)||case substr(to_char(FLOOR("MVW_EES_ICD_STATS"."DISC_QTR")), 5, 1) when '1' then 'Q1' when '2' then 'Q2' when '3' then 'Q3' when '4' then 'Q4' end ) END)
select "T1"."C0" "levelkey", "T1"."C1" "Cases_Using_Energy", "T0"."C0" "Cases_Using_Energy1", "T1"."C2" "Total_Cases"
from (
select count(distinct "Union15"."Cases_Using_Energy") "C0"
from "Union15") "T0", (
select "Union15"."QUARTER" "C0", count(distinct "Union15"."Cases_Using_Energy") "C1", sum("Union15"."Total_Cases") "C2"
from "Union15"
group by "Union15"."QUARTER") "T1"The explain plan is as follows,
PLAN_TABLE_OUTPUT
| Id | Operation                             | Name                        | Rows | Bytes |TempSpc| Cost |
|   0 | SELECT STATEMENT                      |                              |     1 |    50 |       |    22 |
|   2 | TEMP TABLE TRANSFORMATION            |                              |       |       |       |       |
|   1 |   RECURSIVE EXECUTION                 | SYS_LE_2_0                   |       |       |       |       |
|   0 |    INSERT STATEMENT                   |                              | 3053 |   128K|       | 1372 |
|   1 |     LOAD AS SELECT                    |                              |       |       |       |       |
|   2 |      SORT UNIQUE                      |                              | 3053 |   128K|   376K| 1372 |
|   3 |       UNION-ALL                       |                              |       |       |       |       |
|* 4 |        HASH JOIN                      |                              | 3052 |   128K|       |   185 |
|* 5 |         TABLE ACCESS FULL             | EES_CONS_PROV                |   622 | 3732 |       |     2 |
|* 6 |         TABLE ACCESS BY INDEX ROWID   | EES_ENERGY_MASTER            | 3055 |   110K|       |   182 |
|* 7 |          INDEX RANGE SCAN             | IDX_ENERGY_PDCT_CAT          | 1978 |       |       | 2478 |
|   8 |        SORT GROUP BY                  |                              |     1 |    40 |       | 1160 |
|* 9 |         TABLE ACCESS BY INDEX ROWID   | EES_HOSP_CHG_PROV            |     4 |    72 |       |     1 |
| 10 |          NESTED LOOPS                 |                              |     1 |    40 |       | 1157 |
| 11 |           NESTED LOOPS                |                              |     1 |    22 |       | 1156 |
|* 12 |            TABLE ACCESS BY INDEX ROWID| MVW_EES_ICD_STATS            |     1 |    16 |       | 1155 |
|* 13 |             INDEX RANGE SCAN          | MVWICDSTATS_DISCQTR_IDX      |    13M|       |       | 26068 |
|* 14 |            TABLE ACCESS BY INDEX ROWID| EES_CONS_PROV                |     1 |     6 |       |     1 |
|* 15 |             INDEX UNIQUE SCAN         | EES_CONS_PROV_PK             |     1 |       |       |       |
|* 16 |           INDEX RANGE SCAN            | PROV_ID_IDX_2                |    65 |       |       |     1 |
|   3 |   MERGE JOIN CARTESIAN                |                              |     1 |    50 |       |    22 |
|   4 |    VIEW                               |                              |     1 |    13 |       |     3 |
|   5 |     SORT GROUP BY                     |                              |     1 |    13 |       |       |
|   6 |      VIEW                             |                              | 3053 | 39689 |       |     3 |
|   7 |       TABLE ACCESS FULL               | SYS_TEMP_0FD9D68B3_C112F95D | 3053 |   110K|       |     3 |
|   8 |    VIEW                               |                              |     1 |    37 |       |    19 |
|   9 |     SORT GROUP BY                     |                              |     1 |    37 |       |    19 |
| 10 |      VIEW                             |                              | 3053 |   110K|       |     3 |
| 11 |       TABLE ACCESS FULL               | SYS_TEMP_0FD9D68B3_C112F95D | 3053 |   110K|       |     3 |
Predicate Information (identified by operation id):
   4 - access("EES_ENERGY_MASTER"."PROV_ID"="EES_CONS_PROV"."PROV_ID")
   5 - filter("EES_CONS_PROV"."CONS_06_09_YN"='N' OR "EES_CONS_PROV"."CONS_06_09_YN"='Y')
   6 - filter("EES_ENERGY_MASTER"."DISC_MON">=2006101 AND SUBSTR("EES_ENERGY_MASTER"."ICD_CODE",1,2)='68-gyn'
              AND "EES_ENERGY_MASTER"."MANUFACTURER"='EES')
   7 - access("EES_ENERGY_MASTER"."PDCT_CAT"='Energy')
   9 - filter("EES_HOSP_CHG_PROV"."PDCT_CAT"='Energy' AND "EES_HOSP_CHG_PROV"."MANUFACTURER"='EES')
12 - filter("MVW_EES_ICD_STATS"."ICD_GROUP"='68-gyn')
13 - access("MVW_EES_ICD_STATS"."DISC_QTR">=20061 AND "MVW_EES_ICD_STATS"."DISC_QTR" IS NOT NULL)
14 - filter("EES_CONS_PROV"."CONS_06_09_YN"='N' OR "EES_CONS_PROV"."CONS_06_09_YN"='Y')
15 - access("MVW_EES_ICD_STATS"."PROV_ID"="EES_CONS_PROV"."PROV_ID")
16 - access("MVW_EES_ICD_STATS"."PROV_ID"="EES_HOSP_CHG_PROV"."PROV_ID")
Please help with some solution.

OK: the third parameter of the SUBSTR function indicates the (maximum) length of the returnd string.
Therefore SUBSTR("EES_ENERGY_MASTER"."ICD_CODE",1,2) could possibly be '68' , but never '68-gyn'.
'68-gyn' is just 4 characters too long.
Urs

Need help with writing a query with dynamic FROM clause

Hi Folks,
I need help with an query that should generate the "FROM" clause dynamically.
My main query is as follows
select DT_SKEY, count(*)
from *???*
where DT_SKEY between 20110601 and 20110719
group by DT_SKEY
having count(*) = 0
order by 1; The "from" clause of the above query should be generated as below
select 'Schema_Name'||'.'||TABLE_NAME
from dba_tables
where OWNER = 'Schema_Name'Simply sticking the later query in the first query does not work.
Any pointers will be appreciated.
Thanks
rogers42

Hi,
rogers42 wrote:
Hi Folks,
I need help with an query that should generate the "FROM" clause dynamically.
My main query is as follows
select DT_SKEY, count(*)
from *???*
where DT_SKEY between 20110601 and 20110719
group by DT_SKEY
having count(*) = 0
order by 1; The "from" clause of the above query should be generated as below
select 'Schema_Name'||'.'||TABLE_NAME
from dba_tables
where OWNER = 'Schema_Name'
Remember that anything inside quotes is case-sensitive. Is the owner really "Schema_Name" with a capital S and a capital N, and 8 lower-case letters?
Simply sticking the later query in the first query does not work.Right; the table name must be given when you compile the query. It's not an expression that you can generate in the query itself.
Any pointers will be appreciated.In SQL*Plus, you can do something like the query bleow.
Say you want to count the rows in scott.emp, but you're not certain that the name is emp; it could be emp_2011 or emp_august, or anything else that starts with e. (And the name could change every day, so you can't just look it up now and hard-code it in a query that you want to run in the future.)
Typically, how dynamic SQL works is that some code (such as a preliminary query) gets some of the information you need to write the query first, and you use that information in a SQL statement that is compiled and run after that. For example:
-- Preliminary Query:
COLUMN     my_table_name_col     NEW_VALUE my_table_name
SELECT     table_name     AS my_table_name_col
FROM     all_tables
WHERE     owner          = 'SCOTT'
AND     table_name     LIKE 'E%';
-- Main Query:
SELECT     COUNT (*)     AS cnt
FROM     scott.&my_table_name
;This assumes that the preliminary query will find exactly one row; that is, it assumes that SCOTT has exactly one table whose name starts with E. Could you have 0 tables in the schema, or more than 1? If so, what results would you want? Give a concrete example, preferably suing commonly available tables (like those in the SCOTT schema) so that the poepl who want to help you can re-create the problem and test their ideas.
Edited by: Frank Kulash on Aug 11, 2011 2:30 PM

Help with grouping similar lines

Hi,
could you help me with one sql query in Oracle 11g.
I have data with two columns - timestamp, counter
4.7.2012 10:01, 13
4.7.2012 10:03, 0
4.7.2012 10:04, 0
4.7.2012 10:05, 0
4.7.2012 10:21, 3
4.7.2012 10:33, 0
4.7.2012 10:51, 6
What I need to get is to group lines with counter = 0 which are next to each other and keep the info about start and end of the timestamp.
so first I need to use rank
line_number, timestamp, counter, rank
1, 4.7.2012 10:01, 13, 0
2, 4.7.2012 10:03, 0, 1
3, 4.7.2012 10:04, 0, 2
4, 4.7.2012 10:05, 0, 3
5, 4.7.2012 10:21, 3, 0
6, 4.7.2012 10:33, 0, 0
7, 4.7.2012 10:51, 6, 0
and then group lines 2, 3, 4 into one line, because line's counter=0 and there is more then one line in the group.
so the result would be
4.7.2012 10:01, 13
4.7.2012 10:03 - 4.7.2012 10:05, 0
4.7.2012 10:21, 3
4.7.2012 10:33, 0
4.7.2012 10:51, 6
Thanks a lot for any ideas,
D.
Edited by: dusoo on Jul 11, 2012 6:37 AM

Hi,
You can do something like this:
WITH     got_grp     AS
     SELECT     tmstmp, counter
     ,     ROW_NUMBER () OVER ( ORDER BY      tmstmp)
          - ROW_NUMBER () OVER ( PARTITION BY counter
                                    ORDER BY         tmstmp
                       )     AS grp
     FROM    table_x
--     WHERE     ...     -- If you need any filtering, do it here
SELECT       MIN (tmstmp) || CASE        -- You'll probably want to use TO_CHAR here, and 2 lines below
                              WHEN COUNT (*) > 1
                     THEN '-' || MAX (tmstmp)
                          END
,         counter
FROM       got_grp
GROUP BY counter, grp
ORDER BY MIN (tmstmp)
;TIMESTAMP is a keyword in Oracle 9 (and up), so it's not a good column name. I used TMSTMP instead.
This assumes that tmstmp is unique. If not, you'll have to add something to the analytic ORDER BY clauses.
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
Explain, using specific examples, how you get those results from that data. For example, what defines a "group" in this problem? It seems to be consectuive rows (in order by tmstmp), but what else? Will all members of a gropup have the same value for counter, regardless of the difference in tmstmp? (That's what I assumed above.) Will all members of a group have tmstmp within 1 minute of another, regardless of counter?
Always say which version of Oracle you're using.
See the forum FAQ {message:id=9360002}

Help in group by query

Hi,
Please help me in the following query.
SELECT
a.bcast_id ,
a.bcast_file_nm ,
a.clickthru_url_cd ,
a.list_id ,
a.prs_id ,
a.resp_cd ,
a.run_seq ,
COUNT(a.resp_cd) ,
c.src_grp_cd ,
b.site_cd
FROM
gca_cbx_response_test a ,
gca_program_run_hist b ,
campaign_master c
WHERE
a.list_id=b.list_id
AND
a.run_seq=b.campaign_run_seq
AND
b.campaign_cd=c.campaign_cd
GROUP BY
a.bcast_id ,
a.bcast_file_nm ,
a.clickthru_url_cd ,
a.list_id ,
a.prs_id ,
a.resp_cd ,
a.run_seq ,
c.src_grp_cd ,
b.site_cd
HAVING
a.resp_ts
BETWEEN
to_date('04-AUG-2005 00:01:32','DD-MON-YYYY HH24:MI:SS')
AND
to_date('04-AUG-2005 00:01:32','DD-MON-YYYY HH24:MI:SS');
But the following group by query is throwing error that a.resp_ts is not a group by function.
But i don't want to add a.resp_ts in group by clause.
Please help me in this query.
Thanks,
Dilip

How about:
SELECT a.bcast_id ,
       a.bcast_file_nm ,
       a.clickthru_url_cd ,
       a.list_id ,
       a.prs_id ,
       a.resp_cd ,
       a.run_seq ,
       COUNT(a.resp_cd) ,
       c.src_grp_cd ,
       b.site_cd
FROM   gca_cbx_response_test a ,
       gca_program_run_hist b ,
       campaign_master c
WHERE a.list_id=b.list_id
AND    a.run_seq=b.campaign_run_seq
AND    b.campaign_cd=c.campaign_cd
AND    a.resp_ts BETWEEN to_date('04-AUG-2005 00:01:32','DD-MON-YYYY HH24:MI:SS')
                 AND to_date('04-AUG-2005 00:01:32','DD-MON-YYYY HH24:MI:SS');
GROUP BY a.bcast_id ,
         a.bcast_file_nm ,
         a.clickthru_url_cd ,
         a.list_id ,
         a.prs_id ,
         a.resp_cd ,
         a.run_seq ,
         c.src_grp_cd ,
         b.site_cd;

Help with Inner Join query in SQL

Hope someone can help with this, as this is quite an involved project for me, and I'm just about there with it.
My table structure is :
table_packages
packageID
package
packageDetails
etc
table_destinations
destinationID
destination
destinationDetails
etc
table_packagedestinations
packageID
destinationID
..so nothing that complicated.
So the idea is that I can have a package details page which shows the details of the package, along any destinations linked to that package via the packagedestinations table.
So this is the last part really - to get the page to display the destinations, but I'm missing something along the way....
This is the PHP from the header, including my INNER JOIN query....
PHP Code:
<?php
$ParampackageID_WADApackages = "-1";
if (isset($_GET['packageID'])) {
$ParampackageID_WADApackages = (get_magic_quotes_gpc()) ? $_GET['packageID'] : addslashes($_GET['packageID']);
$ParamSessionpackageID_WADApackages = "-1";
if (isset($_SESSION['WADA_Insert_packages'])) {
$ParamSessionpackageID_WADApackages = (get_magic_quotes_gpc()) ? $_SESSION['WADA_Insert_packages'] : addslashes($_SESSION['WADA_Insert_packages']);
$ParampackageID2_WADApackages = "-1";
if (isset($_GET['packageID'])) {
$ParampackageID2_WADApackages = (get_magic_quotes_gpc()) ? $_GET['packageID'] : addslashes($_GET['packageID']);
mysql_select_db($database_connPackages, $connPackages);
$query_WADApackages = sprintf("SELECT packageID, package, costperpax, duration, baselocation, category, dateadded, agerange, hotel, educational_tours, field_trips, corporate_outings, plant_visits, budget_package, rollingtours, teambuilding, description, offer FROM packages WHERE packageID = %s OR ( -1= %s AND packageID= %s)", GetSQLValueString($ParampackageID_WADApackages, "int"),GetSQLValueString($ParampackageID2_WADApackages, "int"),GetSQLValueString($ParamSessionpackageID_WADApackages, "int"));
$WADApackages = mysql_query($query_WADApackages, $connPackages) or die(mysql_error());
$row_WADApackages = mysql_fetch_assoc($WADApackages);
$totalRows_WADApackages = mysql_num_rows($WADApackages);
$colname_educationalDestinations = "1";
if (isset($_GET['PackageID'])) {
$colname_educationalDestinations = (get_magic_quotes_gpc()) ? packageID : addslashes(packageID);
mysql_select_db($database_connPackages, $connPackages);
$query_educationalDestinations = sprintf("SELECT * FROM destinations INNER JOIN (packages INNER JOIN packagedestinations ON packages.packageID = packagedestinations.packageID) ON destinations.destinationID = packagedestinations.destinationID WHERE packages.packageID = %s ORDER BY destination ASC", GetSQLValueString($colname_educationalDestinations, "int"));
$educationalDestinations = mysql_query($query_educationalDestinations, $connPackages) or die(mysql_error());
$row_educationalDestinations = mysql_fetch_assoc($educationalDestinations);
$totalRows_educationalDestinations = mysql_num_rows($educationalDestinations);
?>
And where I'm trying to display the destinations themselves, I have :
<table>
        <tr>
                 <td>Destinations :</td>
            </tr>
           <?php do { ?>
        <tr>
             <td><?php echo $row_educationalDestinations['destination']; ?></td>
        </tr>
        <?php } while ($row_educationalDestinations = mysql_fetch_assoc($educationalDestinations)); ?>
</table>
If anyone could have a quick look and help me out that would be much appreciated - not sure if its my SQL at the top, or the PHP in the page, but either way it would be good to get it working.
Thanks.

First off, you need to get the database tables so that there is a relationship between them.
In fact, if there is a one to one relationship, then it may be better to store all of your information in one table such as
table_packages
packageID
package
packageDetails
destination
destinationDetails
etc
If there is a one to many relationship, then the following would be true
packages
packageID
package
packageDetails
etc
destinations
destinationID
packageID
destination
destinationDetails
etc
The above assumes that there are many destinations to one package with the relationship coloured orange.
Once you have the above correct you can apply your query as follows
SELECT *
FROM packages
INNER JOIN destinations
ON packages.packageID = destinations.packageID
WHERE packages.packageID = %s
ORDER BY destination ASC
The above query will show all packages with relevant destinations

Need help with LikeFilter for querying the keyset instead of value

Hi,
I'm looking for help with the LikeFilter.
I need to query the cache to get all entries with key starting with a particular string.
I could see samples using LikeFilter for querying the values in the cache but not the keyset.
Can someone help?
E.g:
Cache Entries:
abc123 - value1
abc234 - value2
bcd123 - value3
I want to get all entries with key starting with 'abc'.
thanks,
rama.

NJ, thanks for the quick reply.
I tried something similar (as below) but this code gives me 'java.lang.NoClassDefFoundError: com/tangosol/util/ValueExtractor'.
KeyExtractor extractor = new KeyExtractor("getKey");
Filter filter = new LikeFilter(extractor, id+":%",'-',false);
-rama.
Edited by: 911950 on Feb 2, 2012 1:18 PM

Help with a PowerPivot query

Hi,
I've got a server audit log in PowerPivot (114,000 rows) which I provide some basic reporting from (PowerPivot is not my specialist subject so go easy). What I now need to perform a Distinct filter, but can't get the logic right. Basically the log
as two bits of information, 1) is the source of the job and 2) if it was a success or failure. What I need to do is to find all of the Source items that have never completed sucessfully. Any ideas on what formula is best to use, or
do I need to split in to multiple sheets and create a table relationship?
Source,Status
======,======
Source1,Fail
Source1,Fail
Source1,Success
Source2,Fail
Source3,Fail
Source3,Success
So in the above example, I would only expect the filter to show me Source2
Thanks
Alex

Hi Alex,
using Power Query instead, it would work like this:
Once you've pushed your table to PQ, add a column "helper" with value=1.
Then pivot on "Status", taking "helper"-column into "values column"
(hope translation is understandable, as I'm using localized Version & translation via "Quick info" isn't working in the PQ menu)
Then filter on column "Success" = blank.
Imke

Help with a update query from a subquery

Hello All,
I wanted to see if someone can help me with an update query.
I need to grab a latitude & longitude from a the same user that is in two accounts. therefore i am trying to update lat/long in a users table for one account based off of the same user in another account. I am matching the users up by phone number and last name. I tried a subquery but am having difficulty.
I was thinking of something like the following:
update users
set lat = getlat, long = getlong
inner join (select lat as getlat, long as get long from users where account_id = '1')
on phone = phone and last name = lastname
where account_id = '2' and lat IS NULL and long IS NULL
Am I going in the right direction???
Thanks in advance for any assistance!!!!

What difficulty are you having? Have you tried what you posted and get an error?
Although someone may be able to give you sql advice here, I would try posting this over at Stack Overflow as its not really related to Coldfusion.

Help With Geodetic Rectangular Query Please

I'm new to spatial so I appreciate your help.
I have a 3D geodetic coordinate system defined that is index in 2D (lon & lat).
I want to do a query that returns all points (lat, lon, alt) within the rectangle described by the query.
I read in the "Oracle Spatial User's Guide" that this rectangle must have 5 points (since I'm using geodetic).
I have not found a good example of how to format the query. Can you help with an example?

here is an example which assume a wgs-84 coordinate system (srid=8307). Note that altitude will be ignored.
select col1,col2,etc
from geom_table
where sdo_relate(geom,mdsys.sdo_geometry(2003,8307,NULL,
mdsys.sdo_elem_info_array(1,1003,1),
mdsys.sdo_ordinate_array(-70.05,40.8, -69.05,40.8, -69.05,41.2, -70.05,41.2, -70.05,40.8)),
'mask=anyinteract querytype=window') = 'TRUE';

Need help with the following query

I have the following data
INVOICE_ID PAID_AMT PYMNT_GROSS_AMT DISCOUNT
10151 1375 1375 55
10151DC -44.81 -44.81 0
20017 25 25 7
Ok the data I want to grab the discount field is paid_amt = pymnt_gross_amt and discount <> 0. If however there is another invoice_id out there (same invoice ID except with a DC appended to it like 10151DC) then you want to select the differece between the discount field without the DC and the Invoice ID with the DC the paid_amt field.
So the results would be.
Invoice_ID Discount
10151 10.19
20017 7
Thanks for all your help!

Why scan same table twice when it can be achived using single scan :
Hope this helps :
with inv_data as
(select '10151' invoice_id,
1375 paid_amt,
          1375 pymnt_gross_amt,
          55 discount from dual
union all
select '10151DC' invoice_id,
-44.81 paid_amt,
          -44.81 pymnt_gross_amt,
          0 discount from dual
union all
select '20017' invoice_id,
25 paid_amt,
          25 pymnt_gross_amt,
          7 discount from dual)
select replace(invoice_id,'DC') invoice_id,
sum(case when invoice_id like '%DC' then pymnt_gross_amt
     else discount end) discount
from inv_data
group by replace(invoice_id,'DC')
INVOICE DISCOUNT
10151 10.19
20017 7
2 rows selected.

Help with group by query

Similar Messages

Maybe you are looking for