Help with hdmi

I just bought a 39 inch insignia hdmi 1080p LCD. What I want to ask if there is a good hdmi selector so I can hook up my PS3 and XBOX360 and get the full 1080p. It only had one output for the hdmi.

any HDMI selector will work. There is not one that supports 1080i or 720p and another that supports 720p/1080i/1080p. All it is doing is passing the signal through.

Similar Messages

Need Help with DVD recorder (HDMI) to record off DVR

I purchased a philips dvd recorder a few years ago and need help in setting up to record my DVR program recordings. The philips user manual is not very helpful being I'm trying to set-up with just using HDMI cables. I have a HDTV (Vizio) with a HDMI port; a DVD recorder with HDMI port and my Verizon set-top box have a HDMI port. How do i get it all to work and be able to record/copy programs from DVR to my DVD recorder? Do anyone have suggestions on how to set up wiring. Thanks.
Solved!
Go to Solution.

First keep in mind that DVD is not an HD format, so you will not be able to record HD shows in HD; they will be in letterboxed 4:3.
The FiOS STB only has one HDMI (out) port. Therefore, you will need to use some other output from the STB to the DVD recorder. Component, or even composite/RCA, because it's not going to record in HD anyway to DVD, will work just fine. Then you want to set your DVD player to whatever input you used to connect from the STB; i.e. mine uses "Input 1" for my composite connection.
If you turn on your STB and DVD, this will record whatever the STB is outputting to a DVD if you press record on the DVD recorder. This includes all of the program menus and any other on-screen graphics on the STB, and this means you cannot change the channel if you are recording from your STB. You can shut your TV off, but you will not be able to watch another show while recording one to DVD.
Your DVD player might give you an HDCP message at first when the recording starts if it's getting an HD input, but that should go away after a few seconds, at least for my Panasonic DVD recorder with a composite connection.

Help with getting high quality DVDs from AVCHD footage

Hello,
I know enough about video editing with PE7 to be dangerous, and was hoping someone could help me out.
My question is regarding getting the highest quality standard DVD from AVCHD footage. I have a Sony HDR-SR12 camcorder recording in AVCHD. I am editing footage natively in AVCHD with PE7 on a quad core system. No problem with that. However, when I export to standard DVD the quality of the video goes down drastically. (Yes, I know burning to Blu-ray would give me higher quality, but I am giving this DVD to a friend who doesn't have Blu-ray).
So far I have tried starting my project in both HD 1080i 30 5.1 channel:
General
Editing mode: HDV 1080i
Timebase: 29.97 fps
Video Settings
Frame size: 1440h 1080v (1.333)
Frame rate: 29.97 frames/second
Pixel Aspect Ratio: HD Anamorphic 1080 (1.333)
and Full HD 1080i 30 5.1 channel:
General
Editing mode: HD 1080i
Timebase: 29.97 fps
Video Settings
Frame size: 1920h 1080v (1.000)
Frame rate: 29.97 frames/second
Pixel Aspect Ratio: Square Pixels (1.0)
But I see no discernable difference in the quality of my output onto DVD.
This is where my knowledge is lacking...how can I get the best quality output from my AVCHD onto a standard DVD? Is there some format I can convert to first, and then burn to DVD? Also, I am willing to break the footage into a couple of DVDs to improve the quality, but I don't know how or what to do for that.
My footage looks REALLY great when viewing from the HDR-SR12 direct to HD TV with HDMI cable, but not very good on the DVD. My footage is of a ballet recital, and I lose definition in the faces, costumes, etc on the DVD output.
Any help is appreciated! Thanks!
Gina

Hey Gina,
This may be a year late, but as I have been pulling my hair out trying to solve this problem for the last 48 hours I finally did find somewhat of a work around, but it requires Adobe PP CS4.2.
There is a plug-in here:
http://www.mainconcept.com/site/prosumer-products-4/mpeg-pro-hd-7850/features-7861.html
Which will actually output your edit as an AVCHD file. You can then burn this straight to an AVCHD using Nero 9 and keep the highquality level of your clips and not need Blu-Ray. The DVD player will need to be AVCHD capable, but I just bought one of those for $40 as compared to the $200+ of most Blu-Ray players.
Hope that helps.
Regards,
DSW

What is the problem with 15-inch Macbook Pro model 2011 after connecting to TV with HDMI chord?

Today we connected a 15-inch Macbook Pro model 2011 with HDMI chord to an Insigna Television. We plugged and unplugged couple of times. But recently the macbook pro is having technical issues. The following symptoms are:
1. Macbook pro turns on and off
2. The screen stays blue and keeps loading but does not load to the desktop so you can't access to anywhere
3. The screen sometimes becomes fuzzy and the apple logo that shows before it loads to the desktop is fuzzy
4. Sometimes fuzzy lines appear on the screen like you see on television when there's a bad signal
5. The screen stays blue
6. Sometimes little specks appear on the screen
Only thing we did was turn it off and restart but it still leads to the same symptoms above.
Does anyone have any clue what caused this problem? I am guessing it is due to the connection to the HDMI chord, since we didn't turn the macbook on and off when we plugged it, rather we just unplugged and plugged the chord while the macbook is running.
Another theory might be watching movies from an online source but the first theory seems to make more sense.
We scheduled a meeting with the genius bar tomorrow but does anyone might have any clue? And also any ideas how to fix this? This is an emergency because there are important files on the macbook we didn't back up and we hope the files are safe and we need to use the macbook ASAP. Let us know anything that might have caused this and/or any solutions or help. That would be appreciated and thank you.

Hey there! Welcome to the Discrete GPU issue clube ... post your relate here >>> 2011 MacBook Pro and Discrete Graphics Card
And for GOD SAKE! Call Apple to tell them that you're another user with such problem ... that action can improve a future recall. BTW the fix price for your problem is around U$ 1000,00 ... that's the meaning of the recall attempt

Help with display quality (LCD TV)

I've hooked up my Mac mini to my Samsung 32" LCD TV via HDMI cable.
The overall quality is just far from desireable and is taking away all of the fun from using this new mac.
I set the resolution output to 720p, which is what the TV supports. So that's good.
I played slightly with the Contrast and Brightness on the TV settings.
But I must be missing something. Although the image is sharp, it's very difficult to read from 6ft away, pictures look terrible (seeing the same picture on a different computer and monitor is so much more revealing), and the display is bad for everything basically.
Please help with any settings suggestions or perhaps a detailed guideline for my setup.
I started to configure a color profile on the display settings but the results weren't that great and I reverted to default. Too many subtle changes. My colorblindness probably doesn't help.
Thanks.

Thanks for the response.
It's the latest Mac Mini with 2.5ghz i5, AMD Radeon HD 6630M, and 8GB RAM.
I am familiar with the "Just Scan" setting under picture size on the Samsung TV.
I'll look for the digital noise reduction.
Are there complete guides with recommended settings for different setups? Or maybe even general, that would help me here?
Thanks.

HT4241 No signal on external monitor with HDMI on MacBook Pro (13-inch, Late 2011)

HI i have a MacBook Pro (13-inch, Late 2011). some days ago i connected it to my LG plasma 60" with HDMI. i used the DVI --> HDMI converter from apple. the it worked fine and i could se films om the tv. but now nothing happens when i connect the mac. help??

Hello,
I had this problem with y Macbook Air and an Asus LED monitor 21.5". The very first time I tried the two together, it worked perfectly. The second time it didn't work and I tried different things to make that "No HDMI signal" go away.
The only thing that worked for me was connecting both devices OFF, once connected I turned the monitor ON first and then started my Macbook Air.
I really hope this helps some of you.
Good luck

Audio from MacBook to TV with HDMI not working?

I recently purchased a HDMI cord for my MacBook, but I don't seem to get any audio from my TV when it's hooked up. I've had no problems getting the image to display on my TV, but the sound won't work. I've already gone through System Preferences to see if there was even an option for output and the only one I saw was for my internal speakers. I had previously just hooked up my computer to a set of external speakers by by TV with an auxiliary cable, but I no longer have the speakers and need to find a different option.
Many thanks in advance for your help!

The Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody have a Mini DisplayPort. The Early 2006 model 1,1 through Early 2008 model 4,1s plus the Early and Mid 2009 model 5,2s have Mini-DVI ports.
The Mini-DVI to HDMI doesn't carry audio. If you connect the MacBook using a Mini-DVI to HDMI adapter you will probably need to use external speakers or a 3.5mm stereo headphone jack to RCA sound plugs connected to a stereo system for audio if your TV doesn't have separate RCA input plugs or a 3.5mm stereo input plug for audio with the HDMI plug.
The Mini DisplayPort to HDMI doesn't carry audio unless you have the Mid 2010 model 7,1 and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI. Check your TV manual to see if it has audio plugs that work with one of the HDMI ports.
If you have the Late 2008 model 5,1 Aluminum Unibody or Late 2009 model 6,1 White Unibody with the Mini DisplayPort rather than the Mini-DVI there is an adapter that uses the Mini DisplayPort and a USB port to combine video and audio to HDMI. It's only 2 channel stereo not 5.1 Dolby Surround.
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=5969&seq=1&format=2

Can I use the HDMI out on a HP ALL IN ONE TOUCHSCREEN Desktop to connect a second monitor with HDMI

Can I use the HDMI out on a HP ALL IN ONE TOUCHSCREEN Desktop to connect a second monitor with HDMI in without any additional software or graphics adaptor. I have a 520-1070
HP - 23" Touch-Screen TouchSmart All-In-One Computer - 8GB Memory - 2TB Hard Drive ? I used a HDMI to HDMI cable and the monitor was not recognized.

Here are the specs for your HP TouchSmart 520-1070 Desktop Computer. As previously stated your computer Doesn't have a HDMI output, instead it has a HDMI input. This is designed to let you connect a game console, a DVD/Bluray player, etc. to use as a monitor.
If you wish to conect a second monitor to your computer, you will need to use a USB-to-video adapter such as the EVGA UV Plus+ UV39 or EVGA UV Plus+ UV19. Using an adapter like these with the touch feature of your computer may cause issues with pointer control and you may need to disable the touch feature to use "extended desktop".
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Please help with a new dual purpose PC build

Hi everybody in AdobeLand!
I've been reading various boards and hardware sites and have started piecing together a dual purpose computer system. It will be used for both video editing (of pre-shot hacked, high bitrate I-Frame Panasonic GH2 DSLR and camcorder footage using the AVCHD codec @ 1080p 24 and 30 fps) and webcasting/streaming purposes. I would build two computers for each task, but it's just not in the budget right now. I'm already stretching things as is.
I'm still not sure if I will be using Adobe Premiere or Sony Vegas Pro 12 yet, though it seems like they organize their folders and file structures about the same. Adobe's cloud service has me a bit scared off right now. This new scheme feels like they have their hand purpetually in your wallet, which does not sit well with me. I may still go with Vegas 12 just to avoid that hassle right now. Help guide me here, experts! Telestream's Wirecast is being used for multi-cam switching and graphics for live and pre-recorded material being compressed and streamed.
Back on topic:
Here's the build as of right now...
OS: Windows 7 64-Bit Professional (Windows 8 absolutely sucks!)
CPU: Intel i7-4930k 6-Core Ivy Bridge (own)
Motherboard: Asus P9X79 Pro (own)
Memory: Crucial Ballistix 1.35v Sport DDR3L @ 32 GB (own)
GPU: EVGA GTX 770 FTW w/ 4 GB (will buy another HD monitor at a later date, hence the 4GB memory)
Case: Fractal Design XL R2 Full Tower
CPU Cooling: Noctua NH-D14 w/ SE2011 Bracket
PSU: Corsair RM1000 Quiet Series / 80 Plus Gold / 1000 Watts
Monitor: Dell U2412M Ultrasharp 24 inch / 1920x1200
Optical Drive: LG Blu-ray Writer
Keyboard: Microsoft 4000 Ergonomic
HDMI capture cards: Blackmagic Designs Decklink Mini (x2)
Storage:
I bought two Samsung 840 Pro SSD drives: one 128 GB and one 256 GB
Thinking about possibly 2 (maybe 3-4 if I really stretch) Seagate ST3000DM001 3TB HDD's.
I could sure use your help with any advise on arranging the storage to get the best bang vs. buck in speed and storage utilization (Wirecast can be setup to record live webcast sessions at 720p or 1080p in compressed files... probably no more than 120 minute webcasts... so that comes into play as well). Just don't have the funds for an uber-expensive RAID controller card right now.
Any opinions overall on the parts for the current build? I still have time to send back and exchange anything already purchased.
Thank you for your time and consideration.

What do you not understand from:
With all the reading and writing going on, on the boot disk, it is understandable you need a (number of) dedicated disk(s) for video editing, especially with the bandwidths required when the clip duration is short and the number of tracks exceeds one and uses a codec more complex than DV. The kind of files used during editing are, in order of their need for speed:
Media cache & Media cache database files, created on importing media into a project. They contain indexed, conformed audio and peak files for waveform display.
Typically small files, but lots of them, so in the end they still occupy lots of disk space.
Preview (rendered) files, created when the time-line is rendered for preview purposes, the red bar turned to green. Read all the time when previewing the time-line.
Project files, including project auto-save files, that are constantly being read and saved as auto-save files and written when saving your edits.
Media files, the original video material ingested from tape or card based cameras. Typically long files, only used for reading, since PR is a non-destructive editor.
Export files, created when the time-line is exported to its final delivery format. These files are typically only written once and often vary in size from several hundred KB to tens of GB.
When you are doubting which category of files to put on which kind of disk, especially when using both SSD's and HDD's, keep in mind that the speed advantage of SSD's over HDD's is most noteworthy with the Media cache & Media cache database. These files are frequently accessed, are small and there are many, so reducing latency and seek times and increasing transfer rates pays off by putting these on a SSD, rather than on a HDD, even if it is a raid0. Export files can go to the slowest volume on your system, since you only export once. To help you decide, I have added priority rank-numbers for speed, with 1 for the fastest volume and 5 for the least speed-demanding category.
and
Well, in the benchmark tests we have not seen any noticeable difference between SSD and HDD in terms of performance, but logic dictates that there should be a small difference in performance when the volume used for media cache is a SSD, because of the much faster access time and lower latency compared to a conventional disk. If it is noticeable, it is specifically on this volume with the media cache and media cache database, due to the large amount of small files that need to be accessed and written. This argument does not apply to the media volume with a limited number of files, that are very big in size.

Problems with screen resolution after connecting to HDTV with HDMI

Hope that somebody can help with this.
For a while I was connecting my iMac to my HDTV with a HDMI cable and a Mini Displayport Adaptor and had no problems.
The other day when I decided to put the sound through the TV (it was a quiet recording) and switched off the mirror mode my screen on the iMac went very strange.
The left of the screen was very skewed with strange colours and the actual wallpaper and icons was only on the right-hand side of the screen (I couldn't see the time, some icons, etc). The mouse pointer wouldn't go onto the left-hand side of the screen.
I have updated the software and when I now restart it - the resolution is incorrect and I cannot see the entire screen without scrolling across (although the strange stuff on the left-hand side isn't there). Whenever I now connect to the HDTV (using mirror screen) I get the same problem again.
Any help would be appreciated as I am fairly new to Macs.

Do you mean the screen looks like it's zoomed in ? If so then double-tap with three fingers to zoom out, and then make sure that Settings > General > Accessibility > Zoom is switched 'off'

Toshiba 22L1334G problems with HDMI

First of all, thanks everyone for trying to help me :)
Now let's get to the problem: i bought this Tv-Monitor yesterday and i've immediatly connected it to my PC (Video Card AMD R9 270X) with HDMI cable (The cable is rev. 1.4 and less then 1.5m).
The overall definition is very good, but i actually have 2 problems:
first, the colors are really saturated and i can't get them natural even setting the Video Card Values.
Second, the text with little font if it isn't black is very blurred and pixeled, very difficoult to read.
Searching o Google i found similiar problems for lot's of people, but they resolved the problems simply setting the HDMI as PC input.
Unfortunately they were using Samsung's or LG's displays and in my Toshiba one there isn't the setting to set the HDMI as PC signal.
What can i do to use this TV as monitor in a good way?

Hi
First of all I have to say that this Toshiba 22L1334G device isnt an PC monitor but its an TV which can be connected to the computer using the available RGB (VGA) port.
So in case you want to connect an computer to this TV and want to use it as an external monitor, you should use the available VGA port
I have to say that I had the same problems in the past with the blurred fonts using the HDMI port.
I connected had an monitor/TV combo device and connected my notebook to an external monitors HDMI port.
The blurred fonts were really a pain using office applications But I found a solution; my device supported an additional DVI port and I could connect my notebook to monitor using HDMI-to-DVI cable.
My other monitor supports from another manufacturer supports additional settings to change the font sharpness so I can use the HDMI port.

No HDMI sound to my TV with my g6 notebook with HDMI Codec drivers installed.

No HDMI sound to my TV with my g6 notebook with HDMI Codec drivers installed using Windows 7.

Having the same issues, any help would be appreciated.

Help with DYNEX Model: DX-55L150A11 - 55" 120Hz LCD Television

Is there a Software Update available for this television?? I have trouble when I switch channels on the Cable box (TWC set top box). The sound disappears and the only way I can get it back is to cycle through the HDMI ports on the Dynex remote or turn off/on the Dynex remote. Seems like the Dynex TV loses sync for the AUDIO and it only "RESYNCS" when the HDMI ports are cycled. I cycle through the HDMI ports, because that is the method of connection between the Cable Set-top box and the TV.
Also, the 120 Hz operation is blurry during a football game. I need to shut off the 120 Hz processing and watch the raw video and it is not blurry. WHY???
Overall, the TV is operating okay, just wondering if a Software Update would help this TV????

There is currently no software update available for your TV. However, your sound problem is caused by a communication issue between your cable box & TV via the HDMI cable. An easy test is to plug in another source (like a DVD or game consol) to the same HDMI input, with the same cable, problem goes away, it's the cable box / provider issue. The TV does not know what is plugged in, it's just processing the information it receives. TWC boxes (likely Scientific American or Motorola built) have many problems with HDMI communication. The quickest, easiest, cheapest solution as suggested by cmartin is to switch to component cables. Your TV can process full resolution HD through the component inputs eliminating the troublesome HDMI communication line. Cmartin's other issue sounds like an overloaded cable system and his provider should be running additional lines if useage is overwhelming the bandwidth. HDMI has been troublesome since it's creation and with more products coming out of different countries with no communication standard, everything is 'talking a different language' and compounding the problem.
Regarding your 120hz question, using this function without a true 120hz (frames per second) input signal (currently only used by 3D primarily, and a few select BluRay and video games), the TV's processor takes available incoming frames and averages them together to create additional 'false frames' which are added in between (frame 1-2-3 becomes 1-1.5-2-2.5-3-3.5, etc.) often causing a choppy or blurring effect with normal video conditions. It's purpose and only real current benefit is under very fast moving video conditions when the gap between frames may be more evident.
-Agent M
www.facebook.com/geeksquadrecon
www.twitter.com/geeksquadrecon

Black display macbook pro with HDMI connection

Hi I connected my macbook pro 15" to a samsung 24" display with HDMI moshi adapter.
Sometimes both display (samsung and MB) became black and I can't turn it on even if I disconnect my adapter. The only way is to turn off the macbook pro .
Here it's my problem log.
Thanks for your help!
biddusa
Interval Since Last Panic Report: 224269 sec
Panics Since Last Report: 1
Anonymous UUID: 8807EFA6-CBF8-49E3-BF8D-E807A011DBCF
Wed Mar 30 22:52:10 2011
panic(cpu 1 caller 0x9cdc8f): NVRM[0/1:0:0]: Read Error 0x00610020: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0x7f635000 0x0a5480a2, D0, P2/4
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x9383bb28 : 0x21b510 (0x5d9514 0x9383bb5c 0x223978 0x0)
0x9383bb78 : 0x9cdc8f (0xbe323c 0xc53840 0xbf23cc 0x0)
0x9383bc18 : 0xae85d3 (0x985fc04 0x9407004 0x610020 0xf129b)
0x9383bc68 : 0x161cbcc (0x9407004 0x610020 0x9383bc98 0x0)
0x9383bcb8 : 0x162a8c3 (0x9407004 0x9968004 0x0 0x9bd76c)
0x9383bce8 : 0x16ecd48 (0x9407004 0x9968004 0x0 0x1)
0x9383be28 : 0xb07250 (0x9407004 0x9731004 0x0 0x0)
0x9383be68 : 0x9d6e23 (0x9407004 0x9731004 0x0 0x0)
0x9383bf08 : 0x55125b (0x0 0x9a15600 0x1 0x29f562)
0x9383bf58 : 0x55028c (0x9a15600 0xacd6d20 0x8d28044 0x99a1b7c)
0x9383bf88 : 0x5506e6 (0x8e53300 0x0 0xffffffff 0x5515e000)
0x9383bfc8 : 0x2a06dc (0x8e53300 0x0 0x10 0x936fd84)
Kernel Extensions in backtrace (with dependencies):
com.apple.nvidia.nv50hal(6.2.6)@0x15b6000->0x19cafff
dependency: com.apple.NVDAResman(6.2.6)@0x967000
com.apple.NVDAResman(6.2.6)@0x967000->0xc54fff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x927000
dependency: com.apple.iokit.IONDRVSupport(2.2)@0x95a000
dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x938000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10J869
Kernel version:
Darwin Kernel Version 10.7.0: Sat Jan 29 15:17:16 PST 2011; root:xnu-1504.9.37~1/RELEASE_I386
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 16641940416018
unloaded kexts:
com.apple.driver.AppleUSBTCKeyEventDriver 200.3.2 (addr 0x14c6000, size 0x8192) - last unloaded 5261173439466
loaded kexts:
com.vmware.kext.vmnet 3.1.2
com.vmware.kext.vmioplug 3.1.2
com.vmware.kext.vmci 3.1.2
com.vmware.kext.vmx86 3.1.2
com.apple.driver.AppleBluetoothMultitouch 54 - last loaded 5187881834571
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AGPM 100.12.19
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleHDA 1.9.9f12
com.apple.driver.AppleMikeyDriver 1.9.9f12
com.apple.driver.AudioAUUC 1.54
com.apple.driver.AppleUpstreamUserClient 3.5.4
com.apple.driver.AppleMCCSControl 1.0.17
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.kext.AppleSMCLMU 1.5.0d3
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.iokit.CHUDUtils 364
com.apple.iokit.CHUDProf 366
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.ACPISMCPlatformPlugin 4.5.0d5
com.apple.driver.AppleLPC 1.4.12
com.apple.GeForce 6.2.6
com.apple.driver.AppleGraphicsControl 2.8.68
com.apple.driver.AppleIntelHDGraphics 6.2.6
com.apple.driver.AppleIntelHDGraphicsFB 6.2.6
com.apple.driver.AppleUSBTCButtons 200.3.2
com.apple.driver.AppleUSBCardReader 2.5.8
com.apple.driver.AppleIRController 303.8
com.apple.driver.AppleUSBTCKeyboard 200.3.2
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.SCSITaskUserClient 2.6.5
com.apple.iokit.IOAHCIBlockStorage 1.6.3
com.apple.iokit.AppleBCM5701Ethernet 2.3.9b6
com.apple.driver.AppleUSBHub 4.1.7
com.apple.driver.AppleFWOHCI 4.7.1
com.apple.driver.AirPortBrcm43224 427.36.9
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleUSBEHCI 4.1.8
com.apple.driver.AppleAHCIPort 2.1.5
com.apple.driver.AppleACPIButtons 1.3.5
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.6
com.apple.driver.AppleACPIEC 1.3.5
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 105.13.0
com.apple.driver.AppleMultitouchDriver 207.10
com.apple.driver.AppleBluetoothHIDKeyboard 141
com.apple.driver.IOBluetoothHIDDriver 2.4.0f1
com.apple.driver.AppleHIDKeyboard 141
com.apple.driver.DspFuncLib 1.9.9f12
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.AppleSMBusController 1.0.8d0
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.0f1
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.CHUDKernLib 365
com.apple.iokit.IOAudioFamily 1.8.0fc1
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.9.9f12
com.apple.iokit.IOHDAFamily 1.9.9f12
com.apple.iokit.AppleProfileFamily 41.4
com.apple.driver.AppleSMC 3.1.0d3
com.apple.driver.IOPlatformPluginFamily 4.5.0d5
com.apple.driver.AppleSMBusPCI 1.0.8d0
com.apple.nvidia.nv50hal 6.2.6
com.apple.NVDAResman 6.2.6
com.apple.iokit.IONDRVSupport 2.2
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.0f1
com.apple.driver.AppleUSBBluetoothHCIController 2.4.0f1
com.apple.iokit.IOBluetoothFamily 2.4.0f1
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.5
com.apple.iokit.IOUSBMassStorageClass 2.6.5
com.apple.driver.AppleUSBMultitouch 206.6
com.apple.iokit.IOUSBHIDDriver 4.1.5
com.apple.driver.AppleUSBMergeNub 4.1.8
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.5
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
com.apple.iokit.IOUSBUserClient 4.1.5
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IO80211Family 314.1.1
com.apple.iokit.IONetworkingFamily 1.10
com.apple.iokit.IOUSBFamily 4.1.8
com.apple.iokit.IOAHCIFamily 2.0.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.5
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.2
com.apple.driver.AppleACPIPlatform 1.3.5
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f16
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.36.9)
Bluetooth: Version 2.4.0f1, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: Hitachi HTS545050B9SA02, 465,76 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000
USB Device: iPhone, 0x05ac (Apple Inc.), 0x1292, 0xfa140000
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa130000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0237, 0xfa120000
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000

This is a new report: Any suggestions? thanks
Interval Since Last Panic Report: 401131 sec
Panics Since Last Report: 5
Anonymous UUID: 8807EFA6-CBF8-49E3-BF8D-E807A011DBCF
Mon Apr 4 01:08:48 2011
panic(cpu 0 caller 0x5bb74c8f): NVRM[0/1:0:0]: Read Error 0x00610020: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0x7eee9000 0x0a5480a2, D0, P2/4
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x7e9f3b28 : 0x21b510 (0x5d9514 0x7e9f3b5c 0x223978 0x0)
0x7e9f3b78 : 0x5bb74c8f (0x5bd8a23c 0x5bdfa840 0x5bd993cc 0x0)
0x7e9f3c18 : 0x5bc8f5d3 (0x94a5804 0x736c004 0x610020 0x5bc87b6e)
0x7e9f3c68 : 0x5c2d9a69 (0x736c004 0x610020 0x0 0x0)
0x7e9f3cb8 : 0x5c2e78c3 (0x736c004 0x957c004 0x0 0x5bb6476c)
0x7e9f3ce8 : 0x5c3a9d48 (0x736c004 0x957c004 0x0 0x1)
0x7e9f3e28 : 0x5bcae250 (0x736c004 0x7541004 0x0 0x0)
0x7e9f3e68 : 0x5bb7de23 (0x736c004 0x7541004 0x0 0x0)
0x7e9f3f08 : 0x55125b (0x0 0x95db280 0x1 0x29f562)
0x7e9f3f58 : 0x55028c (0x95db280 0x863ea0 0x0 0x2a358d)
0x7e9f3f88 : 0x5506e6 (0x7e71a80 0x9f85000 0xffe00870 0x7fff)
0x7e9f3fc8 : 0x2a06dc (0x7e71a80 0x0 0x10 0x9da69a4)
Kernel Extensions in backtrace (with dependencies):
com.apple.nvidia.nv50hal(6.2.6)@0x5c273000->0x5c687fff
dependency: com.apple.NVDAResman(6.2.6)@0x5bb0e000
com.apple.NVDAResman(6.2.6)@0x5bb0e000->0x5bdfbfff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x535d6000
dependency: com.apple.iokit.IONDRVSupport(2.2)@0x5ae4d000
dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x5aeff000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10J869
Kernel version:
Darwin Kernel Version 10.7.0: Sat Jan 29 15:17:16 PST 2011; root:xnu-1504.9.37~1/RELEASE_I386
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 56398235701223
unloaded kexts:
com.apple.driver.AppleUSBUHCI 4.1.5 (addr 0x5a472000, size 0x65536) - last unloaded 233729278709
loaded kexts:
com.vmware.kext.vmnet 3.1.2
com.vmware.kext.vmioplug 3.1.2
com.vmware.kext.vmci 3.1.2
com.vmware.kext.vmx86 3.1.2
com.apple.filesystems.udf 2.1.1 - last loaded 4375692541453
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AGPM 100.12.19
com.apple.driver.AudioAUUC 1.54
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.iokit.CHUDUtils 364
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.iokit.CHUDProf 366
com.apple.driver.AppleMikeyDriver 1.9.9f12
com.apple.driver.AppleUpstreamUserClient 3.5.4
com.apple.driver.AppleIntelHDGraphics 6.2.6
com.apple.driver.AppleHDA 1.9.9f12
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.AppleMCCSControl 1.0.17
com.apple.driver.AppleBluetoothMultitouch 54
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.iokit.AppleBCM5701Ethernet 2.3.9b6
com.apple.kext.AppleSMCLMU 1.5.0d3
com.apple.driver.AppleGraphicsControl 2.8.68
com.apple.GeForce 6.2.6
com.apple.driver.AirPortBrcm43224 427.36.9
com.apple.driver.ACPISMCPlatformPlugin 4.5.0d5
com.apple.driver.AppleLPC 1.4.12
com.apple.driver.AppleIntelHDGraphicsFB 6.2.6
com.apple.driver.AppleUSBTCButtons 200.3.2
com.apple.driver.AppleUSBTCKeyboard 200.3.2
com.apple.driver.AppleUSBCardReader 2.5.8
com.apple.driver.AppleIRController 303.8
com.apple.iokit.SCSITaskUserClient 2.6.5
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleUSBHub 4.1.7
com.apple.iokit.IOAHCIBlockStorage 1.6.3
com.apple.driver.AppleFWOHCI 4.7.1
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleUSBEHCI 4.1.8
com.apple.driver.AppleAHCIPort 2.1.5
com.apple.driver.AppleACPIButtons 1.3.5
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.6
com.apple.driver.AppleACPIEC 1.3.5
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 105.13.0
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.0f1
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.CHUDKernLib 365
com.apple.driver.AppleSMBusController 1.0.8d0
com.apple.driver.DspFuncLib 1.9.9f12
com.apple.iokit.IOAudioFamily 1.8.0fc1
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleBluetoothHIDKeyboard 141
com.apple.driver.AppleHIDKeyboard 141
com.apple.driver.IOBluetoothHIDDriver 2.4.0f1
com.apple.driver.AppleMultitouchDriver 207.10
com.apple.driver.AppleSMBusPCI 1.0.8d0
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.AppleProfileFamily 41.4
com.apple.driver.AppleHDAController 1.9.9f12
com.apple.iokit.IOHDAFamily 1.9.9f12
com.apple.iokit.IO80211Family 314.1.1
com.apple.iokit.IONetworkingFamily 1.10
com.apple.driver.AppleSMC 3.1.0d3
com.apple.driver.IOPlatformPluginFamily 4.5.0d5
com.apple.nvidia.nv50hal 6.2.6
com.apple.NVDAResman 6.2.6
com.apple.iokit.IONDRVSupport 2.2
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.0f1
com.apple.driver.AppleUSBBluetoothHCIController 2.4.0f1
com.apple.iokit.IOBluetoothFamily 2.4.0f1
com.apple.driver.AppleUSBMultitouch 206.6
com.apple.iokit.IOUSBMassStorageClass 2.6.5
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.5
com.apple.iokit.IOUSBHIDDriver 4.1.5
com.apple.driver.AppleUSBMergeNub 4.1.8
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.5
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
com.apple.iokit.IOUSBUserClient 4.1.5
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOUSBFamily 4.1.8
com.apple.iokit.IOAHCIFamily 2.0.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.5
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 6
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.2
com.apple.driver.AppleACPIPlatform 1.3.5
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0

HP 2311xi Monitor not working with HDMI? - Windows 8

I have my RCA 6ft HDMI cable plugged into the back of my computer, and running to the back of my monitor. I can see my background, and the bottom tab showing files, internet, etc. But nothing else. No time, sound, or date in the bottom right corner, and all my programs are missing. I have to switch back to DVI for everything to work. I am confused how I get connection with HDMI, but my programs are missing? - Please Help

I understand things aren't quite working as expected with HDMI and the 2311xi monitor.
Is the monitor being connected to a notebook or a desktop PC?
What model is the PC?
If it is an HP PC, what is the product number?
As far as sound goes, have you verified in the sound manager that the HDMI port is selected as the sound output? Sound may still be defaulted to the analog sound output similar to when DVI is used.
Go to Start, search for Sound and open the result under Control Panel.
Verify that HDMI is selected.
if HDMI, or the monitor is not listed, then let me know what options are available. You may need to right-click and select show hidden/disabled devices.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Help with hdmi

Similar Messages

Maybe you are looking for