Help with how to set application access on nokia e...

Please i tried using my e71 to dowqnload files but could not,i tried setting the access but couldnt

If what you mean is setting the access Points.. are you trying manual settings ? Best way is to request the Operator to send the settings. These will be sent thru' SMS. Open and select SAVE..and you are done..

Similar Messages

How to set application access type for list of users

Hi everybody,
I've an requirement to automise the application access type setting in shared services.
When i searhed to do with MaxL scripts.I'm able to set the application access type for a single user using
alter user 'username' add application access type essbase
alter user 'username' add application access type planning
But,i've to perform this as a daily activity updating for list of users.Is there away to do it..??..i want to pass the list of users to the above alter user command.??
Please help me.
Cheers
Saran
Edited by: user11396937 on Aug 27, 2010 2:09 AM

I discovered that changing "Image interpolation" optioon in general preferences of Photoshop has direct influence on smart object interpolation type. You can even reinterpolate smart object after changing image interpolation in preference. Just click ctrl + t and enter.

HT1353 can you help me how to install applications on my ipod ma623c

can you help me how to install applications on my ipod ma623c

You have the origina, 1G iPod. those can m;y go as high as iOS 3.1.3
Connect the iPod to your computer and update via iTunes as far as your iPod model allows
iOS: How to update your iPhone, iPad, or iPod touch
A 1G iPod can go to iOS 2.2 via iTunes and iOS 3.1.3 via
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
https://buy.itunes.apple.com/WebObjects/MZFinance.woa/wa/touchLegacyLandingPage
However, there are not that many apps compatible with 3.1.3. To find those more easily:
iOSSearch - search the iTunes store for compatible apps.
Vintapps 3.1.3 - paid app.
Apple Club - filter apps by iOS version.

TS2755 Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help of how to set up messages on each

Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help on how to set up messages on each device separately and to start using messages app on each device independently. Thanks

search google for "iphone remove picture from contact"

Need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook.......

need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook? removal of cmos, resetting laptop, using cccleaner, windows password recovery and hiren's was noneffective, any help is appreciated. thanks

Hi,
As your notebook is a business class machine, security is more stringent - the password is stored in non-volatile memory and there are no 'backdoor' passwords. Your best option would be to contact HP regarding this.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Please help: Example how to peploy application from jar file step by step

Please help: Example how to peploy application from jar file step by step.
All help appreciated
Mike

Thanks I will try these links
Mike
"Slava Imeshev" <[email protected]> wrote:
Hi Mike,
These links could be useful:
http://e-docs.bea.com/wls/docs61////adminguide/appman.html
http://e-docs.bea.com/wls/docs61////quickstart/quick_start.html
http://e-docs.bea.com/wls/docs61//////ConsoleHelp/application.html
http://e-docs.bea.com/wls/docs61///programming/environment.html
Regards,
Slava Imeshev
"Mike" <[email protected]> wrote in message
news:3ca0e94c$[email protected]..
Please help: Example how to peploy application from jar file step bystep.
All help appreciated
Mike

I have an itouch, most songs i got off my cd's. i have a new laptop and want to put songs from itouch to laptop.I can only get the songs that i purchased onto the laptop? need help with how to get the rest from itouch to laptop please??

i have an itouch, most songs i got off my cd's. i have a new laptop and want to put songs from itouch to laptop.I can only get the songs that i purchased onto the laptop? need help with how to get the rest of the songs (from my cd's) from itouch to laptop please??

See this previous discussion:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

How to set group contacts in nokia asha 305

how to set group contacts in nokia asha 305....thank u......

Can Some one Tell same group contact creation for ASHA 308 too?

How to set Application Parameters in web dynpro application

Hello everyone,
I have a requirement where I need to set a table as a scrollable table , as i go through this link
[http://help.sap.com/saphelp_nw04s/helpdata/EN/b5/ac884118aa1709e10000000a155106/content.htm]
I found that there is a application parameter WDTABLENAVIGATION which needs to be set to SCROLLBAR
I checked on every bit in nwds for the DC where I can set this parameter but could nt find it .
Can anyone please help me out in finding this and making my table scrollable.
regards,
Raj

Thanks for the response arindam,
Do you have any idea how to set value , i tried with some values and it has been ending up in errors.
Kindly help me out ..
Regards,
Raj

Error: Object variable or with variable not set while accessing BPC Excel

Hi,
I am working on BPC NW 7.5. When I am trying to access BPC for Excel I am getting the below error.
'object variable or with variable not set'
When I click on BPC for Excel it ask for the credentials, after entering it we encounter this error.
Any idea why is this happening?
Regards,
Priyanka Singh

Hi Renne,
Could you share me the solution to resolve the issue?
I am getting an error "object variable or with block variable not set" while trying to submit data through an Input schedule.
I am working on SAP BPC 7.0 NW and using MS Excel 2003.
I can log in to BPC Admin and excel with my user id and password.
Only when i am trying to click esubmit --> send and refresh schedules i am getting this error.
I checked my security profile and i have the submit data task in my task profile.
Following couple existing SDN postings i tried to check the ADD-INs of the excel on my system. However it looks like the steps listed in the existing SDN posts are for MS EXCEL 2007.
Please suggest me how do i resolve this issue. Please note I am working on SAP BPC 7.0 NW and using MS Excel 2003.
Regards,
Jagat

Error: Object variable or with variable not set while accessing

Hi Friends,
I am facing 'object variable or with variable not set' Error while opening BPC Excel.
I have done, In Excel 2007, go to Excel Option -> Add-Ins -> Manage: COM Add-ins and Go...
You look "BPC COM" disable and need enable again.
But I am getting same Error message again and again. Please help me...
I did BPC uninstall & install but still error massage poping
Thank you in Advance

Hi Kumar,
I doubt if you are following the below steps. Please confirm. Thanks
1. Open your normal Excel.
2. Check for Planning and Consolidation tab on the top ribbon.
3. I assume this wouldn't be available for you.
4. If this is not present, open the Excel Options
5. Click on Add-Ins and check the Active Application Add-ins
6. Is Planning and consolidation present in it?
7. If not, select "Disabled Add-ins" in the drop down below besides "Manage".
8. Click "GO"
9. Select the Planning and Consolidation add-in from disabled add-ins and "Enable" it.
10. Check once again if this add-in is prersent in "Active" add-ins .
11. Now close and re-open excel
12. The Tab should be present now (Planning and Consolidation)
Regards,
Sanjeev

Help with port forwarding to application

Help needed to Port Forward on to my PS3.
I need to forward the following ports:
UDP: 3074; 3659; 6000
TCP: 80; 443; 3659; 10000 - 10099; 42127
Have previously given the PS3 a static IP, set the port forwarding rules and then forwarded to the IP address, but it appears the ports have not opened as expected.
Help Keith

I can only see one image which just shows the application mapping, but no indication as to whether you had clicked the "apply" button.
Why are you forwarding ports 80 and 443, are you running a webserver on the PS3, as those ports are used for web serving.
As a matter of interest, your port 80 is showing as open at the moment, so is the PS3 turned on, or is port 80 mapped to something else instead?
What I would like you to do is to start from the beginning, with just the single TCP port number 3659 assigned to the PS3.
It will mean removing the other assignments, but it will make things a bit easier.
If you could do that please, and then we can do some tests.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Can someone help with my video setting?

I have a bunch of small, heavily compressed AVI clips that I want to edit together. But I can't figure out how to export it with the best quality. The dimensions are 640x480, but those dimensions are always different on the exported video- I'm so confused. Here is the data of my video, if someone can help me find the settings that will keep my videos at the same or almost the same quality I would be so grateful!

Hi,
This link takes you to some info about your file ( pasted below )..and from this link you can probably also find more info as it applies to your needs...maybe.....
Also, Bill Hunt's suggestion and questions seem important ...you could give more info about what you are doing and using ( version premiere) etc etc
Rod
Good Luck
http://www.modthesims.info/archive/index.php/t-236047.html
prez28
17th Jun 2007, 08:08 AM
Hello!! Hopefully I am posting in the proper section. If not, I will be glad to repost in the proper area. I am hoping that a fellow ModtheSims2 member who has experimented with movie making in the sims 2 and Adobe Premiere Pro 2.0 could answer my question: I have been toying around with movie-making in the game
I film (or capture)the video clips (or shall I say computer game animations)using the game's best option of a resolution of 640 x 480 at 30 fps with audio at 11025hz 16-Bit mono (compressed). As you are surely aware the game saves the file into AVI format with the VP61 codec. When I open and view the AVI files using Microsoft Windows Media Player, the image is beautiful and crystal clear!!
If I import the AVI file into Windows Movie Maker 2.0, same thing, the image is beautiful and crystal clear!! But here is the problem, when I import the same AVI file into Adobe Premiere Pro 2.0, and play the file into the source window, the video is heavily pixelated, in fact very large square pixels...It almost appears like a mossiac over the entire video. I tried turning the frame blending off in Adobe Premiere under 'clip' and then 'video options' but that does not appear to help. All the latest drivers for everything on my PC have been installed. Here are my specs Windows Media Center Edition 2005
P5W-DH Deluxe ASUS motherboard
Intel Dual Core 2.4ghz processor
2 XFX NVidia 7950GT graphic's card (512mb)
4GB Ram (although windows xp only uses about 2.5 to 3ghz of it)
1 200gb hard drive
1 500gb hard drive
Audigy 2 Platinum zs sound card Maybe Adobe does not support the VP61 codec, but I have not been able to confirm this anywhere. However I did find an article from the Adobe website about two machinima artists that use Adobe Premiere to make 'Sims 2' videos.
Here is the link to that article: http://www.adobe.com/motion/roosterteeth.html When I record using the game's top setting of 640 x 480 30fps, I am playing the game on a 20" widecreen LCD monitor with the resolution set at 1024 x 768. Might this be the problem? I found a 'cheat' on the internet to change the game's settings in the game's config. file so that it would capture the animations at 1024 x 768, like the resolution for my PC monitor. But once played in Adobe Premiere Pro 2.0, the clips still have the large square pixel problem... Its like big white and blue squares all over the image... But Maybe since I am using a widescreen monitor I must capture and edit in a true widecreen format like 1280x720 or above??? I dont know. I just find it weird that the AVI files play fine with Windows Movie Maker and Windows Media Player but not with Adobe Premiere Pro 2.0 Being the amature I am with Adobe, maybe I am doing something wrong. But I did search all the forums and cannot seem to find any info to fix the problem... Maybe I must convert the AVI files before importing them into Adobe, but if it could be avoided that would be cool ... so if you have any info that could help me it would be much appreciated!! Cheers!
Prez28
Sims 2 movie-maker and Adobe-Beginner
whiterider
17th Jun 2007, 11:45 AM
I'm afraid I haven't used Adobe Premiere, but have you checked on their site and support forums? I've used TS2 video clips in other movie editing programs in the past, so the format does work - it certainly sounds like Adobe is having issues there. Have you tried different codecs? You may also want to go have a look at sims99.com, a TS2 machinima site, which may have more info.
prez28
17th Jun 2007, 10:13 PM
Thank-you for your reply - I did post this question at the sites you mentionned and suprisingly received many responses from the Adobe Premiere Pro 2.0 support forums It would appear the Adobe Premiere Pro 2.0 does not like compressed AVI files and it would also appear that Adobe does not like the VP61 codec that the Sims 2 game uses to compress the movie file (AVI). When I capture the Sims 2 movies by setting the options to 'Large' (640 x 480) and 'High' (30fps) - then the clips will not play properly in Adobe Premiere Pro 2.0 But when I capture the Sims 2 movies by setting the options to 'Large' (640 x 480) and 'High, uncompressed' (30fps) - then the clips play properly in Adobe Premiere Pro 2.0 I thought I had tested this originally, but that it was not making a difference. But I must of messed up, because as I say, if I film compressed, the clips have the pixelation problems in Adobe. If I film uncompressed there is no problems with the clips in Adobe. The only downside is that uncompressed clips are very large. (Like 1.5GB for 60 second clip) Cheers!

How to set 'colliding' access restrictions in wrt610n - what are rule preferences?

Hello. I want to set up access restrictions to one MAC address (my kid's machine) basing on week days. From Su to Th allow less access time while during Fr-Sa afternoons access time should be longer. The question is how to program it in router. I know I can set rules with "allow" and "disable" keyword, but I don't know rules preference.
When I set (Su-Th 6-21) allowed access time then router automatically denies defined machine internet access outside this time range. The problem is in the power of thus calculated denying time. I want to allow more access time in weekend, so I hoped if I can simply add "Fr-Sa 6-22:30 allowed access time" rule. I hoped that router will regard explicitly set time over inexplicitly set time but it appears it is not so.
Does anyone know the rule of rules? What are their preferences/priorieties, iis it possible to stack more rules affecting one MAC address or it is so simple that the first rule "rulez"? Is it possible to set more than one time rule affecting the one machine?
Solved!
Go to Solution.

Agh! Thanks for your reply, it was good incentive to test the problem little more. Now I'm pretty sure that wrt610n algorithm has problem - it lies with power cuts. In my flat, the last internet user usually turns off power board when goes to sleep. After power is resumed router seemed to work flawlessly yet herein lies the problem and I hope I've found solution.
The tests I have done:
1. 2 rules (as mentioned in my first post). Kid's machine works (this is day now). Didn't played with rules times. Just turned router off. When router was turned on, two other (parents) machine get internet access while kid's machine didn't! Kid's machine was banned from internet against the rules. Router has proper time set - I checked it's status.
2. I turned both rules to "disable access" versions (1. disable access Su-Th 21-23:55; 2. disable access Fr-Sa 22:30-23:55). This rules should work almost the same way (the only problem is, that no rule can expand over midnight, so the third rule should be added, banning access from midnigts to early mornings). The router was switched off. Then on. All three machines now has internet access. I hope, router will ban access in the afternoon automatically, as is set
My deduction. Algorithm bases on time points. When marked time comes, algorithm do, what it should do (but only, if router is powered). When you set "turn internet access on" time (this is "allow rule"), router turns on the access precisely at the chosen moment of time. If router was dead at that time, it doesn't turn the access on however, when power is restored. But when you set "disable rules" in place of "enable rules" I hope it should work and I tested, that this way router gives access after turning it on. Router should disable internet access to the kid's machine at selected time - at least until smart kid does not turn the router off a few seconds before the switch_off time and soon after turn it on But then there is plenty of more powerfull means of control, so I don't worry too much Yet it seems to me, there is a flaw in algorithm, which doesn't run properly after power on.

Help me how to set charset UTF-8 in SQL Server 2000

Hello guys,
Pls anyone help me out from "how to set the charset UTF-8" in SQL Server 2000.
How do i find the default charset in that?

SQL Server 2000 uses UCS-2/UTF-16 encoding.
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnsql2k/html/intlfeaturesinsqlserver2000.asp

Help with how to set application access on nokia e...

Similar Messages

Maybe you are looking for