Help with HP d145 on Windows PC. Specific error messages. iFelix help!
My HP is connected to a windows xp system on my home network. When I try to add it to the Mac (I have enabled windows sharing on the PC), it shows up. When I try generic printingw (no d145 driver), I get this message when I try to print "Connection failed with error NTSTATUS_NOMEMORY"
At the suggestion of a few people on the g5 board, I added the d145 driver Foomatic/HPIJS and specifically added it the printer list as the hpd145. However, now I get the following error
"Unable to connect to SAMBA host, will retry in 60 seconds...foomatic-rip version $Revision 3.43.2.9"
Can anyone help me out, Thanks in advance, Jim
Hello Krish_12,
This may be a result of security software interfering with the iCloud Control Panel's ability to communicate with our servers. The following article provides information that can help correct this.
iCloud: Ensuring iCloud will work with security software in Windows
http://support.apple.com/kb/TS4175
Cheers,
Allen
Similar Messages
-
i have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this
Try downloading the trial. It ought to detect that you have a 64-bit system.
You aren't using Vista, are you? PSE 13 requires at least win 7 and I think a few folks with vista have gotten a similar error message on trying to install it. -
iTunes 10.6.0.40 will not open on Windows 7, no error messages come up. Have tried un-installing it and re-installing it many times. Please help.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2 -
Windows Blue Screen Error Message Appears As Soon As IPod Connected
Everytime I connect my IPod to my computer, I get the Windows Blue Screen error message. Thought it was the cable, so plugged cable in by itself. No problem. Uninstalled IPod and ITunes software and then plugged in IPod, still got the Blue Screen. The Blue Screen says something about "recent plugged in device problem". It is not the cable, it must be the IPod. Did not have this problem when I bought it. Tried it on labtop and get the same error message. I can't do updater or anything that requires me to plug the IPod into a computer because the Blue Screen appears immediately. When I unplug, the Blue Screen remains and locks up the computer so I have to restart each time. I have tried everything I can think of. Please help.
Hi Mike thank you for replying,
I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
If you can help me out or suggest where to search it would be much appreciated.
Thx -
When I connect my iTouch to my PC (windows 7) an error message is displayed reading "iTunes was unable to load dataclass information from sync services. Reconnect or try again later". I have completely uninstalled and then reinstalled iTunes. I have also completely reset my iTouch to factory defaults. I have even followed all the advice provided previously to other forum member with the same problem. Nothing seems to work. Please help me someone.
I'm getting the same problem with both my IPad 4 and iPhone 5
Just started a few weeks back, Since then I have had two Itunes updates.
Is this something Apple is aware of and trying to fix? -
Dv6 Notebook "Black Screen" following "Windows Blue Screen" error message. Caps Lock blinking!
I have a HP DV6 notebook. I left my computer on overnight and the next morning I woke up to find a Windows Blue Screen error message. It said to restart my computer. I was in a rush so I just closed the lid. When I returned I opened the lid and the screen was black. I pressed the power button to restart it and I haven't been able to restart it since. I now have a power light, a black screen and the CAPS LOCK light is blinking twice then a pause! Please help!
Hi btgclark,
I understand that you are having an issue with turning on your notebook and the CAPS LOCK light blinks twice and then pauses. The following document 'Computer Does Not Start and the LEDs Blink or the Computer Beeps' will walk you through the steps that you need to follow. For your error code, it means that the BIOS has a corruption failure. This document will walk you through the necessary steps to get this resolved.
If for some reason this document does not resolve the issue please provide me with the model number to your notebook. I have included a document 'How Do I Find My Model Number or Product Number?'
Please let me know how this works out for you, thank you.
I worked on behalf of HP -
CM1312 NFP: WIndows 7: USB Error message ~"Lost Connection"
With the 1312 connected to my Windwos 7 desktop, periodically Windows gives an error message that indicates that it has lost connection to the printer. Unplugging and replugging the USB cable fixes the problem. Otherwise the print & scan functions work perfectly. Symptomatically it appears as if the printer goes to sleep and stops responding to whatever "keep alive" messages Windows might be sending. Is there a setting in the printer, in Windows or in the printer driver software that can prevent this message?
BTW, the other way to work around this problem is to just access the printer via the Ethernet but the scan funciton is not accessible via the network (an unfortunate limitation).aluniewski,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
I am trying to install the latest version of Itunes so I can Sync with IOS7 but I keep getting an error message saying it can't dis-install the old version Missing itunes64 files.
I tried to just un-install the old version but my computer tell me it can't because some files are missing. I don't know how to find them or how to fixx my problem. Can anyone help?
ThanksI keep getting an error message saying it can't dis-install the old version Missing itunes64 files.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
When re installing iTunes on window it shows error message: Service Apple mobil divice does not start
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
IQ525A - Two Windows Script Host Error messages, plus folders won't close
How do I get folders to close, when right clicking will not close them? I am running Trend Micro security and also have two Windows Script Host error messages appearing. I need to click OK to proceed each time I use IQ525A/
assume IQ is running in safe mode, as start menu and bar is white.Any suggestions
Thanks
KitcatCrash report:
https://crash-stats.mozilla.com/report/index/ab4ee242-57f1-4a84-baef-ca2202150308
Signature shutdownhang
Start your '''Computer''' in safe mode with networking. Then start Firefox. Try '''Safe''' web sites.
'''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Starting The Computer In Safe Mode;<br>Free Online Encyclopedia]'''
Wait a few minutes (don't go anywhere), then close it.
Is the problem still there? -
I am not able to reply to any email in my Outlook Inbox. It doesn't matter if it's a new email or one I've already opened. I get no specific error message, just "Sorry looks like there was an error. Please try again."
Boot from the Leopard DVD (I assume you are installing Leopard since you've posted in the Leopard forum.) After the installer loads select your language and click on the Continue button. After the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the left side list then click on the Partition tab. Select one partition from the drop down Partition menu, set the format type to Mac OS X Extended (Journaled) from the Format drop down menu. Click on the Options button and be sure the partition map is set to GUID (GPT) then click on the OK button. Click on the Partition button. After the partitioning has been completed quit DU and return to the installer. Proceed with installing OS X.
If you choose to install Tiger follow the same procedure as above except boot from the OS X Installer Disc One that came with the computer (assuming that is Tiger.) -
Job to delete specific Error Messages
Experts,
We are facing the need to create a job which deletes specific error messages (specific sender service and interface combination, plus specific error category). Which are the best options to achieve this?
I guess this can be done in the Deletion Procedure but in the Threads I found there wasn't a detailed description. It there any documentation for that?
Your input is appreciated.
Cheers,
MathiasThanks for this link.
I am afraid the standard function does not offer what we are looking for.
To put this into an example:
A message from Sender Service A and Sender Interface B fails in the message processing with a specific error category e.g. MAPPING I EXCEPTION_DURING_EXECUTE
This error is classified as a known error and should be deleted from the Database (Monitoring Screen).
Can this be achieved without an ABAP development? -
Windows Vista: Ipod Error Message, no longer read by PCs
Hello,
I have a 5th generation black ipod video with 30GB of memory.
The other day I hooked it up to my laptop (Toshiba, 4 months old) that it's been functioning on with no problems whatsoever. This weird error message flashed twice about it not being able to sync because of some software problem.
Eversince then, the only thing I can charge my ipod on is the family treadmill in the basement (~_~) as no other computer in the house recognizes it. I can't even charge it through the wall sockets, either.
I have changed the ipod cord, still no luck. I've also reset the device about 3 or 4 times and uninstalled, restarted the laptop then reinstalled itunes. I would like to reset it back to factory settings but that's impossible as computers/laptops don't pick it up. I live very far from a Mac store...
What's a girl to do? I can't live without my Busta Rhymes and Wu-Tang Clan!
Any advice would be greatly appreciated! Thanks!you have to update Vista go to this site and up-date http://windowsupdate.microsoft.com
-
iPad 3 and iPhone 4S won't synch with iTunes on Mac book pro. Error message says I need to have version 10.6.3 or later for iTunes. Mac iOS version 10.5.8 and iTunes on Mac is 10.6.1. iPad and iPhone version is 6.0(10A403). When I check for updates on the Mac book pro it says software versions are up to date.
When I check for iTunes version 10.6.3 it looks like it is for snow leopard operating system which I am not on. How to I get my devices to sync with computer. Everything worked prior to iOS 6 upgrade on remote devices.I'm having the same problem.
iPhone 4s won't sync with my Macbook Pro.
I iust updated the iPhone to iOS6 (thought it wasn't syncing before the update either).
Macbook Pro running Mac OS 10.5.8
iTunes 10.6.3 (i.e. latest update - which hasn't had an issues apart from syncing).
I tried 3 different USB sync cables. Still not syncing.
Do I really have to update my Mac OS to 10.6.8 in order to sync my phone ? I thought as long as you have iTunes 10.6.3 you're ok...
Is there a way to update to Mac OS 10.6.8 (or later) without wiping the hard drive and doing a new install?..
thanks -
How do you download i-tunes onto Windows XP when error message occurs, 'This application pack could not be opened. Verify that hte package exists and that you can access it, or contact the application vendor to verify that this is a valid window installation package'.
I wish I knew because i'm having the same problem. As soon as I find the answer I will post.
Maybe you are looking for
-
Hey, Can anyone tell me where can I find a PDF guide or manual for Numbers?
-
Cannot remove attributes in HTMLDocument
With a JTextPane, HTMLDocument and two JButtons I can select a piece of text and format it (bold for example). Then I want to select it again and clear the format (non bold for example). I do this with the code below. The editor shows the text correc
-
Lightroom 5 won't transfer video metadata.
Moving from Lightroom 4 to 5, and none of the metadata from my video files will transfer. Is there any hope? I'm hoping there's something simple I'm missing. Otherwise it's a bit of a show stopper for me.
-
Again, everything worked perfectly until about two days ago. Out of nowhere, the numbers on the unlock screen stopped working. The sliders still work, the photo button still works. I've tried reseting it multiple times, and powering it off multiple t
-
The item you've requested is not currently available in the US store.....
I am trying to download "The Blind Side" on my iPad, but I'm getting this message. Apparently the movie is available for download ... http://www.apple.com/itunes/charts/movies/the-blind-side-/ So what's the problem??