Help with HP Laserjet 1220 network printer.

I have an HP Laserjet 1220 connected via USB to my old G4 running OS 10.2 in my home office. I have a MacBook now running 10.7.4. Both computers are on my wireless network using on a Linksys E1000. When my MacBook was running 10.4 I had no problems printing to my HP printer. Once I upgraded my MacBook to 10.6 and eventually now to 10.7.4, I can no longer connect to my HP printer. The only way I can print from my MacBook is to connect to my HP Laserjet 1220 via USB. I have tried many times to set up my printer, but no success. Can anyone help me? Many thanks.

10.2 is very very old. Alternate solutions:
1. Replace the Linksys Router with an Airport Extreme, plug printer into USB port on router.
2. Keep your Linksys but add an Airport Express which can join your WiFi and share the printer. Or buy a cheaper print server http://www.bestbuy.com/site/Networking-Accessories/Wireless-Print-Servers/abcat0 503006.c?id=abcat0503006
3. Buy a new printer with WiFi built in.
All three options mean you don't need to keep the G4 powered on to print wirelessly from the MacBook Pro.

Similar Messages

Problem with Lion 10.7.3 with hp laserjet 3600n network printer

Hi
Problem with Lion 10.7.3 with hp laserjet 3600n network printer
Guys i am having a mad day with this new OS and some network printer none of them work with new LION,The software for this printer is currently unavaliable. Please contact the printers manufacturer for the latest software, i need the drivers for this, please give a hand with this issue
Best Regards

Exactly the same infuriating problem we and many others get with OS X from 10.6 on when Apple dropped Apple Talk.
Having spent days fighting to get drivers that will run our older laser printers like HP5000, 5100, 2100, 2200 and 4MV, we came up with a simple solution:
We use an iMac running 10.5.8 as a print server. All the 10.6 upwards Macs on the same network will see and add the printers immediately through the shared older (Apple Talk) iMac.
Cheapest and simplest option really .... it'sannoying that a brand new Mac can no longer see existing network printers without complex investigation and trying various downloads.
Answer is simple and cheap if you happen to own a 4 or 5 year old Mac with an OS lower than 10.6 which still has Apple Talk.

LaserJet 2550n network printer on XP host PC, can't install Windows 7 client laptop

Have Color LaserJet 2550n network printer connected to XP host PC. I can't install Windows 7 client laptop for printer. The wireless network is fine, I can access documents back and forth, merely the printer doesn't work and there's no way to download 64bit drivers for this printer from HP.

Resolved, not solved.
I talked to HP product support. The Officejet Pro 8500 A910 will not install on Windows XP (at least the Home Edition) when networked through a router. It will install through USB. I uninstalled the program and reinstalled it with only USB connected to clean out all the network printer/scanner information. Product support claimed it would install through an ether net cable connected between the printer and computer but this does little good if you need internet access.

Unable to install hp Color LaserJet 3600n network printer on new Windows 7 (64bit) PC.

Unable to install hp Color LaserJet 3600n network printer on new Windows 7 (64bit) PC. According to Microsoft Windows Compatibility Center website (http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=HP%20Col...) this printer is compatible.
I have tried everythingto no avail. HP will not support and have, very little online resources addressing this particular issue. What should I do?

This may help: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02538616&lang=en&cc=us
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Laserjet 4250 Network Printer Connection Issues

Hello
We have a HP 4250 Laserjet network printer set up as a shared printer on our Windows Server 2003 32-bit print server.
We are using the latest PCL 5e 32-bit drivers and have now added the PCL 5e 64-bit drivers to accomodate a new Windows 7 Pro 64-bit Laptop. However, although it appears to pull the driver across properly, it fails to communicate and complete the installation with the following error:
"Printer Cannot Connect Operation Failed' error 0000007e
I have apoplied the hotfix addressed which addresses a similar problem but this made no difference. http://support.microsoft.com/kb/981070/en-gb
Any ideas what I could try next?
Kind Regards
Simon Emms

Hello Tornado1,
The HP Laserjet 4250 is a commercial printer. To have a better chance at finding a solution, I recommend posting in the HP Business Support Forum.
Here is the link to the Commercial Laserjet board:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

HP Color LaserJet 2605dn Network Printing

Here we go again. I just upgraded the Windows 7 and I am still having the same network printing issues I encountered in Vista.
1. It doesn't appear that there is a Windows 7 32-bit driver for this printer, am I wrong? I found the drivers page for this printer and it is VERY POORLY written. All I can surmise is that I should install a universal printer driver.
2. The printer is going OFFLINE constantly. This printer is connected directly to my hub with a network cable. I have two other printers on my network, one is a Brother and another is a Canon. I have never ONCE experienced this issue with their printers. They just work like they are supposed to. Why does this continually happen with this HP printer. The only resolution I have found is to delete the printer and add it back. Every two days delete the printer and add it back, uggghhhh. Give me a break, don't you guys test this stuff before you sell it?
As you can see I am not a happy camper.

DaleA wrote:
I'd like to add that the driver provided by HP doesn't allow duplex printing - one of the main reasons I purchased the 2605 printer. Is there a duplex option available?
Surely, my 2605 is still within its service life. I would have expected HP to do a better job in the transistion to Windows 7 than throwing out some awful generic driver...
Enable the duplexer as described in the Vista/WIndows 7 Duplex Troubleshooting guide as described here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Hp laserjet p1102w networked printer shuts itself off

Hi, I have a networked (not wireless network) printer, which is plugged into a computer that is always on. However, it shuts itself off randomly, even though I have set it to never do so. This means that users must walk over, turn the printer on, and occasionally restart their computers before they are able to print, which sometimes causes them to lose work. Occasionally the users will also receive a message like:
The printer spooler on the server was not responding
Which means someone must reset the server spooler before it will print.
I have also set it to go into power-save mode at the longest interval, one hour, but it frequently goes to sleep within minutes of a print-job, often sparking the above issues.
If there is anything that I can do further to keep from forcing the users to constantly turn it on, or to keep from having to restart the spooler every day, that would be great.
I am working with machines using Windows 7 and 8, and with a Windows Server 2012.

I got to this screen by going to the web interface by typing the printer's IP address into a web-browser's address bar.
Sorry for the delayed response. I will do my best to assist you when I get home.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Help connecting Macbook Air to network printer

Hi, i am having trouble connecting a HP OfficeJet 7612 to a Macbook Air running OS X Yosemite 10.10.2 (14C109).
The printer is connected to the router via Ethernet and the Macbook is connected to the router via Wifi.
When searching for printers through the HP Utility setup or just by adding a printer it does not show anything in the list of available printers.
There is an iMac in the office running Yosemite and that found the printer straight away, asked to download additional software and was working in minutes.
I can add the printer by IP address but i can only print to it. It says at the bottom of the window "Please note: An IP connection is supported. However, only the print feature will work properly." This is an all-in-one device and we would like to be able to use the scan feature on the Macbook.
Things i have tried already:
Uninstalling the driver, printer and software with the HP Uninstaller, this includes a "Reset printing system…"
Downloading and installing the latest drivers and software from the HP website.
Repairing Disk Permissions.
In the printers EWS chaning the Bonjour Highest Priority Service to 9100 Printing.
Disabling IPv6 on the printer.
Restarting the router and printer.
I personally feel it is not a problem with the printer but a problem with Network discovery / Airport settings on the Macbook
Any help would be really appreciated thanks!

Network Printer Troubleshooting

HP Laserjet 1606dn , network printing problem.

Hi all,
I have new HP Laserjet 1606dn. When I setup for USB printing, it can print fine. But when I setup this printer to be network printer, when I order to print 1 page, it always continue printing. I can';t stop printing. I have 5 printers for this model. When I setup another printers, it is still be the same. Anybody can give me the solution. Thank you very much.

I retried the installation from the driver after having cleaned previous installation and having unplugged the printer.
Same problem re-occured
Here the log containing the error
EDC): _PostProgressMessage hWnd=0x60206 msg=1125, param=13074
[11-19-2009 8:22:39:391]- LOG(EDC): Preinstalling inf C:\Users\Admin\AppData\Local\Temp\7zS58EC\HPLJM1005.INF
[11-19-2009 8:22:39:391]- LOG(820): IDLCProgressDlg:nCurrentProgressMsg()
[11-19-2009 8:22:39:391]- LOG(820): msg=Preinstalling the driver files ...
[11-19-2009 8:22:41:216]- LOG(EDC): SetupCopyOEMInf failed gle=2
[11-19-2009 8:22:41:216]- LOG(EDC): PreInstallDriverFiles()
[11-19-2009 8:22:41:216]- LOG(EDC): _PreInstallDriverFiles()
[11-19-2009 8:22:41:216]- LOG(EDC): inf:C:\Users\Admin\AppData\Local\Temp\7zS58EC\HPLJM1005.INF
[11-19-2009 8:22:42:761]- LOG(EDC): DriverPackagePreinstall = -536870141, flags=0x14
[11-19-2009 8:22:42:761]- LOG(EDC): ===>>> ERROR (gle=-2146499837, 0xe0000303): Msg: (null) Context: DriverPackagePreinstall failed
[11-19-2009 8:22:43:775]- LOG(EDC): _PreInstallDriverFiles()
[11-19-2009 8:22:43:775]- LOG(EDC): inf:C:\Users\Admin\AppData\Local\Temp\7zS58EC\HPLJM1005.INF
[11-19-2009 8:22:45:194]- LOG(EDC): DriverPackagePreinstall = -536870141, flags=0x14
[11-19-2009 8:22:45:194]- LOG(EDC): ===>>> ERROR (gle=-2146499837, 0xe0000303): Msg: (null) Context: DriverPackagePreinstall failed
[11-19-2009 8:22:45:194]- LOG(EDC): Diffx Preinstall FAILED, trying SetupCopyOEMInf: C:\Users\Admin\AppData\Local\Temp\7zS58EC\HPLJM1005.INF
[11-19-2009 8:22:45:194]- LOG(EDC): ProcessFailure(3) NEXT=0, BACK=1, CANCELED=2, FAILED=3
[11-19-2009 8:22:45:194]- LOG(EDC): _PostProgressMessage hWnd=0x60206 msg=1129, param=0
[11-19-2009 8:22:45:210]- LOG(EDC): InstallSequencer() step = 4
[11-19-2009 8:22:45:210]- LOG(820): IDLCProgressDlg:nStopCurrentProgress()
[11-19-2009 8:22:45:210]- LOG(EDC): --- PreInstallStep ---
After that he retries to install the driver, but inside the previous install directory.

Trouble Printing Multiple Pages in Quick Succession - LaserJet P4015x - Networked Printer

Hi,
We are currently experiencing problems printing multiple pages in quick succession. We use a bespoke Microsoft Access Database to run our Sales Order Processing. As part of this software we print 3 part invoices, credit notes etc on different coloured paper. We do this by printing to different printer trays. Originally we tried automating the printer tray configuration through VBA code using one report and changing the print tray as part of the print process but were having problems with Microsoft Access freezing. As result we have resorted to printing 3 different reports straight after each other (using VBA code) but with each report specified to print from a different tray.
We are current using tray 2 (500 sheet feeder - standard A4 paper), tray 3 (500 sheet feeder - standard A4 paper) & tray 4 (500 sheet feeder - standard A4 paper).
The current setup does print a copy from each tray and does give us what we want apart from the whole print process being very slow.
The first page comes out from tray 2 at the normal speed you would expect from a network printer but then we start to have issues.
Sometimes the second page from tray 3 will come out quickly but the third page (from tray 4) will be very slow or both pages 2 & 3 will be slow to print. There seems to be no pattern as to why these are slow. To make matters even worse sometimes it will print correctly and all three pages come out in very quick succession (although rarely).
We are using modern PC's (running Windows XP SP 3 with 2GB RAM & 160GB HDD) and the print command is definately being sent to the printer in quick succession - as far as I can tell. I have tried to setting the printers to print through the server and setting them up to print directly to the printer using the built in print server in P4015x.
The printers are networked to a Windows SBS 2008 server with quad core processors and 16GB RAM. The server is only used as a file and print server and is not under heavy load.
I will also point out that I have tried printing to another HP printer (4250dtn) and it has exactly the same problems.
I have removed advanced printing features from the printer driver setup on the client PC's but it does not seem to make any difference. I have also tried printing directly to the printer rather than spooling.
I have updated the drivers to the latest one on the HP website and still no change.
I would appreciate any ideas any one might have to sort the problem out.

Did you ever solve this?
I'm doing the exact same thing: three print outs in succession to a specific tray on a network shared printer and occasionally getting a MS Access printing error 2212 counldn't print you object. Printer setup is saved with the reports one for each printer tray.
I'm printing from bespoke MS Access 2002 application using runtime to HP LJ 4100 on Citrix terminal server session.
Any info you have would be appreciated.

Help needed to setup to Network Print Server

Hi,
I am trying to configure the following to print from my Mac:
D-Link DP-301U USB print server
HP Color LaserJet 3500
MacBook Core Duo OS X 10.4.8
Very little information is available on both D-Link and HP website.
The D-Link installation guide says to install via AppleTalk.
AppleTalk has been activated on my AirPort as well as on the Web configuration of Print Server. However I cannot see any printer on adding a printer.
In the Add Printer Browser, I can see my print server on Bonjour. When selected, I am supposed to choose my HP printer, but it is no on the HP printer list.
Only Generic PostScript can be selected, however when printing, it prints our garbage.

A long time ago, I worked on a print spooler and was lent a JetDirect
box from HP to test with. A JetDirect card is in your LaserJet, I believe.
(One of the protocols it supported was localtalk, BTW). I think the
d-link isn't forwarding your localtalk packets. Anyway, one of the
things I remember is that the JetDirect spoke PCL, so that's another
consideration a driver has to deal with. The garbage you're seeing
is raw postscript. It needs to be rasterized and translated to PCL.
Please bear with me, my experience is very old, and there are gaps
in my knowledge. But I think this is do-able. I think the first step is
to add the printer directly by clicking here,
The location of the printer should be the address of the print server
(or canonical name if you're ever going to change addresses). The
device should be appsocket/jetdirect. The device uri should be
socket://nameoripaddressofdevice. The make should be HP and
the model/driver should be one of the Laserjet series, gimp-print.
I don't know which one, my experience ended around Laserjet 5, and
so do the drivers! But fundamentally they have to do the same thing.
They use the gimp-print package to rasterize the postscript and
encapsulate it into PCL. So I would bet the LaserJet 6 driver will work.
I'm sure everything posted here is correct, and that my experience
is too old and I don't know enough to know why this won't work,
but it's not a lot of effort, and if I were you I'd give it a try.
-Phil
Powerbook G4, iMac (Intel), and tons of hardware sitting in the closet Mac OS X (10.4.8)

Lexmark T522 Network printer busy. Works with PC., Lexmark T522 Network printer busy. Works with PC.

I've been trying to setup my T522 network printer with my OS X 10.6.7. All I get when I try to print is a busy indication. I can get control of the printer through the IP address and all seems fine. Also I just got it to work through my PC first time. Thanks

Did you get drivers from the Lexmark website?
Printing solution for Mac OS X v.10.6
Is "wired" via USB or ethernet? If USB, you may need to run the printer through a powered hub to keep the power up. Looks like you have to use an optional ethernet card with that model--a great solution if you have it.
I think Appletalk is dead for higer versions of OSX.

HP Laserjet 4100n network printer driver fails to install

I am trying to install the printer driver for an HP 4100n laserjet on an XP machine. I have downloaded the file "hp LaserJet 4100 Printing System (61.3 MB) from the HP web site. First issue is that upon executing the setup exe file the InstallShield stops at 99%. I have to end it via Windows Task manager. Occassionally I can get to 100% but I have no idea why only occassionally. If I boot into Safe Mode I get to 100% everytime.
Once in Safe Mode the wizard seems to operate properly, finding the printer on the network and returning the correct TCP address. I get to the end of the wizard and I get a Sever Error message and the wizard terminates.
I have two laptops and one other desktop connected to the 4100n via the network. I must be doing something wrong and could use some suggestions.
Thanks

Hi Cupcakekid,
This is a commercial line product. For the best answer to your questions you will need to repost your question to the following links.
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

How can I configure to use a HP Laserjet 4000 network printer on Solaris 8?

Hi,
I have to configure a Solaris 8 machines to print some doc on a network HP Laserjet printer. However, I have no idea how to configure it. Do anyone have some suggestion how to do it?
Do I need JetDirect to do so?
If yes, how can I get it?
Thx a lot!

Easiest and quickest way is with Jetdirect or the later HPPI - both available from HP.

Cups / HP Laserjet 4200 network printer

Cups can get on my nerves bigtime.
at first, I just installed cups, and soffice (libreoffice) would , in the 'print dialog' show me a bunch of network printers it found, but when i printed to any of them,
the job would just stick to 'in process' in the cups webinterface, even though the printer was idle.
I then installed hplip 3.11.1-1, hpoj 0.91-15, avahi and a whole bunch of other packages:
[2011-02-14 16:27] Running 'pacman -S hplip'
[2011-02-14 16:28] installed foomatic-db (4.0.6_20101215-1)
[2011-02-14 16:28] installed foomatic-filters (4.0.6_20101215-1)
[2011-02-14 16:28] installed foomatic-db-engine (4.0.6_20101215-1)
[2011-02-14 16:28] installed net-snmp (5.5-7)
[2011-02-14 16:28]
[2011-02-14 16:28] NOTE
[2011-02-14 16:28] ----
[2011-02-14 16:28] # If you want to use this driver with sane:
[2011-02-14 16:28] # echo "hpaio" >> /etc/sane.d/dll.conf
[2011-02-14 16:28]
[2011-02-14 16:28] installed hplip (3.11.1-1)
[2011-02-14 16:34] Running 'pacman -S samba'[2011-02-14 16:27] Running 'pacman -S hplip'
[2011-02-14 16:28] installed foomatic-db (4.0.6_20101215-1)
[2011-02-14 16:28] installed foomatic-filters (4.0.6_20101215-1)
[2011-02-14 16:28] installed foomatic-db-engine (4.0.6_20101215-1)
[2011-02-14 16:28] installed net-snmp (5.5-7)
[2011-02-14 16:28]
[2011-02-14 16:28] NOTE
[2011-02-14 16:28] ----
[2011-02-14 16:28] # If you want to use this driver with sane:
[2011-02-14 16:28] # echo "hpaio" >> /etc/sane.d/dll.conf
[2011-02-14 16:28]
[2011-02-14 16:28] installed hplip (3.11.1-1)
[2011-02-14 16:34] Running 'pacman -S samba'
[2011-02-14 16:34] installed libgssglue (0.1-3)
[2011-02-14 16:34] installed libtirpc (0.2.1-2)
[2011-02-14 16:34] installed rpcbind (0.2.0-3)
[2011-02-14 16:34] installed fam (2.7.0-14)
[2011-02-14 16:34] installed samba (3.5.6-1)
[2011-02-14 17:30] Running 'pacman -S cups ghostscript gsfonts'
[2011-02-14 17:30] upgraded cups (1.4.6-1 -> 1.4.6-1)
[2011-02-14 17:30] upgraded ghostscript (9.00-4 -> 9.00-4)
[2011-02-14 17:31] Updating font cache... done.
[2011-02-14 17:31] installed gsfonts (1.0.7pre44-2)
[2011-02-14 17:31] Running 'pacman -S foomatic-db foomatic-db-engine foomatic-db-nonfree foomatic-filters'
[2011-02-14 17:31] upgraded foomatic-db (4.0.6_20101215-1 -> 4.0.6_20101215-1)
[2011-02-14 17:31] upgraded foomatic-filters (4.0.6_20101215-1 -> 4.0.6_20101215-1)
[2011-02-14 17:31] upgraded foomatic-db-engine (4.0.6_20101215-1 -> 4.0.6_20101215-1)
[2011-02-14 17:31] installed foomatic-db-nonfree (4.0.6_20101215-1)
[2011-02-14 17:32] Running 'pacman -S gutenprint foomatic-db foomatic-db-engine foomatic-db-nonfree foomatic-filters hplip splix ufr2 cups-pdf'
[2011-02-14 17:34] Running 'pacman -S hpoj'
[2011-02-14 17:34] ==> To get the HP-Officejet working run as root: ptal-init setup
[2011-02-14 17:34] ==> Add ptal-init to /etc/rc.conf daemon list and place it before cups is started!
[2011-02-14 17:34] ==> To access scanner enable in /etc/sane.d/dll.conf hpoj line.
[2011-02-14 17:34] installed hpoj (0.91-15)
[2011-02-14 17:46] Running 'pacman -S avahi nss-mdns'
[2011-02-14 17:46] upgraded avahi (0.6.28-1 -> 0.6.28-1)
[2011-02-14 17:46] ==> To enable IPv4 multicast DNS lookups, append 'mdns4' to the hosts line
[2011-02-14 17:46] in /etc/nsswitch.conf. Use 'mdns6' for IPv6 or 'mdns' for both.
[2011-02-14 17:46] installed nss-mdns (0.10-2)
[2011-02-14 16:34] installed libgssglue (0.1-3)
[2011-02-14 16:34] installed libtirpc (0.2.1-2)
[2011-02-14 16:34] installed rpcbind (0.2.0-3)
[2011-02-14 16:34] installed fam (2.7.0-14)
[2011-02-14 16:34] installed samba (3.5.6-1)
[2011-02-14 17:30] Running 'pacman -S cups ghostscript gsfonts'
[2011-02-14 17:30] upgraded cups (1.4.6-1 -> 1.4.6-1)
[2011-02-14 17:30] upgraded ghostscript (9.00-4 -> 9.00-4)
[2011-02-14 17:31] Updating font cache... done.
[2011-02-14 17:31] installed gsfonts (1.0.7pre44-2)
[2011-02-14 17:31] Running 'pacman -S foomatic-db foomatic-db-engine foomatic-db-nonfree foomatic-filters'
[2011-02-14 17:31] upgraded foomatic-db (4.0.6_20101215-1 -> 4.0.6_20101215-1)
[2011-02-14 17:31] upgraded foomatic-filters (4.0.6_20101215-1 -> 4.0.6_20101215-1)
[2011-02-14 17:31] upgraded foomatic-db-engine (4.0.6_20101215-1 -> 4.0.6_20101215-1)
[2011-02-14 17:31] installed foomatic-db-nonfree (4.0.6_20101215-1)
[2011-02-14 17:32] Running 'pacman -S gutenprint foomatic-db foomatic-db-engine foomatic-db-nonfree foomatic-filters hplip splix ufr2 cups-pdf'
[2011-02-14 17:34] Running 'pacman -S hpoj'
[2011-02-14 17:34] ==> To get the HP-Officejet working run as root: ptal-init setup
[2011-02-14 17:34] ==> Add ptal-init to /etc/rc.conf daemon list and place it before cups is started!
[2011-02-14 17:34] ==> To access scanner enable in /etc/sane.d/dll.conf hpoj line.
[2011-02-14 17:34] installed hpoj (0.91-15)
[2011-02-14 17:46] Running 'pacman -S avahi nss-mdns'
[2011-02-14 17:46] upgraded avahi (0.6.28-1 -> 0.6.28-1)
[2011-02-14 17:46] ==> To enable IPv4 multicast DNS lookups, append 'mdns4' to the hosts line
[2011-02-14 17:46] in /etc/nsswitch.conf. Use 'mdns6' for IPv6 or 'mdns' for both.
[2011-02-14 17:46] installed nss-mdns (0.10-2)
however, now the printers don't show up anymore in soffice, nor in the webinterface. *sometimes* when I search for printers, it will show them, but not always.
and when it shows them, it only shows the model and type, not the human assigned name/description (which I saw at first)
18:15:10 dieter@Gi ~ ps aux | egrep 'avahi-daemon|cups|dbus' 1 ↵
dbus 3250 0.0 0.0 12908 960 ? Ss 17:53 0:00 /usr/bin/dbus-daemon --system
avahi 3264 0.0 0.0 29832 1596 ? S 17:53 0:00 avahi-daemon: running [gibran.local]
avahi 3265 0.0 0.0 29576 424 ? S 17:53 0:00 avahi-daemon: chroot helper
root 3274 0.0 0.0 79872 3496 ? Ss 17:53 0:00 /usr/sbin/cupsd -C /etc/cups/cupsd.conf
dieter 3322 0.0 0.0 19844 544 ? S 17:53 0:00 dbus-launch --autolaunch 57268404aa6c45d55d1fe94700000389 --binary-syntax --close-stderr
dieter 3323 0.0 0.0 12908 1064 ? Ss 17:53 0:00 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
dieter 4629 0.0 0.0 6020 976 pts/2 S+ 18:15 0:00 egrep avahi-daemon|cups|dbus
Add to that the fact that even though I go to localhost:631 or 127.0.0.1:631, cups generates links to my external ip, which is the interface cups doesn't listen on.
painful!
my cups config is default, error logfile contains:
18:16:58 dieter@Gi ~ grep -v ^D /var/log/cups/error_log | grep -v ^I
E [14/Feb/2011:16:19:55 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [14/Feb/2011:16:30:02 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [14/Feb/2011:16:35:55 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [14/Feb/2011:17:02:22 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [14/Feb/2011:17:09:11 +0100] [CGI] Unable to create avahi client: No such file or directory
E [14/Feb/2011:17:09:11 +0100] [cups-deviced] PID 25026 (dnssd) stopped with status 1!
E [14/Feb/2011:17:09:33 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
E [14/Feb/2011:17:24:26 +0100] [Job 2] Unable to queue job for destination "ipp://157.193.135.100:631/printers/PRINTER_3THFLOOR"!
E [14/Feb/2011:17:24:26 +0100] [Job 1] Unable to queue job for destination "ipp://157.193.135.100:631/printers/PRINTER_3THFLOOR"!
E [14/Feb/2011:17:24:26 +0100] [Job 3] Unable to queue job for destination "ipp://157.193.135.100:631/printers/Oce-3165"!
E [14/Feb/2011:17:24:26 +0100] [Job 4] Unable to queue job for destination "ipp://157.193.135.100:631/printers/PRINTER_3THFLOOR"!
E [14/Feb/2011:17:24:26 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [14/Feb/2011:17:34:19 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [14/Feb/2011:17:35:10 +0100] [CGI] Unable to create avahi client: No such file or directory
E [14/Feb/2011:17:35:10 +0100] [cups-deviced] PID 26255 (dnssd) stopped with status 1!
E [14/Feb/2011:17:35:19 +0100] [CGI] Unable to create avahi client: No such file or directory
E [14/Feb/2011:17:35:19 +0100] [cups-deviced] PID 26282 (dnssd) stopped with status 1!
E [14/Feb/2011:17:48:35 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [14/Feb/2011:17:53:39 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
those errors are from *before* I installed avahi, after installing avahi I can't even select the printer :x

a bit more info: after a reboot i somehow magically see the printers again (both in the webinterface and in soffice), but when I send it a print job, I notice the printer status is
Idle - "Connecting to printer..."
so maybe this is some kind of networking problem? weirdly enough location is set to "location unknown" so I cannot do a ping test.
and the only errors in the logfile are "SSL shutdown failed: Error in the push function" (probably because of using https on the webinterface), so I'm clueless

Help with HP Laserjet 1220 network printer.

Similar Messages

Maybe you are looking for