Help with hp smart print

I am running win 8 and have an hp allinone 6600 e printer and activated hp smart print and activated it as and add on in win explorer 10, it works to where i can select what i want to delete, but there is no where to go from there. is there an step by step instruction for smart print if so where?
This question was solved.
View Solution.

There is a page with information about how to use Smart Print. Follow this link to get to the information.
Hope this helps.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Similar Messages

HT4199 I need help with getting my printer to print, PLEASE.

I need help with getting my printer to print, Please.

What have you done so far?
I suggest you connect it via a usb cable first. Once you get the printer working, move to wifi. You will have to use an existing printer usb cable or purchase a cable. Be sure to get the correct cable. Ask for help.
The warrenty indicates there is phone support. Give HP a call.
Warranty
One-year limited hardware warranty; 24-hour, 7 days a week phone support
Robert

Help with HP Laser Printer 1200se

HP Support Line,
Really need your assistance. I have tried both contacting HP by phone (told they no longer support our printer via phone help), the tech told me that I needed to contact HP by e-mail for assistance. I then sent an e-mail for assistance and got that reply today, the reply is as follows "Randall, unfortunately, HP does not offer support via e-mail for your product. However many resources are available on the HP web site that may provide the answer to your inquiry. Support is also available via telephone. A list of technical support numbers can be round at the following URL........." The phone numbers listed are the ones I called and the ones that told me I needed to contact the e-mail support for help.
So here I am looking for your help with my issue.
We just bought a new HP Pavillion Slimline Desk Top PC (as our 6 year old HP Pavillion PC died on us). We have 2 HP printers, one (an all-in-one type printer, used maily for copying and printing color, when needed) is connected and it is working fine with the exception of the scanning option (not supported by Windows 7). However we use our Laser Printer for all of our regular prining needs. This is the HP LaserPrinter 1200se, which is about 6 years old but works really well. For this printer we currently only have a parallel connection type cord and there is not a parallel port on the Slimline HP PC. The printer also has the option to connedt a USB cable (we do not currently have this type of cable).
We posed the following two questions:
1. Is the Laser Jet 1200se compatible with Windows 7?
and if this is the case
2. Can we purchase either a) a USC connection cord (generic or do we need a printer specific cord)? or b) is there there a printer cable converter adapater to attach to our parallel cable to convert to a USB connection?
We do not want to purchase the USB cable if Windows 7 will not accept the connection, or if doing this will harm the PC.
We really would appreciate any assitance that you might give us.
Thank you,
Randy and Leslie Gibson

Sorry, both cannot be enabled by design. That said, devices on a network do not care how others are connected. You can print from a wireless connection to a wired (Ethernet) printer and v/v.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Can you help with wireless usb printing?

I have a D-Link router ([DI-824VUP) that works fine as far as geting online and printing to an ethernet printer,(HP1300n) wirelessly. I recently bought this router because it has a usb printer port, yet I can not get it to see the usb printer (Canon S830D). D-Link was no help, as they don't support Apple wireless printing, even though they do support wired printing via their router. QUESTION-any idea how to get powerbook to see the printer when connected to the router? Printer setup utility does not see it, only the HP. Thanks-bobbabe
OS 10.3.9.
Titanium Powerbook 667. Mac OS X (10.3.9) D-Link router(DI-824VUP)

Because this forum software is so absolutely USELESS now, you don't get to see the whole of the question in this view. In the other (non-list) view it says:
"can you help with a technical problem with the stereo imagery option ? it won't take out lead vocal in a stereo mp3"
And the answer is that if you can't isolate the vocal in the stereo field, or it is one of these odd ones where it's used inverted polarity in different parts of the stereo signal for the same vocal, then you won't be able to. But without a sample, it's impossible to tell. If you can post a link to one, that might help. It has to be external to this site though - Adobe in their infinite wisdom don't allow the posting of audio files on their audio U2U forum. Helpful, that, isn't it?

Bing-Bar help needed for Smart Print activation

I attempted to install Bing bar, but get the message that my computer will only install in Explorer,which is what I am using. I have a Windows xp, and an HP Photosmart printer

You don't need the Bing bar for smart print any longer. I'm using IE9 and have uninstalled the Bing bar.

Desperately need help with a networked printer and SMB sharing for windows

Complete xServ newbie here. I'm a windows/novell admin, with limited experience in Unix and Linux.
Against my advice, a client of mine that owns a small office of 20 people bought an XServG5 to act as a server for 20 mixed Windows PCs. File sharing services are working fine. I've created the users, set up groups and rights - that's all good.
I cannot get an SMB shared printer to work from the windows machines. They run through the network printer install just fine, it shows up online, etc. However, when print jobs are submitted they DO show up in the printer queue on the server, sit there for a while, and then get moved to the completed box.
They never print. There's not any indication that the job is even submitted to the printer. I can print to the printer just fine from the server itself, but the windows clients don't work, but they don't return an error message.
Print services are running on the server, I've configured the printer name to be less than 12 characters for the share, and indeed it does pop right up during the "add network printer" routine.
Ideas? I'm not even sure what questions I'm supposed to be asking, such is my ignorance of the OS. I do know that I followed the documentation to a T, and according to Apple this should work.
Thanks in advance for the help. I'm extremely frustrated.

We have the same problem. Our printer worked for about 2 years but failed similar to yours after a system update.
Can you go into the Windows service, Logs, Printer Service. Copy and paste the log here. What I am looking for is a line like lpr: CANNOTCONNECTCLIENT or something similar to this.
What I expect is that you have a problem where the cups defined printer is not usable. We can't get our problem fixed either - but am just curious if you have the same thing. We reloaded our server, applied all of the update and still cannot get it to work.
Again, I think it stems from the update.

Help with code to print HTML in Java 5

Hi,
The following code works and runs successfully..
However, the printing in Java 1.4.2_03 is better than Java 5 (latest version).
i.e in particular the characters are not monospaced compared with compiling with Java 1.4.2_03. e.g si so ss squashed together.
This issue does not seem to occur when running the same code in Java 1.4.2_03. (I haven't tried other 1.4.2 java versions).
Any help would be appreciated. We really need this working under Java 5 or bust.
Here is the complete listing ... PrintHtml.java (it uses the DocumentRenderer)
and following this is the input file.
import javax.swing.text.html.HTMLDocument;
import java.net.URL;
import java.net.MalformedURLException;
import java.io.IOException;
import java.io.DataInputStream;
import java.io.InputStream;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.io.*;
import javax.swing.*;
import javax.swing.text.*;
import javax.swing.text.html.*;
import java.lang.reflect.*;
import java.awt.Graphics;
import java.awt.Graphics2D;
import java.awt.Rectangle;
import java.awt.Shape;
import java.awt.print.PageFormat;
import java.awt.print.Printable;
import java.awt.print.PrinterException;
import java.awt.print.PrinterJob;
import javax.swing.JEditorPane;
import javax.swing.text.Document;
import javax.swing.text.PlainDocument;
import javax.swing.text.View;
import javax.swing.text.html.HTMLDocument;
import java.awt.*;
import javax.swing.*;
import java.awt.print.*;
import java.text.ParseException;
public class PrintHtml {
     * Utility helper to convert HTML Text to HTML Document.
     * @param baseUrl URL to be used in order
     * to resolve relative HTML references, in lieu of an
     * HTML BASE tag. May be null, if not required or HTML
     * BASE tag is to be used.
     * @see jbox.view.jfx.JboxHtmlEditor
     * @see jbox.utility.JboxPrint
     * @see jbox.utility.JboxPrintUtil
public static HTMLDocument htmlTextToHtmlDoc(String htmlText, URL baseUrl)
          try
          // JboxHtmlEditorKit editorKit = new JboxHtmlEditorKit();
            HTMLEditorKit editorKit = new HTMLEditorKit();
            HTMLDocument doc = (HTMLDocument)editorKit.createDefaultDocument();
               if (baseUrl != null)
                    try
                         doc.setBase(baseUrl);
                    catch(Exception e)
                         //JboxTraceManager.trace(e);
               StringReader reader = new StringReader(htmlText);
               editorKit.read(reader, doc, 0);
         return doc;
          catch(Exception e)
               //JboxTraceManager.trace(e);
               return null;
   public static void main(String[] args) {
      System.out.println("printing...");
      HTMLDocument x = new HTMLDocument();
      DocumentRenderer invoice = new DocumentRenderer();
      //invoice.setScaleWidthToFit(false);
      String s = "";
      try {
        BufferedInputStream bis = new BufferedInputStream(new FileInputStream("mark.html"));
        InputStreamReader in = new InputStreamReader(bis , "ASCII");
        StringWriter sw = new StringWriter();
        while (true) {
           int datum = in.read();
           if (datum == -1) break;
           sw.write(datum);
        in.close();
        s = sw.toString();
        System.out.println("s="+s);
      catch (IOException e) {
         System.err.println(e);
      HTMLDocument htmldoc = htmlTextToHtmlDoc(s, null);
      invoice.print(htmldoc);
// the good old infamous DocumentRenderer.
/* Copyright 2002
    Kei G. Gauthier
    Suite 301
    77 Winsor Street
    Ludlow, MA 01056
class DocumentRenderer implements Printable {
/* DocumentRenderer prints objects of type Document. Text attributes, including
    fonts, color, and small icons, will be rendered to a printed page.
    DocumentRenderer computes line breaks, paginates, and performs other
    formatting.
    An HTMLDocument is printed by sending it as an argument to the
    print(HTMLDocument) method. A PlainDocument is printed the same way. Other
    types of documents must be sent in a JEditorPane as an argument to the
    print(JEditorPane) method. Printing Documents in this way will automatically
    display a print dialog.
    As objects which implement the Printable Interface, instances of the
    DocumentRenderer class can also be used as the argument in the setPrintable
    method of the PrinterJob class. Instead of using the print() methods
    detailed above, a programmer may gain access to the formatting capabilities
    of this class without using its print dialog by creating an instance of
    DocumentRenderer and setting the document to be printed with the
    setDocument() or setJEditorPane(). The Document may then be printed by
    setting the instance of DocumentRenderer in any PrinterJob.
protected int currentPage = -1;               //Used to keep track of when
                                                //the page to print changes.
protected JEditorPane jeditorPane;            //Container to hold the
                                                //Document. This object will
                                                //be used to lay out the
                                                //Document for printing.
protected double pageEndY = 0;                //Location of the current page
                                                //end.
protected double pageStartY = 0;              //Location of the current page
                                                //start.
protected boolean scaleWidthToFit = true;     //boolean to allow control over
                                                //whether pages too wide to fit
                                                //on a page will be scaled.
/*    The DocumentRenderer class uses pFormat and pJob in its methods. Note
      that pFormat is not the variable name used by the print method of the
      DocumentRenderer. Although it would always be expected to reference the
      pFormat object, the print method gets its PageFormat as an argument.
protected PageFormat pFormat;
protected PrinterJob pJob;
/* The constructor initializes the pFormat and PJob variables.
public DocumentRenderer() {
    pFormat = new PageFormat();
    pJob = PrinterJob.getPrinterJob();
/* Method to get the current Document
public Document getDocument() {
    if (jeditorPane != null) return jeditorPane.getDocument();
    else return null;
/* Method to get the current choice the width scaling option.
public boolean getScaleWidthToFit() {
    return scaleWidthToFit;
/* pageDialog() displays a page setup dialog.
public void pageDialog() {
    pFormat = pJob.pageDialog(pFormat);
/* The print method implements the Printable interface. Although Printables
    may be called to render a page more than once, each page is painted in
    order. We may, therefore, keep track of changes in the page being rendered
    by setting the currentPage variable to equal the pageIndex, and then
    comparing these variables on subsequent calls to this method. When the two
    variables match, it means that the page is being rendered for the second or
    third time. When the currentPage differs from the pageIndex, a new page is
    being requested.
    The highlights of the process used print a page are as follows:
    I.    The Graphics object is cast to a Graphics2D object to allow for
          scaling.
    II.   The JEditorPane is laid out using the width of a printable page.
          This will handle line breaks. If the JEditorPane cannot be sized at
          the width of the graphics clip, scaling will be allowed.
    III. The root view of the JEditorPane is obtained. By examining this root
          view and all of its children, printView will be able to determine
          the location of each printable element of the document.
    IV.   If the scaleWidthToFit option is chosen, a scaling ratio is
          determined, and the graphics2D object is scaled.
    V.    The Graphics2D object is clipped to the size of the printable page.
    VI.   currentPage is checked to see if this is a new page to render. If so,
          pageStartY and pageEndY are reset.
    VII. To match the coordinates of the printable clip of graphics2D and the
          allocation rectangle which will be used to lay out the views,
          graphics2D is translated to begin at the printable X and Y
          coordinates of the graphics clip.
    VIII. An allocation Rectangle is created to represent the layout of the
          Views.
          The Printable Interface always prints the area indexed by reference
          to the Graphics object. For instance, with a standard 8.5 x 11 inch
          page with 1 inch margins the rectangle X = 72, Y = 72, Width = 468,
          and Height = 648, the area 72, 72, 468, 648 will be painted regardless
          of which page is actually being printed.
          To align the allocation Rectangle with the graphics2D object two
          things are done. The first step is to translate the X and Y
          coordinates of the graphics2D object to begin at the X and Y
          coordinates of the printable clip, see step VII. Next, when printing
          other than the first page, the allocation rectangle must start laying
          out in coordinates represented by negative numbers. After page one,
          the beginning of the allocation is started at minus the page end of
          the prior page. This moves the part which has already been rendered to
          before the printable clip of the graphics2D object.
    X.    The printView method is called to paint the page. Its return value
          will indicate if a page has been rendered.
    Although public, print should not ordinarily be called by programs other
    than PrinterJob.
public int print(Graphics graphics, PageFormat pageFormat, int pageIndex) {
    double scale = 1.0;
    Graphics2D graphics2D;
    View rootView;
// I
    graphics2D = (Graphics2D) graphics;
    disableDoubleBuffering(jeditorPane);
// II
    jeditorPane.setSize((int) pageFormat.getImageableWidth(),Integer.MAX_VALUE);
    jeditorPane.validate();
// III
    rootView = jeditorPane.getUI().getRootView(jeditorPane);
// IV
    if ((scaleWidthToFit) && (jeditorPane.getMinimumSize().getWidth() >
    pageFormat.getImageableWidth())) {
      scale = pageFormat.getImageableWidth()/
      jeditorPane.getMinimumSize().getWidth();
      graphics2D.scale(scale,scale);
// V
    graphics2D.setClip((int) (pageFormat.getImageableX()/scale),
    (int) (pageFormat.getImageableY()/scale),
    (int) (pageFormat.getImageableWidth()/scale),
    (int) (pageFormat.getImageableHeight()/scale));
// VI
    if (pageIndex > currentPage) {
      currentPage = pageIndex;
      pageStartY += pageEndY;
      pageEndY = graphics2D.getClipBounds().getHeight();
// VII
    graphics2D.translate(graphics2D.getClipBounds().getX(),
    graphics2D.getClipBounds().getY());
// VIII
    Rectangle allocation = new Rectangle(0,
    (int) -pageStartY,
    (int) (jeditorPane.getMinimumSize().getWidth()),
    (int) (jeditorPane.getPreferredSize().getHeight()));
// X
    if (printView(graphics2D,allocation,rootView)) {
      return Printable.PAGE_EXISTS;
    else {
      pageStartY = 0;
      pageEndY = 0;
      currentPage = -1;
      return Printable.NO_SUCH_PAGE;
/** The speed and quality of printing suffers dramatically if
   * any of the containers have double buffering turned on.
   * So this turns if off globally.
   * @see enableDoubleBuffering
public static void disableDoubleBuffering(Component c) {
    RepaintManager currentManager = RepaintManager.currentManager(c);
    currentManager.setDoubleBufferingEnabled(false);
/** Re-enables double buffering globally. */
public static void enableDoubleBuffering(Component c) {
    RepaintManager currentManager = RepaintManager.currentManager(c);
    currentManager.setDoubleBufferingEnabled(true);
/* print(HTMLDocument) is called to set an HTMLDocument for printing.
public void print(HTMLDocument htmlDocument) {
    setDocument(htmlDocument);
    printDialog();
/* print(JEditorPane) prints a Document contained within a JEDitorPane.
public void print(JEditorPane jedPane) {
    setDocument(jedPane);
    printDialog();
/* print(PlainDocument) is called to set a PlainDocument for printing.
public void print(PlainDocument plainDocument) {
    setDocument(plainDocument);
    printDialog();
/* A protected method, printDialog(), displays the print dialog and initiates
    printing in response to user input.
protected void printDialog() {
    if (pJob.printDialog()) {
      pJob.setPrintable(this,pFormat);
      try {
        pJob.print();
      catch (PrinterException printerException) {
        pageStartY = 0;
        pageEndY = 0;
        currentPage = -1;
        System.out.println("Error Printing Document");
/* printView is a recursive method which iterates through the tree structure
    of the view sent to it. If the view sent to printView is a branch view,
    that is one with children, the method calls itself on each of these
    children. If the view is a leaf view, that is a view without children which
    represents an actual piece of text to be painted, printView attempts to
    render the view to the Graphics2D object.
    I.    When any view starts after the beginning of the current printable
          page, this means that there are pages to print and the method sets
          pageExists to true.
    II.   When a leaf view is taller than the printable area of a page, it
          cannot, of course, be broken down to fit a single page. Such a View
          will be printed whenever it intersects with the Graphics2D clip.
    III. If a leaf view intersects the printable area of the graphics clip and
          fits vertically within the printable area, it will be rendered.
    IV.   If a leaf view does not exceed the printable area of a page but does
          not fit vertically within the Graphics2D clip of the current page, the
          method records that this page should end at the start of the view.
          This information is stored in pageEndY.
protected boolean printView(Graphics2D graphics2D, Shape allocation,
View view) {
    boolean pageExists = false;
    Rectangle clipRectangle = graphics2D.getClipBounds();
    Shape childAllocation;
    View childView;
    if (view.getViewCount() > 0 &&
          !view.getElement().getName().equalsIgnoreCase("td")) {
      for (int i = 0; i < view.getViewCount(); i++) {
        childAllocation = view.getChildAllocation(i,allocation);
        if (childAllocation != null) {
          childView = view.getView(i);
          if (printView(graphics2D,childAllocation,childView)) {
            pageExists = true;
    } else {
// I
      if (allocation.getBounds().getMaxY() >= clipRectangle.getY()) {
        pageExists = true;
// II
        if ((allocation.getBounds().getHeight() > clipRectangle.getHeight()) &&
        (allocation.intersects(clipRectangle))) {
          view.paint(graphics2D,allocation);
        } else {
// III
          if (allocation.getBounds().getY() >= clipRectangle.getY()) {
            if (allocation.getBounds().getMaxY() <= clipRectangle.getMaxY()) {
              view.paint(graphics2D,allocation);
            } else {
// IV
              if (allocation.getBounds().getY() < pageEndY) {
                pageEndY = allocation.getBounds().getY();
    return pageExists;
/* Method to set the content type the JEditorPane.
protected void setContentType(String type) {
    jeditorPane.setContentType(type);
/* Method to set an HTMLDocument as the Document to print.
public void setDocument(HTMLDocument htmlDocument) {
    jeditorPane = new JEditorPane();
    setDocument("text/html",htmlDocument);
/* Method to set the Document to print as the one contained in a JEditorPane.
    This method is useful when Java does not provide direct access to a
    particular Document type, such as a Rich Text Format document. With this
    method such a document can be sent to the DocumentRenderer class enclosed
    in a JEditorPane.
public void setDocument(JEditorPane jedPane) {
    jeditorPane = new JEditorPane();
    setDocument(jedPane.getContentType(),jedPane.getDocument());
/* Method to set a PlainDocument as the Document to print.
public void setDocument(PlainDocument plainDocument) {
    jeditorPane = new JEditorPane();
    setDocument("text/plain",plainDocument);
/* Method to set the content type and document of the JEditorPane.
protected void setDocument(String type, Document document) {
    setContentType(type);
    jeditorPane.setDocument(document);
/* Method to set the current choice of the width scaling option.
public void setScaleWidthToFit(boolean scaleWidth) {
    scaleWidthToFit = scaleWidth;
}The sample input file is "mark.html":::
<html>
<head>
<style type="text/css">

</style>
</head>
<body>
<p style="margin-top: 0">
</p>
<table width="500" cellspacing="20" border="1">
<tr>
<td height="330" valign="top">
<table border="0">
<tr>
<td>
<font size="2">This is to certify that [[Client Name]], born
on [[Client Date of Birth]], of [[Client Residential
                Address]], was the holder of motor vehicle driver
licence number [[Client Licence Number]], first issued on
[[First Issue Date of Holding]] and expired on [[Holding
                Expiry Date]].<br></font>
</td>
</tr>
</table>
</td>
</tr>
</table>
<table width="500" border="2">
<tr>
<td>
<table width="480" border="0">
<tr>
<td align="right">
<font size="2"><br>
<b>Fred Flintstone<br>Manager</b><br>Records Services Division<br>State
Police<br>An authorised person for the purposes of the
Road Act 1986</font>
</td>
</tr>
<tr>
<td align="left">
<font size="2"><b>User ID: wzvqv7<br>Dated: 29 November 2006</b>
</font>
</td>
</tr>
</table>
</td>
</tr>
</table>
</body>
</html>

I have finally cracked it!!!!!!!!!!!!!!!!
The issue is definitely with Java Sun. "Uneven character spacing when printing JTextComponent"
It is raised on the http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6488219
And currently in OPEN state, and raised on 31 Oct 2006 and mentions it was caused by fix 4352983.
So where do we go from here. It's not good because I have tried all later version of the JVM and the issue is still there.
Why? Because it hasn't been fixed yet. Read the bug report above, as it gives more insight -- and mentions the workaround is NOT good for existing code.
So the way forward is to use an earlier version of the JVM 5.
I download the JVM version 1.5.0 (starting version) and works Ok... I would probably think version prior to 4352983 would be Ok too.
Please vote for this.... We have a workaround (use older version of the JVM).
So I am very happy.

Help With HP Network Printer

Hello,
Just got my new Imac 21" and it is awesome. Issue I am having is that it is replacing a Windows PC that had a wired network printer attached and worked fine. Printer is a HP All In One 6100C. I can ping the printer ip, I can also bring up the printer in a browser with ip. But when I go to add the printer, I enter the IP address, and it comes back as not seeing the printer? I have tried protocol Line Printer and IPP? I must be missing something. Any help would be appreciated.
Thanks JR

So is the printer attached directly to your iMac, or is it attached to a router? Mine is attached to the Mac with USB and then shared with the other computers in the house over the LAN. Works great.
Dah•veed

Help with hooking up printer

I have an old HP Desktop HP Compaq dc7900 computer. I just purchased a HP 1010 deskjet printer. The printer cord I have is not compatablile with this printer. Can this printer be connected to this computer? I am not very good with these issues and before I give up I was hoping someone might be able to help me with this problem. Should I just returnt he printer? Let me know. Thanks, PJ11397
This question was solved.
View Solution.

The dc7900 CMT (as shown here) has Serial (2, 1 optional), parallel (optional), eSATA (optional), USB 2.0 (8), USB 2.0, internal on system board (2), RJ-45, front and rear audio jacks (2 each), PS/2 ports (2), VGA connector. The Hp1010 is USB. All you need is a USB cable (as shown here) for $1.99
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Help with setting up printer - works fine on windows!

Hi
Firstly any help is much appreciated!
I have an AirPort Express Station with a HP Deskjet D2360 attached to the USB port.
I have 3 Windows XP Printers that all print fine.
My PowerBook, with Leopard, can located and install the Bonjour printer (using the drivers that came with Leopard). However when I print a document it appears in the printers job list then says it is complete. However the printer does nothing. I've attached the printer directly to my PowerBook and it works fine with the pre-installed drivers. The airtunes function of the airport also works fine from the PowerBook.
Thanks again
Chris

CORRECTION TO THE ABOVE
Hi
Firstly any help is much appreciated!
I have an AirPort Express Station with a HP Deskjet D2360 attached to the USB port.
I have 3 Windows XP Laptops that all print fine.
My PowerBook, with Leopard, can located and install the Bonjour printer (using the drivers that came with Leopard). However when I print a document it appears in the printers job list then says it is complete. However the printer does nothing. I've attached the printer directly to my PowerBook and it works fine with the pre-installed drivers. The airtunes function of the airport also works fine from the PowerBook.
Thanks again
Chris

Help with Zebra Label Printer and Multi Order Shipping Tool- Partial Label Printing

I have a zebra gx420d which is compatible the zebra 2844 (its the new model) and I am having a hard time printing labels with the multi order shipping tool. I have the correct driver, the printer test page works fine, and everything is configured for a 4x6 label.
I have set the selling preferences in paypal to match the zebra 2844 printer and within the mult order tool, I have edited the settings to also match zebra 2844.
My problem is that regardless of what or how I do it, my printer will only print a 1/4 of the label. It is not shrinking the label, it is starting to print at the correct size but stops 1/4 of the way through. Almost like it thinks my label size is too small but as i mentioned, I confirmed 4x6 on the label settings at both printer properties and printer preferences. I spent and hour on tech support with zebra and they confirmed the printer is working as it is supposed to. I also know this because my Amazon labels print correctly as well. Its only paypal and ebay labels that are not working. Very frustrating. Can anyone help?

Hi,
did you upload the desgin in a standard text with option ITF? This you can copy then to the layoutset. At least this is the way of working with BARONE.
Cheers,
Stefan

Need some help with orientation when Printing Tickets

Hi Guys,
We use an online ticketing system which when clicked on "print ticket" Safari window comes up showing the ticket as a PDF. You move the mouse to the bottom of the page, where adobe reader icon bar appears so you can print.
Now currently when the ticket comes up, The ticket is shown horizontally and the part you would normally tear off (stub) is on the left hand side, However when we go to print, because the ticketing paper is setup as the stubs first then the rest of the ticket, this orientation has the ticket being printer first then the ticket stubb, which is the opposite to the way the paper in the printer is, causing the ticket to be printed incorectly. If I was to rotate the image twice, so that the text appears upside down, with the stub on the right side, and print the ticket it prints correctly, since the stubb is printed first and matches the paper.
Is there a way to have the ticket appear as it is now so you can read it on the preview but flip the pdf 180 degrees up side down, so the stub is on the right side, and gets printed first, before it goes to the printer.
Forgive me but I have looked and haven`t found, any setting that work. I have tried the flip horizontally option as well as the reverse page orientation, which hasen`t fixed the problem.
I want to be able to get the orientation, correct and be able to save as default, the settings so its a simple click print, type of operation, without having to readjust it everytime.
It is important that I get this orientation correct, as it affects the print stubs, and ticket.
also keep in this on Mac's as well, and my layout direction option is greyed out.
Hopefully that makes sense.
Any help is greatly apreciated, as I do need to get this problem resolved fairly soon, as our box office is getting buys.
Thanks,
soundguy

soundguy911 wrote:
Is there a way to have the ticket appear as it is now so you can read it on the preview but flip the pdf 180 degrees up side down, so the stub is on the right side, and gets printed first, before it goes to the printer.
If you "flip" the PDF, any text on the document will be mirrored; you will need to rotate it.
One method I can imagine is to use JavaScript to rotate the PDF, but I'm not sure that this function actually exists. Check for yourself: http://www.adobe.com/content/dam/Adobe/en/devnet/acrobat/pdfs/js_api_reference.pdf
Note that if you build a "rotate" JS into Adobe Reader, every PDF document that is opened will appear rotated.

Help with Aperture 3 printing to Epson R1800 please

No I haven't got the wrong forum, I think I will get the best answer here. I am a fully paid up member of the Lightroom 2 club and like to use both as I am sure others here do.
I cannot get a good print from Aperture 3, there is always a slight magenta colour cast. Prints from Lightroom and CS4 are perfect! And yes all settings are correct, I am not a beginer at this. This is with custom Permajet paper profiles and with Colormunki profiles. And as I have said prints from Lightroom and CS4 using a digital dog test print are spot on.
I remember back in earlier versions of Lightroom printing to the R1800 was problematic and the only way to get round this was to go into the ColorSync Utility and and under Devices and then the default Epson Media type, change the Current Profile to the paper profile that you wished to use. It now seems that this is also the only solution for A3. Doing this will give me an identical print to LR and CS4.
Now was this a problem with Lightroom or the R1800 driver? I am using the latest driver V6.23. Also I am using Aperture 3.0.2 and OSX 10.6.3.
I would be grateful for any help.

Hi Ian,
I am glad to hear you're getting good prints from LR and CS4. I am not aware of any outstanding issues with print color management in Lightroom (the print path is pretty solid and conforms to the OS requirements, and will perform correctly as long as the driver also conforms to the OS requirements; many recent drivers do, some older ones do not).
FYI, I understand you feel that there are forum participants here who may be able to help answer your question with Aperture. Though that may indeed be the case, that does not make it an appropriate use of this forum. (As an analogy, many forum participants here are also well-qualified to answer Photoshop questions, but Photoshop questions should be directed to the Photoshop forum, instead of here.)
Eric

Please help with newline non-printing character in JTextPane.

Hi.
I need to implement "View non-printing characters" feature in my JTextPane.
So when this feature is toggled, the newline character is displayed at the end of every line like in Microsot Word editor.
I been digging around for few hours now and I cant find a solution for this.
Please help me with any tips guys.

StanislavL:
ok i digged around and i found code example... i got my code to show "X" at the end of every line as a newline character. here is code I used:
import javax.swing.text.StyledEditorKit;
import javax.swing.text.ViewFactory;
import javax.swing.text.Element;
import javax.swing.text.View;
import javax.swing.text.AbstractDocument;
import javax.swing.text.LabelView;
import javax.swing.text.IconView;
import javax.swing.text.StyleConstants;
import javax.swing.text.ComponentView;
import javax.swing.text.BoxView;
import java.awt.Graphics;
import java.awt.Shape;
import java.awt.Rectangle;
class MyEditorKit extends StyledEditorKit
     public ViewFactory getViewFactory()
          return new MyRTFViewFactory();
class MyRTFViewFactory implements ViewFactory
     public View create(Element elem)
          String kind = elem.getName();
          if (kind != null)
               if (kind.equals(AbstractDocument.ContentElementName)) {
          return new LabelView(elem);
               } else if (kind.equals(AbstractDocument.ParagraphElementName)) {
//              return new ParagraphView(elem);
                    return new MyParagraphView(elem);
               } else if (kind.equals(AbstractDocument.SectionElementName)) {
//              return new BoxView(elem, View.Y_AXIS);
                    return new MySectionView(elem, View.Y_AXIS);
               } else if (kind.equals(StyleConstants.ComponentElementName)) {
                    return new ComponentView(elem);
               } else if (kind.equals(StyleConstants.IconElementName)) {
                    return new IconView(elem);
               // default to text display
               return new LabelView(elem);
class MySectionView extends BoxView {
     public MySectionView(Element e, int axis)
          super(e,axis);
     public void paintChild(Graphics g,Rectangle r,int n) {
          if (n>0) {
               MyParagraphView child=(MyParagraphView)this.getView(n-1);
               int shift=child.shift+child.childCount;
               MyParagraphView current=(MyParagraphView)this.getView(n);
               current.shift=shift;
          super.paintChild(g,r,n);
class MyParagraphView extends javax.swing.text.ParagraphView
     public int childCount;
     public int shift=0;
     public MyParagraphView(Element e)
          super(e);
          short top=0;
          short left=20;
          short bottom=0;
          short right=0;
          this.setInsets(top,left,bottom,right);
     public void paint(Graphics g, Shape a)
          childCount=this.getViewCount();
          super.paint (g,a);
          int rowCountInThisParagraph=this.getViewCount(); //<----- YOU HAVE REAL ROW COUNT FOR ONE PARAGRAPH}
          System.err.println(rowCountInThisParagraph);
     public void paintChild(Graphics g,Rectangle r,int n) {
          super.paintChild(g,r,n);
          //g.drawString(Integer.toString(shift+n+1),r.x-20,r.y+r.height-3); // line number
          g.drawString("X",r.x+r.width,r.y+r.height-3);
}this line here draws "X":
g.drawString("X",r.x+r.width,r.y+r.height-3);How would I modify this to draw a small picture there?
Thanx a lot.

Help with a smart object

While I'm in ps cs5 and have converted a layer to a smart object, when I click/double click on the layer or the icon it will not open into camera raw. I have tried this with jpgs, tiffs and psd files, I have no other problems with raw, bridge of photoshop. I have also downloaded the latest patch from Adobe, any help would be appreciated/

Um, the function of Smart Objects isn't to invoke Camera Raw, in general.
You only get that behavior if you open a raw conversion as a Smart Object, in which case the Camera Raw plug-in embeds the raw file in the Smart Object layer in the document. Specifically because it has done that and is a "raw file smart object" it knows to go back to Camera Raw when you double-click it.
-Noel

Help with hp smart print

Similar Messages

Maybe you are looking for