Help with I-Trigue 3400

hello, i have the I-Trigue 3400 and my volume controller was all messed up and now it's actually completely broken and i would like to purchase a replacement somewhere. how does one go about doing this?

Hi,
If you haven't done so, try to get in touch with Support to check on the availability of the item.
Good luck.

Similar Messages

  • Problem with I-Trigue 3400 (static)! Please help!

    Alright, I bought my first set of I-Trigue 3400s about 2 weeks ago. Less than a few hours after using them, static started to come through the right speaker. This would happen intermittently for the next 2 days before I decided to exchange them. I was told it must of been a manufacturing defect and not to worry.
    Well, I got a 2nd set of the I-Trigues to replace my first set. Everything has been swell for the past 2 weeks until last night. Last night and today I am once again getting static over my speakers. I tried fiddeling with the wires thinking it might be a loose connection and I also tried shutting off my computer and any nearby electronic devices. Unfortunately, none of my attempts have resolved the issue. This time the static is coming out of both speakers, although it is really bad and loud with the right speaker. I tried switching the left/right plugs around for the speakers, and this just made the louder static come out of the left speaker instead of the right one..
    PLEASE HELP! My speakers haven't even lasted me two weeks!! And this is the 2nd set of 3400s I buy!!!!
    btw, I've already sent for my rebate, so I don't think I can exchange my speakers for the THIRD time!

    Hey! I've got the same problem with the same kind of speakers! When im listening to something volume is coming down and after a some time its coming back to its previous level! Coming back to its normal level can be forced by turning the speakers on and off! thats all i've discovered...
    i also heard that some of creative speakers have kind of (f**k i dont know the word in english :P ) which works like that: when subwoofer is hot it automatially turns the volume lower to save your speakers from burning form hot :P or something like this :P
    hmm... what i discovered that is no matter what i connect as source of music! effect of volume is the same
    or maby you discovered the reason of this?
    ps.
    sory for my very unperfect english...

  • I-trigue 3400 soundwoofer not working / right speaker low output compare with left speaker

    Hi, basically i have 3 sets of creative i-trigue 3400 purchase as second hand. All these 3 sets have some minor problem. I trust my ability i able to repair it as iam a professional electronic engineer. Just need some advance information or guidance from creative big brother and sister.
    i do check with the controller everything, because i have 3 sets so i able to verified the problem.
    1)subwoofer not output----Is it problem with amplifier or any transistor damage? How do i start checking and verified it?
    2)right speaker low output compare with left speaker----I already analysis it and would like to know is it the transistor prolem? Please let me know so i can start with my repairing.
    From what i know, this model seem like going to discord soon, so is it possible send me a partial schematic on the 3400 so i can repair. Please let me know and reply me, i am waiting your answer. Thank you

    seem like nobody reply my email, can creative technical provide some guide. I already mention i will repair myself.:angry:

  • Any solution to resurrect the audio I-Trigue 3400

    Hello friends, for those who know the creative teams of 2.1, I have come to the terrible conclusion that I can not do anything to buy or fix the remote control of my sound system 2.1 I-Trigue 3400. For a long time it broke. But I think it's a shame to throw away the subwoofer and two speakers given the short time of use they have.
    I wanted to know if anyone can advise me with any alternative to make sound again.
    I've thought about the possibility of canceling the system remote control... some cable splicing inside the subwoofer or using a cable that closes the circuit to jump utilities remote control (on / off, volume, bass)So just control the volume from the computer and turn on or off just by disconnecting the plug from the wall. Is this possible?. Has anyone done something similar?
    I hope you can help me. It's a shame to waste a stereo that cost money saved while.
    Thank you very much!

    I have no personal experience on tinkering the volume control pod but if you really want to, you may want to consider bringing the speaker to an electronic shop or if you have knowledge in electronics, you can do it yourself. You can try searching spares on ebay or other third party stores for the volume control pod. I tried googling Itrigue 3400 control pod and found one in ebay (you may want to check it out yourself).
    By the way, is your pod: a.) literally broken, b.) no volume at all or c.) volume is erratic? If it's the case of b or c, I was thinking just maybe, it could be a "dirt" issue on the control pod. Overtime, dust gets accumulated on this part (rotating controller) which most of the time is the cause of erratic volume or no volume. You can try opening the control pod's back cover and put some alcohol on it and slowly slide the resistor up and down. See if this helps.

  • Creative I-Trigue 3400 Spares

    Hi,
    I have owned the speakers Creative I-Trigue 3400 for a few years now, they do the job fine. However recently the Wired remote control with bass level control has broke, I do not really want to replace these speakers as I think they are great, I do not want to buy the whole package again becuse the subwoofer and speakers are still in good condition.
    Therefore I was wandering if there is a place where I can buy spare parts for it's Or any other user which has spares for this item. (I am in the UK) I have tried e-bay but with no luck.
    Any help would be appreciated.
    Thanks
    Nas

    I have the same question. I compare the 3500 to several other systems and found it to be superior. I did not test against the 3400, which is a different design concept. I tested against the 3300 which I did not like at all.

  • I-trigue 3400 pc connect

    my subsystem i-trigue 3400 don't play anything when connected to my PC. i strictly refer to the technical support leaflet to install it. using it with the zen micro is a gorgeous play. may help me?

    yiapipi,
    If the speaker works with the MP3 player but not with the computer, then the most likely problem should be with the computer sound card. You could try updating the sound card driver.
    Jason

  • Help with Reconnecting Files

    Over this past weekend I was moving, via Relocate Masters, large numbers of images from managed status on my MacBook Pro to referenced status on an external drive (an Air Disk, to be precise). This had gone fine for thousands of images, but Sunday night I returned to the computer to find that it was completely locked up in mid-Relocate, and seemed to have been locked up for a while. I'm not sure what happened, but it seemed bad -- I couldn't get to the Force Quit dialog, or anywhere else. I powered down by holding in the power button.
    Upon resurrecting things, Aperture would not open the library. Long story shorter, I rebuilt the database and was then able to see the library contents again. But then I noticed that many files were "offline." Digging further, and using the Manage Referenced Files box, I discovered that some 3500 files need to be reconnected.
    The Reconnect All button did a little bit of magic for me, but now I've gotten to a point where using Reconnect All only reconnects one file at a time. I was renaming files as I Relocated Masters, and my fear is that this is what has caused the disconnect. *So first,* can anyone tell me that this is what has caused the problem (the problem being my apparent need to now reconnect 3400 files, one-by-one)?
    *Second, and more importantly to me, do I have any recourse beyond reconnecting one-by-one?* Again, the problem seems to me to be that the library file expects a file named image.jpg (or whatever), because the change of the file name to greatimage.jpg that occurred during Relocation did not get written to the library file.
    Many thanks for all help and suggestions.

    Homme dArs wrote:
    I hope someone else can join in with a definitive answer to your problem, but I don't believe you will be happy using the configuration you are attempting to set up.
    Having Aperture access your images via wireless is going to be very very slow, and any connection problems will be very frustrating. I have even abandoned the idea of using wireless backup of image files because it so slow.
    Perhaps someone can help with your immediate problem, but I would strongly suggest you find a way to store your referenced files locally (a firewire drive would be ideal).
    Thanks. I certainly appreciate your thought, and before trying it myself, my instinct was the same as yours. That said, until the present problem cropped up, I have to say it has been quite a good solution. My network is 802.11n, and I've noticed no real lag in accessing the files or otherwise using Aperture with a library stored as this is.
    But yes, I hope someone is able to help me get these 3400-some files reconnected short of one-by-one.
    Thank you for your comments.

  • I-Trigue 3400 Price?

    Hello, Im here to enquire about the actual price of the I-Trigue 3400 as I am interested in purchasing them, the website states ?70 but them you have the 3400 series + Free MP3 Player for only 60, anyone else see the problem?

    Simusic,
    Creative Labs is based in Singapore, so I don't think there is a problem. I am not aware of any knock-off's of this particular product. If you are still concerned, I would recommend contact support to register your product and serial number. If there is any problem with it, they can notify you.
    http://www.creative.com/corporate/about/
    Daniel

  • I-Trigue 3400 static problem..

    It's been only 4 months max since I've been using these speakers, and all of a sudden
    starting yesterday, static sounds appeared.
    I've tried plugging it out and waiting.. It was ok for a while.. but static returned.
    It is NOT my computer, since when I use my head phones or another speaker, no static can be heard.
    Also, if I turn the volume way- higher than my usual (almost to the max) the static disappears.
    What is wrong with my speakers? It is in warrenty so there is no problem getting an exchange, but
    I'd like to know if there's any way to fix it. If not, I'll get an exchange.

    I got the crappy same Problem!
    I plugged in my new Sennheiser HD590 (my 2nd Pair) into the Remote Control of the I-Trigue 3400. And i wondered of hearing these (static?) anoying tickling in the phones.
    I thought it could may be my Sennheiser Headphones, but i wondered cause I got the I-Trigue 3400 since January and until yet it worked fine.
    So I tried my old Sennheiser HD590 - same prob. I tried the Sennheiser MX500 (In-Ear-Phones) - same prob. I tried my Plantronics Audio .90 - same prob.
    Then I plugged in the Headphones directly into my Audigy 2 ZS - no (static?) tickling sounds anymore. I tried and experimented until yet 3 days now - un-/installing drivers - unplugging etc. - nothing worked.
    Please Support and tell me what is happening to my I-Trigue 3400 - I am using Creative Products for right over 8 Years now and i haven't got disappointed until yet. Go ahead!

  • Help with mic problems please!

    Currently I have a Sound Blaster Audigy2 ZS sound card with I-Trigue L3500 speakers. I have had this system for a bit now and have never needed to use a mic till recently.
    The system has a wired volume/bass control that plugs directly into the sub. It works fine but when I plug a headset into it I can hear sounds fine but can't use the mic function. The controller is clearly marked with 2 stereo mini plugs that seem to be labled with the uni'versal headphone/mic symbol and it seems so dummy proof, guess it isn't?
    I'm using a Labtec headset, not the greatest one, but one that sold for about $25 at Best Buy which I guess makes it a mid level one at best.
    Please any help that you can give me would be greatly appreciated!!!

    i have the same problem. i am using an audigy 2 zs soundcard with a t7700 speaker system. i'd like to connect my mic to the volume control unit (because there is a microphone jack) ... but i am wondering why there is no cable connecting the subwoofer with any microphone jack on the sound card.
    this brings me to to following question:
    FOR WHAT PURPOSE IS THE MICROPHONE JACK ON THE VOLUME CONTROL UNIT?

  • I-Trigue 3400 + Muvo 128mb

    Hi, you have the Creative I-Trigue 3400 + Free Muvo 128 mb MP3 player on at 60, could anyone tell me if the MP3 player is suitable for the UK as it says on the order screen French/Dutch.

    ChrisN,
    Yes it should be fine using in UK since the player does not have any specific adaptor or items to use with. It uses AAA battery and USB and both of these is not country bound. If there's any doubt on this, I would suggest contacting online store and confirm this with them.
    Jason

  • Weird i-trigue 3400

    Hello everyone,
    I had purchased the i-trigue 3400 but exchanged it because it had a volume fluctuation problem.
    (It would go up and down by itself... tested with multiple sources to make sure it wasn't a
    sound card issue)
    The new set I've got is different than the original one, and any other I've seen pictures of. The
    hole for the subwoofer is on the top circle not bottom. The power cable doesn't have the power
    supply at the end where it plugs into the wall. It's just a small plug. Anyone know what this is
    all about? It's the first one I've seen this way, and am concerned.
    Was this an earlier revision that creative pulled off the shelves and I somehow got a freak one left
    over at circuit city?
    Thanks

    I just purchased one of these at Circuit City as well today. Does the same random volume change. Quite annoying to say the least.

  • I-trigue 3400 question

    What is the difference between the I-trigue 3400 and the i-trigue 3400 zen micro edition?

    the_poet677,
    Is there a special edition I-Trigue 3400 for Zen Micro? Where did you saw this? Perhaps a link from you? Most likely, which I believe is that the I-Trigue 3400 are bundled together with the Zen Micro player and sold together but as far as I know, there isn't any special edition of I-Trigue 3400.
    Jason

  • I-Trigue 3400 Volume control Unit replacement

    I need to order an I-Trigue 3400 "volume control unit". Where can I find one ?
    Regards,
    S.S.

    As far as I know:
    1) If you have speakers with still valid warranty, you can try to contact Creative Support and probably they'll send you a new remote control. You'll have to write them first, though, and send them the serial number of the speakers. Check the 'Support' section on this site.
    2) If warranty has expired, nothing can be done. Creative will not send/sell you a new remote control, even if they have one in reserve. You can try ebay, or you can throw the speakers away...
    I recently contacted Creative Support. I asked them if I can buy a new satellite and/or a new remote control for a quite expensive Creative Megaworks 250D 2.1 THX set. They refused, because speakers are out of warranty period, and they don't sell spare parts for speakers which are out of warranty... :-(
    Message Edited by lefou on 05-05-2009 07:18 PM

  • I-Trigue 3400 original?

    i bought the creative I-Trigue 3400 in italy but i seen "made in china" written in the box near the serial code. It would not have to be written "made in usa"? How can i check the authenticity of the product?

    Simusic,
    Creative Labs is based in Singapore, so I don't think there is a problem. I am not aware of any knock-off's of this particular product. If you are still concerned, I would recommend contact support to register your product and serial number. If there is any problem with it, they can notify you.
    http://www.creative.com/corporate/about/
    Daniel

Maybe you are looking for