Help with Imac G3

I recently purchased a 400MHz 64mb 10GB Imac G3 off of ebay. It doesn't have any operating system on it. I keep reading about it needing firmware updates before OS X being put on it, but since i don't have an operating system on it currently, i can't do that. What should I do?

Your Mac can only run upto OSX Panther (previous version). ... If you want to install OSX Tiger (newest version off Mac OS) then you need to use XPostFacto...
Sorry but this is incorrect. The iMac 400 MHz has FireWire and is completely supported by Apple to run Tiger. XPostFacto is not needed.
To install OSX there is no Firmware update needed.
This information is also somewhat incorrect. See "iMac (Slot Loading): Install iMac Firmware 4.1.9 Before Mac OS X 10.2 or later".
You can update the Firmware after you installed. But this is also not needed.
This is incorrect. (a) To update the firmware, OS 9 must be installed on the hard drive and the iMac must be booted from OS 9. (b) Running OS 10.2 and later without the firmware update can cause loss of video and quite a struggle to get the firmware installed and the iMac working once again.

Similar Messages

  • Need help with iMac OSX backup

    Hi,
    I currently have a mac book air running osx 10.8.
    And i recently purchased a imac running osx 10.8.
    I need help with the backup feature between my imac and macbook air.
    I work with excel files a lot, using Microsoft office for mac.
    so basically what i want is to have a 2 way backup between my imac and macbok air.
    That is, when i make any changes, create or delete a file in either of the system, i want the other system to make the change automatically.
    For example when i make changes to a spreadsheet (excel file) on my imac, i want the same to be updated automatically on my macbook air, and vice versa.
    I want both the machines to have the same files, updating the files as they get modified. or deleting if its deleted on any one of the system. Like a 2 way sync.
    Kindly let me know if theres any way to do this.  or something similar that can help me, like i mainly require the excel spreadsheets to be updated, system files, other libraries are not important. 
    I can also put all my files in a single folder if thats required.
    Ps. Both the machines are connected on the same network, and i can also hook a external drive for the backup purpose if required.
    I searched google for softwares and couldnt find the appropriate ones.
    Any help would be appreciated.
    Let me know if you require any more info on this.
    Thanks
    Gaurav.
    <Email Edited by Host>

    rkaufmann87 wrote:
    They don't even need to do that, the can create a dropbox account that woudl achieve the same result. Very simple, reliable and free up to 2GB of storage.
    A few weeks after I installed Dropbox (when it first came out) I got an increase of space for a total of 5GB FREE!

  • Need help with iMac intel desktop - Mac mail consistently going OFFLINE

    I need help with Mac mail - it is frequently going "offline" and requesting me to "take all accounts online". My internet is working. It's been checked, checked and checked. Sometimes it just takes a reboot of the system and the modem to kick it in and make the little triangle symbol go away, but should I have to reboot daily? I have the Mac OS X Lion 10.7.5 installed. Is there a bug here or am I supposed to upgrade to Mavericks? Any help is most appreciated.

    For me this is an issue caused by my email service provider.  When they are slow to respond or to accept the password Mail takes that as a password rejection, and prompts me to reenter password, and eventually goes offline.

  • I need help with imac g4 flat panel download of leopard it tells me it cannot load on the system.

    i bought a refurbished imac g4 flat panel. it is supposed to have an os but it only comes up with a question mark. I put leopard in and it tells me it cannot load on this compuert. system is 800mhz and 60g hd and 768ram.   i have tried to do a fix through the utility and it says it does not exit and kicks me out.  ANY HELP IS A PLUS.

    Try holding down the option key then power on. This brings up the startup manager. Click on your hd. Click on right arrow key.
    Sometimes if volumes don't appear in Startup Manager (what you get when you hold down the Option key at startup), you need to reset the Mac's PRAM, NVRAM, and Open Firmware. Shut down the Mac, then power it up, and before the screen lights up, quickly hold down the Command, Option, P, and R keys, until the Mac has chimed twice more after the powerup chime. Then, before the screen lights up, hold down Command-Option-O-F until the Open Firmware screen appears. Then enter these lines, pressing Return after each one:
    reset-nvram
    set-defaults
    reset-all
    "The reset-all command should restart your Mac. If so, you have successfully reset the Open Firmware settings."
    http://support.apple.com/kb/TS1812?viewlocale=en_US
    You have got get in open firmware to hack the mhz to be higher for the install.  That is change what the machine reports as the mhz to be a higher number.  Details:
    http://lowendmac.com/osx/leopard/openfirmware.html
    http://lowendmac.com/osx/leopard/unsupported.html
    This works on Tiger but I assume it would work on Leoard.
    Macintosh-HD -> Applications -> Utilities -> Terminal
    From: san francisco,ca
    Registered: Apr 27, 2007
    Re: Do the widgets drain system resources and power?
    Posted: Apr 28, 2007 2:51 PM
    I tend to think dashboard is neat, but not neccesary for my everyday workflow.
    it is possible to enable and disable it as needed,
    by entering the following commands into the terminal:
    -- To turn Dashboard off:
    defaults write com.apple.dashboard mcx-disabled -boolean YES
    -- To turn Dashboard on:
    defaults write com.apple.dashboard mcx-disabled -boolean NO
    -- You have to restart the Dock after making either change for it to take effect:
    killall Dock
    Bye Bye Dashbaord
    http://www.kainjow.com/kermitsoft/downloads.html
    Disable Spotlight, Bonjour and Dashboard:
    http://discussions.apple.com/message.jspa?messageID=8749558#8749558
    Robert

  • Need Help with iMac 350 - Won't boot - keyboard or mouse not working!

    Hello,
    I've scoured the web looking for answers, and can't find any, so maybe someone here would be kind enough to help. I'm working on an imac 350 blueberry for my sister and I'm having all sorts of trouble.
    She bought it last week, it started up (8.6 os) no problem. Powered up and down a few times, then all of a sudden, it won't boot. I'm currently getting blinking folder/happymac/question mark when trying to start up.
    Here's the big problem - the keyboard and mouse do not work now. I've tried three different mice and three keyboards and no dice with any of them. I have the 8.6 CD from her previous imac (bondi), and I can hear it spinning, but there is no way to start up from cd.
    I've also tried 2 other hard drives with the same results.
    Tried resetting CUDA on logic board, taking out battery, no change. Bought new battery- no change.
    I would love to at least get the keyboard working to see if I can even startup from cd, anyone have any clues on how to get it working? The strange thing is that the keyboard has a power on button, and it works to start the thing up, but dies when it tries to boot. Sometimes I just get a grey screen with the pointer icon, and I can move the pointer with the mouse for a second or two, then no response.
    I appreciate any help or suggestions on locating the issues!
    Thank you!

    When I said "but dies when it tries to boot" and "..then no response." I meant that the keyboard works to power up the computer, but won't work for anything else. So, I am figuring that the usb ports are supplying power to the keyboard and mouse, but the usb ports aren't relaying information from the keyboard or mouse.
    How do you know the mouse isn't working? Won't you have to wait until later in the boot to tell?
    The poweron key is a special case. I think that it works by lowering/changing the voltage on one of the usb cables. I read about this somewhere. Anyway, this function was eliminated from later usb keyboards and macs. Maybe a working power button doesn't mean what you think.
    I would love to boot into open firmware
    Could you try powering up from the machine? Is there a power button on the lower right of the machine?
    Have you tried this key combo?
    commandoption+of
    The letters are in lower case. Hold all down then poweron the machine. I'd poweron from the machine as apposed to the keyboard.
    You could try another usb keyboard.
    We actually did boot up the computer several times with it upside down. Not for any reason, except it's become a real PIA to flip it over every two minutes to start it, then take it apart and boot again. When booting either upside down or right side up it shows the same thing - blinking folder w/finder icon and question mark.
    Yes, I agree. You could try removing the clear plastic around the bottom of the machine. At least you will not have to slide in the carriage. Note. The tv portion will still be surrounded by plastic! Don't remove the plastic around the tv!
    Hope I am not interfering with Richard and his comments.
    Richard: Is this the orginal keyboard? When did Apple get rid of the poweron key from the keyboard? My iMac 600 didn't have the key and my iMac 233 does.
    Robert
    Robert

  • Need help with Imac G5 Model A1145 for resetting to factory settings

    Hi - I am new to the Mac world.  I recently inherited an iMac G5 Model A1145.  I am trying to reset the hard drive to factory settings.  It came with no discs whatsoever.  I've tried to push the option button upon restart or command + R but I never get a Disk Utility screen.
    This iMac has no CD drive with it (although I do have a USB CD drive that I could use if necessary).
    Does anyone know how I can reset the hard drive back to factory settings??
    Any help would be greatly appreciated.
    Thank you

    "command + R but I never get a Disk Utility screen.": These old iMacs don't have this feature.
    you'll need a disc. If you don't have any, you'll need to find one: http://www.macworld.com/article/2101301/advice-from-an-apple-tech-how-to-get-old -mac-os-x-install-discs.html

  • Help with iMac G3 PowerPC - 333Mhz

    Somebody gave my nephew an old G3 iMac and I am trying to get it working for him.
    Does NOT have built in firewire, just usb, and no DVD drive only CDR.
    Right now it powers up but does nothing...just the light on the button, no chime, no screen. It did work and now I am afraid I did something to it.
    It had a 6Gig hard drive in it with OS 8.5...I did firmware updates on it to prepare it for OSX and I put a new hard drive in it with OSX 10.3 (I know new hard drive works because I tested it on a similar tower that I have) If I just had the jumper settings wrong would it behave this way? Or should I be getting the folder with the X through it?
    I also switched out 30M SO DIMM card of RAM for 128...it is the right memory.
    Maybe something is just loose after reassemble?
    Can anybody point me in the right direction?

    reset the PMU
    http://mrjcd.com/junk/PMU.jpg
    The tray loading iMac requires the boot partition to be within 8gig. Since there are hidden partition before the first visible partition, people recommend that you make the first visible partition 7.5 gig to 7.9gig. The machines support upto a 128gig Parallel ATA drive.
    Did you set the harddrive to master? Master is a must. Cable select doesn't work. You need to set the hard drive to master mode. There is usually a label on the hard drive that tells you what jumpers you need to set. If you are not sure, give us the name and model number of the hard drive and usually someone will be able to tell you how to set that drive.
    Did you check all of the cables? Put everything back and verify that all works.
    you need to reset the Mac's PRAM, NVRAM, and Open Firmware. Shut down the Mac, then power it up, and before the screen lights up, quickly hold down the Command, Option, P, and R keys, until the Mac has chimed twice more after the powerup chime. Then, before the screen lights up, hold down Command-Option-O-F until the Open Firmware screen appears. Then enter these lines, pressing Return after each one:
    reset-nvram
    set-defaults
    reset-all
    "The reset-all command should restart your Mac. If so, you have successfully reset the Open Firmware settings."
    http://support.apple.com/kb/TS1812?viewlocale=en_US
    How to eject a cd from the internal cd drive:
    eject cd
    List of devices:
    devalias
    List of variables:
    printenv
    Resetting your Mac's PRAM and NVRAM
    http://support.apple.com/kb/HT1379
    ---------------------

  • Help with iMac and external HD..

    Hello there, I am not sure if this is in the right forum, and please do tell me if its not. The question I have is that I have an awful lot of music and video files (in-fact 100GBS) that I want to import into my itunes library. I have 3 External firewire Drives which I believe I could make into a Raid Drive, how ever what if my library gets bigger....can I expand on the Raid drive, to make it bigger as my library gets bigger?
    Thanks so much for any help...!

    Get one 1TB external drive. For use as storage for iTunes, ultra fast data access is not needed, so a less expensive USB 2.0 external drive will work fine, although you can certainly get a FireWire drive if desired. I often see 1TB USB 2.0 external drives on sale. You can check dealmac.com. Note: If you get one that is marketed to the Windows crowd, be sure to reformat it for Mac OS X.
    Using separate external drives as a RAID is possible, but I would not do it. I would not trust a RAID that is connected between drives using FireWire cables. Having three separate enclosures with three separate power connections and power supplies is potentially risky as well.
    Make sure you are backing up all that data to a separate external drive, using Time Machine.

  • Need Help with iMac G4     No Dial Tone

    I am working on a friend's iMac G4 800 Mhz. Has Mac X 10.2.3 OS. Internal Apple 56K V.90 Modem.
    The modem gives error "no dial tone". This just recently started happening for no apparent reason. Tried different phone cable and tested the wall jack for dial tone on a connected phone. All tests OK.
    This modem is "built in". Is this problem fixable? Is it a hardware or a settings issue?
    The only fix I can think of is an external modem, but would like to fix the internal one if possible.
    Any ideas? Any and all advice is appreciated. I'm new to Macs, so I have limited knowledge of the system.
    Thanks,
    Jim
    iMac G4   Mac OS X (10.2.x)  

    Hello,Try going Apple Menu > System Preferences... > Network > Show: Internal Modem > Modem tab > uncheck the wait for dialling tone option.
    Does that solve it?
    mrtotes

  • Need help with iMac crash

    Interval Since Last Panic Report:  226622 sec
    Panics Since Last Report:          2
    Anonymous UUID:                    8FBA4CB2-5151-30FD-DE0D-93B683FB98C2
    Mon Sep  9 13:22:23 2013
    panic(cpu 0 caller 0xffffff80234b8655): Kernel trap at 0xffffff8023861cff, type 14=page fault, registers:
    CR0: 0x0000000080010033, CR2: 0xffffff7da560afe0, CR3: 0x0000000013749028, CR4: 0x00000000000606e0
    RAX: 0xffffff7da560afc0, RBX: 0xffffff803fb48a00, RCX: 0x0000000003610000, RDX: 0xffffff8023abe9c8
    RSP: 0xffffff817b853d58, RBP: 0xffffff817b853d70, RSI: 0xffffff8040c1a5b8, RDI: 0xffffff803fb48a00
    R8:  0x0000000000000001, R9:  0xffffff817b853e98, R10: 0x00000000000010bc, R11: 0x0000000000000206
    R12: 0xffffff8056ce3958, R13: 0xffffff803eaedd00, R14: 0xffffff803fd608f0, R15: 0xffffff8056ce38d8
    RFL: 0x0000000000010286, RIP: 0xffffff8023861cff, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0xffffff7da560afe0, Error code: 0x0000000000000000, Fault CPU: 0x0
    Backtrace (CPU 0), Frame : Return Address
    0xffffff817b8539f0 : 0xffffff802341d626
    0xffffff817b853a60 : 0xffffff80234b8655
    0xffffff817b853c30 : 0xffffff80234ce17d
    0xffffff817b853c50 : 0xffffff8023861cff
    0xffffff817b853d70 : 0xffffff8023498b3b
    0xffffff817b853e80 : 0xffffff8023420b3d
    0xffffff817b853eb0 : 0xffffff8023410448
    0xffffff817b853f00 : 0xffffff802341961b
    0xffffff817b853f70 : 0xffffff80234a6536
    0xffffff817b853fb0 : 0xffffff80234ce9e3
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    12E55
    Kernel version:
    Darwin Kernel Version 12.4.0: Wed May  1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
    Kernel UUID: 896CB1E3-AB79-3DF1-B595-549DFFDF3D36
    Kernel slide:     0x0000000023200000
    Kernel text base: 0xffffff8023400000
    System model name: iMac12,1 (Mac-942B5BF58194151B)
    System uptime in nanoseconds: 16415363712474
    last loaded kext at 35076330317: com.apple.driver.AppleBluetoothHIDKeyboard          170.2 (addr 0xffffff7fa4f41000, size 24576)
    last unloaded kext at 159203583668: com.apple.driver.AppleUSBUHCI          5.2.5 (addr 0xffffff7fa3d61000, size 65536)
    loaded kexts:
    org.virtualbox.kext.VBoxNetAdp          4.2.16
    org.virtualbox.kext.VBoxNetFlt          4.2.16
    org.virtualbox.kext.VBoxUSB          4.2.16
    org.virtualbox.kext.VBoxDrv          4.2.16
    com.apple.driver.AudioAUUC          1.60
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.driver.AGPM          100.12.87
    com.apple.driver.AppleMikeyHIDDriver          122
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleUSBCDCACMData          4.1.23
    com.apple.driver.AppleHDA          2.3.7fc4
    com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.1.4f2
    com.apple.driver.AppleUpstreamUserClient          3.5.10
    com.apple.kext.AMDFramebuffer          8.1.2
    com.apple.driver.AppleSMCLMU          2.0.3d0
    com.apple.driver.AppleMikeyDriver          2.3.7fc4
    com.apple.driver.AppleIntelHD3000Graphics          8.1.2
    com.apple.AMDRadeonAccelerator          1.0.8
    com.apple.driver.AppleSMCPDRC          1.0.0
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.iokit.IOBluetoothSerialManager          4.1.4f2
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.ApplePolicyControl          3.4.5
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.AppleBacklight          170.2.5
    com.apple.driver.AppleMCCSControl          1.1.11
    com.apple.driver.AppleLPC          1.6.0
    com.apple.driver.AppleUSBCDC          4.1.23
    com.apple.driver.AppleIntelSNBGraphicsFB          8.1.2
    com.apple.iokit.SCSITaskUserClient          3.5.5
    com.apple.driver.AppleUSBCardReader          3.1.7
    com.apple.driver.AppleIRController          320.15
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          34
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.3.1
    com.apple.driver.AppleUSBHub          5.5.5
    com.apple.driver.AppleFWOHCI          4.9.6
    com.apple.iokit.AppleBCM5701Ethernet          3.6.1b4
    com.apple.driver.AirPort.Atheros40          600.72.2
    com.apple.driver.AppleAHCIPort          2.5.2
    com.apple.driver.AppleUSBEHCI          5.5.0
    com.apple.driver.AppleEFINVRAM          1.7
    com.apple.driver.AppleACPIButtons          1.7
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.8
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.7
    com.apple.driver.AppleAPIC          1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
    com.apple.nke.applicationfirewall          4.0.39
    com.apple.security.quarantine          2.1
    com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
    com.apple.driver.AppleBluetoothHIDKeyboard          170.2
    com.apple.driver.IOBluetoothHIDDriver          4.1.4f2
    com.apple.driver.AppleHIDKeyboard          170.2
    com.apple.kext.triggers          1.0
    com.apple.driver.DspFuncLib          2.3.7fc4
    com.apple.iokit.IOAudioFamily          1.8.9fc11
    com.apple.kext.OSvKernDSPLib          1.6
    com.apple.driver.AppleUSBCDCACMControl          4.1.23
    com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.1.4f2
    com.apple.iokit.IOAcceleratorFamily          74.5.1
    com.apple.driver.AppleThunderboltEDMSink          1.1.8
    com.apple.driver.AppleThunderboltEDMSource          1.1.8
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.kext.AMD6000Controller          8.1.2
    com.apple.kext.AMDSupport          8.1.2
    com.apple.driver.AppleHDAController          2.3.7fc4
    com.apple.iokit.IOHDAFamily          2.3.7fc4
    com.apple.iokit.IOSurface          86.0.4
    com.apple.iokit.IOSerialFamily          10.0.6
    com.apple.iokit.IOBluetoothFamily          4.1.4f2
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.AppleSMBusPCI          1.0.11d0
    com.apple.driver.AppleSMC          3.1.4d2
    com.apple.driver.AppleGraphicsControl          3.4.5
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.iokit.IONDRVSupport          2.3.7
    com.apple.driver.AppleSMBusController          1.0.11d0
    com.apple.driver.IOPlatformPluginFamily          5.3.0d51
    com.apple.iokit.IOGraphicsFamily          2.3.7
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.5
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOAHCISerialATAPI          2.5.1
    com.apple.driver.AppleThunderboltDPOutAdapter          1.8.9
    com.apple.driver.AppleThunderboltDPInAdapter          1.8.9
    com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.9
    com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.6
    com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.5
    com.apple.iokit.IOUSBMassStorageClass          3.5.1
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.5
    com.apple.iokit.IOUSBHIDDriver          5.2.5
    com.apple.driver.AppleUSBMergeNub          5.5.5
    com.apple.driver.AppleUSBComposite          5.2.5
    com.apple.driver.AppleThunderboltNHI          1.7.8
    com.apple.iokit.IOThunderboltFamily          2.4.0
    com.apple.iokit.IOUSBUserClient          5.5.5
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IOEthernetAVBController          1.0.2b1
    com.apple.iokit.IO80211Family          530.4
    com.apple.iokit.IONetworkingFamily          3.0
    com.apple.iokit.IOAHCIFamily          2.3.1
    com.apple.iokit.IOUSBFamily          5.6.0
    com.apple.driver.AppleEFIRuntime          1.7
    com.apple.iokit.IOHIDFamily          1.8.1
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          220.3
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.DiskImages          345
    com.apple.iokit.IOStorageFamily          1.8
    com.apple.driver.AppleKeyStore          28.21
    com.apple.driver.AppleACPIPlatform          1.7
    com.apple.iokit.IOPCIFamily          2.7.3
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0
    Model: iMac12,1, BootROM IM121.0047.B1F, 4 processors, Intel Core i5, 2.5 GHz, 12 GB, SMC 1.71f21
    Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x0000, 0x4B425F34475F44335F313333335F43390000
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3231554538424655302D444A2D4620
    Memory Module: BANK 0/DIMM1, 4 GB, DDR3, 1333 MHz, 0x0000, 0x4B425F34475F44335F313333335F43390000
    Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3231554538424655302D444A2D4620
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.72.0-P2P
    Bluetooth: Version 4.1.4f2 12041, 2 service, 18 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: WDC WD5000AAKS-402AA0, 500.11 GB
    Serial ATA Device: HL-DT-STDVDRW  GA32N
    USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x850b, 0xfa200000 / 3
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: LG CDMA USB Modem, 0x1004  (LG Electronics Inc.), 0x6000, 0xfa120000 / 6
    USB Device: Wireless Mouse, 0x05b8, 0x3166, 0xfa130000 / 5
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfd110000 / 4
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3

    Hi Kirk, not much to go on there for me, sorry.
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed. Or an errant process eating up RAM.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons

  • New iMac extremely slow following migration (Help  with Etre Check diagnosis)

    Hi gurus,
    New iMac - scheduled for genius bar on Friday but trying to avoid the trip.  Migrated everything over from 2009 macbook pro to 2011 macbook and now 2013 iMac.  I imagine there is a lot of cruft from the repeated migrations and am close to just wiping and migrating from scratch.  I don't know, however, how to get my old mail and other critical settings over.
    Problem is clearly in the user account.  I created a separate admin account and that runs relatively fine.  Is the below user account salvageable? Should I delete all my old permissions?  Any tips would be appreciated.  Thanks for the Etrecheck program,
    Problem description:
    Application hangs and system unresponsive in migrated user account
    EtreCheck version: 2.1.8 (121)
    Report generated February 16, 2015 at 4:48:06 PM PST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (21.5-inch, Late 2013) (Technical Specifications)
        iMac - model: iMac14,1
        1 2.7 GHz Intel Core i5 CPU: 4-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1600 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1600 MHz ok
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en1: 802.11 a/b/g/n/ac
    Video Information: ℹ️
        Intel Iris Pro
            iMac 1920 x 1080
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 4:51:57
    Disk Information: ℹ️
        APPLE HDD HTS541010A9E662 disk0 : (1 TB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 999.35 GB (585.74 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
        TOSHIBA External USB 3.0 2 TB
            EFI (disk3s1) <not mounted> : 210 MB
            Time Capsule (disk3s2) <not mounted> : 2.00 TB
        Western Digital My Book 1130 2 TB
            EFI (disk1s1) <not mounted> : 210 MB
            ACbook (disk1s2) <not mounted> : 2.00 TB
        Centon DataStick 30.93 GB
            EFI (disk2s1) <not mounted> : 210 MB
            Install OS X Yosemite (disk2s2) /Volumes/Install OS X Yosemite : 30.59 GB (25.27 GB free)
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /System/Library/Extensions
        [not loaded]    com.Cycling74.driver.Soundflower (1.4.2) [Click for support]
        [not loaded]    com.eltima.ElmediaPlayer.kext (1.58 - SDK 10.4) [Click for support]
        [not loaded]    com.logmein.hamachi (1.0) [Click for support]
        [not loaded]    com.seagate.driver.PowSecDriverCore (5.1.1) [Click for support]
        [not loaded]    com.wdc.driver.1394HP (1.0.7) [Click for support]
        [not loaded]    com.wdc.driver.USBHP (1.0.7) [Click for support]
        [loaded]    net.telestream.driver.TelestreamAudio (1.1.0 - SDK 10.8) [Click for support]
            /System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
        [not loaded]    com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) [Click for support]
        [not loaded]    com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) [Click for support]
        [not loaded]    com.seagate.driver.SeagateDriveIcons (5.1.1) [Click for support]
    Problem System Launch Agents: ℹ️
        [killed]    com.apple.accountsd.plist
        [killed]    com.apple.AirPlayUIAgent.plist
        [killed]    com.apple.bird.plist
        [killed]    com.apple.CallHistoryPluginHelper.plist
        [killed]    com.apple.CallHistorySyncHelper.plist
        [killed]    com.apple.cloudd.plist
        [killed]    com.apple.cmfsyncagent.plist
        [killed]    com.apple.coreservices.appleid.authentication.plist
        [killed]    com.apple.coreservices.uiagent.plist
        [killed]    com.apple.iconservices.iconservicesagent.plist
        [killed]    com.apple.Maps.pushdaemon.plist
        [killed]    com.apple.nsurlsessiond.plist
        [killed]    com.apple.pluginkit.pkd.plist
        [killed]    com.apple.recentsd.plist
        [killed]    com.apple.SafariNotificationAgent.plist
        [killed]    com.apple.sbd.plist
        [killed]    com.apple.scopedbookmarkagent.xpc.plist
        [killed]    com.apple.secd.plist
        [killed]    com.apple.secinitd.plist
        [killed]    com.apple.security.cloudkeychainproxy.plist
        [killed]    com.apple.spindump_agent.plist
        [killed]    com.apple.tccd.plist
        [killed]    com.apple.telephonyutilities.callservicesd.plist
        23 processes killed due to memory pressure
    Problem System Launch Daemons: ℹ️
        [killed]    com.apple.AssetCacheLocatorService.plist
        [killed]    com.apple.awdd.plist
        [killed]    com.apple.coresymbolicationd.plist
        [killed]    com.apple.ctkd.plist
        [killed]    com.apple.diagnosticd.plist
        [killed]    com.apple.GSSCred.plist
        [killed]    com.apple.iconservices.iconservicesagent.plist
        [killed]    com.apple.iconservices.iconservicesd.plist
        [killed]    com.apple.ifdreader.plist
        [killed]    com.apple.MobileFileIntegrity.plist
        [killed]    com.apple.nehelper.plist
        [killed]    com.apple.nsurlsessiond.plist
        [killed]    com.apple.periodic-daily.plist
        [killed]    com.apple.sandboxd.plist
        [killed]    com.apple.secinitd.plist
        [killed]    com.apple.softwareupdate_download_service.plist
        [killed]    com.apple.spindump.plist
        [killed]    com.apple.sysmond.plist
        [killed]    com.apple.systemstatsd.plist
        [killed]    com.apple.tccd.system.plist
        [killed]    com.apple.wdhelper.plist
        [killed]    org.cups.cupsd.plist
        22 processes killed due to memory pressure
    Launch Agents: ℹ️
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [not loaded]    com.maintain.LogOut.plist [Click for support]
        [not loaded]    com.maintain.Restart.plist [Click for support]
        [not loaded]    com.maintain.ShutDown.plist [Click for support]
        [not loaded]    com.maintain.Sleep.plist [Click for support]
        [running]    com.maintain.SystemEvents.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [running]    com.seagate.SeagateStorageGauge.plist [Click for support]
        [loaded]    org.macosforge.xquartz.startx.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [running]    com.bombich.ccchelper.plist [Click for support]
        [running]    com.crashplan.engine.plist [Click for support]
        [running]    com.eltima.ElmediaPlayer.daemon.plist [Click for support]
        [failed]    com.google.GoogleML.plist [Click for support]
        [loaded]    com.google.keystone.daemon.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.rogueamoeba.hermes.plist [Click for support]
        [failed]    com.vmware.launchd.vmware.plist [Click for support]
        [running]    com.zqueue.servetome-server.plist [Click for support]
        [loaded]    jp.co.canon.MasterInstaller.plist [Click for support]
        [loaded]    net.sourceforge.MonolingualHelper.plist [Click for support]
        [loaded]    org.macosforge.xquartz.privileged_startx.plist [Click for support]
    User Launch Agents: ℹ️
        [running]    .dat0598.40e (hidden) [Click for support]
            /usr/bin/osascript /usr/bin/osascript osascript -e tell application "Folder Actions Dispatcher" to tick
        [unknown]    .datdf56.40b (hidden) [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [failed]    com.amazon.cloud-player.plist [Click for support]
        [running]    com.amazon.music.plist [Click for support]
        [running]    com.microsoft.LaunchAgent.SyncServicesAgent.plist [Click for support]
        [running]    com.mlbam.nexdef.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Application  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        Canon IJ Network Scanner Selector2    UNKNOWN  (missing value)
        Dropbox    Application  (/Applications/Dropbox.app)
        ACbook    UNKNOWN  (missing value)
        CrashPlan menu bar    UNKNOWN  (missing value)
        CrashPlan menu bar    Application  (/Applications/CrashPlan.app/Contents/Helpers/CrashPlan menu bar.app)
        Canon IJ Network Scanner Selector EX    Application  (/Applications/Canon Utilities/IJ Network Scanner Selector EX/Canon IJ Network Scanner Selector EX.app)
        Caffeine    UNKNOWN  (missing value)
    Internet Plug-ins: ℹ️
        EPPEX Plugin: Version: 10.0 [Click for support]
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        SlingPlayer: Version: Unknown - SDK 10.8 [Click for support]
        AdobePDFViewer: Version: 9.5.5 [Click for support]
        Leap Web Player: Version: LeapPlayer version 2.0.2f2 [Click for support]
        Unity Web Player: Version: UnityPlayer version 3.5.5f4 - SDK 10.6 [Click for support]
        nppanda3d: Version: Unknown [Click for support]
        googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
        RealPlayer Plugin: Version: Unknown [Click for support]
        QuickTime Plugin: Version: 7.7.3
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        DivXBrowserPlugin: Version: 1.4 [Click for support]
        Silverlight: Version: 4.0.60129.0 [Click for support]
        CoolirisWebKitPlugin: Version: Unknown [Click for support]
        Google Earth Web Plug-in: Version: 6.0 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        Easy-WebPrint EX: Version: 1.0.0 [Click for support]
        o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        Flip4Mac WMV Plugin: Version: 2.3.8.1 [Click for support]
        SharePointBrowserPlugin: Version: 14.4.3 - SDK 10.6 [Click for support]
        ContentUploaderPlugin: Version: 1.2 [Click for support]
        JavaAppletPlugin: Version: Java 8 Update 31 Check version
    User internet Plug-ins: ℹ️
        Picasa: Version: 1.0 [Click for support]
    3rd Party Preference Panes: ℹ️
        RCDefaultApp
        Flash Player  [Click for support]
        Flip4Mac WMV  [Click for support]
        Java  [Click for support]
        Perian  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: OFF
        Auto backup: NO - Auto backup turned off
        Volumes being backed up:
            Macintosh HD: Disk size: 999.35 GB Disk used: 413.60 GB
        Destinations:
            Untitled [Local]
            Total size: 0 B
            Total number of backups: 0
            Oldest backup: -
            Last backup: -
            Size of backup disk: Too small
                Backup size 0 B < (Disk used 413.60 GB X 3)
    Top Processes by CPU: ℹ️
            11%    BitdefenderVirusScanner
             7%    WindowServer
             1%    loginwindow
             0%    SystemUIServer
             0%    dpd
    Top Processes by Memory: ℹ️
        94 MB    BitdefenderVirusScanner
        60 MB    Finder
        34 MB    mds_stores
        26 MB    CrashPlanService
        26 MB    WindowServer
    Virtual Memory Information: ℹ️
        34 MB    Free RAM
        1.24 GB    Active RAM
        1.23 GB    Inactive RAM
        1.81 GB    Wired RAM
        37.21 GB    Page-ins
        1.05 GB    Page-outs
    Diagnostics Information: ℹ️
        Feb 16, 2015, 04:30:47 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/BitdefenderVirusScanner_2015-0 2-16-163047_[redacted].crash
        Feb 16, 2015, 02:41:32 PM    /Library/Logs/DiagnosticReports/firefox_2015-02-16-144132_[redacted].hang
        Feb 16, 2015, 02:40:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-02-16-144005_[reda cted].crash
        Feb 16, 2015, 01:21:20 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/BitdefenderVirusScanner_2015-0 2-16-132120_[redacted].crash
        Feb 16, 2015, 11:56:57 AM    /Library/Logs/DiagnosticReports/Folder Actions Dispatcher_2015-02-16-115657_[redacted].cpu_resource.diag [Click for details]
        Feb 16, 2015, 11:50:54 AM    /Library/Logs/DiagnosticReports/com.zqueue.servetome-server_2015-02-16-115054_[ redacted].crash
        Feb 16, 2015, 11:49:07 AM    Self test - passed
        Feb 16, 2015, 09:55:04 AM    /Library/Logs/DiagnosticReports/Folder Actions Dispatcher_2015-02-16-095504_[redacted].cpu_resource.diag [Click for details]
        Feb 16, 2015, 09:44:52 AM    /Library/Logs/DiagnosticReports/Folder Actions Dispatcher_2015-02-16-094452_[redacted].cpu_resource.diag [Click for details]
        Feb 15, 2015, 03:02:01 PM    /Library/Logs/DiagnosticReports/ClamXav_2015-02-15-150201_[redacted].hang
        Feb 15, 2015, 02:58:45 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-02-15-145845_[reda cted].crash
        Feb 15, 2015, 12:35:39 AM    /Library/Logs/DiagnosticReports/Folder Actions Dispatcher_2015-02-15-003539_[redacted].cpu_resource.diag [Click for details]
        Feb 15, 2015, 12:19:21 AM    /Library/Logs/DiagnosticReports/CrashPlanService_2015-02-15-001921_[redacted].c pu_resource.diag [Click for details]
        Feb 14, 2015, 11:45:36 PM    /Library/Logs/DiagnosticReports/Folder Actions Dispatcher_2015-02-14-234536_[redacted].cpu_resource.diag [Click for details]
        Feb 14, 2015, 07:00:58 PM    /Library/Logs/DiagnosticReports/Folder Actions Dispatcher_2015-02-14-190058_[redacted].cpu_resource.diag [Click for details]
        Feb 14, 2015, 03:54:47 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/ClamXav_2015-02-14-155447_[red acted].crash
        Feb 14, 2015, 03:18:24 PM    /Library/Logs/DiagnosticReports/Folder Actions Dispatcher_2015-02-14-151824_[redacted].cpu_resource.diag [Click for details]

    Everything is included below.  Shortly before I ran the script I disabled folder actions which appeared to have a bunch of redundant and scripts that were taking close to 6-7 gigs of ram,   It'll be interesting to review the below.  Thanks Mr. Davis, you are a major resource, 
    Start time: 09:12:51 02/17/15
    Revision: 1241
    Model Identifier: iMac14,1
    System Version: OS X 10.10.2 (14C109)
    Kernel Version: Darwin 14.1.0
    Time since boot: 7:55
    UID: 501
    USB
        My Book 1130 (Western Digital Technologies, Inc.)
        External USB 3.0 (Toshiba America Info. Systems, Inc.)
        DataStick (Alcor Micro, Corp.)
    Bluetooth
        Apple Magic Mouse
        Apple Wireless Keyboard
    Activity
        CPU: user 18%, system 19%
    CPU usage (%)
        mds (UID 0): 19.5
    I/O wait time (ms/s)
        mds (UID 0): 1156
        mdworker (UID 89): 186
    I/O requests (KiB/s)
        mds (UID 0): 4892
    System errors (per sec)
        mdworker (UID 89, error 2): 158
        mds (UID 0, error 2): 149
        mds (UID 0, error 20): 116
    Trusted certs (user)
        63.197.157.203
    Firewall: On
    Listeners
        kdc: kerberos
        launchd: afpovertcp
        launchd: microsoft-ds
        launchd: printer
        launchd: ssh
    System caches/logs
        1166 MB: /Library/Caches/CrashPlan/42/cpfmf
    Diagnostic reports
        2015-02-14 ClamXav crash
        2015-02-15 ClamXav hang
        2015-02-15 garcon crash
        2015-02-16 BitdefenderVirusScanner crash x2
        2015-02-16 Kernel gpuRestart
        2015-02-16 com.zqueue.servetome-server crash
        2015-02-16 firefox hang
        2015-02-16 garcon crash
    I/O errors
        disk3s2: data underrun 1
        disk1s2: do_jnl_io: strategy err 0x6 2
    Volumes
        disk0s2: /
        disk1s2: /Volumes/Install
        disk3s2: /Volumes/ACbook
        disk2s2: /Volumes/Time
    Kernel log
        Feb 15 09:48:38 warning: loginwindow(73) performed out-of-band resume on ClamXav(2059)
        Feb 15 09:48:38 warning: loginwindow(73) performed out-of-band resume on Console(2347)
        Feb 15 09:48:38 warning: loginwindow(73) performed out-of-band resume on iTunes(2727)
        Feb 15 09:48:43 IOAudioStream[0xffffff802f3abc00]::clipIfNecessary() - Error: counted 1 clip more than one buffer ahead errors.
        Feb 15 14:53:10 warning: loginwindow(73) performed out-of-band resume on ClamXav(2059)
        Feb 15 14:56:36 warning: loginwindow(73) performed out-of-band resume on ClamXav(2059)
        Feb 16 09:39:13 utun_start: ifnet_disable_output returned error 12
        Feb 16 10:07:25 Trying restart GPU ...
        Feb 16 11:43:50 jnl: disk1s2: write_journal_header: error writing the journal header!
        Feb 16 11:43:51 jnl: disk1s2: close: journal 0xffffff802b4daa80, is invalid.  aborting outstanding transactions
        Feb 16 11:51:14 utun_start: ifnet_disable_output returned error 12
        Feb 16 11:57:11 jnl: disk1s2: write_journal_header: error writing the journal header!
        Feb 16 11:57:11 jnl: disk1s2: close: journal 0xffffff8025c1cc20, is invalid.  aborting outstanding transactions
        Feb 16 14:22:43 Limiting closed port RST response from 423 to 250 packets per second
        Feb 16 14:24:06 Limiting closed port RST response from 264 to 250 packets per second
        Feb 16 14:24:28 Limiting closed port RST response from 324 to 250 packets per second
        Feb 16 14:24:42 Limiting closed port RST response from 251 to 250 packets per second
        Feb 17 01:18:41 Sleep failure code 0x00000088 0x14006700
        Feb 17 01:18:41 System was rebooted due to Sleep/Wake failure
        Feb 17 01:18:41 Failed to open swap file 30
        Feb 17 01:18:41 vm_swap_create_file failed @ 19 secs
        Feb 17 01:18:41 USBF:    20.861    AppleUSBHubPort::FatalError - Port 1 of Hub at 0x14800000 reported error 0xe00002ed while doing getting port status (4)
        Feb 17 01:18:41 USBF:    20.861    AppleUSBHubPort::FatalError - Port 1 of Hub at 0x14800000 reported error 0xe00002c0 while doing clearing port feature (2)
        Feb 17 01:19:29 utun_start: ifnet_disable_output returned error 12
        Feb 17 08:10:16 [IOBluetoothHCIController][handleACLPacketTimeout] -- Disconnecting due to device not responding (ACL Packet timed out) for connection handle 0x40
    System log
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:09:31 WindowServer disable_update_timeout: UI updates were forcibly disabled by application "Safari" for over 1.00 seconds. Server has re-enabled them.
        Feb 17 09:09:31 WindowServer WSGetSurfaceInWindow : Invalid surface 687364876 for window 227
        Feb 17 09:09:37 WindowServer disable_update_timeout: UI updates were forcibly disabled by application "Safari" for over 1.00 seconds. Server has re-enabled them.
        Feb 17 09:09:38 WindowServer WSGetSurfaceInWindow : Invalid surface 1046946449 for window 227
    Console log
        Feb 17 07:47:09 nsurlstoraged The read-connection to the DB=/Users/USER/Library/Caches/com.apple.icloud.fmfd/Cache.db is NOT valid.  Unable to determine schema version.
        Feb 17 07:47:09 nsurlstoraged realpath() returned NULL for /Users/USER/Library/Caches/com.apple.icloud.fmfd
        Feb 17 07:47:09 nsurlstoraged realpath() returned NULL for /Users/USER/Library/Caches/com.apple.icloud.fmfd
        Feb 17 07:47:53 nsurlstoraged realpath() returned NULL for /Users/USER/Library/Caches/com.apple.icloud.fmfd
        Feb 17 07:47:53 nsurlstoraged The read-connection to the DB=/Users/USER/Library/Caches/com.apple.icloud.fmfd/Cache.db is NOT valid.  Unable to determine schema version.
        Feb 17 07:47:53 nsurlstoraged realpath() returned NULL for /Users/USER/Library/Caches/com.apple.icloud.fmfd
        Feb 17 07:47:53 nsurlstoraged realpath() returned NULL for /Users/USER/Library/Caches/com.apple.icloud.fmfd
        Feb 17 07:54:18 ReportCrash Invoking spindump for pid=9255 wakeups_rate=757 duration=60 because of excessive wakeups
        Feb 17 07:54:59 ReportCrash Invoking spindump for pid=9269 wakeups_rate=1144 duration=40 because of excessive wakeups
        Feb 17 08:09:53 ReportCrash Invoking spindump for pid=417 wakeups_rate=252 duration=179 because of excessive wakeups
        Feb 17 08:15:34 ReportCrash Invoking spindump for pid=9290 wakeups_rate=203 duration=222 because of excessive wakeups
        Feb 17 08:18:12 ReportCrash Invoking spindump for pid=6328 wakeups_rate=185 duration=244 because of excessive wakeups
        Feb 17 08:28:18 ReportCrash Invoking spindump for pid=9314 wakeups_rate=3955 duration=12 because of excessive wakeups
        Feb 17 08:32:28 ReportCrash Invoking spindump for pid=9321 wakeups_rate=609 duration=74 because of excessive wakeups
        Feb 17 08:36:08 ReportCrash Invoking spindump for pid=9331 wakeups_rate=573 duration=79 because of excessive wakeups
        Feb 17 08:38:36 ReportCrash Invoking spindump for pid=9348 wakeups_rate=1503 duration=30 because of excessive wakeups
        Feb 17 08:41:49 ReportCrash Invoking spindump for pid=9378 wakeups_rate=725 duration=63 because of excessive wakeups
        Feb 17 08:45:39 ReportCrash Invoking spindump for pid=9390 wakeups_rate=398 duration=114 because of excessive wakeups
        Feb 17 08:49:04 ReportCrash Invoking spindump for pid=9420 thread=174222 percent_cpu=63 duration=143 because of excessive cpu utilization
        Feb 17 08:50:57 nsurlstoraged Error: execSQLStatement:onConnection:toCompletionWithRetry - SQL=COMMIT;, error-code=1, error-message=cannot commit - no transaction is active
        Feb 17 08:51:18 mdworker Error loading /Applications/GarageBand.app/Contents/Library/Spotlight/GarageBandSpotlightImpo rter.mdimporter/Contents/MacOS/GarageBandSpotlightImporter:  dlopen(/Applications/GarageBand.app/Contents/Library/Spotlight/GarageBandSpotli ghtImporter.mdimporter/Contents/MacOS/GarageBandSpotlightImporter, 262): Library not loaded: @rpath/MAFiles.framework/Versions/A/MAFiles
         Referenced from: /Applications/GarageBand.app/Contents/Library/Spotlight/GarageBandSpotlightImpo rter.mdimporter/Contents/MacOS/GarageBandSpotlightImporter
         Reason: image not found
        Feb 17 08:51:18 mdworker Cannot find function pointer MetadataImporterPluginFactory for factory UUID in CFBundle/CFPlugIn 0x7f8b9870c650 </Applications/GarageBand.app/Contents/Library/Spotlight/GarageBandSpotlightImp orter.mdimporter> (bundle, not loaded)
        Feb 17 09:10:19 nsurlstoraged ERROR: unable to get the receiver data from the DB!
    Loaded kernel extensions
        net.telestream.driver.TelestreamAudio (1.1.0)
    Daemons
        com.adobe.fpsaud
        com.apple.AccountPolicyHelper
        com.apple.CodeSigningHelper
        com.apple.Kerberos.kdc
        - status: 1
        com.apple.MobileFileIntegrity
        com.apple.aelwriter
        com.apple.awdd
        com.apple.cache_delete
        com.apple.cfprefsd.xpc.daemon
        com.apple.coreduetd
        com.apple.coresymbolicationd
        com.apple.ctkd
        com.apple.diagnosticd
        com.apple.dpd
        - status: 75
        com.apple.icloud.findmydeviced
        com.apple.iconservices.iconservicesagent
        com.apple.iconservices.iconservicesd
        com.apple.ifdreader
        com.apple.nehelper
        com.apple.networkd_privileged
        com.apple.nsurlsessiond_privileged
        com.apple.nsurlstoraged
        com.apple.periodic-daily
        com.apple.periodic-weekly
        com.apple.sandboxd
        com.apple.secinitd
        com.apple.softwareupdate_download_service
        com.apple.softwareupdated
        com.apple.spindump
        com.apple.sysmond
        com.apple.systemstatsd
        com.apple.tccd.system
        com.apple.watchdogd
        com.apple.wdhelper
        com.bombich.ccchelper
        com.eltima.ElmediaPlayer.daemon
        com.google.GoogleML
        - status: 1
        com.google.keystone.daemon
        com.microsoft.office.licensing.helper
        com.oracle.java.Helper-Tool
        com.rogueamoeba.hermes
        com.vmware.launchd.vmware
        - status: 78
        com.zqueue.servetome-server
        jp.co.canon.MasterInstaller
        net.sourceforge.MonolingualHelper
        org.cups.cupsd
        org.macosforge.xquartz.privileged_startx
    Agents
        com.adobe.ARM.UUID
        com.amazon.cloud-player
        - status: 78
        com.amazon.music
        com.apple.Safari
        com.apple.photostream-agent
        com.google.keystone.system.agent
        com.maintain.SystemEvents
        com.microsoft.SyncServicesAgent
        com.mlbam.nexdef
        com.oracle.java.Java-Updater
        com.seagate.SeagateStorageGauge.plist
        org.macosforge.xquartz.startx
    User overrides
        com.apple.imagent.monaco
        com.apple.FTMonitor
        com.apple.apsd-ft
    User login items
        iTunesHelper
        - /Applications/iTunes.app/Contents/MacOS/iTunesHelper.app
        Canon IJ Network Scanner Selector2
        - missing value
        Dropbox
        - /Applications/Dropbox.app
        ACbook
        - /Volumes/ACbook
        CrashPlan menu bar
        - missing value
        CrashPlan menu bar
        - /Applications/CrashPlan.app/Contents/Helpers/CrashPlan menu bar.app
        Canon IJ Network Scanner Selector EX
        - /Applications/Canon Utilities/IJ Network Scanner Selector EX/Canon IJ Network Scanner Selector EX.app
        Caffeine
        - missing value
    Firefox extensions
        Mozilla Firefox hotfix
        Hide My ***! Web Proxy
        FoxyProxy Standard
        Jesper Staun Hansen
        Torrent Tornado
        Torrent Finder Toolbar
    Widgets
        iStat nano
    iCloud errors
        bird 405
        cloudd 68
        CallHistorySyncHelper 6
        Safari 4
        accountsd 2
    Continuity errors
        lsuseractivityd 8
        Safari 2
    Restricted files: 43
    Lockfiles: 22
    Accessibility
        Keyboard Zoom: On
        Scroll Zoom: On
    Contents of /Library/LaunchAgents/com.maintain.LogOut.plist
        - mod date: Feb  9 20:01:50 2015
        - checksum: 2486542021
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Disabled</key>
        <true/>
        <key>Label</key>
        <string>com.maintain.LogOut</string>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/bin/osascript</string>
        <string>-e</string>
        <string>delay 3</string>
        <string>-e</string>
        <string>try</string>
        <string>-e</string>
        <string>do shell script &quot;killall Cocktail&quot;</string>
        <string>-e</string>
        <string>end try</string>
        <string>-e</string>
        <string>ignoring application responses</string>
        <string>-e</string>
        <string>try</string>
        <string>-e</string>
        <string>tell application &quot;System Events&quot; to log out</string>
        ...and 7 more line(s)
    Contents of /Library/LaunchAgents/com.maintain.Restart.plist
        - mod date: Feb  9 19:55:16 2015
        - checksum: 1856196442
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Disabled</key>
        <true/>
        <key>Label</key>
        <string>com.maintain.Restart</string>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/bin/osascript</string>
        <string>-e</string>
        <string>delay 3</string>
        <string>-e</string>
        <string>try</string>
        <string>-e</string>
        <string>do shell script &quot;killall Cocktail&quot;</string>
        <string>-e</string>
        <string>end try</string>
        <string>-e</string>
        <string>ignoring application responses</string>
        <string>-e</string>
        <string>try</string>
        <string>-e</string>
        <string>tell application &quot;System Events&quot; to restart</string>
        ...and 7 more line(s)
    Contents of /Library/LaunchAgents/com.maintain.ShutDown.plist
        - mod date: Feb  9 19:55:17 2015
        - checksum: 2131448796
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Disabled</key>
        <true/>
        <key>Label</key>
        <string>com.maintain.ShutDown</string>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/bin/osascript</string>
        <string>-e</string>
        <string>delay 3</string>
        <string>-e</string>
        <string>try</string>
        <string>-e</string>
        <string>do shell script &quot;killall Cocktail&quot;</string>
        <string>-e</string>
        <string>end try</string>
        <string>-e</string>
        <string>ignoring application responses</string>
        <string>-e</string>
        <string>try</string>
        <string>-e</string>
        <string>tell application &quot;System Events&quot; to shut down</string>
        ...and 7 more line(s)
    Contents of /Library/LaunchAgents/com.maintain.Sleep.plist
        - mod date: Feb  9 20:01:53 2015
        - checksum: 2684026111
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Disabled</key>
        <true/>
        <key>Label</key>
        <string>com.maintain.Sleep</string>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/bin/osascript</string>
        <string>-e</string>
        <string>delay 3</string>
        <string>-e</string>
        <string>try</string>
        <string>-e</string>
        <string>do shell script &quot;killall Cocktail&quot;</string>
        <string>-e</string>
        <string>end try</string>
        <string>-e</string>
        <string>ignoring application responses</string>
        <string>-e</string>
        <string>try</string>
        <string>-e</string>
        <string>tell application &quot;System Events&quot; to sleep</string>
        ...and 7 more line(s)
    Contents of /Library/LaunchAgents/com.maintain.SystemEvents.plist
        - mod date: Feb  9 19:55:17 2015
        - checksum: 1297325733
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Disabled</key>
        <false/>
        <key>KeepAlive</key>
        <true/>
        <key>Label</key>
        <string>com.maintain.SystemEvents</string>
        <key>ProgramArguments</key>
        <array>
        <string>/System/Library/CoreServices/System Events.app/Contents/MacOS/System Events</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        </dict>
        </plist>
    Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist
        - mod date: Feb  6 15:45:52 2015
        - checksum: 655956191
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.oracle.java.Java-Updater</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
        <string>-bgcheck</string>
        </array>
        <key>StandardErrorPath</key>
        <string>/dev/null</string>
        <key>StandardOutPath</key>
        <string>/dev/null</string>
        <key>StartCalendarInterval</key>
        <dict>
        <key>Hour</key>
        <integer>17</integer>
        <key>Minute</key>
        <integer>49</integer>
        <key>Weekday</key>
        <integer>1</integer>
        </dict>
        </dict>
        ...and 1 more line(s)
    Contents of /Library/LaunchAgents/com.seagate.SeagateStorageGauge.plist
        - mod date: Mar 10 08:38:47 2010
        - checksum: 3262128215
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <!--
           com.seagate.SeagateStorageGauge.plist
           SeagateDiagnostics
           Created by John Brisbin on 3/10/10.
           Copyright 2010 Seagate Technologies LLC.. All rights reserved.
        -->
        <plist version="1.0">
        <dict>
        <key>KeepAlive</key>
        <true/>
        <key>Label</key>
        <string>com.seagate.SeagateStorageGauge.plist</string>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>OnDemand</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Application Support/Seagate/Seagate Storage Gauge.app/Contents/MacOS/Seagate Storage Gauge</string>
        <string>-doautolnch</string>
        <string>/Library/Application Support/Seagate/Seagate Storage Gauge.app</string>
        </array>
        <key>RunAtLoad</key>
        ...and 3 more line(s)
    Contents of /Library/LaunchDaemons/com.bombich.ccchelper.plist
        - mod date: Feb  6 13:35:20 2015
        - checksum: 495358405
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.bombich.ccchelper</string>
        <key>MachServices</key>
        <dict>
        <key>com.bombich.ccchelper</key>
        <true/>
        </dict>
        <key>Program</key>
        <string>/Library/PrivilegedHelperTools/com.bombich.ccchelper</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/PrivilegedHelperTools/com.bombich.ccchelper</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        </dict>
        </plist>
    Contents of /Library/LaunchDaemons/com.crashplan.engine.plist
        - mod date: Jan 10 11:46:36 2015
        - checksum: 757054163
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.crashplan.engine</string>
        <key>UserName</key>
        <string>root</string>
        <key>GroupName</key>
        <string>wheel</string>
        <key>Nice</key>
        <integer>20</integer>
        <key>KeepAlive</key>
        <true/>
        <key>OnDemand</key>
        <false/>
        <key>RunAtLoad</key>
        <true/>
        <key>AbandonProcessGroup</key>
        <true/>
        <key>WorkingDirectory</key>
        <string>/Applications/CrashPlan.app/Contents/Resources/Java</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/CrashPlan.app/Contents/MacOS/CrashPlanService</string>
        ...and 26 more line(s)
    Contents of /Library/LaunchDaemons/com.eltima.ElmediaPlayer.daemon.plist
        - mod date: Oct  9 06:40:45 2012
        - checksum: 1274124936
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Disabled</key>
        <false/>
        <key>KeepAlive</key>
        <false/>
        <key>Label</key>
        <string>com.eltima.ElmediaPlayer.daemon</string>
        <key>LaunchOnlyOnce</key>
        <true/>
        <key>OnDemand</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Application Support/ElmediaPlayer/empdaemon</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        </dict>
        </plist>
    Contents of /Library/LaunchDaemons/com.google.GoogleML.plist
        - mod date: Mar 10 10:19:30 2008
        - checksum: 315725308
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.google.GoogleML</string>
        <key>OnDemand</key>
        <true/>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Google/GoogleML/GoogleML.bundle/Contents/MacOS/googleml-modwat ch</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StandardOutPath</key>
        <string>/dev/null</string>
        <key>UserName</key>
        <string>root</string>
        <key>WatchPaths</key>
        <array>
        <string>/Library/Google/GoogleML/Modules</string>
        <string>/Library/Google/GoogleML</string>
        </array>
        </dict>
        </plist>
    Contents of /Library/LaunchDaemons/com.rogueamoeba.hermes.plist
        - mod date: Jul 15 21:05:58 2008
        - checksum: 1539233627
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>GroupName</key>
        <string>wheel</string>
        <key>Label</key>
        <string>com.rogueamoeba.hermes</string>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/local/hermes/bin/hermesctl</string>
        <string>update</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>ServiceIPC</key>
        <true/>
        <key>UserName</key>
        <string>root</string>
        <key>WatchPaths</key>
        <array>
        <string>/usr/local/hermes/modules</string>
        </array>
        </dict>
        </plist>
    Contents of /Library/LaunchDaemons/com.vmware.launchd.vmware.plist
        - mod date: Nov  2 16:11:08 2007
        - checksum: 1467462916
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN"
                "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
                <key>Label</key>
                <string>com.vmware.launchd.vmware</string>
                <key>ProgramArguments</key>
                <array>
                        <string>/Library/Application Support/VMware Fusion/boot.sh</string>
                        <string>--start</string>
                </array>
                <key>RunAtLoad</key>
                <true/>
        </dict>
        </plist>
    Contents of /Library/LaunchDaemons/com.zqueue.servetome-server.plist
        - mod date: Sep 22 07:54:14 2014
        - checksum: 1392131937
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>KeepAlive</key>
        <dict>
        <key>PathState</key>
        <dict>
        <key>/Library/Application Support/ServeToMe/incoming/settings.xml</key>
        <true/>
        </dict>
        <key>SuccessfulExit</key>
        <false/>
        </dict>
        <key>Label</key>
        <string>com.zqueue.servetome-server</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/PrivilegedHelperTools/com.zqueue.servetome-server</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>ThrottleInterval</key>
        <integer>5</integer>
        </dict>
        ...and 1 more line(s)
    Contents of /Library/LaunchDaemons/jp.co.canon.MasterInstaller.plist
        - mod date: Nov 11 12:21:11 2014
        - checksum: 4111951265
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>jp.co.canon.MasterInstaller</string>
        <key>Program</key>
        <string>/Library/PrivilegedHelperTools/jp.co.canon.MasterInstaller</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/PrivilegedHelperTools/jp.co.canon.MasterInstaller</string>
        </array>
        <key>ServiceIPC</key>
        <true/>
        <key>Sockets</key>
        <dict>
        <key>MasterSocket</key>
        <dict>
        <key>SockFamily</key>
        <string>Unix</string>
        <key>SockPathMode</key>
        <integer>438</integer>
        <key>SockPathName</key>
        <string>/var/run/jp.co.canon.MasterInstaller.socket</string>
        <key>SockType</key>
        ...and 5 more line(s)
    Contents of /Library/LaunchDaemons/net.sourceforge.MonolingualHelper.plist
        - mod date: Sep 16 12:53:32 2012
        - checksum: 4229206510
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>net.sourceforge.MonolingualHelper</string>
        <key>MachServices</key>
        <dict>
        <key>net.sourceforge.MonolingualHelper</key>
        <true/>
        </dict>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/PrivilegedHelperTools/net.sourceforge.MonolingualHelper</strin g>
        </array>
        </dict>
        </plist>
    Contents of /System/Library/Security/authorization.plist
        - mod date: Jan  7 19:31:13 2015
        - checksum: 2720110640
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>comment</key>
        <string>The name of the requested right is matched against the keys.  An exact match has priority, otherwise the longest match from the start is used. Note that the right will only match wildcard rules (ending in a ".") during this reduction.
        allow rule: this is always allowed
        &lt;key&gt;com.apple.TestApp.benign&lt;/key&gt;
        &lt;string&gt;allow&lt;/string&gt;
        deny rule: this is always denied
        &lt;key&gt;com.apple.TestApp.dangerous&lt;/key&gt;
        &lt;string&gt;deny&lt;/string&gt;
        user rule: successful authentication as a user in the specified group(5) allows the associated right.
        The shared property specifies whether a credential generated on success is shared with other apps (i.e., those in the same "session"). This property defaults to false if not specified.
        The timeout property specifies the maximum age of a (cached/shared) credential accepted for this rule.
        The allow-root property specifies whether a right should be allowed automatically if the requesting process is running with uid == 0.  This defaults to false if not specified.
        See remaining rules for examples.
        </string>
        <key>rights</key>
        <dict>
        <key></key>
        <dict>
        <key>class</key>
        <string>rule</string>
        <key>comment</key>
        ...and 1850 more line(s)
    Contents of /private/etc/authorization.deprecated
        - mod date: Sep 30 13:39:21 2013
        - checksum: 2773682028
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>comment</key>
        <string>The name of the requested right is matched against the keys.  An exact match has priority, otherwise the longest match from the start is used. Note that the right will only match wildcard rules (ending in a ".") during this reduction.
        allow rule: this is always allowed
        &lt;key&gt;com.apple.TestApp.benign&lt;/key&gt;
        &lt;string&gt;allow&lt;/string&gt;
        deny rule: this is always denied
        &lt;key&gt;com.apple.TestApp.dangerous&lt;/key&gt;
        &lt;string&gt;deny&lt;/string&gt;
        user rule: successful authentication as a user in the specified group(5) allows the associated right.
        The shared property specifies whether a credential generated on success is shared with other apps (i.e., those in the same "session"). This property defaults to false if not specified.
        The timeout property specifies the maximum age of a (cached/shared) credential accepted for this rule.
        The allow-root property specifies whether a right should be allowed automatically if the requesting process is running with uid == 0.  This defaults to false if not specified.
        See remaining rules for examples.
        </string>
        <key>rights</key>
        <dict>
        <key></key>
        <dict>
        <key>class</key>
        <string>rule</string>
        <key>comment</key>
        ...and 9729 more line(s)
    Contents of /private/etc/ssh_config
        - mod date: Oct  1 12:06:10 2012
        - checksum: 1281775184
         Host *
           SendEnv LANG LC_*
        Host *
            XAuthLocation /opt/X11/bin/xauth
    Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist
        - mod date: Aug 21 15:00:01 2010
        - checksum: 2170691092
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.adobe.ARM.UUID</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/Adobe Reader 9/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StartInterval</key>
        <integer>12600</integer>
        </dict>
        </plist>
    Contents of Library/LaunchAgents/com.amazon.cloud-player.plist
        - mod date: Feb 22 10:43:22 2014
        - checksum: 2707474481
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>EnableTransactions</key>
        <false/>
        <key>KeepAlive</key>
        <true/>
        <key>Label</key>
        <string>com.amazon.cloud-player</string>
        <key>Program</key>
        <string>/Applications/Amazon Cloud Player.app/Contents/MacOS/Amazon Music Helper</string>
        <key>RunAtLoad</key>
        <true/>
        </dict>
        </plist>
    Contents of Library/LaunchAgents/com.amazon.music.plist
        - mod date: Jan 12 15:51:16 2015
        - checksum: 3668832669
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>EnableTransactions</key>
        <false/>
        <key>KeepAlive</key>
        <true/>
        <key>Label</key>
        <string>com.amazon.music</string>
        <key>Program</key>
        <string>/Applications/Amazon Music.app/Contents/MacOS/Amazon Music Helper</string>
        <key>RunAtLoad</key>
        <true/>
        </dict>
        </plist>
    Contents of Library/LaunchAgents/com.apple.FolderActions.folders.plist
        - mod date: Feb 17 09:08:58 2015
        - checksum: 1189540302
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.apple.FolderActions.folders</string>
        <key>Program</key>
        <string>/usr/bin/osascript</string>
        <key>ProgramArguments</key>
        <array>
        <string>osascript</string>
        <string>-e</string>
        <string>tell application "Folder Actions Dispatcher" to tick</string>
        </array>
        <key>WatchPaths</key>
        <array/>
        </dict>
        </plist>
    Contents of Library/LaunchAgents/com.apple.SafariBookmarksSyncer.plist
        - mod date: Jul 31 12:13:01 2010
        - checksum: 2859079559
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.apple.Safari</string>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/Safari.app/Contents/SafariSyncClient.app/Contents/MacOS/S afariSyncClient</string>
        <string>--sync</string>
        <string>com.apple.Safari</string>
        <string>--entitynames</string>
        <string>com.apple.bookmarks.Bookmark,com.apple.bookmarks.Folder</string>
        </array>
        <key>RunAtLoad</key>
        <false/>
        <key>ThrottleInterval</key>
        <integer>60</integer>
        <key>WatchPaths</key>
        <array>
        <string>/Users/USER/Library/Safari/Bookmarks.plist</string>
        </array>
        </dict>
        ...and 1 more line(s)
    Contents of Library/LaunchAgents/com.microsoft.LaunchAgent.SyncServicesAgent.plist
        - mod date: Feb 17 01:22:03 2015

  • I am new with iMac and I am trying to copy some file from my external HDD but it does not let me also I can't delete anything from this HDD using the finder. Can somebody help me , please?

    I am new with iMac and I am trying to copy some file from my external HDD that a used with my PC but it does not let me also I can't delete anything from this HDD using the finder. Can somebody help me , please?

    No, unfortunately, when you format a drive, it will erase all the contents. So you will need to find a temporary "storage" place to put the stuff using a PC so you have access to it. Then reformat using Disk Utility (Applications > Utilities). If only using with mac, format Mac OS Extended (Journaled) and use GUID Partition scheme under Partitions/Options. After formatting, you can drag the files back.

  • I need to use my iMac to run some Windows software and was thinking of using Parallels Desktop 9 to help with this. Do you still have to partition your drive with Parallels and does this leave you open to viruses?

    I need to use my iMac to run some Windows software not available for Mac and was thinking of obtaining Parrallels Desktop 9 to help with this. If I use Parrallels do you still have to partitian your drive and does this leave you open to viruses?

    You do not have to partition your drive - Parallels creates a disk image which contains your Windows installation. You do have to exercise anti-virus measures in the Windows partition, although such malware cannot affect the Mac filesystem.
    Matt

  • HOW DO YOU GUYS DEAL WITH APPLE.. SO CONFUSING...NEED HELP WITH SPECS FOR PURCHASE OF IMAC 21.5

    Hi guys, been reading your forums, blogposts, etc and am getting more confused.  I'm just a video girl trying to produce meaningful content through web videos for small to mid sized businesses and want to come over from the dark side. 
    Good news,, I dont need a super giant system,  I do simple editing for web videos, minimal graphics, no motion graphics, no animation etc. currently using CS4, will probably end up with 5.5.
    I want to get imac 21.5 or 27 if i have to..  So here's the question we all have,,, what do I really need besides an Apple fairy godmother to figure this crazy stuff out?????
    I want to be able to have firewire add on, but the rest is what I need help with.   So i've been looking at cs6 specs, even though im not there yet, eventually will be,, so just need to run cs4 now and build from there.  I also want to eventually move to final cut down the road so I want imac able to upgrade to final cut.
    WHAT DO I REALLY NEED MINIMALLY FOR NOW?  WHAT CAN I GET LATER IF i CHOOSE TO DO MORE AND NEED MORE POWER?
    cs6:
    Multicore Intel processor with 64-bit support
    Mac OS X v10.6.8, v10.7, or v10.8**
    4GB of RAM (8GB recommended)
    4GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
    Additional disk space required for preview files and other working files (10GB recommended)
    1280x900 display
    7200 RPM hard drive (multiple fast disk drives, preferably RAID 0 configured, recommended)
    OpenGL 2.0–capable system
    DVD-ROM drive compatible with dual-layer DVDs (SuperDrive for burning DVDs; Blu-ray burner for creating Blu-ray Disc media)
    QuickTime 7.6.6 software required for QuickTime features
    Optional: Adobe-certified GPU card for GPU-accelerated performance
    Any responses would be great.  I know you guys are busy answering the really high end tech questions

    All the current iMac models (both 21.5" and 27" with OS X Mt. Lion 10.8) will run CS4, 5.5 and 6 just fine.  They will also run Final Cut Pro X just fine.  Ditto for most any application you may want to use.
    Below are some notes (specific to your apparent requirements) that may help you with your purchase decision:
    Notes on purchasing a 21.5" iMac
    All 21.5" iMacs come with 8GB RAM but you cannot add more later.  I strongly suggest getting the maximum RAM (16GB) when you order the iMac.
    The basic hard drive is a 1TB 5400rpm drive.  It will work fine with Adobe CS but you will probably want the added speed of the optional 1TB Fusion drive for better performance. Some people will recommend/argue for one of the optional SSD drives instead, but they are very expensive and still only come in relatively small capacities - I don't recommend the SSD drives.  Get the Fusion drive and spend any extra money on a good external hard drive for backup and/or extra storage instead of an SSD.
    Notes on purchasing a 27" iMac
    All 27" iMacs come with 8GB RAM and you can add more later, up to 32GB
    The basic hard drive is a 1TB 7200rpm drive - it will be fine with Adobe CS.  There are upgrade options to a 3TB 7200rpm drive or a 1TB or 3TB fusion drive - these will be fine also.  There are also SSD drive options, but I do not recommend them. (Same comments as above.)
    Notes on all the current iMacs
    iMacs no longer come with built-in CD/DVD drives.  If you need one, you will need to purchase the Apple Superdrive accessory drive ($79)
    All of the iMac graphic processors (GPU's) are compatible with Adobe CS 4, 5.5, 6
    It is very difficult to impossible to change or upgrade the hard drive later on, so don't buy low-end thinking you can add a better internal hard drive later.
    Be aware that Macs always come with the latest (most recent) version of OS X.  And OS X Mavericks (10.9) is due to be released soon (in the next month or two).  There is no guarantee that the older Adobe CS 4 or 5.5 versions will run on OS X Mavericks.  If you cannot upgrade to CS 6 in the near future, you may want to purchase now rather than after OS X Mavericks is released.
    For what it's worth, I'd recommend the 27" iMac if your budget can afford it.  You will appreciate the larger screen size and added capabilities over the years you will use the computer.

  • Please can anyone help with the continuing password rejection problem with email.Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

    Please can anyone help with the continuing password rejection problem with email on my imac.My Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

    I use free Yahoo mail webMail access because folders I created in webmail access doesn't get set up in Apple Mail. While I was searching for post about password and keychain issues, I stumbled on several threads that complain about Mail folder issues, so I'm holding off on Apple Mail.
    On the password and keychain issue that your post is all about.  I've been using login keychain to save and automatical fill my login screens for a year or so successfully, with Safari and Chrome. Automatic form fill also works for Facebook login. Unfortunately, about 4 to 6 months ago, automatic password form fill stopped working with Yahoo webmail, while still worked for GMail (Safari and Chrome). I tried deleting the password entry for my two Yahoo email accounts to start fresh, but neither Safari not Chrome will even ask me if I want to save the password. I was so frustrated that I eventually installed the keypassX 0.43 (password manager) that is quite primitive sompare to OS X's keychain (when it works). Probably no surprise to you yet.
    The surprise, to me at least, is that, for whatever reason, password auto form-fill from keychain started working again for Yahoo webmail login on Safari about 5-7 days ago. Still doesn't work on Chrome!
    Two tips I can share, at least with webmail access:
    1. Password is save only for one of my yahoo mail accounts. When I login in with my other yahoo account, I get no prompt to save the password, and form fill doesn't work when I try to log in a second time with my other Yahoo mail account.
    2. On inspection of my login keychain, I see a webform password item saved for my Yahoo account that works with keychain. The name of the password is: login.yahoo.com(MyAccountName1#). When I open the password item and look in the Access Control tab, I see Safari and Chome are listed as allowed to access this password item..
         I also an "Internet password" item with a name of just login.yahoo.com. When I open the the password item, it looks just like the password item created for MyAccountName#1, but the MyAccountName#2 is listed in the Account field. Inside the Access Control tab, no apps are listed in access permission. I added Safari and Chrome to the lists of allowed app, saved the password item.
    Now when I bring up the Yahoo login page(by bookmark) on Safari, form fill fills in MyAccountname#1 for name and the proper password and I can login in. When I change the name to MyAccountName#2, the correct password is retrieved and I can log in! Alas, it still doesn't work on Chrome.
    BTW, I changed the password item type from "Internet password" to "Web Form password" and saw no difference! I also edited the name to be "login.yahoo.com (MyAccountName#2)" to look like the web form password item that works, but it has no effect either.
    From my experimentation, here's my observation:
    1. A Web Form password item is created for the first account name(MyAccountName#1) for login.yahoo.com and typed as Web Form password. When I log in using MyAccountName#2, an Internet Password is created, but no applications are listed as allowed to access the password item, even when the password item was created after just logged in and logged out to yahoo with the account name and password for MyAccountName#2.
    2. Manually adding Safari as an app that is allowed to use the password item works. Doesn't work with Chrome!
    The version of Safari I'm using is Version 5.1.7 (6534.57.2). My installed version of Chrome is Version 21.0.1180.79 beta.

Maybe you are looking for

  • Does Installing ios6 on iPhone 4 enables Siri?

    Does Installing ios6 on iPhone 4 enables Siri?

  • External HD suddenly disappear via Airport Extreme

    Hello.. This problem just occurred yesterday and I have tried everything that I've known of.... I'm using MacBook Pro  OS X 10.6.8, Airport Extreme 4th Gen,  and GoFlex Desk 3TB The ExHD used to appeared under shared on Finder for about a year alread

  • Changing the owner to multiples files...

    Hello, How Can I change the owner to multiples files. Now I am doing this one by one with properties option (webui). Win2000 iFS 9.0.1 Thanks a lot, Sandra

  • Time sync monitor for all windows member servers

    How to monitor time sync issue on all the member servers and domain controllers.  Can we monitor through scom 2007 r2.  Specially we need an alert when all the member servers are not in time sync. B John

  • E5 has no Hotmail notification tone

    Hi there, I've just set up my E5 with a hotmail email account and, despite receiving emails OK and showing the quantity unread in the inbox via the Standby (home) screen, I get no tone or aural notification. In my settings I have the email tone set a