Help with Install of Web Preimum Suite

I have a copy of Creative Suite 4 Web Premium that was on a computer that went belly up.
Now want to reinstall same on another older computer that has Windows Vista Operating System.
When I try to do so I get an error message that says the installation program is corrupted and to call Adobe.  I have be in line for a "live chat" for an hour so far but not live person there to chat with me... so I thought I would try this forum to see if anybody out there has a solution.
I have the original CD/DVDs 
This is an upgraded version and I also have the original CD/DVDs for the Suite 3 version but it also gets the same error message...
Suggestions?
Sarge

Run the Creative Cloud Cleaner Tool and try again. and by all means make sure to run with admin privileges and turn off security stuff. Corrupt install warning almost always come down to the installer not being able to access files due to restrictions.
Mylenium

Similar Messages

  • Installing Elements 11 on Mac. Need help with install error "Setup wants to make changes."

    Installing Elements 11 on Mac 10.8.2. Need help with install error:  Setup wants to make changes. Type your password to allow this."  After entering Adobe password, nothing happens.  Locked from further installation.  Any ideas?  Adobe phone support could not help.

    Just before letting changes (installation in this case) be made on the system, Mac OS prompts for password & this has to be the Mac system password. This password prompt is the system's own native prompt & would accept the system password only. Please make sure it is the right system password (all/admin rights) and the installaion should run.

  • Help with installing 10.6.3

    Hello, I'm looking for a bit of help with installing Mac OS X 10.6.3 without screwing up.
    I currently have a Macbook with 10.6.3 on it, and I want to COMPLETELY reset my Mac. I want to have a pretty much brand new Mac with 10.6.3, which I have the disk for. I actually just updated from 10.5.8, hoping that it would erase my hard drive and re-install, but it didn't. So I would like help with how to completely reset my Mac, and re-install 10.6.3.
    Thanks in advance!
    ~Dan

    Use that disk, but after booting from it and before running the install, choose Disk Utility from the Utilities menu and erase the drive.
    (75462)

  • Hello  I need your help with installing the flash drive into my laptop

    Hi
    I am Rachel Friedman asking for your help with installing the flashdrive player into my laptop.
    Thanks
    Rachel

    To give you any useful advice, I'm going to need to know more about your computer and browser:
    https://forums.adobe.com/message/5249945#5249945

  • MOVED: help with installing 2 os on one hd

    This topic has been moved to Operating Systems.
    help with installing 2 os on one hd

    RedMoose:
    Congratulations on installing an upgraded HDD into your PowerBook.
    I am not sure exactly what happened in the formatting process, but here are some directions that should help:
    Formatting, Partitioning Zeroing a Hard Disk Drive
    Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
    Boot from the install CD holding down the "C" key.
    Select language
    Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
    Select your HDD (manufacturer ID) in left side bar.
    Select Partition tab in main panel. (You are about to create a single partition volume.)
    Select number of partition in pull-down menu above Volume diagram.
    (Note: 1 partition is normally better for an internal HDD. External HDDs usually have more than one. See Dr. Smoke’s FAQ Backup and Recovery for tips on partitioning external HDD.)
    Type in name in Name field (usually Macintosh HD)
    Select Volume Format as Mac OS Extended (Journaled)
    Click Partition button at bottom of panel.
    Select Erase tab
    Optional: (Select the sub-volume under Manufacturer ID (usually Macintosh HD).
    Check to be sure your Volume Name and Volume Format are correct.
    Select on Security Options button (Tiger) Options button (Panther & earlier).
    Select Zero all data. (This process will map out bad blocks on your HDD. However, it could take several hours. If you want a quicker method, don't go to Security Options and just click the Erase button.)
    Click OK.
    Click Erase button
    Quit Disk Utility.
    Open installer and begin installation process.
    Please post back with further questions, comments or an update.
    Good luck.
    corneius

  • Need help with upgrade from Adobe Creative Suite to PS CS4

    My old laptop with Photoshop on it crashed and I ended up purchasing a new laptop.
    I'm trying to reload my PS CS4.  I am using an upgrade from an educational Adobe Creative Suite Premium to the CS4 and when I loaded it on my old laptop I had to get installation help through customer service, but now customer service will not help me since it is CS4.
    When installing the upgrade, it tell me to select the product I already own.  I own the educational full creative suite, but am only upgrading the Photoshop.  I chose Photoshop CS and tried entering the serial number for the suite.  It tells me that the serial number doesn't match the product chosen.  Of course the only products I'm allowed to choose from is Photoshop CS, CS2, or CS3 and not Creative Suite Premium.
    The other serial numbers on this CS is Golive CO and Pagemaker Plug-in.
    I was told there are Adobe customer service reps here on the forum, please tell me what it was I need to do to get my Photoshop installed.
    Thanks

    i wasn't aware that you could get a ps4 at an upgrade price using an older creative suite produect.  i searched online and found this thread (http://forums.adobe.com/thread/476009) which makes it appear that was not a valid upgrade path.
    but, if you're confident that was a valid upgrade path, i'm pretty sure something will need to be done on adobe's end and no amount of manipulation, on your end only, will work.
    your best bet would be to get help in this forum from an adobe staff member like jeff wright who is very knowledgeable and goes out of his way to help adobe customers.  to that end, if i were you, i would start a new thread mentioning his name in your title and in your initial post explaining:
    you have the educational Adobe Creative Suite Premium and purchased a photoshop cs4 upgrade years ago that required adobe support help to install years ago. 
    that worked well until a recent computer problem forced you buy a new laptop and you are now trying to reinstall that ps cs4 and again need support help but have been refused help because cs4 is not current.

  • Help with installing CS3 on new Mac

    Recently purchased new Macs for the department. Cannot install CS3! It asks for the CS2 license number which we have. Turns out it doesn't recognize it. Called customer support and everyone had the same answer, but no solution. I purchased the CS2 corporate license when we had about 6 Macs. Now, we're down to 3 so I purchased the CS3 as individual suites. They said there is no workaround with getting CS3 to recognize the CS2 license! We called 4 different times and talked to 4 different reps who gave us all the same broken-record response. Any help with be greatly appreciated!

    I believe that is essential what the customer service folks were telling my designer. However, both was installed before on the old Macs (CS2 corporate licensed and CS3 individual license) - that's the odd thing, is that it worked before on an older system. All we did was buy new hardware.
    I hope this isn't Adobe's way of making us upgrade to CS4 - lol!

  • Help with install of trial version Dreamweaver CS6

    I can't launch the app'. Has anyone else noted a problem with mfc100.dll file? (The message returned when I try to launch DW points to this as being the problem.)  I've tried reinstalling it but the same thing occurs. To test, and make sure it wasn't my computer or my error,  I also downloaded Muse, which works fine.
    Any help is much appreciated -- eager to use DWCS6.
    Thanks!

    Have you ever utilized Dreamweaver successfully on this computer?  If not then please review your installation logs to determine if you received an error during the install process.  You can find details on how to locate and interpret the installation logs at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

  • Help with Installing flash error- metafile cannot be loaded

    I read the forum on this but it ended last year and there was no response to some recent questions on this and the direct email to the Adobe rep. on there got no response.
    I am having this problem with installing Flash- it gets about 30% of the way and then a message comes up that says the metafile cannot be loaded.
    I am running 10.7.5 on Mac, all browser software is current. I use both Safari and Chrome. After it said Flash was out of date I tried to update but got the metafile error. So I uninstalled Flash to install it fresh but the same error came up. I tried everything recommended from the forum. I also did all the steps from the help list direct from Adobe ( deleting Flash files, folders, rebooting, etc.) The offline link Adobe provides says the "file cannot be found" so I can't download that either. So I tried the online link download, but even after doing all the steps in order etc. I still get the error when I try to install it.
    I have no firewall and have no virus software running. I also tried the direct offline links that others have provided from 2013, (unfortunately they are old)  in both clicking on them and also downloading by right click but they are dead links and even  the download for it has no content.
    Any help that is more recent than last year? If this is in the wrong place, apologies. New to the forum.

    I tried all solutions but one posted in adobe support. I am local administrator but IE security settings are set by group policies and buttons in tools security setting are grayed out.
    After three days with "The ActiveX control for Flash Player could not be registered" message I tried registering the activeX control manually.
    Bingo! that made the trick.
    So open a DOS window, type "regsvr32.exe C:\WINDOWS\system32\Macromed\Flash\Flash10d.ocx" -first check if this directory exists and contains the Flash10d.ocx (no quotes needed) and you should receive a confirmation that it registered correctly.
    I must say that I've tried so many ways that I cannot repeat the correct order before this has worked ;-(
    Hope it works for you all

  • Urgent help with nokia 5230 and ovi suite

    translated from Spanish to English translator by gogle
    I need help because my nokia 5230 I can not install applications from nokia ovi suite because it is not clear that anything the phone as you ago
    I can sync
    I can send things to your suite ovi
    ovi suite but I can not to your urgent assistance
    Solved!
    Go to Solution.

    English
    I need help because I can not install applications to your suite ovi
    maybe it's because you delete the folder or lake and private
    español
    Post edited by Moderator. We would like to remind you that posts should be written in english as the board supports english language only. The board supports English language only as per guidelines.

  • Help with using a web page from disk after saved from web

    Hi, I almost forgot the little I learned about web page development, so, I'm a total noob when it comes to this and I need your help.
    I saved as a complete web page on my hard disk this web page but when I open it in Firefox or IE, it doesn't display as much as I need it. I'm mostly interested  in displaying the logo images as they appear on the original web page. The browsers just show them briefly when refreshing but hide them right away. I can see the image files downloaded to my hard drive and if I open the page in Dreamweaver it displays these images  in the preview pane but I can't make them show in the browsers. From Dreamweaver I saved the page as in the folder where the images are and this also updated the code with the relative image links but the browsers still don't show them.
    I will greatly appreciate your help with this.

    I'm sorry, but your post is very confusing
    I saved as a complete web page on my hard disk this web page
    Does this include site definitions?
    when I open it in Firefox or IE, it doesn't display as much as I need it.
    I dont know what this means...are there images that are not being displayed?  Is there styling that is not being rendered?
    . I'm mostly interested  in displaying the logo images as they appear on the original web page. The browsers just show them briefly when refreshing but hide them right away.
    Again, I dont know what this means?
    I can see the image files downloaded to my hard drive and if I open the page in Dreamweaver it displays these images  in the preview pane but I can't make them show in the browsers. From Dreamweaver I saved the page as in the folder where the images are and this also updated the code with the relative image links but the browsers still don't show them.I will greatly appreciate your help with this.
    Do you have a link to the page, and perhaps some explanation that is more clear as to what your issue is.
    Gary

  • Help with installing pre-requisite packages on Red Hat Linux

    Having issue with installing packages with yum
    OS is RHEL 6 and following package which are prerequisites for Oracle Fusion Middleware install on Red Hat Linux 6
    uname details as follows
    2.6.32-220.el6.x86_64 #1 SMP Wed Nov 9 08:03:13 EST 2011 x86_64 x86_64 x86_64 GNU/Linux
    Example error: yum install gives error as follows for all packages.
    No package compat-libcap1-1.10-1 available
    Need to install following packages (as mentioned in the prerequisites)
    binutils-2.20.51.0.2-5.28.el6
    compat-libcap1-1.10-1
    compat-libstdc++-33-3.2.3-69.el6 for x86_64
    compat-libstdc++-33-3.2.3-69.el6 for i686
    gcc-4.4.4-13.el6
    gcc-c++-4.4.4-13.el6
    glibc-2.12-1.7.el6 for x86_64
    glibc-2.12-1.7.el6 for i686
    glibc-devel-2.12-1.7.el6 for i686
    libaio-0.3.107-10.el6
    libaio-devel-0.3.107-10.el6
    libgcc-4.4.4-13.el6
    libstdc++-4.4.4-13.el6 for x86_64
    libstdc++-4.4.4-13.el6 for i686
    libstdc++-devel-4.4.4-13.el6
    libXext for i686
    libXtst for i686
    FYI: If this forum is not appropriate please let me know appropriate forum and shall repost there.

    Hey,
    Normally I use YUM : http://taliphakanozturken.wordpress.com/2012/03/17/how-to-use-yum-to-install-rpm-packages-with-dependencies/
    Let me know if this is what are you looking for.
    I hope it helps you,
    Thiago Leoncio.

  • Help with installing CS2 in Snow Leopard

    Can anyone help me with installing CS2 on a MacBook running OSX Snow Leopard? I have trouble with activating the product and get a splach screen with a monkey element or  logo rather than the adobe logos... confusion reigns!

    Hi Rory, be aware that running CS2 products on Snow Leopard isn't going to be a supported combination. Here's a related thread: http://forums.adobe.com/thread/499253. Apparently some customers have been able to run CS2 software on Snow Leopard. You can also check with our chat support at http://adobe.ly/v6wfLL. However, I can't be certain that they'll be able to assist you. You might want to consider upgrading.

  • Need help with installing old version of firmware

    I would like to revert to an old version of firmware for my Airport Extreme base station. I have read in a number of postings that this would possibly help with the problem of my Canon Pixma ip3000 not working after the firmware was usdated. When I tried to install the old firmware, the Installer would not allow it, there was just a message that the software was up to date. Could anyone please give a step by step description of how this can be done? Is there a way around the Installer? Thanks.

    The firmware supplied with the base station was 4.1. After installing it, everything worked just fine, including wireless printing to a Canon Pixma ip3000. At one point, after being prompted by a message onscreen to upgrade to 4.2, I did the download and installation, and that is when all the problems started. No wireless printing, and I can't seem to use the Airport Admin or Assistant (not responding). Since then I have also upgraded the OS to 10.4.5.
    I am trying to downgrade to 4.1 since that is what worked initially and what was suggested in another posting I read.
    I did look at the information for the various parts of Airport and noticed that the Setup Asistant is 4.2, the Admin Utility is 4.2 and the base station is 5.5.1. Could this be affecting the problem as well?
    I will try downgrading using the link you provided. Thanks very much.

  • Need help with installing on Photosmart C7280 all-in-one

    I did have my printer installed, and was using the printer for 3 laptops wireless within my home.  Now I can not even find my Backup disk, so i need help with downloading the software to use my printer, and also get it back to being used wireless.   I do not know what happened, but the fax for this printer is listed, just not the printer itself.   please help!
    This question was solved.
    View Solution.

    Click here to download the software for your printer:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3204785&lc=en&cc=us&dlc=en&lang=en&cc=us
    chose the appropriate operating system that corresponds to your computer and download the full feature software.
    Please click on KUDOS if you find my solution helpful.

Maybe you are looking for