Help with internet cam and ports

I have a Linksys WVC54GCA wireless Internet cam. I have set the IP to a static address. Created a DDNs account and have the address. I can see the site/cam on any computer on my network but cant seem to get it to port forward out . Help from anyone would be great. Thanks

That is strange, because.
Earlier when you posted what your domain was, I went to http://network-tools.com/
and entered that domain name, you where ping-able / traceroute-able / I could find out the correct public IP and ISP address behind that domain.
But now, I can not see the correct IP address.
Now I am starting to wonder about what is going on..
I think know what was going on, why you could not connect to your self by public IP.
Auth failed, solve that first. Then I will tell you what to do..
That means...
While I don't use the same DDNS provider: Make sure that, you:
#1 Are not running any DDNS client on the computer too. That, I, suspect will cause that issue.
Run the DDNS client either on the router (if the router supports it) or on a computer behind that router.
#2 You enter in the correct user name and password ( "password" is not the same as "Password" )
Message Edited by dslr595148 on 10-21-2008 03:20 PM
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Similar Messages

Terrible customer service, and no help with defective camera

Madams and Sirs,
This camera (see below) was a Christmas present, and we discovered first last week that it had a manufacturing defect. (one of the small tabs holding the case half together got installed in a pinched way.)
Best Buy has always had fantastic customer service, and we have been very happy. We have spend many thousand dollars in your store every year. So we were sure the store would have a solution.
We took it in to your store #1423 on Curtner in San Jose to try to exchange or replace under warranty.
I understand you sometimes you are not able to help a customer, but this email is first about the shock I got when I spoke with Megan in customer service.
As many customers in Silicon Valley, I am an engineering manager, and we have performed destructive testing on many of our own products. The defect on this camera is obviously a manufacturing defect, and not possible to be caused by poor handling. This is very obvious.
Megan told me with other employees as well as my son listening next to me that I was a liar, and that the damage was caused by abuse, and not a defect. I tried to explain that was not possible, and she interrupted me, and again said that i was not telling the truth, and that the assembly error was caused by us.
I then asked if it was possible to have the matter reviewed by the store manager, and she responded she was the store manager.
I left with the camera, and the matter unresolved, and had to explain to my son that I was not a liar, and that Megan must be wrong and "some people just have a bad day sometimes".
I will not be spoken to with insults like that, and I can no longer go to your store with my kids, and if my employees treated any customer the way Megan did, I would make sure she received training to correct this. If the store manager have this attitude to customers, the entire organisation usually follows, and I will not be a customer in a store like that.
1. Please help resolve this issue.Order number: {removed per forum guidelines}

Hello erikev,
Cameras are nice to have, especially with young children, so I can imagine how frustrating it can be to find yourself with a pinched casing. When something goes wrong, it’s never a fun situation, and while it may not be something we can necessarily help with, great customer service should still be provided. It sounds like this didn’t happen the way we hoped, and I’m sorry this was at your expense.
As this situation is definitely concerning, I looked into your account to see how I might be able to assist. However, I have found your concerns have reached Terrance with our executive support team. He is currently looking into your situation and should contact you once more information is available. From here, Terrance will be your first point of contact.
Hopefully he can find a good resolution for you,
Alex|Social Media Specialist | Best Buy® Corporate
Private Message

TS2771 I need help with my camera it's shows a black screen. And I have restarted it many times

I need help with my camera it's shows a black screen. And I have restarted it many times

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. Y are not alones. Sometimes the camera fails.
Apple Retail Store - Genius Bar

On holidays we took pictures with two cameras and an iPad. I put everithing on my PC. Rearranged them by date, time and or subject putting a number in front of the picture name. I synchronised with my iPad and my pictures show in misselaneous order. Help

We took pictures during oue holidays with two cameras and an iPad. I put all the pictures on my PC and reorganized them by date, time and/or subject, By putting a number in front of the picture name. Then I synced with my iPad. All the pictures show in a misselaneous order. What went or did I wrong?

You did nothing wrong, but the photo app puts stuff in chronological order.
You can look for another app. Afraid I don't have one to suggest, but I do understand that other apps will sort photos differently.

Problem with Nokia Camera and Smart Sequence

Hi,
I'm having a problem with Nokia Camera and the Smart Sequence mode.
Basically, if you take a picture using nokia camera, and view it in your camera roll, it usually says, underneath the pic "open in nokia camera".
Well, if I take a pic using the Smart Sequence mode, it just doesn't say "open in nokia camera" so, to use the functions of smart sequence (best shot, motion focus, etc), I have to open nokia camera, go to settings and tap the "Find photos and videos shot with nokia camera" option.
Does anyone has the same problem? Anybody solved it?
I already tried reinstalling nokia camera, but that didn't help.
I'm running Nokia Black on my 925.
Thanks everyone!

Hi,
I had the same problem with my 1020. It did get fixed with the last update to Nokia camera.
However, IIRC, it didn't just happen right away. When browsing the camera roll I'm pretty sure that the "open with Nokia camera" text wasn't there.
Slightly disappointed I opened the (Nokia) camera anyway and was going to test the smart sequence again. I noticed the only precious pic I'd taken using this actually appeared top left of the screen.
I opened it and I had all the smart sequence editing options again - that we're missing previous. Made a new picture and saved it.
Now when in camera roll the text shows below the image and all is good.
This probably doesn't help much except that it didn't seem to fix automatically.
I work @Nokia so I can ask around a bit to see if this is a known / common issue (not that I know any developers)

Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

That's what I would have thought, but even after saving the setting, as soon as I shut down my computer or log out of Mail, it automatically defaults back to 25. It's a bit frustrating.
Now I just need to figure out how to get rid of those horrible pop-up banners but still have my glass sound and number of emails in the red dot when I get an email...
These little tweaks are the only thing I HATE about upgrading my OS.

HT4623 my IPod Touch is a generation 3 with a camera and when i go into my settings and try to do what the instructions on your website say but in general i only have About and then the rest of the bars but i don't have one that says Software Update

my Ipod Touch is a generation 3 with a camera and when i go into the settings to look for the Software Update bar i don't have one

If you have cameras then you have 4G iPod. To update connect to your computer and update via iTunes
iOS 4: Updating your device to iOS 5 or later
- A 4G to 6.1.5 Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later

Web Service Proxy with Dynamic IP and Port

hi,
I am currently looking at the Web Service Proxy generation in JDev 11g. I can generate proxies fine, but the proxies are generated with static host and port. I want to substitute the host and port during runtime if required, for instance read the values from a database. I need to do this to avoid compiling the application for every deployment we make dev, test and production. Is there an easy way to set the generated proxy host and port? Are there any examples?
Thanks in advance!
Stephen

Hi,
Maybe you should have a look on XML Catalogs feature, but I am not sure if JDeveloper support it and how to support it.
-LJ

If I have an iPad 1 with no camera, and I want to change it for an ipad 3 is true that if I give my ipad I get the cheapest ipad 3

if I have an iPad 1 with no camera, and I want to change it for an ipad 3 is true that if I give my ipad I get the cheapest ipad 3

Apple does not take trade-ins. In a few countries Apple does work with a company who will give you some return on an existing device; for the US, see:
http://www.apple.com/recycling/gift-card/
Similar programs are available in a few other countries, and some dealers may have their own trade-in programs. But you most probably can get more for your device if you sell it yourself, as Eric suggested.
Regards.

Need help with Blog, Wiki and Gallery

Hi Team,
Need help with Blog, Wiki and Gallery startup. I have newly started visiting forums and quite interested to contribute towards these areas also.
Please help.
Thanks,
Santosh Singh
Santosh Singh

Hello Santhosh,
Blog is for Microsoft employees only. However, you can contribute towards WIKI and GALLERY using the below links.
http://social.technet.microsoft.com/wiki/
http://gallery.technet.microsoft.com/

I have a 1 Hour shoot with 3 cameras and I

I have a 1 Hour shoot with 3 cameras and I need to make a dvd with chapters.
What is my best work flow?
1. Do I edit the whole thing at once and then save to file using compressor?
After that how do I burn a DVD with chapter marks?
2. Edit each section induvidually? Then save through compressor?
Then Compile and burn DVD?
Also what setting is best for DVD through compressor?
Sorry for all the questions but most of the stuff I do is online media.
Thank you,
Lego

If you can live with a very basic DVD menu, you can send your project to Compressor from FCP X, add chapter marks in Compressor, and burn a DVD right from Compressor.
Choose Share...DVD, then click on the Advanced tab and select Send to Compressor. In Compressor you can add markers in the Preview window and customize the DVD menu slightly (add a background image and a Title) using the Inspector settings.
If you need a fancier DVD menu, you'll need to use one of the other DVD authoring tools that Tom mentioned.

What's the phone number I should call for help with my iPhone and ihome dock?

What's the phone number I should call for help with my iPhone and ihome dock?

http://www.ihomeaudio.com/support/

Help with photoshop quitting and AMD graphics

help with photoshop quitting and AMD graphics
im not a techy, but it appears i have to do someting with my amd graphics card - this might be why my software is crashing - ive no idea what to do though

Hi Chris
I have tried to go on the website, then i tried to download the automatic detect because i wasnt sure which driver i had or needed - but it has just downloaded a load of game software - which i dont want ( i dont think)
i have find out my laptop has a amd radeon HD 8750M card, but i dont know what im doing! i would hate to mess my computer up as i am in thailand with no one to help me!
its frustrating as i am paying for CC but cant use it!

Why my MacBook pro with Maverick, when I'm connected with internet key and connect with usb cable my HTC One the Mac restat with error?

Why my MacBook pro with Maverick, when I'm connected with internet key and connect with usb cable my HTC One the Mac restat with error?

Solution may be found if you search in the "More Like This" section over in the right column.

I log on with internet explorer and ican view videos from my att homepage , why can't i with firefox ?

I log on with internet explorer and i can go to select videos from my att homepage. When i log on with firefox and i go to the same videoes i can see the advertisement and then it tells me the video is no longer available. How can we fix this ?

This is a direct download link: [http://www.mozilla.com/products/download.html?product=firefox-4.0.1&os=win&lang=en-US Download Firefox 4.0.1] Download it to your desktop.
Just in case Firefox is still installed, please do the following.
Go to Add/Remove Programs in Windows Control Panel, scroll down to "Mozilla Firefox" and remove it, choosing to keep your bookmarks, customizations etc., (don't checkmark the box).
Then reboot and delete the folder called "Mozilla Firefox" at this location: C:\Program Files\Mozilla Firefox
Finally run the installation file you downloaded to the desktop earlier.
If you don't see Mozilla Firefox in Add/Remove Programs, then it's not installed.

Help with internet cam and ports

Similar Messages

Maybe you are looking for