Help with iPad interactivity in Indesign

Hi,
I am creating an iPad app and need some help with the interactivity. I have 4 buttons on my page and each one, when pressed, shows a new box of information which I have achieved using the object states. I have also created a menu in the form of a scrollable frame which scrolls in from the left of my page. This is however, where I have a problem - because the frame that I drew for the scrollable frame to be placed into covers two of my four buttons, these two buttons don't appear to be working. Does anyone know how I can resolve this or any way to work around this problem?
Many thanks,
Steph

Redesign the page and consider using an MSO for the menu instead of a
scrollable frame.

Similar Messages

Need help with Adobe Interactive Form Saving

Hi Gurus,
I need your help with Adobe Interactive form saving.
I have written the code in pre-save event to prompt a message when user didn't enter any value before saving. The form data should not be saved upon clicking save (Just prompt the message and exit form the form). Can u please advice me how to do this.
Regards,
Srini

see the link: http://forms.stefcameron.com/2008/04/
it says:
preSave: Failed validations will not prevent the form from being saved however Acrobat/Reader will issue a special warning message, after issuing the validation error message, to inform the user that the validations failed. Iu2019m guessing this is because the user may be saving the form to continue filling it at a later time so the save canu2019t be completely prevented.
regards,
BJagdishwar.

HT201210 cont contact apple server error please help with ipad touch 4. im just fed up with apple please help me because why is it only apple with these kind of problems?

cont contact apple server error please help with ipad touch 4. im just fed up with apple please help me because why is it only apple with these kind of problems?

If you mean updae server
Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem
Otherwise what server are you talking about

Help with Ipad 4 and bluetooth

Need help with Ipad / Bluetooth. I have Ipad 4. I have bluetooth hearingaids , a Bluetooth transmitter which I use to hear TV by using my " Bluetooth receiver" I can't hear the teaching at church. We have tried to connect my transmitter to our sound booth without success. Is there a way to get the pastors sermons via my Ipad to my hearing aids. ?? Thanks for the help,,,,Larry

Just what do yo mean by ". I tried to add a email but it won't send a verifying email."?
Have yo tried a couple of times?
Have yo looked in the accounts spam folder?
Try with another email address.
Last, contact iTunes
Apple - Support - iTunes - Contact Us

Help with numbering lists in Indesign CS5.5 for epub file

I am working with a book in Indesign CS5.5 to export it as an epub file. I have been working on formatting the text and I have run into a small problem. Throughout the book there are multiple lists within the texts that need to be numbered. Each list, however, must start over at number 1 and not be continued on from the previous list. The lists are all unrelated and I need them to be completely separate. I used "Type", "Bullets and Numbering", then "Apply Numbering" to begin with. This had each list in the correct order. However, I also created a paragraph style with the correct font, size, indentation, and spacing that must be applied to all the lists before exporting. When I do this, everything keeps its correct formatting except that some of the lists continue their numbering from the previous list. For example, on page 1 I might have a list of four things all formatted correctly and number 1 through 4. On page 3, I have another list, of completely unrelated items. I therefore would like this list to be started over at number 1, but when I apply the paragraph style to it, it starts at 5, picking up where the last list left off. I need to keep these as the assigned paragraph style but it messes up the numbering. If anyone could help me figure out how to keep this from happening I would greatly appreciate it!

If you don't mind cracking open the ePub and editing template.css, then adding rules like:
h2 {
page-break-before: always;
should force each paragraph whose style is mapped to an h2 tag on to a new page. Whether or not it works will depend on how good the ePub reader is at implementing CSS. It seems to work for Digital Editions and also Kindle, if you convert ePub to Kindle format.
This doesn't help at all if you are trying to force sections into separate XHTML files, though.

TS3274 Help with IPad

I need help with my iPad. I am on a page that I added to home screen (OpenAppMkt) and I needed to get out but the home button won't work, or even the power button. Holding the home button for 10 secs didn't work either, and yet I can invert colors.

RESET DEVICE
Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).

Help with Ipad (3rd gen) wifi

I have a problem with my Ipad where I'm unable to scroll across a video. For instance if im playing a video on youtube or iplayer, I'm unable to forward the video. I have restored the ipad through Itunes but has not resolved the issue. Any ideas why this is happening?

For the issue with Messages, try this. Settings>Messages>Show Subject Field>Off. Then try typing and sending a message.
Did you restore as new? You didn't say if you did or not? I don't think this is going to help with the video scrubbing but it doesn't hurt anything. Reboot your iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Help with iPad 2 wi-fi connection at home

Just got home with iPad 2 and trying to connect to wi-fi at home - when i click on my wi-fi a page comes up asking for DHCP BootP or Static and then IP Address - not sure what this is? Also at the bottom it then says HTTP Proxy - off, manual, auto. ?

Just got home with iPad 2 and trying to connect to wi-fi at home - when i click on my wi-fi a page comes up asking for DHCP BootP or Static and then IP Address - not sure what this is? Also at the bottom it then says HTTP Proxy - off, manual, auto. ?

Help with iPad update issue

Need help with update issue please

Please see your duplicate thread below for answer already provided.
https://discussions.apple.com/message/25940896#25940896

Urgent - help with Text direction in InDesign CS4

Hello,
I use InDesign CS4 on Windows 7. It's a standard version (without options for right-to-left languages).
Whenever I make a new text frame, it seems to have a right-to-left "logic" of the text. The text types left to right, but the period in the end would go all the way right.
It also mixes up tabs. It looks like this:
Instead of:
Usually I get around it by pasting another correctly formatted text-frame or text, and it works.
Now I'm trying to create a new document with master frame (in order to be able to easily change the layout successively of a many-paged document), where I need to insert existing (formatted) text. But this text take this "right to left logic", whether I past the text, or even a whole text frame.
I could find nothing in the character/paragraph options to get rid of this.
I would greatly appreciate if you could help me.
with respect,
Jerusalem Nun.

This behaviour is normal. Changing the default property of any style, when no document is open, changes the style for every new document, but not for existing document.
Take a look what is your basic style where all other styles are build up on it, in your case, go to the paragraph style and look what is the basic style which was used.
If the default style was used (it is the one in brackets), you have always a problem. You should not use it in any case.
Because you don't have a ME version of InDesign you can't change direction directly, but you can create a new document with the default settings and the same paragraph (and character, table and cell styles) in a new document without RTL styles. Save this document, no content is required.
Go to the 'infected' document, open the paragraph style panel and in the panel menu take "Load all text styles", select the new document and overwrite with the incoming styles.
If necessary you might repeat it with the Table, Cell, Character and Object Styles, as all of them have some kind of direction settings.
I don't know how good your styles were created, you have to adjust your document. And I would strongly recommend—I repeat—I strongly recommend to work always with styles.

Help with iPad Identifying Phone Numbers in iMessage Send & Receive Settings / iMessage Syncing Help - iOS 6 - iPhone - iPad

With iOS6, iPhone and iPad users will see that their Send & Receive iMessage settings have updated across their devices to be made available at both phone numbers and email addresses. You may have also seen alerts on one or more of your devices advising that another device is now using the same Apple ID/phone number for iMessage.
Being able to be reached on iMessage on both Apple ID and phone numbers across devices means that iMessage can keep the same thread and sync across devices.
Due to having 2 iPhones on different phone numbers running along side my iPad at one time, (whilst I was waiting for my phone number to be moved to a new provider), my iMessage settings on my iPad lost my phone number completely. I thought I would document the steps to recover this for anyone in the same boat.
1. Check that you are signed in with the same iCloud Account on both iPad and iPhone.
2. Turn off iMessage on your iPad from Settings > Messages.
3. On your iPhone, go to Settings > Messages > Send & Receive. You should see your phone number and your iCloud email address in the 'Your can be reached by iMessage at:' list. Make sure both are ticked.
4. At this point, I synced my iPhone with iTunes, then synced my iPad with iTunes.
5. On your iPad, turn iMessage back on - your phone number should now show in the 'You can be reached by iMessage at:' list. Tick the phone number. You should receive an alert on your iPhone.
This should resolve the issue.
With the above set up and with the iOS 6 updates, iMessage should now sync fine across devices however I have still found the most successful way to run iMessage is to always start new conversations from your Apple ID and to start new threads by addressing the first message to an Apple ID from an Apple ID.
To do this, go to Settings > iMessage > Send & Receive and tick your Apple ID in the 'Start new conversations from:' list, then start a new iMessage thread to the recipients Apple ID. This way, the thread will sync across iPad and iPhone. Note that a thread set up this way will not fall back on SMS, so you get a clean iMessage thread. This method also worked/works on iOS 5, as long as you send the first message of a new thread from an iPad (which can only send via Apple ID) to an Apple ID.
Hopefully this helped someone!

ipad has no phone number, you use a same email address for both devices. and set it in Settings>Messages>Send & Receive

Can someone help with my download of inDesign CS6?

We bought inDesign CS6 online, but it didn't come with a disk. Instead I was prompted to go to the following link http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
After downloading CS6 Design Standard (files 1 and 2), the larger of the two files was saved to my download folder as a 7Z file. The smaller file was the "extractor." I click on that and it gives me the folder location box, then I click next. At that point, the following message appears: "A problem occurred while extracting some files. Check available space on your computer and the write privileges on the destination folder" After click OK, this message appears: "A problem occurred while extracting the archive. Please try downloading the Adobe CS6 Design Standard again." After clicking OK, this is the last message that comes up: "Exception EListError in module DesginStandard_CS6_LS16exe at 0001B6E3. List index out of bounds (0)," accompanied by the dreaded red X.
This wasn't a cheap purchase. And my computer is only five months old, so memory shouldn't be an issue. Does anyone have any suggestions? For starters, an idea on how to open a 7Z file? Any and all help would be greatly appreciated. Thank you!
Dan

here are some, Best Free Download Manager
they should all have a 'resume' feature, but you should double check because it's the feature you really need.

Help with page set in indesign!!!

Hi I am trying to set up a 8.5 x 11 brochure with double sided pages. the pages will originally be 17 x 11 so i can fold them into the correct size. how do I go about setting this up? I know i need to print duplex with saddle stitch but when i try to set up the 17 x 11 pages in indesign it makes the whole booklet that length. help....

We need to be very clear about waht you mean by a "page" rather than the number of sheets on which this is going to be printed. If the brochure is one sheet of 11 x 17, printed on both sides and folded so it has 4 panels, then you can set it up as a two-page 11 x 17 document. I do it this way most of the time, and set the pages with two columns to make the margins at the gutter where it folds for convenience in layout. Side one (page 1 in the layout) would have the back cover on the left and the front cover onthe right, and side two (page 2 in your layout) would have the two inside "pages."
In theory you can set up a longer document this way, too, but it's so much work to remember the imposition pattern and such a hassle and prone to error to work this way instead of looking at the design as the readers see the finished product, that I would never do it for more pages. Setting up as 8.5 x 11 facing pages is fast, easy to work with, allows for changing the page count if necessary, and works for automatic page numbering, so it just makes more sense to do that if you will be printing more than one sheet of paper.

Help with Booklet printing in indesign

Hi I am trying to set up a 8.5 x 11 brochure with double sided pages. the pages will originally be 17 x 11 so i can fold them into the correct size. how do I go about setting this up? I know i need to print duplex with saddle stitch but when i try to set up the 17 x 11 pages in indesign it makes the whole booklet that length. help....
Message was edited by: Vikrant Rai: Updated the title

Setup your document at 8.5 X 11 and then to create a booklet, use the Booklet Printing feature (File > Print Booklet).
Details here: http://help.adobe.com/en_US/indesign/cs/using/WSa285fff53dea4f8617383751001ea8cb3f-704ba.h tml)

Help with an epub using indesign cs6

Hi there guys and gals I need some help trying to make an epub for my wives book. The problem is that my wifes book consist of pictures with the words in them. Im trying to make it so we can try and publish it. the problem is im not sure what the right formatting would be to use in indesign please feel free to message me on here with either videos or even links to information that possibly help.

Video: http://tv.adobe.com/watch/creative-suite-podcast-designers/how-to-maintain-formatting-when -exporting-your-epub-from-indesign-cs6/
Link: http://helpx.adobe.com/indesign/using/export-content-epub-cs6.html

Help with iPad interactivity in Indesign

Similar Messages

Maybe you are looking for