Help with iTouch sync new files after system restore

I just recently did a system restore on the iTouch, backed up my previous files & restored them to the iTouch with no problems however I am not able to sync the new apps, files, pod casts etc... that I purchased to the device after the erase & restore. But they are showing up on iTunes just not the iPod.
Thanks for any help,

I don't have an answer to your question, maybe someone else does.
What I did want to comment on, though, is that surely it was unnecessary to
uninstall a program to speed up your computer? It would have been sufficient
to leave it on your harddrive and not run it--that doesn't take up any RAM.
It won't slow up your computer unless it has some components in the startup
folder.
Ariel

Similar Messages

  • Missing file after system restore

    Dear Sir,
    today i performed on a tecra M2 a system restore, but suddenly the message came that i had to re-install the following file : <windows root>\system32\ntoskrnl.exe :
    how do i do that : put in the recovery cd or just do a format of the disk with the recover cd ?
    thanks in advance
    drweekx

    Hi,
    System restore is very helpful tools but it's not the magic bullet! :-)
    Your file "ntoskrnl.exe" seems to be damaged and this file is very important for you OS!
    You can try to start up the notebook and press "F8" key. Then you will enter a menu and you can choose the " Last known good configuration" and the VGA Mode.
    If you have luck your notebook works after that else you only can recover the whole notebook! But if you have important data on the NB you should safe it to an external disk!
    Bye Chris

  • After system restore i reinstalled firefox, how to get back bookmarks etc with old firefox data?

    After system restore the only thing i have is old firefox data on desktop if all bookmarks, passwords are recovered it will be great help.
    P.S
    i reinstall firefox from drive other than c ,that was in downloaded form.
    Thanks

    The "Old Firefox Data" folder on the desktop has been created as the consequence of resetting Firefox.
    Doing a Session Restore may have reverted the profiles.ini file to a previous version that hasn't registered the new profile folder that a reset had created, so you may need to check for this.
    * C:\Documents and Settings\&lt;user&gt;\Application Data\Mozilla\Firefox\Profiles\&lt;profile&gt;\
    The "Application Data" folder in XP/Win2K and the "AppData" folder in Windows Vista and Windows 7 and later versions are hidden folders.
    *http://kb.mozillazine.org/Show_hidden_files_and_folders
    If you have a profile folder that is more recent than the "Old Firefox Data" on the desktop then you can use edit the profiles.ini file and change the path of the currently default profile to the name of the profile folder as you find in Document and Settings.
    *http://kb.mozillazine.org/Recovering_a_missing_profile
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    It is always best to be cautious with using System Restore as this can cause some file to be replaced with older copies, i.e. your Firefox installation and profile folder can get inconsistent and you may have to reinstall Firefox as well.

  • Can anyone help with associate my new iPhone with iTunes? My other old devices are there, but I see only how to delete one, not how to add one.  Thank you.

    Can anyone help with associate my new iPhone with iTunes? My other old devices are there, but I see only how to delete one, not how to add one.  Thank you.

    iTunes Match is a subscription system that allows you to upload your own music (e.g. coped from CDs) to the cloud so that it shows (in the cloud) on your devices and computers without having to sync/copy it.
    Automatic downloads allows to, for example, buy an app on your computer's iTunes and have it automatically download on your phone without having to connect and sync it or go to the Purchased tab in the App Store app on your download and download it yourself - but doing that, going to the Purchased tab and redownloading an app, should get it associated.
    But no, I'm not aware of any problems that not having it associated causes.

  • Help with converting a Nero file

    I have previously converted a dvd insert designed with Nero into a pdf using adobe acrobat in order to send to someone else.  When I tried to do the same thing today with a new Nero designed insert the conversion wouldn't work.  The message said adobe didn't support the program that created the file.  Any ideas?

    thanks for your response.
    When I create a dvd insert or cd label etc using Nero the file extension is nct - nero cover template.  The printer wants the file as a pdf as he can't open Nero files.  I have version 9.3 of acrobat.
    Date: Mon, 18 Jan 2010 21:43:47 -0700
    From: [email protected]
    To: [email protected]
    Subject: help with converting a Nero file
    Nero is simply a CD/DVD burning application and should have no effect on the type of files that will eventually be on the CD/DVD.
    What type of files are you trying to convert and exactly how are you trying to convert them? Plus, it would help to know the version of Acrobat you are using.
    >

  • I had to put my computer by together without migration or time machine I NEED help with order of the files?

    I had to put my computer by together without migration or time machine I NEED help with order of the files?

    Hi, where are these other files exactly?

  • Itunes won't open after system restore!

    Recently I ran into some problems with my computer and did a system restore, ever since I did that itunes would not open and kept saying "itunes has encountered an error, application is shutting down" after I double clicked the icon on my desktop. This was also the case with Windows Media Player and every other application on my PC.
    I set my PC away to be re-formatted. It turns out there were 17 viruses on there, it's now working fine except I can't open itunes!!
    I've tried uninstalling it and re-installing it. It all goes fine until the very last second of installing when I get the "itunes has encountered an error, application is shutting down" message. The shortcut appears on my desktop though and when I double-click it I get the very same error message!
    Does anyone have any idea what's going on? I've spent £150 on sorting my computer out and this is the final straw! I'm tearing my hair out!!

    iFOUND the Solution!!!
    Go to Add/Remove Programs under Control Panel and for every program that is Apple - iTunes - Quicktime related RIGHT click on it and choose "Repair" and repair it. May take some time for each program.
    Then, I got an error message saying:
    "the file "itunes library.itl" cannot be read because it was created by a newer version of itunes."
    Here, from the Start Menu, search "Apple Software Update" and update every program it says needs updating. I recently this week updated Quicktime to its latest version, but did so anyway. So I updated Quicktime and iTunes...restarted computer...and it worked.
    That's how you do it. iTunes 10.5 works fine now. Hope it does equally well for you.

  • After system restore ,we are not able to activate the windows,while login to systems getting an error 0x800700B7

    after system restore ,we are not able to activate the windows, while login to systems getting an error 0x800700B7
    Cont-8096688758

    hi Jain,
    you may need to check the transfer structures,
    right click infosource and 'change', click 'comm.structure'/expand,
    click 'transfer', move the 0BASE_UOM from left to right side,
    or if you wont use the comm structure anymore, you can right click infosource and 'delete comm structure'
    hope this helps.

  • Cacti graph  lose history after system restore .

    Hi!
    I recently restored my system from a Time Machine backup
    , but all my cacti graph lose history.
    Please see [this thread|http://forums.cacti.net/viewtopic.php?t=31175] on the forum (third post, and more)
    How do I restore history?
    Thanx in advance !

    Hi. Sorry, I know nothing about your "cacti" app, so may not be of much help.
    Did you do a complete system restore (via your Leopard Install disk and Restore from Backup)?
    Or did you use Migration Assistant?
    Or did you restore selected files/folders via the Time Machine interface?
    Did you have anything excluded from Time Machine?
    Did you ever find out from the other forum where (what files/folders) the data is kept? From one of the posts there, it's apparently in a MySql database somewhere?

  • How to recover hp pre-installed games and office after system restore for HP Mini 210-4127se?

    how to recover hp pre-installed games and office after system restore for HP Mini 210-4127se?

    Hi,
    You can reinstall them from Recovery Manager by clicking on Start=> All Programs.
    If you have performed a complete HP Recovery using F11 then all the software should be there. If you have performed a minimized recovery then you can install applications from recovery manager...If none of these works then you'll need USB recovery..
    Here are the links that will guide you through the process:
    Using Recovery Manager to Restore Software and Drivers (Windows 7)
    Performing an HP System Recovery (Windows 7)
    Order USB Recovery
    Note:
    If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
    Although I am an HP employee, I am speaking for myself and not for HP.
    **Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

  • Quicktime issues after system restore

    After system restore we had to reinstall games which required quicktime. after which I reinstalled itunes, but it wouldn't install without completely uninstalling everything for quicktime. reinstalled updated quicktime and itunes, but now games aren't working. Uninstalled games and reinstalled it, but still getting macromedia projector error message. Suggestion is to reinstall quicktime. I feel like I am going in circles. Appreciate any suggestions

    still getting macromedia projector error message.
    What's the precise text of that error message, squirrel?

  • Help with Photoshop Elements 10 after system restore

    Hi I need some help and guidance. I have successfully installed my Photoshop Elements 10 twice now; once on my own; and following a MS Vista System Restore; with the help of Adobe support . I then worked on it for a day and all was well.
    But unbeknown to me at the time, I had a MS System corruption that was causing Boot issues resulting in a forced Restore of my system and both Restores caused the Photoshop elements desk-top shortcut to disappear and a subsequent PSE10 re-install to fail with the dreaded Data7 , and "Application Shared Technologies" and rollback of Orgainizer and Editor etc etc.
    I now realise that the two events were connected and the Adobe Support Person helped me get PSE10 up and running but it involved a lot of file permission changes etc, which lost me in the process, which was done remotely. PS Great customer support!!
    After sorting out my MS Vista problem due to "Corrupt System" files, I now need to get my PSE10 up and running again; but how?
    Regards John

    Have you tried uninstalling and installing again?
    thanks.

  • I need help to open an .idml file after translating it with Dejavu!

    Hi everybody,
    I'm not used to work with InDesign, I only have to check a big problem: I'm a translator and have been working the last 4 weeks on a InDesing-Projekt from German into Italian. I changed the format of the files from .indd into .idml an imported the three files into my Computer-Assisted-Translation Ptrogram DejaVu. I've been working well till now. Now I tried to export the first File and wanted to open the .idml file with Indesign... The program began to work, but then came a warning "syntax error". Please, is there anybody who knows the program better than I (the agency which should know everything about this kind of files gives up at the first problem)??? This is very important to me. I speak german an italian very good, my english is rudimental....
    Thank yopu and have a good day (tel. +49-(0)9208 588316)
    Alessandra

    Sorry for the delay, I had a lot of other stuff going on today. This kind of work is somewhat laborious so I put it off.
    I needed to send you the file, because I don't understand what you mean with opening the zip file and so on...
    An IDML file is just a .ZIP archive of a bunch of XML files.
    In this case, it turns out the problem is pretty obvious. Some story files, instead of containing valid XML, contain "MATTONELLE".
    Like this, in the Terminal on Mac OS X, but substitute as appropriate for Windows:
    $ ls -ld *idml
    -rw-r--r--@ 1 user    staff  4986668 Jun 16 12:26 KK_Preisliste 2011_1-120.idml
    -rw-r--r--  1 user    staff  4892339 Jun 17 00:57 KK_Preisliste 2011_1-120_it.idml
    $ mkdir KK
    $ cd KK
    $ unzip ../KK_Preisliste\ 2011_1-120_it.idml
    Archive:  ../KK_Preisliste 2011_1-120_it.idml
      inflating: Stories/Story_u1fb7.xml 
      inflating: Stories/Story_u2752.xml 
      inflating: Stories/Story_u2ac2.xml 
      inflating: Stories/Story_u31ce.xml 
      inflating: Stories/Story_u51ea.xml 
      inflating: Stories/Story_u208c.xml 
      inflating: Stories/Story_u3787.xml 
      inflating: Spreads/Spread_u34f2.xml 
      inflating: Stories/Story_uc2f.xml 
    $ ls -l Stories/ | head
    total 52712
    -rw-r--r--@ 1 user    staff     4823 Jun  7 21:24 Story_u1009.xml
    -rw-r--r--@ 1 user    staff     6259 Jun  7 21:24 Story_u1025.xml
    -rw-r--r--@ 1 user    staff     4862 Jun  7 21:24 Story_u1040.xml
    -rw-r--r--@ 1 user    staff     4874 Jun  7 21:24 Story_u1061.xml
    -rw-r--r--@ 1 user    staff     4854 Jun  7 21:25 Story_u107d.xml
    -rw-r--r--@ 1 user    staff     1638 Jun  7 21:25 Story_u1093.xml
    -rw-r--r--@ 1 user    staff     1033 Jun  7 21:20 Story_u10aa.xml
    -rw-r--r--@ 1 user    staff      865 Jun  7 21:20 Story_u10c0.xml
    $ ls -l Stories/ | sort  -k 4  | head
    total 52712
    -rw-r--r--@ 1 user    staff       10 Jun  7 21:09 Story_u2a4f.xml
    -rw-r--r--@ 1 user    staff       67 Jun  7 21:10 Story_u2df8.xml
    -rw-r--r--@ 1 user    staff      864 Jun  7 21:08 Story_u3cf.xml
    -rw-r--r--@ 1 user    staff      864 Jun  7 21:08 Story_u573.xml
    -rw-r--r--@ 1 user    staff      864 Jun  7 21:20 Story_u646.xml
    -rw-r--r--@ 1 user    staff      864 Jun  7 21:20 Story_u9b9.xml
    -rw-r--r--@ 1 user    staff      864 Jun  7 21:20 Story_ud0d.xml
    -rw-r--r--@ 1 user    staff      864 Jun  7 21:21 Story_u33a.xml
    -rw-r--r--@ 1 user    staff      864 Jun  7 21:21 Story_u5ab.xml
    $ cat Stories/Story_u2a4f.xml
    MATTONELLE$
    $ cat Stories/Story_u2df8.xml
    Mattonella a cornice X con struttura, ponte di collegamento interno$
    $
    $ cat Stories/Story_u3cf.xml
    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <idPkg:Story xmlns:idPkg="http://ns.adobe.com/AdobeInDesign/idml/1.0/packaging" DOMVersion="7.0">
         <Story Self="u3cf" AppliedTOCStyle="n" TrackChanges="false" StoryTitle="$ID/" AppliedNamedGrid="n">
              <StoryPreference OpticalMarginAlignment="false" OpticalMarginSize="12" FrameType="TextFrameType" StoryOrientation="Horizontal" StoryDirection="LeftToRightDirection"/>
              <InCopyExportOption IncludeGraphicProxies="true" IncludeAllResources="false"/>
              <ParagraphStyleRange AppliedParagraphStyle="ParagraphStyle/$ID/[No paragraph style]">
                   <CharacterStyleRange AppliedCharacterStyle="CharacterStyle/$ID/[No character style]" FontStyle="Light">
                        <Properties>
                             <AppliedFont type="string">DaxPro</AppliedFont>
                        </Properties>
                   </CharacterStyleRange>
              </ParagraphStyleRange>
         </Story>
    </idPkg:Story>
    $
    So, it's probably obvious what you should do with your tool to fix these...
    u3cf is an example of a normal file. I sort the files by file size to find the ones that are far too small to be normal XML.

  • Help with start up. new iMac 27" with Marericks installed has been giving me trouble with IDs and passwords.  More than one account downloaded from older Laptop.  Now the computer has the turning wheel in from of gray screen and won't go any further when

    I recently started using my desktop iMac 27" and have been having problems since installing Mavericks, not saying that Mavericks is the problem per se.  I think I have too many accounts with too many names, with too many Apple IDs and too many passwords, email passwords and Apple ID passwords, and keychain passwords, etc.  Can't keep them straight even though I write everything down.  The screen has been making me log in and log out with Account name and passwords after everything I've been doing, also confused about Users and Groups and how to sync everything. I finally just "shut down" everything and the screen was black.  When I turned the computer on again, the circular gear in the middle just kept turning but nothing happened after that.  Then I held the on button in the back until the screen went black again. 
    What should I do?  Is there a way to combine all my accounts into one account with one Apple ID?  I should say that I also have trying to use iCloud and it has different IDs and passwords. Also when I try to log in with one account name, I can't enter anything I write,and when I type on the keyboard, nothing appears on the screen, although I can receive emails, I can't send them. 
    In another account, what I type does appear on the screen, but I think it's an earlier account and doesn't translate aver to the other account. ALTHOUGH i set up iCloud accounts, they don't appear any more.
    Very confused.  Any Ideas about how I can get the computer to start up again and show a new screen?
    Thanks to anyone who has workable suggestions.

    If you really believe that your system has been compromised, here's what you do:
    Disconnect your Mac from your cable modem;
    Back up any documents on your system that are important to you;
    Boot your Mac from the system installation disks that came with it (insert the disk, restart your Mac, and hold down the "c" key until you get the "spinning gear" icon);
    Choose a language and click the arrow button to continue;
    From the Utilities menu, choose Disk Utility;
    In Disk Utility, select your computer's hard drive;
    Click the "Erase" tab;
    Click the "Security Options" button and select to have it overwrite all the data on the hard drive;
    Click the "Erase" button and allow it to process;
    Once the "erase process has completed (it will take a while), reinstall Mac OS X.
    Or, if this is too much for you to accomplish on your own, take your system to an Apple Store and have them help you perform these steps. If your system was indeed compromised, this will remove any such hack. You can then set up a new user account for the computer, reinstall your applications (reinstall only from original disks or downloads from the company making the software) and documents, and reconnect to the Internet.
    Note that when you reconnect to the cable modem, you may still get an IP address starting with 198. This is normal with some cable modems and probably not a cause for concern. It will not be an indication that your system is still compromised; that will not be possible if you perform all the above steps.
    Regards.

  • Can't create new files after moving to ext drive, LR4

    I moved all photos to a new ext drive (they used to be on the c drive); reformatted my desktop computer; reinstalled LR4. 
    Now there is no parent file under the name of the ext drive on which I can right click and "create a folder inside....".  I am able to create new folders in the existing subfolders.
    There is also no way to sync the drive to find a new folder I created via Windows explorer.
    My filing system is by month and year so now with each passing month I am not able to set up a new file.
    Help!

    Can you right-click on a folder name in the Lightroom Folder Panel and select "Show Parent Folder"?
    Can you import new photos directly to the desired folder in the desired location?

Maybe you are looking for