Help with iVPN for total novice please

Hello,
I am a total VPN novice so I may be doing something stupid here. I have a Mac Air running Mac OS X 10.6.7. I downloaded iVPN tonight. I've put it in the Applications folder and started it up.
I'm trying to create a VPN using L2TP. I've got a time capsule as a router, I've setup DHCP so that my MacAir is always given the address 192.168.0.3 and then I've forwarded the ports 500, 1701 and 4500
to this IP address. For the time being I have the firewall switched off but to be fair I'd rather have it on.
Using iVPN I've set the IP address range for clients to 192.168.0.10 - 192.168.0.20.
I then hit start in IVPN but the server always shows status OFF.
I've checked Activity monitor and vpnd and racoon are running. If I look at the log for vpnd is says listening for connections but it never sees any.
I've tried to connect to the vpn but it won't respond. I've tried ping-ing the server ip address but get no response.
Any help greatly appreciated, if I need to provide more info let me know and if I come across as very daft then it is because I am. I am loving trying to teach myself this stuff but right now I think my brain is going to melt!
Thanks.
Jenni

What are your goals here? Getting access to disk storage on your TC? That won't work via a VPN, as you don't have a way to terminate the VPN connection on your TC, and you probably don't have anything else on your LAN that can back-connect to the TC.
Are you running Mac OS X Server 10.5 here, as is implied by the choice of forum? (Or are you trying to activate an in-bound VPN into this MacBook Air running Mac OS X client software? Or into the TC?) And is this 10.5 or 10.6 you're running?
It's not easily feasible to test VPNs locally (from hosts operating in the same IP subnet), and connecting from the client box to itself is unlikely to work.
If you want to use VPNs, reconfigure your local network out of the 192.168.0.0/24 and 192.168.1.0/24 subnets, as those are ubiquitous, and having the same subnet on both ends of the VPN connection will trigger IP routing issues.
FWIW, It's far easier to configure a VPN into a firewall gateway box (one with VPN capabilities, and this is something which the Airport and Time Capsule series devices lack), and (for your sort of usage) PPTP and L2TP clients (built into Mac OS X 10.5 and 10.6) are the easiest approaches. From that, you can VPN connect to the gateway (in front of your TC) and can then access the TC as if you were local to your network.

Similar Messages

Need serious help with quicktime for windows. PLEASE HELP!!! : (

So i had quicktime on my windows program list and have had it since i bought the computer back in 08' well i got it back from a pawn shop after being down on my luck and they wiped everything out. ever since then i have been uploading pics and videos from my digital camera and the pics are fine but alot of the vids that i have put on here cannot be viewed and when i try to watch them i get an error message saying i need the latest version of quicktime. so i have tried uninstalling it after many failed update attemtps and i cannot get it to uninstall i have tried everything imaginable, from windows utility cleanup to removing it in add/remove programs to just deleting the files in the program list folder. Nothing. i get a prompt saying "the feature you are trying to use is on a resource that is unavailable." and then it goes on to say.. "Click ok to try again or enter an alternate path to a folder containing the installation package 'quicktime.msi' in the box below." and it already has two diffrent paths located in the entry box and i have tried them both and it keeps giving me the same message as i posted above. i am so lost and it dont help that i dont really know a whole lot about computers. i am stuck between a rock and a hard place.any input would be greatly appreciated. thanks!

i get a prompt saying "the feature you are trying to use is on a resource that is unavailable." and then it goes on to say.. "Click ok to try again or enter an alternate path to a folder containing the installation package 'quicktime.msi' in the box below."
Unfortunately, these sorts of msi-related troubles have gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing QuickTime again. Does the install go through properly this time?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

Help with (forte for Java CE) please

I had installed forte for Java CE and had recieved some problems. After I installed the program and tried to run it it said this error.
Cannot load c:\j2sdk1~1.1_0\jre\bin\classic\jvm.dll
Bacicly why I installed forte was for the debugger part. Jedit doesn't seem to work for me. I'm using windows xp home edition.
Any help would be great
Thanks in advance
George

Try downloading a newer SDK and getting
c:\j2sdk1~1.1_0\jre\bin
out of the path

Help with MacMail for a newbie please

I have just set up our G5 Mac's on our Windows Domain, I have enabled IMAP on Exchange Server 2003 and configured Mac Mail accordingly.
Mac Mail can now send and receive messages and attachment just fine but when a sent message fails you do not receive the automated delivery failure notification from the System Administrator.
If the Mac operator uses Outlook Web Access or a PC using IMAP to check his Inbox then the automated messages are displayed fine but Mac Mail refuses to pick them up. I am new to Mac's and would appreciate some advice, I have checked the Junk mail and they are not there either....
Cheers for reading.

Hi Mark, and a warm welcome to the forums!
I really have no idea on this, but I suspect possibly a port problem, do you know which port the failure notification uses?
Might turn off the Mac's Firewall for a test.
Ports used by Exchange Server...
http://www.petri.co.il/portsused_byexchange.htm

Help with updates for CS6

I need help installing latest updates for CS6. I have Win 7 and have tried updating from the Help - Updates menu. The error is: U43M1D207.

Thanks for your response. I am in the United States in So. Arizona.
Date: Fri, 5 Oct 2012 12:21:45 -0600
From: [email protected]
To: [email protected]
Subject: Help with updates for CS6
Re: Help with updates for CS6 created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Crunkle1 you are welcome to work directly with our support team for guided assistance. If you go to http://www.adobe.com/ and select Help and Contact Us you should be given the option to contact our support team via telephone. Which country/region are you in?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4752605#4752605
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4752605#4752605
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4752605#4752605. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Help with Adobe.premiere.elements12. Please It would appear under the organizer tab that the photos are organised in the lowest folder in the folder structure within Windows Explorer. How can I use the Windows Explorer structure to organise the photos wi

Help with Adobe.premiere.elements12. Please
It would appear under the organizer tab that the photos are organised in the lowest folder in the folder structure within Windows Explorer. How can I use the Windows Explorer structure to organise the photos within Elements.

In a situation such as yours, I tend to consolidate items into folders so I have folders of nice workable numbers of images, somewhere between 20 and 200 images. Now, whatever, once you've imported, do your moving within LR, not the OS! I will select all in a folder and drag into a folder a level or two or three above, and then delete the newly empty subfolders. I hope this helps a bit!
Once you've reached just new Imports of camera output, you'll be flying along.

I need help with my for loop in this array

Ok well, I can't get my code to work. Also, please remember that this is just my draft so it isnt pretty. I will fix it up later so please look at it. The thing I want to do is look into the array for a time that matches what the user entered and return the toString() of that one. I know there is something wrong with my for loop but I cant figure how to fix it. please help. here is what i have so far:
import javax.swing.JOptionPane;
public class Runner
    public static void main (String[] args)
        String timeStr;
        int time, again, optiStr;
        Inbound[] in = new Inbound[25];
         in[0]=new Inbound ("",0,"On Time num0");
         in[1]=new Inbound ("",2,"On Time num1");
         in[2]=new Inbound ("",3,"Delayed num2");
         in[3]=new Inbound ("",4,"On Time");
         in[4]=new Inbound ("",5,"On Time");
         in[5]=new Inbound ("",6,"Canceled");
         in[6]=new Inbound ("",1,"Canceled num6");
         in[7]=new Inbound ("",8,"On Time");
         in[8]=new Inbound ("",9,"Delayed");
         in[9]=new Inbound ("",10,"On Time");
         in[10]=new Inbound ("",11,"Delayed");
         in[11]=new Inbound ("",12,"On Time");
         in[12]=new Inbound ("",13,"Delayed");
         in[13]=new Inbound ("",14,"On Time");
         in[14]=new Inbound ("",15,"On Time");
         in[15]=new Inbound ("",16,"On Time");
         in[16]=new Inbound ("",17,"Canceled");
         in[17]=new Inbound ("",18,"On Time");
         in[18]=new Inbound ("",19,"On Time");
         in[19]=new Inbound ("",20,"Canceled");
         in[20]=new Inbound ("",21,"On Time");
         in[21]=new Inbound ("",22,"Delayed");
         in[22]=new Inbound ("",23,"On Time");
         in[23]=new Inbound ("",24,"Cancled");
         in[24]=new Inbound ("",7,"On Time num24");
        do{
            timeStr = JOptionPane.showInputDialog ("In military time, what hour do you want?");
            time = Integer.parseInt(timeStr);
            if (time<=0 || time>24)
             JOptionPane.showMessageDialog (null, "Error");
             optiStr = JOptionPane.showConfirmDialog (null, "If you want Incoming flights click Yes, but if not click No");
            if (optiStr==JOptionPane.YES_OPTION)
//(ok this is the for loop i am talking about )
                for (int index = 0; index < in.length; index++)
                  if ( time == Inbound.getTime())
               JOptionPane.showMessageDialog (null, Inbound.tostring()); //return the time asked for
//               else JOptionPane.showMessageDialog (null, "else");
            }//temp return else if failed to find time asked for
//             else
//               if (optiStr==JOptionPane.CANCEL_OPTION)
//                 JOptionPane.showMessageDialog(null,"Canceled");
//              else
//                {Outbound.run();
//                JOptionPane.showMessageDialog (null, "outbound");}//temp
              again=JOptionPane.showConfirmDialog(null, "Try again?");
        while (again==JOptionPane.YES_OPTION);
}any help would be greatly appriciated.

rumble14 wrote:
Ok well, I can't get my code to work. Also, please remember that this is just my draft so it isnt pretty. I will fix it up later so please look at it. The thing I want to do is look into the array for a time that matches what the user entered and return the toString() of that one. I know there is something wrong with my for loop but I cant figure how to fix it. please help. here is what i have so far:
>//(ok this is the for loop i am talking about )
for (int index = 0; index < in.length; index++)
if ( time == Inbound.getTime())
JOptionPane.showMessageDialog (null, Inbound.tostring()); //return the time asked for
Inbound.getTime() is a static method of your Inbound class, that always returns the same value, I presume? As opposed to each of the 25 members of your array in, which have individual values?
Edited by: darb on Mar 26, 2008 11:12 AM

Need help with Dynamic Excel File Name please.

I am try to output an excel file with dynamic date.
Here what I done.
I am using SQL 2012.
Create Execute SQL Task Connect Type: Excel
Create Data Flow Task set to DelayValidation: True
Create OLE DB Sourc
Create Data Converstion
Excel Destination
Excel Connection, Expression, select ExcelFilePath
@[User::sXLFilePath] + @[User::sFileName] + RIGHT("0" + (DT_WSTR, 2) DATEPART("DD", GETDATE()), 2)+ RIGHT("0" + (DT_WSTR, 2) DATEPART("MM", GETDATE()), 2) + RIGHT((DT_WSTR,
4) DATEPART("YYYY", GETDATE()), 2) +".csv"
C:\ExcelOutPut\SOX_CAM_SQL_Report_010215.xls
What I try to accomplish is output the file with each day append to it, date must be DDMMYY.
I google it and found many samples, tested it, and none of them is work for me.
Any suggestions or some examples to share is greatly appreciate.
I am new to SSIS. I found one poster have similar issue and inside the posted below, there was one suggestion to create variable and connection string but how do I bind that variable to Excel Connection manger.
Please help.
Thank you so much in advance.
Ex: SOX_CAM_SQL_Report _020215.csv
SOX_CAM_SQL_Report _030215.csv
--Similar issue:
https://social.msdn.microsoft.com/Forums/en-US/bda433aa-c8f8-47c9-9e56-efd20b8354ac/creating-a-dynamic-excel-file?forum=sqlintegrationservices
Suggestion in the above posted but where can bind this to Excel Connection Manger.
Please help provide step by step. Thanks.
"Provider=Microsoft.Jet.OLEDB.4.0;Data Source=c:\\temp\\" + "ExcelTarget" + (DT_WSTR,4)DATEPART("yyyy",GETDATE()) +
".xls" + ";Extended Properties=\"EXCEL 8.0;HDR=YES\";"
And yes, as you were intimating, the delay validation on the dataflow should be set.

Hi NguyenBL,
According to your description, you created ssis package to export data from database to excel, when the package runs, you want to create new excel and name the file with time stamp. If that is the case, we can achieve the goal by following steps:
Create a script task used to create excel files.
Create a data flow task to export data from database to excel.
Add OLE DB source to data flow task.
Add Excel Destination to data flow task.
Create connection manager for OLE DB and Excel.
Click Excel Connection Manager, in Properties window, click (…) button next to Expressions, then set ExcelFilePath with expression like below:
"C:\\ETL Lab\\CreateNewExcel\\ExportData_"+REPLACE((DT_STR, 20, 1252)(DT_DBTIMESTAMP)@[System::StartTime], ":", "")+".xls"
For detail information, please refer to the document:
https://sqljourney.wordpress.com/2013/01/12/ssis-create-new-excel-file-dynamically-to-export-data/
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

Need some URGENT help with 3 DVD mastering issues PLEASE! :

Hi there,
Firstly, I am running DVD SP 3.0.2 on Mac OS 10.4.7 on a G5 Dual 2 GHz 3Gb Ram plenty of HD space...
I am creating a DVD with: An intro sequence, a main menu, 4 sub menus, and 4 sections with around 12 chapters each.
I am having some big problems, and a pretty stuck. I will lest them separately below, numbered. If you are able to help, please refer clearly to which number you are helping with. Any help is MUCH appreciated! Many thanks!!
1. Each of the 5 menus (1 main, 4 sub) have a background video, and a separate audio track. I added the background videos by simply dragging them to the assests panel, then from there onto the menu editor window. They are created in FCP and are properly encoded. However, when I click the motion button, or use the simulator, the videos do not show up. The music plays, but all i see is plain black.
What is going on?!?!?!
2. I am really struggling with rollover buttons. I have custom created buttons, and I wand them to have a soft red glow around them when hovered over. HOW ON EARTH DO I ACTUALLY DO THIS??
The buttons are in photoshop so can be exported with/without background/glow in any format.
3. Is it possible, once I have got the above rollover working, to have an image to the right hand side of my buttons which changes with the the button rollover. i.e. hover over button 1, see image 1. hover over button 2, image changes to image 2.
PLEASE PLEASE give any help you can, I have a deadline coming up and am quite stumped. Thanks again!!

I am still having problems regarding issue Number 1. PLEASE ANYONE HELP?!
Sorry, I'm not sure about the motion menus. I avoid those whenever possible. But you might click on the menu in the storyline tab (whatever it's called -- the hierarchical view with the disc, tracks, slideshows, etc.) and look at the properties and see if there's anything you have to enable specifically for motion. And be sure the motion button is on on the main display/preview area, but it sounds like you already know how that works.
For your information, here is a screen grab of the menu I am trying to create:
http://www.redhavoc.co.uk/stuff/menu.jpg
I think it is obvious that when a button is hovered over, I want it to glow red, and the image to the right will change to match the respective button.
IS THIS GOING TO BE POSSIBLE????
Yes.
First, your menus have to be layered menus. Unfortunately, there's no way to convert non-layered menus to layered menus, so if you already have non-layered, you'll have to just delete them and create new layered menus. The button (and menu item) to create a layered menu should be right by the normal new-menu item.
Next, the graphical work is all in Photoshop.
Side tip: You may already know this, but I found it's best to use 640x480 for the Photoshop document. When I do text and leave it as a text object in the Photoshop file, it resizes poorly in DVDSP. So this ends up being another 720x480 vs. 640x480 square/rectangular pixel conversion thing. DVDSP plays in the 640x480 world, at least as far as the designer can see. So I keep my images at 640x480, and it doesn't have to resize, and everything looks right.
Moving on... Set up your basic background, the part that won't change (or will have other things covering it, like for your square image).
Then put in all the buttons and images you'll be using, each part in a separate layer. This could have fifteen buttons (you have five buttons, and there can be three versions for each -- inactive, selected, and activated versions) and five or six square images (you said one for each button, and you might want a blank default if, say, you want to add a "back" button on the menu and want some blank or default image for the square when they're on the "back" button).
Sometimes people don't bother with a separate "active" button state, but you usually want some visual feedback that they clicked the button. Also, I usually just build the default (unselected) button into the background; that's less hassle later on, and it will just draw the selected or activated buttons over that when the user is on that button.
Line up all your buttons and images. All the square images lined up perfectly on top of each other, all the buttons in the right places (so you'll have three buttons stacked on top of each other in each spot). Give each layer a short but quickly recognizable name, and line them up in a consistent order. (button1-default, button1-selected, button1-active, button1-squarepicture, then button2-default, ... etc.) Photoshop and DVDSP don't care, but it makes it easier for you later.
Note that earlier versions of DVDSP won't show Photoshop layer effects. (They handle layers, just not the effects, like inner glow, outer bezel, etc.) I don't remember when they changed this, but I think it was version 4.something. So if you're using that method to make your buttons glow, you may have to flatten each selected or active button layer, and you may even need to create a dummy blank layer underneath it first to give it something to flatten onto.
Save the file as a standard Photoshop file (.psd). Drag the file onto your DVDSP layered menu and set it as the background.
Now, in DVDSP, create all your buttons. Just drag boxes over/around the button pictures you have. Feel free to make them extra-big; users won't see the actual area you've selected, and bigger areas makes it easier for people to hit them if they're using a mouse on a computer to watch the DVD. You can point the buttons to their targets now if you want, and set the end jumps on the tracks if you want. (I tend to set the end jumps on the tracks so they automatically select the button for the next track.)
Now's the fun part, since it will actually hook everything up and should be easy if your naming layer order were consistent. Click on the layered menu (in that hierarchical view) and look at the properties window. (Sorry I can't remember the technical names for all these windows; I'm doing this all from memory. So feel free to ask more questions if you can't find what I'm talking about.) One of the properties tabs should have a grid of checkboxes with a list of your layers. Make sure the background is checked for all of the states. Then check the layers you want to show for each button state, as well as the corresponding square image to show for each.
Again, I'm doing this from memory, and I can't remember exactly how things are listed in that grid. But I remember it keeps your layers in the same order you put them in the Photoshop file and shows you those names, so it should make it easy to go down the list and check the right boxes.
And another side tip: You can update the Photoshop file, but once you've put it in DVDSP, if you change the layer order, it will screw up the check boxes you checked. It always shows you the layer names correctly, but it keeps the checkboxes in DVDSP simply assigned to the layer number, so the fifth layer will keep the same checkboxes even if you juggle them so some other layer is now the fifth layer. So if you do juggle the layers in Photoshop, go back and fix the checkbox list in DVDSP.
I put a sample Photoshop file based on yours in
http://dan.black.org/layered-menu-sample.psd
It's quick and dirty, but shows the layer layout, and you should be able to drop it on DVDSP to play with. (I also won't leave it there forever, maybe a few weeks, so anybody reading this in a month or more probably will get a 404 for that url.)
Again, doing this from memory, so feel free to ask if anything doesn't work or doesn't make sense.
G4/dual867 Mac OS X (10.4.5) 2GB/0.8TB

I need help with searching for an image inside another image

I need to write a program that checks for a specific image (a jpg) inside another, larger, image (a jpg). If so, it returns a value of true. Can anyone help me?
Winner takes all. First person to solve this gets 10 dukes.
Please help.

Hi,
I would use a full screen image Sequence made with png for transparency and put your article behind. no auto play, stop at first and last image. and information for swipe to display article.

Help With Crash Code In PRE8 Please

In an interest to turn some of my recent discussions in a more positive direction and in keeping with the primary function of this forum (seeking advice and solutions) and in a further effort to not continually ***** about PRE8, can someone please help with and interpret the following crash codes recently generated by PRE8?
Thanks in advance for any help.
Glenn
Description
A problem caused this program to stop interacting with Windows.
Problem signature
Problem Event Name:                      AppHangXProcB1
Application Name:                           Adobe Premiere Elements.exe
Application Version:                         8.0.0.0
Application Timestamp:                   4aa5c87c
Hang Signature:                                ba8e
Hang Type:                                        32
Waiting on Application Name:       ElementsOrganizerSyncAgent.exe
Waiting on Application Version:    8.0.0.0
OS Version:                                        6.0.6001.2.1.0.256.1
Locale ID:                                           1033
Additional Hang Signature 1:         cb0b340a390054264815ceb8e3574d53
Additional Hang Signature 2:         84f3
Additional Hang Signature 3:         f0a90877ec38c16fd285cc410c83433d
Additional Hang Signature 4:         ba8e
Additional Hang Signature 5:         cb0b340a390054264815ceb8e3574d53
Additional Hang Signature 6:         84f3
Additional Hang Signature 7:         f0a90877ec38c16fd285cc410c83433d
Extra information about the problem
Bucket ID:                                          749899167
Description
A problem caused this program to stop interacting with Windows.
Problem signature
Problem Event Name:                      AppHangXProcB1
Application Name:                           Adobe Premiere Elements.exe
Application Version:                         8.0.0.0
Application Timestamp:                   4aa5c87c
Hang Signature:                                ba8e
Hang Type:                                        32
Waiting on Application Name:       ElementsOrganizerSyncAgent.exe
Waiting on Application Version:    8.0.0.0
OS Version:                                        6.0.6001.2.1.0.256.1
Locale ID:                                           1033
Additional Hang Signature 1:         cb0b340a390054264815ceb8e3574d53
Additional Hang Signature 2:         84f3
Additional Hang Signature 3:         f0a90877ec38c16fd285cc410c83433d
Additional Hang Signature 4:         ba8e
Additional Hang Signature 5:         cb0b340a390054264815ceb8e3574d53
Additional Hang Signature 6:         84f3
Additional Hang Signature 7:         f0a90877ec38c16fd285cc410c83433d
Extra information about the problem
Bucket ID:                                          749899167
Description
A problem caused this program to stop interacting with Windows.
Problem signature
Problem Event Name:                      AppHangXProcB1
Application Name:                           Adobe Premiere Elements.exe
Application Version:                         8.0.0.0
Application Timestamp:                   4aa5c87c
Hang Signature:                                ba8e
Hang Type:                                        32
Waiting on Application Name:       ElementsOrganizerSyncAgent.exe
Waiting on Application Version:    8.0.0.0
OS Version:                                        6.0.6001.2.1.0.256.1
Locale ID:                                           1033
Additional Hang Signature 1:         cb0b340a390054264815ceb8e3574d53
Additional Hang Signature 2:         84f3
Additional Hang Signature 3:         f0a90877ec38c16fd285cc410c83433d
Additional Hang Signature 4:         ba8e
Additional Hang Signature 5:         cb0b340a390054264815ceb8e3574d53
Additional Hang Signature 6:         84f3
Additional Hang Signature 7:         f0a90877ec38c16fd285cc410c83433d
Extra information about the problem
Bucket ID:                                          749899167
Description
A problem caused this program to stop interacting with Windows.
Problem signature
Problem Event Name:                      AppHangB1
Application Name:                           Adobe Premiere Elements.exe
Application Version:                         8.0.0.0
Application Timestamp:                   4aa5c87c
Hang Signature:                                af71
Hang Type:                                        0
OS Version:                                        6.0.6001.2.1.0.256.1
Locale ID:                                           1033
Additional Hang Signature 1:         37a5e7ba79ac8a533571e7d8f2e8acd0
Additional Hang Signature 2:         d900
Additional Hang Signature 3:         431be4795d1c061aba02734aa57c4950
Additional Hang Signature 4:         af71
Additional Hang Signature 5:         37a5e7ba79ac8a533571e7d8f2e8acd0
Additional Hang Signature 6:         d900
Additional Hang Signature 7:         431be4795d1c061aba02734aa57c4950
Extra information about the problem
Bucket ID:                                          811067413
Description
A problem caused this program to stop interacting with Windows.
Problem signature
Problem Event Name:                      AppHangB1
Application Name:                           Adobe Premiere Elements.exe
Application Version:                         8.0.0.0
Application Timestamp:                   4aa5c87c
Hang Signature:                                7008
Hang Type:                                        0
OS Version:                                        6.0.6001.2.1.0.256.1
Locale ID:                                           1033
Additional Hang Signature 1:         f0af3d01fb74f43241231d4e61778ffa
Additional Hang Signature 2:         0fb3
Additional Hang Signature 3:         a5f1d311bc7bfa26f067b42cbdeac6af
Additional Hang Signature 4:         7008
Additional Hang Signature 5:         f0af3d01fb74f43241231d4e61778ffa
Additional Hang Signature 6:         0fb3
Additional Hang Signature 7:         a5f1d311bc7bfa26f067b42cbdeac6af
Extra information about the problem
Bucket ID:                                          781893170

Here are my system specs. Let me know if you need anything else.
Thanks
Glenn
Operating System
MS Windows Vista Ultimate SP2
           Installation Date: 06 March 2009, 02:58
           Intel Mobile Core 2 Duo T9550
               Cores                       2
               Threads                     2
               Name                        Intel Mobile Core 2 Duo T9550
               Code Name                   Penryn
               Package                     Socket P (478)
               Technology                  45nm
               Specification               Intel Core2 Duo CPU T9550 @ 2.66GHz
               Family                      6
               Extended family             6
               Model                       7
               Extended model              17
               Stepping                    A
               Revision                    E0
               Instructions                MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, EM64T
               Bus speed                   266.0 MHz
               Rated Bus speed             1064.0 MHz
               Stock core speed            2666 MHz
               Stock bus speed             266 MHz
               Average Temperature         36 °C
               Cache
                   L1 data cache size              2 x 32 KBytes
                   L1 instructions cache size      2 x 32 KBytes
                   L2 unified cache size           6144 KBytes
               Core 1
                   Core speed            1596.0 MHz
                   Multiplier            x 6.0
                   Bus speed             266.0 MHz
                   Rated Bus speed       1064.0 MHz
                   Temperature          37 °C
                   Thread 1
                       APIC ID     0
               Core 2
                   Core speed            2660.0 MHz
                   Multiplier            x 6.0
                   Bus speed             266.0 MHz
                   Rated Bus speed       1064.0 MHz
                   Temperature           36 °C
                   Thread 1
                       APIC ID     1
      Memory
               Type                                DDR2
               Size                                4096 MBytes
               Channels #                          Dual
               DRAM frequency                      399.0 MHz
               CAS# Latency (CL)                   6.0 clocks
              RAS# to CAS# delay (tRCD)           6 clocks
               RAS# precharge (tRP)                6 clocks
               Cycle time (tRAS)                   18 clocks
           SPD
               Number of SPD modules          2
               Slot #1
                   Type                DDR2
                   Size                2048 MBytes
                   Manufacturer        Hyundai Electronics
                   Max bandwidth       PC2-6400 (400 MHz)
                   Part number         HYMP125S64CP8-S6
                   Serial number       00007112
                   Week/year           52 / 08
                   SPD Ext.            EPP
                   JEDEC #3
                       Frequency             400.000000 MHz
                       CAS# latency          6.0
                       RAS# to CAS#          6
                       RAS# Precharge        6
                       tRAS                  18
                       tRC                   24
                       Voltage              1.8 V
                   JEDEC #2
                       Frequency             333.333344 MHz
                       CAS# latency          5.0
                       RAS# to CAS#          6
                       RAS# Precharge        6
                       tRAS                  16
                       tRC                   21
                       Voltage               1.8 V
                   JEDEC #1
                       Frequency             266.666656 MHz
                       CAS# latency          4.0
                       RAS# to CAS#          4
                       RAS# Precharge        4
                       tRAS                  12
                       tRC                   16
                       Voltage               1.8 V
               Slot #2
                   Type                DDR2
                   Size                2048 MBytes
                   Manufacturer        Hyundai Electronics
                   Max bandwidth       PC2-6400 (400 MHz)
                   Part number         HYMP125S64CP8-S6
                   Serial number       02008065
                   Week/year           52 / 08
                   SPD Ext.            EPP
                   JEDEC #3
                       Frequency             400.000000 MHz
                       CAS# latency          6.0
                       RAS# to CAS#          6
                       RAS# Precharge        6
                       tRAS                  18
                      tRC                   24
                       Voltage               1.8 V
                   JEDEC #2
                       Frequency             333.333344 MHz
                       CAS# latency          5.0
                       RAS# to CAS#          6
                       RAS# Precharge        6
                       tRAS                  16
                       tRC                   21
                       Voltage               1.8 V
                   JEDEC #1
                       Frequency             266.666656 MHz
                       CAS# latency          4.0
                       RAS# to CAS#          4
                       RAS# Precharge        4
                       tRAS                  12
                       tRC                   16
                       Voltage               1.8 V
Mother Board
Manufacturer   Dell, Inc.
           Model                      0P786H
           Version                    A04
           Chipset vendor             Intel
         Chipset model              PM45
           Chipset revision           07
           Southbridge vendor         Intel
           Southbridge model          82801IM (ICH9-M)
           Southbridge revision       03
           BIOS
               Brand       Dell Inc.
               Version     A04
               Date        11/26/2008
           Monitor
               Name                    Generic PnP Monitor on ATI Mobility Radeon HD 3650
               State                   enable
               State                   primary
               Monitor Width           1920
               Monitor Height          1200
               Monitor Bit             32
               Monitor Frequency       60
               Device:                 \\.\DISPLAY1\Monitor0
               Name                    Default Monitor on ATI Mobility Radeon HD 3650
               State                   disabled
               State                   removable
               Monitor Width           800
               Monitor Height          600
               Monitor Bit             32
               Monitor Frequency      60
               Device:                 \\.\DISPLAY2
           ATI Mobility Radeon HD 3650
               GPU                         M86
               Device ID                   1002-9591
               Subvendor                   Dell (1028)

Help with Photoshop Print Settings? Please-I need this Before Tommorow!

Omfg, this is driving me up the wall. Does anybody have a solution as to why every single time I try to edit the photoshop page setup settings and click OK, it resets everything I adjusted and replaces it with the defaults.
Somebody, please help me!

Are you looking at the settings for different documents? The print settings are stored with the document now.
So, for example, if you open Document A and change its print settings, they should stay set for Document A.
But, if you then open Document B, you'll see the print settings that were originally saved with Document B.
-Noel

Idiot needs help with hanging mac book pro please

can anyone please help me
i have a 13 inch 2013 macbook pro but since yesterday every 30/40 seconds if im trying the spinner circle thing comes up and even now I'm trping faster than my mac can keep up
iv installed nothing recently
im really stuck where to go from here
really sorry if I'm vague but I'm not a computer genius
if all fails then i have to take it back to apple
thanks for any help

EtreCheck version: 2.1.5 (108)
Report generated 3 January 2015 17:53:58 GMT
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.9 GHz Intel Core i7 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 2:36:51
Disk Information: ℹ️
TOSHIBA MK7559GSXF disk0 : (750.16 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 748.93 GB (635.73 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 749.30 GB Online
MATSHITADVD-R   UJ-8A8 disk2 : (329.8 MB)
disk2s1 (disk2s1) <not mounted> : 287 MB
disk2s1s1 (disk2s1s1) <not mounted> : 32 KB
Untitled Disc (disk2s1s2) /Volumes/Untitled Disc : 286 MB (0 B free)
USB Information: ℹ️
Western Digital External HDD 160.04 GB
WD USB 2 (disk3s1) /Volumes/WD USB 2 : 160.04 GB (64.46 GB free)
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[loaded] com.divx.dms.agent.plist [Support]
[loaded] com.divx.update.agent.plist [Support]
[invalid?] com.oracle.java.Java-Updater.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[invalid?] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.tunabellysoftware.TGFanHelper.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[loaded] com.divx.agent.postinstall.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Google Drive Application (/Applications/Google Drive.app)
Safari Application (/Applications/Safari.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 3.0.0.126   - SDK 10.8 [Support]
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
DivXBrowserPlugin: Version: 2.2 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
OVSHelper: Version: 1.1 [Support]
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.1.0 [Support]
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
Safari Extensions: ℹ️
DivX Plus Web Player HTML5 <video> [Installed]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Flip4Mac WMV [Support]
Perian [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      19% Finder
      2% WindowServer
      0% AppleSpell
      0% DesktopServicesHelper
      0% mds_stores
Top Processes by Memory: ℹ️
429 MB iPhoto
198 MB Finder
180 MB iTunes
144 MB com.apple.WebKit.WebContent
112 MB mds_stores
Virtual Memory Information: ℹ️
1.97 GB Free RAM
4.26 GB Active RAM
1.32 GB Inactive RAM
1.03 GB Wired RAM
3.49 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Jan 3, 2015, 03:18:42 PM Self test - passed
Jan 1, 2015, 02:04:03 PM /Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2015-01-01-140403_[ redacted].cpu_resource.diag [Details]

Help with Audio for Premiere Project

Working on a lengthy project and need some help with audio which is not my specialty!
I am recording using a Sony EX1r and a wireless lav mic,     OK. Here is what is happening.
When I import the clip into project I get Audio from the left speaker.   If I burn a DVD and playback on home player with surround sound, I get audio out of just the left speaker which makes sense.    SO I go to Premier and use "Fill Left" which fixes the audio on my computer and get sound from left and right speakers.    The odd thing is that when I play this version back from DVD on the surround sound system, the audio now only comes from the CENTER speaker. I dont get anything out of left OR the right speaker so it sounds hollow.
I am sure I am missing something obvious so please be kind.
Is there an easy way to get my audio to come out of Left, Center, and Right speakers (and rear for that matter) ???
Thank you
Ted

Bill,
The DVD player is a Sony BluRay and the receiver is an Onkyo AV receiver HT-R380.
My thinking is that it is something that I am doing wrong inside Premiere vs something that the DVD player or receiver is doing.    My final product will need to play on a variety of DVD players so I need to get it right.
It just seems odd that my default output DVD provides sound to the left speaker but then removes it when I fill Left.
Am I setting up my audio tracks wrong? Or should I being doing something with a 5.1 track???
Thanks
Ted

Need help with a Blackberry Curve 9300, please...

Hello, everyone, I had a look around the forum and came across a post which offered advice one what to include in questions, so I have tried to include the info below.
Device info
Your carrier: Unlocked (was using Virgin)
Model info and OS version (Go to Settings, then Options, then about): Blackberry Curve 9300, OS 6
Apps and free space
File free before and after a battery remove/replace. (Go to Settings, then Options, then status): 60%
Did a battery pull fix your issue? No
Apps installed and their version if possible. (Go to Settings, then Options, then applications): None, only the ones that come with it after reset to factory
BT device model/version (you will have to look at the BT device): Don't know what this means
When writing your question
Any other details that would help us out with your issue: This was my teenage brother's phone, which since has been given to me. The phone was severely mistreated; thrown around, stepped on and chewed. The battery had to be replaced as well as the middle chassis and the front and back cases along with the keyboard, bottom clip and screen.
Good description of what is really wrong and how to reproduce if possible. Details of what you did before: I managed to get it working after I had replaced everything listed above, but it will not charge using the cable. I have to keep taking the battery out and plugging it in seperately to charge, then putting back in the phone. This is after replacing the cable as my brother broke that too, so it's not the cable. He's damaged the data/ charge port.
The camera will not work, but at the moment I am not looking for a solution for that. The error is: "Could not start the camera. Close other applications and try opening the camera again". No applications are open and the OS has just been updated to the most recent version. For this reason, I think he's managed to break that too and it would need to be replaced if that's possible.
My issue at the moment... My mother, as you can imagine is furious with him for trashing the phone she bought him at about £250 when it was new a couple of years ago. So, as I have managed to get it to turn on and pick up wi-fi, she has said I can keep it. I am on Virgin Mobile and this phone is unlocked. It will not pick up any network even using my Virgin SIM card which works fine. My brother was also using it on Virgin.
I can use it with wi-fi and have already contacted t-mobile and Virgin Mobile to make there there's no problem with them. There isn't. The number has been put under my ownership and the phone registered to me now. It is not blocked or blacklisted, yet, only comes up with SOS for network.
Because of this, they and the local phone shop think he might have damaged the antenna inside. I am an iPhone user, this is the first time I have used a Blackberry, so I have no idea - can the antenna be repaired by myself?
Or, given that the camera doesn't work either/ needs replacing, would it just be better to get a replacement using my contents insurance? I am unsure which would be cheaper, to get the parts and try and fix it myself, or pay the excess for the insurance.
Advice appreciated... Thanks in advance.

Hey MaggzieP,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
This KB article will determine if it is a software or hardware related issue for the camera: www.blackberry.com/btsc/KB15544
Also if you tried more than 1 SIM card in the BlackBerry Curve 9300 smartphone and it still shows SOS, this could be hardware related as well.
For all repairs, I can only suggest checking with the point of sale or network service provider for further options.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Help with iVPN for total novice please

Similar Messages

Maybe you are looking for