Help with java and adobe

I have CS6 and ever since I installed Yosemite on my mac none of my adobe products will open and it keeps giving me a message saying I must install legacy java se 6. I updated my java already and I am still running into issues. Please help

needhelpnow,
Did you download from here,
http://support.apple.com/kb/DL1572
or what happens if you do?

Similar Messages

Help with N8 and Adobe Premiere?

Hi, I am using Adobe Premiere Pro CS4 v4.1.0.
I recently got a Nokia N8 and am now trying to edit the video recordings, but am having some problems.
The phone records at 25fps 1280x720 using H.264 MPEG-4 codec, with sound in Stereo 130kbps 48 kHz.
When I create a project and load the .mp4 file into it, the first problem I see is that it reads it as 500fps and the video is only a second or 2 long.
I then interpret the footage to the correct 25fps, and the video then works fine. However, the sound seems to not be there.
I've noticed that due to Premiere interpreting it as 500fps, it thus only plays the first second or two of the sound when left as 500fps and plays all the video in that second or two, and thus when changing to the correct 25fps, it is therefore only the two seconds playing over the entire minute of video.
I also tried changing the file into other formats. The only other one that kind of worked was .mov. It allowed the sound to work perfectly, the video loaded at correct frames, however, when playing the video on premiere, it then showed black screen for most of the clip.
Have tried to find out about this online and installed a couple different codec packs and media players, but nothing helped with this problem in Adobe Premiere. However, the clip played fine in the media players, such as RealPlayer.
If anyone has any advice on this, it would be appreciated. I would prefer to fix this issue correctly rather than have to manually interpret or transcode the footage each time I want to edit it.
Btw, I also posted this question on a forum with Nokia N8 Users, and others also tried it out and had same or similar issues. They also tried on CS5 and it still didn't work.
*UPDATE* I just tested again to change the file from .mp4 to .mov by simply renaming it, and this time it loaded perfectly into Premiere. However, I have to do this on my XP computer, as my Windows 7 doesn't change the format of file by simply renaming it. Hence, I would still like help with getting it to recognise the .mp4 correctly though in the first place, rather than having to rename my files each time on the XP computer.

Moshpit84 did you utilize the uninstallers located in Applications/Utilities/Adobe Installers to remove your installation of Premiere Pro? Also what version of the Adobe Application Manager are you currently using?

Help with Java and Regular Expression

Hello,
I have one line of Java and regular expression that I got from the web :
String[] opt;
opt = line.split("\\s+(?=([^\"]*\"[^\"]*\")*[^\"]*$)");
If "line" contains :
1 "Hello World"
this code would give me :
opt[0] : 1
opt[1] : "Hello World"
which is almost what I would like to do except for the double quotes. I wonder if someone could please help me change the regular expression so that it would return :
opt[0] : 1
opt[1] : Hello World
Thank you and Best Regards,
Chris

It looks to me like this is a line from a space delimited file so you should use one of the free CSV parsers such as http://opencsv.sourceforge.net/ . These will handle the quotes properly even if a field actually contains a quote.

Help with IE and adobe flash

when i go to download adobe flah player, i click on the
install button. When it goes to the next page a gold bar comes up.
It either says IE has blocked the installing of ActiveX control or
do you wish to install ActiveX. when it comes to installing it, i
click install it, then the adobe flash install. after that the
screen says it was successfully installed, but i recieve no video
or ability to watch thing online.

Recent crashes of certain multimedia contents (this includes Youtube videos, certain flash games and other applications) in conjunction with Firefox are most probably caused by a recent Flash update and/or a malfunctioning browser plugin such as Real Player.
In order to remedy the problem, please perform the steps mentioned in these Knowledge Base articles:
* [[Flash Plugin - Keep it up to date and troubleshoot problems]]
* [[Flash 11.3 crashes]]
* [[Flash 11.3 doesn't load video in Firefox]]
Other, more technical information about these issues can be found under these Links:
* http://forums.adobe.com/thread/1018071?tstart=0
* http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html
Please tell us if this helped!

Help with updating and Adobe Application Manager (Max OS X)

Hi,
I am a resent new customer of the cloud (student and teachers) service. I have started encounter some minor but kind of annoying technical problems. Before I registered for a cloud account I was running the Adobe Master Collection (trial) version on my MacBook Pro (Mac OS X 10.8.2). I successfully completed the registration to cloud and began to download and updated the app's. It went fine, until I came across a small little problem with Premier Pro. I was trying to import a few *.MOV files for a uni video that I have to do over Xmas.
Instead of spending time trying to figure out the problem I decide to uninstall and download/install all of the app on the my cloud hub, just incase it was something to so with my pervious installations. I couldn't directly re-download the apps via the cloud hub, so I had to re-download another trial version. However, now I can not get the Adobe Application Manager to work, I keep saying "Download Error, Please try again" I have tried it load of time, but keep getting the same message.
Please Help,
Damien

Moshpit84 did you utilize the uninstallers located in Applications/Utilities/Adobe Installers to remove your installation of Premiere Pro? Also what version of the Adobe Application Manager are you currently using?

Need help with JAVA and Listeners

Thanks to all the people who have been helping me so far. I really appreciate it. I have another question.
I am bulding a GUI where it will consist of buttons and textfields. I want the textfields to display data but also permit the user to interact, i.e. enter data into the textfield and then when the enter key is depressed my program will evaluate the data and determine to use it or throw a pop up error window. If the data is acceptable than that textfield will change accordingly and depending on the data might possibly update the two other textfields.
I know there is an ActionListener for JButtons and a MouseListener. Is there a Listener for the enter key? What would be a simple method to implement my logic? Thanks again! I really appreciate, hopefully I can become more fluent in JAVA!

Swing related questions should be posted in the Swing forum.
enter data into the textfield and then when the enter key is depressed my program will evaluate the data and determine to use it Well, JTextField supports an ActionListener, which means an ActionEvent is fired when focus is on the text and and the Enter key is used.
However, what happens if the user uses the Tab key to move from field to field, then no event is fired and the Action Event is not generated. Maybe you can use an InputVerifier which will cause the text field to be validated when the text field loses focus.
Or, maybe you are talking about activating the "Enter" button when the enter key is pressed no matter what component has focus. In this case you should be using getRootPane().setDefaultButton(...);
Your need to clarify your requirement.

Why java and adobe are not working in my mac?

I have been trying to download Java and Adobe unsuccessfully. There were working before.
When I check the applications the logos are there, but I can't open pages that require Java or Adobe.
Every time I download the programs it tells me that there where no problems with the download. When I press the bottom to verify the program it says that there was a problem. Please Help!!!!

IIf the strange SMS are coming from known contacts, that's normal for iMessages that don't arrive and are converted to text. Don't know why but it happens when my bf is overseas and his company phone can't access data - the iMessages he tries to send have a lot of symbols when they come as text but none when the finally arrive as iMessages. Usually it's mostly lots of @@@@@@.
if you didn't buy the phone new, the previous owner may still be linked to the phone and they are his/her messages you are getting. I have seen a lot of posts about this on various forums and can't remember the fix but it's to do with iTunes and you may need to contact the previous owner.
if you did buy the phone new,check with the store that it wasn't used as a demo model. They may be able to assist you setup your messages. If not, you may need to search for solutions online or hopefully someone else who's had the exact issue may be able to help you here. Good luck.

Comparision matrix of Webdynpro Java and Adobe Interactive form

Hi Experts,
In our project we have to choose the GUI between Webdynpro Java and Adobe Interactive forms. Can anyone help me out with strong comparision parameter's in order to select the right technology.
Thank you in advance.

Hi ,
Depends on your project requirement : if you project is simple and want to use less UI controls then use Adobe Interactive Forms (AIF).
But In your project needs large number of UI controls and to show huge amount of data then best option is Web Dynpro Java.
Web Dynpro provides wide varieties of UI controls for designing your web application . Adobe Interactive Forms have limited controls .
Web Dynpro take care of your Client side eventing which is not possible in AIF . AIF Developers needs to know Adobe scripting too.
If your Client data is huge AIF take so much of time to render your content and also this depends on your reader version installed on the end user too . Web Dynpro Java is Client neutral & it won't take much time to render the content.
Use AIF to show/process Business data in any Web application. ideally it is not suited for complete GUI of your project .
Regards,
Rakesh Kumar

Events problem with (Java and ActiveX)

Hi,
I use an ActiveX component with Java and i've got a problem with events.
Java classes were generated with Bridge2Java (IBM).
In order to manage events I added a listener in my application :
javaMyActiveX = new MyActiveX();
javaMyActiveX.add_DMyActiveXEventsListener(new _DMyActiveXEventsAdapter());
I also added a constructor in the _DMyActiveXEventsAdapter class and I fill the body of methods.
The ActiveX generates two types of events :
- The ones are directly generated by methods.
- The others are generated by a thread.
With MS Products (VB, Visual C++, Visual J++), I catch all events.
With java (jdk 1.4), I catch only events generated by methods.
Can anyone help me.

I'm not 100% sure, but the last time I used that bridge, it only worked if you ran your Java app within a Microsoft VM.

Help with java mapping

PI File adapter has a processing option u2018Empty-Message Handlingu2019 to ignore or Write Empty Files. In case there is no data created after mapping on target side then this option determines whether to write an empty file or not. But there is a catch to this option when it comes to using it with File Content Conversion which is described in SAP Note u2018821267u2019. It states following:
I configure the receiver channel with File content conversion mode and I set the 'Empty Message Handling' option to ignore. Input payload to the receiver channel is generated out of mapping and it does not have any record sets. However, this payload has a root element. Why does file receiver create empty output file with zero byte size in the target directory? Example of such a payload generated from mapping is as follows:
<?xml version="1.0" encoding="UTF-8"?>
<ns1:test xmlns:ns1="http://abcd.com/ab"></ns1:test>
solution :
If the message payload is empty (i.e., zero bytes in size), then File adapter's empty message handling feature does NOT write files into the target directory. On the other hand, if the payload is a valid XML document (as shown in example) that is generated from mapping with just a root element in it, the File Adapter does not treat it as an empty message and accordingly it writes to the target directory. To achieve your objective of not writing files (that have just a single root element) into the target directory, following could be done:
Using a Java or ABAP Mapping in order to restrict the creation of node itself during mapping. (This cannot be achieved via Message Mapping)
Using standard adapter modules to do content conversion first and then write file.
can someone help with java mapping that can be used in this case?

Hi,
    You have not mentioned the version of PI you are working in. In case you are working with PI 7.1 or above then here is the java mapping code you need to add after message mapping in the same interface mapping
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.io.InputStream;
import java.io.OutputStream;
import java.util.Map;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.transform.Transformer;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.dom.DOMSource;
import javax.xml.transform.stream.StreamResult;
import org.w3c.dom.Document;
import com.sap.aii.mapping.api.AbstractTransformation;
import com.sap.aii.mapping.api.StreamTransformationException;
import com.sap.aii.mapping.api.TransformationInput;
import com.sap.aii.mapping.api.TransformationOutput;
public class RemoveRootNode extends AbstractTransformation{
     public void execute(InputStream in, OutputStream out)
     throws StreamTransformationException {
// TODO Auto-generated method stub
try
     DocumentBuilderFactory factory=DocumentBuilderFactory.newInstance();
     DocumentBuilder builderel=factory.newDocumentBuilder();
     /*input document in form of XML*/
     Document docIn=builderel.parse(in);
     /*document after parsing*/
     Document docOut=builderel.newDocument();
     TransformerFactory tf=TransformerFactory.newInstance();
     Transformer transform=tf.newTransformer();
     if(docIn.getDocumentElement().hasChildNodes())
          docOut.appendChild(docOut.importNode(docIn.getDocumentElement(),true));
          transform.transform(new DOMSource(docOut), new StreamResult(out));
     else
          out.write(null);
catch(Exception e)
public void setParameter(Map arg0) {
// TODO Auto-generated method stub
public static void main(String[] args) {
// TODO Auto-generated method stub
try{
     RemoveRootNode genFormat=new RemoveRootNode();
     FileInputStream in=new FileInputStream("C:\\apps\\sdn\\rootNode.xml");
     FileOutputStream out=new FileOutputStream("C:\\apps\\sdn\\rootNode1.xml");
     genFormat.execute(in,out);
     catch(Exception e)
     e.printStackTrace();
public void transform(TransformationInput arg0, TransformationOutput arg1)
          throws StreamTransformationException {
     // TODO Auto-generated method stub
     this.execute(arg0.getInputPayload().getInputStream(), arg1.getOutputPayload().getOutputStream());
In case you are working in PI 7.0 you can use this code
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.io.InputStream;
import java.io.OutputStream;
import java.util.Map;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.transform.Transformer;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.dom.DOMSource;
import javax.xml.transform.stream.StreamResult;
import org.w3c.dom.Document;
import com.sap.aii.mapping.api.StreamTransformation;
import com.sap.aii.mapping.api.StreamTransformationException;
public class RemoveRootNode implements StreamTransformation{
     public void execute(InputStream in, OutputStream out)
     throws StreamTransformationException {
// TODO Auto-generated method stub
try
     DocumentBuilderFactory factory=DocumentBuilderFactory.newInstance();
     DocumentBuilder builderel=factory.newDocumentBuilder();
     /*input document in form of XML*/
     Document docIn=builderel.parse(in);
     /*document after parsing*/
     Document docOut=builderel.newDocument();
     TransformerFactory tf=TransformerFactory.newInstance();
     Transformer transform=tf.newTransformer();
     if(docIn.getDocumentElement().hasChildNodes())
          docOut.appendChild(docOut.importNode(docIn.getDocumentElement(),true));
          transform.transform(new DOMSource(docOut), new StreamResult(out));
     else
          out.write(null);
catch(Exception e)
public void setParameter(Map arg0) {
// TODO Auto-generated method stub
public static void main(String[] args) {
// TODO Auto-generated method stub
try{
     RemoveRootNode genFormat=new RemoveRootNode();
     FileInputStream in=new FileInputStream("C:\\apps\\sdn\\rootNode.xml");
     FileOutputStream out=new FileOutputStream("C:\\apps\\sdn\\rootNode1.xml");
     genFormat.execute(in,out);
     catch(Exception e)
     e.printStackTrace();
The code for PI 7.0 should also work for PI 7.1 provided you use the right jar files for compilation, but vice-versa is not true.
Could you please let us know if this code was useful to you or not?
Regards
Anupam
Edited by: anupamsap on Dec 15, 2011 9:43 AM

Where can I download Java and Adobe acrobat for games

Where can I download Java and Adobe Acrobat for games?

Sorry you can get flash player for iPad has flash player is dead
Not sure about java may be some one else can help you on that

Best way to update apps like Java and Adobe?

Hi guys
I just wanted to get some feedback on how best to deal with updating Java and Adobe. Of course a lot of this will be opinion and circumstance, but feedback would be useful.
The 3 methods I am focusing on here is SCUP, the App model and the Packaging model.
Thanks
NN

My environment is very sensitive to disruption (including popups), so I took the least disruptive route I could find. My solution leverages the
STATIC=1 install switch (see:
http://www.oracle.com/technetwork/java/javase/silent-136552.html). This forces a unique install directory based on the version you are installing.
Example:
C:\Program Files (x86)\Java\jre1.6.0_45
C:\Program Files (x86)\Java\jre1.6.0_51
C:\Program Files (x86)\Java\jre1.6.0_60
In the upgrade scenario it leaves the existing version alone and installs the update side-by-side. Next time the user relaunches their JAVA application it leverages the latest installed version.
When I create the update in SCUP the install argument looks like this: /s STATIC=1 IEXPLORER=1 MOZILLA=1
Following our regularly scheduled reboot window, I create a collection that has computers with both old and new versions installed. I then send out a silent uninstall for the outdated version, which in most cases is no longer in use, and therefore leaves
the user unaware that there was a change.

Discussion Forum Portlet - Problems with JAVA and UTF8?

Hi
I installed the Discussion Forum Portlet successfully. It also seems that almost everything works fine. There's only a problem if I have new posts that include special German characters (Umlaute) like ä, ö, ü or special French characters like é, è or ç. They are saved correctly in the table but if you view the post the characters are not displayed correctly.
Example
input: ça va?
result: Ã§a va?
I know that there are problems with Java and UTF8 Database. Is there a possibility to change this (bug)?
Regards
Mark

Here's what I got. I don't see anything that helps but I'm kinda new to using SQL and java together.
D:\javatemp\viddb>java videodb
Problem with SQL java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver
] Syntax error in CREATE TABLE statement.
Driver Error Number-3551
java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver] Syntax error in
CREATE TABLE statement.
at sun.jdbc.odbc.JdbcOdbc.createSQLException(Unknown Source)
at sun.jdbc.odbc.JdbcOdbc.standardError(Unknown Source)
at sun.jdbc.odbc.JdbcOdbc.SQLExecDirect(Unknown Source)
at sun.jdbc.odbc.JdbcOdbcStatement.execute(Unknown Source)
at sun.jdbc.odbc.JdbcOdbcStatement.executeUpdate(Unknown Source)
at videodb.main(videodb.java:31)
D:\javatemp\viddb>

3 tiers model with Java and Oracle.

Hi everybody. I have a problem with my work. I want to design a simple program follow 3 tiers model with Java and database is Oracle. But I do not know how I can design them. Please help me. It will better if you give some source code for each layer.
Thanks in advance.
Ky Thanh.

I'd suggest searching the net for tutorials. Pick out the things you don't know about and need to know (SQL? JDBC? Java? software design in general?) and google: tier architecture, sql tutorial, etc. Sun's Java & JDBC tutorials are at http://java.sun.com/learning/tutorial/index.html
Source for each tier? Read the JDBC tutorial and you can write the database tier source yourself. Learn Swing/Servlets/whatever you use for the user interface and you can write the top tier. The middle tier is your business logic, which is dependent on your area of business, and you'll need to know about the business and just general programming. Then if the tiers need to be distributed (hopefully not), you'll need to learn EJB or something.
I hope you haven't been given a task there you aren't ready to take on... Learning to swim by jumping into the river is a great way to learn in a school assignment, but you mention work, and learning that way at work sounds a bit risky to me.

Problem with java and pogo games

i use mozilla and now with the problems with java and hackers cannot play my pogo games,what can i do? i disabled my java i tried java 6 doesnt work or is not safe,what is a safe way to play games on pogo that use java?

Oracle has released a Java 7 Update 11 to address security vulnerabilities and you should update to that version.
*https://support.mozilla.org/kb/how-to-use-java-if-its-been-blocked
See also:
*http://kb.mozillazine.org/Java#Windows_installation_issues
You can find the latest Java version on the Oracle website.
See Java Platform > Java SE 7U11 and Java 6U38 (Download JRE)
*http://www.oracle.com/technetwork/java/javase/downloads/index.html

Help with java and adobe

Similar Messages

Maybe you are looking for