Help with jfree regarding plotting multiple lines in a line graph
hi,
i have
< time>
< volume>
i have sucessfully used this data to plot a line graph(1 line)
now i have
<time> <time2>
<volume> <volume2>
how do i put this values into a single line graph? that means, i will have a line graphs with 2 lines.
Help appreciated. Thanks Alot
any help? still need help. thanks
Similar Messages
-
I have a "Contact" organization issue I need help with. I organize multiple customers under their account affiliation. I place the people with their contact info under each account name by their dept/role in the notes section of their account. I am looking to be able to directly dial / email from this info in yet notes section located within a contact. On Blackberry, the notes area entered in a contact can connect directly but on the iPhone those numbers/emails are inactive. I am trying to avoid having to create each of these individuals as a separate contact and keep them under their account affiliation. It is easier to find them. This does not seem like that complicated of a request and hoping someone can tell me how or share an app that will enable the "notes" within a contact be "active". Hope this makes sense.
I seem to recall that this question has been asked before and I'm pretty sure that the answer is that you can't do what you want to do with the native contact app. However, there are lots of contact apps out there that pull from the built app's data but have other features. Perhaps one of them would meet your needs.
-
Help with POST data if multiple selections are chosen
I've created a form with a menu (list) that includes all 50
states. I'm using the POST option, along with PHP, to process the
form data, which will be emailed to me. The list-menu looks like
this:
http://askdave.info/help/states_menu.gif
and I have "Allow Multiple Selections" checked in the Property
Inspector.
If the user chooses multiple states, I want
EACH of those states to be listed in the email that I
receive. Right now, if I check multiple states, I only get
the very last state that's selected. For example, here's the
email I get after I check 5 different states.
http://askdave.info/help/formdata.gif
Problem--> In this email, only one state is listed
(Hawaii) even though I selected 5 different states. How do I get
the form data to list ALL states that are checked?
Here is what I have:
<form name="form1" method="post" action="process.php">
<input type="hidden" name="required"
value="name,phone,email,states,capital" />
And then for the menu that lists the states, I have:
<label>
<select name="states" size="7" multiple id="states">
<option>All States</option>
<option>Alabama</option>
<option>Alaska</option>
<option>Arizona</option>
<option>Arkansas</option>
and so on...
What am I missing? How do I get the PHP script to send
multiple values, if multiple values are chosen? (I'm new to PHP, so
go easy on me. I can post my code, if necessary.) Is this a PHP
issue, or do I need to add something to the HTML form?Hi,
>>
I think DynaForm stands for Dynamic Form
>>
this makes some sense ;-) I was just wondering because there
is a pre-made script called DynaForm
here, but
it has a different "logistics" than yours.
However, both "DynaForm" versions are pretty basic, as they
just deal with non-multiple values - form fields like single line
input fields, texareas and non-multiple select´s. Your script
e.g. just loops through all existing form fields using the
"foreach" method:
//Pulls form fields & values.
foreach ($this->post as $field => $value) { // looping
through all form fields
if ( $field == 'required' ) continue;
$this->_addLine($field, $value); // here´s where the
field´s name/value consolidation happens
...and simply consolidates a field´s "value" with its
associated "name". The problem is : this method just works for
fields having just 1 value -- but any "multiple value" form fields
(e.g. your "states" select or checkbox groups which can pass
multiple values as well) actually require a separate "foreach"
treatment within the script, and this hasn´t been incorporated
here.
That said, I suggest using an other pre-made solution like
PHP
Form Mail script that´s capable to handle your multiple
values - scenario innately. -
Help with Contacts - IDs and Multiple Accounts
Hello
I am involved in the process of migrating accounts and contacts into ByDesign, but have come across a couple of questions that I can't seem to find an answer to anywhere!
Firstly, is it possible to specify the 'Contact ID' reference range. I have found how to set the Account ID for suppliers and customers, and also how to set the Employee ID for employees within Fine Tuning, but cannot seem to find the same feature for the Contact ID. Is it possible to set this field up to have a certain amount of digits, and between certain values when automated?
My other question regards having contacts linked to more than one account. I understand it is possible to have a contact linked to multiple accounts, but how? Is it possible from the Migration Templates? Is it a simple case of using the same Contact ID and information, but differing Account IDs on the 'Contacts' tab of the Template?
Any help is much appreciated.
Thanks
AndrewYou should not be using some other user's icloud account on your devices. That's not how icloud is designed, because if you edit/delete data on the device that ties to the other user's icloud account, then those changes will automatically sync to their devices - something I don't think you two want happenning.
If you want to keep your work data separate from personal data, then depending on what databases you want to use, like contacts or calendars, you could use a single icloud account and define groups in contacts, for exampe, some for work and some for personal. Same thing with calendars, define different calenders for each environment. Some databases like email may be problematic, however, I would think that work emails involve a non-icloud email account, so you could use the icloud email for personal use.
The other approach is to define and use two icloud accounts and for each device, decide which account to use. Having one device that uses both work and personal data would be a problem. -
Help With split tunneling and multiple subnets behind asa
Hello All,
our vpn clients can no longer access internet while connected to vpn.
I was hoping I could get an answer on here for an issue we are having. let me explain this with as little words as possible.
here was old network layout:
ASA
192.168.1.1 ----> the rest of the internal subnet (was only subnet in network)
now
ASA 3560
192.168.254.1/24 ----->192.168.254.2/24-->192.168.1.1/24
192.168.2.1/24
so what we did was route from 3560 to asa so we would be able to have multiple subnets since our asa has base license.
Our vpn with easy connect worked with our split tunneling before and now we made the change above and it no longer works. Can someone help me out as to why it no longer works and what changed need to be made to make it work.
Thank you.
ciscoasa# sh run
: Saved
ASA Version 8.2(2)
hostname ciscoasa
enable password 1N7bTm05RXLnBcUc encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.254.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address x.x.x.x 255.255.255.248
interface Ethernet0/0
switchport access vlan 2
ftp mode passive
clock timezone est -5
same-security-traffic permit intra-interface
access-list NoNat extended permit ip any 172.16.5.0 255.255.255.0
access-list SplitTunnel standard permit 192.168.1.0 255.255.255.0
access-list SplitTunnel standard permit 192.168.2.0 255.255.255.0
access-list SplitTunnel standard permit 192.168.254.0 255.255.255.0
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool VPNPool 172.16.5.1-172.16.5.254 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list NoNat
nat (inside) 1 0.0.0.0 0.0.0.0
route outside 0.0.0.0 0.0.0.0 x.x.x.x 1
route inside 192.168.1.0 255.255.255.0 192.168.254.2 1
route inside 192.168.2.0 255.255.255.0 192.168.254.2 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set TransformSet1 esp-3des esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map DynamicMap1 1 set transform-set TransformSet1
crypto map MainMap 999 ipsec-isakmp dynamic DynamicMap1
crypto map MainMap interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet 0.0.0.0 0.0.0.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server 64.90.182.55 source outside
webvpn
enable outside
svc image disk0:/anyconnect-dart-win-2.5.0217-k9.pkg 1
svc enable
tunnel-group-list enable
group-policy RenotreUsers internal
group-policy RemoteUsers internal
group-policy RemoteUsers attributes
vpn-tunnel-protocol svc webvpn
split-tunnel-policy tunnelspecified
split-tunnel-network-list value SplitTunnel
tunnel-group RemoteUsers type remote-access
tunnel-group RemoteUsers general-attributes
address-pool VPNPool
default-group-policy RemoteUsers
tunnel-group RemoteUsers webvpn-attributes
group-alias Southeast-Security-VPN enable
tunnel-group RemoteUsers ipsec-attributes
pre-shared-key *****I think it could be your NAT statement. You should try an avoid using any unless you tunnel everything. Try making this change
no access-list NoNat extended permit ip any 172.16.5.0 255.255.255.0
object-group network INTERNAL_NETWORKS
description Internal Networks
network-object 192.168.1.0 255.255.255.0
network-object 192.168.2.0 255.255.255.0
network-object 192.168.254.0 255.255.255.0
access-list NoNat extended permit ip object-group INTERNAL_NETWORKS 172.16.5.0 255.255.255.0
You may have to re-add your NAT0
nat (inside) 0 access-list NoNat -
Help with sending emails to multiple users.
Currently we have a process to send mail to muliple users by looping through the list of users and sending each individual an email
<Action id='1' name='sendEmail' application='com.waveset.provision.WorkflowServices'>
<Argument name='op' value='notify'/>
<Argument name='template' value='$(template)'/>
<Argument name='toUser' value='$(tuser)'/>
<Argument name='catch' value='notificationException'/>
</Action>
The variable tuser contains a single email address.
Is there any way to setup tuser to contain multiple email addresses?
I have tried passing a list and a string separated by colons (ex: <s>[email protected]; [email protected]</s>) and neither one works.
Question 2
Is it a bad idea to try and send email to up to 50000 users at once using IDM? Besides the fact that I would need to search for specific users and get their email addresses based on their capabilities.Hi,
For sending emails to multiple users, use to instead of toUser. Put the names in comma seperated values
<Action id='0' application='com.waveset.provision.WorkflowServices'>
<Argument name='op' value='notify'/>
<Argument name='template' value='$(template)'/>
<Argument name='to' value='$(to)'/>
<Argument name='cc' value='$(cc)'/>
<Argument name='catch' value='notificationException'/>
</Action>
You can use IDM to send emails.
it will be a good idea to break down the email that you are sending into groups/batches. If possible, you can send email to DL s
Else, you can segregate the users based on roles and send emails. This will reduce the load. Hope it helps
Regards
Arjun
Edited by: arjun.sengupta on Dec 4, 2012 3:26 AM -
Need help with Adobe documents - emailing multiple PDFs
Can anyone out there help an old man? I'm new to all things Adobe but the only thing I can't seem to master is sending multiple PDFs in a single email, from Adobe documents. What am I missing here?
Hi Craig,
You can either Create a pdf portfolio of those files and send a single file to the user or you can select all the files you want to send at once while uploading and then send them in one go.
Please revert back if you still face challenges in sending multiple pdf files at once.
Regards,
Rahul -
Help with rounding to nearest multiples of n-1 !!
i need help writing part of a program;
start with int n, then round ***up*** to the nearest multiple of n-1; then round **this** value up to the nearest multiple of n-2. (the final step is to round up to the nearest multiple of 2)
eg
if n=10;
9 -> 18
8->24
7->28
6->30
2->34.
Please help me with this, i'm really not sure where to begin !it's a program to do with the approximation of pi;
so far i have;
public double pi (int n) {
double f; (this is the final value of the nearest
multiple of 2)
then from here i'm really not sure how to go about
it..... in other words i haven't gotten very far.Okay. I'm currious as to how this helps in the approximation of PI. Would you mind posting that?
I'll give you a few hints. The mod operator "%" tells you the distance a number is from the multiple of n immediately bellow a positive number.
The Math.IEEERemainder function tells you the distance a number is from the nearest multiple of n (whether above or below).
I'll leave it to you to figure out how to find the nearest multiple ABOVE the number, and how to use that to round the number. It's actually not all that hard.
- Adam -
Help with a query.. (multiplication / division)
Hi All, i have this data example
CREATE TABLE "TB_CONVERSION_UNIDAD_TMP"
("ID_PRODUCTO" NUMBER,
"FLG_OPERADOR" CHAR(1 BYTE) NOT NULL ENABLE,
"NUM_FACTOR" NUMBER(10,6) NOT NULL ENABLE);
Insert into TB_CONVERSION_UNIDAD_TMP (ID_PRODUCTO,FLG_OPERADOR,NUM_FACTOR) values (null,'M','0,0001');
Insert into TB_CONVERSION_UNIDAD_TMP (ID_PRODUCTO,FLG_OPERADOR,NUM_FACTOR) values (null,'D','1');
Insert into TB_CONVERSION_UNIDAD_TMP (ID_PRODUCTO,FLG_OPERADOR,NUM_FACTOR) values (null,'M','1');
Insert into TB_CONVERSION_UNIDAD_TMP (ID_PRODUCTO,FLG_OPERADOR,NUM_FACTOR) values (null,'M','2');
Insert into TB_CONVERSION_UNIDAD_TMP (ID_PRODUCTO,FLG_OPERADOR,NUM_FACTOR) values ('79','M','1');
Insert into TB_CONVERSION_UNIDAD_TMP (ID_PRODUCTO,FLG_OPERADOR,NUM_FACTOR) values ('17','M','100');
Insert into TB_CONVERSION_UNIDAD_TMP (ID_PRODUCTO,FLG_OPERADOR,NUM_FACTOR) values ('16','M','10');
Insert into TB_CONVERSION_UNIDAD_TMP (ID_PRODUCTO,FLG_OPERADOR,NUM_FACTOR) values ('16','M','1');
Insert into TB_CONVERSION_UNIDAD_TMP (ID_PRODUCTO,FLG_OPERADOR,NUM_FACTOR) values ('78','D','48');
Insert into TB_CONVERSION_UNIDAD_TMP (ID_PRODUCTO,FLG_OPERADOR,NUM_FACTOR) values ('18','D','100');
Insert into TB_CONVERSION_UNIDAD_TMP (ID_PRODUCTO,FLG_OPERADOR,NUM_FACTOR) values (null,'M','1');
Insert into TB_CONVERSION_UNIDAD_TMP (ID_PRODUCTO,FLG_OPERADOR,NUM_FACTOR) values (null,'M','11');
Insert into TB_CONVERSION_UNIDAD_TMP (ID_PRODUCTO,FLG_OPERADOR,NUM_FACTOR) values (null,'M','1111');
Insert into TB_CONVERSION_UNIDAD_TMP (ID_PRODUCTO,FLG_OPERADOR,NUM_FACTOR) values ('126','D','1111,19');
Insert into TB_CONVERSION_UNIDAD_TMP (ID_PRODUCTO,FLG_OPERADOR,NUM_FACTOR) values ('40','D','2');
COMMIT;
/I want get the num_factor columns where's the condition i send is id_producto then validate if the column FLG_OPERADOR is 'M' or 'D' for the multiplication or division with the another parameter i send (val).
so far i got this:
set serveroutput on;
DECLARE
intFactor number(8,2);
intID_Producto NUMBER(10):=126;
strFlg_Operador CHAR(1);
Cant number(8,2);
Val number(8,2):=100;
BEGIN
select num_factor into intFactor from TB_CONVERSION_UNIDAD_TMP where id_producto=intid_producto and rownum=1;
select flg_operador into strFlg_Operador from TB_CONVERSION_UNIDAD_TMP where id_producto=intid_producto and rownum=1;
if (strFlg_operador='M') then
Cant:=Val*intFactor;
else
Cant:=Val/intFactor;
end if;
dbms_output.put_line('Factor :' || to_char(intFactor) || ' Operador ' || strFlg_Operador || ' Total : ' || to_char(Cant));
END;Thanks for the help.Wrong forum!
This is the sql developer forum and is not for sql or pl/sql questions.
Please mark this question ANSWERED and if the below doesn't answer your question repost the question in the sql and pl/sql forum.
>
I want get the num_factor columns where's the condition i send is id_producto then validate if the column FLG_OPERADOR is 'M' or 'D' for the multiplication or division with the another parameter i send (val).
>
You've got a good start. Now you just need to BULK COLLECT the data and loop thru it. By the way you don't need two separate queries.
set serveroutput on;
DECLARE
intFactor number(8,2);
intID_Producto NUMBER(10):=126;
strFlg_Operador CHAR(1);
Cant number(8,2);
Val number(8,2):=100;
type tbl_factor is table of number(8,2);
type tbl_flg is table of char(1);
t_factor tbl_factor;
t_flg tbl_flg;
intID1 NUMBER(10):=40;
BEGIN
select num_factor into intFactor from TB_CONVERSION_UNIDAD_TMP where id_producto=intid_producto and rownum=1;
select flg_operador into strFlg_Operador from TB_CONVERSION_UNIDAD_TMP where id_producto=intid_producto and rownum=1;
if (strFlg_operador='M') then
Cant:=Val*intFactor;
else
Cant:=Val/intFactor;
end if;
dbms_output.put_line('Factor :' || to_char(intFactor) || ' Operador ' || strFlg_Operador || ' Total : ' || to_char(Cant));
select num_factor, flg_operador bulk collect into t_factor, t_flg
from TB_CONVERSION_UNIDAD_TMP where id_producto=intid1;
for i in 1..t_factor.count loop
if (t_flg(i)='M') then
Cant:=Val*t_factor(i);
else
Cant:=Val/t_factor(i);
end if;
dbms_output.put_line('Factor :' || to_char(t_factor(i)) ||
' Operador ' || t_flg(i) || ' Total : ' || to_char(Cant));
end loop;
END;
/ -
Help with header field on multiple pages
I am trying to print three multiple page documents. The first document in the dat file has data in a header comment field. The last two documents in the dat file do not have data for the header comment field. On the form I have defined this comment field as global. When I print the documents the first document comment is being printed on the last two documents that should not have comments.
If I remove the global condition for the comment field, then the comment is only printed on the first page of the first multiple page document. Is it possible to print the comment on each page of the first multiple page document and not print the comment on the documents that should not have a comment? Thanks for any help.Got it. Thank you. I'm having one other problem though. I
keep getting this bizare message every time i save or try to use
the template:
The is an error at line 41 column 7 (absolute position 2486)
of "~pathandfilename.dwt": Nested editable regions
The only thing at line 41 is the <body> tag. I took all
the formating out to try to trim this out... any thoughts about
this one.
Thanks G -
Need help with displaying content on multiple pages
Hi I'm kind of a dreamweaver newbie and i'm a little in over
my head. I'm trying to design a web site with the same content
appearing on multiple pages. Here's the current site...
http://home.comcast.net/~gascec/cecnh20/index.html
I'm trying to establish the top bar and side bars of links
and the logo on each page from one point so i don't have to change
forty pages if i update a link.
I know there's a way to do this and i thought it was using a
CSS page but i can't figure it out and i'm running out of time.
HelpGot it. Thank you. I'm having one other problem though. I
keep getting this bizare message every time i save or try to use
the template:
The is an error at line 41 column 7 (absolute position 2486)
of "~pathandfilename.dwt": Nested editable regions
The only thing at line 41 is the <body> tag. I took all
the formating out to try to trim this out... any thoughts about
this one.
Thanks G -
Need help with Replace Metadata then multiple Save script
I am attempting to create a javascript to run on a folder of PSDs. I need it to:
1. Replace image Metadata with an existing Metadata Template called "UsageTerms".
2. Play an existing Action "Prep_PrintRes". (The action sharpens and converts to 8-bit)
3. Append "_PrintRes" to the filename. (ie OriginalPSDName_PrintRes.jpg)
4. Save the file as a 12 Quality JPEG to specific folder on my hard drive, "D:/Transfer".
5. Play an existing Action "Prep_Magazine" (The action resizes, sharpens, and converts to CMYK)
6. Append "_Magazine" to the filename. (ie OriginalPSDName_Magazine.jpg)
7. Save the file as a 10 Quality JPEG WITH NO EMBEDDED PROFILE to "D:/Transfer".
8. Play an existing Action "Prep_Screen". (The action sizes, sharpens, and converts to sRGB)
9. Append "_ScreenRes" to the filename (ie OriginalPSDName_ScreenRes.jpg)
10. Save the file as an 8 Quality JPEG to "D:/Transfer"
If anyone is available to help me get started with this I would greatly appreciate it. I can do a minimal amount of Visual Basic but Javascript is alien to me. Thanks so much!Try the following as the custom calculate script:
// Sum the field values, as numbers
var sum = +getField("LaborCost").value;
sum += +getField("MaterialCost").value;
sum += +getField("EquipmentCost").value;
// Set this field value
event.value = sum > 0 ? sum : 0;
For the other one, change the last line to:
event.value = sum < 0 ? sum : 0; -
hi Labviewers,
I'm using the the 'Plot multi-xy.vi' to display a frequency sweep and several limit lines. I got my app work today but when I finished I realized the display is too small.
When I enlarge the window of the graph on my frontpanel only the size of the window itself changes but not the size of chart.
I searched for an option but couldn't find it.
Thanks in advance
SimonThe ouput of "Plot multi-xy.v" is actually a picture!
You are just resizing the picture indicator, the size of the image is programmatically set.
The VI has an input connector to set the size of the picture. Create a constant at the "dimensions (w,h)" terminal and enter the desired size in pixels(e.g. 400 and 400).
Good luck!
LabVIEW Champion . Do more with less code and in less time . -
Help with sql query for multiple years
Hello,
I am new to SQL and am trying to perform a query that includes multiple years from 2005 to 2011.
I was trying to enter the following query but received a message that said "Operand should contain 1 column(s)"
SELECT * FROM `auto_2` WHERE `year` LIKE (2005, 2006, 2007, 2008, 2009, 2010, 2011);
What am I doing wrong here? Please advise...
ThanksHi and welcome to the forum,
You cannot use LIKE here, that is for pattern matching.
You need either IN operator, or less known =ANY.
Regards
Peter -
Help with running iWeb on multiple computers and find the current site
I have two Macs and MobileMe. I have usually run iWeb on the laptop and have my website on it. I thought I saved the site in MobileMe. When I go to the desktop and open iWeb it opens up an old version of my site. I search for Domain and none of the options are the current site. On my laptop (the current iWeb version) I opened MobileMe's iDisk and tried a couple of the "Domains" that live on it and none of them are the current version. Now, I can't even get my laptop to open the one I had opened a few moments ago beacuse I can't find the newest domain. So, where is my current domain/ I can't find it.
I do have a folder on iDisk called "Sites" that contains the HTML files and folders of my current site but I can't seem to get this to open in iWeb. But, this folder does contain the current version but none of the Domain files I have opened refer to these I guess.
What should I do?
Guy
PS I am running the latest iWeb on both computersWelcome to the Apple Discussions. As you know for both of you to edit and update the web site both of you must be using the same version of iWeb and working on the same Domain.sites2 file.
See MacWorld's online article Managing an iWeb site from multiple Macs. However, there are a couple of caveats: 1 - only one can be editing and uploading at a time; 2 - allow plenty of time for Dropbox to update all copies of the domain file.
What I would do is when you plan on editing the site copy the domain file that's in your Dropbox as a backup. Do you editing and publish. If something goes wrong you'll have the good domain file that was copied just before you started editing. If the site is small and, thus, the domain file the updating will be better insured. Keep both computers online much of the time so the updates will go thru as soon as they are made.
OT
Maybe you are looking for
-
IPod not detected by iTunes OR Windows Vista
Hi all, Running Vista and latest version of iTunes 7.6.1 All of a sudden, iTunes has stopped detecting my iPod nano 2nd gen. Vista also does not detect the iPod though it does charge. Tried other USB ports. Unistalled iTunes and carried out all the a
-
How do I setup a php testing server that connects to my web host?
My web host (webhostingpad.com) has php on it. I need to setup a testing server that connects to this so I can test my site locally. My questions are: 1. Do I set this up as a local network connection or an sftp (same as my remote)? 2. what informati
-
Has anyone created a 400Mbps firewire connection to a PC?
Has anyone been able to successfully create a 400Mbps firewire connection (as opposed to 100Mbps) between a Mac and a PC? I've been trying to connect my G4 1.5Mhz Powerbook (bought last May) to a HP Pavillion d4100e (AMD dual core processor) running
-
After updating to automatic firefox 10.0 I cannot use open in new window. Why ?
Tried to "open link in new window" on several sites after automatically updating to 10.0 . Windows links will not open in new window.
-
Another HDV to DVD thread..Bonsai! please Read
Hey guys, So I just finished my first HDV edited project. I shot it with a Z1U, edited it nativiely and its a 45 minute video, its huge. I have a ton of graphics from livetype (great little program) throughout the video as lowerthird fonts for here a