Help with keyboard issue - some works, some doesn't. :(
Hi all - I hope someone can help me out. I have a iBook G4 that had worked like perfection up until yesterday, that's when my keyboard issue started.
Here's the issue:
The top row (function keys, num lock, volume, display) works just fine, the cap button light is stuck on - cannot be changed, and nothing else on the keyboard functions.
Here's what I've tried:
1) tried a restart - no changed
2) shut down and removed, checked, and then reinstalled the battery - no change
3) popped out keyboard to check underneath for debris, etc and then replaced back - no change
4) tried pressing down on each key to see if one was stuck - no change
5) tried to see if resetting my PMU would help (not sure if it actually took since I have to use the keyboard buttons + the power button), in any case it shut down, when I restarted still no change
6) called Apple tech - they put me in DOS (so apparently my "s" and apple key work) - however at the first prompt area my keyboard automatically began typing FFFFFFFF over and over again until the DOS command area was full, to which my iBook just sent me back into my op system/desktop.
This leads me to think something is just up with my cap and f key, however still no change in the situation.
7) going to the Apple store tomorrow.....
So has anyone encountered this? Is this something I can fix for free? My APP has expired by just 2 months and I am hoping I can avoid forking out money for this.
Any help would be greatly appreciated. Thanks in advance.
Well, sorry about the delay in reading or replying to your post about this
keyboard issue; if you had an external standard Apple USB keyboard
(the white kind) on hand, that would've been good to see if the issue
was possibly just the computer's built-in keyboard. That also would've
given you the opportunity to choose keyboard commands to try and
work around that issue, if (by chance) the iBook's keyboard wasn't bad.
Single-user mode, or terminal/console, can give you access to the
system behind the graphic user interface of the OS X; or BSD unix.
That may look like DOS, but it isn't anyone's quick n dirty OS...!
Hopefully you were able to resolve the issue in a satisfactory manner
after traveling to the Store. What were they able to say or do about it?
Good luck & happy computing!
Similar Messages
-
I cannot upgrade my Mac to Mountain Lion, OS X 10.8 and cannot buy a new Mac so will upgrading from
OS X 10.5 to OS X 10.7 help with this issue?If you are going tob e upgrading to 10.7 you should be able to just upgrade, and then install future updates of Firefox with no problem.
-
Is there a phone number I can call to talk to a live person about help with Lightroom issues ?
Is there a phone number I can call to talk to a live person about help with Lightroom issues ?
well the reason I wanted to talk to someone live because it would take forever to explain everything on here But anyway, here goes. I have an HP Pavilion Notebook with Intel Core i5-323om CPU @2.60 GHz and 8 gb ram 64bit. I am trying to run Lightroom 5.7 on my laptop and having major issues. I use an external hard drive for the storage of my photos. When I try to use Lightroom I run into many issues: Flickering of the screen, freezing up, slow, the loading circle just goes round and round lol. If I go to the washroom or leave the computer for even a minute it freezes up. I have to keep pressing Ctr/alt/delete to bring it back when it flickers. I have to constantly exit out of the program and restart it to be able to edit even just a couple of photos and then it starts acting up again.
I have tried un-installing and re-installing, updating everything on my pc, changing compatibility settings, updating development settings, I even took the laptop into have it looked at and they did all kinds of updates etc...and still couldn't figure out why it wasn't working for me. I have gone through the lists of troubleshooting for LR problems and there just seem to be nothing that works.....I have made new catalogues, moved them, tried using the software on my pc without the EHD, etc etc.......I have tried EVERYTHING...I think.....so I was looking for some answers as to why this is happening.... -
Can some one help with these issues? Thanks.
Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.
-
Hi can anyone help with this issue regarding my wireless magic mouse? When im on google chrome and scrolling down the page i always have youtube running in the background but the audio cuts/spits/pops can anyone help me with this?
The figures you mention only make sense on your intranet. Are you still using the same wireless router. The verizon one is somewhat limited as far as max wireless-n performace. For one thing it only has a 2.4 radio. I like many people who wanted wireless-n performance before they even added a wireless-n gigabit router, have my own handling my wireless-n network.
-
Since updating to FF 8 I can no longer use Multi-row book marks, can anyone help with this issue? the one I used is here http://multirowbookmarkstoolbar.com/
Try the support site:
*http://multirowbookmarkstoolbar.com/forum
*Multirow Bookmarks Toolbar Plus: https://addons.mozilla.org/firefox/addon/multirow-bookmarks-toolbarplus/ -
Can anyone help with this issue.... intermittent sound from apple tv
Can anyone help with this issue?..watched the trailer of a movie with sound, then downloaded and went to watch it, but no sound and this message was displayed:"an incompatible audio signal has ben received.check the output device" tv is a sharp aquos
I don't know if this will help but have you tried switching the audio output to 16-bit? On the AppleTV, click Settings, Audio & Video, Audio Output. The two choices are "auto" and "16-bit". Good luck!
-
Help! Keyboard randomly stops working only with finder?
My macbook pro keyboard and my silver Apple bluetooth keyboard (primary keyboard) randomly stop working in Finder can anyone explain? Heres the details:
I usually use my wireless keyboard, and when this happens the keyboard keeps working with everything else, and only stops working in Finder i.e. I can't edit the names of files or even click through files with the arrow keys. (the Macbook Pro keyboard also stops working-only in Finder-during these times too as I just tested..)
Also, Finder keeps working its not frozen or anything, I can click around in it with the mouse and open files/apps, etc.
This has only happened approximately 3 or 4 times (I've had the keyboard since the new ones were released and the computer for 1.5 yrs)
Lastly, when I restart the OS (10.4.11) the problem disappears for a week or more..
help!
Message was edited by: coolskierguyjazzi wrote:
Michael, I recommend you http://wiki.Archbang.org which is derived from Archlinux.
2 years past, everything is nice to me, it can help you get rid of the installation pain.
Don't do that. Archbang isn't Arch and it doesn't "get rid of installation pain," it just turns it into long term confusion and dependence... -
Old version of itunes to help with burning issue.
I first downloaded itunes about a year and a half ago(Feb of 2005). I cannot remember what version it was. Everything worked fine and burning music cds was a piece of cake. About 6 months later I downloaded a later version of itunes and my problem with being unable to burn cds began (error 2123). I have tried about everything I can think of to fix it. I have posted on this forum before. There have been some people on it that have tried to help but nothing seems to work. I've tried contacting Apple but that's been a deadend street(if anyone knows how to get a real person on the phone at Apple please let me know). I've contacted the drive's manufacturer and they have tried to be helpful but they, as I, believe it's an issue with the itunes software. I think the only way I'm going to get this problem fixed is one of three things. First, try to find a new drive that's compatable. Secondly, find a way to install an old version of itunes without losing everything on my machine and my ipod. Thirdly, stop using itunes altogether. Has anyone run into this problem and found a solution? Any help would be greatly appreciated.
TJHey, I had the exact same problem. Is your drive an AOpen drive? If so, I read somewhere that their site admits that two of their DVD Rewriter drives do not work with ITunes 6.
You can install old ITunes versions at oldapps.com. However, I installed version 5 and it's now saying I need an upgraded version to play or burn these songs. Let me know if you figure anything out. -
Need a little help with a Jbutton not working out the way I planned
The following code is to fulfill an assignment I am working on. The problem I am having is with the btnCalc. For some reason when the button is used, the results I get is from another button. I think the variables are set right for the program to function properly but I am really hung up on this. Do anyone have any suggestions?
import java.awt.*; //Contains classes for creating GUI
import java.awt.event.*; //For listener events
import javax.swing.*; // Imports the Main Swing Package
import javax.swing.event.*;
import javax.swing.text.*; // Positions text box
import java.text.NumberFormat; // For number format such as currency
import java.text.*; // Imports the Main Text Package
import java.util.*; // Utility Package
public class MPC extends JFrame implements ActionListener //Creates Class for MPC
//double dblLoanAmount, dblInterestRate, dblMonthlyPayment;
TextField txtTotalMort;
//JButton fixRates = new JButton("Choose Fixed Rates");
JLabel lblTotalMort = new JLabel("How much is the loan?"); // Label for dblLoanAmount amount
JTextField txtYears = new JTextField(10);
JLabel lblPayment = new JLabel("Your monthly payment is "); // Label for Payment
JTextField txtPayment = new JTextField(10);
JLabel lblYears = new JLabel("How many years?");
// add(lblYears);
JTextField txtYearsInput = new JTextField(10);
//a dd(txtYears);
JLabel lblInterestRate = new JLabel("What is the interest rate?");
//add(lblInterestRate);
JTextField txtInterestRate = new JTextField(10);
//add(txtInterestRate);
//JLabel lblPayment = new JLabel("Your monthly payment is:");
//add(lblPayment);
//JTextField txtPayment = new JTextField(10);
//txtPayment.setEditable(false);
//add(txtPayment);
JButton btnCalc = new JButton("Calculate");
//add(btnCalc);
//btnCalc.addActionListener(this);
JButton year7InterestRateBtn = new JButton("7 years at 5.35%"); // Mortgage Term and Interest Rate
JButton year15InterestRateBtn = new JButton("15 years at 5.50%");
JButton year30InterestRateBtn = new JButton("30 years at 5.75%");
JButton reset = new JButton("Clear All");
JTextArea boxSpace = new JTextArea(100,200); // Morgtage table size
JScrollPane scroll = new JScrollPane(boxSpace); // ScrollPane
public MPC() // Method
super("MPC"); // Frame Title
JMenuBar mb = new JMenuBar(); // Menu Bar
setJMenuBar(mb);
setSize(325, 500); // Frame Size
JPanel pane = new JPanel();
pane.setLayout(new BoxLayout(pane, BoxLayout.Y_AXIS)); //Grid box configuration
Container grid = getContentPane();
grid.setLayout(new GridLayout(8,2,8,8)); // Grid Layout
pane.add(grid); // Adds grid
pane.add(scroll); // Adds scrollPane
grid.setBackground(Color.white);
Setting color of text and backgrounds
txtYears.setBackground(Color.white);
txtYears.setForeground(Color.black);
txtYears.setFont(new Font("Arial", Font.PLAIN, 10));
txtPayment.setBackground(Color.white);
txtPayment.setForeground(Color.black);
txtPayment.setFont(new Font("Arial", Font.PLAIN, 10));
boxSpace.setBackground(Color.white);
boxSpace.setForeground(Color.black);
boxSpace.setFont(new Font("Arial", Font.PLAIN, 10));
grid.add(lblYears);
grid.add(txtYearsInput);
grid.add(lblInterestRate);
grid.add (txtInterestRate);
grid.add(lblTotalMort); // Adds the Mortgage Amount Label
grid.add(txtYears); // Adds the Mortgage Amount Text Field
grid.add(lblPayment); // Adds the Payment Label
grid.add(txtPayment); // Adds the Monthly Payment Text Field
txtPayment.setEditable(false); // Disables editing in this Text Field
grid.add(btnCalc);
grid.add(year7InterestRateBtn); // Adds 1st Loan and Rate Button
grid.add(year15InterestRateBtn); // Adds 2nd Loan and Rate Button
grid.add(year30InterestRateBtn); // Adds the Exit Button
grid.add(reset); // Adds the New Calc Button
setContentPane(pane); // Enables the Content Pane
setVisible(true); // Sets JPanel to be Visable
reset.addActionListener(this); // Adds Action Listener to the New Calc Button
txtYearsInput.addActionListener(this);
txtInterestRate.addActionListener(this);
btnCalc.addActionListener(this);
year7InterestRateBtn.addActionListener(this); // Adds Action Listener to the 1st loan Button
year15InterestRateBtn.addActionListener(this); // Adds Action Listener to the 2nd loan Button
year30InterestRateBtn.addActionListener(this); // Adds Action Listener to the 3rd loan Button
txtYears.addActionListener(this); // Adds Action Listener to the Mortgage Amount Text Field
txtPayment.addActionListener(this); // Adds Action Listener to the Monthly payment Text Field
public void actionPerformed(ActionEvent e) // Tests to Verify Which Button is Pressed
Object command = e.getSource(); // Enables command to get data
int intYears = 0; // Declares intYears
double dblLoanAmount, dblInterestRate, interestRate, intRate;
if (command == year7InterestRateBtn) // Activates the 1st Loan Button
intYears = 0; // Sets 1st value of Array
if (command == year15InterestRateBtn) // Activates the 2nd Loan Button
intYears = 1; // Sets 2nd value of Array
if (command == year30InterestRateBtn) // Activates the 3rd Loan Button
intYears = 2; // Sets 3rd value of Array
if (command == btnCalc)
//dblLoanAmount = Double.parseDouble(txtTotalMort.getText() ); // Loan amount
//interestRate = Double.parseDouble(txtInterestRate.getText() ); // /100 )/ 12; // Devides rate
intRate = (Double.parseDouble(txtInterestRate.getText() )/100 )/ 12;
//int intYearsMonths = Integer.parseInt(txtYearsInput.getText() );// * 12; //Multiplies loan length
int months = Integer.parseInt(txtYearsInput.getText() )* 12;
dblLoanAmount = 0; // Declares and Initializes dblLoanAmount
dblInterestRate = 0; // Declares and Initializes dblInterestRate
double [][] dblTrmLoanRate = {{7, 5.35}, {15, 5.50}, {30, 5.75},}; // Array Data for Calculation
try
dblLoanAmount = Double.parseDouble(txtYears.getText()); // Gets user input from txtYears Text Field
catch (NumberFormatException nfe) // Checks for correct user input
JOptionPane.showMessageDialog(null, "You must enter a valid number.", "MPC", JOptionPane.INFORMATION_MESSAGE);
return;
interestRate = dblTrmLoanRate [intYears][1];
//dblInterestRate=interestRate;
intRate = (interestRate / 100) / 12; // Calculates Interst Rate
double intYearsMonths = dblTrmLoanRate [intYears] [0]; // Calculates Loan Term in Months
int months = (int)intYearsMonths * 12; // Devides by months
double interestRateMonthly = (intRate / 12); // Devides Rate
double payment = dblLoanAmount * intRate / (1 - (Math.pow(1/(1 + intRate), months))); // Calculates monthly payment
double dblRmnLoan = dblLoanAmount; //Left over balance
double txtPaymentInterest = 0; // Payment
double txtPaymentPrincipal = 0; // Payment of principal
NumberFormat currency = NumberFormat.getCurrencyInstance(Locale.US); // Curreny format
txtPayment.setText(currency.format(payment));
boxSpace.setText("Month\tPrincipal\tInterest\tBalance Left\n");
for (;months > 0 ; months -- )
txtPaymentInterest = (dblRmnLoan * intRate);
txtPaymentPrincipal = (payment - txtPaymentInterest); // Calculates monthly payment
dblRmnLoan = (dblRmnLoan - txtPaymentPrincipal);
boxSpace.setCaret (new DefaultCaret()); // Scroll position
boxSpace.append(String.valueOf(months) + "\t" + // Table data
currency.format(txtPaymentPrincipal) + "\t" +
currency.format(txtPaymentInterest) + "\t" +
currency.format(dblRmnLoan) + "\n");
if(command == reset)
Clears fields
txtYearsInput.setText(null);
txtInterestRate.setText(null);
txtYears.setText(null);
txtPayment.setText(null);
boxSpace.setText(null);
public static void main(String[] args) //This is the signature of the entry point of all the desktop apps
new MPC();
}This portion to be exact. All the buttons work for me except this one. I need to calculate user input and also use the fixed data that can be found in the dblTrmLoanRate array. When I choos to use user input instead, the program either crashes or for some reason uses the year7InterestRateBtn instead.
if (command == btnCalc)
//dblLoanAmount = Double.parseDouble(txtTotalMort.getText() ); // Loan amount
//interestRate = Double.parseDouble(txtInterestRate.getText() ); // /100 )/ 12; // Devides rate
intRate = (Double.parseDouble(txtInterestRate.getText() )/100 )/ 12;
//int intYearsMonths = Integer.parseInt(txtYearsInput.getText() );// * 12; //Multiplies loan length
int months = Integer.parseInt(txtYearsInput.getText() )* 12;
I was going to leave out the remed portion but thought it might help you with the navigation. I am sorry I did not use code tags, but I am going to go find out what those are and use them in the future. -
Help with Spry Menu - stopped working
Dear Forum,
I used a Spry Horizonatal Bar menu successfully in a site I
am building. After I modified it to suit my needs it was working
fine (changed colors, font, variable width box, modified hacks for
IE6) until I did some code cleaning to achieve WC3 validation. I
had to change many things in the code, but as far as I am aware
nothing was even remotely tied to the menu. After several passages
I realized with horror that the menu (still there) are not working
anymore. The pull down does not work. I attach the link of the test
site here:
site
Is anyone able to tell me what's not ok in it. I must point
out that senpai.js do not exists; should i remove that lin of code
(I am wondering if it does create a conflict - I removed it but to
no effect, then decided to put it back so I can show you the site
as it is).
I would appreciate any help, I am not expert, this is my
first site and I am sure I am doing something silly; if I just knew
what it is! I am getting mad trying to progress with this. Now I
have valid code, with a menu not working! Not too good as you can
see.
Help, ideas anyone?
Thanks in advance!
Asyavar: Brilliant!
I'm on Windows 7 64bit and this Pages panel stuff was driving me nuts: thumbnails at the far right, snapping shut panel when attempting to resize, no scroll bar, blank panel, everything poopy. I tried all the standard deviations: uninstall/reinstall, new workspace, Ctrl+Shift+Alt on startup, delete files manually, and only ocassionally did the Pages panel work as expected, then it would almost immediately revert to bad stuff.
Your solution worked like a charm, and I thank you from the bottom of my heart...<G> -
Anything new with keyboard issues in XP
read alot of posts but doesnt appaer to be anything new on keyboard issues in XP. works for awhile then nothing.mouse does work. i dont have an old keyboard around i can use. was hoping it was something to do with XP settings.
any word ?I seemed to have the same issues other people were reporting: USB keyboard would disconnect every five minutes or so, would sometimes re-connect by itself, would other times freeze and require re-plugging. The mouse would usually keep working even when plugged into keyboard. This would happen on all USB ports. It was most noticeable in Windows (through Boot Camp and through Parallels), but it would also happen less noticeably in OS X. In OS X, it would often recover without re-plugging, but errors would show up in the Console logs. It seemed to get worse the longer my computer was on.
Turned out, for me at least, to be a faulty keyboard. Although I tested the keyboard on another computer and it was fine, on the Intel iMac it had the disconnection problem. I repaired permissions, verified the disk, reset PRAM, restarted in Safe Boot, but nothing helped.
I called Apple about it. They replaced the keyboard under warranty, and since then (about two weeks) the problem has not occured once, in OS X or in Windows.
If you haven't done so already, I recommend thorough troubleshooting. Disconnect all other peripherals other than the mouse and monitor your logs in OS X (open Console under Utilities) to see if USB errors come up. Boot into in Safe Boot mode by pressing Shift on start-up. If the error still comes up in OS X, as it did in my case, then you have a valid problem you can call Apple about. If it happens only in Windows, unfortunately it might be harder to make a case since Boot Camp is beta software. When you call Apple you can desscribe all the testing you already did.
(are you still under warranty?)
20" iMac Core Duo Mac OS X (10.4.6) -
Need help with Workflow Issue: One notification sending out non-stop email.
Hi,
We've created a custom PO Approval Workflow based on standard PO Approval Workflow and we've had this for a while now. Last week, we encountered an issue where the notification keeps on sending email to the Suppliers and Buyers. We found out that the particular notification_id in the WF_NOTIFICATIONS table keeps getting updated by the minute setting the MAIL_STATUS to INVALID then back to SENT then back to INVALID again and so on. We think that whatever is updating this table is the cause but up until now we haven't found what's updating it. Below are some information of our instance.
Oracle Applications: 11.5.10.2
Database: 10.2.0.4 64 bit
OS: AIX
Custom Workflow based on revision 115.127.11510.16
Customizations:
- Created custom notification XX_EMAIL_PO_PDF_SUPP based on EMAIL_PO_PDF_SUPP.
- Created custom message XX_EMAIL_PO_PDF based on EMAIL_PO_PDF.
- Added #WFM_CC to XX_EMAIL_PO_PDF.
- Created custom attribute XX_PO_WF_EMAIL_PERFORMER and set as Performer to notification XX_EMAIL_PO_PDF_SUPP.
- Created custom function XX_ADDTL_STARTUP_VAL right after function "Set Workflow Startup Values". This function sets #WFM_CC attribute and XX_PO_WF_EMAIL_PERFORMER attribute.
Not sure if the customizations have anything to do with the issue since not all POs have this issue. Have anyone experience this? Would really appreciate any help with this.
Thanks,
AllenKashif M wrote:
Just review this thread, may help you
Workflow Notification Mailer is Spamming the Email Accounts of Users [ID 1293792.1]
thanksHi,
This note has solved our issue. Hopefully they will release a fix for this as it is a common thing for us to change the email address of Supplier Site.
Thanks,
Allen -
How ca i get help with IOS8 issues.
Downloaded ios8 on my trusty I Pad 2, 64G, and now it's a mess. I know this is happening to a multitude of people. My favorite app stopped functioning, Facebook is super slow and crashes, internet is slow, Words with Friends is slow and crashes, the screen shifts and it's hard to scroll. Typing is slow. It's even difficult to close programs. Apple is by all reports aware but in denial. What's the chances of a fix for this? Especially on the older products. I've read that IPad 2 can support the upgrade, but performance is horrendous. If i have to scrap my old, used-to-be trusty I Pad, it won't be for another Apple product Just on principle. How can I join a group that will make them sit up and take notice?
I updated my iPad 2 64GB And have had no issues. Its dare I say it faster than iOS 7 was. Everything works except one Game which also does not work on my iPhone, thus I take that to mean its an issue with the game rather than the update. Does that automatically mean the update is flawless? That the installation can go down with out a hitch in all scenarios? Of course not.
Millions of people have updated, a small minority is having issues this is always the case with Os updates on any platform. Nothing in this world is perfect.
There will always be bugs and glitches that cannot be anticipated. The fact it works fine on the majority of the devices that have been updated, and only a small percentage is having issues means its a situational based on hardware or other specific cause with the devices havingthe issues, rather than some inherent flaw with the update. In which case there is nothing Apple can really fix on their update. Also of note is that issues are varied, from slowness to crashing, to
Apps simply not working. Its unlikely the update package itself would cause all these different issues in one device, but at the same time cause nothing on an identical device. So you see, its not so simple to identify the issue if in fact there is one that can actually be fixed.
To me it sounds like the installation process experienced an issue at the time it was being executed locally on the device which means again we are back to some internal cause with the specific device which can be different between devices. -
Help with backup issues on ITunes IPhone
I recently updated to iOS7 however before this i did the following:
1. i used a new ITunes on my laptop so i plugged my phone in a made 4 backup copies before restoring my IPhone
2. I restored my IPhone fine and updated to iOS7 in the process once restored
3. I went through the steps on setting up iOS7 and got the the 'Restore from backup section' - I selected restore from backup and it started retoring from my last backup with all my apps/Contacts etc, It said it would take 16 minutes to fully sync it all back
4. However during this process my laptop decided to restart therefor stopping the backup sync
5. I reopen my Itunes and my IPhone is available on my ITunes, i select 'Restore from backup' but it only shows a backup from 23:45 which is the time staright after my laptop restarted
6. It doesnt show any backups previousl to this in my ITunes backups folders for some reason - I have lost everything from my Phone and i cant seem to see the previous backups - They MUST be somewhere as i backed up 4 times prior to this but only 3 backups are being displayed all labelled as 23:45, 23:45 and 23:46..
7. Im not sure what happened to all my data and information and where its gone to
CAN ANYONE HELP WITH THIS?Yes--thank you! For some reason, it wasn't configured properly. Looks like problem is solved.
Maybe you are looking for
-
Hi, When I run a report with only the below attribute and measure, I get the below error. All the others attributes and measures are working fine, except for Stay and Nights. I think it is a mapping issue in the repository, but could not find so far
-
Hello, Can someone help me to activate the Call Forwarding option on IPhone 5, OS 6.01 ?? Currently I am trying: * Settings -> Phone -> Call Forwarding -> "ON" -> SET THE PHONE NUMBER ->"Call Forwarding button" But when the screen returns to Call for
-
EHS - List: weight of product's substances
Hello, I'm completely new to EH&S module. My company has to produce for every shipped product and/or packaging, a weight list of substances it's composed from. Example product X is composed of: category metals: Iron x kg, cadmium y kg, ... category p
-
Add JavaScript to boxes and buttons
This question was posted in response to the following article: http://help.adobe.com/en_US/captivate/cp/using/WS5b3ccc516d4fbf351e63e3d119e9581edd-7feb.h tml
-
Here is my issue. I have a main.swf and I load an external music player.swf. I need to stop the sound from the player.swf when I push a button on the main.swf. Not all buttons just some buttons. I now I will need to put the code in each button. Thank