Help with kt4a ultra

when i installed fuzzy logic 4 and pc alert 4, there was an error because it said that there was no hardware monitor, what can i do?

Quote
Originally posted by Snorter
You cant run fuzzy logic and pc alert at the same time. One or the other.
i`m not running the two programs at the same time, i cant run any one, when i open fuzzy logic or pc alert after installing them there appears a window that says: no hardware monitor, and the program isn`t launched. Can you help me?

Similar Messages

Help with kt3 ultra

I just brought a KT3 ultra today. And I got a black screen(the mouse didn't show up) is after logon screen (the bar the moving under the windows)
here is what I use
KT3 ultra
PC2100 512 ddr-ram
evga gforce 2 MMX-400 64MB
T-bird 1400mhz
IBM 60GB harddisk
40x cd-rom
I had try to install the new bios for motherboard, format my harddirve and reinstall the windows xp... and I still can't get into windows.... I can only get into safe mode with network connectation.
I also disable the raid from the motherboard
and disable all the service in the msconfig.... but it still doesn't work... can anyone help.... plz...

yeah I disable the aspi already....
and i didn't overclock it...
I can boot up with the windows sometimes... (by keeps trying to reboot.... ) but the graphs is not right...
like the icon on the start button... it will change longer if I click on it
also.... when I am open the system in control pannel, it tells me that I am using 2.xx mhz and 3xx mb ram...
I am going to buy a new cpu and graphs card now to see is that work...

Help with 645 Ultra-C

ok i decided to update my system so i got the 645 ultra-c with a P4 2.2. i hooked everything up and its been working ok but i get the error stating (XXXXX) referenced memory at (XXXXXX) could not be read. now i get that error whenever i play games. i have the geforce 4 mx 420 and all the updated drivers for it. i never had any problems with it before so i dont think its the graphics card. the only other new item i added to my system was a stick of ddr 256 pc 2100 ram that i got cheap of the net. so im thinking i got bad memory because ive flashed my bios updating everything and thats the only solution i have left. any ideas???
thanks

ok ran the test for about 2 hours had like 5000 errors so im assuming i got bad memory thanks for the help. tip for others dont buy cheap ram off the net lol.

Help with KT4 Ultra and 5.1 surround

Hi there
Ok I am new to this PC building game and have to be honest I don't know all the technical jargon so if anyone can help, please speak in good old common English, I is a bit slow on the uptake.
The problem:
I have built a PC for the old man using the KT4 Ultra MS-6590 motherboard. It came with a two additional brackets, a blue tooth USB thingy, a 5.1 bracket and MSIDVD5.1ch DVD. Both brackets take up a PCI space but plug direct into the motherboard not the pci slot (you probably already know this).
Now i haven't installed these as I was unsure how to use them. The 5.1 adapter/bracket only has a two speaker jacks, and these run two types of speakers (which ones I can't remember right now). So if I was to pug it in, where do all the other speakers plug in to the system and am I supposed to buy a set of 5.1 speakers that are especially designed to use this type of jack configuration? Any recommendations on speaker packages are very welcome. I also take it that the DVD that came with it will help me set everything up yeh? I haven't tried it as I didn't install the bracket.
Ok next up, this Bluetooth bracket thing? So what's that all about? If I plug it in, will it give me bluetooth support or do I need to buy something else to make that work? Personally I would be surprised if I plugged it in and it worked.
Now if you are wondering what brackets I am talking about, you can see them here on the MSI site under the Socket A motherboard section, there are images right at the bottom.
Cheers for any help you can give, like I say, I am new to all this and I guess we all have to learn somewhere right? So please go easy on me.
Cheers Jordy

Cheers for that,
I read the KT4 unofficial Fact and got a little confused with what it was saying about bluetooth. I take it that it is in fact not bluetooth and just two extra USB ports? I could be wrong, like I say I get confused with all this techno babble.
Ok so when I installed the drivers and everything else for the motherboard, was c-media mixer installed with it, or is it on the MSIDVD5.1ch DVD?
That seem's easy enough to follow though cheers.
do you recommend any particualar speaker systems to make connection simple and easy? If you think I am dim, you should see the old man navigate the net (crap he is bound to read this).
Cheers for your help and anymore light you can shed on the bluetooth bracket.
Cheers again Jordy 8)

Help with 746F Ultra

i have a problem with the settings in the bios?
fsb=100 x 11 giving me 1100Mhz but i am running a athlon xp2500+ so it should be 166*11.
I have updated the bios but it remains the same what am i doing wrong?
256Mb 2700,
60Gb ibm deskstar HD,
msi 52x cdrom,
msi 52x24x52 cdrw,
400w psu
gf3 ti200 64Mb.

needed to change the fsb lol

Help with kt4 ultra ms-6590

Please , i have an AGP card nvidia based chipset , mx440 ge force 4 , with agp 8x avaible .
But in my bios setup , the option for agp 8x seens not be avaible ...
What may io do to activate the agp 8x .. or i really just using without know it ???
PLease help

Yes , already exist a mx440 that suport agp 8 x.. here is it , but u can check it in http://www.palit.com.tw ...
So , I don´t understand that 8x option don´t appears in my setup ....... : (
SPECIFICATIONS GeForce MX 440 with AGP 8X
Graphics Core 256-bit
Memory Interface 128-bit DDR
Memory Bandwidth (GB/sec.) 8.0
Fill Rate (Texels/sec.) 1.1 billion
Triangles/sec. 34 million
Effective Memory Clock Rate (MHz) 512
RAMDACs (MHz) (2 RAMDACs each) 350
Functions:
(1) Most Integrated AGP 8X GPU
(2) NViewTM Display Technology
(3) Lightspeed Memory ArchitectureTM (LMA) II Technology
(4) Accuview Antialiasing Technology
(5) Integrated Hardware Transform and Lighting Engine
(6) Nvidia Shading Rasterizer (NSR)
(7) High Performance 256-bit 2D Rendering Engine
Palit Mircrosystems Inc has selected Nvidia GeForce4 MX440 with AGP 8X graphics processing unit (GPU) for our new line of AGP 8X-compatible VGA cards. We believe Nvidia has once again demonstrated their graphics expertise by providing the best implementation of AGP 8X that we have seen. The Nvidia GeForce4 MX 440 with AGP 8X GPU offers excellent performance and unmatched stability on the new AGP bus technology

Please help KT4A Ultra/sound problems

My specs:
KT4A Ultra
AMD XP 2600 333FSB AXDA2600KV3D
Crucial 512MB 64MX64 DDR PC2700
MSI NVIDIA GEFORCE4 Ti4800 8X
Creative Sound Blaster Audigy Gamer 5.1
Linksys Network everywhere fast ethernet 10/100 network card
Xcase PSU Max DC output +3.3v 30A,+5v 35A,+12v 21A,-12v 1.0A,-5v 0.5A,+5sb 2.0A, 500W max
Maxtor Fireball 541DX 20GB 5400 RPM ATA/100 HD
SONY 3.5 Floppy drive
Opto Media 48-12-48 CD-RW DM-828 Master
Samsung sc-140 cd-rom slave
Windows ME
DirectX 9.0b
Temps CPU 41C,System 38C
Ok this is my problem With my sound turned on and the sound Acceleration turned on at all I get massive Video lag while playing open GL games.once I turn the sound off or turn the Acceleration off (turned off I get echoy stagered sound)the problem stops.
Things I have tried to fix it.
To start I was using the onboard sound with the latest drive.Thinking this might be the problem I turned off onboard sound. I bought a Typhoon 5.1 card same problems.So I bought a soundblaster live 5.1 card downloaded lastest drive same problems. just bought a soundblaster Audigy Gamer same problems. I tested my friends 2 year old soundblaster live 5.1 Gamer card and it seems to work just fine.
I have read both the KT4 Unofficial FAQ and the trouble shooting guide nothing in the two worked. I installed the lastest Via 4 in 1,video drivers and the lastest windows updates. I have tried moving all my pci cards in to each slot.I even went into my BIOS and swaped the IRQs for the PCI slots around.Only thing I have not tried is a bucket of water and a 20 pound Sldge. I have posted at 3 o4 other places no one can seem to find the problem PLEASE HELP I think I might be losing my mind.

fdisk formated and reinstaled windows 3 times. fresh install each time i installed a sound card. so I dont think lingering drivers is the problem which also means dx9 has been installed fresh each time.also I have been dealing with this for nearly a month and I am at a loss.

Help me please whit a KT4A Ultra!! Thanks

?(
Hello friends, how are you?
I have a problem whit my mother board.
I bought a MSI KT4A Ultra the last week, and I bought a AMD Athlon XP 2200+ (1.8Ghz aprox)too for this mobo.
When I turn on the computer and pass the post, the post say that I have a AMD Athlon xp 1500+ (1.35Ghz aprox.), and I don't now why the post say this if I put on the mobo a Athlon xp 2200+. Plese help me to correct this problem.
Thanks.

Thanks edyros
This was the problem, I didn't change the FSB from the bios, for this the post say tha I have 1500+, but I Changed the FSB to 133 Mhz and now the post say exactly 2200+, thanks friend!!! the problem was to resolve, and the mother board work very well.
Thanks friend for the solution.
Good bye.
NOTE: Escuse me my english because I speach spanish, but I hope that you undestand me.

Can I use DDR Hyper X with Kt4 ultra or Kt4a?

Hi there, Has anyone used Kingston DDR 400 HYPER X (pc 3200)(2 or 3 X 512 Mb) memory with KT4 ultra fisr or KT4A?
Can I use 2 or 3 sitcks of 512 Mb without problems???
Does this really worth the effort?
I´m moving from 333 to 400
will it work????
?( ?( ?( ?( ?(

I´ve checked for some nforce mobos...but why do they have
3 sockets for ddr memory???, if I´m only going to use 2 of them why do they bring 3....????
Is better the performance with 1 GB (2 X 512) than with 1.5 Gb (3 X 512)????????????? ?( ?( ?( ?( ?( ?(
Isn´t better to have 1.5 Gb than 1 Gb of memory...and if so, why????
Does this thing has relation with twin bank architechture????
Quote
Originally posted by mvbozkurt
Yes you can but there is a small problem that you cant use 3 of those guys, only two. Why dont you just buy a nForce board and enjoy your Kingston mems as they meant to be run (:D Nvidia isnt it)....(is what I am thinking of course)

KT4A ULTRA 6590 DVD and Floppy issues

I'm stumped and frustrated...please be kind! I've upgraded my KT4A ULTRA 6590 Ver 1. with AMD Athon XP Barton 2500 for my kids computer. Everything works great except I cannot see files on either my DVD or 3.5" floppy...unless there is a disk in the drive when I boot. Oddly, I can burn CDs but cannot see the result until I load the CD on my other PC. Through several suggestions from reading the forum, I did go to Safe Mode and sure enough the floppy and DVD work fine. I also tried another known good CD RW and it also exhibited this same behavior.
The BIOS version when I start up is v3.0 (see below), but things appear to be pointing to drivers and/or BIOS. Did update/install the nVidia driver for the video card and also updated to VIA 4 in 1 ver 4.55. Have made several unsuccessful attempts to use the Live Update 3...it basically does not do anything, or it must be incredibly slow when it goes to the MSI website.
In various other attempts to find the correct BIOS for MSI KT4A ULTRA 6590 vER.1, I visited the MSI iste "BIOS Search" and discovered that it has a version 1.4 (4/29/2003) and v3.0 (5/29/2003)...this looks fishy to me. On yet another MSI Mainboard BIOS detail it says use Ver 3.0, but in the very next line says "This BIOS cannot be used on KT4 Ultra (MS-6590)".
I was further consfused when attempting to determine which BIOS was installed. "MSI Info View" program BIOS tab says that "AMI BIOS version is 07.00T", While the MSI Fuzzy Logic program on the MSI info page says the "Chipset : Via KT600". Neither of these appear to be correct.
At this point I ready to throw this thing away and buy another board.
jw
-MSI KT4A ULTRA 6590 vER.1
-AMI rev 3.0??
-AMD Athlon XP 2500 Barton
- 512MB
-NVidia GeForce2 400 MX
-Power Supply 500W+
-40GB (IDE1 Master) WEstern Digital 10GB WD (IDE1 Slave)
-DVD RW NEC 3520 A
-Windows XP Service Pack 2

Cleared the CMOS and made the advanced chipset configuration changes...but no improvement. I did also confirm that during boot, the drives are recognized properly.
Not an expert, but since it operates normally in Safe Mode I'm still suspicious of the IDE, graphics drivers, and/or conflicts. When I look at the device manager in XP, the graphics drivers is new as expected, yet the IDE are standard XP. Since I updated to the 4-in-1 version 4.55, I would have expected some change to the IDE driver dates, but it appears is using the standard Windows drivers...but not sure.
HERE is some more data from the 'System Information...Conflicts/Sharing' that may make sense to you (not me):
I/O Port 0x00000000-0x00000CF7   PCI bus
I/O Port 0x00000000-0x00000CF7   Direct memory access controller
I/O Port 0x000003C0-0x000003DF   VIA CPU to AGP2.0/AGP3.0 Controller
I/O Port 0x000003C0-0x000003DF   NVIDIA GeForce2 MX/MX 400
IRQ 5   VIA Rev 5 or later USB Universal Host Controller
IRQ 5   VIA USB Enhanced Host Controller
IRQ 10   NETGEAR WG311v2 802.11g Wireless PCI Adapter
IRQ 10   VIA Rev 5 or later USB Universal Host Controller
IRQ 11   NVIDIA GeForce2 MX/MX 400
IRQ 11   CMI8738/C3DX PCI Audio Device
IRQ 11   VIA Rev 5 or later USB Universal Host Controller
Memory Address 0xA0000-0xBFFFF   PCI bus
Memory Address 0xA0000-0xBFFFF   VIA CPU to AGP2.0/AGP3.0 Controller
Memory Address 0xA0000-0xBFFFF   NVIDIA GeForce2 MX/MX 400
I/O Port 0x000003B0-0x000003BB   VIA CPU to AGP2.0/AGP3.0 Controller
I/O Port 0x000003B0-0x000003BB   NVIDIA GeForce2 MX/MX 400
Here the 'System Information' data:
IDE Info
Name   VIA Bus Master IDE Controller
Manufacturer   VIA Technologies, Inc.
Status   OK
PNP Device ID   PCI\VEN_1106&DEV_0571&SUBSYS_05711106&REV_06\3&61AAA01&0&89
I/O Port   0x0000FC00-0x0000FC0F
Driver   c:\windows\system32\drivers\viaide.sys (1.00.01.01, 5.25 KB (5,376 bytes), 8/18/2001 5:00 AM)
Name   Primary IDE Channel
Manufacturer   (Standard IDE ATA/ATAPI controllers)
Status   OK
PNP Device ID   PCIIDE\IDECHANNEL\4&127A70AC&0&0
I/O Port   0x000001F0-0x000001F7
I/O Port   0x000003F6-0x000003F6
IRQ Channel   IRQ 14
Driver   c:\windows\system32\drivers\atapi.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 93.13 KB (95,360 bytes), 8/18/2001 5:00 AM)
Name   Secondary IDE Channel
Manufacturer   (Standard IDE ATA/ATAPI controllers)
Status   OK
PNP Device ID   PCIIDE\IDECHANNEL\4&127A70AC&0&1
I/O Port   0x00000170-0x00000177
I/O Port   0x00000376-0x00000376
IRQ Channel   IRQ 15
Driver   c:\windows\system32\drivers\atapi.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 93.13 KB (95,360 bytes), 8/18/2001 5:00 AM)
CD-ROM
Drive   E:
Description   CD-ROM Drive
Media Loaded   No
Media Type   CD-ROM
Name   _NEC DVD_RW ND-3520A
Manufacturer   (Standard CD-ROM drives)
Status   OK
Transfer Rate   Not Available
SCSI Target ID   0
PNP Device ID   IDE\CDROM_NEC_DVD_RW_ND-3520A____________________1.04____\5&2DFCC752&0&0.0.0
Driver   c:\windows\system32\drivers\cdrom.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 48.38 KB (49,536 bytes), 8/18/2001 5:00 AM)
IF ANY OTHER INFO WOULD HELP, PLEASE LET ME KNOW...ANY HELP/ADVICE IS APPRECIATED...THANKS VERY MUCH!!

Help with XP2400, low scores and OCing...

This is my first post on this forum, just to let everyone know right off the bat you are dealing with a nOOb!! I have a little knowledge on the subject from all the reading I've done the last week or two, but still am new to this...Ok, that being said, here we go...
AMD Athlon [email protected](15x150)(49 idle, 55 under load)
MSI KM2M combo MS-6738
768MB pc2700(set:BY SPD, 6,3,3,2.5)
BFG Gforce FX5900XT 475/794
SoundBlaster Live 5.1
40G HD / Win XP Home
stock PSU 250 watt (yea,yea, more power, I know)
Ok, I just upgraded my vid. card to play BFV because my old Gforce4 mx440se just wasn't cutting it anymore....When I upgraded I started to run some benchmarks(N Bench, SiSiftwareSandra2004, Aquamark3...).....After running AM3 I noticed that my cpu score was much slower than many of the others(cpu 4989 gfx 6099 overall 37,774)...I mean slower than 1.6 G machines, which I found to be quite disturbing! My graphics score holds up nicely compared to others (the FX5900XT OC's like a champ!)...I have all the latest chipset drivers, vid card drivers, sound card drivers etc....My cpu is overclocked using fsb only because my mobo won't allow access to multipliers and voltage controls. After unlocking the 2400, it set to 933Mhz(7x133) to show it was working, but no added options are found...Ater locking it, I realize I need a new motherboard(micro-atx) that will support my pc2700 and a 400 fsb....I don't know if an Nforce 2 will work because they are very selective about the memory they accept...Any suggestions?
I just basically wanted to know why my cpu tests so low in AM3, but not on Sandra2004 with her MIPS and MFLOPS.....It tests well above theXP2400,XP3000, and just better than theXP3200!!! If I use AIDA32, my cpu tests really low as well...What the hell is going on here? I want to know why 1.6 G machines are beating mine? is it possible my cpu just doesn't like certain benches? Why does it test well in 1 test and bad in another? My cpu score should be almost 2000 points higher in the AM3 bench than it is...Right? What am I doing wrong?
Thanks for taking the time to read my long, run on post....I wrote it on my way out the door just before work...If any more info is needed, please let me know...
Thanks in advance for any replies..Like I said, I'm new to this and any help would be greatly appreciated..Thanks again!
TY,
Silly

Quote
Originally posted by scooter787b
Quote
Originally posted by goodcooper
Quote
Originally posted by scooter787b
hate to put u down again slider, but remember your ram may not work with the nforce2 chipset, but theirs a very slim chance u may get lucky
i've never had a compatibility issue with nForce2 board, EVER
ur kidding right? ive been at these forums almost as long as the nforce2 chipset has been out, and many ram modules will not work with the nforce2 chipsets, now the k7n2 series is a bit more pickier then other manufacturers, but come on dude, check these out:
https://forum-en.msi.com/index.php?threadid=14555&sid=
ever notice why when someone says their comp wont boot and we ask for the ram type?
some of my ram is ON that LIST, early revisions DID have problems with RAM, i have never had problems with the ultra and turbo revisions

KT4 Ultra or KT4A Ultra ???

:D My new KT4 Ultra just arrived today! Before installing it I browsed the site and joined the forum to check for updates and gotchas.
?( How do I identify KT4 Ultra vs KT4A Ultra? Can I tell by the Serial Number or is there a particular PCB Rev or chip on the Motherboard?
TIA for constructive feedback.
John
Concord, CA, USA
New System Specs:
Case: Antec Plus 1080AMG with 420W Smart PS, 5 Fans
OS: Existing XP Home SP1
CPU: New Thoroughbred 2100+ Retail w/Fan
RAM: Kingston PC2700 DDR 512 x 1
Optical: LG DVD/CDRW Combo GCC-4320B 32x10x40x16
HD0: WDC WD400BB 40GB EIDE
HD1: Maxtor 91303 13GB EIDE
Existing Display: MadDog nVidia MX-440 64MB AGP
Plus other peripherals & apps

:O DUH!!! Thanks! I hadn\\\'t removed the Mboard from the bag yet (embarrassed grin...)
Perhaps another dumb question -- despite years of tech experience this is my first MSI board: if my 6590 did not come with optional brackets, can I order them? If so, where? My 5 speaker system needs the optional S bracket. I\\\'m also interested in the optional D and Firewire brackets. Couldn\\\'t find a link on the Taiwan or US MSI web sites.
Thanks a million for your quick reply. My KT4 Ultra arrived in record time. FedEx delivered it two days early, just three days after I ordered it from NewEgg.com here in California -- including two weekend days. Next, YOU replied to my question in minutes!
This is a good omen about MSI and my new Mboard. Thanks again!!!
John
Concord, CA, USA

KT4A ULTRA semprom suport

hi, i want to know if I can upgrade my kt4a ultra with a sempron processor
(sorry, I have a poor english)

dealerarg,
Quote
Barton (0.13u) 200/400MHz FSB 512KB L2 Cache
AthlonXP 3000+ 200 Auto NO
AthlonXP 3200+ 200 Auto NO
AMD Sempron CPU
Thoroughbred (0.13u) 166/333MHz FSB
Sempron 2200+ 166 Auto NO
Sempron 2300+ 166 Auto NO
Sempron 2400+ 166 Auto NO
Sempron 2500+ 166 Auto NO
Sempron 2600+ 166 Auto NO
Sempron 2800+ 166 Auto NO
Thorton (0.13u) 166/333MHz FSB 256KB L2 Cache
Sempron 2200+ 166 Auto NO
Sempron 2800+ 166 Auto NO
Get the details here:
KT4A Ultra CPU Support Status
Take Care,
Richard

KT4A Ultra and New Duron

KT4A Ultra supports new duron?
MSI would make a bios update with new duron´s support.

yes ..fully soport

Help with if statement in cursor and for loop to get output

I have the following cursor and and want to use if else statement to get the output. The cursor is working fine. What i need help with is how to use and if else statement to only get the folderrsn that have not been updated in the last 30 days. If you look at the talbe below my select statement is showing folderrs 291631 was updated only 4 days ago and folderrsn 322160 was also updated 4 days ago.
I do not want these two to appear in my result set. So i need to use if else so that my result only shows all folderrsn that havenot been updated in the last 30 days.
Here is my cursor:
/*Cursor for Email procedure. It is working Shows userid and the string
You need to update these folders*/
DECLARE
a_user varchar2(200) := null;
v_assigneduser varchar2(20);
v_folderrsn varchar2(200);
v_emailaddress varchar2(60);
v_subject varchar2(200);
Cursor c IS
SELECT assigneduser, vu.emailaddress, f.folderrsn, trunc(f.indate) AS "IN DATE",
MAX (trunc(fpa.attemptdate)) AS "LAST UPDATE",
trunc(sysdate) - MAX (trunc(fpa.attemptdate)) AS "DAYS PAST"
--MAX (TRUNC (fpa.attemptdate)) - TRUNC (f.indate) AS "NUMBER OF DAYS"
FROM folder f, folderprocess fp, validuser vu, folderprocessattempt fpa
WHERE f.foldertype = 'HJ'
AND f.statuscode NOT IN (20, 40)
AND f.folderrsn = fp.folderrsn
AND fp.processrsn = fpa.processrsn
AND vu.userid = fp.assigneduser
AND vu.statuscode = 1
GROUP BY assigneduser, vu.emailaddress, f.folderrsn, f.indate
ORDER BY fp.assigneduser;
BEGIN
FOR c1 IN c LOOP
IF (c1.assigneduser = v_assigneduser) THEN
dbms_output.put_line(' ' || c1.folderrsn);
else
dbms_output.put(c1.assigneduser ||': ' || 'Overdue Folders:You need to update these folders: Folderrsn: '||c1.folderrsn);
END IF;
a_user := c1.assigneduser;
v_assigneduser := c1.assigneduser;
v_folderrsn := c1.folderrsn;
v_emailaddress := c1.emailaddress;
v_subject := 'Subject: Project for';
END LOOP;
END;
The reason I have included the folowing table is that I want you to see the output from the select statement. that way you can help me do the if statement in the above cursor so that the result will look like this:
emailaddress
Subject: 'Project for ' || V_email || 'not updated in the last 30 days'
v_folderrsn
v_folderrsn
etc
[email protected]......
Subject: 'Project for: ' Jim...'not updated in the last 30 days'
284087
292709
[email protected].....
Subject: 'Project for: ' Kim...'not updated in the last 30 days'
185083
190121
190132
190133
190159
190237
284109
286647
294631
322922
[email protected]....
Subject: 'Project for: Joe...'not updated in the last 30 days'
183332
183336
[email protected]......
Subject: 'Project for: Sam...'not updated in the last 30 days'
183876
183877
183879
183880
183881
183882
183883
183884
183886
183887
183888
This table is to shwo you the select statement output. I want to eliminnate the two days that that are less than 30 days since the last update in the last column.
Assigneduser....Email.........Folderrsn...........indate.............maxattemptdate...days past since last update
JIM.........      jim@ aol.com.... 284087.............     9/28/2006.......10/5/2006...........690
JIM.........      jim@ aol.com.... 292709.............     3/20/2007.......3/28/2007............516
KIM.........      kim@ aol.com.... 185083.............     8/31/2004.......2/9/2006.............     928
KIM...........kim@ aol.com.... 190121.............     2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190132.............     2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190133.............     2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190159.............     2/13/2006.......2/14/2006............923
KIM...........kim@ aol.com.... 190237.............     2/23/2006.......2/23/2006............914
KIM...........kim@ aol.com.... 284109.............     9/28/2006.......9/28/2006............697
KIM...........kim@ aol.com.... 286647.............     11/7/2006.......12/5/2006............629
KIM...........kim@ aol.com.... 294631.............     4/2/2007.........3/4/2008.............174
KIM...........kim@ aol.com.... 322922.............     7/29/2008.......7/29/2008............27
JOE...........joe@ aol.com.... 183332.............     1/28/2004.......4/23/2004............1585
JOE...........joe@ aol.com.... 183336.............     1/28/2004.......3/9/2004.............1630
SAM...........sam@ aol.com....183876.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183877.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183879.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183880.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183881.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183882.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183883.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183884.............3/5/2004.........3/8/2004............     1631
SAM...........sam@ aol.com....183886.............3/5/2004.........3/8/2004............     1631
SAM...........sam@ aol.com....183887.............3/5/2004.........3/8/2004............     1631
SAM...........sam@ aol.com....183888.............3/5/2004.........3/8/2004............     1631
PAT...........pat@ aol.com.....291630.............2/23/2007.......7/8/2008............     48
PAT...........pat@ aol.com.....313990.............2/27/2008.......7/28/2008............28
NED...........ned@ aol.com.....190681.............4/4/2006........8/10/2006............746
NED...........ned@ aol.com......95467.............6/14/2006.......11/6/2006............658
NED...........ned@ aol.com......286688.............11/8/2006.......10/3/2007............327
NED...........ned@ aol.com.....291631.............2/23/2007.......8/21/2008............4
NED...........ned@ aol.com.....292111.............3/7/2007.........2/26/2008............181
NED...........ned@ aol.com.....292410.............3/15/2007.......7/22/2008............34
NED...........ned@ aol.com.....299410.............6/27/2007.......2/27/2008............180
NED...........ned@ aol.com.....303790.............9/19/2007.......9/19/2007............341
NED...........ned@ aol.com.....304268.............9/24/2007.......3/3/2008............     175
NED...........ned@ aol.com.....308228.............12/6/2007.......12/6/2007............263
NED...........ned@ aol.com.....316689.............3/19/2008.......3/19/2008............159
NED...........ned@ aol.com.....316789.............3/20/2008.......3/20/2008............158
NED...........ned@ aol.com.....317528.............3/25/2008.......3/25/2008............153
NED...........ned@ aol.com.....321476.............6/4/2008.........6/17/2008............69
NED...........ned@ aol.com.....322160.............7/3/2008.........8/21/2008............4
MOE...........moe@ aol.com.....184169.............4/5/2004.......12/5/2006............629
[email protected]/27/2004.......3/8/2004............1631
How do I incorporate a if else statement in the above cursor so the two days less than 30 days since last update are not returned. I do not want to send email if the project have been updated within the last 30 days.
Edited by: user4653174 on Aug 25, 2008 2:40 PM

analytical functions: http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/functions2a.htm#81409
CASE
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/02_funds.htm#36899
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/04_struc.htm#5997
Incorporating either of these into your query should assist you in returning the desired results.

Help with kt4a ultra

Similar Messages

Maybe you are looking for