Help with launchpad organization

I want to use the Launchpad to organize my applications while leaving the Applications folder untouched (a large flat list of stuff since experience taught me that trying to organize programs there in subfolders might lead to problems with some applications and their update procedures).
I ran the command to reset the launchpad to a blank state since it had 8 pages with doubles etc. :-)
I am now dragging applications I want there from the Applications folder (or subfolders) to the Launchpad icon on the dock. Two questions if I may:
a) is there a way to have a larger target when dropping the applications ? the icon on the dock is small for an old curmudgeon like me :-)
b) for some reason most applications I drop there end up on page TWO of the launchpad while others go on the first page. Is there a reason and can this be avoided ? FWIW the first page is still almost totally empty.
c) Is there a way to select multiple icons in the Launchpad and drag them all at once on another icon / page ?
Thank you very much

I can at least give you a work around for your third question. To move more than one icon to a different page you can 'lump' all the icons you want to move into a folder, then move the folder to the desired page, then remove the icons from the folder. To create a folder drag one icon on top of a second icon, wait, and a folder will be created. To remove icons from the folder, open the folder then drag the icon above the folder.
Hope this helps!

Similar Messages

  • Help with Launchpad Needed please.

    Please can some one tell how to stop getting all these updates in my Launchpad, I downloaded some code which got rid of the icons,(Happy) I started to organise them all,  then Microsoft update put 20 icons on it, and they cannot be trashed. Hate This! Its a waist of time using the code to delete if everytime there is an update on something or other, loads of icons appear. Why can I not have control over my own Mac!

    I think Ive worked out my own problem...
    After I attach the model to the parent with addChild, i then
    set its transform to transform(). ie.
    theChildModel.transform = transform()
    Which solves the problem of the child being offset from the
    parent.
    (below is a seperate problem, I'm using a sphere primitive,
    so theres no issue with possibly the sphere having an popsitional
    offset when i attach it as a child. My previous question was in
    relation to when I attach the actual head object, which did have an
    offset)
    But Now, I have a problem with the parent being positioned
    incorrectly when I try to use boneplayer to animate it.
    I tried to get down to basics, to work out where the position
    was first going wrong, and its when i add the bonesPlayer modifier.
    These are the simple steps I take...
    I copy the Torso model into the 3D world. (this has a bone
    structure and a dummy Model in the correct position for head,
    hands, feet)
    Then I create a sphere primitive.
    Then I add the sphere as a child of the Torso's child[1]
    dummy Model, which I know is the 'head's dummy Model.
    That works fine, the sphere is in the correct 'head'
    position.
    But then when I add the bonesPlayer modifier to the Torso
    Model, the sphere jumps to an incorrect position(about in the
    middle of the torso model).
    Anyone experienced something like this before? Should I be
    doing something first before I add the bonesPlayer modifier?
    I have a very trimmed down demo of what Im talking about, if
    anyone would like to see the code.
    Any help greatly appreciated.
    Glen

  • Help with Organizer (Ver 11) after hard drive failure

    I have Elements 11 and am an experienced user.  Problem is with the Organizer program.  Hard drive (Network attached drive) with 16,000+ images failed.  Actual Organizer catalog is stored on my regular computer C:\ drive.  ONLY the photos were stored on the external drive.  I replaced drive with a new drive (also external network attached).  When I run Organizer, all the thumbnails indicate the files are "offline."  When I run "reconnect files" from the menu bar, it tells me there are no missing files.  If I use the file info window (in Organizer) and click on "Location" it tells me the file location ON THE ORIGINAL DRIVE is offline.  If I go ahead and reconnect the file from that window, it does ok... BUT... when I go back to the Organizer and open that image full screen, it does NOT show the name tags of the subject when you mouse-over the displayed image. The "name" tags are still listed in the tag window, but no name on the screen.  It looks as if the catalog is somehow looking for that very specific old drive, and that the tag database can't connect to the image on the replacement drive.
    What happened to the database of all the people's names that are actually shown on-screen for each image??  The catalog on C:\ is intact and untouched by the external drive failure.  How can I get Organizer to recognize all the image files on the new hard drive?  I have screen shots of all the messages, etc., if that would help.
    Thanks.....  Earl

    First of all, did you backup your catalog/media files via the catalog manager ? In that case the answer is to do a restore to the new custom location.
    Since you are asking for help, I presume you have no backup available.
    Now, the explanation for the problem. Network drives are considered 'offline' just like CD or DVDs when there are not active. On the other hand, each of those removable storage media are identified in the catalog database with a unique internal identifier which has the letter drive, device serial number, name and type of device. I am not competent about network drives, but I am sure that pluging another network drive will show different properties. Your drive will be considered offline.
    Then, when you want to reconnect, the organizer does not consider the files are missing, it waits for you to plug in the original drive.
    What solution ?
    What could you do to enforce the Organizer to recognize the new drive as the old one ?
    Let's suppose your files had not been on a network drive, but on an external USB drive. Then all your files would have been seen as 'missing' because the recorded paths of your media files would have been different for thedrive identifier, and reconnecting could have been a solution.
    The main problem I see is that I am pretty sure that you can't tell the catalog manager how to change the identifier of the offline drive, and I can't see any easy workaround. If someone knows a way, I would be extremely interested! Would it be possible to fool the Organizer to identify the new network drive with the same parameters as the old one?
    So, what I would do in your case would be to use an external sqlite database manager to look at the catalog.pse11db file and see how I could change directly the identification of the new drive.
    I am pretty sure I could do that if the files had been on an external USB drive (not considered 'offline'). It's worth trying that for a network drive.
    Tell me if you want to try such a solution. Otherwise, if you have 'written metadata to files', your only immediate chance is to start a new catalog and import from the new drive.

  • Help with Photoshop Elements 9 Organizer

    I need some help with my new Photoshop Elements 9 Organizer.
    I have not had previous versions of Photoshop, this was a brand new installation.  I had previously used Kodak software which came with my camera to organize and edit pictures.
    My PC is approximately 6 years old.  I have a 2.2 ghz processor and 1.5 GB of RAM.  I am running Windows XP Home Edition, Version 2002, Service Pack 3.
    The software seemed to install just fine.  I then imported some pictures from my Kodak folders into the Photoshop Organizer.  After importing pictures I then received the following error message:
    'Elements 9 Organizer has encountered a problem and needs to close.  We are sorry for the inconvenience.'
    If I remove the pictures from the catalog, I no longer get the error message.  As soon as I import any pictures, however, I get the error and the software closes.  When I reopen the organizer I get the same error after after about 15 seconds
    I have tried the following:
    uninstalled an re-installed twice
    turned off the automatic backup to photoshop.com
    I did come across thread 769749 (http://forums.adobe.com/thread/769749) that offered some advice.  Based on that, I optimized my catalog (which was empty), repaired my catalog (which was empty).  I also created a new catalog and removed the existing (empty) catalog.
    All of these efforts have not worked.  Each time I try something, as soon as I import any pictures into the catalog, I get 'Elements 9 Organizer has encountered a problem and needs to close.  We are sorry for the inconvenience.'
    This is brand new software that I am unable to use.
    Adobe, please help.

    Answers to following queries would help-
    * Are you able to import images into Organizer from folder other than your Kodak folders?
    * Is your problem happening for importing from a specific set of folders only?
    * Is your problematic folder having any video files in it which you are importing into Organizer?

  • Need some help with Photoshop Elements Organizer

    I have had this program for awhile now, but have not had a lot of time to spend with it....also on a new Mac.
    I am trying to work with the Organizer.  First time I tried to import photos from IPhoto, it said there was no media to import....(I have a lot of pictures here).  I did some reading of the forums and determined that it might be a bug so I downloaded the update 9.0.3.   Now I am getting an error tht says Photoshop Elements Organizer is attempting to import photos from a default folder.  If I check OK, it begins to import all of my photos.
    Any help on this problem would be most appreciated.
    Thanks
    Frustrated

    The import is working fine. This is a warning message telling you that it is going to import photos and videos from the default folder of your system. Just to inform you about the action it is about to take.
    In case you find it not working, you can log a bug to Adobe at:
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    Cheers,
    Swarnima

  • Help in defining organization structure with reference to new gl

    Hi Experts,
    I need some help in defining organization structure with reference to new GL. I have three legal entities spread across 17 locations. In each location there may be three legal company entities in operation. And in each company code there are 5 to 6 several product lines. I have defined 3 legal entities as 3 company codes, but my concern is how do i define these 17 locations as and how do i define these product lines. We do location wise reporting meaning if i take one location i draw P&L for all the 15 product lines of the combined 3 company codes. Like wise for we do individual location wise reporting. As ususal we do budgeting location wise for departments for each individual company code.
    I thought of using business area as locations, but i heard SAP doesnt support anymore on business due to new gl concept and moreover business area doesnt populate in all transactions. Can we use new gl concept like segments and so, i am sorry i am very new to New gl. Can the location wise combined reporting be done in consolidation or it can achieved in new gl
    Can somebody share their expertise on how to achieve this either my new gl or traditional gl.
    Thanks in advance
    Best Regards,
    gj

    Hi Experts,
    Looking forward some help on this issue.
    Best Regards,
    gj

  • Help with Adobe.premiere.elements12. Please It would appear under the organizer tab that the photos are organised in the lowest folder in the folder structure within Windows Explorer.  How can I use the Windows Explorer structure to organise the photos wi

    Help with Adobe.premiere.elements12. Please
    It would appear under the organizer tab that the photos are organised in the lowest folder in the folder structure within Windows Explorer.  How can I use the Windows Explorer structure to organise the photos within Elements.

    In a situation such as yours, I tend to consolidate items into folders so I have folders of nice workable numbers of images, somewhere between 20 and 200 images. Now, whatever, once you've imported, do your moving within LR, not the OS! I will select all in a folder and drag into a folder a level or two or three above, and then delete the newly empty subfolders. I hope this helps a bit!
    Once you've reached just new Imports of camera output, you'll be flying along.

  • I have a "Contact" organization issue I need help with.  I organize multiple customers under their account affiliation. I place the people with their contact info under each account name by their dept/role in the notes section of their account. I am l

    I have a "Contact" organization issue I need help with.  I organize multiple customers under their account affiliation. I place the people with their contact info under each account name by their dept/role in the notes section of their account. I am looking to be able to directly dial / email from this info in yet notes section located within a contact. On Blackberry, the notes area entered in a contact can connect directly but on the iPhone those numbers/emails are inactive. I am trying to avoid having to create each of these individuals as a separate contact and keep them under their account affiliation. It is easier to find them.  This does not seem like that complicated of a request and hoping someone can tell me how or share an app that will enable the "notes" within a contact be "active". Hope this makes sense.

    I seem to recall that this question has been asked before and I'm pretty sure that the answer is that you can't do what you want to do with the native contact app. However, there are lots of contact apps out there that pull from the built app's data but have other features. Perhaps one of them would meet your needs.

  • Something is happening to my applications downloaded from store......i don't know why. my applications(opened with launchpad) shows 5(4transparent and 1usable)iMovie icons.someone please help me

    something is happening to my applications downloaded from store......i don't know why. my applications(opened with launchpad) shows 5(4transparent and 1usable)iMovie icons.someone please help me

    Hey srihari4b6,
    Thanks for using Apple Support Communities.
    Since there are a few apps that this is happening to you may want to take a look at this article.
    Mac OS X: How to troubleshoot a software issue
    http://support.apple.com/kb/HT1199
    If the issue occurs in various applications, or in Mac OS X
    Have a nice day,
    Mario

  • Be grateful for your help with Photoshop Elements which I have been using for several years.

    Be grateful for your help with Photoshop Elements which I have been using for several years.  Does Elements need to have access to ‘My Pictures’ on Windows as when I remove Photos from ‘My Pictures’, Elements later, when backing up, gives a message that it is unable to ‘reconnect’ to the same picture on elements.  On other occasions when removing a photo from Elements catalogue I also get a similar message when backing up saying ‘unable to reconnect’.  1. Is there a relationship between Elements and My Pictures and is Elements dependant on    the Windows ‘My Pictures’? 2. Why does some photos in Elements in some cases cause them to multiply e.g. double; triple; quadruple; and on occasions even more?  Is there something I need to do to stop this or an easy way I can remove the multiples without spending hours doing it manually one by one?  Am I doing something wrong? My O/S is Windows XP SP2 and windows Vista on my Laptop.  I have been using Elements 5 and have just purchased Photoshop Elements 8.0. (Upgrade) and about to install it. Be grateful for any advice as I do enjoy using the program if only I can resolve this issue.  I am not a PC wiz and mainly use Elements to catalogue photos from which I compile collections and from them slide shows with music.  Any advice appreciated Sonny.t PS Have tried to post this previously but without success so hoping to see message appear and a +response

    The organizer doesn't care where you send your photos when you download them via the downloader or where they happen to be when you first bring them in if you use the Get Photos command, but once your pics are in the Organizer, you *must* move them from within organizer or it can't find them. You don't have to use My Pictures at all if you don't want to, but regardless of the folder where you put your photos, if you want them someplace else, you use organizer to do it.

  • Need help with overlapping divs!

    Hey everyone,
    I'm working on another website and I have come up against a common problem for newbie designers from what I hear, the dreaded overlapping div problem!  I have a 2 column fixed layout with a floating left div.  My left div has my nav bar and various images.  When my main content div has more content than the left floating div, the left div border does not reach the footer!  Until now, I have gotten by with just hitting return in my left column div until it reaches the footer.  I am sure it is not the right way to do it but it has worked so far.  The problem is, now one of the pages has the left column div overlapping onto the footer!  I did some reading and I am guessing it involves either the box properties or clear float which I am not too familiar with.
    Any advice would be stellar!  I know this is just another stumbling block to get over but I would feel so much better if I was doing it the right way. 
    Here are screens of my issue,
    And here is my code for the page in question.
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <link rel="shortcut icon" href="http://www.xldesignsonline.com/fchi/favicon.ico">
    <title>Full Circle Home Inspections</title>
    <link href="_css/main.css" rel="stylesheet" type="text/css" /><!--[if IE 5]>
    <style type="text/css">
    /* place css box model fixes for IE 5* in this conditional comment */
    .twoColFixLtHdr #sidebar1 { width: 230px; }
    </style>
    <![endif]--><!--[if IE]>
    <style type="text/css">
    /* place css fixes for all versions of IE in this conditional comment */
    .twoColFixLtHdr #sidebar1 { padding-top: 30px; }
    .twoColFixLtHdr #mainContent { zoom: 1; }
    /* the above proprietary zoom property gives IE the hasLayout it needs to avoid several bugs */
    </style>
    <![endif]-->
    <style type="text/css">
    <!--
    body {
         background-color: #FFF;
    .paragraphLead {
         font-size: 110%;
         font-weight: bold;
    a:link {
         text-decoration: none;
         color: #CF0;
    a:visited {
         text-decoration: none;
    a:hover {
         text-decoration: none;
    a:active {
         text-decoration: none;
    #apDiv1 {
         position:absolute;
         width:236px;
         height:157px;
         z-index:1;
         left: 692px;
         top: 372px;
    #apDiv2 {
         position:absolute;
         width:200px;
         height:192px;
         z-index:2;
         left: 697px;
         top: 1443px;
    #apDiv3 {
         position:absolute;
         width:158px;
         height:204px;
         z-index:2;
         left: 643px;
         top: 1502px;
    -->
    </style>
    <script src="Scripts/swfobject_modified.js" type="text/javascript"></script>
    </head>
    <body class="twoColFixLtHdr">
    <div id="container">
      <div id="header">
        <h1><!-- end #header -->
      </h1></div>
      <div id="sidebar1">
        <h3 align="center">
          <object id="FlashID" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="200" height="620">
            <param name="movie" value="_assets/menu.swf" />
            <param name="quality" value="high" />
            <param name="wmode" value="opaque" />
            <param name="swfversion" value="6.0.65.0" />
            <!-- This param tag prompts users with Flash Player 6.0 r65 and higher to download the latest version of Flash Player. Delete it if you don’t want users to see the prompt. -->
            <param name="expressinstall" value="Scripts/expressInstall.swf" />
            <!-- Next object tag is for non-IE browsers. So hide it from IE using IECC. -->
            <!--[if !IE]>-->
            <object type="application/x-shockwave-flash" data="_assets/menu.swf" width="200" height="620">
              <!--<![endif]-->
              <param name="quality" value="high" />
              <param name="wmode" value="opaque" />
              <param name="swfversion" value="6.0.65.0" />
              <param name="expressinstall" value="Scripts/expressInstall.swf" />
              <!-- The browser displays the following alternative content for users with Flash Player 6.0 and older. -->
              <div>
                <h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
                <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
              </div>
              <!--[if !IE]>-->
            </object>
            <!--<![endif]-->
          </object>
        </h3>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"><a href="http://www.nachi.org/"><img src="_images/interNACHI.png" alt="InterNACHI" width="190" height="164" border="0" /></a></p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"><a href="http://www.nachi.org/education.htm"><img src="_images/education-seal-small.gif" alt="education seal" width="150" height="150" border="0" /></a></p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"><a href="http://www.iac2.org/"><img src="_images/iac2-all.gif" width="174" height="126" alt="IAC" /></a></p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"><a href="http://www.inspectopia.com/profile.b.507.r.16181.u.03bcfb.html"><img src="_images/logo_top.png" alt="Inspectopedia" width="190" height="45" border="0" /></a></p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"><a href="http://www.energystar.gov/"><img src="_images/img_energy_star_partner.jpg" width="160" height="191" alt="Energy Star Partner" /></a></p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"><a href="http://cjenterprises.myshaklee.com/us/en/welcome.html#"><img src="_images/Shaklee.gif" alt="Shaklee" width="119" height="160" border="0" /></a></p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"><a href="http://activerain.com/"><img src="_images/ARLogoSmall.gif" alt="Active Rain" width="135" height="36" border="0" /></a></p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"><a href="http://www.insiderpages.com/b/15246780294"><img src="_images/insider_pages.gif" alt="Insider Pages" width="89" height="37" border="0" /></a></p>
    <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
      </div>
      <div id="mainContent">
        <h2>Radon Gas Inspection</h2>
        <div id="paragraphFloat">
          <h5>What Is Radon?</h5>
          <p> Radon is a cancer causing radioactive gas. You cannot see, smell or taste radon, but it may be a problem in your home. The Surgeon General has warned that radon is the second leading cause of lung cancer in the United States today. </p>
          <div id="apDiv1">
        <div align="center"><a href="http://www.epa.gov/radon/video/epa-epu.wmv"><img src="_images/psa_revised.jpg" alt="What Is Radon?" width="200" height="172" border="0" /></a></div></div></div>
        <p>If you smoke and your home has high radon levels, you're at high risk for developing lung cancer. Some scientific studies of radon exposure indicate that children may be more sensitive to radon. This may be due to their higher respiration rate and their rapidly dividing cells, which may be more vulnerable to radiation damage. </p>
    <p> </p>
        <h5>Why Is It Dangerous?</h5>
    <p> The U.S. Environmental Protection Agency (US EPA) and the Surgeon General's Office have estimated that as many as 20,000 lung cancer deaths are caused each year by radon. Radon is the second leading cause of lung cancer. Radon-induced lung cancer costs the United States over $2 billion dollars per year in both direct and indirect health care costs.</p>
    <p>According to the US EPA, nearly 1 in 3 homes checked in seven states and on three Indian lands had screening levels over 4 pCi/L, the EPA's recommended action level for radon exposure.</p>
    <p>The alpha radiation emitted by radon is the same alpha radiation emitted by other alpha generating radiation sources such as plutonium.</p>
    <p>A family whose home has radon levels of 4 pCi/l is exposed to approximately 35 times as much radiation as the Nuclear Regulatory Commission would allow if that family was standing next to the fence of a radioactive waste site. (25 mrem limit, 800 mrem exposure)</p>
    <p> At the 4 pCi/l EPA action guideline level, radon carries approximately 1000 times the risk of death as any other EPA carcinogen. It is important to note that the action level is not a safe level, as there are no &quot;safe&quot; levels of radon gas.</p>
    <p> </p>
    <h5>How Does It Get Into My Home?</h5>
    <p> Radon is a radioactive gas. It comes from the natural decay of uranium that is found in nearly all soils. It typically moves up through the ground to the air above and into your home through cracks and other holes in the foundation. Your home traps radon inside, where it can build up. Any home may have a radon problem. This means new and old homes, well-sealed and drafty homes, and homes with or without basements.</p>
    <p> Radon from soil gas is the main cause of radon problems. Sometimes radon enters the home through well water. In a small number of homes, the building materials can give off radon, too. However, building materials rarely cause radon problems by themselves.</p>
    <p><strong>Radon gets in through:</strong></p>
    <ul>
      <li>Cracks in solid floors
        <div id="apDiv3">
          <div align="center"><a href="http://www.fullcirclehomeinspections.com/_assets/CitizensGuideRadon.pdf"><img src="_images/citguidecoverradon.jpg" alt="Guide To Radon" width="154" height="200" border="0" /></a></div>
        </div>
      </li>
      <li>Construction joints</li>
      <li>Cracks in walls</li>
      <li>Gaps in suspended floors</li>
      <li>Gaps around service pipes</li>
      <li>Cavities inside walls</li>
      <li>Surrounding water supply</li>
    </ul>
    <p> </p>
    <h5>What Can I Do?</h5>
    <p> Radon is a national environmental health problem. Elevated radon levels have been discovered in every state. The US EPA estimates that as many as 8 million homes throughout the country have elevated levels of radon. Current state surveys show that 1 home in 5 has elevated radon levels.</p>
    <p> Testing is the only way to know your home's radon levels. There are no immediate symptoms that will alert you to the presence of radon. It typically takes years of exposure before any problems surface. </p>
    <p>Let <strong>Full Circle Home Inspections</strong> ensure your family and your home are protected and safe from radon exposure!</p>
    <p> </p>
    <h5>Radon Myths</h5>
    <p><strong><em>MYTH:</em> Scientists are not sure that radon really is a problem.</strong></p>
    <blockquote>
      <p><strong><em>FACT:</em></strong> Although some scientists dispute the precise number of deaths due to radon, all the major health organizations (like the Centers for Disease Control and Prevention, the American Lung Association and the American Medical Association) agree with estimates that radon causes thousands of preventable lung cancer deaths every year. This is especially true among smokers, since the risk to smokers is much greater than to non-smokers.</p>
    </blockquote>
    <p><strong><em>MYTH:</em> Radon testing is difficult, time-consuming and expensive.</strong></p>
    <blockquote>
      <p><strong><em>FACT:</em></strong> Radon testing is easy. You can test your home yourself or hire a qualified radon test company. Either approach takes only a small amount of time and effort.</p>
    </blockquote>
    <p><strong><em>MYTH:</em> Homes with radon problems can't be fixed.</strong></p>
    <blockquote>
      <p><strong><em>FACT:</em></strong> There are simple solutions to radon problems in homes. Hundreds of thousands of homeowners have already fixed radon problems in their homes. Most homes can be fixed for about the same cost as other common home repairs; check with one or more qualified mitigators. Call your <a href="http://www.epa.gov/radon/whereyoulive.html">state radon office</a> for help in identifying qualified mitigation contractors.</p>
    </blockquote>
    <p><strong><em>MYTH:</em> Radon affects only certain kinds of homes.</strong></p>
    <blockquote>
      <p><strong><em>FACT: </em></strong>House construction can affect radon levels. However, radon can be a problem in homes of all types: old homes, new homes, drafty homes, insulated homes, homes with basements, and homes without basements. Local geology, construction materials, and how the home was built are among the factors that can affect radon levels in homes.</p>
    </blockquote>
    <p><strong><em>MYTH:</em> Radon is only a problem in certain parts of the country.</strong></p>
    <blockquote>
      <p><strong><em>FACT:</em></strong> High radon levels have been found in every state. Radon problems do vary from area to area, but the only way to know your radon level is to test.</p>
    </blockquote>
    <p><strong><em>MYTH:</em> A neighbor's test result is a good indication of whether your home has a problem.</strong></p>
    <blockquote>
      <p><strong><em>FACT:</em></strong> It's not. Radon levels can vary greatly from home to home. The only way to know if your home has a radon problem is to test it.</p>
    </blockquote>
    <p><strong><em>MYTH:</em> Everyone should test their water for radon.</strong></p>
    <blockquote>
      <p><strong><em>FACT:</em></strong> Although radon gets into some homes through water, it is important to first test the air in the home for radon. If your water comes from a public water supply that uses ground water, call your water supplier. If high radon levels are found and the home has a private well, call the Safe Drinking Water Hotline at 1-800-426-4791 for information on testing your water.</p>
    </blockquote>
    <p><strong><em>MYTH:</em> It's difficult to sell homes where radon problems have been discovered.</strong></p>
    <blockquote>
      <p><strong><em>FACT:</em></strong> Where radon problems have been fixed, home sales have not been blocked or frustrated. The added protection is some times a good selling point.</p>
    </blockquote>
    <p><strong><em>MYTH:</em> I've lived in my home for so long, it doesn't make sense to take action now.</strong></p>
    <blockquote>
      <p><strong><em>FACT: </em></strong>You will reduce your risk of lung cancer when you reduce radon levels, even if you've lived with a radon problem for a long time.</p>
    </blockquote>
    <p><strong><em>MYTH:</em> Short-term tests can't be used for making a decision about whether to fix your home.</strong></p>
    <blockquote>
      <p><strong><em>FACT:</em> </strong>A short-term test, followed by a second short-term test* can be used to decide whether to fix your home. However, the closer the average of your two short-term tests is to 4 pCi/L, the less certain you can be about whether your year-round average is above or below that level. Keep in mind that radon levels below 4 pCi/L still pose some risk. Radon levels can be reduced in most homes to 2 pCi/L or below.</p>
      <p> </p>
      <p> </p>
      <p> </p>
      <p align="center"><img src="_images/CA-3.jpg" width="520" height="207" /></p>
    </blockquote>
      </div>
      <div id="footer">
        <p align="center"><strong>© 2009 XL Designs Online - All Rights Reserved </strong></p>
      </div>
    <!-- end #container --></div>
    <script type="text/javascript">
    <!--
    swfobject.registerObject("FlashID");
    //-->
    </script>
    </body>
    </html>
    And here is my CSS if needed,
    @charset "utf-8";
    body  {
         font: 100% Verdana, Arial, Helvetica, sans-serif;
         background: #666666;
         margin: 0; /* it's good practice to zero the margin and padding of the body element to account for differing browser defaults */
         padding: 0;
         text-align: center; /* this centers the container in IE 5* browsers. The text is then set to the left aligned default in the #container selector */
         color: #000000;
    .twoColFixLtHdr #container {
         width: 950px; /* the auto margins (in conjunction with a width) center the page */
         border: 1px solid #000000;
         text-align: left; /* this overrides the text-align: center on the body element. */
         margin-top: 20px;
         margin-right: auto;
         margin-bottom: 20px;
         margin-left: auto;
         background-color: #557050;
    .twoColFixLtHdr #header {
         border-bottom: 1px solid #000000;
         height: 250px;
         background-color: #DDDDDD;
         padding-top: 0;
         padding-right: 10px;
         padding-bottom: 0;
         padding-left: 20px;
         background-image: url(../_images/homebanner1.png);
    .twoColFixLtHdr #header h1 {
         margin: 0; /* zeroing the margin of the last element in the #header div will avoid margin collapse - an unexplainable space between divs. If the div has a border around it, this is not necessary as that also avoids the margin collapse */
         padding: 20px 0; /* using padding instead of margin will allow you to keep the element away from the edges of the div */
         text-align: center;
         font-size: 48px;
         font-family: Tahoma, Geneva, sans-serif;
         color: #000;
    .twoColFixLtHdr #sidebar1 {
         float: left; /* since this element is floated, a width must be given */
         width: 200px;
         border-right: 1px solid #000000;
         background-color: #557050;
         padding-top: 0px;
         padding-right: 10px;
         padding-bottom: 15px;
         padding-left: 10px;
    .twoColFixLtHdr #mainContent {
         margin-top: 0;
         margin-right: 0;
         margin-bottom: 0;
         margin-left: 250px;
         padding-top: 0;
         padding-right: 20px;
         padding-bottom: 0;
         padding-left: 20px;
         text-align: left;
    .twoColFixLtHdr #mainContent h1 {
         font-size: 48px;
         font-family: "Arial Rounded MT Bold";
         font-weight: bold;
    .twoColFixLtHdr #mainContent h2 {
         font-family: "Arial Rounded MT Bold";
         font-size: 32px;
    .twoColFixLtHdr #mainContent h3 {
         font-family: Georgia, "Times New Roman", Times, serif;
         font-style: italic;
         color: #CF0;
         font-size: 125%;
    .twoColFixLtHdr #mainContent h5 {
         font-size: 120%;
    .twoColFixLtHdr #footer {
         padding: 20px 10px 20px 20px;
         border-top: 1px solid #000000;
         background-color: #A3A3A3;
         font-family: Arial, Helvetica, sans-serif;
    .twoColFixLtHdr #footer p {
         margin: 0; /* zeroing the margins of the first element in the footer will avoid the possibility of margin collapse - a space between divs */
         padding: 10px 0; /* padding on this element will create space, just as the the margin would have, without the margin collapse issue */
    .fltrt { /* this class can be used to float an element right in your page. The floated element must precede the element it should be next to on the page. */
         float: right;
         margin-left: 8px;
    .fltlft { /* this class can be used to float an element left in your page */
         float: left;
         margin-right: 8px;
    .clearfloat { /* this class should be placed on a div or break element and should be the final element before the close of a container that should fully contain a float */
         clear:both;
        height:0;
        font-size: 1px;
        line-height: 0px;
    #paragraphFloat {
         width: 350px;
    #paragraphFloat2 {
         width: 350px;
    Please if anyone knows what I'm doing wrong please please let me know!  Since I am learning, I really want to get main concepts like this down so I am not constantly doing things the hard way!  Thank you! 
    Jayson

    1) Regarding validation, what does it do?
    It validates by telling you where your code isn't er... valid.  Sometimes the results are a bit jumbled but if you work through them one at a time and revalidate, it's a good way to learn.  If you fix all of the errors shown up through the validator you should end up with standards compliant code.  Not necessarily the best, most efficient code you can write but at least it will be valid and it helps you spot errors that hours of code-staring never seems to find.
    I don't use the DW validation tool because I find the W3c one easier.
    The W3c validator has a check box of HTML Tidy which can tidy up your code but it's not always as easy to see what changes.
    2) I know the <p> tag for spacing is wrong, I could just feel it in my bones.  I just didn't know what else to do.  If I <br> all the way down won't the code be just as cluttered?
    You're obviously a born web coder!
    <br> will bloat your page if you use them to position elements.
    Here you need to get used to a) the Block Model and b) CSS positioning.  Once you crack these, CSS opens up for you and becomes a little more intuitive.
    if you have two elements on top of each other rather than push them apart with other elements you do it with padding and/or margin.  There are things to watch out for here namely, collapsing margins but if you start to read up on the above, you'll get it.
    I just thought of something.  If I add a div in main content, align it to the bottom center with CSS, use a line break between it and the text above, and add the image in question in the new div, will the spacing between the text and image work itself out?  I just really want to get out of the <p> bad habit.
    Keep thinking!  Web design is not like desktop publishing or print.  Elements on a HTML page don't behave like paragraphs on a page.  Once you begin to figure out why not it all gets a little easier.
    If you want an image at the bottom an element you put that at the end of the content in that element.  Then you need to ensure there is no margin, padding or border between the img element and the next element (your footer).  HTML elements come with some styling that is applied by default in the browser.  Many web developers include a rule like this:
    body {
    margin: 0;
    padding:0;
    This sets the margin and padding to zero of course and it's purpose is to override the defaults.  Some people advocate applying similar rules to all elements and if your interested try googling Eric Meyer who has written about it online.
    One of the key purposes of CSS is to take styling out of the page.  It's leaner, more efficient for the viewer and the coder and helps with site management.
    3) AP divs are weird, and I did only use as a last resort.
    See? You're a natural!
    The reason is I am confused by the float and clear float classes.  My left column is floated left and that element is what I was having problems understanding.  I tried to make new divs and float right but I screwed it all up.  I am sure I am just not applying the clear float in the right places.
    Getting the hang of floating is key to CSS positioning.  You use a float if you want two elements to sit side by side on the page.  It disrupts the "document flow."  Ordinarily HTML elements are rendered one after the other, on top of each other.  Floating an element takes it out of the document flow and allows other elements to occupy its space.  When you float an element it should always have a width.  If the element below it also has a width, that width has to be sufficiently narrow to allow it to occupy the space.  In short, floated elements can't be wider than their containing element.
    The clear property is used after a float to stop an element occupying the space left by a floated element.  It works but confuses the heck out of me!
    So that leads me to my final point.  I am a novice too!  I might have fluffed a few of the technical points above but it's pretty much there.
    Regards
    Martin

  • Please help with a new dual purpose PC build

    Hi everybody in AdobeLand! 
    I've been reading various boards and hardware sites and have started piecing together a dual purpose computer system.  It will be used for both video editing (of pre-shot hacked, high bitrate I-Frame Panasonic GH2 DSLR and camcorder footage using the AVCHD codec @ 1080p 24 and 30 fps) and webcasting/streaming purposes.  I would build two computers for each task, but it's just not in the budget right now.  I'm already stretching things as is. 
    I'm still not sure if I will be using Adobe Premiere or Sony Vegas Pro 12 yet, though it seems like they organize their folders and file structures about the same.  Adobe's cloud service has me a bit scared off right now.  This new scheme feels like they have their hand purpetually in your wallet, which does not sit well with me.  I may still go with Vegas 12 just to avoid that hassle right now.  Help guide me here, experts!  Telestream's Wirecast is being used for multi-cam switching and graphics for live and pre-recorded material being compressed and streamed. 
    Back on topic:
    Here's the build as of right now...
    OS: Windows 7 64-Bit Professional (Windows 8 absolutely sucks!)
    CPU: Intel i7-4930k 6-Core Ivy Bridge (own)
    Motherboard: Asus P9X79 Pro (own)
    Memory: Crucial Ballistix 1.35v Sport DDR3L @ 32 GB (own)
    GPU:  EVGA GTX 770 FTW w/ 4 GB (will buy another HD monitor at a later date, hence the 4GB memory)
    Case:  Fractal Design XL R2 Full Tower
    CPU Cooling:  Noctua NH-D14 w/ SE2011 Bracket
    PSU: Corsair RM1000 Quiet Series / 80 Plus Gold / 1000 Watts
    Monitor: Dell U2412M Ultrasharp 24 inch / 1920x1200
    Optical Drive: LG Blu-ray Writer
    Keyboard: Microsoft 4000 Ergonomic
    HDMI capture cards: Blackmagic Designs Decklink Mini (x2)
    Storage:
    I bought two Samsung 840 Pro SSD drives:  one 128 GB and one 256 GB
    Thinking about possibly 2 (maybe 3-4 if I really stretch) Seagate ST3000DM001 3TB HDD's.
    I could sure use your help with any advise on arranging the storage to get the best bang vs. buck in speed and storage utilization (Wirecast can be setup to record live webcast sessions at 720p or 1080p in compressed files... probably no more than 120 minute webcasts... so that comes into play as well).  Just don't have the funds for an uber-expensive RAID controller card right now.
    Any opinions overall on the parts for the current build?  I still have time to send back and exchange anything already purchased.
    Thank you for your time and consideration.   

    What do you not understand from:
    With all the reading and writing going on, on the boot disk, it is understandable you need a (number of) dedicated disk(s) for video editing, especially with the bandwidths required when the clip duration is short and the number of tracks exceeds one and uses a codec more complex than DV. The kind of files used during editing are, in order of their need for speed:
    Media cache & Media cache database files, created on importing media into a project. They contain indexed, conformed audio and peak files for waveform display.
    Typically small files, but lots of them, so in the end they still occupy lots of disk space.
    Preview (rendered) files, created when the time-line is rendered for preview purposes, the red bar turned to green. Read all the time when previewing the time-line.
    Project files, including project auto-save files, that are constantly being read and saved as auto-save files and written when saving your edits.
    Media files, the original video material ingested from tape or card based cameras. Typically long files, only used for reading, since PR is a non-destructive editor.
    Export files, created when the time-line is exported to its final delivery format. These files are typically only written once and often vary in size from several hundred KB to tens of GB.
    When you are doubting which category of files to put on which kind of disk, especially when using both SSD's and HDD's, keep in mind that the speed advantage of SSD's over HDD's is most noteworthy with the Media cache & Media cache database. These files are frequently accessed, are small and there are many, so reducing latency and seek times and increasing transfer rates pays off by putting these on a SSD, rather than on a HDD, even if it is a raid0. Export files can go to the slowest volume on your system, since you only export once. To help you decide, I have added priority rank-numbers for speed, with 1 for the fastest volume and 5 for the least speed-demanding category.
    and
    Well, in the benchmark tests we have not seen any noticeable difference between SSD and HDD in terms of performance, but logic dictates that there should be a small difference in performance when the volume used for media cache is a SSD, because of the much faster access time and lower latency compared to a conventional disk. If it is noticeable, it is specifically on this volume with the media cache and media cache database, due to the large amount of small files that need to be accessed and written. This argument does not apply to the media volume with a limited number of files, that are very big in size.

  • Help with importing PC photo files and then organizing it all in iPhoto

    Hi everyone,
    I'm relatively new to mac but I am just loving my purchase! I need some serious help with getting all of my photos organized though so I can easily find it for editing in iMovie.
    I've accumulated over 10,000 photos stored on my PC which I've since transferred over to my LaCie external drive for my MacBook Pro via a wireless network connecting my PC & Mac. Some of these I've put onto my laptop internal hard drive and those I've imported into the iPhoto library. However, do I need to move the rest of the photos from my LaCie drive into my internal hard drive to import the photos into iPhoto, or can I tell iPhoto to look for the files in the external drive. If so, how do I do that? I know I'll then have to create albums in order to sort them, which I know how to do. Is there any fast way to do it by date? I had it sorted into different file folders by month & year so I could easily find them on my PC and would like to do the same using albums.
    I am quickly running out of hard drive space on my laptop which is why I've put most of my photos on the external drive. Once I organize my existing collection, I would like to be able to import new pictures and have it stored on my external drive, not my internal drive. How do I do that?
    Any other tips on organizing a massive photo library would be greatly appreciated.
    Thanks,
    Karen

    Karen,
    Is there any fast way to do it by date? I had it sorted into different file folders by month & year so I could easily find them on my PC and would like to do the same using albums.
    This is where you get to enjoy the power of iPhoto's database. You can change the Sort in the View menu. Check out View > Sort Photos > by Date.
    Or, click the little calendar icon near the lower left corner of the iPhoto window. This allows you to filter the library by year, month, week, or date. You can Command-click to add another date to your filter. You can Option-click to choose a recurring date: you get that month or date for all years in your library. [Want to see your kid's birthday for every year? Just Option-Click that date. Cool.]
    The keywords filter is similar. There is a preference setting where you choose to filter based on ALL keywords chosen (where by choosing more keywords you narrow your field) or ANY keyword (where the more keywords you choose, the larger your field will be). Click on a keyword to filter your library by all photos containing that keyword. Use Command-click to add more keywords to the filter. A difference is that Option-click will eliminate photos with that keyword from your filter. [You can find all pictures of your kids with your dog but NOT at Halloween.]
    You can create Smart Albums to combine the use of dates, keywords, ratings, titles, comments and more. The more information you enter into the database, the more powerful the tools become.
    When your task of importing is complete and you are ready to play with iPhoto's features it may help to look at the iPhoto multimedia tutorial. Better organized than trying to read through the Help files, it can help you get acquainted with many of iPhoto's features.
    Have fun.

  • Need help with interface development

    Hi i need help with requirement below with developing interface between or online order system and sap plz lemme know what is bapi i use for creating customer, update and assigining partner id to costumer.
    SAP Development
    1.     Using standards SAP functional module (with BAPI), create interface that will create/change Ordering party customer in SAP. Following fields are mandatory for customer creation:
    •     MANDT     Client
    •     VKORG     Sales organization
    •     VTWEG     Distribution Channel
    •     SPART     Division
    •     KDGRP     Customer Group (= “ZORP)
    •     KUNNR     Customer number
    •     NAME1     Name 1
    •     NAME 2     Name 2 (if required)
    •     SORTL     Search term (short description)
    •     ZZALTKN     Search term 2 (old customer number)
    •     LAND1     Country
    •     ORT01     City
    •     PSTLZ      Zip Code
    •     REGIO      Region (state in USA)
    •     STRAS     Street
    •     TELF1     Primary telephone number
    •     TELFX     Primary Fax number
    •     ZZPRPLANS     Payment Plan
    •     CCINS     Payment card: Card type
    •     CCNUM     Payment cards: Card number
    •     CCDEF     Payment Card: Default Card Indicator
    •     ZBDGID     Customer Budget ID
    •     ZHOLD     Budget Hold indicator
    •     ZZCOSTCENT     Cost Center
    2.     Upon successful customer creation system will issues “S” (success) message that customer has been created.
    3.     New ordering party customer created in step ½, will have to be assigned as new partner to its belonging Sold-to/Ship-to customer. Use standard SAP customer functional module in order to perform this partner ID assignment. Partner ID for ordering party should be “ZO”.
    1.7     Enhancement Functionality
    Apart from creating a new interface to do the required functionality, the Order Create Interface also has to be changed to accommodate a field to pass the Ordering Party Number on the Order. The technicalities of how we are going to implement the interface will be laid out in the Tech Specs.
    Thanks
    in advance

    You have double posted, please mark this one as "solved on my own" and refer to this thread
    need help with interface development
    Regards,
    Rich Heilman

  • Help with referenced files and importing

    This might be more complex than can be addressed here, but I'm struggling with the organization of aperture.
    Because I'm not sure I want use aperture forever, and because I occasionally like to use other photo editors, I've opted for a referenced file setup. I typically arrange my pictures into year/month sub folders, with additional folders for special subjects, like my kids. I've been doing this for a long time, it works for me, and I don't want to change.
    Problem #1 - avoiding duplicates when I import. When I stick the card in my computer I want to copy just the new files to the directory I specify. Image capture only looks for duplicates in the target directory, which is no help if I'm importing files to "November" from a card that has files that were previously imported to "October." The easiest solution would be to delete the images off of the card after importing, but I can't do that - my wife also wants to copy the pix to her computer and she may not copy for several weeks or months at a time.
    I tried using aperture's import feature to copy files directly from my camera's memory card. The import worked, but when I tried to locate the files on disk, aperture told me there were no referenced files. Any idea where they are?
    Problem #2 - import. Is there any way to make Aperture watch referenced directories and automatically add new files to the the appropriate project? It's a pain to keep manually importing files.
    Problem #3 - Organization. Is there any way to set up aperture so that a project = a physical folder on my drive? I get that Aperture is trying to abstract the physical location of my files, but I don't want them abstracted. Also, why is my aperture primary library 6.2 GB when I do all my work with referenced files? Where are my edited files stored? Are these in the primary library? Where are the files from my photostreams (from my phone) stored?
    Would any or all of these issues be resolved by moving to a managed file set up?
    Finally, if I can't get Aperture working the way I need it, any insight into how I'd use it as an external editor to something like Picasa? I really like the aperture editing tools - that's why I bought it. But the workflow is just killing me.
    Any insights would be appreciated. Thanks.

    It is not as complex as you are making it.  Aperture is not per se an editor.  It is for storing and organizing, and quickly decoding RAW images.  It is a pretty good editor, but it has the feature to allow you to specify an External Editor to which you can send images for more complex editing, and back -- all from within Aperture.
    You don't want to have your images referenced so you can also edit them with other programs.  That destroys the non destructive design of Aperture.  If you want Referenced images, you mostly want them so they can be on a different hard drive from that used by the Library for keeping track and storing the adjustments, and not so other programs can access them.
    You need to read further as to how and why Aperture works the way it does.
    Ernie

Maybe you are looking for