Help with limited acc because of withdraw
The other day I actually managed to link my checking account attached to the prepaid debit card I got from card.com. From BanCorp, same folks who issue paypal cards. Anyways, gyft wouldn't let me buy an amazon gift card without an ID... don't have one of those, as they cost money. My friend had sent some money to help me finally get off my feet, a lovely $300. More than I'd ever seen physically. Anyways, I requested a bank transfer. This was rejected, and paypal has locked down my account because the bank said I didn't authorize it (didn't know I needed to call the bank about every little transaction that might take place...). So I went through the stuff to resolve the matter fairly quickly, until I got to proof of address. I don't have much mail, and the bit I have is from my card.com prepaid being mailed, and some from BofA as they accepted my application, and thusly canceled my account the next day. ..yeah. So paypal wants a driver's license and a utility bill. Neither of which I have because of multiple reasons, mainly poverty. My friend just wanted to help me out and first gofundme **bleep** us over and now paypal. Except I don't know if paypal will give him the money back since there's absolutely no way I can provide the information they want as my family doesn't have the means to help me get those things. Please if anyone has any suggestions, it would help incomprehensibly.. this is very depressing to be **bleep** over constantly just because I'm poor and can't have all these things..
can anyone help..? please? this is extremely mean of paypal to do simply because i requested the money be sent so that i could actually use it.. i really dont understand how the bank or why the bank would tell them it was unauthorized.. it's just a deposit, right? nobody ever told me you have to call a bank for every single transaction i assume because it isn't actually necessary..
Similar Messages
-
why is it ok for a verizon wireless service representative to lie to a customer? I went over my monthly data and i called to ask for some help with the overage because i was barely over. They told me they would take care of it and sold me on a shared data plan that would result in 2gb less data but told me i would save 20$ a month. I agreed and recieved my next statement and to my suprise my bill actually went up 15$ a month and i talked to several people and they all told me there is nothing that can be done to get back on the plan i was on and they can not even give me a discount to get me back to what i was paying. They can only offer me a convenience credit. I will be cancelling service.
ajwest101,
We do not want to see you go. I truly apologize for any misinformation regarding your plan. Let's investigate into this a little further. What plan were you on? What plan were you switched to? If you look at the detailed billing online of your previous bill do you see any additional charges other then the plan?
LindseyT_VZW
Follow us on Twitter @VZWSupport -
Help with limitations in a Canvas
Hi!
I'm having some troubles with the limitations of the Canvas, the thing is that i have an array with photos and i show them like the ipod does, the things is that i want to limit the size of the canvas or something, because the images slip outside the canvas, or HBOX or VBOX and overlap the other hbox that i have in the same canvas.
Could you help me? Did you get the idea.
The source is here. http://demo.quietlyscheming.com/displayShelf/index.htmlI seem to recall from the dim and distant past that simply putting "\n" in the text doesn't work. But what does work is setting the label with html rather than plain text - then you can add html line-break code. Or I could be talking out of my arse - can't remember. Try it anyway.
-
I need help with my iPod because I have no idea what to do, help?
Recently, I updated my iPod from iTunes and so I lost access to all my apps that I had on it.
A couple of days before this I had changed my email and password to something I could access more easily.
Because of this, or something that I'm failing to notice or do, I cannot access any of my old accounts on any of my apps. I have fiddled around with game center and tried to figure out if it's because I changed my email or because I updated my iPod. I am very sure that all the information is still there, I only need a way into it. How?
I am at a complete loss, and I've tried everything I can; logging in and out of game center, turnning my iPod off and on, syncing it, but nothing seems to work. Am I missing something? I would really really like it if I were told that I'm just missing something really easy and have this dealt with.
If I can't do anything, is there any way I could have any information I have on my ipod/game center put onto the email I have now?
If anyone at all can help me I would really appriciate it, even if it's like 'you forgot this, stupid'
thank you so much for any kind of help!Hi Light22,
When you say you changed your email and password, did you rename an Apple ID? Create a new one? or just change the email linked to an existing Apple ID?
When you state you cannot access any of your old accounts, how many accounts do you have? It's not a good idea to have things purchased with multiple accounts. App updates for example, require you to be logged in with the account they were purchased with. It's a pain to have to log in and out of various Apple IDs to update your apps. When an old Apple ID (email) goes out of date, people should rename it rather than creating a new Apple ID, How to change the name you use for your Apple ID
Are any of your Apple IDs disabled? That can happen if you mix up the passwords and enter it wrong a few times. See https://iforgot.apple.com/ to reset a disabled Apple ID (the AppleConnect password).
Make sure you are using the correct Apple ID with GameCenter, the one you set it up with. Again, another risk of having multiple active Apple IDs.
ivan -
I need some help with limiter on main outs, gurus please read :)
Hello, I've just recently switched over from PT and I noticed almost immediately upon getting into logic that the main outs seem really loud when following my general mixing workflow that I'm use to using. In fact so much so that I can't really get a final product using ozone 4 like I was able to in PT. When I go to use the final stage of ozone 4 (the limiter) to maximize my volume without clipping, it pretty much just crushes my dynamics and overall mix into rubbish. What's going on here? What am I doing wrong? I'm not even limiting that much. Whereas before in PT I could limit it much more if I wanted to. Is there a setting somewhere in logic i'm missing? I know Pro tools and logic are different beasts so save the crappy comments, but there is a huge difference in main output behavior that just doesn't make sense to me and causes the same plug in (ozone 4) to act much differently.
Well it's not a mental hang up, as I've tried turning down the master fader substantially and ozone 4 still reacts differently than in PT, it sounds better without the loudness maximizer going, fuller and more dynamic. Whereas in PT I was able to utilize the maximizer to bring the volume up to a point and still not smash the mix. I've noticed this with pretty much anything I use a limiter/maximizer on in Logic. I don't understand what's going on. Surely I have something set funky somewhere? It's like it's putting a brick wall limiter on the mix even when I set it to intelligent and tweak everything a bit my meters just straight line, no movement, as if I have my volumes cranked to the max. Very subtle settings in ozone
we're talking -0.4 margin threshold -2.1 character set to very fast in intelligent II mode. This normally gives me a pretty decent amount of threshold adjustment to maximize volume. I'm stumped. -
Need help with Kernel Panic because of Intel Graphics Driver???
Hi,
I was using my mini mac has usual and it crashed! It seems to be related to the intel driver. Dont think I updated recently, although little snitch demo license did seem to run out just before it happened.
At first I could even log into to safe mode, but after several single user mode disk checking I seemed to be able to login through safe mode. Unfortunatley I cant role back, even if this was successful, through my timecapsule because I foolishly(Dont most people do this???) repartitioned my HD and lost my hidden recovery partition.
Anyway, I was thinking that if I can login through safe mode could I copy the driver that it is using to my normal bootup mode??? I have included my kernel panix below. Hope someone can help?
Fri Jun 8 16:44:29 2012
panic(cpu 0 caller 0xffffff80002c473a): Kernel trap at 0xffffff8000293858, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffff8104718308, CR3: 0x0000000000100000, CR4: 0x00000000000606e0
RAX: 0xffffff8004709870, RBX: 0xffffff80046f2f08, RCX: 0xffffff80008bc8c0, RDX: 0x0000000000000060
RSP: 0xffffff80f05ab750, RBP: 0xffffff80f05ab770, RSI: 0xffffff80047182b8, RDI: 0xffffff80008bc920
R8: 0xffffff8104718300, R9: 0xffffff80f05abba0, R10: 0x0000000000000000, R11: 0x0000000000000001
R12: 0x0000000000000000, R13: 0xffffff8000802228, R14: 0x00000000000000ba, R15: 0x0000000000000006
RFL: 0x0000000000010283, RIP: 0xffffff8000293858, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffff8104718308, Error code: 0x0000000000000002, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80f05ab400 : 0xffffff8000220792
0xffffff80f05ab480 : 0xffffff80002c473a
0xffffff80f05ab630 : 0xffffff80002da0cd
0xffffff80f05ab650 : 0xffffff8000293858
0xffffff80f05ab770 : 0xffffff800026a07a
0xffffff80f05ab870 : 0xffffff80002883fc
0xffffff80f05abbd0 : 0xffffff800026721d
0xffffff80f05abc40 : 0xffffff8000648c71
0xffffff80f05abd50 : 0xffffff800064763b
0xffffff80f05abd80 : 0xffffff7f816e990f
0xffffff80f05abde0 : 0xffffff7f816eceaa
0xffffff80f05abe20 : 0xffffff7f81719d36
0xffffff80f05abe60 : 0xffffff800062937d
0xffffff80f05abeb0 : 0xffffff8000629bae
0xffffff80f05abf30 : 0xffffff8000629f29
0xffffff80f05abf70 : 0xffffff8000628b0f
0xffffff80f05abfb0 : 0xffffff8000820057
Kernel Extensions in backtrace:
com.apple.driver.AppleIntelHD3000Graphics(7.1.8)[3907A4CB-8AA1-3F6B-B052-8BA001 8E9C83]@0xffffff7f816cc000->0xffffff7f817acfff
dependency: com.apple.iokit.IOPCIFamily(2.6.8)[F63D4ABE-42DA-33EF-BADD-3415B0CB0179]@0xffff ff7f80826000
dependency: com.apple.iokit.IONDRVSupport(2.3.2)[D05CFB53-FB72-3613-8162-2D188DB04738]@0xff ffff7f80ca8000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.2)[2D2A4A31-EB4F-3730-BE3A-76C061685FC5]@0 xffffff7f80c70000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
System model name: Macmini5,1 (Mac-8ED6AF5B48C039E1)
System uptime in nanoseconds: 17244651626
last loaded kext at 16299815158: com.apple.driver.ApplePlatformEnabler 2.0.5d2 (addr 0xffffff7f81639000, size 20480)
loaded kexts:
at.obdev.nke.LittleSnitch 2.5.1
com.apple.driver.ApplePlatformEnabler 2.0.5d2
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AGPM 100.12.42
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.26
com.apple.driver.AppleIntelHD3000Graphics 7.1.8
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleSMCPDRC 5.0.0d0
com.apple.iokit.IOBluetoothSerialManager 4.0.5f11
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.2
com.apple.driver.AppleMuxControl 3.0.16
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d0
com.apple.driver.AppleLPC 1.5.8
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.5f11
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.0.3
com.apple.driver.AppleFWOHCI 4.8.9
com.apple.driver.AppleUSBHub 4.5.0
com.apple.driver.AirPort.Brcm4331 530.4.20
com.apple.driver.AppleSDXC 1.2.0
com.apple.iokit.AppleBCM5701Ethernet 3.1.2b2
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleAHCIPort 2.3.0
com.apple.driver.AppleUSBEHCI 4.5.8
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleUSBUHCI 4.4.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleSMBIOS 1.8
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 193.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.3
com.apple.driver.AppleIntelCPUPowerManagement 193.0.0
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOFireWireIP 2.2.4
com.apple.driver.AppleHDAController 2.2.0f3
com.apple.iokit.IOHDAFamily 2.2.0f3
com.apple.iokit.IOAudioFamily 1.8.6fc17
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.driver.ApplePolicyControl 3.0.16
com.apple.driver.AppleGraphicsControl 3.0.16
com.apple.iokit.IONDRVSupport 2.3.2
com.apple.driver.AppleSMC 3.1.3d8
com.apple.driver.IOPlatformPluginLegacy 5.0.0d0
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 5.1.0d17
com.apple.driver.AppleThunderboltEDMSink 1.1.8
com.apple.driver.AppleThunderboltEDMSource 1.1.8
com.apple.driver.AppleIntelSNBGraphicsFB 7.1.8
com.apple.iokit.IOGraphicsFamily 2.3.2
com.apple.driver.AppleFileSystemDriver 13
com.apple.driver.AppleThunderboltDPOutAdapter 1.8.2
com.apple.driver.AppleThunderboltDPInAdapter 1.8.2
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.2
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.4
com.apple.driver.AppleUSBBluetoothHCIController 4.0.5f11
com.apple.iokit.IOBluetoothFamily 4.0.5f11
com.apple.iokit.IOUSBHIDDriver 4.4.5
com.apple.driver.AppleUSBComposite 4.5.8
com.apple.driver.AppleThunderboltNHI 1.5.5
com.apple.iokit.IOThunderboltFamily 2.0.0
com.apple.iokit.IOFireWireFamily 4.4.5
com.apple.iokit.IOUSBUserClient 4.5.8
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOUSBFamily 4.5.8
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.5
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 331.6
com.apple.iokit.IOStorageFamily 1.7.1
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.6.8
com.apple.iokit.IOACPIFamily 1.4pbhacker wrote:
Ok. That sounds like a good idea. I do have an image stored on my time capsule. The problem is I can see it whn in safe mode!!! I know the capsule is working correctly because I can see it from another mac.
There is an application called 'restore from time machine...' Can I run this from safe mode??? Tried downloading the restore from usb app but this says that it cant install because the partition was removed!!! How can I use my time capsule to restore to this image???
You need another drive to boot from and this is why I suggested using a directly connected External HD instead of the Time Capsule, plus then you will still have the Time Capsule to fall back on for your data...
pbhacker wrote:
Looks like it was the NEW memory!!! Although I do have a problem...
1. First, I tried the old memory(2 x1GB). That seemed to work.
2. Then I tried the NEW memory again(2 x 4GB). Crashed like it has done in the past.
3. Then I tried the new and old memory(1GB + 4GB). Booted but then crashed when I logged in.
4. Finally tried one new memory stick(4GB). That seems to be working ok.
So, the question is it the NEW memory or is the mac? How can I test this? I guess I cant use the ATH application because there is no memory in that slot?
Any ideas?
You need to reinstall 10.7.4 somewhere so that you have a Restore Partition to work from.
For the AHT see > OS X Lion: Use Apple Hardware Test -
Help with limiting JOptionPane output to 2 decimal places
I don't seem to be able to figure out how to specify 2 decimal points in my output to a JOptionPane. I know how to do this in a standard program with no gui interface but I have been unsuccessful in my attempts with JOptionPane. I have included my code below and any assistance at all would be appreciated.
import javax.swing.JOptionPane;
public class Vehicleanalysis2
public static void main( String args[] )
String januaryRepairs =
JOptionPane.showInputDialog( "Enter January's repair costs:" );
String februaryRepairs =
JOptionPane.showInputDialog( "Enter February's repair costs:" );
String marchRepairs =
JOptionPane.showInputDialog( "Enter March's repair costs:" );
String aprilRepairs =
JOptionPane.showInputDialog( "Enter April's repair costs:" );
String mayRepairs =
JOptionPane.showInputDialog( "Enter May's repair costs:" );
String juneRepairs =
JOptionPane.showInputDialog( "Enter June's repair costs:" );
String julyRepairs =
JOptionPane.showInputDialog( "Enter July's repair costs:" );
String augustRepairs =
JOptionPane.showInputDialog( "Enter August's repair costs:" );
String septemberRepairs =
JOptionPane.showInputDialog( "Enter September's repair costs:" );
String octoberRepairs =
JOptionPane.showInputDialog( "Enter October's repair costs:" );
String novemberRepairs =
JOptionPane.showInputDialog( "Enter November's repair costs:" );
String decemberRepairs =
JOptionPane.showInputDialog( "Enter December's repair costs:" );
double january = Double.parseDouble(januaryRepairs );
double february = Double.parseDouble(februaryRepairs );
double march = Double.parseDouble(marchRepairs );
double april = Double.parseDouble(aprilRepairs );
double may = Double.parseDouble(mayRepairs );
double june = Double.parseDouble(juneRepairs );
double july = Double.parseDouble(julyRepairs );
double august = Double.parseDouble(augustRepairs );
double september = Double.parseDouble(septemberRepairs );
double october = Double.parseDouble(octoberRepairs );
double november = Double.parseDouble(novemberRepairs );
double december = Double.parseDouble(decemberRepairs );
double annualrepaircost = january + february + march + april + may + june + july + august + september + october + november + december;
double payment = annualrepaircost / 12;
if (annualrepaircost <= 3600 )
JOptionPane.showMessageDialog(null, " Keep your car.\n Your monthly repair\n costs only average\n out to be: " + payment + "\n Your annual repair costs\n this year\n were: " + annualrepaircost, " Recommendation", JOptionPane.PLAIN_MESSAGE );
else
JOptionPane.showMessageDialog(null, " You should consider purchasing a new\n car if you can get a payment\n for less than: " + payment + "\n Your annual repair costs\n this year\n were: " + annualrepaircost,
" Recommendation: ", JOptionPane.PLAIN_MESSAGE );
}Hi,
try the following:
double payment;
JOptionPane.showMessageDialog(null, String.format("Payment: %.2f ", payment));
/Mattias -
I need help with a intro because I am really bad with After effects!
So at my school right now we are on a Romeo and Juliet lesson and for a whole 8th grade class activity we are doing something called "Verona's got Talent" its basically like Americas got talent and I was wondering if someone could help me by making an intro to the video. I am hoping it would look like the America's got talent intro but if its not its fine. It should say the Judges names and the names are Romeo Stirn, Juliet Klum, Mercutio Mandel, Mel Benvoilio. The Exctuive Producer Heather Meskimen and the host Nick Shakespeare Cannon. It should be 45 to 1:30 intro and it should have the America's got talent intro music in the back. If you anyone can help me by making this for me it would help ENORMOUSLY. Thank you!!!!
You can learn to do this yourself.
Start here to learn After Effects:
http://adobe.ly/AE_basics -
It's ask me for varitifing questions and a answer them but it doesn't help me can u help
You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(101791) -
Hi. i need help with an applescript, because i think it works, but it doesnt.
--here is some of the users
choose from list {"Kin"}
set resultofkin to {"Kin"}
set resultofgames to {"Play Games"}
set resultofminecraft to {"Minecraft"}
set resultofsteam to {"Steam"}
set resultofblockland to {"Blockland"}
set resultispassword to {text returned:"400401", button returned:"OK"}
if resultofkin is {"Kin"} then
display dialog "Sorry, but you will have to enter a password." default answer ""
if resultispassword is {text returned:"400401", button returned:"OK"} then
choose from list {"Play Games", "Turn Alfred On"}
if resultofgames is {"Play Games"} then
choose from list {"Minecraft", "Blockland", "Steam"}
--minecraft
end if
if resultofminecraft is {"Minecraft"} then
tell application {"Minecraft.app"}
activate
end tell
end if
end if
--alfred
if resultthatisalfred is {"Turn Alfred On"} then
tell application "Alfred 2.app"
activate
--blockland
if resultofblockland is {"Blockland"} then
tell application {"BlocklandLauncher.app"}
activate
end tell
end if
--steam
if resultofsteam is {"Steam"} then
tell application {"Steam.app"}
activate
end tell
end ifYou are missing an end tell for the Alfred 2.app and a couple of end if statements at the end, but if you are looking at using the results of a choose from list command to select applications to activate that is not going to work. As it is, you are just activating everything, since all of your comparisons will evaluate to true.
The display dialog and choose from list commands return a result that can be placed into a variable, that can then be used in your comparisons. Take a look at this article for a tutorial on user interaction. -
Hi all,
I need a help with these queries, because is happening a strange problem when I try to execute it.
This first query is executed faster than the other one, around 30 minutes faster.
The queries are the same, but there is a single difference, I switch the hard code value '5.93218%' in a like condition by a variable P_COD_RAIZ || '%', because it can't be hard code.
SELECT max(oh.ohipp) as mesano_ultfatura
INTO V_MESANO_FATURA
FROM sysadm.orderhdr_all@dl_bsc oh,
customer_all@dl_bsc ca
WHERE ca.custcode like '5.93218%'
and ca.customer_id = oh.customer_id
and oh.ohipp = (select max(yy.ohipp)
from orderhdr_all@dl_bsc yy
where yy.customer_id = oh.customer_id
and oh.ohinvtype = 5);
SELECT max(oh.ohipp) as mesano_ultfatura
FROM sysadm.orderhdr_all@dl_bsc oh,
customer_all@dl_bsc ca
WHERE ca.custcode like P_COD_RAIZ || '%'
and ca.customer_id = oh.customer_id
and oh.ohipp = (select max(yy.ohipp)
from orderhdr_all@dl_bsc yy
where yy.customer_id = oh.customer_id
and oh.ohinvtype = 5);
What I want to know is, why the execution time of the second query is greater than the first, if the only difference between it is a variable instead of hard code?
Thanks,
Murilo.I assume column custcode is also varchar2. Then it looks like a problem with bind values and not evenly distributed data.
When you first run the query with the parameter = '5%' you may get many values and another execution plan as with '5.93218%' on a second run. However the execution plan is saved between the first and second run and not adopted to the new values.
There are ways out of this "bind" problem. But all have to do with providing us a good execution plan first.
However you can start by yourself with forcing the use of the index on the column custcode. -
I need help with resetting my ichat. When i try to login now it wont let me... it says "AOL Instant Messenger password" and then "iChat can't log in to ... because your login ID or password is incorrect. How do I reset this if I cant log in? When I try to press online the same thing pops up and I have no way of logging in or asking for help.
Hi,
iChat (it would help to know which version) can accept Apple IDs as valid AIM Screen Names.
However if you have iChat 5 or earlier you cannot use ones ending in @me.com or @icloud.com issued by iCloud. (they can be used in iChat 6 or Messages as these versions make a double login to AIM and Apple to allow the use of the password).
In addition if you are using an Apple ID for an AIM Screen Name the password still needs to keep to the 16 character limit that AIM has.
AN @mac.com name can be used on any version of iChat (Until the 30th June 2014)
As it does not need a double check with Apple you can use it to log in to the AIM Web pages
Login here with an AIM Name registered at AIM or and @mac.com name and see if you get any suspended account messages.
Sometimes account can be suspended. Usually because something has triggered the "Unusual Activity" item.
About a year ago many @mac.com users that travelled out of their own country found themselves suspended when they got home.
If the Name checks out of if an Apple ID the password in known to be 16 characters or Less then do this:-
In Lion upwards open a Finder Window and use the Go Menu whilst holding down the ALT key.
Select the Library that appears in the menu list.
Navigate to Preferences.
(If you have version earlier than Lion the just navigate to ~/Library/Preferences (that's the Library in you Home - Little House icon - folder)
Fnd com.apple.ichat.aim.plist (even if you are using Messages)
Drag the file to the Trash and Restart the app.
7:39 pm Thursday; May 29, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
Please help with the message I am receving on startup ""You can't open the application NovamediaDiskSupressor because PowerPC applications are no longer supported."
I have read some of the replies in the Apple Support Communities, but as I am no techie, I would have no idea how I would implement that solution.
Please help with what I need to type, how, where, etc.
Many thanks
AppleSueIn HunterCreekI am afraid there is no solution.
PowerPC refers to the processing chip used by Apple before they transferred to Intel chips. They are very different, and applications written only for PPC Macs cannot work on a Mac running Lion.
You could contact the developers to see if they have an updated version in the pipeline. -
i need make mac browsers with windows compatibility, because if i try to se priview from Dw to all browsers on windows PC it will look fine, but same file i trying to see on mac all browsers it will not showing proper..... Please help me for that.
ASk in the DW firum and be much more specific. Web page rendering issues are specific to specific versions of browsers and you may simply be using some bad code that messes up your page.
Mylenium -
I just want to get some help using itunes. I have downladed music - paid for music, and can't get it into itunes. When I used th e'support' thing it just wanted to know my Mac serial numbers!! I don't have a Mac I hace a standard non Mac PC. So why can't I get help with itunes? Its taken me half an hour to get into this support thing because every single name I chose was taken!!!! Its just a nightmare. I hate it!
And now it tells me I must 'choose a community' and itunes isn;t listed! It gets worse! So I chose any community because this is just a never ending nightmare. 40 minutes ago now I clicked on support for itunes and I ended up here!Thanks again. I bought two albums. I've no idea what I use to open a zip file. I just tell it to open and it ususally does but this time Windows media player won't do it!
I am in the UK and its 23.43 so I have to give up and go to bed now. As I said I have had no probes with Amazon downloads. I did email CD baby for help but they just sent the links that you offered earlier.
I have tried to burn to CD so I can listen that way but though I go through all the motions I can't add the tracks to the burn list by copying and pasting, and I can't 'drag the tracks here' beacuse the tracks aren't showing, just the whole album folder. It looks like this:
SO02294360-catherinefeeny12-mp3 (1).zip
file:///C:/Users/User/Downloads/SO02294360-catherinefeeny12-mp3.zip
Show in folderRemove from list
Have to give up for today and go to bed but your responses are very much appreciated. Thank you
Maybe you are looking for
-
Error 'Loading Textfile data into external table'
I am using Apex 2.0, Oralce Database 10G and Internet Explorer (version 6.5) I tried to run following code using SQLCommands of SQLWORKSHOP of Apex Code Here: declare ddl1 varchar2(200); ddl2 varchar2(4000); begin ddl1 := 'create or replace directory
-
My keynote remote will not connect from my iPhone 5s to my iMac after updating to iOS 8.1
I updated my iPhone 5s to iOS 8.1 earlier today and now my remote for Keynote will not connect with my iMac Keynote. I had a presentation tonight and it didn't work. I tried rebooting the phone and it still does not work. Any ideas? (I have Yosemite
-
Keyboard language changed only in Firefox not other programmes
I have Firefox in English but I use a Spanish keyboard, meaning some keys like question marks or quotation marks are in different places, there are accents, a key for ç, etc. It has always worked normally but today, while the keyboard is working corr
-
System Privileges, Object Privileges and Roles in Oracle 10g r2
Hello, I am looking for a comprehensive details about each and every role, privileges(both object and system) that are available in standard Oracle EE 10g r2. I have visited administrator reference manual and other documents from docs.oracle.com but
-
Hello, Each time I want to connect to webdav through windows, I get the following error (after entering credentials): -HTTP/1.1 424 Failed Dependency From the logs on UCM, I get the following traces (see below) Any idea what could cause this problem?