Help with line-in levels, please

I finally got round to plugging my bass into GB, via my iMonster cable. However, the line-in levels was way too high... I had to turn everything right down (both the internal input controls in sys prefs and the out put on my bass) - both were set at 1. And it was still distorting.
Can anyone explain why this was happening, and what I need to do about it!!!!!
The bass is a Wal and it's active!

Hi guys, thanks for the input. It's definitely not the battery. Although that would indeed cause it to sound distorted, it wouldn't make it peak so badly on the line levels.
I will try plugging something else in. But give me a couple of days as I just caught Chicken Pox off of one of my kids... so I'm not doing anything much as yet!
Cheers

Similar Messages

  • Need help with threads?.. please check my approach!!

    Hello frnds,
    I am trying to write a program.. who monitors my external tool.. please check my way of doing it.. as whenever i write programs having thread.. i end up goosy.. :(
    first let me tell.. what I want from program.. I have to start an external tool.. on separate thread.. (as it takes some time).. then it takes some arguments(3 arguments).. from file.. so i read the file.. and have to run tool.. continously.. until there are arguments left.. in file.. or.. user has stopped it by pressing STOP button..
    I have to put a marker in file too.. so that.. if program started again.. file is read from marker postion.. !!
    Hope I make clear.. what am trying to do!!
    My approach is like..
    1. Have two buttons.. START and STOP on Frame..
    START--> pressed
    2. check marker("$" sign.. placed in beginning of file during start).. on file..
         read File from marker.. got 3 arg.. pass it to tool.. and run it.. (on separate thread).. put marker.. (for next reading)
         Step 2.. continously..
    3. STOP--> pressed
         until last thread.. stops.. keep running the tool.. and when last thread stops.. stop reading any more arguments..
    Question is:
    1. Should i read file again and again.. ?.. or read it once after "$" sign.. store data in array.. and once stopped pressed.. read file again.. and put marker ("$" sign) at last read line..
    2. how should i know when my thread has stopped.. so I start tool again??.. am totally confused.. !!
    please modify my approach.. if u find anything odd..
    Thanks a lot in advance
    gervini

    Hello,
    I have no experience with threads or with having more than run "program" in a single java file. All my java files have the same structure. This master.java looks something like this:
    ---master.java---------------------------------------------------
    import java.sql.*;
    import...
    public class Master {
    public static void main(String args []) throws SQLException, IOException {
    //create connection pool here
    while (true) { // start loop here (each loop takes about five minutes)
    // set values of variables
    // select a slave process to run (from a list of slave programs)
    execute selected slave program
    // check for loop exit value
    } // end while loop
    System.out.println("Program Complete");
    } catch (Exception e) {
    System.out.println("Error: " + e);
    } finally {
    if (rSet1 != null)
    try { rSet1.close(); } catch( SQLException ignore ) { /* ignored */ }
    connection.close();
    -------end master.java--------------------------------------------------------
    This master.java program will run continuously for days or weeks, each time through the loop starting another slave process which runs for five minutes to up to an hour, which means there may be ten to twenty of these slave processes running simultaneously.
    I believe threads is the best way to do this, but I don't know where to locate these slave programs: either inside the master.java program or separate slave.java files? I will need help with either method.
    Your help is greatly appreciated. Thank you.
    Logan

  • Need some help with the colour profile please. Urgent! Thanks

    Dear all, I need help with the colour profile of my photoshop CS6. 
    I've taken a photo with my Canon DSLR. When I opened the raw with ACDSee, the colour looks perfectly ok.
    So I go ahead and open in photoshop. I did nothing to the photo. It still looks ok
    Then I'm prompt the Embedded Profile Mismatch error. I go ahead and choose Discard the embedded profile option
    And the colour started to get messed up.
    And the output is a total diasater
    Put the above photo side by side with the raw, the red has became crimson!!
    So I tried the other option, Use the embedded profile
    The whole picture turns yellowish in Photoshop's interface
    And the output is just the same as the third option.
    Could someone please guide me how to fix this? Thank you.

    I'm prompt the Embedded Profile Mismatch error. I go ahead and choose Discard the embedded profile option
    always use the embedded profile when opening tagged images in Photoshop - at that point Photoshop will convert the source colors over to your monitor space correctly
    if your colors are wrong at that point either your monitor profile is off, or your source colors are not what you think they are - if other apps are displaying correctly you most likely have either a defective monitor profile or source profile issues
    windows calibrate link:
    http://windows.microsoft.com/en-US/windows7/Calibrate-your-display
    for Photoshop to work properly, i recall you want to have "use my settings for this device" checked in Color Management> Device tab
    you may want to download the PDI reference image to check your monitor and print workflows
    and complete five easy steps to profile enlightenment in Photoshop
    with your settings, monitor profile and source profiles sorted out it should be pretty easy to pinpoint the problem...

  • Need help with flash player installation please !!!!

    Hello,
    I need help with my flash player installation because every time I access a movie this is the message I receive. 
    This content on Xfinity TV is not available for viewing with Chrome's "Incognito" mode. To play this video using Chrome, please view this page without "Incognito" mode.
    Still having problems? Try resetting your Flash player license.

    Incognito mode is a Google Chrome setting when you open a new window (Cmd+Shift+N on a Mac Ctrl+Shift+N on Windows) It opens a "private" window with no cookies and no tracking. The problem with it is that when you disable cookies, your license files are not sent to the site (whetehr it's YouTube or xFinity or any other that uses license files for paid content)  and it treats you as if you're a first time visitor. Paid videos won't play wihtout the cookies sending the license file info.
    This isn't a Flash Player setting. It's in Chrome. I did some research and according to Google, "Incignito" mode is off by default, and can ONLY be activate by the keyboard shortcut. There IS a way to disable it from the registry http://dev.chromium.org/administrators/policy-list-3#IncognitoModeAvailability

  • Help with css3 rollover tag please

    Hey guys I'm stumped and need help with positioning some big picture buttons.
    Here is the link o the home page http://ceramic-planet2.businesscatalyst.com/
    As u can see I have four picture buttons using css3 roller but I want all four buttons next to each other
    2 buttons next to each other with the next 2 directly below .
    Now orgininally I used the dreamweaver rollover button and everything was inline so flowed across the page no problem. These are divs and I've tried to make 2 panels side by side among other hings but I'm not getting there so I thought one of u clever guys would have no problems telling me what to do.
    Please help I'm not getting the inline or absolute placement right
    Dave

    Hey Dave,
    You need to remove the margin from #mosaicbutton, #kitchenbutton
    and then add float : left; to #bathroombutton, #floorbutton, #mosaicbutton, #kitchenbutton,
    That'll get you buttons sitting the way you want them, you may need to play with the margins after that.
    Pat

  • Some help with the 10g install, please.

    Hi,
    We want to install 10g, we are currently running 9i. We want to do this in silent mode since we have so many databases to move to 10g. We've got a few questions & concerns about the procedures that are supposed to be done.
    If someone could kindly read over some of our concerns, we'd appreciate it.
    First, we used the -record method to create a response file. How much do we have to manually edit that file once Oracle creates it for us? Or is it ready to go after we exit the OUI.
    When we tried to do the install, it said it successfully installed 10g, but it failed on some of the configuration assistants. Do we need to run all of the configuration assistants? I mean, TNS is already configured. Does it change for the 10g install?
    Additionally, once the 10g software is complete, the environment is still set to 9i. How does that get changed for the silent install to continue with the DBUA? I mean, we do have databases that need upgrading.
    Any help with steps would be very helpful to us. We're getting error messages like this:
    The installation of Oracle Database 10g was successful, but some
    optional configuration assistants failed, were cancelled or skipped.
    Please check
    '/ora2/app/oracle/oraInventory/logs/silentInstall2006-10-26_01-26-39PM.log'
    for more details.
    UnsatisfiedLinkError exception loading native library: njni10
    java.lang.UnsatisfiedLinkError: jniGetOracleHome
    at oracle.net.common.NetGetEnv.getOracleHome(Unknown Source)
    at oracle.net.ca.NetCA.main(Unknown Source)
    Oracle Net Services configuration failed. The exit code is -1
    Thank you in advance for your help.

    Hi,
    You are installing in same ORACLE_HOME?
    Your Operation System is UNIX?
    Eder

  • Help with Rendering/Finalizing Project Please?

    Hi,
    I am so new to this entire Adobe and video making that I've spent the last few hours pulling hair literally.  I am hoping that some of you experts can take some time to give this novice some much needed guidance.  Okay, I'm begging!
    I recorded a wedding on a XHA1 MiniDV camera in 1080p 24fps.  Captured the clips to PP CS4 which in turn makes them MPEG, I believe.  Included in my project are addition clips imported from a Canon HF S21 also in 1080p 24fps and a Rebel T2i in ?? format.  Didn't use too many clips from the rebel. 
    Anyhow, my project settings in PP are:
    Video -  Display format = Frames
    Audio - Display format = Audio Samples
    Capture Format = HDV
    All Scratch disks are saved on to my desktop with 284 GB
    Here is a picture of the sequence settings:
    Again, sorry for the ignorance and stupiditiy.  I am wondering what would help.
    I am trying to burn it all with chapter markers and additional features to a DVD.
    - What would be the BEST settings for exporting to Encore? 
    - Should I separate each section into a different sequence - would that help?  For example, the pre-ceremony to one sequence.  The ceremony to another.  The reception to another.    Or should I make new projects for each? 
    - How can I make my computer faster?  Is it the memory, ram, etc?  What should I do?
    Right now, it has failed over and over in rendering in After Effects.  It stops encoding when I export to AME.  It says 158 hours for rendering in PP.
    HELP!
    I am using an iMac and here are computer specs (again, I am not even sure what to post to help you all help me):
      Model Name: iMac
      Model Identifier: iMac11,3
      Processor Name: Intel Core i7
      Processor Speed: 2.93 GHz
      Number Of Processors: 1
      Total Number Of Cores: 4
      L2 Cache (per core): 256 KB
      L3 Cache: 8 MB
      Memory: 8 GB
      Processor Interconnect Speed: 4.8 GT/s
      Boot ROM Version: IM112.0057.B00
      SMC Version (system): 1.59f2
    Here is a pic of what I'm working on.  I know the pic-in-pic feature probably doesn't help with rendering time either but 158 hours is killing me.  In fact, when I go to sleep, I wake up to an error message where PP has closed.

    leevang,
           Your computer looks great.  I wouldn't be too worried about the time PP shows for encoding etc.
    I have found that right when I first start to encode a project, 73 hours or 12 hours is normal. Rendering is not necessary for encoding.  However  when I look back later, the time has dropped greatly.
    Down to 2 or 3 hours.  that's when I follow Jeff B.'s suggestions when I do a  2X scan.......

  • I need help with the https class please.

    Hello, i need add an authentication field in my GET request using HTTPS to authenticate users. I put the authentication field using the setRequestProperty method, but it doesn't appear when i print all properties using the getRequestProperties method. I wrote the following code:
    try{
    URL url = new URL ("https://my_url..");
    URLConnection conexion;
    conexion = url.openConnection();
    conexion.setRequestProperty("Authorization",my_urlEncoder_string);
    conexion.setRequestProperty("Host",my_loginServer);
    HttpsURLConnection httpsConexion = (HttpsURLConnection) conexion;
    httpsConexion.setRequestMethod("GET");
    System.out.println("All properties\r\n: " + httpsConexion.getRequestProperties());
    }catch ....
    when i run the program it show the following text:
    All properties: {Host=[my_loginServer]}
    Only the Host field is added to my HttpsURLConnection. The authentication field doesnt appear in standar output. How can i add to my HttpsURLConnection an Authentication field?
    thanks

    I have moved this to the main Dreamweaver forum, as the other forum is intended to deal with the Getting Started video tutorial.
    The best way to get help with layout problems is to upload the files to a website and post the URL in the forum. Someone can then look at the code, and identify the problem. Judging from your description, it sounds as though the Document window is narrow, which would result in the final menu tab dropping down to the next row. Try turning on Live view or previewing the page in a browser. Design view gives only an approximate idea of the final layout. Live view renders the page as it should look in a browser.

  • I need help with the navigation menu please?

    I have been working my way through your six part printed instructions and I am styling the header and navigation menu.  The bullet points disappeared which was correct and the tabs moved to the right, as they should, but one tab sits underneath another tab and all tabs are covered up by my main heading.  This is dreamweaver CS6.
    It looks a bit of a mess!

    I have moved this to the main Dreamweaver forum, as the other forum is intended to deal with the Getting Started video tutorial.
    The best way to get help with layout problems is to upload the files to a website and post the URL in the forum. Someone can then look at the code, and identify the problem. Judging from your description, it sounds as though the Document window is narrow, which would result in the final menu tab dropping down to the next row. Try turning on Live view or previewing the page in a browser. Design view gives only an approximate idea of the final layout. Live view renders the page as it should look in a browser.

  • Help with some iPhone issues please

    Ok, I am starting to have some problems with my iPhone 3G, and would really appreciate any help with these issues.. here is what is happening
    1) iPhone Vibrate is pretty much broken, turns off and on vibrate by itself.. and now is vibrating very softly.
    2) iPhone wont sync my Music anymore, I have 3 playlists that I use on my iPhone, and none of them will update. When I sync my iPhone, everything syncs but the music.
    3) iPhone sometimes completely freezes and i cant get it to go to the locksreen or power off, so I have to do a hard restart.

    Hi Matt,
    Try restoring the iPhone, this article: http://support.apple.com/kb/HT1414 will walk you through the process.
    If the vibrate and unlock issues persists, the iPhone may need hardware repair. Just make a reservation to have a Genius, at a local Apple retail store, take a look at it or call AppleCare.
    http://www.apple.com/retail/geniusbar/
    U.S. iPhone technical support: 1-800-MY-IPHONE (1-800-694-7466)
    Message was edited by: Jason L

  • Help With Geodetic Rectangular Query Please

    I'm new to spatial so I appreciate your help.
    I have a 3D geodetic coordinate system defined that is index in 2D (lon & lat).
    I want to do a query that returns all points (lat, lon, alt) within the rectangle described by the query.
    I read in the "Oracle Spatial User's Guide" that this rectangle must have 5 points (since I'm using geodetic).
    I have not found a good example of how to format the query. Can you help with an example?

    here is an example which assume a wgs-84 coordinate system (srid=8307). Note that altitude will be ignored.
    select col1,col2,etc
    from geom_table
    where sdo_relate(geom,mdsys.sdo_geometry(2003,8307,NULL,
    mdsys.sdo_elem_info_array(1,1003,1),
    mdsys.sdo_ordinate_array(-70.05,40.8, -69.05,40.8, -69.05,41.2, -70.05,41.2, -70.05,40.8)),
    'mask=anyinteract querytype=window') = 'TRUE';

  • I need help with printing labels.  please

    I need help with printing labels.  thanks in advance

    Welcome to Apple Support Communities.
    In Address Book, first select a name or group of names to print.
    Then File, Print, select Style, Mailing Labels, then Layout to select a specific target label (such as an Avery number), or define your own...

  • Need help with " Number guessing game " please?

    This is what teacher requires us to do for this assignment:
    Write a program that plays a simple number guessing game. In this game the user will think of a number and the program will do the guessing. After each guess from the program, the user will either indicate that the guess is correct (by typing �c�), or that the next guess should be higher (by typing �h�), or that it should be lower (by typing �l�). Here is a sample output for a game. In this particular game the user thinks of the number 30:
    $java GuessingGameProgram
    Guess a number between 0 and 100
    Is it 50? (h/l/c): l
    Is it 25? (h/l/c): h
    Is it 37? (h/l/c): l
    Is it 31? (h/l/c): l
    Is it 28? (h/l/c): h
    Is it 29? (h/l/c): h
    Is it 30? (h/l/c): c
    Thank you for playing.
    $
    This program is implementing a binary search algorithm, dividing the range of possible values in half with each guess. You can implement any algorithm that you want, but, all things being equal, binary search is the best algorithm.
    Write the program so that the functionality is split between two classes: GuessingGameProgram, and NumberGuesser.
    GuessingGameProgram will only be used for its main function. It should instantiate a NumberGuesser, and it will be responsible for the loop that notifies the user of the next guess, reads the �h�, �l�, or �c� from the user, and sends an appropriate message to the number guesser accordingly.
    The guesses themselves should all be generated by the NumberGuesser class. Here is a diagram of the members and methods for the class. Notice that the members are unspecified. Feel free to give your NumberGuesser class any members (which we have also been calling fields, or instance variables) that you find useful. Make them all private.
    NumberGuesser
    NumberGuesser(int upperLimit, int lowerLimit)
    int guess()
    void higher()
    void lower()
    The constructor should take two integer arguments, a lower and upper bound for the guesses. In your program the constructor will be called with bounds of 0 and 100.
    The guess method should return the same value if it is called more than once without intervening calls to the lower or higher methods. The class should only change its guess when it receives a message indicating that its next guess should be higher or lower.
    Enjoy. Focus your attention on the NumberGuesser class. It is more interesting than the GuessingGameProgram class because it is a general-purpose class, potentially useful to anybody who is writing a number guessing game. Imagine, for instance, that a few weeks from now you are asked to write a number guessing game with a graphical Java Applet front end. If you NumberGuesser class is well written, you may be able to reuse it without any modifications.
    I'm new to JAVA and I'm set with my 2nd homework where I'm so confused. I know how to do something of this source in C language, but I'm a bit confused with Java. This is the code me and my classmate worked on, I know it's not 100% of what teacher asked, but is there any way possibly you guys could help me? I wrote this program if the game is played less then 10 times, thought I would then re-create a program without it, but now I'm confused, and my class book has nothing about this :( and I'm so confused and lost, can you please help? And out teacher told us that it's due the end of this week :( wish I knew what to do. Thank you so so much.
    Here's the code:
    import java.text.*;
    import java.io.*;
    class GuessingGame
    public static void main( String[] args ) throws IOException
    BufferedReader stdin = new BufferedReader(new InputStreamReader( System.in ) );
    int guess = 0, limit = 9, x = 0, n, a = 0 ;
    double val = 0 ;
    String inputData;
    for ( x = 1; x <= 10; x++)      //number of games played
    System.out.println("round " + x + ":");
    System.out.println(" ");
    System.out.println("I am thinking of a number from 1 to 10. ");
    System.out.println("You must guess what it is in three tries. ");
    System.out.println("Enter a guess: ");
    inputData = stdin.readLine();
    guess = Integer.parseInt( inputData );
    val = Math.random() * 10 % limit + 1;     //max limit is set to 9
    NumberFormat nf = NumberFormat.getNumberInstance();
    nf.setMaximumFractionDigits(0);               //format number of decimal places
    String s = nf.format(val);
    val = Integer.parseInt( s );
         for ( n = 1; n <= 3; n++ )      //number of guess's made
                   if ( guess == val)
                        System.out.println("RIGHT!!");                    //if guess is right
                        a = a + 1;
                        System.out.println("You have won " + a + " out of " + x + " rounds");
    System.out.println(" ");
    n = 3;
    continue;
              if (n == 3 && guess != val)                         //3 guesses and guess is wromg
                        System.out.println("wrong");
    System.out.println("The correct number was " + val);
                        System.out.println("You have won " + a + " out of " + x + " rounds");
    System.out.println(" ");
    continue;
                   //how close guess is to value
                   if ( guess == val - 1 || val + 1 == guess) //Within 1
                   System.out.println("hot");
         else if ( guess == val - 2 || val + 2 == guess) // Within 2
                   System.out.println("warm");
              else
                   System.out.println("cold");                         // Greater than 3
         inputData = stdin.readLine();
         guess = Integer.parseInt( inputData );
    //ratings
    if ( a <= 7)
         System.out.println("Your rating is: imbecile.");
    else if ( a <= 8)
         System.out.println("Your rating is: getting better but, dumb.");
    else if (a <= 9)
         System.out.println("Your rating is: high school grad.");
    else if ( a == 10)
         System.out.println("Your rating is: College Grad.!!!");

    Try this.
    By saying that, I expect you ,and your classmate(s), to study this example and then write your own. Hand it in as-is and you'll be rumbled as a homework-cheat in about 20ms ;)
    When you have an attempt where you can explain, without refering to notes, every single line, you've cracked it.
    Also (hint) comment your version well so your tutor is left with the impression you know what you're doing.
    In addition (huge hint) do not leave the static inner class 'NumberGuesser' where it is. Read your course notes and find out where distinct classes should go.
    BTW - Ever wonder if course tutors scan this forum for students looking for help and/or cheating?
    It's a double edged sword for you newbies. If you ask a sensible, well researched question, get helpful answers and apply them to your coursework, IMHO you should get credit for doing that.
    On the other hand, if you simply post your assignment and sit there hoping some sucker like me will do it for you, you should be taken aside and given a good kicking - or whatever modern educational establishments consider appropriate abmonishment ;)
    I'd say this posting is, currently, slap bang between the two extreemes, so impress us. Post your solution in the form you intend to hand it in, and have us comment on it.
    Good luck!
    import java.io.InputStreamReader;
    import java.io.BufferedReader;
    public class GuessingGame
         public static void main(String[] args)
              throws Exception
              BufferedReader reader= new BufferedReader(
                   new InputStreamReader(System.in));
              NumberGuesser guesser= new NumberGuesser(0, 100);
              System.out.println(
                   "\nThink of a number between 0 and 100, oh wise one...");
              int guess= 0;
              while (true) {
                   guess= guesser.guess();
                   System.out.print("\nIs it " +guesser.guess() +"? (h/l/c) ");
                   String line= reader.readLine();
                   if (line == null) {
                        System.out.println(
                             "\n\nLeaving? So soon? But we didn't finish the game!");
                        break;
                   if (line.length() < 1) {
                        System.out.println("\nPress a key, you muppet!");
                        continue;
                   switch (line.toLowerCase().charAt(0)) {
                        case 'h':  
                             guesser.higher();
                             break;
                        case 'l':     
                             guesser.lower();
                             break;
                        case 'c':
                             System.out.println("\nThank you for playing.");
                             System.exit(0);
                        default:
                             System.out.println(
                                  "\nHow hard can it be? Just press 'h' 'l' or 'c', ok?");
                             continue;
                   if (guess == guesser.guess()) {
                        System.out.println(
                             "\nIf you're going to cheat, I'm not playing!");
                        break;
         private static class NumberGuesser
              private int mLower;
              private int mUpper;
              private int mGuess;
              NumberGuesser(int lowerLimit, int upperLimit)
                   mLower= lowerLimit;
                   mUpper= upperLimit;
                   makeGuess();
              private void makeGuess() {
                   mGuess= mLower + ((mUpper - mLower) / 2);
              int guess() {
                   return mGuess;
              void higher()
                   mLower= mGuess;
                   makeGuess();
              void lower()
                   mUpper= mGuess;
                   makeGuess();
    }                  

  • [LSMW][IDOC Method] Help with CLFMAS Classification issue please

    Hello Everybody,
    I'm using CLFMAS for classification, I need to have 3 caracteristics ( I'm talking about segment : E1AUSPM ), I mean for example :
    E1AUSPM-MSGFN = '009'
    E1AUSPM-ATNAM = 'Characteristic 1' (it's a hardcoded value)
    E1AUSPM-ATWRT = MyStrucutre - Field1
    E1AUSPM-MSGFN = '009'
    E1AUSPM-ATNAM = 'Characteristic 2' (it's a hardcoded value)
    E1AUSPM-ATWRT = MyStrucutre - Field2
    E1AUSPM-MSGFN = '009'
    E1AUSPM-ATNAM = 'Characteristic 3' (it's a hardcoded value)
    E1AUSPM-ATWRT = MyStrucutre - Field3
    Can anyone please help me to resolve this issue. I'm thinking of using Transfer Record but I don't know how to do this exactly.
    Thanks for any possible help you would give

    I find the solution, hope it will help somebody else.
    1 - In the ' Field mapping and conversion rules 'step, press CTRL+F7. In the popup shown, check ' Processing Times '.
    2 - You're gonna see 'begin_of_record' and 'end_of_record' instructions in each segment.
    3 - Choose the segment you want to duplicate
    4 - Assign Characteristic1 and MyStructure-Field1 to the corresponding fields.
    5 - In the end_of_record instruction, add the following lines :
    E1AUSPM-ATNAM = 'CHARACTERISTIC 2'.
    E1AUSPM-ATWRT = MyStructure-Field2.
    transfer_record.
    E1AUSPM-ATNAM = 'CHARACTERISTIC 3'.
    E1AUSPM-ATWRT = MyStructure-Field3.
    transfer_record.
    NB : E1AUSPM is the name of the segment I want to duplicate.
            MyStructure is the name of the source structure I use.
            Field1 and Field2 are the source fields I want to map with the field ATWRT of E1AUSPM segment.
    If you don't get something, I'm here to help.

  • Need help with iphone battery charging please

    hey all,
    i have a problem with charging iphone battery,
    i´ve had the phone for 8months now with no problems at all,
    yesterday i used it as a modem for connecting to the internet and it worked just fine but the battery died so quick and now it wont charge at all
    i used both charge connector and USB drive in the computer - nothing works, i already tried resseting it several times - didnt work either, i also tried plugging in a different cable - thta didnt help either so its basically turned into a brick, i noticed tho when i try to restart it there´s a couple wierd lines on my display but then it doesnt turn on or anything, it goes back to a black screen with battery picture and one red line indicating i need to charge it...
    i tried to charge it overnight but the red line on the battery pic doesnt move or anything, there´s no sign of it charging at all and it doesnt even want to sync with the computer, i dont know what else to try
    please help someone
    thankyou
    Message was edited by: LailaGerard

    The iPhone includes a one year warranty.
    If you are in a country where Apple provides direct support and has an Apple store, you can contact Apple or make an appointment at an Apple store if there is one nearby.
    If you live an a country where Apple doesn't provide direct support - support for the iPhone is handled by the official carrier for the iPhone, contact your carrier.

Maybe you are looking for