Help with locating and moving archives

Hi all, not sure where to post this but here goes.
We are currently planning to centralize all archives to one server as they are quite disparate at the moment. I have a program that finds the locations of the archives from groupwise but the issue is some are on the network and some are on the local drives. Of course d:\archives means nothing to most people as the pc name is required to locate. Is there a program that can automate the location and relocation of archives??? Id hate to have to locate over 300 archives manually
Thanks

On 7/11/2011 6:06 PM, tugless wrote:
>
> Hi all, not sure where to post this but here goes.
>
> We are currently planning to centralize all archives to one server as
> they are quite disparate at the moment. I have a program that finds the
> locations of the archives from groupwise but the issue is some are on
> the network and some are on the local drives. Of course d:\archives
> means nothing to most people as the pc name is required to locate. Is
> there a program that can automate the location and relocation of
> archives??? Id hate to have to locate over 300 archives manually
>
> Thanks
>
>
You could write one, but realize it wouldn't work well for 2 reasons.
1. It would have to run while the user was logged on, on their
workstation or it might not have rights to the right mapped drive.
2. Consolidation is not always wise. In fact it is a recipe for DISASTER
if you are not careful. You must create a structure like this
BASE\PO\<archive>
in short, a base directory, followed by a subdirectory PER po.
Why? Remember the archive stores stuff by FID, not GUID. FIDs are OnLY
unique per PO, and clash fairly often in practice otherwise. You do not
want that- you will lose mail that way!

Similar Messages

MOVED: [Athlon64] Need Help with X64 and Promise 20378

This topic has been moved to Operating Systems.
[Athlon64] Need Help with X64 and Promise 20378

I'm moving this the the Administration Forum. It seems more apporpiate there.

Help with writing and retrieving data from a table field with type "LCHR"

Hi Experts,
I need help with writing and reading data from a database table field which has a type of "LCHR". I have given an example of the original code but don't know what to change it to in order to fix it and still read in the original data that's stored in the LCHR field.
Basically we have two Function modules, one that saves list data to a database table and one that reads in this data. Both Function modules have an identicle table which has an array of fields from type INT4, CHAR, and type P. The INT4 field is the first one.
Incidentally this worked in the 4.7 non-unicode system but is now dumping in the new ECC6 Unicode system.
Thanks in advance,
C
SAVING THE LIST DATA TO DB
DATA: L_WA(800).
LOOP AT T_TAB into L_WA.
ZDBTAB-DATALEN = STRLEN( L_WA ).
MOVE: L_WA to ZDBTAB-RAWDATA.
ZDBTAB-LINENUM = SY-TABIX.
INSERT ZDBTAB.
READING THE DATA FROM DB
DATA: BEGIN OF T_DATA,
             SEQNR type ZDBTAB-LINENUM,
             DATA type ZDBTAB-RAWDATA,
           END OF T_TAB.
Select the data.
SELECT linenum rawdata from ZDBTAB into table T_DATA
     WHERE repid = w_repname
     AND rundate = w_rundate
     ORDER BY linenum.
Populate calling Internal Table.
LOOP AT T-DATA.
APPEND T_DATA to T_TAB.
ENDLOOP.

Hi Anuj,
The unicode flag is active.
When I run our report and then to try and save the list data a dump is happening at the following point
LOOP AT T_TAB into L_WA.
As I say, T_TAB consists of different fields and field types whereas L_WA is CHAR 800. The dump mentions UC_OBJECTS_NOT_CONVERTIBLE
When I try to load a saved list the dump is happening at the following point
APPEND T_DATA-RAWDATA to T_TAB.
T_DATA-RAWDATA is type LCHR and T_TAB consists of different fields and field types.
In both examples the dumps mention UC_OBJECTS_NOT_CONVERTIBLE
Regards
C

Help with count and sum query

Hi I am using oracle 10g. Trying to aggregate duplicate count records. I have so far:
SELECT 'ST' LEDGER,
CASE
WHEN c.Category = 'E' THEN 'Headcount Exempt'
ELSE 'Headcount Non-Exempt'
END
ACCOUNTS,
CASE WHEN a.COMPANY = 'ZEE' THEN 'OH' ELSE 'NA' END MARKET,
'MARCH_12' AS PERIOD,
COUNT (a.empl_id) head_count
FROM essbase.employee_pubinfo a
LEFT OUTER JOIN MMS_DIST_COPY b
ON a.cost_ctr = TRIM (b.bu)
INNER JOIN MMS_GL_PAY_GROUPS c
ON a.pay_group = c.group_code
WHERE a.employee_status IN ('A', 'L', 'P', 'S')
AND FISCAL_YEAR = '2012'
AND FISCAL_MONTH = 'MARCH'
GROUP BY a.company,
b.district,
a.cost_ctr,
c.category,
a.fiscal_month,
a.fiscal_year;
which gives me same rows with different head_counts. I am trying to combine the same rows as a total (one record). Do I use a subquery?

Hi,
Whenever you have a problem, please post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) from all tables involved.
Also post the results you want from that data, and an explanation of how you get those results from that data, with specific examples.
user610131 wrote:
... which gives me same rows with different head_counts.If they have different head_counts, then the rows are not the same.
I am trying to combine the same rows as a total (one record). Do I use a subquery?Maybe. It's more likely that you need a different GROUP BY clause, since the GROUP BY clause determines how many rows of output there will be. I'll be able to say more after you post the sample data, results, and explanation.
You may want both a sub-query and a different GROUP BY clause. For example:
WITH    got_group_by_columns     AS
     SELECT a.empl_id
     ,     CASE
                    WHEN c.category = 'E'
              THEN 'Headcount Exempt'
                    ELSE 'Headcount Non-Exempt'
            END          AS accounts
     ,      CASE
                    WHEN a.company = 'ZEE'
                    THEN 'OH'
                    ELSE 'NA'
            END          AS market
     FROM              essbase.employee_pubinfo a
     LEFT OUTER JOIN mms_dist_copy             b ON   a.cost_ctr     = TRIM (b.bu)
     INNER JOIN       mms_gl_pay_groups        c ON   a.pay_group      = c.group_code
     WHERE     a.employee_status     IN ('A', 'L', 'P', 'S')
     AND        fiscal_year           = '2012'
     AND        fiscal_month          = 'MARCH'
SELECT    'ST'               AS ledger
,       accounts
,       market
,       'MARCH_12'          AS period
,       COUNT (empl_id)      AS head_count
FROM       got_group_by_columns
GROUP BY accounts
,            market
;But that's just a wild guess.
You said you wanted "Help with count and sum". I see the COUNT, but what do you want with SUM? No doubt this will be clearer after you post the sample data and results.
Edited by: Frank Kulash on Apr 4, 2012 5:31 PM

Help needed with consolidating and moving itunes folder.

I have imported songs into itunes using with the Copy Files To iTunes Folder When Adding To The Library box unchecked and moved the location of my music folder to an external hard drive. I already had a folder full of music files on this hard drive so I now have 2 folders with music files, the iTunes folder with music recently imported from cd's and the old folder. The library points to references to both of these folders but not ALL of the files in the old folder as I don't need them in iTunes.
I now want to be able to listen to my iTunes library when not connected to the external drive. How do I do this? If I reset the location of my iTunes folder back to the macbook do I then need to consolidate, and if I do will only the files with reference pointers go into this folder? I don't want all the music files in the old folder to go onto the macbook, only the ones with reference pointers to them, plus the ones in the iTunes music folder.

I have imported songs into itunes using with the Copy Files To iTunes Folder When Adding To The Library box unchecked and moved the location of my music folder to an external hard drive. I already had a folder full of music files on this hard drive so I now have 2 folders with music files, the iTunes folder with music recently imported from cd's and the old folder. The library points to references to both of these folders but not ALL of the files in the old folder as I don't need them in iTunes.
I now want to be able to listen to my iTunes library when not connected to the external drive. How do I do this? If I reset the location of my iTunes folder back to the macbook do I then need to consolidate, and if I do will only the files with reference pointers go into this folder? I don't want all the music files in the old folder to go onto the macbook, only the ones with reference pointers to them, plus the ones in the iTunes music folder.

Can I get some help with CF8 and Unix from this forum?

I did my dev in my local machine running windowsXP and CF8
In prod. environment, my CF8 runs in Unix and I'm not familiar with Unix at all.
My manager is out for awhile and I want to do this if I could without waiting for him because in windows it is very simple.
Here is what I did in windows and I think I should do the same in unix but unfortunately I don't know how:
In Windows environment I have done the following successfully and easy:
1. installed/moved a .exe file in 2 folders: 1. in cfx folder under Coldfusion8 folder and
2. and again in CFClasses folder under WEB-INF folder
2. Then in CF8 administrator I went to SERVER SETTINGS >> Java and JVM >> under ColdFusion Class Path, I put: c:\Coldfusion8\cfx\cfx_myexe.jar >> submit
3. Under CFX Tags >> clicked REGISTER Java CFX >> I put: cfx_myexe in Tag Name and the same in Class Name >>submit
Then when I go to my application, everything work as a charm!
How can I do these things in Unix?
When I logged into CF server in unix using my FTP FileZilla, I immediately see /space/users/www , so I'm in the root directory. I can't see anything above this directory
In windows, CFX is found under ColdFusion8 folder AND cfclasses is found under WEB-INF folder like this:
C:/ColdFusion8/www/WEB-INF/cfclasses
All my CF files for the application are on C:/Inetpub/www/myfolder/
So my questions are:
1. How can I access point 1 using my FTP to move my exe file to the right folders
2. Since I don't have CF administrator interface with Unix, how can I do point 2 and 3 above????
I have searched on this forum if someone had this problem in the past and also googled it but I got no result.

1) If the account you use to FTP to the site does not give you permissions to the ColdFusion instlation directories, you will need to ask permission from whomever in your organization provides those permissions.
2) You would run the same ColdFusion administrator tool. It is usually located at yourwebsite-domain/cfide/administrator/
If it is not located at this location, you need to ask whomever controls your ColdFusion server where it is located and how you should access it.
In otherwords, these are not general problems that we can help you with much. These are specific problems dealing with your organizaiton and how it has configured its systems and network.

Need help with ACLs and propagating permissions

I'm currently setting up our new server, for which we're moving away from Windows entirely (both on the server and user workstation ends), and I'm currently having some questions about permissions. I've been scouring the OS X Server Advanced Admin pdf, but there are numerous holes in the exposition of permissions from the ACLs down to the proper way to propagate permissions when a manual touch is required. What I'm trying to do is allow one group to have read access only until they get to a certain subdirectory, at which point they can then write to that level; then for the second group, they only need read access for a specific folder down the line from the starting directory. I'll include some example images with a test folder I've created so that it may be a little easier to understand what my goals are with the Server app's permissions. Thank you in advance for all your help.

You need the advanced permissions editor. You are trying to convert inherited permissions to explicit. If I understand what you want, you would go about it like this.
You have two groups; GroupA and GroupB. GroupA is the limited group. You want them to be able to read everything and write to limited locations. GroupB can read and write everywhere. So based on your example, you would do this to start:
At the parent folder level, you are defining GroupA to be able to read and GroupB to read and write.
Now to drill down. In Server.app select your server. This is the first item in the side bar. On the right, choose Storage. Drill down to where your shared folder is located and select it. From the Gear menu, chose Edit Permissions as shown here:
You will note that GroupA and GroupB are both gray. This denotes that they are inherited entries at this level. You must break the inheritance and start over. To do this, press the small gear icon on the edit permissions sheet and choose "Make Inherited Entries Explicit." GroupA and GroupB will turn black, allowing you to edit them. Change GroupA from Read to Read Write. Press OK to close the sheet.
Now, if you already have data inside the folder, you can use the large gear menu and choose Propagate Permissions. This will ensure that your data will reset with the new ACL.
Reid
Apple Consultants Network
Author "Mavericks Server – Foundation Services" :: Exclusively available in Apple's iBooks Store
Author "Mavericks Server – Control and Collaboration" :: Exclusively available in Apple's iBooks Store

Help with encapsulation and a specific case of design

Hello all. I have been playing with Java (my first real language and first OOP language) for a couple months now. Right now I am trying to write my first real application, but I want to design it right and I am smashing my head against the wall with my data structure, specifically with encapsulation.
I go into detail about my app below, but it gets long so for those who don't want to read that far, let me just put these two questions up front:
1) How do principles of encapsulation change when members are complex objects rather than primitives? If the member objects themselves have only primitive members and show good encapsulation, does it make sense to pass a reference to them? Or does good encapsulation demand that I deep-clone all the way to the bottom of my data structure and pass only cloned objects through my top level accessors? Does the analysis change when the structure gets three or four levels deep? Don't DOM structures built of walkable nodes violate basic principles of encapsulation?
2) "Encapsulation" is sometimes used to mean no public members, othertimes to mean no public members AND no setter methods. The reasons for the first are obvious, but why go to the extreme of the latter? More importantly HOW do you go to the extreme of the latter? Would an "updatePrices" method that updates encapsulated member prices based on calculations, taking a single argument of say the time of year be considered a "setter" method that violates the stricter vision of encapsulation?
Even help with just those two questions would be great. For the masochistic, on to my app... The present code is at
http://www.immortalcoil.org/drake/Code.zip
The most basic form of the application is statistics driven flash card software for Japanese Kanji (Chinese characters). For those who do not know, these are ideographic characters that represent concepts rather than sounds. There are a few thousand. In abstract terms, my data structure needs to represent the following.
- There are a bunch of kanji.
   Each kanji is defined by:
   - a single character (the kanji itself); and
   - multiple readings which fall into two categories of "on" and "kun".
      Each reading is defined by:
      - A string of hiragana or katakana (Japanese phoenetic characters); and
      - Statistics that I keep to represent knowledge of that reading/kanji pair.Ideally the structure should be extensible. Later I might want to add statistics associated with the character itself rather than individual readings, for example. Right now I am thinking of building a data structure like so:
- A Vector that holds:
   - custom KanjiEntry objects that each hold
      - a kanji in a primitive char value; and
      - two (on, kun) arrays or Vectors of custom Reading objects that hold
         - the reading in a String; and
         - statistics of some sort, probably in primitive valuesFirst of all, is this approach sensible in the rough outlines?
Now, I need to be able to do the obvious things... save to and load from file, generate tables and views, and edit values. The quesiton of editting values raises the questions I identified above as (1) and (2). Say I want to pull up a reading, quiz the user on it, and update its statistics based on whether the user got it right or wrong. I could do all this through the KanjiEntry object with a setter method that takes a zillion arguments like:
theKanjiEntry.setStatistic(
"on",   // which set of readings
2,      // which element in that array or Vector
"score", // which statistic
98);      // the valueOr I could pass a clone of the Reading object out, work with that, then tell the KanjiEntry to replace the original with my modified clone.
My instincts balk at the first approach, and a little at the second. Doesn't it make more sense to work with a reference to the Reading object? Or is that bad encapsulation?
A second point. When running flash cards, I do not care about the subtlties of the structure, like whether a reading is an on or a kun (although this is important when browsing a table representing the entire structure). All I really care about is kanij/reading pairings. And I should be able to quickly poll the Reading objects to see which ones need quizzing the most, based on their statistics. I was thinking of making a nice neat Hashtable with the keys being the kanji characters in Strings (not the KanjiEntry objects) and the values being the Reading objects. The result would be two indeces to the Reading objects... the basic structure and my ad hoc hashtable for runninq quizzes. Then I would just make sure that they stay in sync in terms of the higher level structure (like if a whole new KanjiEntry got added). Is this bad form, or even downright dangerous?
Apart from good form, the other consideration bouncing around in my head is that if I get all crazy with deep cloning and filling the bottom level guys with instance methods then this puppy is going to get bloated or lag when there are several thousand kanji in memory at once.
Any help would be appreciated.
Drake

Usually by better design. Move methods that use the
getters inside the class that actually has the data....
As a basic rule of thumb:
The one who has the data is the one using it. If
another class needs that data, wonder what for and
consider moving that operation away from that class.
Or move from pull to push: instead of A getting
something from B, have B give it to A as a method
call argument.Thanks for the response. I think I see what you are saying.. in my case it is something like this.
Solution 1 (disfavored):
public class kanjiDrill{ // a chunk of Swing GUI or something
     public void runDrill(Vector kanjiEntries){
          KanjiEntry currentKanjiEntry = kanjiEntries.elementAt(0); // except really I will pick one randomly
          char theKanji = currentKanjiEntry.getKanji();
          String theReading = currentKanjiEntry.getReading();
          // build and show a flashcard based on theKanji and theReading
          // use a setter to change currentKanji's data based on whether the user answers correctly;
}Solution 2 (favored):
public class kanjiDrill{ // a chunk of Swing GUI or something
     public void runDrill(Vector kanjiEntries){
          KanjiEntry currentKanjiEntry = kanjiEntries.elementAt(0); // except really I will pick one randomly
          currentKanji.buildAndShowFlashcard(); // method includes updating stats
}I can definitely see the advantages to this, but two potential reasons to think hard about it occur to me right away. First, if this process is carried out to a sufficient extreme the objects that hold my data end up sucking in all the functionality of my program and my objects stop resembling natural concepts.
In your shopping example, say you want to generate price tags for the items. The price tags can be generated with ONLY the raw price, because we do not want the VAT on them. They are simple GIF graphics that have the price printed on a an irregular polygon. Should all that graphics generating code really go into the item objects, or should we just get the price out of the object with a simple getter method and then make the tags?
My second concern is that the more instance methods I put into my bottom level data objects the bigger they get, and I intend to have thousands of these things in memory. Is there a balance to strike at some point?
It's not really a setter. Outsiders are not setting
the items price - it's rather updating its own price
given an argument. This is exactly how it should be,
see my above point. A breach of encapsulation would
be: another object gets the item price, re-calculates
it using a date it knows, and sets the price again.
You can see yourself that pushing the date into the
item's method is much beter than breaching
encapsulation and getting and setting the price.So the point is not "don't allow access to the members" (which after all you are still doing, albeit less directly) so much as "make sure that any functionality implicated in working with the members is handled within the object," right? Take your shopping example. Say we live in a country where there is no VAT and the app will never be used internationally. Then we would resort to a simple setter/getter scheme, right? Or is the answer that if the object really is pure data are almost so, then it should be turned into a standard java.util collection instead of a custom class?
Thanks for the help.
Drake

Help with Facebook and Social Media wigets (Was: How do I fix the three probs that...)

I am having problems with the facebook or social media widgets. I would like the link to send viewers to my facebook business page, but when testing it shows my pic and a 'switch' sign (see screen shot) and when I open the site the message is as the other screenshot, great, but I don't know where to find which 'asset' is the problem and why. Also why bother having child pages if the menu doesn't reflect that? I see that drop down menus are an issue, also with some other forum members.
Thanks for any help offered!, I think I have solved the first problem now but still would appreciate any help with the other 2!
For some reason the facebook widget now loads the correct page, and I give up about the drop down menu, hopefully this will be addressed in the next update of Muse??

Hello,
For the "asset" issue, try locating the asset in the assets panel. It should have an icon like this: http://jingsite.businesscatalyst.com/jing/2013-12-16_0917.png
For the child pages in the menus issue, go to the menu options (by clicking the small blue arrow in the right top corner of the menu), and then change the menu type to "All Pages" instead of "Top Level Pages".
Hope this helps.
Cheers
Parikshit

Help with N8 and Adobe Premiere?

Hi, I am using Adobe Premiere Pro CS4 v4.1.0.
I recently got a Nokia N8 and am now trying to edit the video recordings, but am having some problems.
The phone records at 25fps 1280x720 using H.264 MPEG-4 codec, with sound in Stereo 130kbps 48 kHz.
When I create a project and load the .mp4 file into it, the first problem I see is that it reads it as 500fps and the video is only a second or 2 long.
I then interpret the footage to the correct 25fps, and the video then works fine. However, the sound seems to not be there.
I've noticed that due to Premiere interpreting it as 500fps, it thus only plays the first second or two of the sound when left as 500fps and plays all the video in that second or two, and thus when changing to the correct 25fps, it is therefore only the two seconds playing over the entire minute of video.
I also tried changing the file into other formats. The only other one that kind of worked was .mov. It allowed the sound to work perfectly, the video loaded at correct frames, however, when playing the video on premiere, it then showed black screen for most of the clip.
Have tried to find out about this online and installed a couple different codec packs and media players, but nothing helped with this problem in Adobe Premiere. However, the clip played fine in the media players, such as RealPlayer.
If anyone has any advice on this, it would be appreciated. I would prefer to fix this issue correctly rather than have to manually interpret or transcode the footage each time I want to edit it.
Btw, I also posted this question on a forum with Nokia N8 Users, and others also tried it out and had same or similar issues. They also tried on CS5 and it still didn't work.
*UPDATE* I just tested again to change the file from .mp4 to .mov by simply renaming it, and this time it loaded perfectly into Premiere. However, I have to do this on my XP computer, as my Windows 7 doesn't change the format of file by simply renaming it. Hence, I would still like help with getting it to recognise the .mp4 correctly though in the first place, rather than having to rename my files each time on the XP computer.

Moshpit84 did you utilize the uninstallers located in Applications/Utilities/Adobe Installers to remove your installation of Premiere Pro? Also what version of the Adobe Application Manager are you currently using?

Help with Epson and HP All-In-One Drivers

I've been looking through the forums for a day and not really finding what I'm looking for, so I decided to post...
Running an AE-N for a Macbook, a Powermac, and a Powerbook.
I've got two printers...an Epson R200 photo printer and an HP PSC 1410 All-In-One printer/scanner. I'm not worried about the scanning so much as the actual printing, both wirelessly and wired. I have no problem adding the printers...they pop up effortlessly in the printer setup through bonjour. But once I actually try to print to them, they endlessly search for the printer ("Looking for printer Epson R200"). Didn't think this would be a problem because they were found so easily by the AE.
I've read all the iFelix stuff posted and granted, I haven't tried the GIMP method just yet, but the R200 at least should be printing right out of the box, correct?
The printers are plugged into a USB hub and I've got an external HD plugged in as well...no problems with it. Any help would be appreciated...
JDH

John Blanchard1 wrote:
Yes, but it's difficult to know what state the drivers are in after moving things over from Time Machine. Try deleting the /Library/Printers/hp folder and using Software Update to reinstall the current drivers. If that doesn't work, you can download the drivers here:
http://support.apple.com/kb/DL907
This is working. I had the same problem with Yosemite and found Hp drivers were not working properly.
No need to delete the HP folder in library- printers because there wasn't any directory.

Help with locating videocard on G4 900MHz Quicksilver

Hi all,
I'm trying to help a family member who lives far, far away, and is trying to add a monitor to her G4 900 MHz Quicksilver, OS 10.2.something. Can someone please tell me where that info is stored on OS10.2?
I got her to go to the System Profiler, but could not help her find anything on 'display' or 'graphics/displays'. I work on one of the new iMacs, with the intel processor and 10.4, and so can't help her locate this info.
Any help is muuch appreciated.
Thanks,
Sheila
Powerbook G3 Pismo Mac OS X (10.3.9)

Are you trying to add a second monitor and connect it to an existing video card or are you wanting to add a second video card to run another monitor?
We're trying to add a second monitor - or possibly a small tv screen - to the G4. I've been on the apple discussion boards, and feel a little comfy asking questions, but I know nothing about using a second monitor. The few discussions I've read here ask the basic question of what kind of video card does the mac have - which I have not been able to answer since I am not yet physically near the computer. So I've tried to walk my partner through on the telephone, to no avail.
According to the link you provided, this G4 has an NVIDIA GeForce4 MX card. If you can point me in the direction that explains what else I might need to hook up either a non-flat screen monitor (so that colors in film editing don't look like crap on tv) or a small tv, I'd be most grateful. If not, I'll keep looking.
Thanks.
Powerbook G3 Pismo Mac OS X (10.3.9)
Powerbook G3 Pismo Mac OS X (10.3.9)

Using FIND MY IPHONE to help with locating MH370 casualties?

OK this may seem really silly (ok it definitely is) OR has already been done or not I don't know I just thought it was a pretty decent, simple idea that may or may not be of any help with the missing plane/people of the MH370. Icloud's Find My Iphone app has been of great use to me in tracking my phone, I'm sure it could be used in someway to see if they could locate the last known surroundings of any of the passengers. I'm a little obsessed with the whole story and my heart goes out to everyone involved in it but does anyone think this could work?

Only if the phone is switched on and connected to a network. Hard to imagine how this can happen if (a) the plane is under water or (b) has crashed/crash landed in a remote place such as a jungle or desert or mountains (c) if crashed likelihood is small items such as an iphone may well have been smashed/destroyed.
There's also the possibility the plane itself has some electronic device such as a transponder which would help in locating it. In all likelihood this too may have been destroyed.
You could have thought of this yourself prior to posting.

Archive applet. Help with adding files to archive, then show.

I need help with this applet: http://pastebin.com/589064
The user is supposed to add, remove and open archives with text in it.
My problem is now the highlited area in the code (the lines with the @@'s).
This button should list all files i have added to the archive, however when i press the button, i only get a numberlisting. eg, if i have added 4 files to the archive I get: 0123
However I want the Joptionpane to show a listing of the files in the archive.
When I press "open" i can choose a file, press add, then open a new file, press add, and then when i click show archive, the filenames of the two files i added, should list through a Joptionpane..as you can see, i've tried, but i'm very unfamiliar with this.

OK..i've done it
check out http://pastebin.com/589268
however, now i'd like to change the code, so that if i try to add to files with the same filename, the applet should show an error message..
How do i do that, please? :-)

Help with Mathscipt and for loop

I have a code in Mathscript/matlab and I need to output the array out. One option is my first code,the other option is using a for loop, but I am only getting the last ouput out. I need to get the whole output out.
Any help.
Thanks
Solved!
Go to Solution.
Attachments:
Help with Mathscript_for loop.vi ‏115 KB
Help with Mathscript_for loop2.vi ‏84 KB

Here's how it should look like.
Message Edited by altenbach on 10-30-2008 05:12 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
MathscriptInFOR.png ‏15 KB

Help with locating and moving archives

Similar Messages

Maybe you are looking for