Help with Locked files? Need help asap

When I tried to open a file in DW8 today I got this message:
File.html is a locked file and can be viewed but not changed.
What would you like to do with this file?
(buttons) Cancel View
How did this happen and how can I undo this?
Thanks-
Anne

If you had to use FINDER to unlock them, then it wouldn't
have been anything
in DW. That's fairly typical for files that have been copied
from a CD,
though.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Melliska" <[email protected]> wrote in
message
news:g14j8l$onj$[email protected]..
>I did not copy it from a CD. I m not sure how this
happened, but the entire
> site was locked and I had to unlock each file through
the finder on (Mac).
> I must have enabled and disabled the check-in/check-out
at some point in
> order
> for this to happen. I don't know what else would have
caused this.
> But they are unlocked now. Thanks for your response.
>

Similar Messages

Help with locked files???

Hello everyone!!! i have a question, i have a mini mac with the MacOS 10.3 the thing is that i just saved some files from my old pc to my external hard drive, and when i plugged it into my mini mac everything looks good, so decided to work with photoshop cs2 with some of the files that i have in my external hard drive, but when i try to save my work as normal i get an error message that says "cannot save cuz the file is locked, please go to get info and unlock the file" so this is my issue, what i have to do to unlock the files?? pleae help?

All the references I can find about NTFS 3g require Tiger or later. Maybe an early release for Panther exists but you'll have to search.
You can certain reformat to FAT as Niel suggests but if you're just going to be using this with a Mac I'd format it to Mac extended. This will get around the file size limit, and more importantly you can use Disk Utility to repair the drive should you have problems with it. DU won't repair FAT.

Urgent Help With Connections File Needed Please

Hello All!
I am getting the following error when I attempt to test my
live site. I am testing database connectivity within my site that
is hosted by GoDaddy. All pages are ASP and the database is stored
in the root directory in GoDaddy's folder called "access_db". The
folder has read/write access.
Here is the error:
Microsoft JET Database Engine error '80040e4d'
Cannot start your application. The workgroup information file
is missing or opened exclusively by another user.
/sitename/requestquote/index.asp, line 130
Here is the code from the connections file:
<%
' FileName="Connection_ado_conn_string.htm"
' Type="ADO"
' DesigntimeType="ADO"
' HTTP="false"
' Catalog=""
' Schema=""
Dim MM_connNAME_STRING
MM_connNAME_STRING =
"Provider=Microsoft.Jet.OLEDB.4.0;DataSource=username\access_db\filename.mdb;UserId=usern ame;Password=password;"
%>
The error above refrences "/sitename/requestquote/index.asp,
line 130", and here is the code:
rs_quote.ActiveConnection = MM_connNAME_STRING
Please help.
Thanks - Matt

Sorry Tim? This is Dave. Did you read what said? I'm not
Matt.
Dave
"TC2112" <[email protected]> wrote in message
news:[email protected]...
> It could be, you'd have to check in the control panel to
make sure
> permissions are set to read and write.
> Have you tried changing the path in your connection
string to the GoDaddy
> path and uploading the file?
> The info I posted tells you how to find out what the
path on GoDaddy is.
>
> Tim
>
>
> "Baxter" <baxter(RemoveThe :-)@gtlakes.com> wrote
in message
> news:[email protected]...
> > Tim,
> > Very good reply! I have no experience with GD other
than the complaints
I
> > have read here about connections to databases etc.
I think that if his
> > connection test is ok that it has to be a
permissions issue? What do you
> > think?
> > Dave
> > "TC2112" <[email protected]> wrote in message
> > news:[email protected]...
> >> Hello,
> >>
> >> Sorry if some of this is repetitive in respect
to what others have
> >> advised
> >> in this thread.
> >> It's an answer I gave someone with similar
problems a while ago.
> >> It does answer your question about the
successful path on your local
> > server
> >> being different than the path on GDs server.
> >> There are also instructions on how to find the
path on GD's server if
> > needed
> >> for DNS-Less connection.
> >>
> >>
> >> Option 1:
> >> You can try using a map path function like this
in your connection
> >> string:
> >> access_db is the folder the database is in and
mydatabase.mdb is the
> > access
> >> file.
> >> Substitute your names.
> >>
> >> STRING = "Provider=Microsoft.Jet.OLEDB.4.0;Data
Source=" &
> >> Server.MapPath("access_db") &
"\mydatabase.mdb;User Id=admin;Password="
> >>
> >> -or-
> >>
> >> Option 2:
> >> You could try an OLEDB DSN-Less connection
instead of using a DSN. It's
> > not
> >> hard to do.
> >>
> >> Step 1 is to figure out the location of the
root directory on the
host's
> >> server..That's very easy to do yourself.
> >>
> >> Just make an asp page (I named mine
"findit.asp"), and put the
following
> >> code between the <body> tags, like so:
> >> <body>
> >> <%
> >> Response.Write("The location of this page
is: ")
> >>
Response.Write(Request.ServerVariables("PATH_TRANSLATED") &
" ")
> >> Response.Write("The location of my root
directory is: ")
> >> Response.Write(Server.MapPath("\"))
> >> Response.Write Path
> >> %>
> >> </body>
> >>
> >>
> >> Upload it to the same location as your site's
home page.
> >> Once your new asp page is uploaded, just
navigate to that page in your
> >> browser.
> >>
> >> For a site on GD the "findit.asp" page displays
something like this:
> >>
> >> The location of this page is:
> >> d:\hosting\mysite\findit.asp
> >> The location of my root directory is:
> >> d:\hosting\mysite
> >>
> >> Now that you know the root directory location
on their server, you can
> >> figure out the path to your database.
> >> Let's say that the folder your database is in
is named _private, and
it
> >> happens to be in the root
> >> directory along with your home page.
> >>
> >> Next, just add the database folder name
(_private) and the database
> >> inside's name (mydatabase.mdb) to the root
directory location:
> >>
> >> d:hosting\mysite\_private\mydatabase.mdb
> >>
> >> That's your Data Source path.
> >>
> >> The connection string would look something like
this:
> >>
> >> = "Provider=Microsoft.Jet.OLEDB.4.0;Data
> >>
Source=d:hosting\mysite\_private\mydatabase.mdb;User
ID=;Password=;"
> >>
> >> (the code above may appear wrapped (two lines)
in the forum/ng but it's
> > one
> >> line with no return within)
> >>
> >> IMPORTANT: If you are using a local testing
server, make a copy of your
> >> connection asp page as a backup.
> >> The reason? The connection information you are
going to put in this
file
> >> will only work on the host's server.
> >> Once you upload the new connection.asp page
with the changes for the
> >> host,
> >> you'll need to change your local copy back to
your local connection so
it
> >> will work on
> >> your local testing server.
> >>
> >> Upload to server.
> >>
> >> Please note: From now on, when you upload (or
"put" if you're using DW)
> >> files that refer to your connection asp page
you're going to get a
> >> warning
> >> that your connection asp on the host is
different than your local copy.
> >> Always say "No" to updating it, or you'll
replace the GD DSN-Less
> > connection
> >> with your local one.
> >>
> >>
> >> Did you set the appropriate read/write
permissions on the
> > directory(folder)
> >> your database is in?
> >> You can do that in GD's control panel.
Hosting> Select your site >
Manage
> > to
> >> open it.
> >>
> >> I hope this helps.
> >>
> >> For what it's worth, I only use GD for domain
names now.
> >> I had numerous problems with some sites hosted
there, switched them to
> >> HostMySite and haven't had any.
> >>
> >> Take care,
> >> Tim
> >>
> >>
> >>
> >>
> >>
> >> "Baxter" <baxter(RemoveThe
:-)@gtlakes.com> wrote in message
> >> news:[email protected]...
> >> > Baxter - I get "Connection was Made
Successfully" if connection to
the
> >> > database was made Successfully not sure
what's going on here? When
you
> >> > look
> >> > at your site files in Dreamwerer on the
server is there a folder
named
> >> > access_db? If so is your data base in that
folder? The database needs
> >> > permissions set to read and write to that
file. Have you checked
> >> > permissions
> >> > on the site? does GD give you a control
panel so that you can set the
> >> > permissions your self? I have never used
GD but have seen where
people
> >> > have
> >> > had lots of problems with them when using
a scripting language. I
don't
> >> > know
> >> > what else it could be at this point.
> >> > Dave
> >> > "mtrueblood"
<[email protected]> wrote in message
> >> > news:[email protected]...
> >> >> Baxter - I get "Connection was Made
Successfully" with the
credentials
> >> >> you
> >> > gave
> >> >> me. My site works just fine on my
local machine with
> > access_trueblood.dsn
> >> > (it
> >> >> also worked with the dsn I initally
created for the site). All pages
> >> > display
> >> >> and I get no errors. I think where the
issue may be, now I am
guessing
> >> > here, is
> >> >> that my connection refrences a
database located in the folder
> >> >>
C:\Users\Administrator\Websites\Sitename\access_db, but once I
upload
> > my
> >> > site,
> >> >> the database still sits in access_db,
but the root folder possibly
has
> >> > changed
> >> >> (maybe causing the connection to
fail).
> >> >>
> >> >> Dooza - I don't understand how I can
use "c:myDsnFile.dsn", when
once
> > I
> >> > upload
> >> >> my site, "c:myDsnFile.dsn" would then
not be the location of my dsn.
> >> >> "c:myDsnFile.dsn" refrences a file on
my computer. I am using an
> >> >> online
> >> > hosting
> >> >> company. Am I not understanding you
correctly? See note above. I did
> > use
> >> > your
> >> >> information and got the following
browser error:
> >> >>
> >> >> Microsoft OLE DB Provider for ODBC
Drivers error '80004005'
> >> >> General error: Invalid file dsn ''
> >> >> /sitename/contactus/index.asp, line
130
> >> >>
> >> >> line 130 -
rs_contactus.ActiveConnection = MM_connTrueblood_STRING
> >> >>
> >> >> I am researching on how to do a
dsn-less connection, unless I can
get
> >> > this
> >> >> figured out.
> >> >>
> >> >> Thanks - Matt
> >> >>
> >> >
> >> >
> >>
> >>
> >
> >
>
>

Can some help with CR2 files ,Ican`t see CR2 files in adobe bridge

can some help with CR2 files ,I can`t see CR2 files in adobe bridge when I open Adobe Photoshop cs5- help- about plugins- no camera raw plugins. When i go Edit- preference and click on camera raw shows message that Adobe camera raw plugin cannot be found

That's strage. Seems that the Camera Raw.8bi file has been moved to different location or has gone corrupt. By any chance did you try to move the camera raw plugin to a custom location?
Go To "C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS5\File Formats" and look for Camera Raw.8bi file.
If you have that file there, try to download the updated camera raw plugin from the below location.
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5371&fileID=5001
In case you ae not able to locate the Camera Raw.8bi file on the above location, then i think you need to re-install PS CS5.
[Moving the discussion to Photoshop General Discussions Forum]

Help with add file name problem with Photoshop CS4

Frustrating problem: Help with add file name problem with Photoshop CS4. What happens is this. When I am in PS CS4 or CS3 and run the following script it runs fine. When I am in Bridge and go to tools/photoshop/batch and run the same script it runs until it wants interaction with preference.rulerunits. How do I get it to quit doing this so I can run in batch mode? Any help is appreciated. HLower
Script follows:
// this script is another variation of the script addTimeStamp.js that is installed with PS7
//Check if a document is open
if ( documents.length > 0 )
var originalRulerUnits = preferences.rulerUnits;
preferences.rulerUnits = Units.INCHES;
try
var docRef = activeDocument;
// Create a text layer at the front
var myLayerRef = docRef.artLayers.add();
myLayerRef.kind = LayerKind.TEXT;
myLayerRef.name = "Filename";
var myTextRef = myLayerRef.textItem;
//Set your parameters below this line
//If you wish to show the file extension, change the n to y in the line below, if not use n.
var ShowExtension = "n";
// Insert any text to appear before the filename, such as your name and copyright info between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextBefore = "Lower© ";
// Insert any text to appear after the filename between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextAfter = " ";
// Set font size in Points
myTextRef.size = 10;
//Set font - use GetFontName.jsx to get exact name
myTextRef.font = "Arial";
//Set text colour in RGB values
var newColor = new SolidColor();
newColor.rgb.red = 0;
newColor.rgb.green = 0;
newColor.rgb.blue = 0;
myTextRef.color = newColor;
// Set the position of the text - percentages from left first, then from top.
myTextRef.position = new Array( 10, 99);
// Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
myLayerRef.blendMode = BlendMode.NORMAL;
// select opacity in percentage
myLayerRef.opacity = 100;
// The following code strips the extension and writes tha text layer. fname = file name only
di=(docRef.name).indexOf(".");
fname = (docRef.name).substr(0, di);
//use extension if set
if ( ShowExtension == "y" )
fname = docRef.name
myTextRef.contents = TextBefore + " " + fname + " " + TextAfter;
catch( e )
// An error occurred. Restore ruler units, then propagate the error back
// to the user
preferences.rulerUnits = originalRulerUnits;
throw e;
// Everything went Ok. Restore ruler units
preferences.rulerUnits = originalRulerUnits;
else
alert( "You must have a document open to add the filename!" );

you might want to try the scripting forum howard:
http://www.adobeforums.com/webx?13@@.ef7f2cb

Serious Issue with Linkage..Need help ASAP!

OK, I have big deadline for Monday and I can't figure this
out. I have a bunch of movieclips that are set up with linkage for
actionscript and set to export in first frame. Everything was fine
and dandy for a week. Now all of a sudden Flash hangs when I try to
export the swf. If I turn off the export in first frame everything
is fine. The problem then is that my move clips aren't available
for the attachmovie call. What I don't understand is why it was
fine, then all of a sudden this happened for no apparent reason.
Has anyone got a workaround or solution for this? I need help with
this ASAP. Thanks.
--Paul

Sadly nothing you can do. The file must be corrupted.
sometimes files that need saving corrupt themselves (product of
voltage variations or some other physical things) making some
objects "BAD", maybe you can save your work if you determine what
is the only object that is corrupting all the file and delete and
and redraw it.

I need help with viewing files from the external hard drive on Mac

I own a 2010 mac pro 13' and using OS X 10.9.2(current version). The issue that I am in need of help is with my external hard drive.
I am a photographer so It's safe and convinent to store pictures in my external hard drive.
I have 1TB external hard drive and I've been using for about a year and never dropped it or didn't do any thing to harm the hardware.
Today as always I connected the ext-hard drive to my mac and click on the icon.
All of my pictures and files are gone accept one folder that has program.
So I pulled up the external hard drive's info it says the date is still there, but somehow i can not view them in the finder.
I really need help how to fix this issue!

you have a notebook, there is a different forum.
redundancy for files AND backups, and even cloud services
so a reboot with shift key and verify? Recovery mode
but two or more drives.
a backup, a new data drive, a drive for recovery using Data Rescue III
A drive can fail and usually not if, only when
and is it bus powered or not

Need help with connecting file inputs to arrays

In this assignment I have a program that will do the following: display a list of names inputed by the user in reverse order, display any names that begin with M or m, and display any names with 5 or more letters. This is all done with arrays.
That was the fun part. The next part requires me to take the names from a Notepad file, them through the arrays and then output them to a second Notepad file.
Here is the original program: (view in full screen so that the code doesn't get jumbled)
import java.io.*; //Imports the Java library
class progB //Defines class
 public static void main (String[] arguments) throws IOException
 BufferedReader keyboard; //<-
 InputStreamReader reader; // Allows the program to
 reader = new InputStreamReader (System.in); // read the the keyboard
 keyboard = new BufferedReader (reader); //<-
 String name; //Assigns the name variable which will be parsed into...
 int newnames; //...the integer variable for the amount of names.
 int order = 0; //The integer variable that will be used to set the array size
 String[] array; //Dynamic array (empty)
 System.out.println (" How many names do you want to input?"); //This will get the number that will later define the array
 name = keyboard.readLine ();
 newnames = Integer.parseInt (name); // Converts the String into the Integer variable
 array = new String [newnames]; //This defines the size of the array
 DataInput Imp = new DataInputStream (System.in); //Allows data to be input into the array
 String temp;
 int length; //Defines the length of the array for a loop later on
 for (order = 0 ; order < newnames ; order++) //<-
 { // Takes the inputed names and
 System.out.println (" Please input name "); // gives them a number according to
 temp = keyboard.readLine (); // the order they were inputed in
 array [order] = temp; //<-
 for (order = newnames - 1 ; order >= 0 ; order--) //<-
 { // Outputs the names in the reverse
 System.out.print (" \n "); // order that they were inputed
 System.out.println (" Name " + order + " is " + array [order]); //<-
 for (order = 0 ; order < newnames ; order++) //<-
 if (array [order].startsWith ("M") || array [order].startsWith ("m")) // Finds and outputs any and all
 { // names that begin with M or m
 System.out.print (" \n "); //
 System.out.println (array [order] + (" starts with M or m")); //
 } //<-
 for (order = 0 ; order < newnames ; order++) //<-
 length = array [order].length (); //
 if (length >= 5) // Finds and outputs names
 { // with 5 or more letters
 System.out.print (" \n "); //
 System.out.println ("Name " + array [order] + " have 5 or more letters "); //<-
}The notepad file contains the following names:
jim
laruie
tim
timothy
manny
joseph
matty
amanda
I have tried various methods but the one thing that really gets me is the fact that i can't find a way to connect the names to the arrays. Opening the file with FileInputStream is easy enough but using the names and then outputing them is quite hard. (unless i'm thinking too hard and there really is a simple method)

By "connect", do you just mean you want to put the names into an array?
array[0] = "jim"
array[1] = "laruie"
and so on?
That shouldn't be difficult at all, provided you know how to open a file for reading, and how to read a line of text from it. You can just read the line of text, put it in the array position you want, until the file is exhausted. Then open a file for writing, loop through the array, and write a line.
What part of all that do you need help with?

Error when extracting data with extractor 2lis_04_matnr - NEED HELP ASAP !!

Hi experts!
Got an error when extracting data with extractor 2lis_04_matnr.
System says (short dump):
DUMP TEXT START----
Runtime error: CONNE_IMPORT_WRONG_COMP_TYPE
Exception: CX_SY_IMPORT_MISMATCH_ERROR
Error when attempting to import object "MC04P_0MAT_TAB".
The current ABAP program "SAPLMCEX" had to be terminated because one of the statements could not be executed. This is probably due to an error in the ABAP program. When attempting to import data, it was discovered that the data type of the stored data was not the same as that specified in the program.
An exception occurred. This exception is dealt with in more detail below. The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR', was neither caught nor passed along using a RAISING clause, in the procedure "MCEX_BW_LO_API" "(FUNCTION)".
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is: When importing the object "MC04P_0MAT_TAB", the component no. 5 in the dataset has a different type from the corresponding component of the target object in the program "SAPLMCEX". The data type is "D" in the dataset, but "C" in the program.
DUMP TEXT END----
Please, can someone explain me how to solve it?
Really need help ASAP!
Thanks in advance,
Jaume
Message was edited by:
 Jaume Saumell
Message was edited by:
 Jaume Saumell

Hi,
Check this note: 328181
So you need to delete entries in SM13/LBWQ for application and also detup table content.
And then refill teh set up table.
If you are in production clear the entries by running collective run no of times for this application 04.
With rgds,
Anil Kumar Sharma .P

Need Help with .nnlp File.............A.S.A.P.

I'm having a problem also with my JNLP file. I have downloaded the program onto one computer and that computer is using j2re1.4.2_04
The other computers I believe are all running j2re 1.4.2_05
I'm not sure if that's make a difference, but on the computer with j2re 1.4.2_05 when going to the site where the .jnlp file is located, the application comes up and says Starting Application. After it gets to that screen it just stays there. I really need help with this as soon as possible.
Here is my .jnlp file listed below:
<?xml version="1.0" encoding="utf-8"?>
<jnlp
spec="1.0+"
codebase="http://www.appliedsolutions.com/placewiz"
href="Placewiz.jnlp">
<information>
 <title>Placement Wizard 4.0</title>
 <vendor>Applied Solutions, Inc.</vendor>
 <homepage href="index.html"/>
 <description>Placement Wizard 4.0</description>
 <description kind="short">Short description goes here.</description>
 <offline-allowed/>
</information>
<resources>
 <j2se version="1.4+"/>
 <j2se version="1.3+"/>
 <j2se version="1.5+"/>
 <jar href="Placewiz.jar"/>
</resources>
<security>
 <all-permissions/>
</security>
<application-desc main-class="com/asisoftware/placewiz/loader/Exec">
</jnlp>

This was due to a change in 1.4.2_05
the main class attribute
main-class="com/asisoftware/placewiz/loader/Exec">is wrong - it should be:
main-class="com.asisoftware.placewiz.loader.Exec">this didnt seem to mater before 1.4.2_05, but some change in java since then caused this bad class specification to stop loading.
/Andy

Need help with fla.file

Hi!
I'm always having trouble with a fla.file in cs3 professional. Every time i try to reopen the file in flash i get this:
failed to open document/users.desktop/jason/social.fla
pls help reopen this file
jay

create a new directory and move your fla there and try and open. if that fails, change the file's name and try and reopen. if that fails and you created the fla, it's probably corrupt.

Need help with copying files onto external drive

I need help! Trying to copy downloaded movie files from Vuze (which have downloaded successfully) and copy onto external hard drive to view them but it wont let me copy over to the external device. Any ideas how to fix this please???

Can you explain the steps you used, and the error message (or symptom), that says the copy did not work?

Need help with batch file for javac.exe and java.exe

I have this in my batch file:
c:\jdk1.3.1_05\bin\javac
What symbol do I need to be able to run this from cprompt with any file following it

Thanks could remember that for nothing

Help with Reconnecting Files

Over this past weekend I was moving, via Relocate Masters, large numbers of images from managed status on my MacBook Pro to referenced status on an external drive (an Air Disk, to be precise). This had gone fine for thousands of images, but Sunday night I returned to the computer to find that it was completely locked up in mid-Relocate, and seemed to have been locked up for a while. I'm not sure what happened, but it seemed bad -- I couldn't get to the Force Quit dialog, or anywhere else. I powered down by holding in the power button.
Upon resurrecting things, Aperture would not open the library. Long story shorter, I rebuilt the database and was then able to see the library contents again. But then I noticed that many files were "offline." Digging further, and using the Manage Referenced Files box, I discovered that some 3500 files need to be reconnected.
The Reconnect All button did a little bit of magic for me, but now I've gotten to a point where using Reconnect All only reconnects one file at a time. I was renaming files as I Relocated Masters, and my fear is that this is what has caused the disconnect. *So first,* can anyone tell me that this is what has caused the problem (the problem being my apparent need to now reconnect 3400 files, one-by-one)?
*Second, and more importantly to me, do I have any recourse beyond reconnecting one-by-one?* Again, the problem seems to me to be that the library file expects a file named image.jpg (or whatever), because the change of the file name to greatimage.jpg that occurred during Relocation did not get written to the library file.
Many thanks for all help and suggestions.

Homme dArs wrote:
I hope someone else can join in with a definitive answer to your problem, but I don't believe you will be happy using the configuration you are attempting to set up.
Having Aperture access your images via wireless is going to be very very slow, and any connection problems will be very frustrating. I have even abandoned the idea of using wireless backup of image files because it so slow.
Perhaps someone can help with your immediate problem, but I would strongly suggest you find a way to store your referenced files locally (a firewire drive would be ideal).
Thanks. I certainly appreciate your thought, and before trying it myself, my instinct was the same as yours. That said, until the present problem cropped up, I have to say it has been quite a good solution. My network is 802.11n, and I've noticed no real lag in accessing the files or otherwise using Aperture with a library stored as this is.
But yes, I hope someone is able to help me get these 3400-some files reconnected short of one-by-one.
Thank you for your comments.

Can you help with rematching file names

After a computer crash needed to reload my library. When doing this I accidently clicked the option to add track numbers to song names.
Later I was able to locate my iTunes XML from my old PC, however many of the songs (5000 out of 6000) no don't match because the original song name has been changed since my stupid error caused the files names to get the song number in front of them.
Anybody have any tips for matching the filenames back up. In my original library some files had track numbers in front and some did not. How can I match them back up. I'm comfortable programming and modifying the iTunes XML but I can't figure out a good way to list out the contents of my hard drive to do the actual matching.
Tony

Because this forum software is so absolutely USELESS now, you don't get to see the whole of the question in this view. In the other (non-list) view it says:
"can you help with a technical problem with the stereo imagery option ? it won't take out lead vocal in a stereo mp3"
And the answer is that if you can't isolate the vocal in the stereo field, or it is one of these odd ones where it's used inverted polarity in different parts of the stereo signal for the same vocal, then you won't be able to. But without a sample, it's impossible to tell. If you can post a link to one, that might help. It has to be external to this site though - Adobe in their infinite wisdom don't allow the posting of audio files on their audio U2U forum. Helpful, that, isn't it?

Help with Locked files? Need help asap

Similar Messages

Maybe you are looking for