Help with LOG files
hii guys, I have a doubt like ...*where logs are stored before /var filesystem is mounted on solaris*
Its not, its stored in the kernel memory, and then read by the syslog-daemon through /dev/log when its initiated. Hence its only in memory before syslogd is started.
For one thing, during the initial boot the filesystems are either not mounted or mounted read-only, which means that the messages can't be written down anywhere until the filesystems are mounted properly anyway.
.7/M.
Similar Messages
-
Can some help with CR2 files ,Ican`t see CR2 files in adobe bridge
can some help with CR2 files ,I can`t see CR2 files in adobe bridge when I open Adobe Photoshop cs5- help- about plugins- no camera raw plugins. When i go Edit- preference and click on camera raw shows message that Adobe camera raw plugin cannot be found
That's strage. Seems that the Camera Raw.8bi file has been moved to different location or has gone corrupt. By any chance did you try to move the camera raw plugin to a custom location?
Go To "C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS5\File Formats" and look for Camera Raw.8bi file.
If you have that file there, try to download the updated camera raw plugin from the below location.
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5371&fileID=5001
In case you ae not able to locate the Camera Raw.8bi file on the above location, then i think you need to re-install PS CS5.
[Moving the discussion to Photoshop General Discussions Forum] -
Help with add file name problem with Photoshop CS4
Frustrating problem: Help with add file name problem with Photoshop CS4. What happens is this. When I am in PS CS4 or CS3 and run the following script it runs fine. When I am in Bridge and go to tools/photoshop/batch and run the same script it runs until it wants interaction with preference.rulerunits. How do I get it to quit doing this so I can run in batch mode? Any help is appreciated. HLower
Script follows:
// this script is another variation of the script addTimeStamp.js that is installed with PS7
//Check if a document is open
if ( documents.length > 0 )
var originalRulerUnits = preferences.rulerUnits;
preferences.rulerUnits = Units.INCHES;
try
var docRef = activeDocument;
// Create a text layer at the front
var myLayerRef = docRef.artLayers.add();
myLayerRef.kind = LayerKind.TEXT;
myLayerRef.name = "Filename";
var myTextRef = myLayerRef.textItem;
//Set your parameters below this line
//If you wish to show the file extension, change the n to y in the line below, if not use n.
var ShowExtension = "n";
// Insert any text to appear before the filename, such as your name and copyright info between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextBefore = "Lower© ";
// Insert any text to appear after the filename between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextAfter = " ";
// Set font size in Points
myTextRef.size = 10;
//Set font - use GetFontName.jsx to get exact name
myTextRef.font = "Arial";
//Set text colour in RGB values
var newColor = new SolidColor();
newColor.rgb.red = 0;
newColor.rgb.green = 0;
newColor.rgb.blue = 0;
myTextRef.color = newColor;
// Set the position of the text - percentages from left first, then from top.
myTextRef.position = new Array( 10, 99);
// Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
myLayerRef.blendMode = BlendMode.NORMAL;
// select opacity in percentage
myLayerRef.opacity = 100;
// The following code strips the extension and writes tha text layer. fname = file name only
di=(docRef.name).indexOf(".");
fname = (docRef.name).substr(0, di);
//use extension if set
if ( ShowExtension == "y" )
fname = docRef.name
myTextRef.contents = TextBefore + " " + fname + " " + TextAfter;
catch( e )
// An error occurred. Restore ruler units, then propagate the error back
// to the user
preferences.rulerUnits = originalRulerUnits;
throw e;
// Everything went Ok. Restore ruler units
preferences.rulerUnits = originalRulerUnits;
else
alert( "You must have a document open to add the filename!" );you might want to try the scripting forum howard:
http://www.adobeforums.com/webx?13@@.ef7f2cb -
I'm having problems copying data across my network to my new mac mini and i'm looking for some help with how to resolve this issue.
I'm using "Connect to Server' to connect via SMB to a Vista x64 machine that has the files I need to copy. I'm mounting the share as the user that has permissions to the files on the vista client. The connection is fine, but when I start the copy process, I receive an error message about not having the appropriate permissions to copy files and then the entire copy process fails. Here is the exact error message:
Copy
The operation cannot be completed because you do not have sufficient privileges for some of the items.
OK
From the vista machine I have logged in as the same user and I have taken ownership of ALL of the files and folders I'm trying to copy. I also made sure that the folder is shared with EVERYONE having full access (not something I would normally do, but figured it might help this situation). The vista machine is in a workgroup if that makes a difference.
Question 1: how can I do this via command line so that instead of stopping the entire file copy it skips the ones it can't copy and copies the rest of them?
With hundreds of subfolders and thousands of files, I have no idea which ones it is failing to copy making this process quite painful.
I'm also stuck on another basic issue - when I originally connected to the share, I told the OSX machine to remember the password. If I want to reconnect to the share using a different username and different password, how do I get OSX to reprompt me for this information?
HelpYou are probably better off using
ditto
In a terminal
man ditto
and read the description and instructions.
Yes, sadly, many copy process when the fail at a file abort the rest of the process. Windows does this as well. -
hello everybody.
I am using java.util.logging package to create log files.
I have to generate log files and append to the file based on the condition.
When i am writing message to single log file it it updated to all the log files.
Code
==========================
//To create error_0.log file
import java.util.logging.FileHandler;
import java.util.logging.Level;
import java.util.logging.Logger;
import java.util.logging.SimpleFormatter;
public class NetLogger
private String pattern = "./log/error_%g.log";
private int limit = 1000000; // 1 Mb
private int numLogFiles = 300;
private FileHandler fh = null;
private Logger logger =null;
public NetLogger()
try
fh = new FileHandler(pattern, limit, numLogFiles);
fh.setFormatter(new SimpleFormatter());
logger = Logger.getLogger("com.netenforcers");
logger.setUseParentHandlers(false);
logger.addHandler(fh);
//logger.setLevel(Level.ALL);
catch(Exception ex)
ex.printStackTrace();
public Logger getLogger()
return this.logger;
=======
// To create whoIs_0.log
import java.util.logging.FileHandler;
import java.util.logging.Level;
import java.util.logging.Logger;
import java.util.logging.SimpleFormatter;
public class WhoIsLogger
private String pattern = "./log/whoIs_%g.log";
private int limit = 1000000; // 1 Mb
private int numLogFiles = 300;
private FileHandler fh = null;
private Logger logger =null;
public WhoIsLogger()
try
fh = new FileHandler(pattern, limit, numLogFiles);
fh.setFormatter(new SimpleFormatter());
logger = Logger.getLogger("com.netenforcers");
logger.setUseParentHandlers(false);
logger.addHandler(fh);
//logger.setLevel(Level.ALL);
catch(Exception ex)
ex.printStackTrace();
public Logger getLogger()
return this.logger;
========
I am calling thses two loggers using
if(true)
NetLogger logger = new NetLogger();
logger.getLogger.info("Hi to be written to error log");
else
WhoIsLogger whoislogger = new WhoIsLogger ();
whoislogger.getLogger.info("Hi to be written to whois log");
=========
But the two log files arre updating with two messages.
Pls help me.
thnx,
rajhello everybody.
I am using java.util.logging package to create log files.
I have to generate log files and append to the file based on the condition.
When i am writing message to single log file it it updated to all the log files.
Code
==========================
//To create error_0.log file
import java.util.logging.FileHandler;
import java.util.logging.Level;
import java.util.logging.Logger;
import java.util.logging.SimpleFormatter;
public class NetLogger
private String pattern = "./log/error_%g.log";
private int limit = 1000000; // 1 Mb
private int numLogFiles = 300;
private FileHandler fh = null;
private Logger logger =null;
public NetLogger()
try
fh = new FileHandler(pattern, limit, numLogFiles);
fh.setFormatter(new SimpleFormatter());
logger = Logger.getLogger("com.netenforcers");
logger.setUseParentHandlers(false);
logger.addHandler(fh);
//logger.setLevel(Level.ALL);
catch(Exception ex)
ex.printStackTrace();
public Logger getLogger()
return this.logger;
=======
// To create whoIs_0.log
import java.util.logging.FileHandler;
import java.util.logging.Level;
import java.util.logging.Logger;
import java.util.logging.SimpleFormatter;
public class WhoIsLogger
private String pattern = "./log/whoIs_%g.log";
private int limit = 1000000; // 1 Mb
private int numLogFiles = 300;
private FileHandler fh = null;
private Logger logger =null;
public WhoIsLogger()
try
fh = new FileHandler(pattern, limit, numLogFiles);
fh.setFormatter(new SimpleFormatter());
logger = Logger.getLogger("com.netenforcers");
logger.setUseParentHandlers(false);
logger.addHandler(fh);
//logger.setLevel(Level.ALL);
catch(Exception ex)
ex.printStackTrace();
public Logger getLogger()
return this.logger;
========
I am calling thses two loggers using
if(true)
NetLogger logger = new NetLogger();
logger.getLogger.info("Hi to be written to error log");
else
WhoIsLogger whoislogger = new WhoIsLogger ();
whoislogger.getLogger.info("Hi to be written to whois log");
=========
But the two log files arre updating with two messages.
Pls help me.
thnx,
raj -
"Kernel Panic" with log file: what could be the cause...?
Hi,
Today I had my 3th "kernel panic" if I'm right.
I have an IbookG4 1,42GHz.
I've already post my problem, with log, on a dutch Apple forum but the people don't know what the log means. The problem can't be new hardware (more memory) because I haven't installed more and new hardware except that I have an external Harddrive.
One people suggest that I reset my PRAM, NVRAM and PMU and control my HD. That I have done but if the problem is solved, I don't know.
What I was doing the last 2 times when a "kernel panic" occured: I was working with VectorDesigner. The last time, that program was the only one open. Is it possible that my laptop can't cope with that grafic program, the laptop gets overload and crashes?
Also, when I restart the laptop after the "kernel panic", the laptop ask to push on a button to send a paper to Apple, but if I do so It seems to do nothing. So has it send a paper, I don't know.
Below the log of the last 2 kernal when I was working with VectorDesigner. I hope that someone could read this log and understands it and know what the cause is of the kernel panic:
Thu Mar 27 17:43:51 2008
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x00000000B0015000 PC=0x0000000000976278
Latest crash info for cpu 0:
Exception state (sv=0x2EFAE000)
PC=0x00976278; MSR=0x00009030; DAR=0xB0015000; DSISR=0x40000000; LR=0x00976288; R1=0x0CF33A60; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00976288 0x0099DEC8 0x0099C7F0 0x0096C924 0x002EC884 0x0008CA28
0x00029234 0x000233F8 0x000ABEAC 0xFF4B2E30
Kernel loadable modules in backtrace (with dependencies):
com.apple.ATIRadeon9700(4.1.8)@0x963000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x877000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x89b000
Proceeding back via exception chain:
Exception state (sv=0x2EFAE000)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x2F0A6A00)
PC=0x9000B348; MSR=0x0200F030; DAR=0x53D3E010; DSISR=0x40000000; LR=0x9000B29C; R1=0xBFFF4B80; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
Proceeding back via exception chain:
Exception state (sv=0x2EFAE000)
PC=0x00976278; MSR=0x00009030; DAR=0xB0015000; DSISR=0x40000000; LR=0x00976288; R1=0x0CF33A60; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00976288 0x0099DEC8 0x0099C7F0 0x0096C924 0x002EC884 0x0008CA28
0x00029234 0x000233F8 0x000ABEAC 0xFF4B2E30
Kernel loadable modules in backtrace (with dependencies):
com.apple.ATIRadeon9700(4.1.8)@0x963000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x877000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x89b000
Exception state (sv=0x2F0A6A00)
PC=0x9000B348; MSR=0x0200F030; DAR=0x53D3E010; DSISR=0x40000000; LR=0x9000B29C; R1=0xBFFF4B80; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
Mon Apr 7 14:00:05 2008
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x00000000B0015000 PC=0x0000000000976278
Latest crash info for cpu 0:
Exception state (sv=0x212C2500)
PC=0x00976278; MSR=0x00009030; DAR=0xB0015000; DSISR=0x40000000; LR=0x00976288; R1=0x0CEA3A60; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00976288 0x0099DEC8 0x0099C7F0 0x0096C924 0x002EC884 0x0008CA28
0x00029234 0x000233F8 0x000ABEAC 0x00000FFF
Kernel loadable modules in backtrace (with dependencies):
com.apple.ATIRadeon9700(4.1.8)@0x963000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x877000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x89b000
Proceeding back via exception chain:
Exception state (sv=0x212C2500)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x21249C80)
PC=0x9000B348; MSR=0x0200F030; DAR=0x06CB4240; DSISR=0x40000000; LR=0x9000B29C; R1=0xBFFF51C0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
Proceeding back via exception chain:
Exception state (sv=0x212C2500)
PC=0x00976278; MSR=0x00009030; DAR=0xB0015000; DSISR=0x40000000; LR=0x00976288; R1=0x0CEA3A60; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00976288 0x0099DEC8 0x0099C7F0 0x0096C924 0x002EC884 0x0008CA28
0x00029234 0x000233F8 0x000ABEAC 0x00000FFF
Kernel loadable modules in backtrace (with dependencies):
com.apple.ATIRadeon9700(4.1.8)@0x963000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x877000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x89b000
Exception state (sv=0x21249C80)
PC=0x9000B348; MSR=0x0200F030; DAR=0x06CB4240; DSISR=0x40000000; LR=0x9000B29C; R1=0xBFFF51C0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
Greets,
SvenMaybe something on this page will help you. Scroll to the kernel panic causes near the bottom.
http://docs.info.apple.com/article.html?artnum=106464 -
Can you help with rematching file names
After a computer crash needed to reload my library. When doing this I accidently clicked the option to add track numbers to song names.
Later I was able to locate my iTunes XML from my old PC, however many of the songs (5000 out of 6000) no don't match because the original song name has been changed since my stupid error caused the files names to get the song number in front of them.
Anybody have any tips for matching the filenames back up. In my original library some files had track numbers in front and some did not. How can I match them back up. I'm comfortable programming and modifying the iTunes XML but I can't figure out a good way to list out the contents of my hard drive to do the actual matching.
TonyBecause this forum software is so absolutely USELESS now, you don't get to see the whole of the question in this view. In the other (non-list) view it says:
"can you help with a technical problem with the stereo imagery option ? it won't take out lead vocal in a stereo mp3"
And the answer is that if you can't isolate the vocal in the stereo field, or it is one of these odd ones where it's used inverted polarity in different parts of the stereo signal for the same vocal, then you won't be able to. But without a sample, it's impossible to tell. If you can post a link to one, that might help. It has to be external to this site though - Adobe in their infinite wisdom don't allow the posting of audio files on their audio U2U forum. Helpful, that, isn't it? -
Over this past weekend I was moving, via Relocate Masters, large numbers of images from managed status on my MacBook Pro to referenced status on an external drive (an Air Disk, to be precise). This had gone fine for thousands of images, but Sunday night I returned to the computer to find that it was completely locked up in mid-Relocate, and seemed to have been locked up for a while. I'm not sure what happened, but it seemed bad -- I couldn't get to the Force Quit dialog, or anywhere else. I powered down by holding in the power button.
Upon resurrecting things, Aperture would not open the library. Long story shorter, I rebuilt the database and was then able to see the library contents again. But then I noticed that many files were "offline." Digging further, and using the Manage Referenced Files box, I discovered that some 3500 files need to be reconnected.
The Reconnect All button did a little bit of magic for me, but now I've gotten to a point where using Reconnect All only reconnects one file at a time. I was renaming files as I Relocated Masters, and my fear is that this is what has caused the disconnect. *So first,* can anyone tell me that this is what has caused the problem (the problem being my apparent need to now reconnect 3400 files, one-by-one)?
*Second, and more importantly to me, do I have any recourse beyond reconnecting one-by-one?* Again, the problem seems to me to be that the library file expects a file named image.jpg (or whatever), because the change of the file name to greatimage.jpg that occurred during Relocation did not get written to the library file.
Many thanks for all help and suggestions.Homme dArs wrote:
I hope someone else can join in with a definitive answer to your problem, but I don't believe you will be happy using the configuration you are attempting to set up.
Having Aperture access your images via wireless is going to be very very slow, and any connection problems will be very frustrating. I have even abandoned the idea of using wireless backup of image files because it so slow.
Perhaps someone can help with your immediate problem, but I would strongly suggest you find a way to store your referenced files locally (a firewire drive would be ideal).
Thanks. I certainly appreciate your thought, and before trying it myself, my instinct was the same as yours. That said, until the present problem cropped up, I have to say it has been quite a good solution. My network is 802.11n, and I've noticed no real lag in accessing the files or otherwise using Aperture with a library stored as this is.
But yes, I hope someone is able to help me get these 3400-some files reconnected short of one-by-one.
Thank you for your comments. -
Need help with connecting file inputs to arrays
In this assignment I have a program that will do the following: display a list of names inputed by the user in reverse order, display any names that begin with M or m, and display any names with 5 or more letters. This is all done with arrays.
That was the fun part. The next part requires me to take the names from a Notepad file, them through the arrays and then output them to a second Notepad file.
Here is the original program: (view in full screen so that the code doesn't get jumbled)
import java.io.*; //Imports the Java library
class progB //Defines class
public static void main (String[] arguments) throws IOException
BufferedReader keyboard; //<-
InputStreamReader reader; // Allows the program to
reader = new InputStreamReader (System.in); // read the the keyboard
keyboard = new BufferedReader (reader); //<-
String name; //Assigns the name variable which will be parsed into...
int newnames; //...the integer variable for the amount of names.
int order = 0; //The integer variable that will be used to set the array size
String[] array; //Dynamic array (empty)
System.out.println (" How many names do you want to input?"); //This will get the number that will later define the array
name = keyboard.readLine ();
newnames = Integer.parseInt (name); // Converts the String into the Integer variable
array = new String [newnames]; //This defines the size of the array
DataInput Imp = new DataInputStream (System.in); //Allows data to be input into the array
String temp;
int length; //Defines the length of the array for a loop later on
for (order = 0 ; order < newnames ; order++) //<-
{ // Takes the inputed names and
System.out.println (" Please input name "); // gives them a number according to
temp = keyboard.readLine (); // the order they were inputed in
array [order] = temp; //<-
for (order = newnames - 1 ; order >= 0 ; order--) //<-
{ // Outputs the names in the reverse
System.out.print (" \n "); // order that they were inputed
System.out.println (" Name " + order + " is " + array [order]); //<-
for (order = 0 ; order < newnames ; order++) //<-
if (array [order].startsWith ("M") || array [order].startsWith ("m")) // Finds and outputs any and all
{ // names that begin with M or m
System.out.print (" \n "); //
System.out.println (array [order] + (" starts with M or m")); //
} //<-
for (order = 0 ; order < newnames ; order++) //<-
length = array [order].length (); //
if (length >= 5) // Finds and outputs names
{ // with 5 or more letters
System.out.print (" \n "); //
System.out.println ("Name " + array [order] + " have 5 or more letters "); //<-
}The notepad file contains the following names:
jim
laruie
tim
timothy
manny
joseph
matty
amanda
I have tried various methods but the one thing that really gets me is the fact that i can't find a way to connect the names to the arrays. Opening the file with FileInputStream is easy enough but using the names and then outputing them is quite hard. (unless i'm thinking too hard and there really is a simple method)By "connect", do you just mean you want to put the names into an array?
array[0] = "jim"
array[1] = "laruie"
and so on?
That shouldn't be difficult at all, provided you know how to open a file for reading, and how to read a line of text from it. You can just read the line of text, put it in the array position you want, until the file is exhausted. Then open a file for writing, loop through the array, and write a line.
What part of all that do you need help with? -
I would really appreciate any help on this! I have my itunes library on an external hard drive. The power adapter to that drive failed. I replaced it, but now when I open itunes it doesn't recognize where any of my files are. A friend told me to try to go into Edit>Preferences and find the drive of my hard drive and reset that as where the files are. That didn't work. I can go in manually and click on a song where the window pops up that itunes can't find the file, and I am able to find it and then it will play. But to do that with all files in my library would take forever. Thank you so much for any help!
(I have itunes 8)Try This. Hold the shift key down, and open iTunes. Do not let up on the shift key until you get a window that asks you to choose a library, or create a new library. If iTunes opens without giving you that choice, just close it and re-open it with the shift key down. Nine times out of Ten it works on the first try. Click "choose a library". You will get another window that allows you to navigate to your hard drive and show iTunes where your music is stored. In a folder called iTunes or iTunes Music, choose "iTunes Library.itl" This should bring back your entire library the way it was when you last used it.
-
Another Install Problem (With Log Files)
Hey there.
I've read many of the install problem threads and have tried numerous things to get this working, but to no avail. This is getting VERY frustrating.. :-E
Machine is a Dell Latitude with 1Gb mem, Running XP Pro SP2.
My login ID is dgault.
I've set my temp directories (temp and tmp) both to point to c:\temp
Hera are my log files:
====================================
XE.bat.log -- START
====================================
Instance created.
====================================
XE.bat.log -- END
====================================
====================================
CloneRmanRestore.log -- START
====================================
SQL> startup nomount pfile="C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts\init.ora";
ORA-24324: service handle not initialized
ORA-24323: value not allowed
ORA-28547: connection to server failed, probable Oracle Net admin error
SQL> @C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts\rmanRestoreDatafiles.sql;
SQL> set echo off;
ERROR:
ORA-03114: not connected to ORACLE
ERROR:
ORA-03114: not connected to ORACLE
ERROR:
ORA-03114: not connected to ORACLE
ERROR:
ORA-28547: connection to server failed, probable Oracle Net admin error
SQL> spool C:\oraclexe\app\oracle\product\10.2.0\server\config\log\cloneDBCreation.log
====================================
CloneRmanRestore.log -- END
====================================
====================================
CloneDBCreation.log -- START
====================================
SQL> Create controlfile reuse set database "XE"
2 MAXINSTANCES 8
3 MAXLOGHISTORY 1
4 MAXLOGFILES 16
5 MAXLOGMEMBERS 3
6 MAXDATAFILES 100
7 Datafile
8 'C:\oraclexe\oradata\XE\system.dbf',
9 'C:\oraclexe\oradata\XE\undo.dbf',
10 'C:\oraclexe\oradata\XE\sysaux.dbf',
11 'C:\oraclexe\oradata\XE\users.dbf'
12 LOGFILE GROUP 1 ('C:\oraclexe\oradata\XE\log1.dbf') SIZE 51200K,
13 GROUP 2 ('C:\oraclexe\oradata\XE\log2.dbf') SIZE 51200K,
14 GROUP 3 ('C:\oraclexe\oradata\XE\log3.dbf') SIZE 51200K RESETLOGS;
SP2-0640: Not connected
SQL> exec dbms_backup_restore.zerodbid(0);
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
SQL> shutdown immediate;
ORA-24324: service handle not initialized
ORA-24323: value not allowed
ORA-28547: connection to server failed, probable Oracle Net admin error
SQL> startup nomount pfile="C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts\initXETemp.ora";
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SQL> Create controlfile reuse set database "XE"
2 MAXINSTANCES 8
3 MAXLOGHISTORY 1
4 MAXLOGFILES 16
5 MAXLOGMEMBERS 3
6 MAXDATAFILES 100
7 Datafile
8 'C:\oraclexe\oradata\XE\system.dbf',
9 'C:\oraclexe\oradata\XE\undo.dbf',
10 'C:\oraclexe\oradata\XE\sysaux.dbf',
11 'C:\oraclexe\oradata\XE\users.dbf'
12 LOGFILE GROUP 1 ('C:\oraclexe\oradata\XE\log1.dbf') SIZE 51200K,
13 GROUP 2 ('C:\oraclexe\oradata\XE\log2.dbf') SIZE 51200K,
14 GROUP 3 ('C:\oraclexe\oradata\XE\log3.dbf') SIZE 51200K RESETLOGS;
SP2-0640: Not connected
SQL> alter system enable restricted session;
SP2-0640: Not connected
SQL> alter database "XE" open resetlogs;
SP2-0640: Not connected
SQL> alter database rename global_name to "XE";
SP2-0640: Not connected
SQL> ALTER TABLESPACE TEMP ADD TEMPFILE 'C:\oraclexe\oradata\XE\temp.dbf' SIZE 20480K REUSE AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED;
SP2-0640: Not connected
SQL> select tablespace_name from dba_tablespaces where tablespace_name='USERS';
SP2-0640: Not connected
SQL> select sid, program, serial#, username from v$session;
SP2-0640: Not connected
SQL> alter user sys identified by "&&sysPassword";
SP2-0640: Not connected
SQL> alter user system identified by "&&systemPassword";
SP2-0640: Not connected
SQL> alter system disable restricted session;
SP2-0640: Not connected
SQL> @C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts\postScripts.sql
SQL> connect "SYS"/"&&sysPassword" as SYSDBA
ERROR:
ORA-28547: connection to server failed, probable Oracle Net admin error
SQL> set echo on
SQL> spool C:\oraclexe\app\oracle\product\10.2.0\server\config\log\postScripts.log
====================================
CloneDBCreation.log -- END
====================================
====================================
postScripts.log -- START
====================================
SQL> @C:\oraclexe\app\oracle\product\10.2.0\server\rdbms\admin\dbmssml.sql;
SP2-0310: unable to open file "C:\oraclexe\app\oracle\product\10.2.0\server\rdbms\admin\dbmssml.sql"
SQL> @C:\oraclexe\app\oracle\product\10.2.0\server\rdbms\admin\dbmsclr.plb;
SQL> DROP PUBLIC DATABASE LINK DBMS_CLRDBLINK;
SP2-0640: Not connected
SQL> CREATE PUBLIC DATABASE LINK DBMS_CLRDBLINK USING 'ORACLR_CONNECTION_DATA';
SP2-0640: Not connected
SQL> CREATE OR REPLACE LIBRARY ORACLECLR_LIB wrapped
2 a000000
3 1
4 abcd
5 abcd
6 abcd
7 abcd
8 abcd
9 abcd
10 abcd
11 abcd
12 abcd
13 abcd
14 abcd
15 abcd
16 abcd
17 abcd
18 abcd
19 16
20 51 8d
21 LSqVp2u3D6yxyD42bHCkpHL03/8wg04I9Z7AdBjDpSjA9TNSMjO9GP4I9Qm4dCtp6jfnlRLO
22 EXUFAGLlV0fbBvBjoirfWNdXU3VV0WYkgIWTZhXOjnGHQ2VzowkkIKuoKmprxsHwQ=
23
24 /
SP2-0640: Not connected
SQL> DROP TYPE DBMS_CLRParamTable;
SP2-0640: Not connected
SQL> DROP TYPE DBMS_CLRType;
SP2-0640: Not connected
SQL> CREATE OR REPLACE TYPE DBMS_CLRType wrapped
2 a000000
3 1
4 abcd
5 abcd
6 abcd
7 abcd
8 abcd
9 abcd
10 abcd
11 abcd
12 abcd
13 abcd
14 abcd
15 abcd
16 abcd
17 abcd
18 abcd
19 d
20 4be 207
21 3WAupYEFJyUtDT58GzFPeWkUS6wwgwKJr0hqynRAv7leuFljpGFIgxvNNkagWXCAOYNjnLy1
22 ulbIGu/7Jr4I+E4ghHw/fZT2AjJ43oXGRL90ldDxQSra1CPcaBsAtcpUa02tik8fNqx/KMgr
23 633l8+Va2DhCmvZXp9G7vbOPt7Pl3MM9zMw2e9Y0okY53GpiRO894C9geS1Y7KzzE/IgLaEu
24 32gKwpBN6M0RCm7BYQ+ovzICzvY5VVyfs/mJp4oYS98qQpcbag5dyZAf0OP/aKDRu8nMxkFb
25 i/etbPODbix+jSyOsHVw8+Q+m5vbJnoYgrAEVyEgB3LQctJbF95qK2fWuM+PzvFnTTxAGGzD
26 bbFaBpyXAP09LtZsxHxeICUOFvBRezKHmWrTb5DRlika6Lg9ukf6Rh9Vb+74Kw+dCaqdPNsm
27 BbgD7N+pj3pEKfdUH3CrGeQtEflPW7LZ5wEdk1k/oTs5nee7t70+LOfUmSdFznr3wK/OVfn4
28 KShfwfMR
29
30 /
SP2-0640: Not connected
SQL> CREATE OR REPLACE TYPE BODY DBMS_CLRType wrapped
2 a000000
3 1
4 abcd
5 abcd
6 abcd
7 abcd
8 abcd
9 abcd
10 abcd
11 abcd
12 abcd
13 abcd
14 abcd
15 abcd
16 abcd
17 abcd
18 abcd
19 e
20 41f 191
21 WGxKHaEucYlWwCTtmi+GiJKjekYwgwK3ctxqfHQHrbs+zza9qFIBBo/k3vRdV42GdJcBu7Vv
22 ITu0l2CDDI1d+D9K6+h7yxxZwO9Xtk4x8RFMvTqmcLYXjeAqvfUCO0DbqqDG+0SG03B8N8zU
23 x3CB7ZzBJqbdVlPKP72aumnr8weouKrQT4tmBg3nhDN3+4ve7JkpJVEIEI+T5dJDg3IF2nEb
24 xv03mcyUhyCvDbOazgEBY+LaQTQ99WwuW3WZw4y5xOakbH7mnBiomlFxUQglR1Hft6tRchhS
25 tJTSEuprYV4kbm7IcRmC1LRlilvfcjDmMRWJUyC8NDvKu45v5GiDxx268uhVJTkhTBGaNgPz
26 idKIcZk/6eV4Myw05MkyijGkKIEIpR3Fl0SO
27
28 /
SP2-0640: Not connected
SQL> CREATE OR REPLACE TYPE DBMS_CLRParamTable AS TABLE OF DBMS_CLRType;
2 /
SP2-0640: Not connected
SQL> CREATE OR REPLACE PACKAGE DBMS_CLR wrapped
2 a000000
3 1
4 abcd
5 abcd
6 abcd
7 abcd
8 abcd
9 abcd
10 abcd
11 abcd
12 abcd
13 abcd
14 abcd
15 abcd
16 abcd
17 abcd
18 abcd
19 9
20 3162 65e
21 igQsRO8he8CDCdDl4nWpC6D62Xcwgz0T2UgFey9AmP9euDHhTNtIIypFDhpSVolmshjyUX7k
22 SDMhxRY91oYjSjLiIwWaV61R3iM8yqEjBdxa/QqeVR3pZs7ue/BsPqTYpXW8XRTJmbmDO5
23 y6g6sM26+9djcF+m6Fqq8mC6NyZn6S5/u5YqlKUW6Z0/jFVzc+7lxa51jAi2w83JxUetuepc
24 Egxc0uEGzxAtwztimeUcybwG552DvNxfbRYPmlZcF9ms5bun8tEOU37kSxAxwg78sGNmXyJg
25 Jp+fefVhVk3C9oZaBEqX7v/i8BgyRDcEjUz9lIky1qFGl+LwK6UjnlZNwvaMFeGiVd1F/AUF
26 mHTk3md05YqDaT+DTqV8W1zC30fR3VfRvaLGYXiY3Q7FSir0QtQzyR8EXCMAYA3EXEaUFpex
27 HwxcYAocVlx+EIrX0XzluGgiDXiY3Q4l/lmPizTlkrkJ9LGUPSicGFqTaYHrCe0hotIXVND2
28 F7HUVK9cmOiDrcMQA+iDHp686BzH3ZSlKjFqVM6JTMPDsiJPMkNbw/6M6OgXOuH2yHO9AMlb
29 OziQdfrmRltzw9EUNffiMMtRhoLdqYs1e2XMMqCVgGctzFg7P2tU+kbANpabiyUIvhhaAu7a
30 xyvmPVJnmysL4u823iZM2GqZiZCpKW3Qv4NbJpkxn9LDl13NZ651CmCRtTHYpzbEOxcukq0t
31 lwO08hc0bwA3SconEG/mRIBo82vHgSlwIZu7C4AMzIIYYHFCc85MYN2EANfivUZrD486W1F/
32 gR3t490htjoHcFdVf1DiPqkXdtb79WooM4LoLHkw8U+qpiF2NYvSl6lJgb7BVdDiI3dux9EI
33 z61yE26Ss4Fd8U7cZM56fUJJ7aWLcdeAiNbVenhTe3KFBHHuOq+tP/9upKGieCQXcjKNfxCw
34 +1WK69iQf7XbU9OsMBAoNQ7Bo27SJLPVjEvTtkKuNfMrly1CbKAe9AzUNy5bE5S593CX54xc
35 Vw68Qij7gam+GE04w25o+7JJ3oiAgi8jYYbYD2zZxIWMz4MmrVq3eE390NbSHyo7jwHegxKK
36 f3h+yaUTftrGMN6jT2lokTEy1KiyE7MSEwHBtNF5y79IE8xyVuVpIMIMc0DE/TJ0uJ7SOfLE
37 6SqgfhRxYRnsuAM1/GFNB7fwRPx19omV1+MCt2mBmwWKreim3q4NJgWKrexOr0FoZGET9buf
38 RaRVyXcxl/K3Xu/C19hkaqBibbH9eQf9JAWUOtDPAvh/ThmIIy15+VGDFNmummh9SXftWiSE
39 D0vX9JgmaYFFgfMECrWS664SELEFQKBDY2tyhUXo5a0E6EMyi2X4B+aqeJszH5WuDGcKF+d/
40 7NklyocS0C9rvMWyDj1qV73XI6vfmBdSFS55SOx3O5uzoKk4Vw3sFlLVkwyA3w2fuV/6PcOI
41 mayz9ZGxGT3tryZDopGviZT6Zd+BJdzRDexA9vz6kHEnKqSxtLQws8Nbtzm7e+9X7kd2yDnN
42 zdju2xPRoVlXR/M41DFx8QRY5B1OfryhhCITa25oua0+Yrt8bQJCmke63jDNWP+92nHIEU+e
43 eWu1mrm9oOz5JJXuag+ENbhu
44
45 /
SP2-0640: Not connected
SQL> show errors
SP2-0640: Not connected
SP2-0641: "SHOW ERRORS" requires connection to server
SQL> CREATE OR REPLACE PACKAGE BODY DBMS_CLR wrapped
2 a000000
3 1
4 abcd
5 abcd
6 abcd
7 abcd
8 abcd
9 abcd
10 abcd
11 abcd
12 abcd
13 abcd
14 abcd
15 abcd
16 abcd
17 abcd
18 abcd
19 b
20 933d 1c32
21 LjzBBzQRtLt3jlDfh/c2/PSd1T8wg1VMr0iGl8DXM4HqbvrJkWfzixk0XWxmoBbxAb73ueCM
22 RRbLF4Q2NZ+TRL3Ilc/PFpNhoqGGvhwPEl1/yYy50S2Sbuvp5ZgYt02SeKOCl+i5zJx/KFxp
23 aZ/LBLWh73oUCRg8SdRqDz1a39OEKQKgLDQEZJMtce5ef+zwT5ZUAAEz+DyK3yH1r6W9A6po
24 7D0uukDHeE98+B48WYNUwiLGik+f6u8SGxS1NCqCLEJ2L+t3M70DnS5Hitkt7rbJtWV/mbaY
25 SUf5MnL9HkDmkEmHIjgzBbALmCL5OJiaYZ89pClOS+R5SYmyKWzrsIqf8r3w2E9C7RImcZ/S
26 PpiQK13CjK4xzdtRdwDHc+QzxAc6TEsQl0hJnMUhQ4JSOrEScdGrIg3/vyM+IHMCRPgaVdyW
27 QwNz5BCwH3l7DyS7I9rtz0o42vmIMPki/JV51sHtvfA3KX/YHCrw73K6F3iVIvxALReJLslq
28 D2EfaNl9/jEPJM3UfluFv4B9udP9PIr9vlcV2XlOnFshHFvkM/i7mPMqWyxzU8ItLAPNQXOf
29 A4H5hrHQlWGBGTicoCZTSI2zFvC3BnJxDdSCxCqMbq2nax8YekAYxpnXgFXwEMHX983iJnIF
30 Ts5j/DsoNO5LzewGJJpMeW6xn6Ne2e99xjPoDZmlcmt+O5e/QFVwJD6lwfP9a0v4ds8mjJb+
31 TsGz4AS6uQe5G5v+16q1EoEPtde1/k+1CJ21Tk+qqpq2WjzNMzO6zSKfGblhBsIIE7+ymAqb
32 MI16BXhySREcqDBfg70JTltZSlJ1cGVlgN8YkeGv19z6B50dxsR+PZCbg8GzKuIseoOH4GHG
33 7m409J5hUCL1Vd3BVQAUxMTEvJs0EDBpnYiE2+zEFupuYf95bFiJPPfLee+BGcmafJCGLD/4
34 0tCd8E4WgA8BmMWC0GgEn+5JSeJhv+LJ/IM73/OOFbgktiRFUFUIKzGQXww4iT+5ToDIdyhu
35 KNqYlEroIub+fYYzRYZ4hc58Kl8oKCFo380RfgvrSpFsTzq665o/s1fOvdttC8nl2uL5zX+j
36 185OV4CGkhWj+1w8JQJcoLCMpHOhJrOzIxHTmh6G0MhSs7gMlSS167uqAIsVmgaznSgKW6rc
37 cL7OeQVtIMwIxBIw6OtBZtN10ktKYbeY/o9XopbUaXifH/4P3w0WGyUsHblz0zGydaQrKbm5
38 uPuL+L7kLd3CHT9fH2jwpJiWzwQyJDsIOVO/EGURdMaGsPq0MYyuTsYzlfeGgDuMxcSGZmNd
39 Ae2Z5FdOIy3wMgkfsM0Dhn/EhwNVilWtwCOZ/I7E4CNytJpiHP2fSz/VyH740Zp4YQCaUzJ+
40 mLzH/rRqJPREB7oGsJCfsFkiwbz5TZIkBNqwCMC/KbYppPMw5P3NIUaGXUrk1sTQ7uT5UsAK
41 V9C/11OnxpR4TLP4lBLyOrTPBfINmWUokO9/KHkkofP+XnoQR5jAkHqojfq7m09jiZAHEpGA
42 ePrJmr0Whow8Un6YMdwLLGA/WTKAFYNg/oLuzTOo4vIj2tCHXjDvPmQEUdzfnxlkm5+2Qvcz
43 G4NFjoG5vwPi8hD+0e2x+IYpM4/4XJpzWYcUnSZF0Sm7P7rSe9K/u9kymbsmSQO3pIv+CjT4
44 WDRaQl5MTAkZQXceyBnWs5iUmjE8Tvhcmj/FlvGa9FPRYLwK0w40KEQi83M/qESXT6g1Oh2r
45 NBxzeWIZCtI/lDHtVMCaskLqjrsZA49dnL31ltDAmrJSaz5kFNvwQTQFL3itnqrGqEhuxtnm
46 aPdu0QdTCrMTNBev+mRRV0ItXV0S7AVDxHH6bxk8jf7lvrd6a/4KvlWihxq+9BrRJ7knFXE6
47 SoxxOm02vptjf+Lk3OMF6K+HB2hhQTQFA73CD4aR4G7G2f9sSl31oUgFRzweyAU8t/7FxN75
48 TviNBZ8clvEFLW68bHhjuRiOeCNOQVx4+vKqmhX9sJvgzaTeHvHknzr8sai8n8HZEo0ZoQa1
49 +JQZSGaW8VWiXpyiFygqhLGoNIC/GQozijQGHnP8u1JlliWPWNtBd2sQvt9suZ4hYSwIY/M/
50 /hV64rLkRBreD/l2Uhz1/hp6ao38giE9YUoGnMzezpWRq/lWkECwAiMWi+3LWCLO1uwjVAMN
51 9l1VIpOHxY0/sYiB+DEaHxs8T1q5PjgzCJdGMYIpK1gt939KvMc4HLEGnao4Mwiu84s1wJxG
52 vpb+vMtcuZBCZGV61ZCqnatorkPp4Xr3PKHege67z9V9o5+omgg5XZbCOs4l8MYp6Ib3dzyG
53 gkO8Gkhf980Qc825jJzsJIZCjfeaVg8/FodBp9EsJo+4+qSHPaB1cxowCKVibcY8kFidAB63
54 30Z58Dqw788cxVnmtKsAibcse8sPUhZ4aEp7RApXNZtNWsHG3XriYSNiVnL2URnL/6GU6xyz
55 XlDcNQB3VXME6ICBt2REKZPwhgWoI3GNU1vSNkteetD8QkG9fVKhPPY1Qod4gZ9U3MWQM3BB
56 UTIYi4tNV49YuEgb6RxkRH2LNNOGzS9VWfJJM8hBNZ/oUB+pxSDW5eTDVENm4ptMcKqOdztV
57 HgY6Tkt6xgjaBuQ4AbwiGJu2bEI10JrzhoTsg8eVznXgzifgeqE2z4R/HAn+HNtXNSlxXyTn
58 UTQiGJtOcInHdkPeyiihRXIQhXpdVJ1vyBdYUCBbXVK5mxyFthr/qeQ1Nadk4sabsPotel4L
59 OhoELILFT/TuqP0zPT/aQV3YvO6WxoSnKWq71L3ysAQi6L0itmqEGMH2ODDs4zqfBBxj3Ll/
60 blH1vWoH8LAsNwhSBaUqa3oxjxK6ISgFwICp3MraldLIR4FZotC3CIeZcgOJvsSETlf6edBD
61 vcOwWoMUYilYEYMhaooNpg0MQnAgW+WQkUjNN+2paHivVUlW5Hw0nCXoh6TN3jyFrt34f9eG
62 jggLV530Qs5eZ511mdL8UAdPShDOG87uPtKuJcpB9HNevdFkMBbAqLJDLnJg6PTvB+/xghSd
63 AjP5frWAs7zIDQiDEa7H1RkczcZ+47ag0Pd66fjOjvhYaa4J84eZBZm9HSBbitLjqtD8iOCV
64 ldaSzV6X0ADKnZIDCK4S0SISGyIQHEE0zPjueoGpaEi0rcD+ZOsZ8E3tmwD7+Qa1HUsy7xmd
65 65LTHSTh+DEMYa7cGrA/19BMMGc6MMCIJbTLLn4PG6plCvOS6O0HQ93d6fGn+LX1W5z/2CxD
66 wlv5dWHWX0qHuxDlO/j5Zx8Ziu2qZP6zBTBJ2ByQKT8TtPg16tQeOinOKswSRh79S9oQwX1G
67 j2qITsQ6VfC+ZSNy3Pxk9FUdTSBnuV0y1LZI0Eo0lsgSmhIBoEEXsnG2ZICpvPst6/4N3HVV
68 dqQvDw6fTs4sYXGUvhNOjDP24P4Ed3gOv4IQ/UP1Qz8HcL4JQEOXPqd4i1RBZjo+rMQQ6tTN
69 Kk6Sp24/ErMivuBkyMy+/GOS6B7SBW3S7qn+JWak+OJ590Fu8A89ZhCpm2JvKbMKA9xvKbZG
70 l5RlxbFZJjRssJsuCSgmVpw/20jaZF93A1kO9maBqYv9yHtCJgaJd0lvJ0IQHqA0BgGjvO7F
71 Yp0NWizrz9Glvs2YYXNqt3QmCoMAz6mbYjPLKDqjXiIsXkrRpb7NmGUirgMN4vRygBaaqXKG
72 sbmQCDq4FU6y8mt31+6mFAlFq6MyI+anWj48h75lqrJHxTL0iWan1RQJGP2eYh/LcCYIsLcK
73 d2wJGALHoRMYHiuIWM3IAirHptM+lbICp+4s8SWLuKbTPpWD1eqL/TcfiYda+K9tCOwyuaZU
74 T1cJ8oc8pawlmd4kMH+HAxndF1vnv1xpHraM0Qsc5Q48SdFx+vaWyy+55Q48SdTARO7LMohO
75 aUQNIghZE0jsladaPjyHvmWahXY8SUqJ8ZyBLu6mqm2i8lKEawHOdN50JUCm8av0ieDNjdVO
76 8I9qni729IlmikqV+6m46kQNIghm9wmJ3zZW6s7DV6YvueUOPLCGenhW6loajniOo9F23Qlq
77 mm/LWhqO8Jfdmfl+VjLuqaLys010egwajvCX3W1nMUhLcTVTCqyjT1O4ViplE9+QZLY+lRW+
78 Gi6VMgpfz+zh38em0z6VsgKn7kSL7xeMdYu4ptM+lYPV6ov9Nx+Jh1r4r20I7DK5plRPVwny
79 hzylrCWZ3iQwf4cDGd0XW+e/XGketozRCxzlDjxJ0XH69pbLL7nlDjxJ1MBE7ssyiE5pRA0i
80 CEfPXX4h100MGo72ZHFYIJHLHraA8vrZkui4qZ3pZmNTa1Blz0AhOd6EpqHwovItM5eNOmCl
81 OALoDaLy85/GBqZnUwqso08w91o+8v3hp9XPxXam579caR62lkeA/2B/bAkYVOLIWj5IFqBx
82 V6ljQJ1idshaPquNNx/kMVT8Ffv0iVHMiDCnWj6rjTcfN8JVcL6suOpEDSJS7lQnkd9O9wPM
83 WfSJ4O5xJegGRVxgyYIsrf2VB0cDWB3IWj5IFqB0lnwsrf2V65HtrXapovItM5eNOmCPRGMf
84 JT+l4DTJkNqmPElKifGcKjQO0uaDKIdfsdh4pTH7FUyUd5LbTdl1B8VNgfSZ6puDbR1GmMVN
85 gfQtcTVThEzUesM1O656giyt/ZUh13wMGo72ZHFYIJHLHraA8vrZkui4qZ3pZmNTa1Blz0Ah
86 Od6EpqHwovItM5eNOmClOALoDaLy85/GBqZnUwqso08w91o+8v3hp9XPxXam579caR62lkeA
87 /2B/MZyi8vPZlNM+lbICp5lbS3elxAId0z7pjGWlrCT9DExXyvcJIcUdctM+6YxlpWZpYf1W
88 6i+55Q48SdF2DPBHySLA3xj6vBQJGALHoRMYHiuIWNfPXX6OXkuW9IkGR/taGo54jqNAH3XQ
89 bvDg5sHNy2smFt3Pkc/eRsG4ptM+lYPV6ov9Nx+Jh1r4r20I7DK5plRPVwnyhzylrCWZ3iQw
90 f4cDGd0XW+e/XGketozRCxzlDjxJ0XH69pbLL7nlDjxJ1MBE7ssyiE5pRA0iCEfPXX6OXkuW
91 hGZjERAGrdM+lYPV6ov9WGqS2/cJm8K8PnaPIPdaPkgWoHRPqPA1gy9nCe/3CdjtwAG8889U
92 a95i9wlGVS1Xpi+55Q48SYcUCRglQKlDnk+eW6YVTJR3ktuZTvcDzFmvvBQJGFTiyFo+SBag
93 cVepY0CdYnbIWj6rjTcf5DFU/BX79IlRzIgwp1o+q403HzfCVXC+rLjqRA0iUu5UJ5HfTvcD
94 zFmvvBQJGALHoRMYHiuIWNdtpLBD13apovJShGsBMDcfC1Vp3RT0UstbyvcJ2O3AAbzzMDUp
95 AqAsNARkk8HLqYH072NdAbKWFu3IM9Yfhioess+fqbjqRA0if/xli2ueJxAGFY00Mwam7uKe
96 JxDgVuovuWmcfyhcaR62cjQEHkDmkAei8rOS28cUCRgN6uJHeGUHgfTvY10BEF5X3Zpm9wlo
97 aRGIIoSr1qCoqRpgZmNUEkOXz+/OS+bro2Zj55gLUqbKaFw1O640WhqOY7L72ZQilMumRpjF
98 TYEpVpbT2ZTTPpWyAqeZW0t3pcQCHdM+6Yxlpawk/QxMV8r3CSHFHXLTPumMZaVmaWH9Vuov
99 ueUOPEnRdgzwR4uVVHiO/G5aPm//bHnF4roBkd+W1EVrUMai8lKLphQJGP2eYmqZNAQeQNzT
100 xcG4ptM+lYPV6ov9Nx+Jh1r4r20I7DK5plRPVwnyhzylrCWZ3iQwf4cDGd0XW+e/XGketozR
101 CxzlDjxJ0XH69pbLL7nlDjxJ1MBE7ssyiE5pRA0iCEdtLUgWWYJ8tj6Vg9Xqi/1YapLb9wmb
102 wrw+do8g91o+SBagdE+o8DWDL2cJ7/cJ2O3AAbzzz1Rr3mL3CUZVLVemL7nlDjxJhxQJGCVA
103 qUOeT55bphVMlHeS25mW1EVrUMai8vPZlNM+lbICp5lbS3elxAId0z7pjGWlrCT9DExXyvcJ
104 IcUdctM+6YxlpWZpYf1W6i+55Q48SdF2DPBHi5VUeI6SdVo+b/9secXiugFd3quGR/taGo54
105 jqNAqlm5bmr7WhqO9mRxWCA2h2kjqM1bltT2PL4dcBAGWj5Ck2qZ8pYac4+VMNcjHU+kymhc
106 NTuuX0VfQk2so09TuGxk7VdnUwqso08E2ZRG2ncBR4SUd5LbA3J/VE8wWhqOO656gGZjVBJD
107 l8/vx1RPVwnyhzx4Ah3kYtM+lbICp+6CGn9a/eFaJxQJGA3q4kd4rCjVITtsCRhL2m9bphVM
108 lHeS222i8syDL0tx7l7upmdTCqyjT+g6UVTiyFo+SBagcVepY0CdYnbIWj6rjTcf5DFU/BX7
109 9IlRzIgwp1o+q403HzfCVXC+rLjqRA0iUu5UJ5Fhcn9UT1f3CVZux/+twW7H0d5eUlXF7wM+
110 MvSJBkf7WhqOeI6jQB8WMsdXpvSJ4M2N1U7w3Znylhpzj5Uw13u/ptiudj5slvYwNSkCoCw0
111 BGSTII8DHUaYxU2B9MycfyhcaR62H+JdDR9b579caR62C76suAdFX0JNrKNPMOh3svSJUYH0
112 wVoajvZkcVggkcsetoDy+tmS6LipnelmY1NrUGXPQCE53oSmofCi8i0zl406YKU4AugNovLz
113 n8YGpmdTCqyjTzD3Wj7y/eGn1c/Fdqbnv1xpHraWiUWi8vPZlNM+lbICp5lbS3elxAId0z7p
114 jGWlrCT9DExXyvcJIcUdctM+6YxlpWZpYf1W6i+55Q48SdF2DPBH6HdsCRgCx/++8bGHdsit
115 uAG0aRGIh9g3RnrDvxpYsqamaCe29/g0yMgH7F/yl3oUCRh+2EL4KxYBFAkYftgK0NObaVX3
116 CQHYWM0L7qlHN9VqQObZpeCyFF015dolRzmm3Tvf875ymb1CTfpNGkeEZmOF1OyzVS1l0z7p
117 3zw9gL1CyPxK9U25WiZlPEczLbhni92NOIRrATAtOdObDjKITks417zzaCe29/g0yMgH7F/y
118 l3oUCRh+2IhVpNXv9wmRC0wQichbO9l1B7L2M/DPVm4dFF04+IfRVurIyFs72XUHsvYz8I8e
119 6nd2z9LUGGQPqKgoPaTeyR28P+nXr4Ag2M6SlNObyj2k3snVbgsmbZ34qj5s6s0=
120
121 /
SP2-0640: Not connected
SQL> show errors
SP2-0640: Not connected
SP2-0641: "SHOW ERRORS" requires connection to server
SQL> CREATE OR REPLACE PUBLIC SYNONYM DBMS_CLR FOR DBMS_CLR;
SP2-0640: Not connected
SQL> DECLARE
2 ORCL_HOME_DIR VARCHAR2(1024);
3 BEGIN
4 DBMS_SYSTEM.GET_ENV('ORACLE_HOME', ORCL_HOME_DIR);
5 EXECUTE IMMEDIATE 'CREATE OR REPLACE DIRECTORY ORACLECLRDIR AS ''' || ORCL_HOME_DIR || '\bin\clr''';
6 END;
7 /
SP2-0640: Not connected
SQL> show errors
SP2-0640: Not connected
SP2-0641: "SHOW ERRORS" requires connection to server
SQL> @C:\oraclexe\app\oracle\product\10.2.0\server\rdbms\admin\patch\patch_4659228.sql;
SQL> set echo off
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
...wwv_flow_help
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0641: "SHOW ERRORS" requires connection to server
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
timing for: Load Start
Elapsed: 00:00:00.00
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
SP2-0640: Not connected
ERROR:
ORA-28547: connection to server failed, probable Oracle Net admin error
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
SP2-0640: Not connected
====================================
postScripts.log -- END
====================================
====================================
PostDBCreation.log -- START
====================================
SQL> connect "SYS"/"&&sysPassword" as SYSDBA
ERROR:
ORA-28547: connection to server failed, probable Oracle Net admin error
SQL> set echo on
SQL> //create or replace directory DB_BACKUPS as 'C:\oraclexe\app\oracle\flash_recovery_area';
SP2-0640: Not connected
SQL> begin
2 dbms_xdb.sethttpport('8080');
3 dbms_xdb.setftpport('0');
4 end;
5 /
SP2-0640: Not connected
SQL> create spfile='C:\oraclexe\app\oracle\product\10.2.0\server\dbs/spfileXE.ora' FROM pfile='C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts\init.ora';
SP2-0640: Not connected
SQL> shutdown immediate;
ORA-24324: service handle not initialized
ORA-24323: value not allowed
ORA-28547: connection to server failed, probable Oracle Net admin error
SQL> connect "SYS"/"&&sysPassword" as SYSDBA
ERROR:
ORA-28547: connection to server failed, probable Oracle Net admin error
SQL> startup ;
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SQL> select 'utl_recomp_begin: ' || to_char(sysdate, 'HH:MI:SS') from dual;
SP2-0640: Not connected
SQL> execute utl_recomp.recomp_serial();
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
SQL> select 'utl_recomp_end: ' || to_char(sysdate, 'HH:MI:SS') from dual;
SP2-0640: Not connected
SQL> alter user hr password expire account lock;
SP2-0640: Not connected
SQL> alter user ctxsys password expire account lock;
SP2-0640: Not connected
SQL> alter user outln password expire account lock;
SP2-0640: Not connected
SQL> spool off;
====================================
PostDBCreation.log -- END
====================================There were no CORE*.LOG files.. So here are the other two..
============================
alert_xe.log START
============================
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Wed Nov 09 10:52:59 2005
ORACLE V10.2.0.1.0 - Beta vsnsta=1
vsnsql=14 vsnxtr=3
Windows XP Version V5.1 Service Pack 2
CPU : 1 - type 586
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:596M/1023M, Ph+PgF:2167M/2459M, VA:1936M/2047M
Wed Nov 09 10:52:59 2005
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_1 parameter default value as C:\oraclexe\app\oracle\product\10.2.0\server\RDBMS
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 285212672
control_files = C:\ORACLEXE\ORADATA\XE\CONTROL.DBF
compatible = 10.2.0.1.0
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
local_listener = (ADDRESS=(PROTOCOL=TCP)(HOST=DGAULT.hotsos.com)(PORT=1521))
job_queue_processes = 4
audit_file_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\CDUMP
db_name = XE
open_cursors = 300
pga_aggregate_target = 94371840
PMON started with pid=2, OS id=2948
PSP0 started with pid=3, OS id=3468
MMAN started with pid=4, OS id=3600
DBW0 started with pid=5, OS id=3148
LGWR started with pid=6, OS id=4028
CKPT started with pid=7, OS id=2588
SMON started with pid=8, OS id=3868
RECO started with pid=9, OS id=124
CJQ0 started with pid=10, OS id=1892
MMON started with pid=11, OS id=1732
Wed Nov 09 10:53:08 2005
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=2344
Wed Nov 09 10:53:08 2005
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
============================
alert_xe.log END
============================
============================
xe_ora_3500.trc START (11:04 AM)
============================
Dump file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_3500.trc
Wed Nov 09 11:04:54 2005
ORACLE V10.2.0.1.0 - Beta vsnsta=1
vsnsql=14 vsnxtr=3
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Beta
Windows XP Version V5.1 Service Pack 2
CPU : 1 - type 586
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:598M/1023M, Ph+PgF:1863M/2459M, VA:1617M/2047M
Instance name: xe
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
Windows thread id: 3500, image: ORACLE.EXE (SHAD)
opiino: Attach failed! error=-1 ifvp=0000000
============================
xe_ora_3500.trc END
============================
Message was edited by:
Doug Gault -
Help with referenced files and importing
This might be more complex than can be addressed here, but I'm struggling with the organization of aperture.
Because I'm not sure I want use aperture forever, and because I occasionally like to use other photo editors, I've opted for a referenced file setup. I typically arrange my pictures into year/month sub folders, with additional folders for special subjects, like my kids. I've been doing this for a long time, it works for me, and I don't want to change.
Problem #1 - avoiding duplicates when I import. When I stick the card in my computer I want to copy just the new files to the directory I specify. Image capture only looks for duplicates in the target directory, which is no help if I'm importing files to "November" from a card that has files that were previously imported to "October." The easiest solution would be to delete the images off of the card after importing, but I can't do that - my wife also wants to copy the pix to her computer and she may not copy for several weeks or months at a time.
I tried using aperture's import feature to copy files directly from my camera's memory card. The import worked, but when I tried to locate the files on disk, aperture told me there were no referenced files. Any idea where they are?
Problem #2 - import. Is there any way to make Aperture watch referenced directories and automatically add new files to the the appropriate project? It's a pain to keep manually importing files.
Problem #3 - Organization. Is there any way to set up aperture so that a project = a physical folder on my drive? I get that Aperture is trying to abstract the physical location of my files, but I don't want them abstracted. Also, why is my aperture primary library 6.2 GB when I do all my work with referenced files? Where are my edited files stored? Are these in the primary library? Where are the files from my photostreams (from my phone) stored?
Would any or all of these issues be resolved by moving to a managed file set up?
Finally, if I can't get Aperture working the way I need it, any insight into how I'd use it as an external editor to something like Picasa? I really like the aperture editing tools - that's why I bought it. But the workflow is just killing me.
Any insights would be appreciated. Thanks.It is not as complex as you are making it. Aperture is not per se an editor. It is for storing and organizing, and quickly decoding RAW images. It is a pretty good editor, but it has the feature to allow you to specify an External Editor to which you can send images for more complex editing, and back -- all from within Aperture.
You don't want to have your images referenced so you can also edit them with other programs. That destroys the non destructive design of Aperture. If you want Referenced images, you mostly want them so they can be on a different hard drive from that used by the Library for keeping track and storing the adjustments, and not so other programs can access them.
You need to read further as to how and why Aperture works the way it does.
Ernie -
Disk space issue with log files
I noticed that I was running out of disk space, so I downloaded OmniDiskSweeper and ran it. Turns out that the main culprit is log files. They are located in /private/var/log/asl. However, OmniDiskSweeper won't let me delete them (it doesn't give an error message or anything--it just won't delete the files). What are these .asl files and how can I delete them? I cannot see them when I open up the Finder, so I assume they are hidden. Any help would be most appreciated. Thanks!
plarkin wrote:
I noticed that I was running out of disk space, so I downloaded OmniDiskSweeper and ran it. Turns out that the main culprit is log files. They are located in /private/var/log/asl. However, OmniDiskSweeper won't let me delete them (it doesn't give an error message or anything--it just won't delete the files). What are these .asl files and how can I delete them? I cannot see them when I open up the Finder, so I assume they are hidden.
Those log files are created by the "Apple System Log" process. The first thing I'd do is to use the Console utility to examine what's in them to see if there's anything obvious that should be fixed. In Console, open the "/var/log" item on the left, open the "asl" item, then select the first item in the list. You'll see a lot of gibberish, but you'll also see some text.
To navigate to those files in the Finder, use the menu item Go -> Go to Folder and type "/var/log/asl" (without the quotes) in the field, and click "Go". -
Help with Exporting files in Aperture
Hello looking for your help (first time poster)
My problem is when I export using Aperture the file size almost triples . I Import Nikon RAW file, make my adjustments and export by using export version- TIFF original size 16bit.
The file size in Aperture is 50mb and when I check it in photoshop the file size is 143mb this is killing my hard drive!!
Cheers Dan.
Message was edited by: d4anIn either 16bit TIFF or PSD - esp if you have multiple bitmapped layers you are going to end up with big files, that is all there is to it. Are you sure you need PS to do your "tidying up" In most cases the answer is probably not depending on what "tidying up" means.
RB -
Help with songs files transfer on iPod and iTouch?
Hey guys.
I just got an itouch recently and I need help with something but I don't really know how to describe it so I'll try my best to put it in a way for you guys to understand. Is there an option where when you plug in the iTouch into your computer, but you don't want to transfer the songs/mp3 files you already have originally on your iPod to be automatically transfer over to your itouch? Everytime when I connect the iTouch to computer it would just copy the mp3 files over to it butI don't really want that. I just want the mp3 file to stay on the iPod only.
Thank you, QuTranDoes it get cut off on the iPod or in iTunes (or both)?
Does it always happen with the same songs?
The problem may be related to the program that was used to encode those files. Do a +Get Info+ on a few of the affected songs and see if there is anything in common where is says +Encoded with+ on the Summary tab.
Maybe you are looking for
-
Read a csv file and read the fiscal yr in the 4th pos?
Hello ABAP Experts, how to write a code for read a csv file and read the fiscal year in the 4th position. any suggestions or code highly appreciated. Thanks, BWer
-
I'm hoping in 2013 to update my early 2009 24inch iMac (2.66Ghz Intel Core 2 duo - 4Gb Ram - 640Mb h/drive). My present iMac seems slow at times, particularly when I have to amend large psd files (about 300-400 Mb) so I want something that will speed
-
Is there a way to rate videos on the iPod like you can in iTunes?
Is there a way to rate videos on the iPod like you can in iTunes? In iTunes I can assign 0 to 5 stars to a video. Can this be done on the iPod? Thanks.
-
Any help would be appreciated . Thank you. Andy
-
DbAdapter / Toplink Performance issues
I'm using the DbAdabpter / Toplink to fetch a sizable dataset (500 - 30,000) row for later emission to a file. The fetch of this data via the DbAdapter / Toplink seems to works reasonably well (albeit quite slow) for datasets between 500-7,000 rows.