Help with Logic Pro 7 and Yamaha 01X please!

My friend has purchased an 01X, a 20" G5 iMac with 1.5GB RAM and Logic Pro 7. He is not the 'techiest' of people so was rather hesitant about going this route for his recording purposes. Having used a Yamaha AW4416 to successfully record an album, he figured that the 01X with Logic would be the next step up the ladder of useability & functionality.
Unfortunately, he is having a great deal of difficulty in getting the 01X to talk to Logic. He purchased and installed the Logic 7.1 update in the hope that things would start to work. Unfortunately, that hasn't helped either. All the 01X is able to do is start and stop the 'play head' in Logic. None of its other functions are having any effect. He is also having problems with mLan.
So, before he throws the whole lot out as a bad idea can anybody provide any success stories with Logic and the 01X. I am hoping to visit him this weekend to see if I can help. However, whilst I know a whole lot about Macs, I have no experience with the 01X or Logic (I used Cubase VST in the past on a few projects). Any help or pointers in troubleshooting this would be very gratefully received.
Lol

i've been looking into getting the 01X and been doing some reading. i have no experience with it but i'm interested in hearing more about how you get on. i did find that www.o1xray.com has a forum full of information about setting up logic and the 01X. ElmerJFud seems to be the main dude, his post has a lot of setup information: http://www.01xray.com/forums/showflat.php?Cat=7&Board=01X_Macintosh&Number=19978 0&page=0&view=collapsed&sb=5&o=&fpart=1

Similar Messages

  • Will Lion work ok with Logic Pro and 3rd party plugins?

    Will Lion OS work ok with Logic Pro and 3rd party plugins?
    Any help would be much appreciated,
    Regards James

    Well, Sylenth I know... works under Logic Pro 9 and it should be found by left clicking and holding... the Software Insturment Button (The one just below where it says i/o and then scrolling down in the menu that appears to the Instrument section below the Apple Plugins...
    I don't know about Massive 1.01 because i think that one is not Logic 9 compatible because it is so old.... and I have never used Vanguard... but according to it's specs the latest version should be found in the same place as Sylenth...
    Both Sylenth and Vanguard are 32bit plugins...
    ...and.. it probably doesn't help that you are using older/not 'legal' copies of these plugins.... *ahem*

  • Help with Logic Pro 8, Apogee Symphony System, and Nehalem 8-core Mac Pro

    So here's the problem. I went on a shopping spree recently and purchased an 8-core Nehalem 8-core Mac with 14 GB RAM, Apogee's Symphony system (With Rosetta 800 and AD-16X), and I use this gear with Logic Pro 8.
    I still get system overload messages. Sometimes with only 1 virtual instrument and 8 audio tracks!
    What gives? I'm running the fastest machine on the fastest system with the fastest/cleanest hardware.
    I'm running Logic Pro on all of its highest settings (like it should). Of course I could drop the buffer size and unclick a few things here and there. but why? Is my machine powerful enough to handle it or not?
    I've deleted the plist a bunch of times and repaired hardisks and everything. any help from a certified LOGIC pro would be excellent and much appreciated! thanks in advance,
    jayme

    jayme Lewis wrote:
    So here's the problem. I went on a shopping spree recently and purchased an 8-core Nehalem 8-core Mac with 14 GB RAM, Apogee's Symphony system (With Rosetta 800 and AD-16X), and I use this gear with Logic Pro 8.
    I still get system overload messages. Sometimes with only 1 virtual instrument and 8 audio tracks!
    What gives? I'm running the fastest machine on the fastest system with the fastest/cleanest hardware.
    I'm running Logic Pro on all of its highest settings (like it should).
    ?It's highest settings?
    Do you mean the sample buffer is at 32 or 1024.
    Even though you have Apple's flagship system it's still possible for Logic to bring it to it's knees. High sample rates plus a couple of space designer reverbs can send a single core into an overload condition.
    Try these settings under Preferences/Audio.
    I/O Buffer Size - 256
    Process buffer - medium
    Do NOT have the I/O Safety Buffer selected.
    More info.
    What sample rate and bit depth are you recording at? ie: 48kHz, 24-bit?
    When you open Logic's CPU meters are you seeing a single core spiking?
    What effects are being used on the audio and single VI track?
    pancenter-

  • Help with Logic Pro 8 Outputs

    Hi
    Struggling with something that i imagine is very simple but just cant work it out! Please help me.
    I will be using Logic 8 within a live environment and need to basically get various audio tracks 'out' of logic via my interface into a mixing desk.  I have 8 sub outs on my interface which is fine for me. (prob lots of people do this also with a mixing desk in the studio environment for intergration with the desk and outboard gear so i 100% sure it can be done!)
    Prob 1 is that the track sub outs in logic come in stereo pairs. If i want bass to go to output 1 , and kick for eg to go to output 2, how can i do this???? Is there a way to change the track outputs to mono?
    Prob 2 is that if i change the outputs in one session, for example click to output 3 - 4, vocals for example to output 5 and 6, then save the session, close and reopen, they have all reverted to output 1 and 2. In a live situation it is annoying to have to change these before each song starts!
    I play in a electro band that incorperates live drums, analog synths, logic audio (backing tracks kinda thing) aswell as live instruments, and finding logic pretty challenging to use for this!! We are flat broke and cant afford new stuff so have been living with it but we are now starting to need more outputs (for the benefits of live mixing , ie not giving the engineer a stereo out) . Surely the mixer in logic is capable of these totally bog standard audio routing options?!?!?
    Thanks alot for any help
    David

    jayme Lewis wrote:
    So here's the problem. I went on a shopping spree recently and purchased an 8-core Nehalem 8-core Mac with 14 GB RAM, Apogee's Symphony system (With Rosetta 800 and AD-16X), and I use this gear with Logic Pro 8.
    I still get system overload messages. Sometimes with only 1 virtual instrument and 8 audio tracks!
    What gives? I'm running the fastest machine on the fastest system with the fastest/cleanest hardware.
    I'm running Logic Pro on all of its highest settings (like it should).
    ?It's highest settings?
    Do you mean the sample buffer is at 32 or 1024.
    Even though you have Apple's flagship system it's still possible for Logic to bring it to it's knees. High sample rates plus a couple of space designer reverbs can send a single core into an overload condition.
    Try these settings under Preferences/Audio.
    I/O Buffer Size - 256
    Process buffer - medium
    Do NOT have the I/O Safety Buffer selected.
    More info.
    What sample rate and bit depth are you recording at? ie: 48kHz, 24-bit?
    When you open Logic's CPU meters are you seeing a single core spiking?
    What effects are being used on the audio and single VI track?
    pancenter-

  • Is macmini enough for a musician that works with logic pro and 10 plugin softsynth at the same time?

    I use to work with a music platform like garageband or logic pro and at the same time I am working with a lot of plugin software like toontrack, ik multimedia, musiclab, native instruments etc. On my PC which has the same specification as macmini i7 2.3GHz this was a big problem especially when I was selecting effects like reverb, chorus or compressor so I had to export tracks all the time. What is the minimum specs that I should have to work without any problem? Any help will be appreciated.

    Welcome to Apple Support Communities
    For what you want the Mac, the Mac mini is OK. It has got a quad-core processor that will give you the performance you need and 4 GB of RAM that you can extend to 16 GB, apart from a removable hard drive.
    The problem is the GPU, but as the applications you are going to use don't require the best GPU, it will work properly. If you want the Mac mini, go for it. An iMac may give you better performance, but the Mac mini is correct.
    If you buy it from Apple, you have 14 days to return the Mac mini if it doesn't work correctly with the apps you need

  • Help with logic pro 8!!

    Hi everyone, I just switched from garageband to logic pro 8 and cant seem to get any sound from my monitors. I'm using a lexicon alpha v interface and my monitors are m-audio av30's. I'm also using a m-audio oxygen49 midi keyboard. This setup worked great in garageband but I cant seem to get it to work in logic pro 8. Logic 8 does recognize the keyboard and I also changed the preferences to the lexicon alpha v but still no sound. I'm really new to this so please be gentle!  Thanks                                            

    I got a good deal on ebay full retail brand new un-opened box with licences. I couldnt afford logic pro 9 so I went with logic pro 8. Plus I'm still learning, when I get better I'll upgrade to logic pro 9.

  • Audio Unit Problem with Logic Pro and Mainstage

    When I go to launch my apps, both Logic Pro and Mainstage get stuck loading an AppleAUspeechsynthesis or something along those lines. It never makes it past there and I either have to force quit or it quits itself. I can press control while launching Logic Pro, but then I only get basic MIDI. I just tried an archive and install and I'm in the process of reinstalling Logic Pro right now. Does anyone know what might be causing this?

    I just tried pasting my crash report. It seems like it is too long to post?

  • Help Required Please with Logic Express and Yamaha O1X

    Hi, I'm a new Logic and Mac user. I have just installed Logic Express and I am trying to get my Yamaha O1X mixer/ interface to work. I have the MLAN Tools installed and I can load a demo song into Logic. The meters on my Mixer are moving, I just cannot hear any sound. Doesanyone know the correct way to set this up to work correctly??
    I Mac 20"   Mac OS X (10.4.9)   Intel Dual Core 2.46 Ghz with 2GB Ram

    Answer these questions for me:
    Is the Monitor A/B switch green or off?
    Do you have the faders 1/2 raised on the 01X in the INST tab, and is the Stereo fader raised?
    Where is your amp/speakers connected to on the O1X?
    Should be connected to monitor L/R out with the A/B switch off (not green).
    If you load the logic demo are the meters moving?
    Is Logic selected as your DAW on the O1X utility tab?
    In your AMS settings....MLAN should be selected for the inputs and outputs
    Make sure you did This!!!!
    To monitor your computer's audio outs via the 01X go to the surface of the 01X. In the upper right click INTERNAL MODE (2nd button from left, top of the 01x next to REMOTE).
    Go to the right of the 01x there are 5 white buttons for
    AUDIO/INST/MIDI/BUS/AUX/OTHER. Choose INST - bring up the faders on Channels 1 and 2. Pan them left and right by clicking PAN (one the surface of the 01X in the PAGE area once, then using the knobs beneath the green screen mLAN 1 and mLAN 2 and spinning the knobs left and right), and control your master volume with the master fader. Use the headphone volume to adjust output level.
    Very important......if you did all of this, play a song from itunes see if there is audio if not you have something connected wrong.
    If you get it from itunes and not logic....then we need to look at logic!
    You need to run logics setup assitant and make sure in the controller setup the O1X is showing! Click rebuild defaults in the controller tab of logic....you should see the faders move!
    let me know....i will stick with ya till we get it working.
    Craig
    email me @ [email protected]

  • Help with Logic Pro X and Addictive Drums

    Hello guys!
    Please be patient (and understanding) with my questions
    I'm trying to do just a basic task, and once I know how to do it, I will expand upon it.
    At this point, all I want to do is use Logic Pro X to record a Drum Track, a Bass Guitar Track, a Electric Guitar Track, and a Vocal Track.
    1) Would you start a New Project from Songwriter or Multi-Track (and why)?
    2) From what screen and how do you open Addictive Drums?
    3) Once Addictive Drums is open, I will pick one of the Preset Patterns and drag it to the Favorites Window on Addictive Drums.
    But once I do that, and here's the most important question (so far ), how specifically do I get/put that Drum Pattern into Logic Pro X?
    Thanks in advance!
    Jerry

    i've been looking into getting the 01X and been doing some reading. i have no experience with it but i'm interested in hearing more about how you get on. i did find that www.o1xray.com has a forum full of information about setting up logic and the 01X. ElmerJFud seems to be the main dude, his post has a lot of setup information: http://www.01xray.com/forums/showflat.php?Cat=7&Board=01X_Macintosh&Number=19978 0&page=0&view=collapsed&sb=5&o=&fpart=1

  • Problem with Logic Pro and Soft eLicenser on Mountain Lion?

    Hi!
    I have a bunch of Arturia synths, which requires the Soft eLicenser to work. This has always worked great with Lion, never any problems with eLicenser (never had to open it etc.)
    Now - I upgraded to Mountain Lion, and tested my synths to make sure everything was OK, experienced a bunch of problems, and did a full recovery to clean Mountain Lion.
    After installing the Arturia synths, and adding my licenses, I installed Logic. Everything worked fine!
    BUT!
    When I closed an Arturia synth within Logic, or closed Logic after running a project with one of these synths, I couldn't reopen any of these synths within Logic afterwards - In fact, I couldn't open the stand-alones either! And when I tried to open the eLicenser Control Center, it would just say "Reading eLicensers" forever. After a reboot, everything is OK.
    I can open and close eLicenser Control Center and standalone synths as many times as I want, as long as I don't open Logic, and then Arturia synths as an AU in Logic.
    I found a workaround: Open the eLicenser Control Center, and let in run in the background (cmd+H), and then open Logic. Then I could open Arturia synths and close them, close Logic and reopen etc. without any problems at all. NO PROBLEMS.
    Until I close the eLicenser Control Center, then I have to reboot to be able to start it again.
    I hope you understand what I mean here. It's a bit hard to explain.
    In short terms: Logic makes Soft eLicenser crash when a eLicenser synth has been opened as an AU.
    The same problem is when scanning the AU with AU manager. eLicenser window should be open before scanning.
    Does ANYBODY have the same problems? Can anyone who has these applications test it out?

    So it definitely seems to be a issue with Logic.
    I can't force this error in 10.7.X no matter how hard I try, but in 10.8.2 it's definitely Logic messing things up.
    Could it be auvaltool which has a bug? Or is that only run with AU manager on validation?
    Hopefully this discussion can get some attention, and maybe it could be corrected. I guess a lot of Logic Pro users also has eLicenser Control Center for validation of their products.

  • Constant crashing with Logic Pro and Vienna Inst

    I saw somewhere on the forum (but can't find it) a string regarding constant crashing of Logic Pro using Vienna Instruments (Special Edition). I'm experiencing 2-5 minutes of work time and then a crash - quite regularly. I also saw people point to Mac OS 10.4.9, which I also have - has this been identified as the culprit and have any fixes been offered?
    Help!

    Actually it's more like 1-2 minutes - sure seems coincidental to having downloaded 10.4.9 - anybody got any suggestions out there? This is killing me.

  • Help with Logic Pro

    I'm a voice actor learning Logic Pro to narrate audio books.  One track.  When I record room tone as a take to fill in an edit (such as taking out a breath), sometimes it does not appear in the composite, sometimes it does.  I have no idea why.  Help on this?

    Also, sometimes the take does appear, but I'm unable to highlight it for it to appear in the composite.

  • Help with Premiere Pro and Elgato HD Capture

    I use the Elgato Game Capture HD to record gameplay. ( i am new to premiere pro) . I am trying to make a YouTube video with 720p footage. When I try playing the video it is jumpy and its like a bunch of pictures playing. I think the frames are off. I dont know how to fix this problem. Can someone please help?

    First, are you doing this to be sure your sequence and video match?
    See 2nd post for picture of NEW ITEM process http://forums.adobe.com/message/3776153
    -and a FAQ on sequence setting http://forums.adobe.com/message/3804341
    2nd, does http://forums.adobe.com/thread/1163126 help?

  • Help with URL Parameters and HTML DataSet please.

    Hello everybody!
    Looking at the example page: "Using URL Parameters to Control Data Regions", towards the bottom it gives an example of "Set by Product Name", from an XML DataSet using the following sample code:
        //Data set for the second example. var ds2 = new Spry.Data.XMLDataSet("../../demos/products/products.xml", "products/product");    //If the URL parameter 'product' has a value, set the XPath that includes a filter and then load the data. if (params.product){    ds2.setXPath("products/product[name = '"+params.product+"']");    ds2.loadData(); }
    Can anyone please explain how to amend this to work with a HTML Dataset rather than XML?
    The first example on the page (Set by RowID) works unchanged for the HTML DataSet, but I don't know what I should replace the 'setXPath' line with.
    I see this has been asked before, but I'm afraid I can't find any answer that works (or, more often, that I can understand properly!)
    Grateful for any suggestions.
    Len

    Wow! Thanks Ben.
    I hadn't thought about using Stacked Containers.
    I'll test this out tonight and let you know how I get on.
    Cheers,
    Len
    A few days later and at last I've been able to test your suggestions.
    I think I must be doing something wrong as the links and content don't work at all:
    http://www.myosanthe-bernhard-huber.com/html/stack1.php
    I know that the stacked containers do work (http://www.myosanthe-bernhard-huber.com/html/stack0.php), so I guess there are some errors in the coding somewhere.
    Would you mind reviewing, please?
    The important thing for me (in this case, anyway) is to get the called page's content using its 'Ref', and I'm not sure what benefit there is in using stacked containers as opposed to master-detail containers.
    The master-detail method works reasonably well for me at
    http://www.myosanthe-bernhard-huber.com/html/fotoalbum.php and sub-pages.
    Perhaps I am betraying my lack of knowledge, but as I said in my original post, I think that I just need the HTMLDataSet equivalent to:
        //Data set for the second example.
    var ds2 = new Spry.Data.XMLDataSet("../../demos/products/products.xml", "products/product");
       //If the URL parameter 'product' has a value, set the XPath that includes a filter and then load the data.
    if (params.product){
       ds2.setXPath("products/product[name = '"+params.product+"']");
       ds2.loadData();
    which as you can see uses an XMLDataSet, but does exactly what I need.
    (see http://labs.adobe.com/technologies/spry/samples/data_region/DataWithURLParams.html)
    Thanks again for your help, Ben.
    Len
    Message was updated by: ec1lennie

  • Random distortion and latency with logic pro and 2 presonus firepods

    Hello,
    I was wondering if any one else has had this trouble, about a month and a half ago I bought another Presonus Firepod interface and I also installed Tiger On my mac. Now I get random distortion and have to restart logic and turn the firepods off then turn them on again then restart logic, sometimes I have to do this a couple of times before the distortion goes away. I noticed a lot of times when I use midi (many notes at a time) I hear crakle too. I was wondering if anyone else has had this problem. please let me know if you have any pointers. I'm not sure if it is my computer, the software, or the interface.
    Thank oyu for your time
    Mike

    I hate to be a cynic, but I've been having problems with my (bought in october)
    Firebox and I would suggest talking with Presonus. I bought a new one which
    exhibited the same issues and spent a month trying to figure out what I was
    doing wrong. Well, it wasn't me, but the Firebox. It had a chip and a board replaced. Presonus was pretty lousy at accepting responsibility and slow
    at a returning a box. If you went through a dealer see if you can exchange it
    for a new one. I wish I had. I'm waiting for an exchange, btw, for this
    fixed box because it leaks audio out bypassed outputs. Don't be afraid to insist that you get a working box if you deal with Presonus. The box is great, the support, for me, has been awful.
    Good Luck!

Maybe you are looking for