Help With Mail Script
Hello.
I want to run the following script to "bounce" (Apple's version of Bounce) an e-mail back to a couple of addresses. I understand that all this actually does is automate the "bounce" menu function in Mail and send back an e-mail saying my address is undeliverable.
So the script I have is:
using terms from application "Mail"
on perform mail action with messages theMessages for rule theRule
tell application "Mail"
repeat with eachMessage in theMessages
try
bounce eachMessage
end try
end repeat
end tell
end perform mail action with messages
end using terms from
I saved it in Script Automator OK. Then created a rule in Mail to run the script. Problem is - nothing happens. I tested it with a couple of my e-mail addresses included in the Rule, and I get no undeliverable message sent back to my send e-mail account.
What am I doing wrong (I am a script novice)? Any thoughts?
Have a look at the script at the end of [this thread|http://discussions.apple.com/thread.jspa?threadID=1951875&tstart=0]. You may find the workaround used there easier to follow. The basic idea is to pass the message to another script to perform a "make" statement. (I think it's "make" -- rather than "send" -- that's the problem, BTW.)
To do a bounce, you'd have to construct and then send the bounced message in a manner similar with what's demonstrated, and that's obviously more trouble than just saying "bounce," but it should work.
Similar Messages
-
I desperately need help with Mail, specifically sending
For Starters: I am on OSX 10.9.2 and am trying to use mail 7.2.
https://discussions.apple.com/post!input.jspa?container=2998&containerType=14&qu estion=I+desperately+need+help+with+Mail%2C+specifically+sending
I cannot send. I have been at this for hours and hours and hours. Here are the details.
my mail server however is s1.sistercompany.net
I can receive email just fine. I can also send mail just find having set this up on my iphone and also in thunderbird (which i hate hate hate hate hate hate hate, which is why I am desperate to set up mail)
The settings in thunderbird are as follows:
Servername: s1.sistercompany.net
port: 465
Authentication method: normal password
Connection Security: SSL/TLS
However, I just can't get this to work in Mail. When I write an email and hit send I get a popup that says:
Cannot send message using the server s1.sistercompany.net
The certifcate for this server is invalid.
Now, my tech guy says yeah the certifacte is invalid because you are going through sistercompany server, there should be some way to just accept the certifcate anyway (but he has never used mail before).
So I have serached around and come up with this: http://support.apple.com/kb/PH11706
Which tells me to use the verify certificate dialogue, which I would do except there is no verify certificate dialog. Any thoughts?
<Email Edited by Host>I don't have a problem watching the Lost episode on abc.com, using a stock MacBook with 512MB RAM. I don't know what technology abc.com uses in their viewer, but I have Flip4Mac and the latest version of Flash player installed.
-
I need help with this script please ASAP
So I need this to work properly, but when ran and the correct answer is chosen the app quits but when the wrong answer is chosen the app goes on to the next question. I need help with this ASAP, it is due tommorow. Thank you so much for the help if you can.
The script (Sorry if it's a bit long):
#------------Startup-------------
display dialog "Social Studies Exchange Trviva Game by Justin Parzik" buttons {"Take the Quiz", "Cyaaaa"} default button 1
set Lolz to (button returned of the result)
if Lolz is "Cyaaaa" then
killapp()
else if Lolz is "Take the Quiz" then
do shell script "say -v samantha Ok starting in 3…2…1…GO!"
#------------Question 1-----------
display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
set A1 to (button returned of the result)
if A1 is "Apprentices" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 2--------
display dialog "Most children were taught
to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
set A2 to (button returned of the result)
if A2 is "Bible" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------------Question 3---------
display dialog "In the 1730s and 1740s, a religious movement called the_______swept through the colonies." buttons {"Glorius Revolution", "Great Awakening", "The Enlightenment"}
set A3 to (button returned of the result)
if A3 is "Great Awakening" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#-----------Question 4--------
display dialog "_______ was
a famous American Enlightenment figure." buttons {"Ben Franklin", "George Washington", "Jesus"}
set A4 to (button returned of the result)
if A4 is "Ben Franklin" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 5-------
display dialog "______ ownership gave colonists political rights as well as prosperity." buttons {"Land", "Dog", "Slave"}
set A5 to (button returned of the result)
if A5 is "Land" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 6--------
display dialog "The first step toward guaranteeing these rights came in 1215. That
year, a group of English noblemen forced King John to accept the…" buttons {"Declaration of Independence", "Magna Carta", "Constitution"}
set A6 to (button returned of the result)
if A6 is "Magna Carta" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 7--------
display dialog "England's cheif lawmaking body was" buttons {"the Senate", "Parliament", "King George"}
set A7 to (button returned of the result)
if A7 is "Parliament" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 8-----
display dialog "Pariliament decided to overthrow _______ for not respecting their rights" buttons {"King James II", "King George", "King Elizabeth"}
set A8 to (button returned of the result)
if A8 is "King James II" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 9------
display dialog "Parliament named ___ and ___ as England's new monarchs in something called ____." buttons {"William/Mary/Glorius Revolution", "Adam/Eve/Great Awakening", "Johhny/Mr.Laphalm/Burning of the hand ceremony"}
set A9 to (button returned of the result)
if A9 is "William/Mary/Glorius Revolution" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 10-----
display dialog "After accepting the throne William and Mary agreed in 1689 to uphold the English Bill of _____." buttons {"Money", "Colonies", "Rights"}
set A10 to (button returned of the result)
if A10 is "Rights" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 11------
display dialog "By the late 1600s French explorers had claimed the ___ River Valey" buttons {"Mississippi", "Ohio", "Hudson"}
set A11 to (button returned of the result)
if A11 is "Ohio" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------Question 12---------
display dialog "______ was sent to ask the French to leave 'English Land'." buttons {"Johhny Tremain", "George Washington", "Paul Revere"}
set A12 to (button returned of the result)
if A12 is "George Washington" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 13-------
display dialog "_____ proposed the Albany Plan of Union" buttons {"George Washingon", "Ben Franklin", "John Hancock"}
set A13 to (button returned of the result)
if A13 is "Ben Franklin" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 14------
display dialog "The __________ declared that England owned all of North America east of the Mississippi" buttons {"Proclomation of England", "Treaty of Paris", "Pontiac Treaty"}
set A14 to (button returned of the result)
if A14 is "" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#-------Question 15-------
display dialog "Braddock was sent to New England so he could ______" buttons {"Command an attack against French", "Scalp the French", "Kill the colonists"}
set A15 to (button returned of the result)
if A15 is "Command an attack against French" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------TheLolQuestion-----
display dialog "____ is the name of the teacher who runs this class." buttons {"Mr.White", "Mr.John", "Paul Revere"} default button 1
set LOOL to (button returned of the result)
if LOOL is "Mr.White" then
do shell script "say -v samantha Congratulations…you…have…common…sense"
else
do shell script "say -v alex Do…you…have…eyes?"
#------END------
display dialog "I hope you enjoyed the quiz!" buttons {"I did!", "It was horrible"}
set endmenu to (button returned of the result)
if endmenu is "I did!" then
do shell script "say -v samantha Your awesome"
else
do shell script "say -v alex Go outside and run a lap"
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end ifUse code such as:
display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
set A1 to (button returned of the result)
if A1 is "Apprentices" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
return
end if
#----------Question 2--------
display dialog "Most children were taught to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
set A2 to (button returned of the result)
if A2 is "Bible" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
return
end if
(90444) -
Hi:
Need your help with something I don´t understand: we try to set up a new hotmail account in Mail (we have used both Preference Panel and directly in Mail) but it never recieves the Inbox. I can send but don´t see anything in Inbox.
I looked into User/Library/Mail/V2/accountname/INBOX.mbox/ and the folder with the xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx name structure is never created.
I tried to set up another hotmail account and it works ok, only this specific account fails.
I Used a Permissions repair, didn't worked. Erased all data in V2, again not worked. Tried to "cheat" Mail setting up another hotmail account and then changing info to the specific account failing, not luck. Also reset sync services (http://support.apple.com/kb/TS1627?viewlocale=es_ES), still not work. Rebuild inside Mail also didn´t worked. Any idea to get this account working?
BTW, sorry for my bad english...Quit Mail. Force quit if necessary.
Back up all data. That means you know you can restore the Mail database, no matter what happens.
Triple-click the line below on this page to select it:
~/Library/Mail/V2/MailData/Envelope Index
Copy the selected text to the Clipboard (command-C). In the Finder, select
Go â¹ Go to Folder
from the menu bar. Paste into the box that opens (command-V), then press return.
A Finder window will open with a file selected. Move the selected file to the Desktop, leaving the window open. Other files in the folder may have names that begin with "Envelope Index". Move those files, if any, to the Trash.
Log out and log back in. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. Click OK.
Test. If Mail now works as expected, you can delete the file you moved to the Desktop. Otherwise, post your results. -
Hi,
I found this Apple script online and here's how it works:
tell application "QuickTime Player"
activate
try
if not (exists document 1) then display dialog "Please open a QuickTime movie." buttons {"Cancel"} default button 1 with icon 1
set thefile to (choose file name)
save document 1 in thefile
close document 1
end try
end tell
+I run the Apple script+
*1. It prompts me to open a movie file in Quicktime*
+I open a movie in Quicktime+
*2. It prompts me for an name and directory to save the new file in*
+I enter a name and directory+
*3. It saves a new reference movie in said directory with said name*
This is useful if I want to customize every file, but unfortunately, I just want to mass create reference movies for a whole bunch of files.
What I am looking for is for an Apple script that is a drag and drop application, so I can drop say 100 movie files or so, and have the Apple script create reference movie files with the same name and in the same directory automatically with no prompts.
Since I am unfamiliar with Apple script I was wondering if someone would be able to edit my existing script to do what I want.
Thanks so much for your help!Use Automator. It's great for repetitious tasks (like the one you've described), and it's very user-friendly. Open Automator, create a new workflow that executes the action you want, and you can apply that action to the resources you wish to edit.
Good resource here:
http://bit.ly/ -
I was wondering if someone could help me with a simple bit of action script 3. I need to make a movie clip (single_mc) disappear when the user clicks on the mouse (stop_btn). Here’s what I have so far.
function setProperty(event:MouseEvent):void
single_mc.alpha=0;
stop_btn.addEventListener(MouseEvent.CLICK, setProperty);
Also I was wonder if you could recommend an Action script 3 book for me. I would like one that is not a training book, but has situations and then the script written out. For example: I click a button and a movie symbol disappears from the stage. I am a graphic artist, that from time to time, needs simple interaction in flash, but cant justify the time to learn the script.
Thanks for your timeuse the snippets panel to help with you with sample code for basic tasks.
function setProperty(event:MouseEvent):void
single_mc.visible=false;
stop_btn.addEventListener(MouseEvent.CLICK, setProperty); -
I found a script online that turns my images into a square (by extending the canvas size of the short side to match the length of the long side) which is awesome, but I would like to do an additional step and I have no scripting experience so hopefully someone can help.
now that my images are square I want to set a maximum dimension of 2500x2500 px, i have found scripts to set a resolution to a specific size but what I want to make sure I avoid is upsampling, so I just want any image larger than 2500x2500 px to down sample to 2500x2500 px
any knowledge on the code for this would be much appreciated.
When I am at the machine with the script I currently use I will paste it here in the meantime if you know something about scaling images down but preventing scaling them up I could probably chimp with the code I have and make it work.Photoshop shipts with a plug-in script that will do that for you. its found under menu File>Automate>Fit Image. Set both width and height to 2500 and check do not resize images that fit so your small square images will not be resized up in size. You could also just create an action that uses both scripts
step 1 menu File>Scripts>Make canvas Square.
setp 2 menu File>Automate>Fit Image. The 2500 x 2500 no upsize option settings will be recorded into the step and when the action is used its dialog will be bypassed and the recorded settings will ne used.
You can then batch the action using menu file>Automate>Batch or menu File>Scripts>Image Processor. -
Would anyone be willing to help me with a script? I need to Find the first table using "ERTStyle1" table style, convert it to text, change the text style to "Tabfix" paragraph style, then convert it back into a table using the table style "ERTStyle2" convert the top row to a header. It needs to repeat this process until there are no tables left using the "ERTStyle1" table style.
I think I could almost do this myself using VBScript, but I am relatively new to scripting, and to be honest, I am hoping I can use this script to jump start my knowledge of VB in Indesign.So all of this is just to set the column widths to the sizes pre-defined in a paragraph style, i.e., always the same?
I feel like I almost could do that in VB!
But in Javascript, all it needs is sth in the ilk of
var myWidths = [ 10, 50, 100, 50, 12 ]; // in whatever units you fancy
var myTable = app.activeDocument.stories[0].tables[0]; // (just grabbing some table)
for (i=0; i<myTable.columns.length; i++)
myTable.columns[i].width = myWidths[i % myWidths.length];
.. and the most interesting thing here (written from top of my head) is the "myWidths" lookup: it doesn't matter how many columns there are in this table, 'cause the widths array wraps around. (But you won't need this because you know all of your widths in advance.) -
Help with two scripts - Mounting remote DMG and Checking which network I'm connected to
Hey guys, I need some help with two separate scripts:
1. The first script I'm trying to create to mount a DMG stored remotely on another Mac using an AppleScript or shell script. Using the following:
set cmd to "hdiutil mount 'afp://username:[email protected]/Lion/Users/username/Desktop/Test.sparseim age'"
do shell script cmd
results in the following error:
error "hdiutil: mount failed - not recognized" number 1
I'm not very experienced regarding AppleScript or using hdiutil, could somebody point out what's wrong with my script?
2. The second script I'm working on to try and essentially prevent the 'Could Not Find Server' Finder dialog when a network mount is unavailable. I guess what I'd like it to do is detect which network I'm connected to, and if I'm connected to the correct network, then mount the shares, otherwise just fail silently without any errors. From the searching I've done, using try statements should do this, but they do not, and I'm still presented with an error dialog after the server cannot be found.
Does anybody have any suggestions on this script? Also, I've seen some tips regarding detecting which wireless network the Mac is connected to, which could work, but what about when connected via Ethernet?
Thanks!Edit: I need to clarify on my first script request:
I need to mount the DMG on the remote Mac, not on the Mac I'm running the script from. -
Can anyone help with the scripting on this file?
Hi, I hope someone with a bigger brain can help me out here.
I've got an existing Flash CS3 file that makes up the result at http://www.infusion-set.com/flash/Elearning/Inset30/inset30_eguide.html.
The client has asked if I could add an extra tab at the top after 'Reconnecting' called 'Contact Us' with link to an extra page. All the design has been done in ActionScript 2 with references to XML files for the dynamic content because it's been done in other languages as well.
I've amended the existing XML file with the correct references for a new page and an accompanying .swf file to play in the animation area.
I've attempted a .fla version where I duplicated one of the existing tabs script, changed the XML references and changed the variables where necessary to 'con or 'Con' (representing Contact Us). Unfortunately it made the tab menu go completely off the page and was obviously wrong in some way.
Can anyone give me a clue as to what to change here on the original file as I'm a bit of a novice with ActionScripts, hence me asking.
For reference I've attached HTML files with the original file scripts and my incorrect version. The timeline is 103 frames with the scripts placed at frame 1 and 102
Thanks.
GarryThe buttons are all created using the same library object (but MC), except for the code you have in the revised file does not call on that for the con button.
You have it calling on something with a linkage name of "con", which a quick check tells me doesn't exist--so it is undefined in the code when you try to use it. I found this by using trace(newConBut._x); after its _x value was assigned, as I mentioned you should try. So the first thing you want to do is change the following line from...
var newConBut = _root.attachMovie("con", "conbut", _root.getNextHighestDepth());
To
var newConBut = _root.attachMovie("but", "conbut", _root.getNextHighestDepth());
so that it uses the but MC that serves that purpose in the library. Then you want to correct the _x assignment of the buttons to what I think you had earlier...
newConBut._x = 650-newConBut._width;
newRecBut._x = newConBut._x-newRecBut._width;
Here is a picture of what those changes do (note, without the XML file I had to finagle things just to work, so the biutton labels aren't what they will be)... -
Help With dynamic scripting for Dervied Property
Hi,
I am trying to get the the list of child nodes and then loopthorugh those nodes to do some calculation in a derived propety using dynamic scripting. I tried with below script.
var childEnumerator = node.GetChildEnumerator();
while(childEnumerator.MoveNext())
var propValue = childEnumerator.GetCurrent().PropValue("Custom.Salary");
print(propValue);
While Evaluating this script I am getting below mentioned error. Any idea what i am missing here?
DRM-16008: There was an error calculating Script property Custom.TotalSalaryExp for EMP_Zone/Emp/PPD1: TypeError: 'GetChildEnumerator' is not a function
Please help me out. thanks fr your co-operation
Regards,
SudiptaTry this instead...
var childEnumerator = node.GetChildEnumerator();
childEnumerator.MoveNext();
while(childEnumerator.GetCurrent() != null)
var propValue = childEnumerator.GetCurrent().PropValue("Custom.Salary");
print(propValue);
childEnumerator.MoveNext(); -
Hi guys,
I need some scripting help with a formula I am trying to create. Basically, the RWDerived property should replace the Spaces in the descrption of a node with an underscore "_". The description property is the system description property. Thanks.
-- AdiFrom the user guide:
"The ReplaceStr function, which requires parameters for the old and new pattern, can take
comma, space, tab, crlf, cr, lf, openparen, or closeparen, in square brackets ([]), in
addition to normal text strings."
It's much better to use "[space]" in your formula so that it won't break if someone edits it and changes the way whitespace is handled down the road. That checkbox is such an annoyance! -
Help with mail installatioin please
could somebody please help with the installation of mail...I have had my mac for 7 months now, and can't use the mail application.
Somebody help please before I die?
thanks
n9milai don't understand...the whole outgoing thing!
my email address is in hotmail. k! I don't have a .mac account
explain this
"incoming Mail Server: The server where your mail waits for you to retrieve it. Also called a POP or IMAP server. Enter the address (name) of the mail server where your mail account resides, and where mail is stored. For example, mail.example.com."
and this
"Outgoing Mail Server: The server that sends your mail to its destination. Also known as an SMTP server. For example, smtp.example.com. To see the server in use by each mail account, choose Edit Server List from the Outgoing Mail Server pop-up menu."
sorry, I'm very slow to comprehending -
I have never used a mac before and i signed up my email address in the mail app, but its downloading all my mail from 2010! and nothing from this year or the last few weeks.... its very frustrating please help!
If none of the following will work If you forgot your Apple ID password (which sounds likely) contact Apple support: Apple ID: Contacting Apple for help with Apple ID account security
-
Need help with a script applied by GPO
Hello,
I need to automate WebFeed insertion for Remote App Users at user logon.
RDS 2012 R2 in place. Remote Apps are provided to W7 clients.
Currently, WebFeed link must be inserted manually in each user's Control Panel\RemoteApp and Desktop Connections. There
is no straight forward way from Microsoft.
But there is a script and instruction I found on web...
I followed the instruction... Created GPO. GPO applies to user but nothing happens.
Can somebody check the script and the instruction that I could wrongly applied.
In instruction there is no word about changing something in the script but only wcx file that the script should
use.
The script is below and here is my .wcx file:
<?xml version="1.0? encoding="utf-8? standalone="yes"?>
<workspace name="Enterprise Remote Access" xmlns="http://schemas.microsoft.com/ts/2008/09/tswcx" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<defaultFeed url="https://my_webserver_real_FQDN/rdweb/Feed/webfeed.aspx" />
</workspace>
I changed the quotes to vertical (") from (”) that
were in my wcx when copied the lines from web.
Still not works.
I
checked Application log, PowerShell and RemoteApp in eventviewer under user session
Everything is clean.
Were I can check the script execution log?
When the user with applied script logs in, the icon of Remote
connection appears for 10 seconds on the task bar and disappears.
Looks like it's trying...
Check please if the script really should not be touched and provide some troubleshooting
steps.
Thanks!
INSTRUCTIONS from
the link:
http://www.concurrency.com/infrastru...rver-2012-rds/
"Unfortunately
Windows 7 clients are out of luck here. If you really want to use GPO to deploy
RemoteApps to Windows 7 clients, then you have to jump through a few
hoops.
Create a new GPO and under User ConfigurationPoliciesWindows
SettingsScripts, double click Logon and click the
Show Files
button. This will open an explorer window where you can copy files that will be
saved within this GPO. Download the
Install-RADCConnection.ps1 script from the TechNet gallery and
save it there. Also create a new Text file named something like feed.wcx,
open it in Notepad and paste in the following three lines of text:
<?xml
version=”1.0″ encoding=”utf-8″ standalone=”yes”?>
<workspace
name=”Enterprise Remote Access” xmlns=”http://schemas.microsoft.com/ts/2008/09/tswcx”xmlnss=”http://www.w3.org/2001/XMLSchema”>
<defaultFeed
url=”https://rds.domain.com/RDWeb/Feed/webfeed.aspx”
/>
</workspace>
Now select the PowerShell Scripts tab and
click the Add button.
Click Browse and select the .ps1 file and
for the parameters enter the name of the wcx file. Click OK twice and you are
ready to scope that policy to a set of users.
<#
.SYNOPSIS
Installs a connection in RemoteApp and Desktop Connections.
.DESCRIPTION
This script uses a RemoteApp and Desktop Connections bootstrap file(a .wcx file) to set up a connection in Windows 7 workstation. No user interaction is required.It sets up a connection only for the current user. Always run the script in the user's session.
The necessary credentials must be available either as domain credentials or as cached credentials on the local machine. (You can use Cmdkey.exe to cache the credentials.)
Error status information is saved in event log: (Applications and Services\Microsoft\Windows\RemoteApp and Desktop Connections).
.Parameter WCXPath
Specifies the path to the .wcx file
.Example
PS C:\> Install-RADCConnection.ps1 c:\test1\work_apps.wcx
Installs the connection in RemoteApp and Desktop Connections using information
in the specified .wcx file.
#>
Param(
[parameter(Mandatory=$true,Position=0)]
[string]
$WCXPath
function CheckForConnection
Param (
[parameter(Mandatory=$true,Position=0)]
[string]
$URL
[string] $connectionKey = ""
[bool] $found = $false
foreach ($connectionKey in get-item 'HKCU:\Software\Microsoft\Workspaces\Feeds\*' 2> $null)
if ( ($connectionKey | Get-ItemProperty -Name URL).URL -eq $URL)
$found = $true
break
return $found
# Process the bootstrap file
[string] $wcxExpanded = [System.Environment]::ExpandEnvironmentVariables($WCXPath)
[object[]] $wcxPathResults = @(Get-Item $wcxExpanded 2> $null)
if ($wcxPathResults.Count -eq 0)
Write-Host @"
The .wcx file could not be found.
exit(1)
if ($wcxPathResults.Count -gt 1)
Write-Host @"
Please specify a single .wcx file.
exit(1)
[string] $wcxFile = $wcxPathResults[0].FullName
[xml] $wcxXml = [string]::Join("", (Get-Content -LiteralPath $wcxFile))
[string] $connectionUrl = $wcxXml.workspace.defaultFeed.url
if (-not $connectionUrl)
Write-Host @"
The .wcx file is not valid.
exit(1)
if ((CheckForConnection $connectionUrl))
Write-Host @"
The connection in RemoteApp and Desktop Connections already exists.
exit(1)
Start-Process -FilePath rundll32.exe -ArgumentList 'tsworkspace,WorkspaceSilentSetup',$wcxFile -NoNewWindow -Wait
# check for the Connection in the registry
if ((CheckForConnection $connectionUrl))
Write-Host @"
Connection setup succeeded.
else
Write-Host @"
Connection setup failed.
Consult the event log for failure information:
(Applications and Services\Microsoft\Windows\RemoteApp and Desktop Connections).
exit(1)
--- When you hit a wrong note its the next note that makes it good or bad. --- Miles DavisUse GPP for this. Do not use a script. Post your issues in the GP forum.
You should also visit the RDS forum to get information on how to distribute remote app links.
¯\_(ツ)_/¯
Maybe you are looking for
-
Sun One Application Server 7 SSL Reverse Proxy Setup?
Hi, I've made a similiar post on the Web Server forum, http://forum.sun.com/jive/thread.jspa?threadID=95666&tstart=0 I've noticed there's a reverse proxy plug in setup for Web Server, as well as a AddOn package for Application Server. I've so far suc
-
Can I link my Apple IDs together in Itunes Match? I have an old ID for my PC and iPhone, where I have several thousand songs (old CDs converted into iTunes library). But I used a different Apple ID on my Mac and iPad, which is where I buy my music f
-
Sharing libraries on home windows network stopped after upgrade to 7.2.0
Up until I upgraded to 7.2.0 I had no problems sharing my iTunes libraries across my windows desktop & 2 windows laptops. Now I can no longer share. Tried deselecting & selecting the share option. Tried pinging each machine. Tried turning firewalls o
-
Executing parameterised PL sql block
hi, I have a procedure which takes in parameter of a table name. In the procedure i have a variable (say rowcount). I want the variable rowcount to have the number of records present in that particular table (passed as a parameter). One way of doing
-
BI Broadcast - Have Empty Workbook
Hello, We try to run a precalc on workbooks and broadcast to email address. Received workbook in e-mail (as excel attachment) but workbook has no data on it (empty workbook). Anyone experienced this and how to fix it ? Thanks Andy