Help with Mailbox

I am a new user and although my mail is working ok I have 2 additional
"google" malboxes which have appeared where it says I have several hundred mails in them. However I cannot open the mailboxes and I cant delete them as an error message appears saying they cannot be deleted due to server problem.
I dont have a google mail account. Anyone know how I can delete these ?

Hi Barry, thanks for your advice. Unfortunately this did not work as these mailboxes don't show under accounts. Whilst all of my other mailboxes are in light blue the two google ones are greyed out. When I right click I get this message " The mailbox “[Google Mail]” could not be deleted. The IMAP command DELETE failed with server error:"

Similar Messages

  • Need Help with mailboxes

    I have recently switched to .mac for my mail and am also using the Mac mail program for the first time. I set it up with a primary email address, but wanted to add another mailbox. I did so from the mail program itself, but after I tried to go online with it, it turned out there was already another mailbox out there with that name. So I set another up through the online (web) mail program. Now I can't get rid of the old one and can't get the new one to show up on my mail program. The bogus mailbox now has a perpetual spinning gear next to it as well as a triangle icon with a ! in the middle of it. when I put my cursor over that triangle, a window pops up with this:
    "There may be a problem with the mail server or network. Check the settings for account “davidmcgill” or try again.
    The server error encountered was: The connection to the server “mail.mac.com” on port 993 timed out."
    I have quit and restarted the program with no change. I think I might have tried to send mail from that mailbox, thinking it was the newer good one. Thanks for any help you can give.

    There are server issues with .Mac at the present time. I copied the following under Support via webmail access for my .Mac account.
    +100% of members might experience slower than normal response when using IMAP mail. Mail can be sent and received using .Mac webmail. Normal service will be restored ASAP.+

  • Help with mailbox recovery

    We recently implemented retention policies at one of our sister companies. In preparation for that, the owner of that company (and of all of our company's) needed to setup rules to keep all messages to/from a specific list of senders. While processing those
    multiple rules, the rules created massive amounts of duplicates and ballooned his mailbox to 553GB, which obviously caused other side effects, with log file growth, free space, backups, etc. We've opened a PSS ticket to assist with determining why the rules
    behaved as they did.
    So moving forward, I think we've decided (unless someone here has a better idea) to restore a version of his mailbox to a pst, from the night before the rules began running. Then the team who created the rules will handle final resolution of his mailbox.
    We run full backups on Friday evenings, and differentials on the other days. I've used our 3rd party backup software (Arkeia) to restore the raw database & log files to a restore folder, but I cannot get the database state to become clean in
    order to mount it into the recovery database. What I find odd about this restore is that it restored one .edb and 46,456 log files (e03001e544b.log through e03001f09c0.log). The Exchange build is 14.3.158.1.
    The path of the restored edb & logs is: G:\Restore\program files\microsoft\exchange server\v14\mailbox\ahp mailbox database
    After the restore completed, I made a backup copy of the .edb and placed it here: G:\Restore
    Using the non-backup copy of the .edb, below is what I receive. I've already ran these commands once, am I'm running them again for documentation purposes... not sure if there is a side effect to running them multiple times?
    -----snip---
    G:\Restore\program files\microsoft\exchange server\v14\mailbox\ahp mailbox database>eseutil /mh "G:\Restore\program files\microsoft\exchange server\v14\mailbox\
    ahp mailbox database\ahp mailbox database.edb"
    Extensible Storage Engine Utilities for Microsoft(R) Exchange Server
    Version 14.03
    Copyright (C) Microsoft Corporation. All Rights Reserved.
    Initiating FILE DUMP mode...
             Database: G:\Restore\program files\microsoft\exchange server\v14\mailbox\ahp mailbox database\ahp mailbox database.edb
    DATABASE HEADER:
    Checksum Information:
    Expected Checksum: 0x565185ef
      Actual Checksum: 0x565185ef
    Fields:
            File Type: Database
             Checksum: 0x565185ef
       Format ulMagic: 0x89abcdef
       Engine ulMagic: 0x89abcdef
     Format ulVersion: 0x620,17
     Engine ulVersion: 0x620,17
    Created ulVersion: 0x620,17
         DB Signature: Create time:07/31/2013 16:25:04 Rand:494601362 Computer:
             cbDbPage: 32768
               dbtime: 1314255407 (0x4e55f22f)
                State: Dirty Shutdown
         Log Required: 2034091-2034111 (0x1f09ab-0x1f09bf)
        Log Committed: 0-2034112 (0x0-0x1f09c0)
       Log Recovering: 2033344 (0x1f06c0)
      GenMax Creation: 08/01/2014 17:33:38
             Shadowed: Yes
           Last Objid: 352545
         Scrub Dbtime: 0 (0x0)
           Scrub Date: 00/00/1900 00:00:00
         Repair Count: 0
          Repair Date: 00/00/1900 00:00:00
     Old Repair Count: 0
      Last Consistent: (0x1BC139,8,1F)  07/01/2014 19:14:51
          Last Attach: (0x1BC13A,9,86)  07/01/2014 19:14:51
          Last Detach: (0x0,0,0)  00/00/1900 00:00:00
                 Dbid: 1
        Log Signature: Create time:07/31/2013 16:25:04 Rand:494597472 Computer:
           OS Version: (6.1.7601 SP 1 NLS ffffffff.ffffffff)
    Previous Full Backup:
            Log Gen: 1987659-1987678 (0x1e544b-0x1e545e) - OSSnapshot
               Mark: (0x1E545F,8,16)
               Mark: 07/25/2014 17:37:47
    Previous Incremental Backup:
            Log Gen: 0-0 (0x0-0x0)
               Mark: (0x0,0,0)
               Mark: 00/00/1900 00:00:00
    Previous Copy Backup:
            Log Gen: 0-0 (0x0-0x0)
               Mark: (0x0,0,0)
               Mark: 00/00/1900 00:00:00
    Previous Differential Backup:
            Log Gen: 1987659-2028177 (0x1e544b-0x1ef291) - OSSnapshot
               Mark: (0x1EF292,8,16)
               Mark: 07/31/2014 20:03:37
    Current Full Backup:
            Log Gen: 0-0 (0x0-0x0)
               Mark: (0x0,0,0)
               Mark: 00/00/1900 00:00:00
    Current Shadow copy backup:
            Log Gen: 0-0 (0x0-0x0)
               Mark: (0x0,0,0)
               Mark: 00/00/1900 00:00:00
         cpgUpgrade55Format: 0
        cpgUpgradeFreePages: 0
    cpgUpgradeSpaceMapPages: 0
           ECC Fix Success Count: none
       Old ECC Fix Success Count: none
             ECC Fix Error Count: none
         Old ECC Fix Error Count: none
        Bad Checksum Error Count: none
    Old bad Checksum Error Count: none
      Last checksum finish Date: 00/00/1900 00:00:00
    Current checksum start Date: 00/00/1900 00:00:00
          Current checksum page: 0
    Operation completed successfully in 0.141 seconds.
    G:\Restore\program files\microsoft\exchange server\v14\mailbox\ahp mailbox database>
    ---snip---
    So it is a dirty shutdown and the logs required are 2034091-2034111 (0x1f09ab-0x1f09bf), which is e03001f09ab.log-e03001f09bf, which I have:
    ---snip---
    G:\Restore\program files\microsoft\exchange server\v14\mailbox\ahp mailbox database>dir e03001f09a*
     Volume in drive G is Database
     Volume Serial Number is F0B8-EE92
     Directory of G:\Restore\program files\microsoft\exchange server\v14\mailbox\ahp mailbox database
    08/13/2014  04:20 PM         1,048,576 e03001f09a0.log
    08/13/2014  04:20 PM         1,048,576 e03001f09a1.log
    08/13/2014  04:20 PM         1,048,576 e03001f09a2.log
    08/13/2014  04:20 PM         1,048,576 e03001f09a3.log
    08/13/2014  04:20 PM         1,048,576 e03001f09a4.log
    08/13/2014  04:20 PM         1,048,576 e03001f09a5.log
    08/13/2014  04:20 PM         1,048,576 e03001f09a6.log
    08/13/2014  04:20 PM         1,048,576 e03001f09a7.log
    08/13/2014  04:20 PM         1,048,576 e03001f09a8.log
    08/13/2014  04:20 PM         1,048,576 e03001f09a9.log
    08/13/2014  04:20 PM         1,048,576 e03001f09aa.log
    08/13/2014  04:20 PM         1,048,576 e03001f09ab.log
    08/13/2014  04:20 PM         1,048,576 e03001f09ac.log
    08/13/2014  04:20 PM         1,048,576 e03001f09ad.log
    08/13/2014  04:20 PM         1,048,576 e03001f09ae.log
    08/13/2014  04:20 PM         1,048,576 e03001f09af.log
                  16 File(s)     16,777,216 bytes
                   0 Dir(s)  134,549,012,480 bytes free
    G:\Restore\program files\microsoft\exchange server\v14\mailbox\ahp mailbox database>dir e03001f09b*
     Volume in drive G is Database
     Volume Serial Number is F0B8-EE92
     Directory of G:\Restore\program files\microsoft\exchange server\v14\mailbox\ahp mailbox database
    08/13/2014  04:20 PM         1,048,576 e03001f09b0.log
    08/13/2014  04:20 PM         1,048,576 e03001f09b1.log
    08/13/2014  04:20 PM         1,048,576 e03001f09b2.log
    08/13/2014  04:20 PM         1,048,576 e03001f09b3.log
    08/13/2014  04:20 PM         1,048,576 e03001f09b4.log
    08/13/2014  04:20 PM         1,048,576 e03001f09b5.log
    08/13/2014  04:20 PM         1,048,576 e03001f09b6.log
    08/13/2014  04:20 PM         1,048,576 e03001f09b7.log
    08/13/2014  04:20 PM         1,048,576 e03001f09b8.log
    08/13/2014  04:20 PM         1,048,576 e03001f09b9.log
    08/13/2014  04:20 PM         1,048,576 e03001f09ba.log
    08/13/2014  04:20 PM         1,048,576 e03001f09bb.log
    08/13/2014  04:20 PM         1,048,576 e03001f09bc.log
    08/13/2014  04:20 PM         1,048,576 e03001f09bd.log
    08/13/2014  04:20 PM         1,048,576 e03001f09be.log
    08/13/2014  04:20 PM         1,048,576 e03001f09bf.log
                  16 File(s)     16,777,216 bytes
                   0 Dir(s)  134,549,012,480 bytes free
    ---snip---
    So let's check the log files...I snipped out the middle due to the number of log files but but only one log is shown as bad, and it's not one which is needed by the .edb file:
    ---snip---
    G:\Restore\program files\microsoft\exchange server\v14\mailbox\ahp mailbox database>eseutil /ml "G:\Restore\program files\microsoft\exchange server\v14\mailbox\ahp mailbox database\e03" > logtest.txt
    Extensible Storage Engine Utilities for Microsoft(R) Exchange Server
    Version 14.03
    Copyright (C) Microsoft Corporation. All Rights Reserved.
    Initiating FILE DUMP mode...
    Verifying log files...
         Base name: e03
          Log file: G:\Restore\program files\microsoft\exchange server\v14\mailbox\ahp mailbox database\e03001e544b.log - OK
          Log file: G:\Restore\program files\microsoft\exchange server\v14\mailbox\ahp mailbox database\e03001e544c.log - OK
          Log file: G:\Restore\program files\microsoft\exchange server\v14\mailbox\ahp mailbox database\e03001e544d.log - OK
          Log file: G:\Restore\program files\microsoft\exchange server\v14\mailbox\ahp mailbox database\e03001f06c0.log - OK
          Log file: G:\Restore\program files\microsoft\exchange server\v14\mailbox\ahp mailbox database\e03001f06c1.log
                    ERROR: Cannot read log file header. Error -4001.
          Log file: G:\Restore\program files\microsoft\exchange server\v14\mailbox\ahp mailbox database\e03001f06c2.log - OK
          Log file: G:\Restore\program files\microsoft\exchange server\v14\mailbox\ahp mailbox database\e03001f09c0.log - OK
          Log file: G:\Restore\program files\microsoft\exchange server\v14\mailbox\ahp mailbox database\E03.log - OK
    Operation terminated with error -4001 (JET_errFileIOBeyondEOF, a read was issued to a location beyond EOF (writes will expand the file)) after 392.374 seconds.
     ---snip---
     Let's try to replay the log files into the database:
    ---snip---
    G:\Restore\program files\microsoft\exchange server\v14\mailbox\ahp mailbox database>eseutil /r E03 /l "G:\Restore\program files\microsoft\exchange server\v14\ma
    ilbox\ahp mailbox database" /s "G:\Restore\program files\microsoft\exchange server\v14\mailbox\ahp mailbox database" /d "G:\Restore\program files\microsoft\exch
    ange server\v14\mailbox\ahp mailbox database"
    Extensible Storage Engine Utilities for Microsoft(R) Exchange Server
    Version 14.03
    Copyright (C) Microsoft Corporation. All Rights Reserved.
    Initiating RECOVERY mode...
        Logfile base name: E03
                Log files: G:\Restore\program files\microsoft\exchange server\v14\mailbox\ahp mailbox database
             System files: G:\Restore\program files\microsoft\exchange server\v14\mailbox\ahp mailbox database
       Database Directory: G:\Restore\program files\microsoft\exchange server\v14\mailbox\ahp mailbox database
    Performing soft recovery...
                          Restore Status (% complete)
              0    10   20   30   40   50   60   70   80   90  100
              |----|----|----|----|----|----|----|----|----|----|
              X
    Operation terminated with error -4001 (JET_errFileIOBeyondEOF, a read was issued to a location beyond EOF (writes will expand the file)) after 0.702 seconds.
    ---snip---
    State still shows dirty, even after deleting the *.chk file. Trying to repair the db at this point gives me this:
    ---snip---
    G:\Restore\program files\microsoft\exchange server\v14\mailbox\ahp mailbox database>eseutil /p /t c:\tempdb /g "G:\Restore\program files\microsoft\exchange serv
    er\v14\mailbox\ahp mailbox database\ahp mailbox database.edb"
    Extensible Storage Engine Utilities for Microsoft(R) Exchange Server
    Version 14.03
    Copyright (C) Microsoft Corporation. All Rights Reserved.
    Initiating REPAIR mode...
            Database: G:\Restore\program files\microsoft\exchange server\v14\mailbox\ahp mailbox database\ahp mailbox database.edb
      Temp. Database: c:\tempdb
    Operation terminated with error -1032 (JET_errFileAccessDenied, Cannot access file, the file is locked or in use) after 30.62 seconds.
    G:\Restore\program files\microsoft\exchange server\v14\mailbox\ahp mailbox database>
    ---snip---
    Where am I doing incorrectly? I've never restored an incremental or differential backup on Exchange. Since this is just the full backup, and I also need to add in the differential from a few days later, do I need to mount the full first and somehow import
    the logs from the differential? Or don't mount the db until the differential logs are played back ...??
    Sorry for the novel, just trying to be proactive.
    Thanks,
    Jim

    Hello JimCass,
    From the information, we have one corrupted transaction logs which make the soft recovery(eseutil /r) failed, thus we try to hard repair the database EDB file, however it also report error message as the below:
    =============================================
    Command we use:
    eseutil /p
    /t c:\tempdb /g "G:\Restore\program files\microsoft\exchange server\v14\mailbox\ahp mailbox database\ahp mailbox database.edb"
    Error message:
    Operation terminated with error -1032 (JET_errFileAccessDenied, Cannot access file, the file is locked or in use) after 30.62 seconds.
    =============================================
    From the command we use, I noticed that we want to set the temp database location, right? If so, the command is incorrect. Please use this command instead:
    eseutil /p
    /t “c:\tempdb\tempdb.edb” /g "G:\Restore\program files\microsoft\exchange server\v14\mailbox\ahp mailbox database\ahp mailbox database.edb"
    How to Run Eseutil /P (Repair) in Different Scenarios
    http://technet.microsoft.com/en-us/library/aa997215(v=exchg.65).aspx
    Note: When we specify the temp database location, it should contains
    the full location of the temp EDB file. And the folder “c:\tempdb” should exist otherwise error message like “invalid path” will occur.
    In light of above, please refer to above command to repair the database EDB file. But please aware of that database repair could cause data loss since we have transaction logs can’t be replayed to the EDB file.
    Meanwhile, to merge the differential backup data to the mailboxes, we can first restore the full backup data(250GB), then we can got the mailbox data on 8/1, take the mailbox to production.
    After that, for the differential backup data, also use the same method to get the EDB file to clean shutdown, use your method to restore the data to PST, then import the PST data to the mailbox which have been production. Or we also can use Recovery Database
    to restore the data to a production mailbox.
    Regards, Eric Zou

  • Mail.app - Applescript - Looking for help with my 1st Applescript

    Okay… so I am taking the plunge. I've finally found something that is bugging me enough that I want to make a script to resolve it.
    *Here's the situation:*
    I use Smart Mailboxes a lot. It's my primary window into dealing with email.
    I use MailTags (an addon for Mail) to apply keywords to messages, via Mail Act-On rules (an addon by the same company).
    I use Smart Mailboxes to show me messages with various keywords etc.
    What I have found is that Smart Mailboxes do NOT automatically update themselves. For instance, when a message in the Smart Mailbox is changed in such a way that the filter on that mailbox should not display it, the message will still sit there until I either leave the mailbox and return, or hit Rebuil in the Mailbox menu.
    The same applies for when new mail comes into my Inbox. If there is new mail that qualifies for inclusion in the smart mailbox I am currently viewing, it will not appear until I do one of the above two things.
    What I discovered was this script:
    tell application "Mail" to activate
    tell application "System Events"
    click menu item "Rebuild" in menu ¬
    "Mailbox" in menu bar 1 of process "Mail"
    end tell
    This is what got me thinking about scripting a solution.
    The other option is to assign a keyboard shortcut to the Rebuild command. But I would like the Rebuild to take place automatically when I apply certain rules to messages. I want my Mail Act-on rule to trigger the a Rebuild. I figure I can do this by having it trigger the Rebuild script shown above.
    *HERE IS MY QUESTION:*
    Is there a way to have the script check what the currently active/selected Mailbox is? Or, put another way, can I get it to NOT run if certain mailboxes are selected?
    Here's what I am thinking.
    Under no circumstances do I want this script to be triggered if the current mailbox is NOT a smart mailbox, and IS any of my IMAP mailboxes… most especially the Inboxes. That would trigger a complete cleaning out and rebuilding of the entire IMAP inbox, which has many gigs of mail in it.
    What I am trying to figure out, and would love some help with, is how I can make sure this script ONLY runs when the current mailbox is either ANY smart mailbox, or NOT an IMAP mailbox, or some other logic that keeps it from running in an IMAP mailbox.
    Any tips are greatly appreciated.
    With thanks,
    Jonathan
    Message was edited by: InspiredLife
    Message was edited by: InspiredLife

    Thanks Camalot,
    I appreciate your help with this. I am also enjoying learning more about AppleScript. It seems much easier that other scripting languages, if for no other reason that it uses basic english logic and words.
    When I run your script with an inbox selected, I get the following Result:
    tell application "Mail"
    get selected mailboxes of message viewer 1
    --> {mailbox "INBOX" of account "JE Gmail"}
    end tell
    Result:
    {mailbox "INBOX" of account "JE Gmail" of application "Mail"}
    When I run it with a smart mailbox selected the following is produced:
    tell application "Mail"
    get selected mailboxes of message viewer 1
    --> {current application}
    end tell
    Result:
    {application "Mail"}
    So get the impression it's not throwing up an error. Certainly, either way it does not run what I put into the On Error section, which was simply
    display dialog "Success"
    Is this useful? Can I test if the output contains the word "INBOX" ?
    I notice that if I have, for instance, a SENT folder select, it gives the following result:
    Result:
    {mailbox "INBOX/Sent Messages" of account "[email protected]" of application "Mail"}
    Which again has the word INBOX in there. Drafts comes up a little different.
    Result:
    {mailbox "Drafts ([email protected])" of application "Mail"}
    So if there was a way to parse the result through a test against "INBOX" "DRAFT" etc then this might work. What do you think?
    I have no idea how to go about that though, so your input would be very helpful.
    Thanks,
    Jonathan

  • Help with Moving Emails from Exchange Server 2013

    Hi Team,
    Help, I need a solution on how to copy incoming and outgoing emails together with their attachments and was hoping someone could help with a solution I need to find for this problem.
    1) I have a need to copy all incoming and outgoing emails & attachments from Exchange Server 2013 mailboxes on a daily basis, so they can be archived into an external 3rd party database overnight.
    I believe that the first step is that I can set up another Exchange mailbox, through Journaling to receive these emails. 
    Is there any way that these emails can then be moved direct from the Journaling mailbox that I have created, to a shared folder on the network? If so what format would they be sent out as e.g. .msg, .ems and what is the process?
    Failing that, could they be sent to an Outlook client (not another Exchange mailbox) on the network and stored in a .pst file? (I have a program that will export them from .pst)
    I would really appreciate any assistance that you can provide in this matter.
    Regards, Greg.

    Hi,
    You can set auto-forward on journaling mailbox and auto-forward emails to another mailbox. Why don’t directly archive the emails from the journaling mailbox “an external
    3rd party database”.
    Thanks,
    Simon Wu
    TechNet Community Support

  • Help with Gmail IMAP in Mac Mall: Folders transfered from Exchange server

    I'm in the process of migrating a mail account from an Exchange server over to Goggle Apps. I've transfered all old mail and the existing Exchange folder structure over to Gmail. Gmail doesn't recognize folders but instead reads the folder structure as Labels. When the account is subsequently imported into Mac Mail it appears that the orgiginal Exhange folder structure holds on the other side, which was my intent. These folders appear in Mail within the Mailboxes>Inbox.
    However, there doesn't seem to be a way to insert a new folder into the Gmail IMAP account within the Inbox folder structure. I have successfully created a new "Mailbox" in Mail, but this appears to get inserted into the local version of the Gmail account much lower on the left hand side bar. It seems that I can pick up the "Mailbox" once it is created and move it up into the intended location, but only as a sub-folder. I am not able to promote it to the desired heirarchy or intended location.
    Does anyone have any history with this or possibly a fix or suggestion?
    Thanks!

    My recollection is that unless you are a paid Hotmail account member, you cannot use Mail. Do a search within the discussion group, as I am not an expert, but I recall not getting Hotmail for that very reason.
    Perhaps give gmail a try.....
    That said....I still need some help with my posting! So please and thank you.

  • Help with GMAIL in Mail Program....

    Hi,
    I am using the Apple Mail Program in Leopard and just picked up a Gmail account. I want to set up my Gmail account on 4 different computers work/home/laptop) that I access all the time and am hoping I can set it up so that wherever I check my mail it looks more or less like it does on Gmail.com with respect to the emails:
    1. All mail that I've deleted on another computer is gone from all the other computers when checking mail on those other computers. Is that possible??? Currently, I use a bellsouth.net account and a .mac account, and when I log on to any of the computers via the mail program, it gives me all of my 'new mail', whether or not it was deleted on another computer.
    2. Sent mail. Is there any way to send it on one computer's Mail program and have it show up in my Sent box on the other computers?
    3. Ditto on Trash and other folders
    I did try to set it up my Gmail account using IMAP but I thendeleted the account on Mail because it looked 'weird'. I had a Mailbox in my Inbox for the Gmail account and then also another whole separate, duplicate Gmail account (with All Mail, Drafts, Sent Mail, Spam, Starred, and Trash Folders) further down the left side of mail. In testing an email to gmail account from my .mac account, the mail ended up in two places in my Mail and deleting one did not delete the others.
    If this cannot work, I can just go to gmail.com. BUT, I so love MAIL that I am hoping there is a fix to all this.
    Thanks in advance for any help you can provide.

    My recollection is that unless you are a paid Hotmail account member, you cannot use Mail. Do a search within the discussion group, as I am not an expert, but I recall not getting Hotmail for that very reason.
    Perhaps give gmail a try.....
    That said....I still need some help with my posting! So please and thank you.

  • Users with mailboxes on exchange 2010 cant proxy to OWA on exchange 2013

    We are in the process of migrating from 2010 to 2013.  Users with mailboxes on exchange 2010 can't proxy to the owa on Exchange 2013 - there is no error - just receiving a message "Still working on it"
    alex serdyukov

    Hi Alex,
    As the above suggestion mentioned, you can try to upgrade the Exchange 2013 to CU8 and check if any helps:
    Cumulative Update 8 for Exchange Server 2013
    Best regards,
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Niko Cheng
    TechNet Community Support

  • Help with if statement in cursor and for loop to get output

    I have the following cursor and and want to use if else statement to get the output. The cursor is working fine. What i need help with is how to use and if else statement to only get the folderrsn that have not been updated in the last 30 days. If you look at the talbe below my select statement is showing folderrs 291631 was updated only 4 days ago and folderrsn 322160 was also updated 4 days ago.
    I do not want these two to appear in my result set. So i need to use if else so that my result only shows all folderrsn that havenot been updated in the last 30 days.
    Here is my cursor:
    /*Cursor for Email procedure. It is working Shows userid and the string
    You need to update these folders*/
    DECLARE
    a_user varchar2(200) := null;
    v_assigneduser varchar2(20);
    v_folderrsn varchar2(200);
    v_emailaddress varchar2(60);
    v_subject varchar2(200);
    Cursor c IS
    SELECT assigneduser, vu.emailaddress, f.folderrsn, trunc(f.indate) AS "IN DATE",
    MAX (trunc(fpa.attemptdate)) AS "LAST UPDATE",
    trunc(sysdate) - MAX (trunc(fpa.attemptdate)) AS "DAYS PAST"
    --MAX (TRUNC (fpa.attemptdate)) - TRUNC (f.indate) AS "NUMBER OF DAYS"
    FROM folder f, folderprocess fp, validuser vu, folderprocessattempt fpa
    WHERE f.foldertype = 'HJ'
    AND f.statuscode NOT IN (20, 40)
    AND f.folderrsn = fp.folderrsn
    AND fp.processrsn = fpa.processrsn
    AND vu.userid = fp.assigneduser
    AND vu.statuscode = 1
    GROUP BY assigneduser, vu.emailaddress, f.folderrsn, f.indate
    ORDER BY fp.assigneduser;
    BEGIN
    FOR c1 IN c LOOP
    IF (c1.assigneduser = v_assigneduser) THEN
    dbms_output.put_line(' ' || c1.folderrsn);
    else
    dbms_output.put(c1.assigneduser ||': ' || 'Overdue Folders:You need to update these folders: Folderrsn: '||c1.folderrsn);
    END IF;
    a_user := c1.assigneduser;
    v_assigneduser := c1.assigneduser;
    v_folderrsn := c1.folderrsn;
    v_emailaddress := c1.emailaddress;
    v_subject := 'Subject: Project for';
    END LOOP;
    END;
    The reason I have included the folowing table is that I want you to see the output from the select statement. that way you can help me do the if statement in the above cursor so that the result will look like this:
    emailaddress
    Subject: 'Project for ' || V_email || 'not updated in the last 30 days'
    v_folderrsn
    v_folderrsn
    etc
    [email protected]......
    Subject: 'Project for: ' Jim...'not updated in the last 30 days'
    284087
    292709
    [email protected].....
    Subject: 'Project for: ' Kim...'not updated in the last 30 days'
    185083
    190121
    190132
    190133
    190159
    190237
    284109
    286647
    294631
    322922
    [email protected]....
    Subject: 'Project for: Joe...'not updated in the last 30 days'
    183332
    183336
    [email protected]......
    Subject: 'Project for: Sam...'not updated in the last 30 days'
    183876
    183877
    183879
    183880
    183881
    183882
    183883
    183884
    183886
    183887
    183888
    This table is to shwo you the select statement output. I want to eliminnate the two days that that are less than 30 days since the last update in the last column.
    Assigneduser....Email.........Folderrsn...........indate.............maxattemptdate...days past since last update
    JIM.........      jim@ aol.com.... 284087.............     9/28/2006.......10/5/2006...........690
    JIM.........      jim@ aol.com.... 292709.............     3/20/2007.......3/28/2007............516
    KIM.........      kim@ aol.com.... 185083.............     8/31/2004.......2/9/2006.............     928
    KIM...........kim@ aol.com.... 190121.............     2/9/2006.........2/9/2006.............928
    KIM...........kim@ aol.com.... 190132.............     2/9/2006.........2/9/2006.............928
    KIM...........kim@ aol.com.... 190133.............     2/9/2006.........2/9/2006.............928
    KIM...........kim@ aol.com.... 190159.............     2/13/2006.......2/14/2006............923
    KIM...........kim@ aol.com.... 190237.............     2/23/2006.......2/23/2006............914
    KIM...........kim@ aol.com.... 284109.............     9/28/2006.......9/28/2006............697
    KIM...........kim@ aol.com.... 286647.............     11/7/2006.......12/5/2006............629
    KIM...........kim@ aol.com.... 294631.............     4/2/2007.........3/4/2008.............174
    KIM...........kim@ aol.com.... 322922.............     7/29/2008.......7/29/2008............27
    JOE...........joe@ aol.com.... 183332.............     1/28/2004.......4/23/2004............1585
    JOE...........joe@ aol.com.... 183336.............     1/28/2004.......3/9/2004.............1630
    SAM...........sam@ aol.com....183876.............3/5/2004.........3/8/2004.............1631
    SAM...........sam@ aol.com....183877.............3/5/2004.........3/8/2004.............1631
    SAM...........sam@ aol.com....183879.............3/5/2004.........3/8/2004.............1631
    SAM...........sam@ aol.com....183880.............3/5/2004.........3/8/2004.............1631
    SAM...........sam@ aol.com....183881.............3/5/2004.........3/8/2004.............1631
    SAM...........sam@ aol.com....183882.............3/5/2004.........3/8/2004.............1631
    SAM...........sam@ aol.com....183883.............3/5/2004.........3/8/2004.............1631
    SAM...........sam@ aol.com....183884.............3/5/2004.........3/8/2004............     1631
    SAM...........sam@ aol.com....183886.............3/5/2004.........3/8/2004............     1631
    SAM...........sam@ aol.com....183887.............3/5/2004.........3/8/2004............     1631
    SAM...........sam@ aol.com....183888.............3/5/2004.........3/8/2004............     1631
    PAT...........pat@ aol.com.....291630.............2/23/2007.......7/8/2008............     48
    PAT...........pat@ aol.com.....313990.............2/27/2008.......7/28/2008............28
    NED...........ned@ aol.com.....190681.............4/4/2006........8/10/2006............746
    NED...........ned@ aol.com......95467.............6/14/2006.......11/6/2006............658
    NED...........ned@ aol.com......286688.............11/8/2006.......10/3/2007............327
    NED...........ned@ aol.com.....291631.............2/23/2007.......8/21/2008............4
    NED...........ned@ aol.com.....292111.............3/7/2007.........2/26/2008............181
    NED...........ned@ aol.com.....292410.............3/15/2007.......7/22/2008............34
    NED...........ned@ aol.com.....299410.............6/27/2007.......2/27/2008............180
    NED...........ned@ aol.com.....303790.............9/19/2007.......9/19/2007............341
    NED...........ned@ aol.com.....304268.............9/24/2007.......3/3/2008............     175
    NED...........ned@ aol.com.....308228.............12/6/2007.......12/6/2007............263
    NED...........ned@ aol.com.....316689.............3/19/2008.......3/19/2008............159
    NED...........ned@ aol.com.....316789.............3/20/2008.......3/20/2008............158
    NED...........ned@ aol.com.....317528.............3/25/2008.......3/25/2008............153
    NED...........ned@ aol.com.....321476.............6/4/2008.........6/17/2008............69
    NED...........ned@ aol.com.....322160.............7/3/2008.........8/21/2008............4
    MOE...........moe@ aol.com.....184169.............4/5/2004.......12/5/2006............629
    [email protected]/27/2004.......3/8/2004............1631
    How do I incorporate a if else statement in the above cursor so the two days less than 30 days since last update are not returned. I do not want to send email if the project have been updated within the last 30 days.
    Edited by: user4653174 on Aug 25, 2008 2:40 PM

    analytical functions: http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/functions2a.htm#81409
    CASE
    http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/02_funds.htm#36899
    http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/04_struc.htm#5997
    Incorporating either of these into your query should assist you in returning the desired results.

  • I need help with Sunbird Calendar, how can I transfer it from one computer to the other and to my iphone?

    I installed Sunbird in one computer and my calendar has all my infos, events, and task that i would like to see on another computer that i just downloaded Sunbird into. Also, is it possible I can access Sunbird on my iphone?
    Thank you in advance,

    Try the forum here - http://forums.mozillazine.org/viewforum.php?f=46 - for help with Sunbird, this forum is for Firefox support.

  • Hoping for some help with a very frustrating issue!   I have been syncing my iPhone 5s and Outlook 2007 calendar and contacts with iCloud on my PC running Vista. All was well until the events I entered on the phone were showing up in Outlook, but not

    Hoping for some help with a very frustrating issue!
    I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud  2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel.  I even uninstalled iCloud on the PC and downloaded it again (same version). 
    The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.”  After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
    Sound familiar?  Any ideas on how to solve this iCloud/Outlook issue?  Thanks much in advance!

    Hoping for some help with a very frustrating issue!
    I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud  2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel.  I even uninstalled iCloud on the PC and downloaded it again (same version). 
    The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.”  After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
    Sound familiar?  Any ideas on how to solve this iCloud/Outlook issue?  Thanks much in advance!

  • Help with HP Laser Printer 1200se

    HP Support Line,
    Really need your assistance.  I have tried both contacting HP by phone (told they no longer support our printer via phone help), the tech told me that I needed to contact HP by e-mail for assistance.   I then sent an e-mail for assistance and got that reply today, the reply is as follows  "Randall, unfortunately, HP does not offer support via e-mail for your product.  However many resources are available on the HP web site that may provide the answer to your inquiry.  Support is also available via telephone.  A list of technical support numbers can be round at the following URL........."  The phone numbers listed are the ones I called and the ones that told me I needed to contact the e-mail support for help.
    So here I am looking for your help with my issue.
    We just bought a new HP Pavillion Slimline Desk Top PC (as our 6 year old HP Pavillion PC died on us).  We have 2 HP printers, one (an all-in-one type printer, used maily for copying and printing color, when needed) is connected and it is working fine with the exception of the scanning option (not supported by Windows 7).  However we use our Laser Printer for all of our regular prining needs.  This is the HP LaserPrinter 1200se, which is about 6 years old but works really well.  For this printer we currently only have a parallel connection type cord and there is not a parallel port on the Slimline HP PC.  The printer also has the option to connedt a USB cable (we do not currently have this type of cable).
    We posed the following two questions:
    1.  Is the Laser Jet 1200se compatible with Windows 7?
    and if this is the case
    2.  Can we purchase either a) a USC connection cord (generic or do we need a printer specific cord)? or b) is there there a printer cable converter adapater to attach to our parallel cable to convert to a USB connection?
    We do not want to purchase the USB cable if Windows 7 will not accept the connection, or if doing this will harm the PC.
    We really would appreciate any assitance that you might give us.
    Thank you,
    Randy and Leslie Gibson

    Sorry, both cannot be enabled by design.  That said, devices on a network do not care how others are connected.  You can print from a wireless connection to a wired (Ethernet) printer and v/v.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Going to Australia and need help with Power converters

    Facts:
    US uses 110v on 60hz
    Australia 220v on 50hz
    Making sure I understood that correctly.  Devices I plan on bringing that will use power are PS3 Slim, MacBook Pro 2008 model, and WD 1TB External HDD.  My DS, and Cell are charging via USB to save trouble of other cables.
    Ideas I've had or thought of:
    1.  Get a power converter for a US Powerstrip, and then plug in my US items into the strip and then the strip into an AUS Converter into Australian outlet.  Not sure if this fixes the voltage/frequency change.
    2.  Get power converters for all my devices.  But, not sure if my devices needs ways of lowering the voltage/increasing frequency or something to help with the adjustment.
    3.  Buy a universal powerstrip, which is extremely costly and I wouldn't be able to have here in time (I leave Thursday).  Unless Best Buy carrys one.  

    godzillafan868 wrote:
    Facts:
    US uses 110v on 60hz
    Australia 220v on 50hz
    Making sure I understood that correctly.  Devices I plan on bringing that will use power are PS3 Slim, MacBook Pro 2008 model, and WD 1TB External HDD.  My DS, and Cell are charging via USB to save trouble of other cables.
    Ideas I've had or thought of:
    1.  Get a power converter for a US Powerstrip, and then plug in my US items into the strip and then the strip into an AUS Converter into Australian outlet.  Not sure if this fixes the voltage/frequency change.
    2.  Get power converters for all my devices.  But, not sure if my devices needs ways of lowering the voltage/increasing frequency or something to help with the adjustment.
    3.  Buy a universal powerstrip, which is extremely costly and I wouldn't be able to have here in time (I leave Thursday).  Unless Best Buy carrys one.  
    Check the specs on input voltage/frequency of your power supplies.
    Many laptop power supplies are "universal/global" and are specced something like 80-265 volts AC 50/60 Hz, but not all.  These will just need a connector adapter.
    Unsure about the PS3 Slim - if it isn't universal it could be difficult as you'll need a 110/220 transformer, one big enough (power-handling wise) for the PS3 will be very bulky.
    For the external WD HDD, if it doesn't have a universal supply, you're probably best off just finding a new wallwart for it that is capable of running on 220/50.
    *disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

  • Creation of context sensitive help with pure FM 12 usage doesn't work

    Hi,
    I hope somebody is able to help me with a good hint or tip.
    I am trying to create a context-sensitive Microsoft Help with FM12 only using the abilities of FM (no RoboHelp). For some reasons, my assigned ID's are not used in the generated chm file and therefore the help does not work context-sensitively.
    What did I do?
    - I created my FM files and assigned topic aliases to the headers. I did this two ways: a) using the "Special" menue and assigning a CSH marker and/or b) setting a new marker of type "Topic Alias" and typing the ID. I used only numeric IDs like "2000" or "4200",
    - I created a .h file (projectname.h) - based on the format of the file projectname_!Generated!.h (I read this in some instructions). So the .h file (text file) looks like this:
    #define 2000 2000 /* 4 Anwendungsoberfläche */
    #define 2022 2022 /* 4.1.1 Menü Datei */
    #define 2030 2030 /* 4.1.3 Menü Parametersatz */
    #define 2180 2180 /* 6.6.7 Objektdialog Q-Regler */
    #define 2354 2354 /* 6.9.2 Objektdialog Extran Parameter */
    #define 2560 2560 /* 6.9.5 Objektdialog Extran2D Parametersatz */
    - I published the Microsoft HTML Help. A projectname_!Generated!.h has been created. My IDs were not used in this file:
    #define 2000    1
    #define 2022    2
    #define 2030    3
    #define 2180    4
    #define 2354    5
    #define 2560    6
    - When I open the .chm file and look in the source code, the ID even is totally different. It is not the one, I assigned in FM, it is not the one which I assigned in the projectname.h file and it even is not the one, which was put in the projectname_!Generated!.h file. It is a generated name starting with CSH_1 ...n in a consecutive way numbered.
    Example:
    <p class="FM_Heading1"><a name="XREF_72066_13_Glossar"></a>Gloss<a name="CSH_1"></a>ar</p>
    What goes wrong? Why does FM not take my assigned IDs? I need to use these IDs since our programmers are using those already - I had to re-create the whole online help but the programs stay untouched.
    Please help!
    Many thanks
    Mohi

    Hi Jeff,
    thanks for your note!
    The text in my marker is just a number like "2000" or "4200". As said, I created manually a my.h file and used this marker there. E.g.
    #define 2000 2000.
    Whereby the first 2000 (in my opinion) is the marker text and the second 2000 is the context ID which the programmers are using for the context sensitive call of the help. My definitions in the my.h file were translated to #define 2000 1 (in the my_!Generated!.h file). The source code "translates" the context ID into CSH_8.
    I am still confused :-/
    Thanks
    Mohi

  • Need help with Boot Camp and Win 7

    I have iMac 27" (iMac11,1) 2.8 GHz, quad core, 8MB of L3, 8GB of Memory, Boot ROM Version IM111.0034.B02 and SMC Version 1.54f36 and can't get this machine to run Windows 7 using Boot Camp.  I have successfully loaded Win 7 but when it claims to be starting I only get a black screen after initial start up.
    I have checked and rechecked my software updates and have read and reread the instructions, however, I can't update my Boot Camp to 3.1 (my machine says i'm running 3.0.4) and I need 3.1 but can't load 3.1 because it is an exe file that has to be loaded into Windows after I load Windows but can't open Windows because I can't load Boot Camp 3.1.  That's my excuse anyway, so I'm missing something I just can't figure out what it is....this is where you come in!
    Thanks.
    Mike

    Mike,
    I'm not going to be much help with Boot Camp however I can direct you to the Boot Camp forum where there are more people that know how to troubleshoot it and Windoze 7. You can find it at:
    https://discussions.apple.com/community/windows_software/boot_camp
    Roger

Maybe you are looking for

  • Using the opitical-in with my satellite recei

    I purchased an X-Fi Fatality card to use with my system. One of the things I really wanted to use was the optical in. I have a Satellite reciever and have run an optical cable from that receiver to the X-Fi's optical in. But as of yet, no satellite r

  • Safari 3 backspace goes back space does to bottom of the page

    when im in a text input box such as google search and i say for example make a mistake, but when i hit delete (backspace) to delete the mistake it goes back like when you hit the back button in the browser. can someone please help me fix this. also w

  • Content of my Apps isn't backed up

    I recently had the horrific experience of losing EVERYTHING on my iPhone because my battery just died. When I restored from my backups, none of the content in my apps was saved. The apps themselves were there, but I use a lot of organizing apps and n

  • CONTACT ADOBE AND CANCEL ORDER

    CONTACTING ADOBE. NOT AVAILABLE AFTER THEY HAVE MY MONEY, EVEN IF i CANNOT USE THE PROGRAM.

  • Control core dump behavior for executables matching a pattern

    Systemd directs me to coredump.conf(5) for the gory details on configuring core dumps but even after reading that it's not clear to me if there's a way to have core dumps only generated for certain executables. Ideally, I'd like to pattern match the