Help with making start up disk from .dmg image on hard drive

HI Guys hope you can help i have a .DMG image of my OSX install files and need to know how i burn this onto a dvd so i can use it as a start up disk or do a reinstall.
Never had to even think about any of this before so an idiots guide would be most useful burned the .dmg image to a disk but it wont work as a start up disk and if i open it once inserted it wont work using the start up disk application within system preferences
Any help appreciated

An image of your hard drive? No. A copy of Tiger DVD?
It could be done under Panther with a program called BootCD, but not Tiger.
Why? when you can easily clone your system to a FW drive partition and use that as needed. Or use TechTool Pro 4.5.1 to put an "eDrive" on your boot drive or another drive (~7GB) just for emergencies.
You can use Disk Utility to Restore your boot drive to a disk image and back if you want to store it on another drive and in the event of disaster striking and you need to erase and restore.

Similar Messages

Help with 10.6.4 Archive & Install on Possibly Corrupted Hard Drive

Thanks in advance for your help. I spent a long time on the phone with tech support because my computer was slow and pinwheeling. The guy had me turn it off with the power button and now it won't reboot (even in single user, safe, or pram modes). So I am attempting to reboot from disk and try and archive and reinstall. I tried this method found here http://intlect.com/how-to-archive-and-install-os-x-snow-leopard/ but am not having success. I'm not even sure I know my user name to tell it what directory to move. Is there a way to find out my user name? Any other advice?

#1 should never be skipped: backup before beginning to install or update an operating system.
Back to Disk Utility, this time RESTORE tab.
Point the Target to an external drive volume large enough.
Source is your internal drive.
Or take that new external hard drive and set aside 50GB for an OS install and leave the rest for a backup partition.
Even if Disk Utility First Aid "passes with flying colors" that is not 100% assurance all is okay and sound. Invest in backups, 3rd party disk and system maintenance like Drive Genius 3; TechTool Pro 5.07; or best I've found is Alsoft Disk Warrior.
http://www.macintouch.com/readerreports/harddrives/topic4557.html#d10aug2010
http://www.prosofteng.com/

Recovering data from a newly formatted hard drive

Has anyone had any experience with programs that recover data from a newly formatted hard drive? There seem to be a lot of programs out there to do this, but, a) do they work, and b) which one worked best for you?

Ive had so and so success with a freeware utility called "Recuva"
http://www.recuva.com/
Its from the makers of CCleaner.
*******DISCLAIMER********
I am not an employee of BBY in any shape or form. All information presented in my replies or postings is my own opinion. It is up to you , the end user to determine the ultimate validity of any information presented on these forums.

Cannot eject the start-up disk from my PowerBook G4 (laptop). Can anyone help me? My screen is blank too, that's why I'm using the start-up disk. MacBook Pro (17-inch 2.4 GHz), Mac OS X (10.7.4)

Cannot eject the start-up disk from my PowerBook G4 (laptop). Can anyone help me? My screen is blank too, that's why I'm using the start-up disk.
MacBook Pro (17-inch 2.4 GHz), Mac OS X (10.7.4)

Try holding down the trackpad button while starting up the PowerBook. Holding down mouse button during start up ejects the disc in the optical drive, so I'm guessing it would work the same with the button the the trackpad.

Help with making JLabel visible for a few seconds only

Hello guys,
I need help with making a JLabel object visible for a few seconds only and disappear when a JButton has been clicked.
Here is piece of code where I add mouse listener to the JButton object in my case is (jrbFigure1) and
when is called sets icon and text to the JLabel jlbl object:
jrbFigure1.addMouseListener(new MouseAdapter() {
jrbFigure1.addMouseListener(new MouseAdapter() {
public void mouseClicked(MouseEvent e) {
jlbl.setIcon(cross);
jlbl.setText(wrong);
This piece of code is in a switch statement, the statement is in a method.
The JLabel jlbl object is added in a panel in the constructor of the class.
I really hope someone could help me on this issue.
I would like to thank you in advance for any help or advice given.

Bobson wrote:
Sorry for posting my issue twice, I thought, I posted it in a wrong forum:)It's OK. We'll ask the mods to delete the other thread.
I want the label to appear for X seconds when then button is pressed and disappear after that.Then a Swing Timer is what you want to use.
I need to do this in a number of cases from a switch statement because I several buttons.Better to have several ActionListeners, one for each button or each type of button, rather than one ActionListener with a large switch statement, a so-called switch-board listener. They're messy to debug and upgrade.
I tried to use Swing Timer, but I cannot set it properly.Go through the Sun Swing tutorial on Swing Timers. It's all outlined for you there: [http://java.sun.com/docs/books/tutorial/uiswing/misc/timer.html]

Is there any way to create a time machine backup to an external hard drive with content already on it? I have a hard drive that i have used for pictures but when i try to run a backup it says i need to start from a blank drive. Can i get around it?

Is there any way to create a time machine backup to an external hard drive with content already on it? I have a hard drive that i have used for pictures but when i try to run a backup it says i need to start from a blank drive. Can i get around it?

It would be much better if you had separate drives for the pictures and Time Machine backups.....but, if you want to use the same drive for both purposes, temporarily move the folder with the pictures to another location for safe storage.
Run the Time Machine backup on the hard drive and verify that everything is working correctly. Time Machine will format the disk for you in Mac OS Extended (Journaled) as part of the backup process.
Then move the folder with the pictures back to the hard drive with the Time Machine backups.
When you have tested to make sure that everything is working again, then and only then should you delete the folder with pictures from the temporary storage area.
Again....it would be much better to keep Time Machine backups on a drive just for that purpose, and other data on another drive for that purpose. This is clearly one of those times when the fact that you can do something does not mean to imply that you should do it.

I have a mac os x ver. 10.5.8 2x2.8 quad. my start up disk is almost full. can i change my start up disk from the original hard drive to an additional hard drive i added in Bay 4?

i have a mac os x ver. 10.5.8 2x2.8 quad. my start up disk is almost full. can i change my start up disk from the original hard drive to an additional hard drive i added in Bay 4?

Always want to keep the boot drive with more free space than may seem necessary for performance and to function at its best, 30-40% free or even 50% is not excessive.
Ideal is to separate your system from your data.
You should always have bootable backup / clone of your system
Don't use a green drive for system or data though.
When you are done cloning system and/or data, remove the old original and keep as backup.
Then move the system drive to #1 - no matter what you want to reset the default boot volume to where the system is.
Using Cloning as a Backup Strategy
Carbon Copy Cloner 3.4.1
http://www.bombich.com/software/updates/ccc-3.5.html
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html
How to relocate system and user data to another drive:
http://support.apple.com/kb/HT4337
By staying with 10.5.8 you are not going to receive security updates, might want to consider 10.6.8.

I need help with controlling two .swf's from third.

Hi, thanks for reading!
I need help with controlling two .swf's from third.
I have a problem where I need to use a corporate designed
.swf in a digital signage solution, but have been told by the legal
department that it can not be modified in any way, I also can't
have the source file yada yada. I pulled the .swfs from their
website and I decompiled them to see what I was up against.
The main swf that I need to control is HCIC.swf and the
problem is it starts w/ a preloader, which after loading stops on a
frame that requires user input (button press) on a play button,
before the movie will proceed and play through.
What I have done so far is to create a container swf,
HCIC_container.swf that will act as Target for the HCIC.swf, and
allow me to send actionscript to the file I'm not allowed to
modify.
I managed to get that done with the help of someone on
another forum. It was my hope that the following script would just
start HCIC.swf at a frame past the preloader and play button, and
just play through.
var container:MovieClip = createEmptyMovieClip("container",
getNextHighestDepth());
var mcLoader:MovieClipLoader = new MovieClipLoader();
mcLoader.addListener(this);
mcLoader.loadClip("MCIC.swf", container);
function onLoadInit(mc:MovieClip) {
mc.gotoAndPlay(14);
But unfortunately it didn't solve my problem. Because there
is a media-controller.swf, that is being loaded by HCIC.swf that
has the controls including the play button to start HCIC.swf.
Here's a link to a .zip file with all 3 .swf files, and all 3
.fla files.
http://www.axiscc.com/temp/HCIC.zip
What I need to do is automatically start the HCIC.swf file
bypassing the pre-loader and play button without editing it or the
media-controller.swf in anyway. So all the scripting needs to be
done in HCIC_container.swf.
I know this is confusing, and its difficult to explain, but
if you look at the files it should make sense.
ActionScripting is far from my strong point, so I'm
definitely over my head here.
Thanks for your help.

Got my solution on another forum.
http://www.actionscript.org/forums/showthread.php3?t=146827

Upgrading Hard Drive need help with making it work.

I have just begun copying my HD to a 120GB 2.5" SATA drive.
I'm using Super Duper to copy it, and I understand it will be a bootable disk.
Once it has completed copying, is there anything I need to do to make it the startup disk ?
Do I make it the startup disk before I swap the hard drive out from within System Preferences ?
Also, it is currently called Disk 2 - Will that become the name of my HD (currently obviously called Macintosh HD)
If it is, can I then change the name ?
Any help would be greatly appreciated
Thanks

SuperDuper will make it a bootable disk if that's the backup option you selected. Look at the SD feedback information. It tells you what it will do and will then show the steps checking off each one as they are completed.
All you will need to do is remove the old drive and install the new one. It should be ready to go if you did everything correctly. This includes partitioning the new drive using the GUID partition scheme, setting the format type to Mac OS Extended (Journaled), and then Erasing the drive using the Zero Data option.
Be sure to test the cloned drive before installing by booting the computer with it while it's in the external case.
You can rename the drive anything you want.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Can i restrict apple mail client from downloading all emails...and allow it to pick a start date for gmail mail to sync? i am flooded with old emails, thousands on them ...eating hard drive space of my macbook pro and un necessary overhead

can i restrict apple mail client from downloading all emails...and allow it to pick a start date for gmail mail to sync? i am flooded with old emails, thousands on them ...eating hard drive space of my macbook pro and un necessary overhead

The genius bar technicians can check your MBP for possible hardware problems and specific software issues that you may have. The diagnosis will be free. Any extensive repairs will not be free.
If you have minor software problems, you essentially will have to deal with them yourself. Examine these two comprehensive documents for possible problem definition and solutions. If you encounter problems that you are unable to cope with, start a new discussion and there will be persons willing to assist you in solving them.
https://discussions.apple.com/docs/DOC-3521
https://discussions.apple.com/docs/DOC-3353
Ciao.

Help with writing and retrieving data from a table field with type "LCHR"

Hi Experts,
I need help with writing and reading data from a database table field which has a type of "LCHR". I have given an example of the original code but don't know what to change it to in order to fix it and still read in the original data that's stored in the LCHR field.
Basically we have two Function modules, one that saves list data to a database table and one that reads in this data. Both Function modules have an identicle table which has an array of fields from type INT4, CHAR, and type P. The INT4 field is the first one.
Incidentally this worked in the 4.7 non-unicode system but is now dumping in the new ECC6 Unicode system.
Thanks in advance,
C
SAVING THE LIST DATA TO DB
DATA: L_WA(800).
LOOP AT T_TAB into L_WA.
ZDBTAB-DATALEN = STRLEN( L_WA ).
MOVE: L_WA to ZDBTAB-RAWDATA.
ZDBTAB-LINENUM = SY-TABIX.
INSERT ZDBTAB.
READING THE DATA FROM DB
DATA: BEGIN OF T_DATA,
             SEQNR type ZDBTAB-LINENUM,
             DATA type ZDBTAB-RAWDATA,
           END OF T_TAB.
Select the data.
SELECT linenum rawdata from ZDBTAB into table T_DATA
     WHERE repid = w_repname
     AND rundate = w_rundate
     ORDER BY linenum.
Populate calling Internal Table.
LOOP AT T-DATA.
APPEND T_DATA to T_TAB.
ENDLOOP.

Hi Anuj,
The unicode flag is active.
When I run our report and then to try and save the list data a dump is happening at the following point
LOOP AT T_TAB into L_WA.
As I say, T_TAB consists of different fields and field types whereas L_WA is CHAR 800. The dump mentions UC_OBJECTS_NOT_CONVERTIBLE
When I try to load a saved list the dump is happening at the following point
APPEND T_DATA-RAWDATA to T_TAB.
T_DATA-RAWDATA is type LCHR and T_TAB consists of different fields and field types.
In both examples the dumps mention UC_OBJECTS_NOT_CONVERTIBLE
Regards
C

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help?

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help? FYI: I have been using boot camp with windows 7 and started getting a kernal_data_Page_error and it would reboot windows, i was trying to do a chkdsk on the next reboot, but thats when i started getting this issue. I have put in a new hard drive and went from 2 gigs to 4. I can not get the computer to do anything, even the monitor does not show anything now????

Prep your new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs,) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
After formatting has completed quit DU and return to the installer. Install OS X.

Star-up disk Full; cannot start my 2008 iMac w/ 500 GB hard drive

Kept erasing empty files from my early 2008 Intel iMac(with 500 GB hard drive). Kept getitng message 'Strt-up disk almost full.'
Used Hard drive as start-up disk. Kept getting a file labeled (approx.) EFileS1...(didn't write it down). Tried once to totally erase
this file: Removed Garage Band by moving to trash and securely erasing; and other files( 1-3 Mb at most. Now, get message "Start-up disk Full" and I can't
log onwhen I enter name and PW, I get the screen saver; I don't get the dock or anything else. I tried to use a external hard drive, and I also tried using an external CD/DVD player (integrated one no longer works) to reload SnowLeopard (OS 10.6) with no response (I had upgraded to OS 10.6.8).
I'm now using a Nov 2008 MacBook (burned out screen with external monitor) to write this email).
I'm going to buy 2014 MacBook Pro 15in w/ retina display as my sole computer, but my iMac hard drive has documents I'd like to save-Then I plan to totally
erase its HD before discarding/donating.
All suggestions and help will be appreciated.
Snboshu

If you can get the 2008 started move large libraries such as your iPhoto, iMovie and iTunes libraries to an External HD. Once you have verified the libraries have been successfully moved then Trash the ones on the internal HD and empty the Trash. Once these operations have been done then use:
iPhoto: How to move the Library to an EHD
iMovie: How to move the Library to an EHD
iTunes: How to move the library to an EHD

How do I access my encrypted User Account files from my Back Up hard drive? Time Machine was used to create the back up disk; File Vault was used to encrypt the files.

How do I access my encrypted User Account files from my Back Up hard drive? Time Machine was used to create the back up disk; File Vault was used to encrypt the files.

Thanks. I will try going through TM. Since my Simpletech is on the way out, I'll be plugging in a new external hard drive (other than the back-up drive) and trying to restore the library to the new drive. Any advice or warning if this is NOT the right thing to do?
Meanwhile, that is a great tip to do an alternate back-up using a different means. It's been tough to figure out how to "preserve access" to digital images and files for posterity, knowing the hardware will always fail/obsolesce sooner or later, and that "clouds" are only as good as their consistent and reliable accessibility. Upping the odds with redundancy will help dull the edge of my "access anxiety", though logically, it can never relieve it. Will look into
Carbon Copy Cloner.

Hi, I have a hard disk failure so to recover my data I am using disk utility to restore the data on an external drive while booting from a second external hard drive. When I perform the operation it gives me an input/output error and stops. Any tips?

Hi, I have a hard disk failure so to recover my data I am using disk utility to restore the data on an external drive while booting from a second external hard drive. When I perform the operation and after having selected both my destination and source drives, the operation begins but soon fails due to input/output error. If I try to create an image of the drive it gives me the same error message. Any help would be much appreciated.

Disk Utility only creates a image of the drive, so it's no help getting exactly what you want, which is your files. If the file structure is messed up or the drive is failing then it's no help.
If you have a external boot drive and you can't access the internal non-booting drive though the typical Finder and windows to transfer your files via drag and drop methods, then you need to install Data Rescue on the external boot drive and it will do as best as it can to recover your files. (works on non-encrypted/non-Filevaulted drives only)
.Create a data recovery/undelete external boot drive
Are you sure you have hard drive failure, or that OS X isn't merely not booting?
Because if the drive is working physically, then there is a host of fixes
..Step by Step to fix your Mac
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/

Help with making start up disk from .dmg image on hard drive

Similar Messages

Maybe you are looking for