Help with mega 865 pro and maxtor sata 6L300S0

i have a mega 865 pro i just install a new HDD model maxtor sata 6L300S0 300 GB and it is very slow on the mega i contact maxtor and they say i have to verify if i have correct SATA driver installed. but everything looks ok on the system. where i can download that driver again? any one can help me?
What im doing wrong?

I'm having the same problem with my Mega 865 pro and my Maxtor 6l200mo (200gb).
Seems to boot up fine, dosn't take any longer to load up startup items than my old system. Though using pretty much any program results in the system pausing and stuttering for a few seconds. I have noticed it most recenltly when watching video files (mpeg/divx). While i'm watching a video, it will keep pausing at random times.....sometimes every 5 seconds....sometimes every 5 mintues. It does the same when i'm not connected to the internet too, and does the same if I am simply playing mp3s or just on the internet! When it seems to do it most is like now! I have an mpeg playing (300mb) in a window, and while I am browsing the internet and even typing this post, it is pausing for a few seconds which is really frustrating! My old system was pretty similar spec to my current Msi system, though it wasn't a barebones system and was slighty lower spec. That worked flawlessly doing the same tasks so my guess is it must be an Ata problem. Another Mega865 gripe that is bugging me!
Any help will be much appreciated. Cheers!
P.s My hd Tach results were pretty much the same as centarlrocks

Similar Messages

  • Mega 865 Pro and Nlite - SCM Issues

    Hello, I have just got a Mega 865 Pro and have installed Windows XP on the system using nlite http://www.nliteos.com to strip windows down to the bare minimum, the boot times are great and it goes in to and out of hibernation is seconds, the problem is that I have stripped out one component that allows the System Control Manager to perform properly, my front LED display stays blank, even if I fire up the Intervideo Hometheatre it does nothing and all the front buttons do not respond. Everything else runs fine though
    Has anyone tried out nlite and does anyone know which component of windows I've removed that I should have left in?
    Thanks
    Niblet

    I'll try installing the new SCM program tonight, though the original ones that came on the disc didn't work (they did on a standard install of XP that I did)
    I'll post my findings later.

  • Problems with Mega 865 Pro

    Hi,
     I have a problem with the product Mega PC 865 For. Not risco to install the radio, when the asset tells me no mesa partition found '. what must I do?. Thanks.
     Fabio63

    Hi !!
    To be on the safe side i changed my ram to one piece of corsair ram 512Mb and tested it. Everything works fine.
    Managed to install Win 2003 server last night once... It ran for about 30 mins then the machine hang. It didn't restart.
    When i try to install both xp or 2003 the machine reboots at the same place every single time. Installing devices. When it
    switches from 35 to 34 mins it reboots.
    Are there any newer bios than the one i have ver 1.0 !!?? I haven't found it anywhere. I have tested all peripherals inside
    the machine in other comps and they work fine.
    The thing i have noticed is that it runs very hot !! 58 degrees Celsius just idling in bios !! BTW when the machine is idling
    either on a boot floppy in dos or in bios it runs for hours. My conclusion is either the machine overheats in install mode or
    some device in the machine (mobo) is faulty. But that seems far fetched too due to one succesful install of win 2003 server.
    I use the heatsink that came with the 865 Pro what heatsink do you guys use !!??
    The Wizard

  • Mega 865 Pro and maximum P4 CPU support

     

    Hi,
    i would like to ask if my Mega 865 Pro will tolarate Intel P4 3.8GHz CPU, as i noticed the price are much cheaper than before,  i have now installed P4  3.2 GHz, MSI web Doesnot say any thing about 3.8 but 3.6 seems to be ok, seller confirmed that 3.8 shoukd work but i need another expert openion, finally would i notice a big difference in performance, i have OS MCE 2005 SP2, 2GT of RAM, 320Gt HDD SATA, Sapphire HD2600 XT AGP,
    Below is the product am willing to upgrade to
    PRODUCT SPECIFICATIONS
    Processor Type       INTEL PENTIUM 4
    sSpec Number:     SL8Q9
    CPU Speed:          3.80 GHz
    PCG:                    04B
    Bus Speed:           800 Mhz
    Bus/Core Ratio:    19.0
    L2 Cache Size:      2MB
    L2 Cache Speed:   3.8 Ghz
    Package Type:                          LGA775
    Manufacturing Technology:        90nm
    Core Stepping:                          R0
    CPUID String:                           0F4ah
    Thermal Design Power:             115W 
    Thermal Specification:               72.8 C
    VID Voltage Range:                   1.287V-1.400V
    Regards

  • Help with MEGA 865 PC

    Hi, this is my problem:
    I have a Msi Mega 865 Deluxe barebone pc , i also have a Tv tuner card for mega pc ( TV @nyware ) . I have lost the cable that connects the front panel LCD remote control to the Tv tuner card remote input.  I need to build a new cable but i don't know the correct position of the pin. I see on the front panel LCD that the first o three pin is numebered PIN1 and the last PIN3 . Also, on the Tv tuner card the pin ( of the remote control input connector ) is numbered from PIN1 to PIN3. The Pin1 on the LCD correspond on the Pin1 on the TV card ? Pin2 -> Pin2 and Pin3 -> Pin3? or the configuration is different?
    Please help me!!!
    Thancks !!

    please help me, i have a mega pc 865 and i lost the cable from the front panel lcd to tv pci card , i also have lost the adapter of the tv tuner card. If you hava mega pc 865 with tv tuner card post the correct pin configuration , i don't know if the front  pin1 correspond to the tv tuner card pin 1 and so... . I post a jpg to explain my problem.

  • Need help with iTunes, macbook pro, and ipad

    This is only about the 3rd time I've booted a mac. I have a macbook pro and I have 12 ipads. I want to access itunes on the macbook pro and download applications and then whatever I download I want to be installed on the ipads. I signed in to my itunes account on both the macbook pro and the ipads. I have downloaded an app from itunes, but I can't find it on the macbook pro or on the ipad. How can I tell if it's downloaded and installed on either unit? Thanks

    Did the part numbers match up to 661-3997, 661-4326, and 661-4346 as the seller advised? It looks like a problem with the timing controller. It's odd that it sorta works during the boot screen. I think that screen may be 800 x 600 during boot up when only the Apple shows. Have you tried lowering the resolution to 800 x 600 on the notebook screen while it is running to see if you get any kind of image at all of the Mac desktop? Not that that would be a permanent solution, but it might be helpful in troubleshooting.
    Have you had any further contact with the seller of the panel? I notice they have a high ebay rating. Maybe they will have more information for you. It seems like the panel is correctly installed but isn't compatible for some reason.

  • Help with Adobe Premiere Pro and AME CS6

    Hi all,
    First off, i would like to state that i'm pretty inexperienced in video editing, so please keep that in mind when answering or questioning something.I will try to explain my question to the best of my abilities, but please answer in a 'simple' manner, and don't shoot me when i miss something obvious.
    I came across a 'performance?'-issue (slow exporting) for which i don't really know how to find the solution. I've been struggling with it for a while.
    Your (any) help or insight is greatly appreciated!
    My system:
    Windows 7 Professional - 64 bit (Service Pack 1)
    RAM 20 GB
    Intel Core I73770 (dual quad core)
    Direct x 11.0
    Nvidia NVS 310
    Adobe premiere pro CS6 (upgrading to adobe CC is unfortunately not an option)
    Adobe media encoder CS6
    They asked me to edit some video's on a regular basis, nothing complicated, just a 'training'-video. Length of video is about 2 hours edited.
    File info:
    Source file is 1920x1080 (1,0), 25fps, Upper, 2:11:10:24, 48000Hz, Stereo
    There is one audio channel (left is standard mic, right is a shotgun mic) which is split to two audio channels, edited in aodbe audition (basic noise reduction)
    I've been running into export times of over 12 hours (exported to mp4), which i'm guessing is a bit much.. . The slowness is also occuring with other export settings.
    I came across a possible solution (in short: changing the Video Rendering and Playback in the project settings of APP) but that field is inactive for me...? what's up?
    "Use Preview Files" works in CS5.5 but is "Useless" in CS6
    I don't really know what to do from here, to figure out the solution. Any suggestions on fixing or troubleshooting the extremely long export times??
    Thx in advance.

    Dual video problems - Do you have dual graphics adapters?
    IF YES, read below
    -http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
    -http://forums.adobe.com/thread/1001579
    -Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
    -link to why http://forums.adobe.com/message/4685328
    -http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2
    -Mac Utility for dual adapters http://forums.adobe.com/thread/1017891?tstart=0

  • Building mega 865 pro pc...

    hey..
    i've just bought my brand new mega 865 pro and havn't got a clue what to put inside it..
    i think i'll go for the pentium 4 3.0ghz.. but after that, i'm not sure what is compatible with it..
    need 512mb ram.. basic stuff (what's compatible??)
    don't need a gfx card or sound card..
    would need about a 200gig hd.. (should i get SATA?.. what's the difference?)
    my biggest worry is the dvd-rw and tv card as i heard many are not compatible...
    i would like a basic tv card that can take advantage of all of the built in msi features.. can anybody recommend one?
    thanks,
    all help appreciated,
    scrappy.

    you can't use high density ram in the 865 PRO - it wont boot.
    SATA is the way of the future, might as well go for it. the only real difference at this stage is that the SATA cable is smaller, thinner and better for air flow. (I removed my extra IDE cable as I'm using SATA)
    You shouldnt have any problems with DVD-RW.
    As for the TV card, go digital. forget the MSI TV card that works with the 865  it only does analog. Forget about instant on too. its crap, just use hibernate or S3 standby, it will turn your pc on just as fast.   

  • Mega 865 Pro All in Wonder AGP card question

    Helllo,
    I own Mega 865 Pro, and iam looking to install AGP card that has all the features of video editing instead of buying two cards like Pinnacle and graphic card, so i have been searching and i found All in Wonder series, which has TV tuner as well, has any one tried this before, it would be fun to have HDTV beside all the prevoius features of editing issues all in one card, but iam not sure that the power will be enough, so please iam seeking advice.
    Regards

    Quote from: Stu on 18-March-07, 04:00:21
    as you are using MCE2005, in order to use the TV capture in Media Center, you should be sure that it is supported in MCE
    May you reccomed a card to me that support MCE and has the prevoius features as iam not expert in this matter, beside i have heared that i can upgrade the power supplu toget more than 240 watts as thats what i get normally from MEga 865 pro, is that possible to upgrade the power supply? because most new cards needs from 350 watts and above
    Regards

  • I need help Mega 865 pro still restart by itself

    I bought Mega 865 pro last month. I already have install XP pro (very hard to install). In during install It's restart many time and then Mega865 pro do reinstall and complete by itself. I'm wordering because I think It can install so I shut down it. However, in the morning of the next day I try to re-open windows XP, so It can startup. However, I didn't install Instanton program, just driver install. Also, Windows still restart by itself. I'm no idea what the exactly I must do or I need to flash Bios for P4/3.0 GHz 800M LGA775/2M FSB 2MB L2 Cache LGA 775 EM64T   please!!! Help me...How must I do? .... see below my stuff. 
    PS. How do the flash Bios? please explain me .
    Mega PC 865 Pro P4 Home
    CPU: P4/3.0 GHz 800M LGA775/2M FSB 2MB L2 Cache LGA 775 EM64T
    HD 160GB Seagate SATA
    NEC 16X DVD-RW
    RAM : Corsair VS1GB DDR400 PC 3200
    VGA card: MSI RX9600Pro-TD 128 Radeon AGP 8X
    Monitor: Fujiplus 19"

    flashing BIOS is only dangerous if you go blundering in without knowing what you are doing. you know you need to update the BIOS, as long as you read all relevant advices first, then you should have no problems!
    basically you need to copy the BIOS image fie from your CD to a RAMdrive created in memory by a Windows 98SE bootdisk. that avoids the risk of bad floppy or CD read errors. you can find bootdisk images here: www.bootdisk.com

  • Hello applecare  can you help with the macbook pro i did the update the last one and safari doesn't open anything .. what should i do ?

    hello applecare  can you help with the macbook pro i did the update the last one and safari doesn't open anything .. what should i do ?

    Hello John...
    You may have a Safari third party add on installed that was compatible with the previous version of Safari but not 5.1. Try troubleshooting > Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
    FYI... this is a user to user forum. If you can't resolve the issue, information for contacting AppleCare  here.

  • Need help with my iPhone 5 and my Macbook Pro.

    Need help with my iPhone 5 and my Macbook Pro.  I was purchased some music on itunes at my mac. Some reason I deleted those music from both on Mac and iPhone 5.  Today, I went to my iPhone iTunes store inside of iCloud to redownload my puchased. But those song won't able to sync back to my iTunes library on my Mac.  Can anyone help me with that ??....
    iPhone 5, iOS 6.0.1

    You've posted to the iTunes Match forum, which your question does not appear to be related to. You'll get better support responses by posting to either the iTunes for Mac or iTunes for Windows forum. Which ever is more appropriate for your situation.

  • Mega 865 pro help

    hello!!!
    i need your help!!,
    i'd like to buy the mega 865 pro. Do you now if it has got a S-video connector on rear panel?

    no, it doesn't
    http://www.msi.com.tw/program/products/slim_pc/slm/pro_slm_detail.php?UID=602

  • Booting Xp with wireless set to gateway on Mega 865 Pro

    Hi Guys,
    Does anyone know how I can set the wireless card up to automatically switch to Gateway mode after XP has booted.
    It goes into Station Mode by default but I can see a setting to say I want it to start in Gateway mode.
    Any Ideas?
    Danny

    Dunno if you allready did, but you need to have the latest BIOS to run Win XP SP2 on the MEGA 865 Pro. When i bought mine, Sp2 wasn't out yet and things worked fine. When i tried installing SP2, everything went fine, untill i boot. Black screen and nothing, after a while MSI released a new BIOS fixing the problem, newest BIOS i think is 1.30
    Mosher

  • Win XP installation failure on MEGA 865 PRO

    I'm fighting with my  MEGA 865pro, Celeron D 341,2x256 RAM, HDD Maxtor 200GB SATA , DVD-RW LG.
    Everything went ok up to the XP installation, i.e. I installed instant-On on an empty disk (it runs and works). Then I boot a Win XP install CD, and it hangs a second after displaying the initial message: "..detecting hardware....". The HDD access led stays on. The same for XP SP1 and SP2. Any BIOS tweaking does not help.
    After XX tries, I found out the SATA HDD is the bad guy, as the XP setup goes ok if I use my old ATA disk, or even if I use both the SATA and the ATA disks.
    Interestingly, Win 2000 installs *without any problems* (but then InstantOn does not boot)!!!  Gentoo and Ubuntu linux work as well.
    I'm trying to install the absolutely standard and ("only") recommended configuration, so what ... :(
    I've seen few posts about this here and there (e.g. https://forum-en.msi.com/index.php?topic=85690.msg616103#msg616103), but no solutions so far :((((
    Thanx
    viz

    Dunno if you allready did, but you need to have the latest BIOS to run Win XP SP2 on the MEGA 865 Pro. When i bought mine, Sp2 wasn't out yet and things worked fine. When i tried installing SP2, everything went fine, untill i boot. Black screen and nothing, after a while MSI released a new BIOS fixing the problem, newest BIOS i think is 1.30
    Mosher

Maybe you are looking for