Help with Mega PC build

This is my first time to build a PC and its been SUCH a headache.
I purchased the MEGA barebones pc with the P4 socket. I bought everything new (except the TV Card) and put it together. So far... really easy. The CD I received didn't work, so I just found this website and used the auto-updaters for everything. I installed MCE 2005 but I get the same error as some people on here (video card not supported) when I launch Media Center, and then a display error when I try to launch live TV....
Now, I'm not sure which Mega PC I purchased... its the orange one so I'm assuming the 651. Now, I don't know a whole lot about this. Is the VGA card SiS? I've read in two places to use NVidea drivers... and that it could be because the card isn't DirectX9... and that its because SiS doesn't make MCE compatible drivers... and... and... and...
Does it ACTUALLY mean the video card isn't supported? Or is it talking about the tuner card? My other Media Center PC (HP) said the same thing when I installed the new tuner card and all I had to do was update the drivers for it.
Because of the problems, I uninstalled everything and downloaded the drivers for the video card, sound, and ethernet directly from the manufacturer's sites... but MCE still doesn't work.
In the CMOS I changed the video to 64MB (as referenced in yet another thread) and that didn't seem to make any difference. When I run the Media Center Diagnostics Tool the only place where I'm told my system doesn't pass is Adapter DXVA Deinterlacing. Where can I get this? I downloaded DirectX 9.0 from the Microsoft website and the Diagnostic Tool says that is the version I have, but if the VGA card doesn't support it, would the tool still tell me I have it?
help :-(
Mega PC 651
512 DDR RAM
80 GB HD
P4 1600

you have a Mega 651. the onboard SiS VGA is NOT MCE2005 compatible, so you will need to buy a new AGP VGA card that is. nvidia drivers only work on nvidia graphics chipsets. i had the same problem before when i had a Mega 651, in fact i mentioned this in my "Things to know about Mega 651 sticky", so i fitted a FX5200 with integrated TV-out and it worked a treat.
you don't say what TV card you have but if it is the Mega TV Tuner or TV@nywhere Master, then I'm afraid neither of those is MCE compatible either.
you will need either a analogue tv card with hardware MPEG2 encoder (such as Hauppage PVR series) or a digital DVB-T card which doesn't need a hardware MPEG encoder, as the stream is already in MPEG2 format.
i noticed that MSI have launched two new TV cards (see the sticky in the TV@nywhere forum), but i'm afraid i don't know much else about them.
hope this helps you!

Similar Messages

Help with connection flash builder 4.5 to remote php database

help with connection flash builder 4.5 to remote php database

Fatal error: require_once() [function.require]: Failed opening required 'Zend/Loader/Autoloader.php' (include_path='.;C:\php5\pear;D:/webserver/apache2/htdocs/ZendFramework/library') in D:\webserver\apache2\htdocs\giga\first-debug\gateway.php on line 27

I need help with the conditional build tag option RoboHelp 10

I need help with the conditional build tag option. I want to apply CBT to content in a topic. I looked at the Help topics and believed that I applied the feature correctly. Howver, it is not working as desired. In the 2nd sentence below I want the text highlighted in blue to only appear for the printed output and the text printed in purple to only appear for the .htm /online output. Please help.
There are common tasks used to manage the folders in the Navigator and the folders
in the BBS Folders Viewer Grid. For more information on these common tasks see Help
and Support in Success Enterprise. click the links below.

Hi there
Using tagging is a two part process.
Part One
You create and apply the tags to the information you wish to control.
Part Two
You create a Build Expression that is used when you generate your output. The Build Expression typically reads something like: NOT Tag1 (or whatever your tag name is)
Then when you generate and use the Build Expression, the information tagged is not included in the build.
Cheers... Rick

Help with MEGA 865 PC

Hi, this is my problem:
I have a Msi Mega 865 Deluxe barebone pc , i also have a Tv tuner card for mega pc ( TV @nyware ) . I have lost the cable that connects the front panel LCD remote control to the Tv tuner card remote input. I need to build a new cable but i don't know the correct position of the pin. I see on the front panel LCD that the first o three pin is numebered PIN1 and the last PIN3 . Also, on the Tv tuner card the pin ( of the remote control input connector ) is numbered from PIN1 to PIN3. The Pin1 on the LCD correspond on the Pin1 on the TV card ? Pin2 -> Pin2 and Pin3 -> Pin3? or the configuration is different?
Please help me!!!
Thancks !!

please help me, i have a mega pc 865 and i lost the cable from the front panel lcd to tv pci card , i also have lost the adapter of the tv tuner card. If you hava mega pc 865 with tv tuner card post the correct pin configuration , i don't know if the front pin1 correspond to the tv tuner card pin 1 and so... . I post a jpg to explain my problem.

Help with Oracle Report Builder and SQL Server2000

Hey guys,
I just installed it Oracle Developer Suite10g with Report Builder and I am trying to use Report builder and wants to connect with SQL Server 2000. The problem that I am running in to is SQL Server 2000 i have is Window Authentication so Does not required to enter user name and password. So how can i connect my report builder to SQL server or is it possible to connect Report builder to SQL server?
Also, I want to create small practice version of database in Oracle how do i do it? what i mean by that is I installed trial version or Oracle developer 10g from www.oracle.com and now trying to get some knowledge with oracle. Could any one can give me some direction in this matter please.
Thank You
Key

Have a look at the reports help for the purpose header and trailer sections. Here is an exert:
"Report sectioning enables you to define multiple layouts in the same report, each with a different target audience, output format, page layout, page size, or orientation. You can define up to three report sections, each with a body area and a margin area: the names of the sections are Header, Main, and Trailer. By default, a report is defined in the Main section. In the other sections, you can define different layouts, rather than creating multiple separate reports. If you wish, you can use the margin and body of the Header and Trailer sections to create a Header and Trailer page for your reports."

Help with flex4unit ant build.xml: Socket timeout waiting for flexunit report

I'm having trouble setting up ant to build and test my project locally and I'm not sure what the next step is.
Info:
Running on XP/Cygwin.
All of the files that FlexUnit4 references when used in Flash Builder are in my '${basename}/libs' folder (eg FlexUnit4_1.0.swc).
I've placed the flexunit4 task in my ant/libs folder.
I'm getting two errors...
I don't think I've set up the 'socket' stuff right for the tests. It just sits and waits then dies...
[flexunit] Waiting for client connection ...
(about a minute later)
[flexunit] Stopping server ...
[flexunit] End of test data reached, sending acknowledgement to player ...
[flexunit] Closing client connection ...
[flexunit] Closing server on port [1024] ...
BUILD FAILED
java.util.concurrent.ExecutionException: Socket timeout waiting for flexunit report
Plus this is the error I get from the flash player:
ReferenceError: Error #1065: Variable mx.skins.spark::BorderSkin is not defined.
I don't know why it's complaining about Borderskin as I think I have included all the flex4 libs I could find. I suspect this second error is causing the first error?
Any help appreciated. I think I'm just setting it up all wrong.
Screencap of errors:
http://twitpic.com/l7ay8
build.xml:
http://gist.github.com/20804

Finally got everything working using the files from the CI Example which what i probably should have done in the first place.
So a rough guide for anyone just starting out with this:
Download the Flex 4 'workspace' from the digital primates hudson server . This appears to contain flexunit library and examples in various stages of development.
I used Flex Builder 4 Beta 2 to set up my Test Suite and Test Cases.
I then loaded the libs folder from:
workspace.zip\workspace\project\FlexUnit4SampleCIProject
into my flex project's libs folder:
this includes:
FlexUnit4.swc
FlexUnit4CIListener.swc
flexUnit4UIRunner.swc
flexTasks.jar
flexUnitTasks.jar
I didn't need to remove the FlexUnit4 stuff that is 'referenced' automatically by flash builder when you start adding flexunit4 tests/suites.
Then I used a modified version of the TestRunner.mxml found in:
workspace.zip\workspace\project\FlexUnit4SampleCIProject\src\test\flex
The lines to pay attention to are the ones that look like:
static public function currentRunTestSuite():Array {
    var testsToRun:Array = new Array();
    testsToRun.push(packagename.TestSuiteName);
    testsToRun.push(packagename.TestClassName);
    return testsToRun;
Just make sure you update this list to include all of the test suites &/or individual tests you want to run.
I made this a static function and modified the code in the "FlexUnitApplication.mxml" file to use this function so i'd only need to update one list of suites/tests.
FlexUnitApplication.mxml is generated automatically when you run FlexUnit4 tests in the Flash Builder 4 Beta 2 IDE.
This is the build.xml file I'm using in the project:
http://gist.github.com/208211
Change the name of the project from "Flare" to whatever and adjust the other path settings where required (though you might want to write this from scratch at least once so you understand roughly what is going on).
The Debug Flash Player must be installed on the server otherwise you'll get a:
java.util.concurrent.ExecutionException: Socket timeout waiting for flexunit report
...while it waits for the non-existant debugger to attach. (This is obvious but I did forget and was a bit bewildered for a moment)
Need to also ensure the environment variable:FLEX_HOME is set to the location you installed the flex sdk...by editing your .bashrc setting the environment variable the in the Hudson Configuration.
You'll need to point Hudson at your ant installation and your jdk installation. If you downloaded he sdk, be aware you might need to point it to the jdk folder inside the place you installed the sdk.
And I think that's all the problems I had. Hope it's useful to someone... if anyone who actually knows what they are doing can point out any potential issues/better ways of doing things, feel free to comment.
Thanks to Brian (legrosb) and Mike (mlabriola) for their assistance!

Help with Flex Ant build.xml error

So I've started on a new project and I'm new to Flex. A lot of learning curve here. Anyway, I'm trying to deploy a project that uses flex and is built with Ant. We've moving up from a version of Flex 2 to Flex 3. The build file works fine in the Flex 2 app but for some reason does not seem to be working with Flex 3. I'm hoping someone can give me some insight on what might be wrong or where to start.
The error is Command not found: compc
The part of the build file it has a problem with is:
<compc include-classes="${classes}"
     ouput="${flex.dist.dir}/${flex.app.name}.swc"
     keep-generated-actionscript="false"
     headless-server="${headless.server}"
     incremental="true">
<load_config filename="${FLEX_HOME}/frameworks/flex-config.xml" />
<source-path path-element="${FLEX_HOME}/frameworks" />
<source-path path-element="${flex.app.root}" />
<compiler.library-path dir="${FLEX_HOME}/frameworks" append="true">
     <include name="libs" />
     <include name="../bundles/{local}" />
</compiler.library-path>
<compiler.library-path dir="${flex.app.root}" appent="true">
     <include name="libs" />
</compiler.library-path>
</compc>
Any help at all would be greatly appreciated, thank you.

Sorry, I meant to address that. Yes, since we've moved up to the Flex 3 sdk, we are pointing at a new directory. The old directory was flex_sdk and the new directory is flex_sdk_340.
FLEX_HOME is being set in the build.properties file for local building and then overidden in the build.xml file with this code:
<target name="build">
     <available property="FLEX_HOME" value="/apps/flex_sdk_340" file="/apps/flex_sdk_340" />
     <echo>FLEX_HOME = ${FLEX_HOME}</echo>
     <antcall target="compile" />
</target>
I did notice a warning about not using the available property, so I removed it and just changed what FLEX_HOME was set to in the build.properties file to the server directory. Would mess up local building but regardless it didn't matter because it had no effect on the error being generated. I alos looked a little into the file property of the available tag trying to figure out if that was somehow an issue but I wasn't able to come to any conclusion.
Before the program errors out, it does displayt he echo statement and the value of FLEX_HOME appears to be correct in that it does show /apps/flex_sdk_340.
Thank you so much for your continued help. This is truly frustrating because nothing but a directory name has really changed and yet it stopped working. I can't find any information anywhere on what could be wrong and this is really my last resort.

Help with blank folio builder panel in InDesign CS6?

Hello. I am having the same peoblem that was discussed on February 7th regarding a blank folio builder screen. Mine looks exactly like the image posted during that thread (i.e., no actionable items in the panel... not even hints just empty. This occured as soon as I installed the 8.0.1 unpdate of 7 February.
1. Following the suggestions in the previous thread I uninstalled InDesign using the Adobe cleaner program. I reinstalled InDesign from the Adobe Application Mamager (as I am a Creative Cloud member) and once installed, ran the updates from within InDesign (2.0.6) and reset the preferences. Over the past day I have repeated the cleaner/uninstall/reinstall/update/clear preferences 3 more times. The updates had been about 72MB. Today after loading InDesign I checked for updates and it showed an 8.0.1 update of about 43MB. I tried that. Same results. I'm running the software on a 15" MacBook Pro with up to date OS X software. I have also run the current DPS updates.
Help!

Go to help Menu in InDesign and click on Update. Install DPS Tools. If that does not help, go to http://www.adobe.com/downloads/ and install DPS Tools for InDesign CS6.

Help with Workshop tutorial : building an ejb

Hi, I've been trying to compile a project, with no luck.
Please help!
I have an entity bean and a session bean that references the entity bean. I can compile the entity bean by itself, but when I add the session bean, I'm not able to compile :-( I'm really new to ejbs & java. Please help!
Thanks,
Meera
Here is the error log:
Build project MyEJBProject started.
BUILD STARTED
build:
check-env:
WARNING: Checking to see if there is anything new to build...
no-ejbgen:
run-build:
clean-modules:
removed module 'MyEJBProject.jar'
WARNING: Running EJBGen...
Loading source file C:\Temp\/wlw_MyEJBProject_build/../wlw_ejb_crc//ejbgentemp/Hello\HelloBean.java...
Loading source file C:\Temp\/wlw_MyEJBProject_build/../wlw_ejb_crc//ejbgentemp/Hello\VisitBean.java...
Constructing Javadoc information...
EJBGen 2.16
[Info:] Creating C:\Temp\/wlw_MyEJBProject_build/../wlw_ejb_crc//ejbgentemp\Hello\HelloHome.java
[Info:] Creating C:\Temp\/wlw_MyEJBProject_build/../wlw_ejb_crc//ejbgentemp\Hello\Hello.java
[Info:] Creating C:\Temp\/wlw_MyEJBProject_build/../wlw_ejb_crc//ejbgentemp\Hello\Visit.java
[Info:] Creating C:\Temp\/wlw_MyEJBProject_build/../wlw_ejb_crc//ejbgentemp\Hello\VisitHome.java
[Info:] Creating C:\Temp\/wlw_MyEJBProject_build/../wlw_ejb_crc//ejbgentemp\META-INF\ejb-jar.xml
[Info:] null [Bean] MAKE CLASS NAME G:HelloHome P:Hello N:HelloHome
[Info:] null [Bean] MAKE CLASS NAME G:Hello P:Hello N:Hello
[Info:] null [Bean] MAKE CLASS NAME G:VisitHome P:Hello N:VisitHome
[Info:] null [Bean] MAKE CLASS NAME G:Visit P:Hello N:Visit
[Info:] Creating C:\Temp\/wlw_MyEJBProject_build/../wlw_ejb_crc//ejbgentemp\META-INF\weblogic-ejb-jar.xml
[Info:] Creating C:\Temp\/wlw_MyEJBProject_build/../wlw_ejb_crc//ejbgentemp\META-INF\weblogic-cmp-rdbms-jar.xml
[Info:] Creating C:\Temp\/wlw_MyEJBProject_build/../wlw_ejb_crc//ejbgentemp\ejbgen-build.xml
post-ejbgen:
clean-ejbc:
Copying 10 files to C:\Temp\wlw_MyEJBProject_build
WARNING: EJBGen ok. Compiling...
runjavac:
Compiling 14 source files to C:\Temp\wlw_MyEJBProject_build
C:\Temp\wlw_MyEJBProject_build\Hello\Hello_oztp1s_EOImpl.java:15: cannot resolve symbol
symbol : class Hello
location: interface Hello.Hello
implements Hello.Hello, weblogic.utils.PlatformConstants
^
C:\Temp\wlw_MyEJBProject_build\Hello\Hello_oztp1s_HomeImpl.java:13: cannot resolve symbol
symbol : class HelloHome
location: interface Hello.Hello
implements Hello.HelloHome, weblogic.utils.PlatformConstants
^
C:\Temp\wlw_MyEJBProject_build\Hello\Hello_oztp1s_HomeImpl.java:68: cannot resolve symbol
symbol : class Hello
location: interface Hello.Hello
public Hello.Hello create ()
^
C:\Temp\wlw_MyEJBProject_build\Hello\Visit_cbnl1s_ELOImpl.java:15: cannot resolve symbol
symbol : class Visit
location: interface Hello.Hello
implements Hello.Visit, weblogic.utils.PlatformConstants, java.io.Serializable
^
C:\Temp\wlw_MyEJBProject_build\Hello\Visit_cbnl1s_Intf.java:33: cannot resolve symbol
symbol : class Visit_cbnl1s_Intf
location: interface Hello.Hello
(java.sql.ResultSet rs, java.lang.Integer offset, Object __WL_pk, Hello.Visit_cbnl1s_Intf var)
^
C:\Temp\wlw_MyEJBProject_build\Hello\Visit_cbnl1s_LocalHomeImpl.java:13: cannot resolve symbol
symbol : class VisitHome
location: interface Hello.Hello
implements Hello.VisitHome, weblogic.utils.PlatformConstants
^
C:\Temp\wlw_MyEJBProject_build\Hello\Visit_cbnl1s_LocalHomeImpl.java:70: cannot resolve symbol
symbol : class Visit
location: interface Hello.Hello
public Hello.Visit create (java.lang.String arg0)
^
C:\Temp\wlw_MyEJBProject_build\Hello\Visit_cbnl1s_LocalHomeImpl.java:95: cannot resolve symbol
symbol : class Visit
location: interface Hello.Hello
public Hello.Visit findByPrimaryKey(java.lang.String arg0)
^
C:\Temp\wlw_MyEJBProject_build\Hello\Visit_cbnl1s__WebLogic_CMP_RDBMS.java:76: cannot resolve symbol
symbol : class VisitBean
location: interface Hello.Hello
public final class Visit_cbnl1s__WebLogic_CMP_RDBMS extends Hello.VisitBean
^
C:\Temp\wlw_MyEJBProject_build\Hello\Visit_cbnl1s__WebLogic_CMP_RDBMS.java:604: cannot resolve symbol
symbol : class Visit_cbnl1s_Intf
location: interface Hello.Hello
Hello.Visit_cbnl1s_Intf beanIntf)
^
C:\Temp\wlw_MyEJBProject_build\Hello\Hello_oztp1s_HomeImpl.java:72: cannot resolve symbol
symbol : class Hello
location: interface Hello.Hello
return (Hello.Hello) super.create(md_ejbCreate);
^
C:\Temp\wlw_MyEJBProject_build\Hello\Visit_cbnl1s_LocalHomeImpl.java:74: cannot resolve symbol
symbol : class Visit
location: interface Hello.Hello
return (Hello.Visit) super.create(md_ejbCreate_S,
^
C:\Temp\wlw_MyEJBProject_build\Hello\Visit_cbnl1s_LocalHomeImpl.java:99: cannot resolve symbol
symbol : class Visit
location: interface Hello.Hello
return (Hello.Visit)
^
C:\Temp\wlw_MyEJBProject_build\Hello\Visit_cbnl1s__WebLogic_CMP_RDBMS.java:238: cannot resolve symbol
symbol : variable super
location: class Hello.Visit_cbnl1s__WebLogic_CMP_RDBMS
super.setEntityContext(arg0);
^
C:\Temp\wlw_MyEJBProject_build\Hello\Visit_cbnl1s__WebLogic_CMP_RDBMS.java:251: cannot resolve symbol
symbol : variable super
location: class Hello.Visit_cbnl1s__WebLogic_CMP_RDBMS
super.unsetEntityContext();
^
C:\Temp\wlw_MyEJBProject_build\Hello\Visit_cbnl1s__WebLogic_CMP_RDBMS.java:263: cannot resolve symbol
symbol : variable super
location: class Hello.Visit_cbnl1s__WebLogic_CMP_RDBMS
super.ejbActivate();
^
C:\Temp\wlw_MyEJBProject_build\Hello\Visit_cbnl1s__WebLogic_CMP_RDBMS.java:367: cannot resolve symbol
symbol : class Visit_cbnl1s__WebLogic_CMP_RDBMS
location: interface Hello.Hello
Hello.Visit_cbnl1s__WebLogic_CMP_RDBMS __WL_bean = null;
^
C:\Temp\wlw_MyEJBProject_build\Hello\Visit_cbnl1s__WebLogic_CMP_RDBMS.java:443: cannot resolve symbol
symbol : class Visit_cbnl1s__WebLogic_CMP_RDBMS
location: interface Hello.Hello
__WL_bean = (Hello.Visit_cbnl1s__WebLogic_CMP_RDBMS)__WL_pm.getBeanFromRS(__WL_pk, __WL_rsInfo);
^
C:\Temp\wlw_MyEJBProject_build\Hello\Visit_cbnl1s__WebLogic_CMP_RDBMS.java:607: cannot resolve symbol
symbol : class Visit_cbnl1s__WebLogic_CMP_RDBMS
location: interface Hello.Hello
Hello.Visit_cbnl1s__WebLogic_CMP_RDBMS __WL_bean = (Hello.Visit_cbnl1s__WebLogic_CMP_RDBMS)beanIntf;
^
C:\Temp\wlw_MyEJBProject_build\Hello\Visit_cbnl1s__WebLogic_CMP_RDBMS.java:607: cannot resolve symbol
symbol : class Visit_cbnl1s__WebLogic_CMP_RDBMS
location: interface Hello.Hello
Hello.Visit_cbnl1s__WebLogic_CMP_RDBMS __WL_bean = (Hello.Visit_cbnl1s__WebLogic_CMP_RDBMS)beanIntf;
^
C:\Temp\wlw_MyEJBProject_build\Hello\Visit_cbnl1s__WebLogic_CMP_RDBMS.java:733: cannot resolve symbol
symbol : variable super
location: class Hello.Visit_cbnl1s__WebLogic_CMP_RDBMS
super.ejbLoad();
^
C:\Temp\wlw_MyEJBProject_build\Hello\Visit_cbnl1s__WebLogic_CMP_RDBMS.java:747: cannot resolve symbol
symbol : variable super
location: class Hello.Visit_cbnl1s__WebLogic_CMP_RDBMS
super.ejbStore();
^
C:\Temp\wlw_MyEJBProject_build\Hello\Visit_cbnl1s__WebLogic_CMP_RDBMS.java:761: cannot resolve symbol
symbol : variable super
location: class Hello.Visit_cbnl1s__WebLogic_CMP_RDBMS
super.ejbRemove();
^
C:\Temp\wlw_MyEJBProject_build\Hello\Visit_cbnl1s__WebLogic_CMP_RDBMS.java:826: cannot resolve symbol
symbol : class Visit_cbnl1s__WebLogic_CMP_RDBMS
location: interface Hello.Hello
case 0: __WL_loadGroup0FromRS(rs, offset, __WL_pk, (Hello.Visit_cbnl1s__WebLogic_CMP_RDBMS)eb); break;
^
C:\Temp\wlw_MyEJBProject_build\Hello\Visit_cbnl1s__WebLogic_CMP_RDBMS.java:919: reference to + is ambiguous, both method +(java.lang.String,java.lang.String) in and method +(java.lang.String,int) in match
if(__WL_verbose) Debug.say("setting("+this+") 'visitNumber' using column " __WL_num ". Value is " + this.visitNumber);
^
C:\Temp\wlw_MyEJBProject_build\Hello\Visit_cbnl1s__WebLogic_CMP_RDBMS.java:1359: cannot resolve symbol
symbol : variable super
location: class Hello.Visit_cbnl1s__WebLogic_CMP_RDBMS
super.ejbCreate( arg0);
^
C:\Temp\wlw_MyEJBProject_build\Hello\Visit_cbnl1s__WebLogic_CMP_RDBMS.java:1398: cannot resolve symbol
symbol : variable super
location: class Hello.Visit_cbnl1s__WebLogic_CMP_RDBMS
super.ejbPostCreate( arg0);
^
C:\Temp\wlw_MyEJBProject_build\Hello\Visit_cbnl1s__WebLogic_CMP_RDBMS.java:1543: cannot resolve symbol
symbol : variable super
location: class Hello.Visit_cbnl1s__WebLogic_CMP_RDBMS
super.ejbRemove();
^
C:\Temp\wlw_MyEJBProject_build\Hello\Visit_cbnl1s__WebLogic_CMP_RDBMS.java:1603: cannot resolve symbol
symbol : variable super
location: class Hello.Visit_cbnl1s__WebLogic_CMP_RDBMS
super.ejbLoad();
^
C:\Temp\wlw_MyEJBProject_build\Hello\Visit_cbnl1s__WebLogic_CMP_RDBMS.java:1634: cannot resolve symbol
symbol : variable super
location: class Hello.Visit_cbnl1s__WebLogic_CMP_RDBMS
super.ejbStore();
^
C:\Temp\wlw_MyEJBProject_build\Hello\Visit_cbnl1s__WebLogic_CMP_RDBMS.java:1750: cannot resolve symbol
symbol : variable super
location: class Hello.Visit_cbnl1s__WebLogic_CMP_RDBMS
super.ejbPassivate();
^
31 errors
BUILD FAILED
ERROR: Compile failed; see the compiler error output for details.

It seems that the example provided (in the link) requires a web serverNo it doesn't. It requires an HTTP server.
tomcat will be a better option which you can useThe Apache HTTP server might be more to the point.
But If you are new to RMI and need to understand the exact flow of RMI I think this will not be a better exercise to start withI agree. I would get it running without the codebase feature. This isn't as widely used as you might think, and anyway it is a deployment option not something you need to engage with much when developing.
@OP: ignore the HTTP stuff and the codebase feature and build 3 JAR files:
(a) the common stuff (remote interface, stubs if any, and any classes referecned by the remote interface)
(b) the server (the remote object itself and anything server-side it uses)
(c) the client.
The common JAR file should be deployed to both the server and the client, and both the other JARs should name it in their Class-Path entry in the manifest.

Help with my Flash Builder code.

Hello,
I am getting two errors, well four but three are the same. 1083 && 1084.
here is my code, can someone look over it and tell me what I am doing wrong. I am fairley new to Flash Builder so please no harassement.
//Check The Login
                var userName: String= "requestofone";
                var passWord: String= "robots96";
                    if (userName == "requestofone" && passWord == "robots96"){
                    trace("Welcome requestofone")
                    }else{ (userName != "requestofone")
                    trace("User not found. Try again.")
                    }else if{ (passWord != "robots96")
                    trace("Password does not match our records.");
                    //Tire Pressure
                    var frontTires:Array = ['43', '43'];
                    var rearTires:Array = ['45', '45'];
                    if (frontTires:Array != uint: 43 && rearTires:Array != uint: 45){
                        trace("Get Your Tires Checked Out")
                    }else{ (frontTires:Array == uint: 43) && (rearTires:Array == uint:45)
                        trace("Tires pass the spec")}
Description
Location
1083: Syntax error: else is unexpected.
line 48
1084: Syntax error: expecting rightparen before colon.
line 56
1084: Syntax error: expecting rightparen before colon.
line 58
1084: Syntax error: expecting rightparen before colon.
line 58
I have been trying to figure this out for a while now. Please help.

Not to be nasty or "harass", but you need to go back and learn the syntax. Each line of code should end with a semicolon, and I'm also not sure what you are trying to accomplish with your "else{(userName != "requestofone")". Are you trying to do a conditional test? If so you need to use an "else if". That said, the "else if" you do use is incorrect. The parens should come out side the curly braces like you did for the initial "if" condition, and the "else if" needs to come before your final "else" since that is where the flow will go when no previous condition is met.
Example:
if (a == b){
trace("do something");
else if (b == c){
trace("do something different");
else{
trace("do some default thing");
I hope this helps.

Help with mega 865 pro and maxtor sata 6L300S0

i have a mega 865 pro i just install a new HDD model maxtor sata 6L300S0 300 GB and it is very slow on the mega i contact maxtor and they say i have to verify if i have correct SATA driver installed. but everything looks ok on the system. where i can download that driver again? any one can help me?
What im doing wrong?

I'm having the same problem with my Mega 865 pro and my Maxtor 6l200mo (200gb).
Seems to boot up fine, dosn't take any longer to load up startup items than my old system. Though using pretty much any program results in the system pausing and stuttering for a few seconds. I have noticed it most recenltly when watching video files (mpeg/divx). While i'm watching a video, it will keep pausing at random times.....sometimes every 5 seconds....sometimes every 5 mintues. It does the same when i'm not connected to the internet too, and does the same if I am simply playing mp3s or just on the internet! When it seems to do it most is like now! I have an mpeg playing (300mb) in a window, and while I am browsing the internet and even typing this post, it is pausing for a few seconds which is really frustrating! My old system was pretty similar spec to my current Msi system, though it wasn't a barebones system and was slighty lower spec. That worked flawlessly doing the same tasks so my guess is it must be an Ata problem. Another Mega865 gripe that is bugging me!
Any help will be much appreciated. Cheers!
P.s My hd Tach results were pretty much the same as centarlrocks

Camera guy needs help with his first build

Hello all-
I work in a video rental house, and I'm sick of renting out $13,000 cameras and $16,000 lens packages all the time and not having the capability to get the gear for free and make my own projects on my own time! To that end, I'll happily trade any video camera / production knowledge for advice on this build I'm working on.
I’ve put together this modest $3,000 build list for a Premiere CS5 / After Effects CS5 machine. This will be my first build, so I’m somewhat new to this, and I’d like to solicit the board’s input on the following questions:
1)      What do you think of my MOBO / CPU / RAM pairings? I’m not really married to any of these components, and if I should swap any one of these out for overall performance increases, I’d be happy to.
2)      How does my drive setup look? Have I picked any clunkers?
3)      I’d love to hear any alternate suggestions for 20inch or so monitors in the $150 range, or quality desktop speakers in the $100 range.
DISK SETUP- $640
            System / Boot disk – 600 GB Western Digital Velociraptor / SATA 6.0 / 10,000 RPM
            Project / Media disk – (2) x 1TB Samsung Spinpoint F3R / RAID 0 / SATA 3.0 / 7,200 RPM
            Render / Scratch disk – (4) x 500GB Western Digital Caviar blue / RAID 0 / SATA 3.0 / 7,200 RPM
(MOBO raid only- No hardware RAID card – not in my budget right now)
GUTS- $1,137
            CPU- i7-950 Bloomfield 3.06 GHz / Noctura NH-D14 CPU cooler
            GPU- Galaxy NVDIA GTX470 1.28 GB
            RAM- 24GB (6 x 4GB) G.SKILL Ripjaw DDR3 1333 / 9-9-9-24
            MOBO – ASUS Rampage III 1366 pin X58
CASE / POWER - $595
            Case - Silverstone RV02B-W
            PSU – ABS MJ1100-M / 1100 Watt / Single 12v rail
            UPS – Powercom KIN- 2200AP / 2200 VA / 1320 Watts
HUMAN I/O – $485
            Speakers- Behringer MS16
            Mouse – Kensington Expert Trackball
            Keyboard – Logitech Wireless K340
            Monitors – (2) x Acer G235HAbd 23” / 1920x1080 / 20” or larger / around $150
Thanks for any input.
-Leo

Leo,
Nice system specification! Like Harm, I don't have much to suggest - only a comment on the keyboard!
I personally went with the Logitech K800, which is also wireless, after comparing it with the K340 in a store that had both on display. I preferred the feel of this more expensive model and am still very happy with the purchase 6 months later. The K800 also adds backlighting which I love for editing in a dimly lit room.
Jim

Hello i need some help with adobe app builder

i just had an issue where i could not get my app move to app builder said (error could login failed)
now i removede the app builder from applications and are trying to install new one but i cant find it anywhere.

There is a link to download App Builder when you sign in to the DPS Dashboard (http://digitalpublishing.acrobat.com). There is also a link on the DPS install help page.
http://helpx.adobe.com/digital-publishing-suite/help/installing-digital-publishing-tools.h tml

Any help with Graphics/Chart builder PLEASE!!

I am dying here. I have some charts I need to produce and can't for the life of me figure out graphics builder. Can anyone point me in a good direction to a good source for information???
Thanks,
Dia

Hi Dia,
Did you start with the quick tours? If you've lost your program groups, you can find them in:
...\TOOLS\DOC60\us\D2k\Gr\There's six tours - gr1.htm, gr2.htm, ... gr6.htm.
regards,
Stewart

Need help with Campus LAN building design

Hey everyone,
I'm currently studying in a program at College call Internet Communications Technology. I am working on a final project in my Physical layer class. Basically the final project is to design the telecom closets and network infastructure for a 3 level building.
We never really covered the capabilities of certain cisco hardware so I'm looking for a little guidance in what to select.
Basically we have between 300 - 400 people on each level. So we require 1148 cables. We need an additional 134 PoE connections for our phones and WAP's I was going to VLAN each floor and then use VLANS on the floors themselves.
On the main floor we will accept the fiber from the main section of the campus for the internet access and branch that out to the other telecom closets in the building using a single mode fiber cable.
I was taking a look at some gear and this is where I am confused. I will require 1 fiber input from the campus and then I need 3 switches on each floor accepting fiber as there are 3 major areas on each floor. So each end of the floor has an auditorium with 170 people and then the middle.
I was looking at using the Cisco Catalyst 2960-48PST-L - switch - 48 ports - managed - rack-mountable for our access layer switches in the telecom closets at the end... But I'm not really sure what to use for our core/distribution gear so I believe I would need 1 router on the main floor which can do all the interVLAN routing via fiber links between floors but then I would require a router on both floors 2 and 3 for the interVLAN routing on each floor. I would then need 3 main distribution switches on each floor. The switches I'm thinking could be smaller port based like a 12 or 24 port based switch as they would really just be there for accepting the fiber link from the main router on the first floor and branching that to the other telecom closets on the floor.
Just looking for a little guidance here.
Thanks everyone,
Mike

I'd recommend you have a look at the Cisco Smart Business Architecture designs: http://www.cisco.com/en/US/netsol/ns982/networking_solutions_program_home.html#lan
Specifically see the LAN Deployment Guidefor advice on choosing the right type fo switch for the various layers.
As a general guideline, I don't see anyone these days putting in routing away from the core in a campus (nor would I generally recommend it).

Help with Mega PC build

Similar Messages

Maybe you are looking for