Help with merging files and calling SOAP adapter in BPM

Hello All,
I have a scenario, where am merging a header file and item file and calling a webservice in ECC. The requirement is that the no. of calls to the webservice depends on the no. of lines in the header file. Mapping is developed according to this rule and the operation mapping is also set for multiple messages. Testing the mapping produces required results.
But when I run the scenario invoking BPM to merge the files with 2 lines in header records the webservice is called just once. On further analysis into SXMB_MONI_BPE, MESSAGES_OUPUT table in the mapping step has 2 messages. The instance ID of the message gone out shows a checkered flag with processed successfully status, but the second line is stuck in status "Transfer To Process Engine" .
Any thoughts what I should be doing to push second message out automatically.
Prashanth

Hi Prashanth,
   to find out what has happened to the message try checking the workflow log,
i.e., select the message with the 'Transfer to Process Engine" status in SXI_MONITOR and drill down in the outbound PE column.
Once in the workflow log select 'List with Technical Detailsu2019'.
Regards
Kenny

Similar Messages

  • Help with referenced files and importing

    This might be more complex than can be addressed here, but I'm struggling with the organization of aperture.
    Because I'm not sure I want use aperture forever, and because I occasionally like to use other photo editors, I've opted for a referenced file setup. I typically arrange my pictures into year/month sub folders, with additional folders for special subjects, like my kids. I've been doing this for a long time, it works for me, and I don't want to change.
    Problem #1 - avoiding duplicates when I import. When I stick the card in my computer I want to copy just the new files to the directory I specify. Image capture only looks for duplicates in the target directory, which is no help if I'm importing files to "November" from a card that has files that were previously imported to "October." The easiest solution would be to delete the images off of the card after importing, but I can't do that - my wife also wants to copy the pix to her computer and she may not copy for several weeks or months at a time.
    I tried using aperture's import feature to copy files directly from my camera's memory card. The import worked, but when I tried to locate the files on disk, aperture told me there were no referenced files. Any idea where they are?
    Problem #2 - import. Is there any way to make Aperture watch referenced directories and automatically add new files to the the appropriate project? It's a pain to keep manually importing files.
    Problem #3 - Organization. Is there any way to set up aperture so that a project = a physical folder on my drive? I get that Aperture is trying to abstract the physical location of my files, but I don't want them abstracted. Also, why is my aperture primary library 6.2 GB when I do all my work with referenced files? Where are my edited files stored? Are these in the primary library? Where are the files from my photostreams (from my phone) stored?
    Would any or all of these issues be resolved by moving to a managed file set up?
    Finally, if I can't get Aperture working the way I need it, any insight into how I'd use it as an external editor to something like Picasa? I really like the aperture editing tools - that's why I bought it. But the workflow is just killing me.
    Any insights would be appreciated. Thanks.

    It is not as complex as you are making it.  Aperture is not per se an editor.  It is for storing and organizing, and quickly decoding RAW images.  It is a pretty good editor, but it has the feature to allow you to specify an External Editor to which you can send images for more complex editing, and back -- all from within Aperture.
    You don't want to have your images referenced so you can also edit them with other programs.  That destroys the non destructive design of Aperture.  If you want Referenced images, you mostly want them so they can be on a different hard drive from that used by the Library for keeping track and storing the adjustments, and not so other programs can access them.
    You need to read further as to how and why Aperture works the way it does.
    Ernie

  • Help with RAW files and custom white balance.

    ive long had this issue with RAW shooting and adobe photoshop and lightroom, my main subject is a saltwater reef aquarium that is lit by artificial lighting, i shoot canon and use the custom white balance setting to get everything looking proper and it works good.. to an extent.. if i shoot jpg the photos all turn out as shot, if i shoot RAW the white balance in adobe programs is totally messed up and you cant fix it.. if i use DPP by canon, its perfect and looks just as shot or just a a jpg would look.. my question is how can i get adobe lilightroom to render my RAW files correctly.
    below are all 3 images, first one was converted and exported to jpg in canon DPP without any adjustments and is what the photo should look like, second has been exported from photoshop, and 3rd i added a link to the actual RAW file. why cant my lightroom interpret these properly?
    heres a link to the actual RAW file
    https://www.dropbox.com/s/5a39ctllwgrem7a/_MG_8971.CR2
    this was a raw converted in canon dpp, and its what the aquarium looks like, and is what the photo should look like. just to note, any other editing or viewing program besides adobe products all render the image correctly.
    this is what photoshop and lightroom do to my Raw files, theres no way to adjust anything to get even remotely close to correct..

    The white-balance Temperature of this image as computed by the camera is way beyond the 50,000K upper limit as you can see when you open the file in LR or ACR, so Adobe cannot reach the As Shot WB temperature number and stops at 50,000K which is still too blue -- although EXIFtool says:  Color Temp As Shot : 10900, so maybe Adobe's wildly high 50,000K number is based on a faulty camera profile that exaggerates blues:
    However, using the Camera Standard makes things not nearly so garish blue, and it is possible to use Photoshop to neutralize things even more:
    However, as you say, other raw converters do ok with this image despite the high WB temperature, so I think the Canon T3/1100D profile needs some work, but probably won't get it since it is not a high-end camera.
    For example, here is the default conversion from LibRaw that is part of RawDigger, and in my opinion is an improvement on the camera rendering though perhaps lacks a bit of saturation:
    As another example, here is RawTherapee's conversion, after I neutralized the auto-tone and color values it applies by default, and appears to be a bit too saturated but that could be easily adjusted:
    I would agree that Adobe is doing something wrong with this camera in this lighting.  A clue is the bright green color of the top-central coral which seems to be yellow in the non-Adobe renderings.

  • HELP WITH VIDEO FILES AND PUTTING ON ITUNESSS!!!!!!!!!!

    hey...i need help with my video ipod and itunes....i recently had sum problem with my ipod and i had to restore it...and when i hooked it up to itunes all the songs got back on it...its just that the videos never got updated with the songs....the videos are converted and were workin fine....now when i select the folder to put it into the itunes it says processing and nuttin happens...this is drivin me crazy anyone know how to fix this ****??
    THX
    5g ipod video    

    ok...i just uninstalled itunes and installed the previous version...and it worked fine....

  • Can someone help with Merging Files

    Why can't I merge folders ike it says in Help under Folder Basics.
    "Merge two folders
    If you have two folders with identical names at two different locations, you can merge them into a single folder. To do so, you must copy (not move) one folder to the location that already contains a folder with the same name. In the dialog that appears, click Merge.
    The Merge option appears only if one of the folders contains items that are not in the other folder. If the folders contain different versions of identically named files, the only options are Stop or Replace."
    yes they are named identically.
    yes they contain some files that are the same and some that are not the same.
    yes some of the same files in each folder are the same versions and some are not the same versions
    Running osx 10.9.2.
    Does having the location on two different Hard Drives make any difference? The help does not mention that being a problem.

    I suspect you may need to do the usual 'keyboard mashing' to make OS X copy (not move) the folders in question.
    Try the usual modifiers, command, alt, ctrl (and combinations of them) as you drag until you get the indication a move will happen. I think alt will do it (that shows a green icon on the dragged file/folder).
    Does this help make it any clearer…
    http://www.switchingtomac.com/tutorials/osx/understanding-replace-replace-merge- os-x-mavericks/
    P.S. copy is the default behavior across different volumes.

  • Help with Lost Files and Previews!

    Hi all!
    I'm in a bit of a panic. I imported a folder into Lightroom and made standard previews.
    I have large standard sized previews (and some 1:1 previews) on top of my mini thumbnails.
    The I did something very very stupid... I accidentally deleted my original photos!!!!
    The original photos are gone for good (yes, I stupidly emptied the trash).
    Of course it's now appearing in Red in my Lightroom library.
    So here's the help I need.... I still have the large standard size previews in Lightroom. It's not as big as my original files but it's better than nothing!
    How can I convert my existing previews into JPG files? I tried Exporting the files, but Lightroom returns an error. It seems to look for the original files.
    Is there a way for me to pull out and save these standard previews?
    Thanks!
    Leo

    What kind of computer are you on? If you haven't done much with your computer since and your disk is not nearly full, you may be able to retrieve them.
    If it's windows, I've used freeundelete:
    http://www.pcworld.com/downloads/file/fid,25465-order,1-page,1-c,alldownloads/description. html
    There is a thread about getting the previews but I don't remember the details.
    And after you do those two things, it's time to review your procedures. Like don't delete the files from your camera card UNTIL you do a backup? Which LR can do if you like.

  • Help with .h2p files and converting them

    I recently purchessed a group of loops. They downloaded in a format called .h2p. I converted one to a .wav file hoping it would open in garageband. I have read online that these files are only read by Deva. Is there a way to convert them so that they arent just for deva into .wav or .mp3 files? When I changed it from .h2p to .wav garageband said that Error -36 had occured. Please help! Thanks. FYI: I am really bad at computers and stuff like it so pretend I'm stupid. ;-)

    A quick google search gave me [url http://neptune.netcomp.monash.edu.au/JavaHelp/howto/jar.htm]this website about jars.

  • Help with jar files and running them

    I have been trying to figure out how to run executable java files, now I have heard that a million and one people have asked this already. Though when I see the answer to these questions I am still quite confused, I would like to understand some things. First thing is how do you even save your java code as a jar file. Secondly, what is a jar file. Thirdly, I have seen many people talking about batch files, what are they? And finally, I have used many "wrappers" and I still cannot get it to work. Plz help

    A quick google search gave me [url http://neptune.netcomp.monash.edu.au/JavaHelp/howto/jar.htm]this website about jars.

  • Please help with RTAV files and Telecini import

    Hello,
    I am trying to archive old 16mm films. I purchased a telecini and i am importing in to a Panasonic DVD video recorder and burning on to DVD. I am not sure this is important. The challenge I have is that when I put the DVD in my Powerbook g4 it opens the DVD and reads as a RTAV file. When I open the RTAV file the file is empty. I have never experienced this before and I don't even know what an RTAV file is. Please excuse my ignorance if this is basic.
    The second question I have is....I would like to import from the telecini directly in to Imove. My powerbook does not recognize the telecini which I expected. I think I need software to recognize the telecini and bridge to Imovie. Any suggestions?
    Thanks!!!
    Carla

    welcome Carla to the  iMovie boards..
    your question stumbles into some hurdles.. :
    The Panasonic dvd-corder is one of the rare devices, which allow aside the 'standard' dvd-r/w usage of socalled DVD-Ram.. which creates RTAV files.. and which are NOT readable by your Mac (=empty) ..
    so, to solve your rtav problem, use 'normal' dvd-r/+r/-rw or +rw .. (I like re-writable disks for 'transport' issues.. after transfer, erase and re-use them) ...
    I guess, your telecini (cozy name ) device offers an analogue output.. if you have a manufacturers site url, post it here, maybe we find some additional info .. if so, you need a converter device, whch converts from analogue to digital.. there are some devices, Canopus, EyeTV which are supported by iM ...
    finally: I would let do the conversion by some professional service, which allows 'transfer' to miniDV .. best quality and best compatibility..
    ahh, forgot to mention: and if you use dvd-r in your Panasonic instead of DVD-Ram, to convert such stuff, the usual reply is....... :
    DVDs are in a socalled delivery format (mpeg2), which isn't meant and made for any processing as editing...
    for using the iLife apps, you have to convert'em first, in recommended order, choose one of the following tools/workarounds:
    DVDxDV (free trial, 25$, Pro: 90$)
    Apple mpeg2 plugin (19$) + Streamclip (free)
    VisualHub (23.32$)
    Drop2DV (free, requires installation of ffmpeg parts, google for it...)
    Cinematize >60$
    Mpeg2Works >25$ + Apple plug-in
    Toast 6/7/8 allows converting to dv/insert dvd, hit apple-k
    connect a miniDV Camcorder with analogue input to a DVD-player and transfer disk to tape/use as converter
    http://danslagle.com/mac/iMovie/tips_tricks/6010.shtml
    http://danslagle.com/mac/iMovie/tips_tricks/6018.shtml
    http://karsten.schluter.googlepages.com/convertdvdstodvs
    none of these methods or tools override copy protection/DRM mechanisms.. advice on 'ripping' is a violation of the ToU of this board ..
    +be nice to copy rights ...+

  • Help with text messages and calls--urgent and annoying :-/

    Hello: I have an 8350i on the Sprint/Nextel network. Latest issues include what seems to be a dump of my text messages--yesterday received a batch at 5:38pm that had been sent at 9:49am, 10am, 11:27am, noon, 2pm, 2:15pm and then another batch last night at 9:08pm that had been sent at 7:31pm, 8:47pm, and again this morning a batch that arrived at just before 7am that had been sent about 2 hours before. And it's not all the time, or just certain messages. Very frustrating.
    Second issue is that I discoverd that neither my husband or I am able to call my office landline. Colleagues seem to have no trouble.
    Any thoughts out there? Thanks!

    Text message delays are a carrier issue, I would contact sprint and see if there was maintenance in the area or other outages.  Quick fix, you can try to pull the battery out while the device is still on and time it for 2 minutes.  This refreshes your connection and it may work properly after that.  Also, calling other numbers is a carrier issue also.

  • Need help to start with some file and text manipulation

    Hello script mavens,
    I need help with starting a script that does the following:
    -within a base folder it takes an inventory (list?) of all the files (which happen to be image files).
    -creates a new folder inside the base folder and calls it imagesX where X increases by one every time the script is run
    -moves all the files into the images folder
    -within the base folder it creates a new text file and calls it imagesX.js
    -writes a "//-" into imagesX.js
    -then writes the list of filenames into the imagesX.js twice, separated by an empty line, and adds a semicolon to the end of each filename and saves imagesX.js
    -from a folder a level above the base folder it copies a file called index.html into the base folder and renames in indexX.html
    -in indexX.html it replaces a string "replaceThis" with "imagesX.js"
    The task is more complex but this would help me tremendously do the rest.
    If I am asking for too much on this forum please let me know

    This should get you started.
    The description of how you want to write the data isn't clear, but the rest should work (untested):
    property imageNum : 0 -- last used ImageNumber
    -- within a base folder it takes an inventory (list?) of all the files (which happen to be image files).
    -- get the folder:
    set baseFolder to (choose folder)
    -- now get the files within it:
    tell application "Finder"
    set fileList to every file of folder baseFolder as alias list
    end tell
    --creates a new folder inside the base folder and calls it imagesX where X increases by one every time the script is run
    tell application "Finder"
    set imageNum to imageNum + 1
    set newImageFolder to make new folder at baseFolder with properties {name:"images" & imageNum}
    -- moves all the files into the images folder
    move every file of folder baseFolder to newImageFolder
    --within the base folder it creates a new text file and calls it imagesX.js
    set textFile to (open for access file (baseFolder as text) & "images" & imageNum & ".js" with write permission)
    --writes a "//-" into imagesX.js
    write "//-" to textFile
    -- then writes the list of filenames into the imagesX.js twice, separated by an empty line, and adds a semicolon to the end of each filename and saves imagesX.js
    -- need more info here
    -- a blank line between each instance of the file name? or all file names, blank line, all file names again?
    -- an example, please
    close access textFile
    --from a folder a level above the base folder it copies a file called index.html into the base folder
    --and renames in indexX.html
    --in indexX.html it replaces a string "replaceThis" with "imagesX.js"
    -- the easiest way of doing this is to read the file and write a new copy with the changes - that's easier than changing it in situ:
    set indexHTML to (read file "index.html" of folder (container of baseFolder))
    set {oldTIDs, my text item delimiters} to {my text item delimiters, "replaceThis"}
    set indexHTML to text items of indexHTML
    set my text item delimiters to "imagesX.js"
    set indexHTML to indexHTML as text
    set my text item delimiters to oldTIDs
    set indexFile to (open for access file ("index" & imageNum & ".html") with write permission)
    write indexHTML to indexFile
    close access indexFile
    end tell

  • What's the phone number I should call for help with my iPhone and ihome dock?

    What's the phone number I should call for help with my iPhone and ihome dock?

    http://www.ihomeaudio.com/support/

  • I have a Macbook Air (july 2012) with OS X 10.8.3  installed.  I have dvds with .vob files and have Quicktime Version 10.2 (603.12).  I can't play the DVDs.  Thereare some features of QT that I like, e.g. precise frame selection and save as .png file-help

    I have a Macbook Air (july 2012) with OS X 10.8.3  installed.  I have dvds with .vob files and have Quicktime Version 10.2 (603.12).  I can't play the DVDs.  There are some features of QT that I like, e.g. precise frame selection and save as .png file-help.  Am I missing some Apple software?  I thought QT for Mountain Lion could convert the .vob files - is there some setting that I have missed?
    Any suggestions that preserves a simple workflow much appreciated.

    arthur wrote:
    Perian is here: Perian - The swiss-army knife of QuickTime® components
    Perian will be retired soon.

  • Can some help with CR2 files ,Ican`t see CR2 files in adobe bridge

    can some help with CR2 files ,I can`t see CR2 files in adobe bridge when I open Adobe Photoshop cs5- help- about plugins- no camera raw plugins. When i go Edit- preference and click on camera raw  shows message that Adobe camera raw plugin cannot be found

    That's strage. Seems that the Camera Raw.8bi file has been moved to different location or has gone corrupt. By any chance did you try to move the camera raw plugin to a custom location?
    Go To "C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS5\File Formats" and look for Camera Raw.8bi file.
    If you have that file there, try to download the updated camera raw plugin from the below location.
    http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5371&fileID=5001
    In case  you ae not able to locate the Camera Raw.8bi file on the above location, then i think you need to re-install PS CS5.
    [Moving the discussion to Photoshop General Discussions Forum]

  • Help with add file name problem with Photoshop CS4

    Frustrating problem: Help with add file name problem with Photoshop CS4. What happens is this. When I am in PS CS4 or CS3 and run the following script it runs fine. When I am in Bridge and go to tools/photoshop/batch and run the same script it runs until it wants interaction with preference.rulerunits. How do I get it to quit doing this so I can run in batch mode? Any help is appreciated. HLower
    Script follows:
    // this script is another variation of the script addTimeStamp.js that is installed with PS7
    //Check if a document is open
    if ( documents.length > 0 )
    var originalRulerUnits = preferences.rulerUnits;
    preferences.rulerUnits = Units.INCHES;
    try
    var docRef = activeDocument;
    // Create a text layer at the front
    var myLayerRef = docRef.artLayers.add();
    myLayerRef.kind = LayerKind.TEXT;
    myLayerRef.name = "Filename";
    var myTextRef = myLayerRef.textItem;
    //Set your parameters below this line
    //If you wish to show the file extension, change the n to y in the line below, if not use n.
    var ShowExtension = "n";
    // Insert any text to appear before the filename, such as your name and copyright info between the quotes.
    //If you do not want extra text, delete between the quotes (but leave the quotes in).
    var TextBefore = "Lower© ";
    // Insert any text to appear after the filename between the quotes.
    //If you do not want extra text, delete between the quotes (but leave the quotes in).
    var TextAfter = " ";
    // Set font size in Points
    myTextRef.size = 10;
    //Set font - use GetFontName.jsx to get exact name
    myTextRef.font = "Arial";
    //Set text colour in RGB values
    var newColor = new SolidColor();
    newColor.rgb.red = 0;
    newColor.rgb.green = 0;
    newColor.rgb.blue = 0;
    myTextRef.color = newColor;
    // Set the position of the text - percentages from left first, then from top.
    myTextRef.position = new Array( 10, 99);
    // Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
    myLayerRef.blendMode = BlendMode.NORMAL;
    // select opacity in percentage
    myLayerRef.opacity = 100;
    // The following code strips the extension and writes tha text layer. fname = file name only
    di=(docRef.name).indexOf(".");
    fname = (docRef.name).substr(0, di);
    //use extension if set
    if ( ShowExtension == "y" )
    fname = docRef.name
    myTextRef.contents = TextBefore + " " + fname + " " + TextAfter;
    catch( e )
    // An error occurred. Restore ruler units, then propagate the error back
    // to the user
    preferences.rulerUnits = originalRulerUnits;
    throw e;
    // Everything went Ok. Restore ruler units
    preferences.rulerUnits = originalRulerUnits;
    else
    alert( "You must have a document open to add the filename!" );

    you might want to try the scripting forum howard:
    http://www.adobeforums.com/webx?13@@.ef7f2cb

Maybe you are looking for