Help with missing files within lightroom
I need help locating the missing files within lightroom. When I click on the question mark to locate the files, it opens up a window and I click locate, and then the files are no longer there. This happens even on files that I have not moved out of lightroom. How can I make all of my files appear as they used to? Thanks so much!
You have to find the photos on your hard disk, somewhere. At this point, Lightroom can't help you because it doesn't know where the photos are. If they haven't been renamed, you can have your operating system search all of your hard disk(s) for a specific photo name. Then, you can reconnect entire folders (or folder hierarchies) via
http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm
Similar Messages
-
Help with missing files in Elements 3
I am not a computer wizard an dI am trying to catalogue my digital photos. I have almost 2,000 photos in Photoshop elements.All the photos are in the browser and I have created folders for each holiday, wedding, graduation etc. and copied photos into them. Suddenly a lot of the photos have a red rectangle on the bottom of them with a jagged line running diagonally across them which I have now learned means that there is a missing file. I have tried to reconnect the missing file following the help program but nothing happens except the 'torch' searching for the file. I can't do anything with these photos, I can't edit them or print them of copy them to a flash drive as back up. All these photos are precious and I can still see the image in teh browser. Have I lost them?
OK I consider myself severely reprimanded!
Sorry to appear dim but all I have ever done is:
1 open photoshop elements
2. take the card out of my camera
3. put it into my computer.
4. click 'get photos'
5.save photos to my browser
6. create new folders as previously described.
Photoshop Elements toolbar has the camera to 'get photos' so that's what I did, I didn't put them anywhere else first and then copy them into there.
The photos in my browser and the copies in my folders all have the 'missing file' icon so I can't drag the folder one back into the browser it just keeps saying 'missing file'. Plus some photos I haven't copied to folders also show the same icon. Can I say goodbye to my photos or are they there somewhere but I just can't find them? I haven't deleted anything. -
Please help with "Missing File" on iMovie 10.0.2!
After importing clips from my GoPro to iMovie 10.0.2, the clips along with others in the same events are not available. The preview screen and thumbnail both say, "Missing File." Many of the clips that are now "missing" were uploaded and edited months ago
Beat markers are not included in iMovie 10. Another nice feature that has gone missing in this upgrade.
-
Help with "Missing Files" message
My blog has been giving me an error message when I open it: "The following errors occurred when trying to open this document", "Missing file 'Pinstripewelcometile-15.jpg". It's one of the background pinstripe graphics for the "formal" theme that has an "x" and a question mark - it's used on all the entry pages. (http://web.me.com/mikejdunlap/Site/BLOG/Entries/2010/4/27ChocablockCookies.html) I've added new pages and republished, but the "number" of the missing graphic keeps changing every time I open iWeb: "welcomepinstripe15.jpg" etc - I think it started at "_9.jpg". I can't "replace" the file or add them again to my page - since it's a template graphic, rather than my own that I can choose in the media browser. How do I get iWeb to put this background image back in the entry pages? Thanks in advance for any help!
UPDATE: I restarted my computer and went through the exact same process outlined above and now it looks like it resolved itself; the error message no longer appears after I turn sync back on. I believe everything is working correctly now. Basically, it looks like the solution is to completely reboot your computer.
-
I had a folder saved on my desktop and it showed in the side bar on lightroom as such. I dragged the folder to the be under "pictures" and suddenly the file just disappeared. I have a Mac and when I search for the file, the folder comes up but instead of having the photo icons it has two icons that say "Lightroom Catalog" and "Lightroom Data." When I click on these nothing happens. Do you know how to help me find the missing photos?
Thanks!Thank you for your reply. Here is the Lightroom folder. Under "desktop" there was a folder entitled "Katie's Baby Shower." I did not want it on my desktop anymore. I wanted it to be saved under "Pictures." I attempted to drag the folder to be under the "Pictures" heading so that it would be in the same location as the "Februrary 2014" folder. When I did this the folder just disappeared.
I can find the folder in Finder under "Pictures" and when I open it it looks like this:
When I open each of these icons it brings me to the Lightroom library screen but says "no pictures found"
Appreciate any help you can provide. Thanks! -
SOMEONE PLEASE HELP WITH MISSING FILES XP PROBLEM
i recently purchased an ipod touch, and all i want to do is get some music on it, and update the firmware, but i cant use itunes, cuz im getting 'there are some files missing' problem.
I swear to god, if i dont get this fixed by the end of the week, im gonna post the latest video on youtube... on how to smash up apple products.
Ive been trying NOT to buy apple products since the first dawn of time, but i do actually like the ipod touch. But, low and behold... the very reason why i never buy apple products has been confirmed!
can someone PLEASE tell me if there is a solid fix for this? i have literally tried EVERYTHING before you ask. im at my wits end.
Using XP home, all updates installed... latest itunes,It will probably help if you'll post the exact error message and when it's occurring. Otherwise we'll just be guessing, not that someone here might not have a good guess. I'm going to guess that this thread might help:
http://discussions.apple.com/thread.jspa?messageID=11161893�
Regards. -
Help with importing files into Lightroom 3.2
Nothing has changed on my Mac for a year, except installing Lightroom 3 two months ago. I have had no issues importing till yesterday. Imported 300 .CR2 files, installed another card into my card reader and it will not import the files from the same camera, same shoot, done same day.
I have tried to copy the files over to my hard drive and import from there. Failed again.
I can open the files in Camera RAW and convert them to PSD files on a different drive and they still will not import from there.
Any suggestions out there/
I am begging to hate LR3 more and more and more every day.Copy the files from your card reader or camera to your Mac then import the files into Lr. You can configure Lr to import where to a new location or leave them were they are.
-
Can some help with CR2 files ,Ican`t see CR2 files in adobe bridge
can some help with CR2 files ,I can`t see CR2 files in adobe bridge when I open Adobe Photoshop cs5- help- about plugins- no camera raw plugins. When i go Edit- preference and click on camera raw shows message that Adobe camera raw plugin cannot be found
That's strage. Seems that the Camera Raw.8bi file has been moved to different location or has gone corrupt. By any chance did you try to move the camera raw plugin to a custom location?
Go To "C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS5\File Formats" and look for Camera Raw.8bi file.
If you have that file there, try to download the updated camera raw plugin from the below location.
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5371&fileID=5001
In case you ae not able to locate the Camera Raw.8bi file on the above location, then i think you need to re-install PS CS5.
[Moving the discussion to Photoshop General Discussions Forum] -
Help with add file name problem with Photoshop CS4
Frustrating problem: Help with add file name problem with Photoshop CS4. What happens is this. When I am in PS CS4 or CS3 and run the following script it runs fine. When I am in Bridge and go to tools/photoshop/batch and run the same script it runs until it wants interaction with preference.rulerunits. How do I get it to quit doing this so I can run in batch mode? Any help is appreciated. HLower
Script follows:
// this script is another variation of the script addTimeStamp.js that is installed with PS7
//Check if a document is open
if ( documents.length > 0 )
var originalRulerUnits = preferences.rulerUnits;
preferences.rulerUnits = Units.INCHES;
try
var docRef = activeDocument;
// Create a text layer at the front
var myLayerRef = docRef.artLayers.add();
myLayerRef.kind = LayerKind.TEXT;
myLayerRef.name = "Filename";
var myTextRef = myLayerRef.textItem;
//Set your parameters below this line
//If you wish to show the file extension, change the n to y in the line below, if not use n.
var ShowExtension = "n";
// Insert any text to appear before the filename, such as your name and copyright info between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextBefore = "Lower© ";
// Insert any text to appear after the filename between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextAfter = " ";
// Set font size in Points
myTextRef.size = 10;
//Set font - use GetFontName.jsx to get exact name
myTextRef.font = "Arial";
//Set text colour in RGB values
var newColor = new SolidColor();
newColor.rgb.red = 0;
newColor.rgb.green = 0;
newColor.rgb.blue = 0;
myTextRef.color = newColor;
// Set the position of the text - percentages from left first, then from top.
myTextRef.position = new Array( 10, 99);
// Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
myLayerRef.blendMode = BlendMode.NORMAL;
// select opacity in percentage
myLayerRef.opacity = 100;
// The following code strips the extension and writes tha text layer. fname = file name only
di=(docRef.name).indexOf(".");
fname = (docRef.name).substr(0, di);
//use extension if set
if ( ShowExtension == "y" )
fname = docRef.name
myTextRef.contents = TextBefore + " " + fname + " " + TextAfter;
catch( e )
// An error occurred. Restore ruler units, then propagate the error back
// to the user
preferences.rulerUnits = originalRulerUnits;
throw e;
// Everything went Ok. Restore ruler units
preferences.rulerUnits = originalRulerUnits;
else
alert( "You must have a document open to add the filename!" );you might want to try the scripting forum howard:
http://www.adobeforums.com/webx?13@@.ef7f2cb -
Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be able to download the srtony adobe.
Adobe - Lightroom : For Macintosh
Hal -
How to fix 'missing files' in Lightroom 4? [was: adobe lightroom 4]
Hi,
I have the scenario whereby all the images, I assumed, on my hard drive were as I imported to my catalogue. but it now appears that all of my images, are showing as previews but some are showing as 'missing files'. Attempts to reconnect are proving futile as the usual click on and find previous file location location point me to the 'c' drive with a request for the file name. On doing this, the 'C' drive doesn't appear to the have file name I require. Have I in-advertately scrubbed something? I have a lot of images of my grandkids, some of which I can delete but there is one particular image of my premature born grandaughter in the hospital I really need to keep.
I can't do any saving, moving of files whilst these question marks are in place, can someone help as this software, is not as user friendly as I first assumed. All I want is a simple walk thru explanation of saving images from a camera and sorting of existing HD files,(many from past shoots on different cameras), to enable me to sort into some kind of format.
Would it be a good idea to completely scrub all of my images from the 'C' hard drive, (I have a backup on my external deskstop drive), and start afresh?
I have a external drive connected to my laptop and all those images are showing ok with no missing file links. It's only the laptop internal drive that is showing the problem.
any help would be a bonus as the online youtbe video instructions don't answer my problem.Thanks Jim for your response,
I will upgrade to 5.3
Kind regardsEut van Berkum
Op woensdag 28 januari 17:04 2015 schreef JimHess <[email protected]> het volgende:
how to open NRW-files in Lightroom 4?I
created by JimHess in Photoshop Lightroom - View the full discussionThe only way to use those files with Lightroom 4 is to convert them to DNG using DNG converter 8.3 or higher. The camera wasn't supported in Lightroom until version 5.3. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7140310#7140310 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7140310#7140310 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Lightroom by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
How do I move images between files within Lightroom 4?
I find I have to move a good many images among files. How can I do this within Lightroom 4? If I have file S, the sending file, with 25 images, how do I send five images from S to R, the recipient file?
From the help file.
Here is the video they refer to http://tv.adobe.com/watch/learn-lightroom-4/import-moving-folders-around-after-the-fact/ -
Locating and reinstalling missing files in Lightroom 1.4 ....
I would like to know how to re-install missing files once you locate a missing folder or set of files, I don't understand what to do next (once you have found the files) in order to put the file back into it's original location so the files will work in Lightroom (i.e. change the "red" wording back into "white wording" in the folder column). Initially I click onto the red word and a"locate missing folder" window pops up indicating the files original location at the bottom of the window. I have tried putting that file back into it's original location but nothing changes in Lightroom.
Also I notice that the file will still be listed in the library so when I have tried to just drag that fie back into Lightroom, I am unable to because a window pops up saying the file is already in the catalog. At which point it ask me if I would like to see that file in the Library. Once I see the file in the library I have to delete it in order to re-install the original file.
EEEEKKKKKS there must be a simpler way than this just to re-locate files and make the work again ????? I have tried finding information in Adobe's support manual for Lightroom but can't seem to find the answer. I have also tried using other sources like Scott Kelby's book on Lightroom.
This seems like such an obvious problem that would occur with all users so I know I must missing or overlooking something here. I love Lightroom but this is one of the little frustrations I have with the program. I wish a better manual came with the program when I bought it......
I would appreciate any help anyone has on this topic..... Wesley Wongfunction(){return A.apply(null,[this].concat($A(arguments)))}
lovetotakepics wrote:
Hi Marc:
Thank you so very much!! Your recommendation worked. I was able to do a complete search of my computer and found that LR actually stored the originals on my external HD. I was able to link the missing photos from there and I am back in business again! Thanks again for the advice......you are a lifesaver!! Still learning the ins and outs of LR, but I'm getting there.
Glad to hear it all worked out ! -
Urgent Help With Connections File Needed Please
Hello All!
I am getting the following error when I attempt to test my
live site. I am testing database connectivity within my site that
is hosted by GoDaddy. All pages are ASP and the database is stored
in the root directory in GoDaddy's folder called "access_db". The
folder has read/write access.
Here is the error:
Microsoft JET Database Engine error '80040e4d'
Cannot start your application. The workgroup information file
is missing or opened exclusively by another user.
/sitename/requestquote/index.asp, line 130
Here is the code from the connections file:
<%
' FileName="Connection_ado_conn_string.htm"
' Type="ADO"
' DesigntimeType="ADO"
' HTTP="false"
' Catalog=""
' Schema=""
Dim MM_connNAME_STRING
MM_connNAME_STRING =
"Provider=Microsoft.Jet.OLEDB.4.0;DataSource=username\access_db\filename.mdb;UserId=usern ame;Password=password;"
%>
The error above refrences "/sitename/requestquote/index.asp,
line 130", and here is the code:
rs_quote.ActiveConnection = MM_connNAME_STRING
Please help.
Thanks - MattSorry Tim? This is Dave. Did you read what said? I'm not
Matt.
Dave
"TC2112" <[email protected]> wrote in message
news:[email protected]...
> It could be, you'd have to check in the control panel to
make sure
> permissions are set to read and write.
> Have you tried changing the path in your connection
string to the GoDaddy
> path and uploading the file?
> The info I posted tells you how to find out what the
path on GoDaddy is.
>
> Tim
>
>
> "Baxter" <baxter(RemoveThe :-)@gtlakes.com> wrote
in message
> news:[email protected]...
> > Tim,
> > Very good reply! I have no experience with GD other
than the complaints
I
> > have read here about connections to databases etc.
I think that if his
> > connection test is ok that it has to be a
permissions issue? What do you
> > think?
> > Dave
> > "TC2112" <[email protected]> wrote in message
> > news:[email protected]...
> >> Hello,
> >>
> >> Sorry if some of this is repetitive in respect
to what others have
> >> advised
> >> in this thread.
> >> It's an answer I gave someone with similar
problems a while ago.
> >> It does answer your question about the
successful path on your local
> > server
> >> being different than the path on GDs server.
> >> There are also instructions on how to find the
path on GD's server if
> > needed
> >> for DNS-Less connection.
> >>
> >>
> >> Option 1:
> >> You can try using a map path function like this
in your connection
> >> string:
> >> access_db is the folder the database is in and
mydatabase.mdb is the
> > access
> >> file.
> >> Substitute your names.
> >>
> >> STRING = "Provider=Microsoft.Jet.OLEDB.4.0;Data
Source=" &
> >> Server.MapPath("access_db") &
"\mydatabase.mdb;User Id=admin;Password="
> >>
> >> -or-
> >>
> >> Option 2:
> >> You could try an OLEDB DSN-Less connection
instead of using a DSN. It's
> > not
> >> hard to do.
> >>
> >> Step 1 is to figure out the location of the
root directory on the
host's
> >> server..That's very easy to do yourself.
> >>
> >> Just make an asp page (I named mine
"findit.asp"), and put the
following
> >> code between the <body> tags, like so:
> >> <body>
> >> <%
> >> Response.Write("The location of this page
is:<br>")
> >>
Response.Write(Request.ServerVariables("PATH_TRANSLATED") &
"<br>")
> >> Response.Write("The location of my root
directory is:<br>")
> >> Response.Write(Server.MapPath("\"))
> >> Response.Write Path
> >> %>
> >> </body>
> >>
> >>
> >> Upload it to the same location as your site's
home page.
> >> Once your new asp page is uploaded, just
navigate to that page in your
> >> browser.
> >>
> >> For a site on GD the "findit.asp" page displays
something like this:
> >>
> >> The location of this page is:
> >> d:\hosting\mysite\findit.asp
> >> The location of my root directory is:
> >> d:\hosting\mysite
> >>
> >> Now that you know the root directory location
on their server, you can
> >> figure out the path to your database.
> >> Let's say that the folder your database is in
is named _private, and
it
> >> happens to be in the root
> >> directory along with your home page.
> >>
> >> Next, just add the database folder name
(_private) and the database
> >> inside's name (mydatabase.mdb) to the root
directory location:
> >>
> >> d:hosting\mysite\_private\mydatabase.mdb
> >>
> >> That's your Data Source path.
> >>
> >> The connection string would look something like
this:
> >>
> >> = "Provider=Microsoft.Jet.OLEDB.4.0;Data
> >>
Source=d:hosting\mysite\_private\mydatabase.mdb;User
ID=;Password=;"
> >>
> >> (the code above may appear wrapped (two lines)
in the forum/ng but it's
> > one
> >> line with no return within)
> >>
> >> IMPORTANT: If you are using a local testing
server, make a copy of your
> >> connection asp page as a backup.
> >> The reason? The connection information you are
going to put in this
file
> >> will only work on the host's server.
> >> Once you upload the new connection.asp page
with the changes for the
> >> host,
> >> you'll need to change your local copy back to
your local connection so
it
> >> will work on
> >> your local testing server.
> >>
> >> Upload to server.
> >>
> >> Please note: From now on, when you upload (or
"put" if you're using DW)
> >> files that refer to your connection asp page
you're going to get a
> >> warning
> >> that your connection asp on the host is
different than your local copy.
> >> Always say "No" to updating it, or you'll
replace the GD DSN-Less
> > connection
> >> with your local one.
> >>
> >>
> >> Did you set the appropriate read/write
permissions on the
> > directory(folder)
> >> your database is in?
> >> You can do that in GD's control panel.
Hosting> Select your site >
Manage
> > to
> >> open it.
> >>
> >> I hope this helps.
> >>
> >> For what it's worth, I only use GD for domain
names now.
> >> I had numerous problems with some sites hosted
there, switched them to
> >> HostMySite and haven't had any.
> >>
> >> Take care,
> >> Tim
> >>
> >>
> >>
> >>
> >>
> >> "Baxter" <baxter(RemoveThe
:-)@gtlakes.com> wrote in message
> >> news:[email protected]...
> >> > Baxter - I get "Connection was Made
Successfully" if connection to
the
> >> > database was made Successfully not sure
what's going on here? When
you
> >> > look
> >> > at your site files in Dreamwerer on the
server is there a folder
named
> >> > access_db? If so is your data base in that
folder? The database needs
> >> > permissions set to read and write to that
file. Have you checked
> >> > permissions
> >> > on the site? does GD give you a control
panel so that you can set the
> >> > permissions your self? I have never used
GD but have seen where
people
> >> > have
> >> > had lots of problems with them when using
a scripting language. I
don't
> >> > know
> >> > what else it could be at this point.
> >> > Dave
> >> > "mtrueblood"
<[email protected]> wrote in message
> >> > news:[email protected]...
> >> >> Baxter - I get "Connection was Made
Successfully" with the
credentials
> >> >> you
> >> > gave
> >> >> me. My site works just fine on my
local machine with
> > access_trueblood.dsn
> >> > (it
> >> >> also worked with the dsn I initally
created for the site). All pages
> >> > display
> >> >> and I get no errors. I think where the
issue may be, now I am
guessing
> >> > here, is
> >> >> that my connection refrences a
database located in the folder
> >> >>
C:\Users\Administrator\Websites\Sitename\access_db, but once I
upload
> > my
> >> > site,
> >> >> the database still sits in access_db,
but the root folder possibly
has
> >> > changed
> >> >> (maybe causing the connection to
fail).
> >> >>
> >> >> Dooza - I don't understand how I can
use "c:myDsnFile.dsn", when
once
> > I
> >> > upload
> >> >> my site, "c:myDsnFile.dsn" would then
not be the location of my dsn.
> >> >> "c:myDsnFile.dsn" refrences a file on
my computer. I am using an
> >> >> online
> >> > hosting
> >> >> company. Am I not understanding you
correctly? See note above. I did
> > use
> >> > your
> >> >> information and got the following
browser error:
> >> >>
> >> >> Microsoft OLE DB Provider for ODBC
Drivers error '80004005'
> >> >> General error: Invalid file dsn ''
> >> >> /sitename/contactus/index.asp, line
130
> >> >>
> >> >> line 130 -
rs_contactus.ActiveConnection = MM_connTrueblood_STRING
> >> >>
> >> >> I am researching on how to do a
dsn-less connection, unless I can
get
> >> > this
> >> >> figured out.
> >> >>
> >> >> Thanks - Matt
> >> >>
> >> >
> >> >
> >>
> >>
> >
> >
>
> -
Help with selecting files from script menu or drag and drop
I found this scale images applescript online. It works great when a bunch of files is dragged on top of the script but I would like it to also work when a folder or group of files is selected in the Finder and I activate it from the scripts menu.
I can't get my on run statement to work. I'm not really an Applescript guy so I'm really just asking if someone can help finish what I started in this on run.
-- save in Script Editor as Application
-- drag files to its icon in Finder
property target_width : 120
property save_folder : ""
on run
tell application "Finder"
activate
set folder_path to quoted form of (POSIX path of (the selection as alias))
set theItems to every file of folder_path
end tell
end run
on open some_items
-- do some set up
tell application "Finder"
-- get the target width, the default answer is the property target_width
set new_width to text returned of ¬
(display dialog "Target width:" default answer target_width ¬
buttons {"OK"} default button "OK")
if new_width as integer > 0 then
set target_width to new_width
end if
-- if the save_folder property has not been set,
-- set it to the folder containing the original image
if save_folder is "" then
set save_folder to ¬
(container of file (item 1 of some_items) as string)
end if
-- get the folder to save the scaled images in,
-- default folder is the property save_folder
set temp_folder to ¬
choose folder with prompt ¬
"Save scaled images in:" default location alias save_folder
set save_folder to temp_folder as string
end tell
-- loop through the images, scale them and save them
repeat with this_item in some_items
try
rescaleand_save(thisitem)
end try
end repeat
tell application "Image Events" to quit
end open
on rescaleand_save(thisitem)
tell application "Finder"
set new_item to save_folder & "scaled." & (name of this_item)
end tell
tell application "Image Events"
launch
-- open the image file
set this_image to open this_item
set typ to this_image's file type
copy dimensions of this_image to {current_width, current_height}
scale this_image by factor (target_width / current_width)
save this_image in new_item as typ
end tell
end rescaleandsaveWhen items are dragged to your script's icon they are passed in to the on open handler, so this triggers:
on open some_items
and the dragged items are passed in as some_items
In contrast, when you double-click on the script, or invoke it via the Script menu, this runs the on run handler:
on run
tell application "Finder"
activate
folder_path to quoted form of (POSIX path of (the selection as alias))
set theItems to every file of folder_path
end tell
end run
However, there's nothing in this block that actually does anything with the selection - you (dangerously) assume that the selection is a folder (you really should check first), and just set theItems to every file in that folder then you exit.
So to do what you want you'll need to edit your run handler to filter the selection and pass files over to the code that does the hard work.
You already have the basis for this - your rescaleandsave() handler, so it's just a matter of identifying the files in the selection and passing those over to that handler:
on run
tell application "Finder"
set cur_selection to (get selection) -- get the selection
repeat with each_item in cur_selection -- iterate through
if class of each_item is folder then -- do we have a folder?
set theFiles to every file of each_item -- if so, get its contents
repeat with each_file in theFiles -- iterate through them
my rescaleand_save(eachfile) -- and process them
end repeat
else if class of each_item is document file then -- do we have a file selected?
my rescaleand_save(eachitem) -- if so, process it
end if
end repeat
end tell
end run
So the idea here is that the run handler gets the selection and works through the (potentially-numerous) items. For each selected item it checks whether its a folder or a file, if its a folder it gets all the files within and passes them to the rescaleandsave handler.
Note that this is not recursive - it won't catch files within folders within folders - since it only looks at the top level of selected folders, but it wouldn't be hard to rework the script to handle that if that's what you need.
Maybe you are looking for
-
I have a project with about 85 slides that was built with Captivate 4. Many of the slides have buttons that jump to other slides for branching within the presentation. On one of the buttons it is jumping to the wrong slide when I deploy it to our LMS
-
How can I sync my ipod with my computer without plugging it in?
I recently bought several songs on itunes on my desktop at home (I own a vista if it's relevant) and went on vacation, forgeting to sync my ipod with my computer. Is there any way I can sync my itouch with itunes without my computer? Message was edit
-
Error evaluation condition in receiver determination
Hi, In XI 3.0 stack 11, for the incoming file, the receivers are determined based on the content of the input data. In the receiver determination the conditions were given for each receiver and it was working fine. Now, all of a sudden, its giving er
-
it is the wine glass that dissapears.
-
Transaction handling in sender JDBC adapter
Hello, In a scenario where a third party application updates a field (counting it up) and we pick up these counts and zero out the field with the sender JDBC adapter, we would like that the third party application is not able to update while the JDBC