Help with missing files

I had a folder saved on my desktop and it showed in the side bar on lightroom as such. I dragged the folder to the be under "pictures" and suddenly the file just disappeared. I have a Mac and when I search for the file, the folder comes up but instead of having the photo icons it has two icons that say "Lightroom Catalog" and "Lightroom Data." When I click on these nothing happens. Do you know how to help me find the missing photos?
Thanks!

Thank you for your reply. Here is the Lightroom folder. Under "desktop" there was a folder entitled "Katie's Baby Shower." I did not want it on my desktop anymore. I wanted it to be saved under "Pictures." I attempted to drag the folder to be under the "Pictures" heading so that it would be in the same location as the "Februrary 2014" folder. When I did this the folder just disappeared.
I can find the folder in Finder under "Pictures" and when I open it it looks like this:
When I open each of these icons it brings me to the Lightroom library screen but says "no pictures found"
Appreciate any help you can provide. Thanks!

Similar Messages

Help with missing files in Elements 3

I am not a computer wizard an dI am trying to catalogue my digital photos. I have almost 2,000 photos in Photoshop elements.All the photos are in the browser and I have created folders for each holiday, wedding, graduation etc. and copied photos into them. Suddenly a lot of the photos have a red rectangle on the bottom of them with a jagged line running diagonally across them which I have now learned means that there is a missing file. I have tried to reconnect the missing file following the help program but nothing happens except the 'torch' searching for the file. I can't do anything with these photos, I can't edit them or print them of copy them to a flash drive as back up. All these photos are precious and I can still see the image in teh browser. Have I lost them?

OK I consider myself severely reprimanded!
Sorry to appear dim but all I have ever done is:
1 open photoshop elements
2. take the card out of my camera
3. put it into my computer.
4. click 'get photos'
5.save photos to my browser
6. create new folders as previously described.
Photoshop Elements toolbar has the camera to 'get photos' so that's what I did, I didn't put them anywhere else first and then copy them into there.
The photos in my browser and the copies in my folders all have the 'missing file' icon so I can't drag the folder one back into the browser it just keeps saying 'missing file'. Plus some photos I haven't copied to folders also show the same icon. Can I say goodbye to my photos or are they there somewhere but I just can't find them? I haven't deleted anything.

Please help with "Missing File" on iMovie 10.0.2!

After importing clips from my GoPro to iMovie 10.0.2, the clips along with others in the same events are not available. The preview screen and thumbnail both say, "Missing File." Many of the clips that are now "missing" were uploaded and edited months ago

Beat markers are not included in iMovie 10. Another nice feature that has gone missing in this upgrade.

Help with "Missing Files" message

My blog has been giving me an error message when I open it: "The following errors occurred when trying to open this document", "Missing file 'Pinstripewelcometile-15.jpg". It's one of the background pinstripe graphics for the "formal" theme that has an "x" and a question mark - it's used on all the entry pages. (http://web.me.com/mikejdunlap/Site/BLOG/Entries/2010/4/27ChocablockCookies.html) I've added new pages and republished, but the "number" of the missing graphic keeps changing every time I open iWeb: "welcomepinstripe15.jpg" etc - I think it started at "_9.jpg". I can't "replace" the file or add them again to my page - since it's a template graphic, rather than my own that I can choose in the media browser. How do I get iWeb to put this background image back in the entry pages? Thanks in advance for any help!

UPDATE: I restarted my computer and went through the exact same process outlined above and now it looks like it resolved itself; the error message no longer appears after I turn sync back on. I believe everything is working correctly now. Basically, it looks like the solution is to completely reboot your computer.

Help with missing files within lightroom

I need help locating the missing files within lightroom. When I click on the question mark to locate the files, it opens up a window and I click locate, and then the files are no longer there. This happens even on files that I have not moved out of lightroom. How can I make all of my files appear as they used to? Thanks so much!

You have to find the photos on your hard disk, somewhere. At this point, Lightroom can't help you because it doesn't know where the photos are. If they haven't been renamed, you can have your operating system search all of your hard disk(s) for a specific photo name. Then, you can reconnect entire folders (or folder hierarchies) via
http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

SOMEONE PLEASE HELP WITH MISSING FILES XP PROBLEM

i recently purchased an ipod touch, and all i want to do is get some music on it, and update the firmware, but i cant use itunes, cuz im getting 'there are some files missing' problem.
I swear to god, if i dont get this fixed by the end of the week, im gonna post the latest video on youtube... on how to smash up apple products.
Ive been trying NOT to buy apple products since the first dawn of time, but i do actually like the ipod touch. But, low and behold... the very reason why i never buy apple products has been confirmed!
can someone PLEASE tell me if there is a solid fix for this? i have literally tried EVERYTHING before you ask. im at my wits end.
Using XP home, all updates installed... latest itunes,

It will probably help if you'll post the exact error message and when it's occurring. Otherwise we'll just be guessing, not that someone here might not have a good guess. I'm going to guess that this thread might help:
http://discussions.apple.com/thread.jspa?messageID=11161893&#11161893
Regards.

Can some help with CR2 files ,Ican`t see CR2 files in adobe bridge

can some help with CR2 files ,I can`t see CR2 files in adobe bridge when I open Adobe Photoshop cs5- help- about plugins- no camera raw plugins. When i go Edit- preference and click on camera raw shows message that Adobe camera raw plugin cannot be found

That's strage. Seems that the Camera Raw.8bi file has been moved to different location or has gone corrupt. By any chance did you try to move the camera raw plugin to a custom location?
Go To "C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS5\File Formats" and look for Camera Raw.8bi file.
If you have that file there, try to download the updated camera raw plugin from the below location.
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5371&fileID=5001
In case you ae not able to locate the Camera Raw.8bi file on the above location, then i think you need to re-install PS CS5.
[Moving the discussion to Photoshop General Discussions Forum]

Help with add file name problem with Photoshop CS4

Frustrating problem: Help with add file name problem with Photoshop CS4. What happens is this. When I am in PS CS4 or CS3 and run the following script it runs fine. When I am in Bridge and go to tools/photoshop/batch and run the same script it runs until it wants interaction with preference.rulerunits. How do I get it to quit doing this so I can run in batch mode? Any help is appreciated. HLower
Script follows:
// this script is another variation of the script addTimeStamp.js that is installed with PS7
//Check if a document is open
if ( documents.length > 0 )
var originalRulerUnits = preferences.rulerUnits;
preferences.rulerUnits = Units.INCHES;
try
var docRef = activeDocument;
// Create a text layer at the front
var myLayerRef = docRef.artLayers.add();
myLayerRef.kind = LayerKind.TEXT;
myLayerRef.name = "Filename";
var myTextRef = myLayerRef.textItem;
//Set your parameters below this line
//If you wish to show the file extension, change the n to y in the line below, if not use n.
var ShowExtension = "n";
// Insert any text to appear before the filename, such as your name and copyright info between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextBefore = "Lower© ";
// Insert any text to appear after the filename between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextAfter = " ";
// Set font size in Points
myTextRef.size = 10;
//Set font - use GetFontName.jsx to get exact name
myTextRef.font = "Arial";
//Set text colour in RGB values
var newColor = new SolidColor();
newColor.rgb.red = 0;
newColor.rgb.green = 0;
newColor.rgb.blue = 0;
myTextRef.color = newColor;
// Set the position of the text - percentages from left first, then from top.
myTextRef.position = new Array( 10, 99);
// Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
myLayerRef.blendMode = BlendMode.NORMAL;
// select opacity in percentage
myLayerRef.opacity = 100;
// The following code strips the extension and writes tha text layer. fname = file name only
di=(docRef.name).indexOf(".");
fname = (docRef.name).substr(0, di);
//use extension if set
if ( ShowExtension == "y" )
fname = docRef.name
myTextRef.contents = TextBefore + " " + fname + " " + TextAfter;
catch( e )
// An error occurred. Restore ruler units, then propagate the error back
// to the user
preferences.rulerUnits = originalRulerUnits;
throw e;
// Everything went Ok. Restore ruler units
preferences.rulerUnits = originalRulerUnits;
else
alert( "You must have a document open to add the filename!" );

you might want to try the scripting forum howard:
http://www.adobeforums.com/webx?13@@.ef7f2cb

Help with .txt files importing / showing

I am working cs4. / as 3.0
I need some help understanding placing text with .txt files.
I have a txt & css file in my site folder.
Do I need to add a line to my script to locate the files in
my site folder?
Any help would be appreciated. thanks
Here is what I have so far.
var fileTxt:String;
var myTextLoader:URLLoader = new URLLoader();
var cssLoader:URLLoader = new URLLoader();
myTextLoader.addEventListener(Event.COMPLETE, onloaded);
myTextLoader.load(new URLRequest("textInfo.txt"));
function onLoaded(e:Event):void {
fileTxt=myTextLoader.data;
callCss();
function callCss():void {
var cssRequest:URLRequest=new URLRequest("stylesSite.css");
cssLoader.addEventListener(Event.COMPLETE, onCss);
cssLoader.load(cssRequest);
function onCss(e:Event):void {
var css:StyleSheet = new StyleSheet();
css.parseCSS(cssLoader.data);
infoText.styleSheet=css;
infoText.wordWrap=true;
infoText.htmlText=fileTxt;
infoScroll.update();

Thanks for the information. Am I missing something or you forgot to actually post a question?
What are the problems you have? What have you tried and how did not it work?
Mike

Can you help with rematching file names

After a computer crash needed to reload my library. When doing this I accidently clicked the option to add track numbers to song names.
Later I was able to locate my iTunes XML from my old PC, however many of the songs (5000 out of 6000) no don't match because the original song name has been changed since my stupid error caused the files names to get the song number in front of them.
Anybody have any tips for matching the filenames back up. In my original library some files had track numbers in front and some did not. How can I match them back up. I'm comfortable programming and modifying the iTunes XML but I can't figure out a good way to list out the contents of my hard drive to do the actual matching.
Tony

Because this forum software is so absolutely USELESS now, you don't get to see the whole of the question in this view. In the other (non-list) view it says:
"can you help with a technical problem with the stereo imagery option ? it won't take out lead vocal in a stereo mp3"
And the answer is that if you can't isolate the vocal in the stereo field, or it is one of these odd ones where it's used inverted polarity in different parts of the stereo signal for the same vocal, then you won't be able to. But without a sample, it's impossible to tell. If you can post a link to one, that might help. It has to be external to this site though - Adobe in their infinite wisdom don't allow the posting of audio files on their audio U2U forum. Helpful, that, isn't it?

Help with Reconnecting Files

Over this past weekend I was moving, via Relocate Masters, large numbers of images from managed status on my MacBook Pro to referenced status on an external drive (an Air Disk, to be precise). This had gone fine for thousands of images, but Sunday night I returned to the computer to find that it was completely locked up in mid-Relocate, and seemed to have been locked up for a while. I'm not sure what happened, but it seemed bad -- I couldn't get to the Force Quit dialog, or anywhere else. I powered down by holding in the power button.
Upon resurrecting things, Aperture would not open the library. Long story shorter, I rebuilt the database and was then able to see the library contents again. But then I noticed that many files were "offline." Digging further, and using the Manage Referenced Files box, I discovered that some 3500 files need to be reconnected.
The Reconnect All button did a little bit of magic for me, but now I've gotten to a point where using Reconnect All only reconnects one file at a time. I was renaming files as I Relocated Masters, and my fear is that this is what has caused the disconnect. *So first,* can anyone tell me that this is what has caused the problem (the problem being my apparent need to now reconnect 3400 files, one-by-one)?
*Second, and more importantly to me, do I have any recourse beyond reconnecting one-by-one?* Again, the problem seems to me to be that the library file expects a file named image.jpg (or whatever), because the change of the file name to greatimage.jpg that occurred during Relocation did not get written to the library file.
Many thanks for all help and suggestions.

Homme dArs wrote:
I hope someone else can join in with a definitive answer to your problem, but I don't believe you will be happy using the configuration you are attempting to set up.
Having Aperture access your images via wireless is going to be very very slow, and any connection problems will be very frustrating. I have even abandoned the idea of using wireless backup of image files because it so slow.
Perhaps someone can help with your immediate problem, but I would strongly suggest you find a way to store your referenced files locally (a firewire drive would be ideal).
Thanks. I certainly appreciate your thought, and before trying it myself, my instinct was the same as yours. That said, until the present problem cropped up, I have to say it has been quite a good solution. My network is 802.11n, and I've noticed no real lag in accessing the files or otherwise using Aperture with a library stored as this is.
But yes, I hope someone is able to help me get these 3400-some files reconnected short of one-by-one.
Thank you for your comments.

Help with moving files

I'm having problems copying data across my network to my new mac mini and i'm looking for some help with how to resolve this issue.
I'm using "Connect to Server' to connect via SMB to a Vista x64 machine that has the files I need to copy. I'm mounting the share as the user that has permissions to the files on the vista client. The connection is fine, but when I start the copy process, I receive an error message about not having the appropriate permissions to copy files and then the entire copy process fails. Here is the exact error message:
Copy
The operation cannot be completed because you do not have sufficient privileges for some of the items.
OK
From the vista machine I have logged in as the same user and I have taken ownership of ALL of the files and folders I'm trying to copy. I also made sure that the folder is shared with EVERYONE having full access (not something I would normally do, but figured it might help this situation). The vista machine is in a workgroup if that makes a difference.
Question 1: how can I do this via command line so that instead of stopping the entire file copy it skips the ones it can't copy and copies the rest of them?
With hundreds of subfolders and thousands of files, I have no idea which ones it is failing to copy making this process quite painful.
I'm also stuck on another basic issue - when I originally connected to the share, I told the OSX machine to remember the password. If I want to reconnect to the share using a different username and different password, how do I get OSX to reprompt me for this information?
Help

You are probably better off using
ditto
In a terminal
man ditto
and read the description and instructions.
Yes, sadly, many copy process when the fail at a file abort the rest of the process. Windows does this as well.

Need help with connecting file inputs to arrays

In this assignment I have a program that will do the following: display a list of names inputed by the user in reverse order, display any names that begin with M or m, and display any names with 5 or more letters. This is all done with arrays.
That was the fun part. The next part requires me to take the names from a Notepad file, them through the arrays and then output them to a second Notepad file.
Here is the original program: (view in full screen so that the code doesn't get jumbled)
import java.io.*;       //Imports the Java library
class progB                    //Defines class
    public static void main (String[] arguments) throws IOException
        BufferedReader keyboard;                                  //<-
        InputStreamReader reader;                                 // Allows the program to
        reader = new InputStreamReader (System.in);               // read the the keyboard
        keyboard = new BufferedReader (reader);                  //<-
        String name;                 //Assigns the name variable which will be parsed into...
        int newnames;               //...the integer variable for the amount of names.
        int order = 0;              //The integer variable that will be used to set the array size
        String[] array;             //Dynamic array (empty)
        System.out.println (" How many names do you want to input?");   //This will get the number that will later define the array
        name = keyboard.readLine ();
        newnames = Integer.parseInt (name);                                         // Converts the String into the Integer variable
        array = new String [newnames];                                               //This defines the size of the array
        DataInput Imp = new DataInputStream (System.in);       //Allows data to be input into the array
        String temp;
        int length;                                                                  //Defines the length of the array for a loop later on
            for (order = 0 ; order < newnames ; order++)                                //<-
            {                                                                           // Takes the inputed names and
                System.out.println (" Please input name ");                            // gives them a number according to
                temp = keyboard.readLine ();                                           // the order they were inputed in
                array [order] = temp;                                                  //<-
            for (order = newnames - 1 ; order >= 0 ; order--)                                //<-
            {                                                                                // Outputs the names in the reverse
                System.out.print (" \n ");                                                   // order that they were inputed
                System.out.println (" Name " + order + " is " + array [order]);             //<-
            for (order = 0 ; order < newnames ; order++)                                  //<-
                if (array [order].startsWith ("M") || array [order].startsWith ("m"))     // Finds and outputs any and all
                {                                                                         // names that begin with M or m
                    System.out.print (" \n ");                                            //
                    System.out.println (array [order] + (" starts with M or m"));         //
                }                                                                         //<-
            for (order = 0 ; order < newnames ; order++)                                            //<-
                length = array [order].length ();                                                   //
                if (length >= 5)                                                                    // Finds and outputs names
                {                                                                                  // with 5 or more letters
                    System.out.print (" \n ");                                                      //
                    System.out.println ("Name " + array [order] + " have 5 or more letters ");      //<-
}The notepad file contains the following names:
jim
laruie
tim
timothy
manny
joseph
matty
amanda
I have tried various methods but the one thing that really gets me is the fact that i can't find a way to connect the names to the arrays. Opening the file with FileInputStream is easy enough but using the names and then outputing them is quite hard. (unless i'm thinking too hard and there really is a simple method)

By "connect", do you just mean you want to put the names into an array?
array[0] = "jim"
array[1] = "laruie"
and so on?
That shouldn't be difficult at all, provided you know how to open a file for reading, and how to read a line of text from it. You can just read the line of text, put it in the array position you want, until the file is exhausted. Then open a file for writing, loop through the array, and write a line.
What part of all that do you need help with?

Help with finding files

I would really appreciate any help on this! I have my itunes library on an external hard drive. The power adapter to that drive failed. I replaced it, but now when I open itunes it doesn't recognize where any of my files are. A friend told me to try to go into Edit>Preferences and find the drive of my hard drive and reset that as where the files are. That didn't work. I can go in manually and click on a song where the window pops up that itunes can't find the file, and I am able to find it and then it will play. But to do that with all files in my library would take forever. Thank you so much for any help!
(I have itunes 8)

Try This. Hold the shift key down, and open iTunes. Do not let up on the shift key until you get a window that asks you to choose a library, or create a new library. If iTunes opens without giving you that choice, just close it and re-open it with the shift key down. Nine times out of Ten it works on the first try. Click "choose a library". You will get another window that allows you to navigate to your hard drive and show iTunes where your music is stored. In a folder called iTunes or iTunes Music, choose "iTunes Library.itl" This should bring back your entire library the way it was when you last used it.

Help with referenced files and importing

This might be more complex than can be addressed here, but I'm struggling with the organization of aperture.
Because I'm not sure I want use aperture forever, and because I occasionally like to use other photo editors, I've opted for a referenced file setup. I typically arrange my pictures into year/month sub folders, with additional folders for special subjects, like my kids. I've been doing this for a long time, it works for me, and I don't want to change.
Problem #1 - avoiding duplicates when I import. When I stick the card in my computer I want to copy just the new files to the directory I specify. Image capture only looks for duplicates in the target directory, which is no help if I'm importing files to "November" from a card that has files that were previously imported to "October." The easiest solution would be to delete the images off of the card after importing, but I can't do that - my wife also wants to copy the pix to her computer and she may not copy for several weeks or months at a time.
I tried using aperture's import feature to copy files directly from my camera's memory card. The import worked, but when I tried to locate the files on disk, aperture told me there were no referenced files. Any idea where they are?
Problem #2 - import. Is there any way to make Aperture watch referenced directories and automatically add new files to the the appropriate project? It's a pain to keep manually importing files.
Problem #3 - Organization. Is there any way to set up aperture so that a project = a physical folder on my drive? I get that Aperture is trying to abstract the physical location of my files, but I don't want them abstracted. Also, why is my aperture primary library 6.2 GB when I do all my work with referenced files? Where are my edited files stored? Are these in the primary library? Where are the files from my photostreams (from my phone) stored?
Would any or all of these issues be resolved by moving to a managed file set up?
Finally, if I can't get Aperture working the way I need it, any insight into how I'd use it as an external editor to something like Picasa? I really like the aperture editing tools - that's why I bought it. But the workflow is just killing me.
Any insights would be appreciated. Thanks.

It is not as complex as you are making it. Aperture is not per se an editor. It is for storing and organizing, and quickly decoding RAW images. It is a pretty good editor, but it has the feature to allow you to specify an External Editor to which you can send images for more complex editing, and back -- all from within Aperture.
You don't want to have your images referenced so you can also edit them with other programs. That destroys the non destructive design of Aperture. If you want Referenced images, you mostly want them so they can be on a different hard drive from that used by the Library for keeping track and storing the adjustments, and not so other programs can access them.
You need to read further as to how and why Aperture works the way it does.
Ernie

Help with missing files

Similar Messages

Maybe you are looking for