Help with MovieClipLoader
I know there's a million posts about this topic (believe me,
I've been through most of them) but there is nothing that seems to
fit my problem. No matter what I do, I cannot get my external swfs
to load into the main swf of my project. I know the key pretty much
lies in the MoveClipLoader class, but I'm also fairly certain that
I'm missing something very important which would and should not
come as a suprise. This is the code I am using in my main swf:
All of my SWFs are in the same folder, but using the absolute
URL made everything fire correctly. Thanks for the help. I do have
another question, though. I've been working under the impression
for some time that you only need to have your files in the same
folder and then just make reference to them. Is this not the case
or is it something specific to the MovieClipLoader class?
Similar Messages
-
Help with MovieClipLoader please :D
Hi,
I have this preloader and in the last frame I want to load
another swf. So, in the last frame on a new layer I put the
following code I found on the net:
var dmcMovieClipLoader = new MovieClipLoader();
dmcMovieClipLoader.loadClip("
http://vague.ahplace.com/sanspreloader.swf",
_root.zone);
The called swf, sanspreloader.swf, is in the same folder
However, it's not working.
I put the path to the fil I wish to load but I don't know if
that _root.zone is right.
Can somebody help me?
Here's the fla just in case:
http://vague.ahplace.com/preloaderAlone.fla
thanksOk so I made another preloader using another tutorial. I
checked it has a Listener. But it's still not working
Why?
The file's here:
http://vague.ahplace.com/preloaderAlone3.fla -
Need help with SWF page transitions please :)
I am having an issue recreating something I have seen on
other flash sites... (For example on 2Advanced.com) It is hard to
explain but I will do my best. I am advanced in design, layout,
tweening, and am a beginner to intermediate action scripter. So
even if your solution is a point in the right direction to some
code I could pick up and noodle around with that would be great.
That having been said, on to the issue, it's a 2 parter:
Part 1:
I have a Master FLA (or SWF) containing navigation that loads
secondary SWF pages into movie clip containers for the 5 additional
pages of the site. These load above the Master movie clip masking
it (Navigation floats above) so the loaded pages are sandwiched in
between.
View page in it's current state here:
http://sky.prohosting.com/tk421808/rwip/gallery_MAIN.html
This works ok right now, but I have the SWFs replacing one
another in one single movie clip container. What I would like to do
is similar to shuffling 5 cards... if you want the 4th card down
you pull it out, it goes to the top and slides over the last
visible card on top. So I would like the first page clicked to
slide in covering the master MC, the second page clicked, to slide
in covering that one, and so on and so forth. This would be easy if
the pages were linear, then I could just stack the movie clips, but
since the user will click out of order I need a way to load one
into MC_2 (on top), Then when another is clicked have the MC_2 SWF
move down a level (Swap MC?) to allow the second to slide in above,
and then delete the movie that has moved down into level one
(Bottom) then have this repeat when another movie is clicked. This
way it will look like the page you clicked is always sliding in
over the one you are leaving.
Part 2:
I have no idea how to do this next part but... I believe it
involves a gotoAndPlay. I would like to have animation in the movie
that is unloading after the button for the next page to load is
clicked... in other words, you have loaded a page, you click on
another link, and before the new external SWF page loads, the
current performs a gotoAndPlay where I have animated some
de-constructing swipes that remove the text, shapes holding the
text, and the image. ONLY THEN does it start to load the movie for
the link it selected. I think what I am trying to ask here is how
does it carry the link through the unloading animation until it's
done and then execute the loading of the new external SWF of the
link they just clicked?
I pray this makes sense... If not I would be happy to explain
further. :) Thanks in advance for any help!>> I have no idea how to do this next part but... I
believe it involves a
gotoAndPlay. I would like to have animation in the movie that
is unloading
after the button for the next page to load is clicked... in
other words,
you
have loaded a page, you click on another link, and before the
new external
SWF
page loads, the current performs a gotoAndPlay where I have
animated some
deconstructing swipes that remove the text, shapes holding
the text and them
the image, and ONLY THEN does it start to load the movie for
the link it
selected. I think what I am trying to ask here is how does it
carry the
link
through the animation until it's done and then execute the
loading of the
external SWF of the link they just clicked?
<<
You don't use frames. I'd probably use Fuse for this - which
is a sequencing
engine. (www.mosessupposes.com) You can call a function when
the sequence is
done animating - using what's known as a callBack function.
That'd be the
best way, IMO.
For part one, you could either place mutliple empty movie
clips, or just
create them using createEmptyMovieClip - which is a MovieClip
method, and
then load your swfs into them with MovieClipLoader. You can
use swapDepths
for layer control, in order to have any given clip move above
another, layer
wise.
Dave -
Head Developer
http://www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/ -
I need help with controlling two .swf's from third.
Hi, thanks for reading!
I need help with controlling two .swf's from third.
I have a problem where I need to use a corporate designed
.swf in a digital signage solution, but have been told by the legal
department that it can not be modified in any way, I also can't
have the source file yada yada. I pulled the .swfs from their
website and I decompiled them to see what I was up against.
The main swf that I need to control is HCIC.swf and the
problem is it starts w/ a preloader, which after loading stops on a
frame that requires user input (button press) on a play button,
before the movie will proceed and play through.
What I have done so far is to create a container swf,
HCIC_container.swf that will act as Target for the HCIC.swf, and
allow me to send actionscript to the file I'm not allowed to
modify.
I managed to get that done with the help of someone on
another forum. It was my hope that the following script would just
start HCIC.swf at a frame past the preloader and play button, and
just play through.
var container:MovieClip = createEmptyMovieClip("container",
getNextHighestDepth());
var mcLoader:MovieClipLoader = new MovieClipLoader();
mcLoader.addListener(this);
mcLoader.loadClip("MCIC.swf", container);
function onLoadInit(mc:MovieClip) {
mc.gotoAndPlay(14);
But unfortunately it didn't solve my problem. Because there
is a media-controller.swf, that is being loaded by HCIC.swf that
has the controls including the play button to start HCIC.swf.
Here's a link to a .zip file with all 3 .swf files, and all 3
.fla files.
http://www.axiscc.com/temp/HCIC.zip
What I need to do is automatically start the HCIC.swf file
bypassing the pre-loader and play button without editing it or the
media-controller.swf in anyway. So all the scripting needs to be
done in HCIC_container.swf.
I know this is confusing, and its difficult to explain, but
if you look at the files it should make sense.
ActionScripting is far from my strong point, so I'm
definitely over my head here.
Thanks for your help.Got my solution on another forum.
http://www.actionscript.org/forums/showthread.php3?t=146827 -
Help with if statement in cursor and for loop to get output
I have the following cursor and and want to use if else statement to get the output. The cursor is working fine. What i need help with is how to use and if else statement to only get the folderrsn that have not been updated in the last 30 days. If you look at the talbe below my select statement is showing folderrs 291631 was updated only 4 days ago and folderrsn 322160 was also updated 4 days ago.
I do not want these two to appear in my result set. So i need to use if else so that my result only shows all folderrsn that havenot been updated in the last 30 days.
Here is my cursor:
/*Cursor for Email procedure. It is working Shows userid and the string
You need to update these folders*/
DECLARE
a_user varchar2(200) := null;
v_assigneduser varchar2(20);
v_folderrsn varchar2(200);
v_emailaddress varchar2(60);
v_subject varchar2(200);
Cursor c IS
SELECT assigneduser, vu.emailaddress, f.folderrsn, trunc(f.indate) AS "IN DATE",
MAX (trunc(fpa.attemptdate)) AS "LAST UPDATE",
trunc(sysdate) - MAX (trunc(fpa.attemptdate)) AS "DAYS PAST"
--MAX (TRUNC (fpa.attemptdate)) - TRUNC (f.indate) AS "NUMBER OF DAYS"
FROM folder f, folderprocess fp, validuser vu, folderprocessattempt fpa
WHERE f.foldertype = 'HJ'
AND f.statuscode NOT IN (20, 40)
AND f.folderrsn = fp.folderrsn
AND fp.processrsn = fpa.processrsn
AND vu.userid = fp.assigneduser
AND vu.statuscode = 1
GROUP BY assigneduser, vu.emailaddress, f.folderrsn, f.indate
ORDER BY fp.assigneduser;
BEGIN
FOR c1 IN c LOOP
IF (c1.assigneduser = v_assigneduser) THEN
dbms_output.put_line(' ' || c1.folderrsn);
else
dbms_output.put(c1.assigneduser ||': ' || 'Overdue Folders:You need to update these folders: Folderrsn: '||c1.folderrsn);
END IF;
a_user := c1.assigneduser;
v_assigneduser := c1.assigneduser;
v_folderrsn := c1.folderrsn;
v_emailaddress := c1.emailaddress;
v_subject := 'Subject: Project for';
END LOOP;
END;
The reason I have included the folowing table is that I want you to see the output from the select statement. that way you can help me do the if statement in the above cursor so that the result will look like this:
emailaddress
Subject: 'Project for ' || V_email || 'not updated in the last 30 days'
v_folderrsn
v_folderrsn
etc
[email protected]......
Subject: 'Project for: ' Jim...'not updated in the last 30 days'
284087
292709
[email protected].....
Subject: 'Project for: ' Kim...'not updated in the last 30 days'
185083
190121
190132
190133
190159
190237
284109
286647
294631
322922
[email protected]....
Subject: 'Project for: Joe...'not updated in the last 30 days'
183332
183336
[email protected]......
Subject: 'Project for: Sam...'not updated in the last 30 days'
183876
183877
183879
183880
183881
183882
183883
183884
183886
183887
183888
This table is to shwo you the select statement output. I want to eliminnate the two days that that are less than 30 days since the last update in the last column.
Assigneduser....Email.........Folderrsn...........indate.............maxattemptdate...days past since last update
JIM......... jim@ aol.com.... 284087............. 9/28/2006.......10/5/2006...........690
JIM......... jim@ aol.com.... 292709............. 3/20/2007.......3/28/2007............516
KIM......... kim@ aol.com.... 185083............. 8/31/2004.......2/9/2006............. 928
KIM...........kim@ aol.com.... 190121............. 2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190132............. 2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190133............. 2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190159............. 2/13/2006.......2/14/2006............923
KIM...........kim@ aol.com.... 190237............. 2/23/2006.......2/23/2006............914
KIM...........kim@ aol.com.... 284109............. 9/28/2006.......9/28/2006............697
KIM...........kim@ aol.com.... 286647............. 11/7/2006.......12/5/2006............629
KIM...........kim@ aol.com.... 294631............. 4/2/2007.........3/4/2008.............174
KIM...........kim@ aol.com.... 322922............. 7/29/2008.......7/29/2008............27
JOE...........joe@ aol.com.... 183332............. 1/28/2004.......4/23/2004............1585
JOE...........joe@ aol.com.... 183336............. 1/28/2004.......3/9/2004.............1630
SAM...........sam@ aol.com....183876.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183877.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183879.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183880.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183881.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183882.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183883.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183884.............3/5/2004.........3/8/2004............ 1631
SAM...........sam@ aol.com....183886.............3/5/2004.........3/8/2004............ 1631
SAM...........sam@ aol.com....183887.............3/5/2004.........3/8/2004............ 1631
SAM...........sam@ aol.com....183888.............3/5/2004.........3/8/2004............ 1631
PAT...........pat@ aol.com.....291630.............2/23/2007.......7/8/2008............ 48
PAT...........pat@ aol.com.....313990.............2/27/2008.......7/28/2008............28
NED...........ned@ aol.com.....190681.............4/4/2006........8/10/2006............746
NED...........ned@ aol.com......95467.............6/14/2006.......11/6/2006............658
NED...........ned@ aol.com......286688.............11/8/2006.......10/3/2007............327
NED...........ned@ aol.com.....291631.............2/23/2007.......8/21/2008............4
NED...........ned@ aol.com.....292111.............3/7/2007.........2/26/2008............181
NED...........ned@ aol.com.....292410.............3/15/2007.......7/22/2008............34
NED...........ned@ aol.com.....299410.............6/27/2007.......2/27/2008............180
NED...........ned@ aol.com.....303790.............9/19/2007.......9/19/2007............341
NED...........ned@ aol.com.....304268.............9/24/2007.......3/3/2008............ 175
NED...........ned@ aol.com.....308228.............12/6/2007.......12/6/2007............263
NED...........ned@ aol.com.....316689.............3/19/2008.......3/19/2008............159
NED...........ned@ aol.com.....316789.............3/20/2008.......3/20/2008............158
NED...........ned@ aol.com.....317528.............3/25/2008.......3/25/2008............153
NED...........ned@ aol.com.....321476.............6/4/2008.........6/17/2008............69
NED...........ned@ aol.com.....322160.............7/3/2008.........8/21/2008............4
MOE...........moe@ aol.com.....184169.............4/5/2004.......12/5/2006............629
[email protected]/27/2004.......3/8/2004............1631
How do I incorporate a if else statement in the above cursor so the two days less than 30 days since last update are not returned. I do not want to send email if the project have been updated within the last 30 days.
Edited by: user4653174 on Aug 25, 2008 2:40 PManalytical functions: http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/functions2a.htm#81409
CASE
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/02_funds.htm#36899
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/04_struc.htm#5997
Incorporating either of these into your query should assist you in returning the desired results. -
I installed Sunbird in one computer and my calendar has all my infos, events, and task that i would like to see on another computer that i just downloaded Sunbird into. Also, is it possible I can access Sunbird on my iphone?
Thank you in advance,Try the forum here - http://forums.mozillazine.org/viewforum.php?f=46 - for help with Sunbird, this forum is for Firefox support.
-
Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance!Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance! -
Help with HP Laser Printer 1200se
HP Support Line,
Really need your assistance. I have tried both contacting HP by phone (told they no longer support our printer via phone help), the tech told me that I needed to contact HP by e-mail for assistance. I then sent an e-mail for assistance and got that reply today, the reply is as follows "Randall, unfortunately, HP does not offer support via e-mail for your product. However many resources are available on the HP web site that may provide the answer to your inquiry. Support is also available via telephone. A list of technical support numbers can be round at the following URL........." The phone numbers listed are the ones I called and the ones that told me I needed to contact the e-mail support for help.
So here I am looking for your help with my issue.
We just bought a new HP Pavillion Slimline Desk Top PC (as our 6 year old HP Pavillion PC died on us). We have 2 HP printers, one (an all-in-one type printer, used maily for copying and printing color, when needed) is connected and it is working fine with the exception of the scanning option (not supported by Windows 7). However we use our Laser Printer for all of our regular prining needs. This is the HP LaserPrinter 1200se, which is about 6 years old but works really well. For this printer we currently only have a parallel connection type cord and there is not a parallel port on the Slimline HP PC. The printer also has the option to connedt a USB cable (we do not currently have this type of cable).
We posed the following two questions:
1. Is the Laser Jet 1200se compatible with Windows 7?
and if this is the case
2. Can we purchase either a) a USC connection cord (generic or do we need a printer specific cord)? or b) is there there a printer cable converter adapater to attach to our parallel cable to convert to a USB connection?
We do not want to purchase the USB cable if Windows 7 will not accept the connection, or if doing this will harm the PC.
We really would appreciate any assitance that you might give us.
Thank you,
Randy and Leslie GibsonSorry, both cannot be enabled by design. That said, devices on a network do not care how others are connected. You can print from a wireless connection to a wired (Ethernet) printer and v/v.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Going to Australia and need help with Power converters
Facts:
US uses 110v on 60hz
Australia 220v on 50hz
Making sure I understood that correctly. Devices I plan on bringing that will use power are PS3 Slim, MacBook Pro 2008 model, and WD 1TB External HDD. My DS, and Cell are charging via USB to save trouble of other cables.
Ideas I've had or thought of:
1. Get a power converter for a US Powerstrip, and then plug in my US items into the strip and then the strip into an AUS Converter into Australian outlet. Not sure if this fixes the voltage/frequency change.
2. Get power converters for all my devices. But, not sure if my devices needs ways of lowering the voltage/increasing frequency or something to help with the adjustment.
3. Buy a universal powerstrip, which is extremely costly and I wouldn't be able to have here in time (I leave Thursday). Unless Best Buy carrys one.godzillafan868 wrote:
Facts:
US uses 110v on 60hz
Australia 220v on 50hz
Making sure I understood that correctly. Devices I plan on bringing that will use power are PS3 Slim, MacBook Pro 2008 model, and WD 1TB External HDD. My DS, and Cell are charging via USB to save trouble of other cables.
Ideas I've had or thought of:
1. Get a power converter for a US Powerstrip, and then plug in my US items into the strip and then the strip into an AUS Converter into Australian outlet. Not sure if this fixes the voltage/frequency change.
2. Get power converters for all my devices. But, not sure if my devices needs ways of lowering the voltage/increasing frequency or something to help with the adjustment.
3. Buy a universal powerstrip, which is extremely costly and I wouldn't be able to have here in time (I leave Thursday). Unless Best Buy carrys one.
Check the specs on input voltage/frequency of your power supplies.
Many laptop power supplies are "universal/global" and are specced something like 80-265 volts AC 50/60 Hz, but not all. These will just need a connector adapter.
Unsure about the PS3 Slim - if it isn't universal it could be difficult as you'll need a 110/220 transformer, one big enough (power-handling wise) for the PS3 will be very bulky.
For the external WD HDD, if it doesn't have a universal supply, you're probably best off just finding a new wallwart for it that is capable of running on 220/50.
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies. -
Creation of context sensitive help with pure FM 12 usage doesn't work
Hi,
I hope somebody is able to help me with a good hint or tip.
I am trying to create a context-sensitive Microsoft Help with FM12 only using the abilities of FM (no RoboHelp). For some reasons, my assigned ID's are not used in the generated chm file and therefore the help does not work context-sensitively.
What did I do?
- I created my FM files and assigned topic aliases to the headers. I did this two ways: a) using the "Special" menue and assigning a CSH marker and/or b) setting a new marker of type "Topic Alias" and typing the ID. I used only numeric IDs like "2000" or "4200",
- I created a .h file (projectname.h) - based on the format of the file projectname_!Generated!.h (I read this in some instructions). So the .h file (text file) looks like this:
#define 2000 2000 /* 4 Anwendungsoberfläche */
#define 2022 2022 /* 4.1.1 Menü Datei */
#define 2030 2030 /* 4.1.3 Menü Parametersatz */
#define 2180 2180 /* 6.6.7 Objektdialog Q-Regler */
#define 2354 2354 /* 6.9.2 Objektdialog Extran Parameter */
#define 2560 2560 /* 6.9.5 Objektdialog Extran2D Parametersatz */
- I published the Microsoft HTML Help. A projectname_!Generated!.h has been created. My IDs were not used in this file:
#define 2000 1
#define 2022 2
#define 2030 3
#define 2180 4
#define 2354 5
#define 2560 6
- When I open the .chm file and look in the source code, the ID even is totally different. It is not the one, I assigned in FM, it is not the one which I assigned in the projectname.h file and it even is not the one, which was put in the projectname_!Generated!.h file. It is a generated name starting with CSH_1 ...n in a consecutive way numbered.
Example:
<p class="FM_Heading1"><a name="XREF_72066_13_Glossar"></a>Gloss<a name="CSH_1"></a>ar</p>
What goes wrong? Why does FM not take my assigned IDs? I need to use these IDs since our programmers are using those already - I had to re-create the whole online help but the programs stay untouched.
Please help!
Many thanks
MohiHi Jeff,
thanks for your note!
The text in my marker is just a number like "2000" or "4200". As said, I created manually a my.h file and used this marker there. E.g.
#define 2000 2000.
Whereby the first 2000 (in my opinion) is the marker text and the second 2000 is the context ID which the programmers are using for the context sensitive call of the help. My definitions in the my.h file were translated to #define 2000 1 (in the my_!Generated!.h file). The source code "translates" the context ID into CSH_8.
I am still confused :-/
Thanks
Mohi -
Need help with Boot Camp and Win 7
I have iMac 27" (iMac11,1) 2.8 GHz, quad core, 8MB of L3, 8GB of Memory, Boot ROM Version IM111.0034.B02 and SMC Version 1.54f36 and can't get this machine to run Windows 7 using Boot Camp. I have successfully loaded Win 7 but when it claims to be starting I only get a black screen after initial start up.
I have checked and rechecked my software updates and have read and reread the instructions, however, I can't update my Boot Camp to 3.1 (my machine says i'm running 3.0.4) and I need 3.1 but can't load 3.1 because it is an exe file that has to be loaded into Windows after I load Windows but can't open Windows because I can't load Boot Camp 3.1. That's my excuse anyway, so I'm missing something I just can't figure out what it is....this is where you come in!
Thanks.
MikeMike,
I'm not going to be much help with Boot Camp however I can direct you to the Boot Camp forum where there are more people that know how to troubleshoot it and Windoze 7. You can find it at:
https://discussions.apple.com/community/windows_software/boot_camp
Roger -
Can some help with CR2 files ,Ican`t see CR2 files in adobe bridge
can some help with CR2 files ,I can`t see CR2 files in adobe bridge when I open Adobe Photoshop cs5- help- about plugins- no camera raw plugins. When i go Edit- preference and click on camera raw shows message that Adobe camera raw plugin cannot be found
That's strage. Seems that the Camera Raw.8bi file has been moved to different location or has gone corrupt. By any chance did you try to move the camera raw plugin to a custom location?
Go To "C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS5\File Formats" and look for Camera Raw.8bi file.
If you have that file there, try to download the updated camera raw plugin from the below location.
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5371&fileID=5001
In case you ae not able to locate the Camera Raw.8bi file on the above location, then i think you need to re-install PS CS5.
[Moving the discussion to Photoshop General Discussions Forum] -
Be grateful for your help with Photoshop Elements which I have been using for several years.
Be grateful for your help with Photoshop Elements which I have been using for several years. Does Elements need to have access to ‘My Pictures’ on Windows as when I remove Photos from ‘My Pictures’, Elements later, when backing up, gives a message that it is unable to ‘reconnect’ to the same picture on elements. On other occasions when removing a photo from Elements catalogue I also get a similar message when backing up saying ‘unable to reconnect’. 1. Is there a relationship between Elements and My Pictures and is Elements dependant on the Windows ‘My Pictures’? 2. Why does some photos in Elements in some cases cause them to multiply e.g. double; triple; quadruple; and on occasions even more? Is there something I need to do to stop this or an easy way I can remove the multiples without spending hours doing it manually one by one? Am I doing something wrong? My O/S is Windows XP SP2 and windows Vista on my Laptop. I have been using Elements 5 and have just purchased Photoshop Elements 8.0. (Upgrade) and about to install it. Be grateful for any advice as I do enjoy using the program if only I can resolve this issue. I am not a PC wiz and mainly use Elements to catalogue photos from which I compile collections and from them slide shows with music. Any advice appreciated Sonny.t PS Have tried to post this previously but without success so hoping to see message appear and a +response
The organizer doesn't care where you send your photos when you download them via the downloader or where they happen to be when you first bring them in if you use the Get Photos command, but once your pics are in the Organizer, you *must* move them from within organizer or it can't find them. You don't have to use My Pictures at all if you don't want to, but regardless of the folder where you put your photos, if you want them someplace else, you use organizer to do it.
-
Query Help with Parent, Child, Child's Child
Hi all,
Need some help with a query. I'm trying to create a stored procedure that is sort of like a Customer, Order, Order, Details. In my situation the tables are different but nevertheless, I want to grab all the fields from the Parent, Child,
and Childs' Child, where the Parent.ParentID = @Parameter. I tried this:
CREATE PROCEDURE [dbo].[spGetCompleteProjectXML]
@ProjectID int = 0
AS
SELECT *,
(SELECT *,
(SELECT *
FROM PageControls
WHERE (PageControls.ProjectPageID = ProjectPages.ProjectPageID))
FROM ProjectPages
WHERE (ProjectPages.ProjectID = @ProjectID))
FROM Projects
WHERE (ProjectID = @ProjectID)
FOR XML AUTO, ELEMENTS
RETURN 0
I think I'm close, but it was my best effort. Could someone help?
thanks in advanceHi TPolo,
Regarding your description, are you looking for a sample like below?
CREATE TABLE customer(customerID INT, name VARCHAR(99))
INSERT INTO customer VALUES(1,'Eric')
INSERT INTO customer VALUES(2,'Nelson')
CREATE TABLE orders(orderID INT,customerID INT)
INSERT INTO orders VALUES(1,1);
INSERT INTO orders VALUES(2,1)
INSERT INTO orders VALUES(3,2)
INSERT INTO orders VALUES(4,2)
CREATE TABLE orderDetails(orderID INT,item VARCHAR(99))
INSERT INTO orderDetails VALUES(1,'APPLE1')
INSERT INTO orderDetails VALUES(1,'BANANA1')
INSERT INTO orderDetails VALUES(2,'APPLE2')
INSERT INTO orderDetails VALUES(2,'BANANA2')
INSERT INTO orderDetails VALUES(3,'APPLE3')
INSERT INTO orderDetails VALUES(3,'BANANA3')
INSERT INTO orderDetails VALUES(4,'APPLE4')
INSERT INTO orderDetails VALUES(4,'BANANA5')
SELECT customer.customerID,customer.name,
(SELECT orderId,
SELECT item FROM orderDetails WHERE orderID=orders.orderID FOR XML AUTO,TYPE,ELEMENTS
FROM orders Where customerID=customer.customerID FOR XML AUTO,TYPE,ELEMENTS)
FROM customer WHERE customerID=1
FOR XML AUTO,ELEMENTS
DROP TABLE customer,orderDetails,orders
If you have any feedback on our support, please click
here.
Eric Zhang
TechNet Community Support -
Hi Gurus,
Can someone please help me out.
I've a below tables.
1) tbl_link --> this table contains information at profile level
2) tbl_summary --> this table contains summary at parent profile level derived from tbl_link table
One parent profile contains multiple child profiles and each child profile links to a code (which is B, W, G or P) and the code is linked to a category (i.e. ONL and OFL). In this case code B is linked to category 'ONL' and codes W,G,P linked to OFL category.
ONL category needs 100 points. If it don't have enough points then i need to borrow from OFL category which i'm doing and populating into tbl_summary table at parent profile level.
Now i need to insert data into tbl_link table at profile level with howmany points used, expired based on tbl_summary table. Rule is at the end of month if we add points for each profile in tbl_link table it should come as 0.
with
tbl_SUMMARY as
select 1 as ppid,'ONL' as catgcode, 53 as earned_points,47 BORROWED_POINTS,100 CERT_POINTS,0 DISCARD_POINTS,100 used from dual
union
select 1 as ppid,'OFL' as catgcode, 223 as earned_points,0 BORROWED_POINTS,176 CERT_POINTS,76 DISCARD_POINTS,100 used from dual
union
select 2 as ppid,'ONL' as catgcode, 39 as earned_points,61 BORROWED_POINTS,100 CERT_POINTS,0 DISCARD_POINTS,100 used from dual
union
select 2 as ppid,'OFL' as catgcode, 90 as earned_points,0 BORROWED_POINTS,29 CERT_POINTS,29 DISCARD_POINTS,100 used from dual
union
select 3 as ppid,'ONL' as catgcode, 109 as earned_points,0 BORROWED_POINTS,109 CERT_POINTS,9 DISCARD_POINTS,100 used from dual
union
select 3 as ppid,'OFL' as catgcode, 223 as earned_points,0 BORROWED_POINTS,223 CERT_POINTS,23 DISCARD_POINTS,200 used from dual
union
select 4 as ppid,'ONL' as catgcode, 109 as earned_points,0 BORROWED_POINTS,109 CERT_POINTS,9 DISCARD_POINTS,100 used from dual
union
select 4 as ppid,'OFL' as catgcode, 169 as earned_points,0 BORROWED_POINTS,169 CERT_POINTS,69 DISCARD_POINTS,100 used from dual
tbl_link as
select 1 as ppid,1 as pid, 'B' as code,'ONL' as catgcode, 53 as earned_points from dual
union
select 1 as ppid,12 as pid, 'W' as code,'OFL' as catgcode, 26 as earned_points from dual
union
select 1 as ppid,13 as pid, 'G' as code,'OFL' as catgcode, 87 as earned_points from dual
union
select 1 as ppid,14 as pid, 'P' as code,'OFL' as catgcode, 110 as earned_points from dual
union
select 2 as ppid,2 as pid, 'B' as code,'ONL' as catgcode, 39 as earned_points from dual
union
select 2 as ppid,22 as pid, 'W' ,'OFL' as catgcode, 30 as earned_points from dual
union
select 2 as ppid,23 as pid, 'G' ,'OFL' as catgcode, 29 as earned_points from dual
union
select 2 as ppid,24 as pid, 'P' ,'OFL' as catgcode, 31 as earned_points from dual
union
select 3 as ppid,3 as pid, 'B' as code,'ONL' as tier_catgcode, 109 as earned_points from dual
union
select 3 as ppid,32 as pid, 'W' ,'OFL' , 26 as earned_points from dual
union
select 3 as ppid,33 as pid, 'G' ,'OFL', 87 as earned_points from dual
union
select 3 as ppid,34 as pid, 'P' ,'OFL' , 110 as earned_points from dual
union
select 4 as ppid,4 as pid, 'B' as code,'ONL' as catgcode, 109 as earned_points from dual
union
select 4 as ppid,42 as pid, 'W' as code,'OFL' , 26 as earned_points from dual
union
select 4 as ppid,43 as pid, 'G' as code,'OFL' , 87 as earned_points from dual
union
select 4 as ppid,44 as pid, 'P' as code,'OFL' , 56 as earned_points from dual
final (PARENT_PROFILE_ID,PROFILE_ID,catgcode,EARNED_POINTS,BORROWED_POINTS,CERT_POINTS,DISCARD_POINTS,USED)
as (
select A.PPID PARENT_PROFILE_ID,B.PID PROFILE_ID,A.catgcode,B.EARNED_POINTS,BORROWED_POINTS,CERT_POINTS,DISCARD_POINTS,USED
from tbl_SUMMARY a,tbl_link b where a.ppid=b.ppid AND A.catgcode=B.catgcode
ORDER BY PROFILE_ID
select * from final order by 1;
PARENT_PROFILE_ID PROFILE_ID CATGCODE EARNED_POINTS BORROWED_POINTS CERT_POINTS DISCARD_POINTS USED
1 1 ONL 53 47 100 0 100
1 14 OFL 110 0 176 76 100
1 13 OFL 87 0 176 76 100
1 12 OFL 26 0 176 76 100
2 2 ONL 39 61 100 0 100
2 24 OFL 31 0 29 29 100
2 23 OFL 29 0 29 29 100
2 22 OFL 30 0 29 29 100
3 32 OFL 26 0 223 23 200
3 33 OFL 87 0 223 23 200
3 34 OFL 110 0 223 23 200
3 3 ONL 109 0 109 9 100
4 42 OFL 26 0 169 69 100
4 43 OFL 87 0 169 69 100
4 44 OFL 56 0 169 69 100
4 4 ONL 109 0 109 9 100
Need Output as below :
For parent profile 1, whatever i mentioned above is not correct. Borrowed 47 points from OFL to ONL to make ONL and also from OFL category has 176 points remaining after lending to ONL and using only 100 points, remaining 76 points are discarded. Need to deduct these 76 points also from child profiles. Output will be as below.
PARENT_PROFILE_ID PROFILE_ID CATGCODE EARNED_POINTS BORROWED_POINTS CERT_POINTS DISCARD_POINTS USED BURN_PTS EXPIRE_PTS
1 1 ONL 53 47 100 0 100 -53 0
1 12 OFL 26 0 176 76 100 -26 0
1 13 OFL 87 0 176 76 100 -74 -13
1 14 OFL 110 0 176 76 100 -47 -63
For parent profile id 2 --> ONL category has 39 points, so borrowed 61 points from OFL category to make ONL points 100.
Now need to populate tbl_link table at child profile level (i.e. child profiles 22,23,24).
Borrowed 61 points from OFL and need to deduct this points from the profile which has highest earned points, in this case deduct from profile 24 which has 31 points, from profile 22 which has 30 points. Need output like below
PARENT_PROFILE_ID PROFILE_ID CATGCODE EARNED_POINTS BORROWED_POINTS CERT_POINTS DISCARD_POINTS USED BURN_PTS EXPIRE_PTS
2 2 ONL 39 61 100 0 100 -39 0
2 22 OFL 30 0 29 29 100 -30 0
2 23 OFL 29 0 29 29 100 0 -29
2 24 OFL 31 0 29 29 100 -31 0
For parent profile id 3 --> ONL category has 109 points, so no need to borrow points from OFL category
Now need to populate tbl_link table at child profile level (i.e. child profiles 32,33,34).
in this case ONL has 100 points, so move the remaining 9 points will be expired. OFL category has 223 points total. need only 200 points (i.e. mutiple of 100) for our process, 23 points will be expired and has to deduct from the profile which has highest earned points, in this case from profile 34. Output :
PARENT_PROFILE_ID PROFILE_ID CATGCODE EARNED_POINTS BORROWED_POINTS CERT_POINTS DISCARD_POINTS USED BURN_PTS EXPIRE_PTS
3 3 ONL 109 0 109 9 100 -100 -9
3 32 OFL 26 0 223 23 200 -26 0
3 33 OFL 87 0 223 23 200 -87 0
3 34 OFL 110 0 223 23 200 -87 -23
For parent profile id 4 --> ONL category has 109 points, so no need to borrow points from OFL category
Now need to populate tbl_link table at child profile level (i.e. child profiles 42,43,44).
in this case ONL has 100 points, so move the remaining 9 points will be expired. OFL category has 169 points total. need only 100 points (i.e. mutiple of 100) for our process, 69 points will be expired and has to deduct from the profile which has highest earned points, in this case from profile 43. Output :
PARENT_PROFILE_ID PROFILE_ID CATGCODE EARNED_POINTS BORROWED_POINTS CERT_POINTS DISCARD_POINTS USED BURN_PTS EXPIRE_PTS
4 4 ONL 109 0 109 9 100 100 9
4 42 OFL 26 0 169 69 100 -26 0
4 43 OFL 87 0 169 69 100 -18 -69
4 44 OFL 56 0 169 69 100 -56 0
Can someone help with the query. I googled about looping in sql and came to know that Oracle has a feature MODEL to loop in SQL, but i don't have idea on using MODEL clause.
Appreciate your help!
Thanks
SriHi Gurus,
Can someone please help me out.
I've a below tables.
1) tbl_link --> this table contains information at profile level
2) tbl_summary --> this table contains summary at parent profile level derived from tbl_link table
One parent profile contains multiple child profiles and each child profile links to a code (which is B, W, G or P) and the code is linked to a category (i.e. ONL and OFL). In this case code B is linked to category 'ONL' and codes W,G,P linked to OFL category.
ONL category needs 100 points. If it don't have enough points then i need to borrow from OFL category which i'm doing and populating into tbl_summary table at parent profile level.
Now i need to insert data into tbl_link table at profile level with howmany points used, expired based on tbl_summary table. Rule is at the end of month if we add points for each profile in tbl_link table it should come as 0.
with
tbl_SUMMARY as
select 1 as ppid,'ONL' as catgcode, 53 as earned_points,47 BORROWED_POINTS,100 CERT_POINTS,0 DISCARD_POINTS,100 used from dual
union
select 1 as ppid,'OFL' as catgcode, 223 as earned_points,0 BORROWED_POINTS,176 CERT_POINTS,76 DISCARD_POINTS,100 used from dual
union
select 2 as ppid,'ONL' as catgcode, 39 as earned_points,61 BORROWED_POINTS,100 CERT_POINTS,0 DISCARD_POINTS,100 used from dual
union
select 2 as ppid,'OFL' as catgcode, 90 as earned_points,0 BORROWED_POINTS,29 CERT_POINTS,29 DISCARD_POINTS,100 used from dual
union
select 3 as ppid,'ONL' as catgcode, 109 as earned_points,0 BORROWED_POINTS,109 CERT_POINTS,9 DISCARD_POINTS,100 used from dual
union
select 3 as ppid,'OFL' as catgcode, 223 as earned_points,0 BORROWED_POINTS,223 CERT_POINTS,23 DISCARD_POINTS,200 used from dual
union
select 4 as ppid,'ONL' as catgcode, 109 as earned_points,0 BORROWED_POINTS,109 CERT_POINTS,9 DISCARD_POINTS,100 used from dual
union
select 4 as ppid,'OFL' as catgcode, 169 as earned_points,0 BORROWED_POINTS,169 CERT_POINTS,69 DISCARD_POINTS,100 used from dual
tbl_link as
select 1 as ppid,1 as pid, 'B' as code,'ONL' as catgcode, 53 as earned_points from dual
union
select 1 as ppid,12 as pid, 'W' as code,'OFL' as catgcode, 26 as earned_points from dual
union
select 1 as ppid,13 as pid, 'G' as code,'OFL' as catgcode, 87 as earned_points from dual
union
select 1 as ppid,14 as pid, 'P' as code,'OFL' as catgcode, 110 as earned_points from dual
union
select 2 as ppid,2 as pid, 'B' as code,'ONL' as catgcode, 39 as earned_points from dual
union
select 2 as ppid,22 as pid, 'W' ,'OFL' as catgcode, 30 as earned_points from dual
union
select 2 as ppid,23 as pid, 'G' ,'OFL' as catgcode, 29 as earned_points from dual
union
select 2 as ppid,24 as pid, 'P' ,'OFL' as catgcode, 31 as earned_points from dual
union
select 3 as ppid,3 as pid, 'B' as code,'ONL' as tier_catgcode, 109 as earned_points from dual
union
select 3 as ppid,32 as pid, 'W' ,'OFL' , 26 as earned_points from dual
union
select 3 as ppid,33 as pid, 'G' ,'OFL', 87 as earned_points from dual
union
select 3 as ppid,34 as pid, 'P' ,'OFL' , 110 as earned_points from dual
union
select 4 as ppid,4 as pid, 'B' as code,'ONL' as catgcode, 109 as earned_points from dual
union
select 4 as ppid,42 as pid, 'W' as code,'OFL' , 26 as earned_points from dual
union
select 4 as ppid,43 as pid, 'G' as code,'OFL' , 87 as earned_points from dual
union
select 4 as ppid,44 as pid, 'P' as code,'OFL' , 56 as earned_points from dual
final (PARENT_PROFILE_ID,PROFILE_ID,catgcode,EARNED_POINTS,BORROWED_POINTS,CERT_POINTS,DISCARD_POINTS,USED)
as (
select A.PPID PARENT_PROFILE_ID,B.PID PROFILE_ID,A.catgcode,B.EARNED_POINTS,BORROWED_POINTS,CERT_POINTS,DISCARD_POINTS,USED
from tbl_SUMMARY a,tbl_link b where a.ppid=b.ppid AND A.catgcode=B.catgcode
ORDER BY PROFILE_ID
select * from final order by 1;
PARENT_PROFILE_ID PROFILE_ID CATGCODE EARNED_POINTS BORROWED_POINTS CERT_POINTS DISCARD_POINTS USED
1 1 ONL 53 47 100 0 100
1 14 OFL 110 0 176 76 100
1 13 OFL 87 0 176 76 100
1 12 OFL 26 0 176 76 100
2 2 ONL 39 61 100 0 100
2 24 OFL 31 0 29 29 100
2 23 OFL 29 0 29 29 100
2 22 OFL 30 0 29 29 100
3 32 OFL 26 0 223 23 200
3 33 OFL 87 0 223 23 200
3 34 OFL 110 0 223 23 200
3 3 ONL 109 0 109 9 100
4 42 OFL 26 0 169 69 100
4 43 OFL 87 0 169 69 100
4 44 OFL 56 0 169 69 100
4 4 ONL 109 0 109 9 100
Need Output as below :
For parent profile 1, whatever i mentioned above is not correct. Borrowed 47 points from OFL to ONL to make ONL and also from OFL category has 176 points remaining after lending to ONL and using only 100 points, remaining 76 points are discarded. Need to deduct these 76 points also from child profiles. Output will be as below.
PARENT_PROFILE_ID PROFILE_ID CATGCODE EARNED_POINTS BORROWED_POINTS CERT_POINTS DISCARD_POINTS USED BURN_PTS EXPIRE_PTS
1 1 ONL 53 47 100 0 100 -53 0
1 12 OFL 26 0 176 76 100 -26 0
1 13 OFL 87 0 176 76 100 -74 -13
1 14 OFL 110 0 176 76 100 -47 -63
For parent profile id 2 --> ONL category has 39 points, so borrowed 61 points from OFL category to make ONL points 100.
Now need to populate tbl_link table at child profile level (i.e. child profiles 22,23,24).
Borrowed 61 points from OFL and need to deduct this points from the profile which has highest earned points, in this case deduct from profile 24 which has 31 points, from profile 22 which has 30 points. Need output like below
PARENT_PROFILE_ID PROFILE_ID CATGCODE EARNED_POINTS BORROWED_POINTS CERT_POINTS DISCARD_POINTS USED BURN_PTS EXPIRE_PTS
2 2 ONL 39 61 100 0 100 -39 0
2 22 OFL 30 0 29 29 100 -30 0
2 23 OFL 29 0 29 29 100 0 -29
2 24 OFL 31 0 29 29 100 -31 0
For parent profile id 3 --> ONL category has 109 points, so no need to borrow points from OFL category
Now need to populate tbl_link table at child profile level (i.e. child profiles 32,33,34).
in this case ONL has 100 points, so move the remaining 9 points will be expired. OFL category has 223 points total. need only 200 points (i.e. mutiple of 100) for our process, 23 points will be expired and has to deduct from the profile which has highest earned points, in this case from profile 34. Output :
PARENT_PROFILE_ID PROFILE_ID CATGCODE EARNED_POINTS BORROWED_POINTS CERT_POINTS DISCARD_POINTS USED BURN_PTS EXPIRE_PTS
3 3 ONL 109 0 109 9 100 -100 -9
3 32 OFL 26 0 223 23 200 -26 0
3 33 OFL 87 0 223 23 200 -87 0
3 34 OFL 110 0 223 23 200 -87 -23
For parent profile id 4 --> ONL category has 109 points, so no need to borrow points from OFL category
Now need to populate tbl_link table at child profile level (i.e. child profiles 42,43,44).
in this case ONL has 100 points, so move the remaining 9 points will be expired. OFL category has 169 points total. need only 100 points (i.e. mutiple of 100) for our process, 69 points will be expired and has to deduct from the profile which has highest earned points, in this case from profile 43. Output :
PARENT_PROFILE_ID PROFILE_ID CATGCODE EARNED_POINTS BORROWED_POINTS CERT_POINTS DISCARD_POINTS USED BURN_PTS EXPIRE_PTS
4 4 ONL 109 0 109 9 100 100 9
4 42 OFL 26 0 169 69 100 -26 0
4 43 OFL 87 0 169 69 100 -18 -69
4 44 OFL 56 0 169 69 100 -56 0
Can someone help with the query. I googled about looping in sql and came to know that Oracle has a feature MODEL to loop in SQL, but i don't have idea on using MODEL clause.
Appreciate your help!
Thanks
Sri
Maybe you are looking for
-
Pro 2840 No mini DP detection on Macbook Pro 2014 from 'thunderbolt' port. Help!
May have relation to this issue http://forums.lenovo.com/t5/ThinkVision-displays/Lenovo-ThinkVision-Pro2840m-4K-no-DisplayPort-signa... The solution for which is apparently a firmware update (firmware updates are not public and require sending the mo
-
Abap error when user fi asset using tcode KO88
hai gurus, when the user fi_asset team want to use the transaction the system give and error. For gurus information, we are facing the number ranges issue. when document type AA that using number ranges from 100006000 - 100006999 have been hit to max
-
TS1702 Lost shortcuts used in pages on iPad, any ideas?
After using Pages for some time, used keyboard shortcuts, ie type trc and auto expands to. The remaining contents of the room to include; They are still showing on keyboard shortcut list on iPad Any help would be gratefully received
-
How to see full size images when selecting multiple photos
In the Photos app, I click to view a photo and it shows up full screen like it used to. But now when I try to select multiple photos to upload to an email by hitting the send-to button at the lower left, suddenly all the photos are thumbnails at the
-
My phone just randomly stopped working. it won't power on at all. how do i get it fixed?
my phone just quit working out of no where and my lock button doesn't work, i tried charging it and everything, but my phone just won't comeback on. i've read you can get your phone replaced for 270ish, but i don't have insurance, does that still app