Help with MSI Neo 2 Platinum 54g cannot boot from usb stick

Hi all,
Just purchased the new motherboard with my FX55 CPU and I chose this mobo as it seemed the best option at the moment.
A problem I am having is with the USB memory sticks. I have created a memory stick that is bootable. I have tested it on other pc's and it works ok but on the MSI board, it does not work. It recognises it during POST, but it will not boot.
Is there something that I must do for this to work ?

I found it finally! It treats the USB stick as a hard disk, so you have to put it first on the Hard disk priority submenu! I wish it would say that in the manual. I found it by looking at everything in the bios... I hit the Hard disk priority and the usb stick was on 2 and my hard disk on 1. As soon as I swapped them around it worked fine..

Similar Messages

Re: Satellite NB10T-A-101 - cannot boot from USB stick

Hello,
I bought a new Toshiba Satellite NB10T-A-101 and would like to boost performance by changing the HDD by a SSD and install windows 8.1 Pro.
I'm however unable to boot from USB, it always mention:
+Reboot and select proper Boot Device or insert boot media in selected boot device and press a key.+
I already disabled secure boot, used 5+ different usb sticks (work all fine on other laptops).
Can you please tell me what the approach is to change the HDD and then boot from a bootable (UEFI) usb stick.
Thank you.

Hi
The notebook Satellite NB10T-A-101 was equipped with an Intel N2810 CPU which is part of the new Intel Bay Trail-M platform.
This new Intel Bay Trail technology allows the installation of UEFI capable systems:
Win 8 or Win 8.1
Just few questions:
Did you already change the HDD to SSD drive?
If yes, is the new SSD drive recognized in the BIOS?
Did you try to boot from this Win 8.1 USB flash memory stick before you switched to SSD drive?

T61 cannot boot from USB harddrive

My T61 cannot boot from USB harddrive. the drive have VID 058F and PID 6391, the drive is bootable on all other computers. What happened? The bios does not recognize the drive at all.

cwang36, welcome to the forum,
I've had some strange experiences with usb hard drives and would ask you to try the following; when you want to boot from the drive start your T61, go into the BIOS > Startup > Boot menu and you should see the option USB HDD with a "-" in front of it. If I am correct you should exit BIOS, (F10 save and exit), upon restarting enter BIOS again and go again to the Boot menu. This time the USB HDD entry should have a "+" infront of it showing that the drive has been properly recognised.
If my theory is correct, no guarantees, you can then exit Bios with F10 and hopefully boot from the drive.
Hope this helps.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Satellite U925t cannot boot from USB

Hi
I cannot boot from USB flash drive on Satellite U925t. I use bootable USB flash drive inserted (Hiren Boot 15.2, sure booted on another laptop), restart the system. When the splash screen is displayed, press F12 to access the boot menu, selecting USB - but laptop no boot from USB.
Please, Help me.
Thank you very much

From within Windows, try holding SHIFT when you select Shut down. Is there any change then?
Also, try entering the UEFI settings, disabling Secure Boot, and changing UEFI to CSM.
- Peter

Hello.. my hp dv6748us cannot boot from usb nor external harddrive.. may harddisk is already broken

hello.. my hp dv6748us cannot boot from usb nor external harddrive.. may harddisk is already broken so i bought i new one. my internal dvd drive doesnt work also.. can anyone help pls.. thnks

Is USB boot enabled in the bios, it should be able to boot from USB.
Other than that you will need a working DVD drive.

Can i try archlinux on usb if my pc cannot boot from usb?

it seems my old pc cannot boot from usb, only boot from hd or cd.
can i use usb? or i have to burn a cd?

If you have a floppy disk you can put the PLoP bootmanager on it:
http://www.plop.at/en/bootmanagerdl.html
This bootmanager has USB support and can boot from an usb stick even though your bios does not support it.
You can also burn PLoP on a CD. This is good if you want to burn only one generic CD and then be able to boot any usb stick instead of burning one cd for each OS you want to boot.

W541: Cannot boot from USB created with Windows 8 create recovery drive

Hello, I have just bought a W541, and want to install the supplied Windows 8 on an m.2 SSD.I created the recovery drive on a USB following the instructions in the User Manual, but the recover image procedure under Advanced Options cannot find the USB.During the re-image step, it fails to find a drive with a valid image.I've confirmed using the command window available under the Advanced Options that the USB is mounted Searching these forums, I found the following, which describes a similar problem for a T540:https://forums.lenovo.com/t5/ThinkPad-W-Series-Laptops/Lenovo-W540-won-t-boot-from-USB-flash-drive-ThinkPad/m-p/1500902#M39097 This implies that the USB should first be formatted with FAT32 before use, which cannot work, since FAT32 only has a maximum 4 GB partition, whereas when copied to the USB, the Windows 8 recovery drive occupies nearly 10 GB. Is it possible to specify the boot order from insde the BIOS? I could only find an entry under Security about UEFI boot enabling, nothing about the boot order. Can anyone help?Paul

Hello Z, thanks for the reply. I tried another USB drive, and created a recovery drive, as before.This time it was able to detect the presence of the drive when I tapped on the Enter key when starting up, followed by the F12 key. However, there are still problems when I clicked through the options:Choose the languageChoose your keyboard layoutTroubleshootAdvanced optionsSystem Image Recovery At this point I am offered the option Windows 8.1.When I select this, it indicates it is scanning for system disks, and then displays the the pop-up window "Re-image your computer": "Windows cannot find a system image on this computer" Why does this happen if it detected that there was a Windows 8.1 installation on the USB? I've spent a whole day now on this. Luckily, if I can't solve it, the machine is new and I can send it back to Lenovo, and ask to have it re-imaged with the downgrade option to Windows 7.

Help diagnos. flashing question mark on monitor, cannot boot from CD drive

Any ideas? This is an older G3 tower which was "souped Up" wtih USB and Firewire cards, memory
Mac froze in midst of work last week. Now only get flashing question mark supermimposed on image of a floppy drive.
Tried to re install system (OS9) but cannot get ANY CD to boot from CD drive. I reboot, hold down "C" Key with CD in tray ( and i can hear the CD drive working). But the tray opens and ejects/rejects the CD).
I now suspect the problem is NOT the OS but rather a hardware issue.
Am I correct in this assumption? what else could this be?
I am trying to help an older gentleman who has no backups and has some important documents on the HD.If I can boot up, might be able to retrieve those itesm. (and get a newer Mac!)

Not the answer,Dale (thanks anyway)
I read that article.
I cannot boot from any bootable CD.
Inserted the OS install disk as well as third party bootable CD.
with CD in the CD drive tray, I restarted and held down the C key.
Mac restarted but the CD tray popped open. Would not boot from the CD.
That is why I posted query
not only do we have the flashing question mark but bootable CDs are not booting this Mac. So I can do no diagnostics, no repair, not salvage of files.
I am trying to understand where the problem lies. am guessing Hard Drive failure but why should CD also not work?

T520 cannot boot from USB?

I just got the latest T520-4242
I want to use a kind of system installation or maintainance tool in a USB flash driver to boot my laptop.
The USB flash disk is a SanDisk Cruze 8G, but when I enter F12 at the beginning of the boot period, the menu of the boot option cannot recognize this flash disk. I've tried several computers to boot from this usb disk, they all booted well.
I have another USB flash disk SanDisk 8G, it can be recognized during the boot menu option. So it's very weird.

hey icenimbus,
now that is strange since a different flash disk of the same brand and size could be recognized.
is both of them "cruze" or different? have you tried with different USB ports ?
if it is possible, load up your unit and get into the bios and set it to boot from USB only . See if this makes and difference and do try with a lower capacity flash drive.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Cannot boot from USB-DVD on HP Envy 13

Even when the USB DVD drive is selected as the primary boot device or selected as boot device after pressing ESC and F9, I cannot boot from DVD.
According to another post I have:
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-e-g-Windows-8-and-Software/Boot-problem-but-...
I have problems booting from HDD as well, and now I also have problems booting from DVD. I have tried 3 different bootable DVDs.
Does anyone have any ideas to how the booting process could be corrupted any further and how I can regain the boot-from-DVD function? Now I cannot even run the recover DVD and recover the PCs factory settings.
However, I can still boot from HDD following the description from the other posting.
Thanks with best regards

Could you please give me the exact product number for your notebook?
If you need help finding it, you can use the following link:
http://h10025.www1.hp.com/ewfrf/wc/findModel?cc=us&dlc=en&lc=en
Thanks,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

10-K010CA laptop cannot boot from USB

I try everything ( update BIOS, disable securiy boot, setup usb boot first ). But the laptop will not boot any other USB disk except the Recovery USB Disk create by the laptop.
I had a few USB Disk ( windows 7, linux ) which boot normally on HP Desktop PC which set to boot UEFI but will not boot from this laptop.
Will this laptop able to boot from USB Disk at all?

Hi there @azure-cheng
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that you are trying to boot from media that will work on your desktop. I am happy to help with this.
Please post the full product number for your notebook. See the following, if you need help with that information.
How Do I Find My Model Number or Product Number?
Are all of these bootable media UEFI, or is there a mix, of UEFI and legacy?
Have you tried setting your notebook to legacy boot?
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Cannot boot from USB HD on T61 & T61P Why not?

Have bootable WD and Hitachi HDs in external USB enclosures. Have successfully cloned one of these WD) using Acronis. When trying to boot from the USB attached drive using PF12 and selecting the recognized drive on the boot menu get either BSOD or message unable to boot operating system. What gives? Know the WD will boot internally as it was the disk that came with the system. Get the BSOD with this disk in USB port.
Hitachi give me the unable to boot operating system message when trying to boot from USB drive.
Using a TrekStor HD enclosure pn D260U20P10-3 which works fine if I boot the internal HD. Can copy and even backup internal drive to external HD but can not boot from it.

Hello,
As I understand it, Microsoft Windows 7 and earlier operating systems do not support booting natively from a USB Mass Storage Controller interface. The installers do from things like USB-attached optical disc drives and flash drives, but that's not the full operating system.
Support for booting from USB in the main operating system environment might be introduced in Windows 8—I thought I read something about this, but cannot seem to find a reference right now.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Help with MSI K7n2 Delta2 Platinum

Hi everyone,
I need some help with my system, actually I'm having troubles with my machine, often it restarts or freezes so I have to restart it manually.I own a MSI K7n2 Delta2 Platinum, AMD Athlon XP 3000+, 1 GB DDR-400 CORSAIR, ATI Radeon 9800 PRO 128MB AGP. Recently I did a clean install of Windows XP but usually I work for an hour and suddenly it restarts, and after logging in, Windows reports a log event problem; I think I have this problem because of the drivers, so I would like you to help me. Where I can get the best/last drivers for the mainboard and video card? Should I flash the bios? Is common this kind of problems? Help me please.
Thanks!

sortieins, please start an new thread and make a complete listing of your compoenents including your PSU and the amps on the various voltage rails, especially the +12V rail(s).
>>Posting Guide<<

MSI P965 Neo-F (MS-7235) problem booting from USB flash drive

Hi, all!
I was wondering if someone can help me. I am trying to install Windows 7 x64 on my 320GB HDD that is connected to my MSI P965 Neo-F (MS-7235) mobo (The CPU is a Core2Duo 6600 with 6GB of RAM). I created a bootable USB 8GB flash drive using Microsoft's "Windows 7 DVD USB Download Tool" and bootsect.exe (Needed to create a boot sector on the USB drive) from the MS store. I successfully tested the resulting bootable USB drive using freeware MobaLiveCD (Sorry, you'll have to Google "mobalivecd" since this forum doesn't seem to allow external links) running under Windows XP SP3 x86 (32bit). Under MobaLive's QEMU, Windows 7 setup loaded its files and produced an error message basically saying that it could not install Windows 7 x64 under an x86 OS (No surprise there since QEMU is emulating a 32bit processor - The point is that the bootable USB drive I created works).
I then went into my mobo's CMOS and under Advanced BIOS Features -> Boot Sequence -> 1st Boot Device, set the value to "USB-HDD" and rebooted my machine. The USB drive probably was not detected by the mobo under that setting because it proceeded to boot from my HDD which is the 2nd Boot Device. I repeated the same process using each one of the four USB ports in the rear of the mobo (I don't have the optional USB panel that the MSI users manual mentions) to no avail. I also tried setting the 1st Boot Device to "USB-FDD" and repeated the process for each USB port but the mobo still will not boot from the USB drive (It does not recognize it). When I set the 1st Boot Device to "USB-ZIP" and rebooted, the mobo hangs after "Verifying DMI Pool Data ..." which is no surprise since I am not using a USB ZIP drive but a USB flash drive. It appears that under that setting, it recognizes that there is a USB device attached but it is expecting a response (From a USB ZIP drive). I had no idea it would be this frustrating to boot from a USB flash drive! If anyone knows how to make this mobo boot from a USB flash drive, please let me know. Any assistance would be greatly appreciated. Thanks!

Quote from: RemusM on 12-June-14, 17:51:30
The P965 Neo motherboard is 8 years old, so don't expect miracles. .... You need to format the USB stick in the proper way. You may use this utility to do it: hxxp://www.prime-expert.com/flashboot/ Also, it's a good idea to use the first (USB0) connector (controlled by Intel ICH8) for the USB flash drive. Good luck.
Thank You for your fast response, RemusM!
I'm not looking for a miracle. I'm just looking for a mobo that does what it is supposed to do: Allow me to boot from a USB flash drive (I don't think that is too much to ask for even from a board that was made in 2006)!
Thanks for recommending FlashBoot. I see under their "Why FlashBoot" section that it "... does not shift to user the burden of choice between "USB-ZIP" and "USB-HDD" at format time and proper BIOS setup at boot time. ... and every USB disk is formatted in such way that it will work in every environment properly, regardless of current BIOS setting.", so I will give it a try and let you know about the results afterwards.

No GRUB menu when booting from USB stick with new archlinux

Hi,
I want to try archlinux but I do not have a full backup of my current system right now, such that I do not dare to install archlinux on it. I decided to install it on a USB drive and followed the Beginners Guide considering the hints for installations on USB sticks.
The first issue that I had was that I was not able to to install gurb and it complained that no boot partition was available. I started from scratch again but this time choose the partition type EF02 (bios boot partition) instead of the default 0700 (I only have one partition on the stick). This time everything went fine until I rebooted from the USB stick. Instead of a grub menu I got:
GRUB GRUB GRUB GRUB GRUB GRUB
and nothing happened.
I booted again from the boot cd with archlinux and did the following to examine the grub installation again:
mount /dev/sdb1 /mnt
arch-chroot /mnt /bin/bash
grub-install --recheck --boot-directory=/boot /dev/sdb
>Installation finished. No error reported.
grub-mkconfig -o /boot/grub/grub.cfg
>Generating grub.cfg
>Found linux image: /boot/vmlinux-linux
>Found linux image: /boot/initramfs-linux.img
> WARNING: Failed to connect to lvmetad: No such file or directory. Falling back to internal scanning.
> No volume groups found
>Found LMDE MATE Edition (1) on /dev/sda1
>done
I don't know what the grub-mkconfig output should look like...
Do you have any idea how I can fix this?
Thanks in advance!

Welcome to Arch!
EF02 is definitely not the type code you want. That is used for a small partition with no file system which grub needs on GPT disks because it cannot fit into the space on disk. You don't install anything into it and it is 1-2MB.
Perhaps https://wiki.archlinux.org/index.php/Usb_installation would help?

Help with MSI Neo 2 Platinum 54g cannot boot from usb stick

Similar Messages

Maybe you are looking for